Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
mura69 said:
Long short story, i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
I would recommend taking your device to your nearest Oppo service centre
moozer said:
I would recommend taking your device to your nearest Oppo service centre
Click to expand...
Click to collapse
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
mura69 said:
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
Click to expand...
Click to collapse
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
moozer said:
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
Click to expand...
Click to collapse
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Is this of any use?
https://romprovider.com/2019/12/android-10-opo-reno-10x-zoom/
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
Have you found a solution?
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
mura69 said:
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
Click to expand...
Click to collapse
Hey did you get it fixed in the end?
I didn t , i just sold it to a guy who could reflash the chip of the phone . Was my first/last oppo , never again . Still good luck with it !
Related
Hello dears!
(First, sorry for my bad english)
Like sayed in tittle, i bricked my Huawei Ascend G630-U00 phone when i tried to expand ram by sdcard with "Rhoersoft RAM EXPANDER" application. Black screen, Can't starts, no fastboot mode, no led when charger connected !
First, in "Device Manager" i got QHSUSB_BULK when i connect it to windows PC. After one tour on google, i found driver and now it shows Qualcomm HS-USB QDLoader 9008.
I have the stock firmware "UPDATE.APP" (>1,20Go).
Do you know what to do now ? Is it dead ?
I want to ask something: The device is simlocked China provider. I tried to found the same G630-U00, european model but it not existe ! Is it possible for me to download the european stock firmware for G630-U20 to replace the bootloader forever ?
Thanks for help !
I was trying to unlock with gc pro key with sprint unlock to work with gsm carriers and it didnt work for me. So i tried a different formula which i flashed a firmware "ZV3" on Z3X Box and i was running on ZV5. Now the phone doesnt turn on and when connected to computer the usb driver says "Qualcomm Usb USB QDLoader 9008. Any solutions will be highly appreciated and would save me on having to buy a customer a new phone.
First lesson.. don't downgrade any lg latest phones, 2nd dont use boxes too flash it, use lgup so you can get warning of laf downgrade. 3rd search medusa or z3x jtag if they support jtag, or if you smart enough too find pinoits on board for jtag.
xplict310 said:
I was trying to unlock with gc pro key with sprint unlock to work with gsm carriers and it didnt work for me. So i tried a different formula which i flashed a firmware "ZV3" on Z3X Box and i was running on ZV5. Now the phone doesnt turn on and when connected to computer the usb driver says "Qualcomm Usb USB QDLoader 9008. Any solutions will be highly appreciated and would save me on having to buy a customer a new phone.
Click to expand...
Click to collapse
i also bricked my ls775 any one have system dump can write in sdcard may be get download mode thanks
ls775 rom dump.
gdeepp said:
i also bricked my ls775 any one have system dump can write in sdcard may be get download mode thanks
Click to expand...
Click to collapse
dear sr. i have zv5 and zv7 rom dumps of this phone, thing is that partitions are not the same in both versions, so you need to know which one you had on your device, if you know to flash this with sd card i'll provide both software versions for free, as long as you are willing to share the "flashing with sd" tutorial, if it actually works of course. by the way, both versions were dumped with z3x.
ls775 rom dump
hcom said:
dear sr. i have zv5 and zv7 rom dumps of this phone, thing is that partitions are not the same in both versions, so you need to know which one you had on your device, if you know to flash this with sd card i'll provide both software versions for free, as long as you are willing to share the "flashing with sd" tutorial, if it actually works of course. by the way, both versions were dumped with z3x.
Click to expand...
Click to collapse
bro i was bricked on ZV5 so u only upload it on google drive or mega.....also if u have any knowledge about Sd card flash also share it thanks
ls775 qdloader 9008
Well guys, i have one piece in the same condition, I have z3x but there is no support for this model, no firmwares no jtag files or even pinout, if any of you find the way to flash the emmc back in to the phone please let me know. i can offer you the extracted files for version zv8 and zva, if someone needs them to test or whatever i am willing to share.
have a nice day
lo solucione amigos
Search of the file .mbn for QPSP. For H932 - to restore bricks. Through qualcomm 9008. Or any help on getting out of the state of a brick.
B0PoH said:
Search of the file .mbn for QPSP. For H932 - to restore bricks. Through qualcomm 9008. Or any help on getting out of the state of a brick.
Click to expand...
Click to collapse
this file not exist .
you need a flashing box like octoplus... to boot the phone , take it to a repair shop.
Thanks for the answer. Is octoplus in a nutshell or how to restore using octoplus? There, too, I need the mbn file as far as I understand.
ufs8998 use .elf file
I tried to search for a long time. Finally, end with the box.
sandking707 said:
ufs8998 use .elf file
I tried to search for a long time. Finally, end with the box.
Click to expand...
Click to collapse
Thanks for the answer and not tell me where to download ??
sandking707 said:
ufs8998 use .elf file
I tried to search for a long time. Finally, end with the box.
Click to expand...
Click to collapse
B0PoH said:
Thanks for the answer and not tell me where to download ??
Click to expand...
Click to collapse
He said he never found a place to download and used Octopus box instead.
ChazzMatt said:
He said he never found a place to download and used Octopus box instead.
Click to expand...
Click to collapse
I have Octoplus, but it sews only in a Download mod. Perhaps the new version has the ability to sew flash memory. Who can flash the phone remotely on Octoplus??
B0PoH said:
I have Octoplus, but it sews only in a Download mod. Perhaps the new version has the ability to sew flash memory. Who can flash the phone remotely on Octoplus??
Click to expand...
Click to collapse
you need octopus with box not the cracked one because you must disassemble the phone and connect the cable.
Maybe someone already has a dump file from lg v30 h932 T-mobile if there is, please contact me. After searching for solutions, there were two possible solutions. The phone and port 9008 sees XiaoMiFlash but you need to correctly convert the KDZ file to XiaoMiFlash format. The second is still looking for a nbm file that can sew QPSP. Or options for converting KDZ to nmb. Who has a tutorial on flashing the phone through octoplus and connecting via cable to JTAG?
@runningnak3d is the expert. Maybe he may have some insight.
I hope you don't me mentioning you here Brian.
----Aakash
I don't know of any T-Mobile firehoses that have leaked... not just the H932, but ANY LG T-Mobile phone. Since T-Mobile uses their own RSA cert for signing, and the firehose is signed just like the firmware, there is less of a chance of it leaking.
Now with that said, if Octopus can flash an H932 in EDL mode (9008), then they got the firehose from somewhere. However, those douche nozzles encrypt the firehose, and you need one of their boxes to use it. I have contemplated buying one, and then sniffing the USB traffic to obtain the decrypted firehoses for every phone that I can get my hands on. You should never have to pay for something that they got from a leaked source.
-- Brian
B0PoH said:
Maybe someone already has a dump file from lg v30 h932 T-mobile if there is, please contact me. After searching for solutions, there were two possible solutions. The phone and port 9008 sees XiaoMiFlash but you need to correctly convert the KDZ file to XiaoMiFlash format. The second is still looking for a nbm file that can sew QPSP. Or options for converting KDZ to nmb. Who has a tutorial on flashing the phone through octoplus and connecting via cable to JTAG?[/QUOT]
How to backup dump file from working LG v30 and flash it on "9008 bricked phone". (I have two v300L phones. One is working another one is hard bricked)
Click to expand...
Click to collapse
i tried to flash an ofp file following this guide:
[TOOL] Oppo/Realme Flash .OFP File on Bootloader
A tool to flash .ofp files in bootloader mode without needing MSM Tool, an alternative to official realme tool. THE DEVICE MUST HAVE THE BOOTLOADER UNLOCKED Features soft unbrick install stock firmware switch device region Credits...
forum.xda-developers.com
the phone worked fine but the fingerprint doesn't work anymore.
after looking it up i learned that the persist.img probably got damaged.
can someone provide me with a backup of the file?
so after looking it up turns out both the engineermode and fingerprint folders in "root/mnt/vendor/persist" are empty
if someone who has rooted their phone provided me with the persist folder i believe i can find a solution
Im having the exact problem after using that tool. found any solution yet?
nothing yet
i think the the solution at this point is taking it to the service center so they can flash it
I am having the same problem, but with Realme GT2 pro. Any solution other than service center?
I got my phone bricked. I tried to flash global rom and switched back to China using Realme Flash Tool which is a bat file I found here. I cannot enter recovery/fastboot/edl. How am I going to fix it? I have downloaded the original firmware file along with msm download tool. Any way to access to msm? Please help me.
same issue here , my phone stuck with bootloop
my phone came with the chianes rom so i unlock the bootloader and install the global one from here then everything were fine but when i try to re-lock the bootloader again this happen
Link:
VEED - video-1658817419.mp4
Make stunning videos with a single click. Cut, trim, crop, add subtitles and more. Online, no account needed. Try it now, free. VEED
www.veed.io
beacuse you tried flashing with locked bootloader. Only hope is service center. or MSM download tool. Some guys are selling code for 3-10 USD. I dont have contact. So dont PM me.
I've already unlocked bootloader. Pc doesn't seem to detect it. I don't know what to do. Only if I can enter edl mode, maybe I can flash it once again
Zarni96 said:
I've already unlocked bootloader. Pc doesn't seem to detect it. I don't know what to do. Only if I can enter edl mode, maybe I can flash it once again
Click to expand...
Click to collapse
go to service center ,You did not restore boot