i tried to flash an ofp file following this guide:
[TOOL] Oppo/Realme Flash .OFP File on Bootloader
A tool to flash .ofp files in bootloader mode without needing MSM Tool, an alternative to official realme tool. THE DEVICE MUST HAVE THE BOOTLOADER UNLOCKED Features soft unbrick install stock firmware switch device region Credits...
forum.xda-developers.com
the phone worked fine but the fingerprint doesn't work anymore.
after looking it up i learned that the persist.img probably got damaged.
can someone provide me with a backup of the file?
so after looking it up turns out both the engineermode and fingerprint folders in "root/mnt/vendor/persist" are empty
if someone who has rooted their phone provided me with the persist folder i believe i can find a solution
Im having the exact problem after using that tool. found any solution yet?
nothing yet
i think the the solution at this point is taking it to the service center so they can flash it
I am having the same problem, but with Realme GT2 pro. Any solution other than service center?
Related
Hello together,
today i wanted to rebrand my honor 9 from STF-L00 to STF-L09 and everything worked fine for me at the beginning. I unlock my bootloader and then i used the update.bat and follow the instructions. It installed TWRP. After a while nothing happened and i was still in the fastboot mode. In the fastboot mode i saw that my bootloader is locked again.
Now i have no OS and cannot used adb via fastboot, it does not recognize any device detected.
I downloaded MultiTool and it says i have installed STF-L09 now on my phone.
Info:
According to MultiTool is STF-L09 installed
Bootloader and FRP are locked
I just have Huawei eRecovery, but this is not working (Pacakge info fails)
I have no rom, because my phone is booting only in eRecovery
adb fastboot does not get recognized my phone.
Have all drivers needed on pc for adb to work.
HiSuite doesn't support recovery on this device.
Please help me, i don't know what i should do and i really start to despair. :crying::crying::crying:
Thank you very much
I have pretty much the exact same problem. The only difference is I was trying to rebrand from AL10 to L09. Got the same error in the same stage of rebranding, can access the exact same things as you, same goddamn FRP lock etc. Same all the way through except for starting from AL10 in stead of L00.
I have not found any free solution, the best I could find is DC Phoenix whose program claims that it "Can write firmware by fastboot with locked bootloader and locked FRP!" The thing is, it will cost 15 Euros to use this function in their program, and after paying etc. it is only available for 72 hours. At this moment I don't have access to a computer for the next 72 hours, so I have decided to wait a short while until I have a computer available for a 72-hour period. While I guess it would only take a short time, I realise now that nothing is ever as easy as it seems with Huawei and their absolute **** software... hence I want to wait for being able to use all 72 hours before paying.
This link has their guide to what needs to be done:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
If you want to give it a try, it's the one possible solution I've found after MUCH googling. Though I remain hopeful that someone else on this forum might have a better (free) solution!
Hello Sanktgoran,
at first thank you very much for your help.
I have a question about the DC Unlocker. When i use this and write a new firmware by DC Unlocker, then i don't have to rebrand again?
Which rom do i should use to write on my phone?
Should i use the STF-AL00 rom or STF-L09 rom or it doens't matter?
Multitool says that i have STF-L09 on my phone, but my phone have no OS, because it doesn't boot.
Thanks
I'm not sure actually which one to use. I think you should go with the L09, since that is what the phone "thinks" it is at the moment. If it works to instll the L09 Firmware via DC unlocker, I think that would be the rebranding done as well. The way I understand this situation we are both in, our phones are rebranded to L09, just the actual L09 OS isn't really installed properly, and the FRP lock prevents us from unlocking bootloader, which in turn prevents us from completing the installation of L09. So by using the DC Unlocker to bypass the locks and installing the firmware, the process should then be complete.
I'm not sure about this though, it's just how i think it is. It might be that using DC will install the firmware stably and all is well, and it might be that it will install some of it and then the phone can at least boot into an incomplete OS where we could disable the FRP and bootloader locks, and thus be able to use the Update function in the HWOTA script to get things finished. Either way, I'm 99% sure that using the DC Unlocker will get us further along the path to a european Honor 9 than we are at this stage. I'm going to attempt it later today or perhaps tomorrow I think. After all, 15 euros is a small amount to spend compared to the cost of the actual phone...
Did you also copy an OEMinfo file for L09 into your adb/fastboot folder and run this command before using the HWOTA script?
ADB push oeminfo /tmp/oeminfo
ADB shell "dd if=/tmp/oeminfo of=/dev/block/platform/hi_mci.0/by-name/oeminfo"
I did, I'm not 100% sure what it does/is supposed to do, but I think it has made it so that the phone thinks it's done and rebranded, and tries to boot into L09, but since the L09 installation wasn't completed in the HWOTA script, it can't boot because firmware stuff is missing. That has me thinking that it's the L09 and not AL00 which you should use with DC Unlocker.
Did you check https://forum.xda-developers.com/honor-9/help/soft-bricked-honor-9-trying-to-root-t3737967 ?
Finally, it worked for me everything fine.
Here is one tip from me:
I downloaded at first the rom from a website and started to flash, but it failed.
After a long time of searching and asking, i got help.
You have to download directly from the DC Phoenix the rom (with the custominization file) and flash.
When you don't know how, just post here and i will write a short guide.
Thanks for helping. :good:
That's great, glad things worked out for you! Was it the full firmware file you downloaded from DC Phoenix, the ~4 gigabyte update.app file? Or the three .zip files, update.zip, update_data_full_public.zip and update_full_stf-L09_hw_eu? Do you download it from their website or through the DC Unlocker program? How big was the entire download? I'm on a limited monthly data kind of thing, just curious how big the download is.
Sanktgoran said:
That's great, glad things worked out for you! Was it the full firmware file you downloaded from DC Phoenix, the ~4 gigabyte update.app file? Or the three .zip files, update.zip, update_data_full_public.zip and update_full_stf-L09_hw_eu? Do you download it from their website or through the DC Unlocker program? How big was the entire download? I'm on a limited monthly data kind of thing, just curious how big the download is.
Click to expand...
Click to collapse
I use the download function from DC Phoenix.
When you open DC Phoenix, just click "Download Files" and a website will open, where you can search for the rom.
Search for "STF-L09" and you will get all roms for the STF-L09. I prefer to use this rom:
Stanford-L09_C432B130_Firmware_Belgium_Germany_France_Netherlands_Portugal_Switzerland_Spain_Italy_Aus
And for every rom you should download the customization file. They are directly together:
Stanford-L09_C432B130_update_data_customization_hw_eu.APP
You have to download both .APP files and the both files are in total almost 3,2 GB.
You open DC Phoenix and open the files there.
The Firmware you open in "Update File"
The customization file you open in "Customization File (optional)"
You connect your phone via fastboot and then you can start to update.
I don't know from which country you are, so i don't know which version of rom do you need.
When you download the rom which i downloaded before, you have just the B130 Version. But theres is already B182 existing. You can download the new rom via your phone in the settings.
Here is also the same guide from DC Unlocker (except of the part how you can download the rom).
https://www.dc-unlocker.com/huawei-phone-flashing-in-fastboot
Somehow its possible to flash firmware in dc Phoenix and having a locked Bootloader.
Shouldnt it be possible to use config.txt and flash twrp as recovery and then flash ur full stock?
Im asking cause i m not able to unlock the bootloader. The V+ Button is broke ( Mainboard related) and i cant agree to unlock after entering my code.
Hi I have a OPPO AX5(CPH1851)
Need To flash it for pass code forgotten and in recovery for wiping need passcode (it's my sister's phone)
Can't find google account.(it's my sister's phone)
Each Firmware that i downloaded Have A "MSM Downoad Tool" in it and it need (username/password)
Anyone can help me?
I've tried Cracked MSM Download tools _Not worked
I've tried Oppo tool enabler _notworked
if any one have any tool that can help me, Or a file, please leave a replay,Thank You.
I have a OPPO AX5(CPH1851) here's IMEI:-862877040592402 and Stamp:-17095c00000 and anyone send me Token plz?
dashti.95 said:
Hi I have a OPPO AX5(CPH1851)
Need To flash it for pass code forgotten and in recovery for wiping need passcode (it's my sister's phone)
Can't find google account.(it's my sister's phone)
Each Firmware that i downloaded Have A "MSM Downoad Tool" in it and it need (username/password)
Anyone can help me?
I've tried Cracked MSM Download tools _Not worked
I've tried Oppo tool enabler _notworked
if any one have any tool that can help me, Or a file, please leave a replay,Thank You.
Click to expand...
Click to collapse
Hey i have a version of MSM Download tool that works also a firehose file, could you send me the firmware file you are using as im after one for my oppo AX5
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
mura69 said:
Long short story, i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
I would recommend taking your device to your nearest Oppo service centre
moozer said:
I would recommend taking your device to your nearest Oppo service centre
Click to expand...
Click to collapse
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
mura69 said:
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
Click to expand...
Click to collapse
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
moozer said:
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
Click to expand...
Click to collapse
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Is this of any use?
https://romprovider.com/2019/12/android-10-opo-reno-10x-zoom/
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
Have you found a solution?
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
mura69 said:
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
Click to expand...
Click to collapse
Hey did you get it fixed in the end?
I didn t , i just sold it to a guy who could reflash the chip of the phone . Was my first/last oppo , never again . Still good luck with it !
I just bought Realme 7 Pro 8/128 from Amazon.de warehouse (EU version) and when I started it, I found that the fingerprint sensor doesn't work - it doesn't allow to scan any fingerprints, only message "Add a fingerprint" is blinking, without even showing the place to put the finger.
Video of the problem
I Googled this problem and found that it usually happens when somebody unlocks the bootloader (and probably flashes magisk), which someone might do before sending it back to Amazon, but I didn't find any resolution to it. I have seen that OEM unlock in Developer options was enabled, but the bootloader was locked.
I have seen hints that it couls fix flashing the full OFP firmware, so I unlocked the bootloader, downloaded a few OFP firmwares, Realme Flash Tool can't flash any of them - it throws error "Cannot find central directory". I didn't have any luck also with MsmDownloadTool - version 1.x or 2.x that is bundled with the firmware asks for login and password. Version 4.x or 5.x says that no file is found or that it doesn't match the tool version.
I was able to flash OZIP firmware from stock recovery and lock the bootloader again, but it didn't solve the problem.
Any ideas how the fingerprint scanner can be fixed?
I have exactly the same problem
nirmago said:
I have exactly the same problem
Click to expand...
Click to collapse
Did you have it also from the beginning, or it started after you unlocked the bootloader? Did you try flashing some custom ROM, or Android 11, if it works there?
So in the end I sent the phone to Realme service for warranty repair and they fixed it by reflashing the firmware. Pity that we can't do it by ourselves, as Realme Flash tool doesn't work and MsmDownloadTool requires login credentials of authorized service..
lapist said:
So in the end I sent the phone to Realme service for warranty repair and they fixed it by reflashing the firmware. Pity that we can't do it by ourselves, as Realme Flash tool doesn't work and MsmDownloadTool requires login credentials of authorized service..
Click to expand...
Click to collapse
Where are u from bro
i bought the phone too and i had the same problem.
I couldn't flash the firmware in bootmode or recovery because it didn't display the install from storage item.
I sent the phone for assistance and when I returned everything worked fine: finger print and install from storage in recovery mode.
The firmware installed in assistance is RMX2170EU_11_OTA_0380_all_ePoA62jksSTW.ozip (check the download if it is suitable for your region)
I got my phone bricked. I tried to flash global rom and switched back to China using Realme Flash Tool which is a bat file I found here. I cannot enter recovery/fastboot/edl. How am I going to fix it? I have downloaded the original firmware file along with msm download tool. Any way to access to msm? Please help me.
same issue here , my phone stuck with bootloop
my phone came with the chianes rom so i unlock the bootloader and install the global one from here then everything were fine but when i try to re-lock the bootloader again this happen
Link:
VEED - video-1658817419.mp4
Make stunning videos with a single click. Cut, trim, crop, add subtitles and more. Online, no account needed. Try it now, free. VEED
www.veed.io
beacuse you tried flashing with locked bootloader. Only hope is service center. or MSM download tool. Some guys are selling code for 3-10 USD. I dont have contact. So dont PM me.
I've already unlocked bootloader. Pc doesn't seem to detect it. I don't know what to do. Only if I can enter edl mode, maybe I can flash it once again
Zarni96 said:
I've already unlocked bootloader. Pc doesn't seem to detect it. I don't know what to do. Only if I can enter edl mode, maybe I can flash it once again
Click to expand...
Click to collapse
go to service center ,You did not restore boot