Upgrade to Nougat for Huawei P9 Plus VIE-L09CO2 (Vodafone) is in place.
Good evening to the whole group. I am trying to download it through 'Firmware Finder',
but I would say to all those concerned, with the brand "Vodafone" which is output upgrade to Nougat with version VIE-L09C03B334. I hope that somewhere they can mettre the zipped file so it can be used with 'dload'.
Dear friends of the group to me I got the update successfully completed. As I said I used 'Firmware Finder', using the guidelines in the file that I enclose. hoping that you understand that since the re-translation has made Google Translation ', a post to a thread that is on the XDA forum. Good update to you.
Follow my instructions
- Make sure you are on VIE-L09C432B181
- Make sure the battery over 60%
- Now make a backup from your PC with HiSuite
- Now install the firmware Finder from the Play Store (link)
- Now go to Settings -> Advanced Settings -> Security -> Device Administration - >> NOW activate "Unknown sources"
- Now Open Firmware Finder and select the model (eg: VIE-L09C432)
- Now click on "GET FIRMWARE LIST"
- Now go to the Finder firmware settings and activate "Installing via system update"
- You will see a pop up "Huawei Firmware Proxy Finder" click "download ADDON"
- When the download is complete, install on your phone and open it
- Re open the finder firmware settings and check if "Installation using the updated" activated system, if you do not activate it for the 2nd time
- Now the firmware Finder and select the model as VIE-L09C432 (only if the model has this)
- Now click on "GET FIRMWARE LIST" and select first one where you see "VIE-L09C432B360" Date: 03/03/2017 TypeTA Size: 1.334GB
- If you selected "VIE-L09C432B360" Now you will see an option "Send Firmware Updater" click it
- Now it will automatically open a page "Firmware Finder Proxy"
- Now go to the Wi-Fi and connect to a Wi-Fi and Now "Network Edit" then "Show Advanced Options" Now select "Proxy" as "Manuel"
- In writing on the proxy host name: localhost
- In writing on the proxy port: 8080
- Now go to Settings -> System Update now, and click "Check for updates"
- Now you are going to see the name of an update "VIE-L09C432B360VIE-L09C432B360 -1,430,186,368.00 B" do not download this! this is not the right one!
- Back to System Update and you'll still get this the wrong update, do not worry, click on "MENU" and click on "Download the latest full package"
- You will now see the correct update "VIE-L09C432B360 2.39 GB" Now just click "hotfix"
- Do not download it, do not worry, just go to the Wi-Fi settings and disable "Proxy"
- Go back to the system upgrade and click pause and resume
- Wait until the end of the download, and after the phone will automatically install the update has been downloaded
If you have followed my instructions, it will be installed with B360 success.
Obviously you have to follow the signs quele for your version of firmware and that all root functions and how this suite if you had the miss and the directions that are on this forumo apply unfortunately for Andorid 6 'Marshmallow'.
Sorry for any typos or language.
Download fails at 74 %
Try´d this not working download fails at 74 %
Grlschia said:
Upgrade to Nougat for Huawei P9 Plus VIE-L09CO2 (Vodafone) is in place.
Good evening to the whole group. I am trying to download it through 'Firmware Finder',
but I would say to all those concerned, with the brand "Vodafone" which is output upgrade to Nougat with version VIE-L09C03B334. I hope that somewhere they can mettre the zipped file so it can be used with 'dload'.
Dear friends of the group to me I got the update successfully completed. As I said I used 'Firmware Finder', using the guidelines in the file that I enclose. hoping that you understand that since the re-translation has made Google Translation ', a post to a thread that is on the XDA forum. Good update to you.
Follow my instructions
- Make sure you are on VIE-L09C432B181
- Make sure the battery over 60%
- Now make a backup from your PC with HiSuite
- Now install the firmware Finder from the Play Store (link)
- Now go to Settings -> Advanced Settings -> Security -> Device Administration - >> NOW activate "Unknown sources"
- Now Open Firmware Finder and select the model (eg: VIE-L09C432)
- Now click on "GET FIRMWARE LIST"
- Now go to the Finder firmware settings and activate "Installing via system update"
- You will see a pop up "Huawei Firmware Proxy Finder" click "download ADDON"
- When the download is complete, install on your phone and open it
- Re open the finder firmware settings and check if "Installation using the updated" activated system, if you do not activate it for the 2nd time
- Now the firmware Finder and select the model as VIE-L09C432 (only if the model has this)
- Now click on "GET FIRMWARE LIST" and select first one where you see "VIE-L09C432B360" Date: 03/03/2017 TypeTA Size: 1.334GB
- If you selected "VIE-L09C432B360" Now you will see an option "Send Firmware Updater" click it
- Now it will automatically open a page "Firmware Finder Proxy"
- Now go to the Wi-Fi and connect to a Wi-Fi and Now "Network Edit" then "Show Advanced Options" Now select "Proxy" as "Manuel"
- In writing on the proxy host name: localhost
- In writing on the proxy port: 8080
- Now go to Settings -> System Update now, and click "Check for updates"
- Now you are going to see the name of an update "VIE-L09C432B360VIE-L09C432B360 -1,430,186,368.00 B" do not download this! this is not the right one!
- Back to System Update and you'll still get this the wrong update, do not worry, click on "MENU" and click on "Download the latest full package"
- You will now see the correct update "VIE-L09C432B360 2.39 GB" Now just click "hotfix"
- Do not download it, do not worry, just go to the Wi-Fi settings and disable "Proxy"
- Go back to the system upgrade and click pause and resume
- Wait until the end of the download, and after the phone will automatically install the update has been downloaded
If you have followed my instructions, it will be installed with B360 success.
Obviously you have to follow the signs quele for your version of firmware and that all root functions and how this suite if you had the miss and the directions that are on this forumo apply unfortunately for Andorid 6 'Marshmallow'.
Sorry for any typos or language.
Click to expand...
Click to collapse
This works takes time but it work´s
[email protected] said:
This works takes time but it work´s
Click to expand...
Click to collapse
The problem that the downloading takes a bit of time because the package is 2.6 GB. I even though the fiber 100 took almost a quarter of an hour. Then there is also the fact that the server knows where the file can be blocked by our connections. Try several times. One important thing and that the proxy anyway before starting the actual download is disabled.
I followed the steps, but I find myself with a version probably wrong, NRD90M test-keys, what should I do? Many basic functions do not work, I don't even have access to update function in settings.
bayers97 said:
I followed the steps, but I find myself with a version probably wrong, NRD90M test-keys, what should I do? Many basic functions do not work, I don't even have access to update function in settings.
Click to expand...
Click to collapse
I do not know which version of firmware you had, because I specified that ranged follow the directions according to the Roma who had one installed. My advice and try all over again. Keep in mind that just ago, having again put the VIE-L09C02B133 version and installing the new version directly using the TWRP recovery, me too I came out the same words 'NRD90M test-keys' that came out to you. In fact, now I'm starting all over again, starting to come from the VIE-L09C02B128 version and to follow.
Related
I just acquired a Huwei U8652. I guess it's supposed to be a lot like the Sonic.
I can't get any of the roots/roms for the Sonic to work.
Has anyone had any success getting the "Fusion" rooted/rom'd?
Thanks
Anyone? I'd really like some input
search U8650
bulltproof said:
Anyone? I'd really like some input
Click to expand...
Click to collapse
here is the thread
http://forum.xda-developers.com/showthread.php?t=1304678
U8652 Root
This will get you a Partial root.. Enough to Remove a Majority of the Pre-Loaded apps.. Thanks to a Chinese site for the info..
Only a few items that are pre-loaded that I was unable to remove via Titanium backup/other s/w methods:
Docs to go 3.003
Layar 5.0.2
Twitter 2.0.2
Uno 3.1.3
YP 3.0.3
All the above have : "Failed to locate the apk file." error in TB..
I will be Including the original link in the post.. I have cleaned up the English Translation to match more what you see on the phone as well..
(1) Activate "USB debugging": Settings - Applications - Development - USB debugging;
(2) ADB driver installed: When I plug this phone in to my computer, It has drivers listed in a virtual cd-rom drive.
(3) Dial, *#*#2846579#*#*
(4) Go to: Project Menu - background Setting - Log Switch - LOG on;
(5) Download DooMLoRD_v3_ROOT-zergRush-busybox-su, extract.
(6) Connect the phone to computer, make sure ADB is active and driver installed.
(7) Execute runme.bat, follow the prompts, Phone will auto restart.
I did have to run it a 2nd time to get a successful Root, but it worked well (Except the above isues) I also had a wireless issue after successfully completing the above ..
Couldn't connect to any WiFi networks.. Performed a Factory reset, and all uninstalled apps remained removed.
Original Links:
Am unable to post outside links as I am a new member..
bbs.hiapk com/thread-3098038-1-1.html
Hope this helps..
Worked for me!
Note: don't exit the menu after setting the log, just flick over to your pc and run runme.bat
Infopumper said:
This will get you a Partial root.. Enough to Remove a Majority of the Pre-Loaded apps.. Thanks to a Chinese site for the info..
Only a few items that are pre-loaded that I was unable to remove via Titanium backup/other s/w methods:
Docs to go 3.003
Layar 5.0.2
Twitter 2.0.2
Uno 3.1.3
YP 3.0.3
All the above have : "Failed to locate the apk file." error in TB..
I will be Including the original link in the post.. I have cleaned up the English Translation to match more what you see on the phone as well..
(1) Activate "USB debugging": Settings - Applications - Development - USB debugging;
(2) ADB driver installed: When I plug this phone in to my computer, It has drivers listed in a virtual cd-rom drive.
(3) Dial, *#*#2846579#*#*
(4) Go to: Project Menu - background Setting - Log Switch - LOG on;
(5) Download DooMLoRD_v3_ROOT-zergRush-busybox-su, extract.
(6) Connect the phone to computer, make sure ADB is active and driver installed.
(7) Execute runme.bat, follow the prompts, Phone will auto restart.
I did have to run it a 2nd time to get a successful Root, but it worked well (Except the above isues) I also had a wireless issue after successfully completing the above ..
Couldn't connect to any WiFi networks.. Performed a Factory reset, and all uninstalled apps remained removed.
Original Links:
Am unable to post outside links as I am a new member..
bbs.hiapk com/thread-3098038-1-1.html
Hope this helps..
Click to expand...
Click to collapse
I have u8652, superoneclick rooted, have superuser, romtoolbox and cache cleaner. I got the same "failed to locate apk file" message in TiBu when trying to uninstall layar, twitter etc. swapped it for root installer and it is saying "unable to uninstall app due to unknnown error" Is the above 7 steps the fix for the error messages?? im a complete noob to this. didnt even know what root was till a day or so ago...
also cant figure out how to wipe dalvic cache. tried the vol down power button boot but it goes straight to a "firmware update, unpacking, update failed" screen and freezes.. i know im missing somethething...
Unable to delete stock apps
Root Browser Lite will delete all those apps. I deleted a little too much with RBL and now I can't get my phone to work at all! Trying OEM Rom now.
Infopumper said:
This will get you a Partial root.. Enough to Remove a Majority of the Pre-Loaded apps.. Thanks to a Chinese site for the info..
Only a few items that are pre-loaded that I was unable to remove via Titanium backup/other s/w methods:
Docs to go 3.003
Layar 5.0.2
Twitter 2.0.2
Uno 3.1.3
YP 3.0.3
All the above have : "Failed to locate the apk file." error in TB..
I will be Including the original link in the post.. I have cleaned up the English Translation to match more what you see on the phone as well..
(1) Activate "USB debugging": Settings - Applications - Development - USB debugging;
(2) ADB driver installed: When I plug this phone in to my computer, It has drivers listed in a virtual cd-rom drive.
(3) Dial, *#*#2846579#*#*
(4) Go to: Project Menu - background Setting - Log Switch - LOG on;
(5) Download DooMLoRD_v3_ROOT-zergRush-busybox-su, extract.
(6) Connect the phone to computer, make sure ADB is active and driver installed.
(7) Execute runme.bat, follow the prompts, Phone will auto restart.
I did have to run it a 2nd time to get a successful Root, but it worked well (Except the above isues) I also had a wireless issue after successfully completing the above ..
Couldn't connect to any WiFi networks.. Performed a Factory reset, and all uninstalled apps remained removed.
Original Links:
Am unable to post outside links as I am a new member..
bbs.hiapk com/thread-3098038-1-1.html
Hope this helps..
Click to expand...
Click to collapse
This small guide was succesfull for me. Hope this will help you guys!
For L09C432B360
1. Install Firmware Finder
2. Enter in Firmware Finder Settings and select Install via system update.
3. You'll get prompt to Download FF Proxy, select Download Addon.
4. Install FF Proxy and dont run
5. Go back to FF and select GET FIRMWARE LIST
6. Select VIE-L09C432B360 Size: 1.334
7. Select SEND FIRMWARE TO UPDATER
8. FF Proxy now will start
9. Go to Wireless and set proxy to: localhost with 8080 port
10. Go to system settings and chose Updater
11. You'll get VIE-L09C432B360 available -> DONT CLICK TO UPDATE/DOWNLOAD
12. Go to wireless settings and disable proxy ( set it to none)
13. Go back to updater and chose Download latest full package
14. Update and VOILA!
GOOD LUCK
That is exactly what I did few days ago and work just fine for me. Now am on android N and Emiui 5
The same, upgrade successfull now, I discover this new EMUI
zubyro said:
This small guide was succesfull for me. Hope this will help you guys!
For L09C432B360
1. Install Firmware Finder
2. Enter in Firmware Finder Settings and select Install via system update.
3. You'll get prompt to Download FF Proxy, select Download Addon.
4. Install FF Proxy and dont run
5. Go back to FF and select GET FIRMWARE LIST
6. Select VIE-L09C432B360 Size: 1.334
7. Select SEND FIRMWARE TO UPDATER
8. FF Proxy now will start
9. Go to Wireless and set proxy to: localhost with 8080 port
10. Go to system settings and chose Updater
11. You'll get VIE-L09C432B360 available -> DONT CLICK TO UPDATE/DOWNLOAD
12. Go to wireless settings and disable proxy ( set it to none)
13. Go back to updater and chose Download latest full package
14. Update and VOILA!
GOOD LUCK
Click to expand...
Click to collapse
Where wireless ?Your mean WiFi?
Step 4.5 switch on again Install via System Update, my went to off again after I installed the FF Proxy program in step 4
regards mb
Hey ! I got an issue...
During the update in "Updater" app, when its on 74%, Updater close the process and restart from 60%, i wait 74%.. the same. It's a loop.
What can i do ? Sorry for my bad english, and thank you!
EDIT: ok problem solved, i used the proxy during the download and it worked. My emui5 works but i have not Huawei ID app, theme store doesn't work and if i reboot i got an error "You device has failed verification code and may work not properly". What can i do? Thanks a lot for your support !
[SOLVED: installed b181 rollback and retry with CORRECT INSTRUCTION via firmware finder]
Same thing.. totally unhappy. Read my previous comment about camera. The aperture mode is not working properly anymore. Some other things, too.. battery just draining on my.. almost as worse as iPhone. I don't see any advantages.. does anyone?
I find everything unclear. Specially the drop down push messages.. Will def. Roll back
Mine simply won´t update. Fails on 5% on update. Tried to reset the phone. Download eRecovery. It wont do nothing.. Everything fails.
Do i need to unlock the Bootloader?
Same problem...74% loop&restart from 61%.....How we can solve this problem?
Just wanted to say cheers for the guide. Managed to update my vodafone uk branded to 7. Make sure when your searching for your new firmware that you do it on your 4g not wifi. Then switch to your wifi to download
Hmmmm. Updated my O2 P9+ fine to C40B330, all looking good - although the battery drain seems high, been hitting my 20% notification two days in a row and never normally see it.
Anyway, went to use Android Pay and I get an error that it can't be used as it can't verify my version of Android. Tried uninstalling and reinstalling. cleared cache, cleared data.
I'm not rooted, didn't unlock the bootloader, just followed the instructions above. Any ideas? Had a search of the forum, there's lots of tips for Oneplus owners but nothing much for Huawei.
Just checked and B332 has been released... I'll flash that and see if it's any better at either battery life or Android Pay!
Trouble is, now I've sampled Nougat I can't go back to MM So I looked at my upgrade options.... I can pay off my P9+ and get a P10 for £60 and an extra £5 a month.... Hmm......
Hello,
I'm with VIE-L09 and i'm already on C432B320 but i want to re-flash so this method don't work anymore, how to re-flash safe without root?
Found b370 in FF (now i have b360) for c432 and tried to send via Ff proxy
Ota version (224mb on FF...640 mb on Huawei updater )
System reboot but Ask only for reboot / wipe
Tried also full update but no luck
Yes, tried dload/recovery method too, didn't work just says "update package doesn't exist" ...
---------- Post added at 07:55 AM ---------- Previous post was at 07:24 AM ----------
I managed to install it via servicemenu, *#*#2846579#*#* , what I did wrong before is I extracted the update into dload which resulted in a subfolder called update. I moved the contents of "update" to directly under dload and the update worked. I got new kernel and new security patch, but it still displays B360. Strange. Seems to work well though.
Edit. I used the "full" package from 170321 in FF.
xeizo said:
Yes, tried dload/recovery method too, didn't work just says "update package doesn't exist" ...
---------- Post added at 07:55 AM ---------- Previous post was at 07:24 AM ----------
I managed to install it via servicemenu, *#*#2846579#*#* , what I did wrong before is I extracted the update into dload which resulted in a subfolder called update. I moved the contents of "update" to directly under dload and the update worked. I got new kernel and new security patch, but it still displays B360. Strange. Seems to work well though.
Edit. I used the "full" package from 170321 in FF.
Click to expand...
Click to collapse
Download also the hw specsea package so that you would go to b370
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
---------- Post added at 10:39 AM ---------- Previous post was at 10:14 AM ----------
xeizo said:
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
Click to expand...
Click to collapse
I answer myself, I overwrote the update-content in the dload folder with the update_data_... content and installed again. Now it's B370. Looks like it's a two stage process, rather clumsy, any way to install everything in just one large swoop?
xeizo said:
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
---------- Post added at 10:39 AM ---------- Previous post was at 10:14 AM ----------
I answer myself, I overwrote the update-content in the dload folder with the update_data_... content and installed again. Now it's B370. Looks like it's a two stage process, rather clumsy, any way to install everything in just one large swoop?
Click to expand...
Click to collapse
Yes its two step process because the cust is in the second update package..
xeizo said:
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
---------- Post added at 10:39 AM ---------- Previous post was at 10:14 AM ----------
I answer myself, I overwrote the update-content in the dload folder with the update_data_... content and installed again. Now it's B370. Looks like it's a two stage process, rather clumsy, any way to install everything in just one large swoop?
Click to expand...
Click to collapse
I tried to install the update.app file extracted from update_full_hw_eu.zip in my external sdcard with the dload folder method, but when I reboot the phone, I get an error that stops the upgrade process immediately, at 5%....
Someone could post a direct link to the right update_full_hw_eu.zip file ?
Thanks for the attention
use b370 21.03 firmware and also his update_full_hw_eu.zip file (NOT 13.04 version)
(usa la versione del 21.03 e il suo update_full
Prima installi l'update 21.03 poi dopo il file update, sempre via dload)
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
How to get avtivation code 4 huawei media pad gr8
Ameer latif said:
How to get avtivation code 4 huawei media pad gr8
Click to expand...
Click to collapse
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Click to expand...
Click to collapse
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
methods can check out my blog:
HUAWEI S7-701U Gr8 ACTIVATION CODE BYPASS OR FIRMWARE 100%
METHOD 1: To perform hard reset for your Huawei S7-701u you may need to save all of your apps and files to your memory card and take it out...
dreamyskyblue.blogspot.com
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
B
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
Bt how I install app remover were as the phone is unaccesable,
billson.chew.my said:
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
Click to expand...
Click to collapse
How can I by pass, i have the code the problem is the WiFi, Wereas it is connected,
FRP Bypass Samsung Galaxy S10 - 100% WORKING!
This method works!! No simcard is need to be inserted, no puk code is need to be used or other crap I have seen on alot of places, this is simple and a very easy way to frp bypass your samsung galaxy 10 without paying money for "pro" tools, this method is so easy so even your grandmother would succeed.
Totally there is three ways that I have found that allows anyone to bypass FRP very easy on the latest firmware (2020-03-14)!
One method is via NFC, the second option is via OTG cable between one android device on android v9.0 and your samsung s10 that is on android v10.0 and the third option is the most easy one so i decided to describe it for you all out there.
0. Turn off the device and remove simcard.
1. Enter recovery mode by keep device off and then press volume up + bixby + power button
2. Wipe cache and do a factory reset and then choose to reboot your device
3. Phone will now start as normal, change language to your prefered language
4. Take a screenshot at welcome screen with power + vol down, you will see "Allow samsung capture to access photos, media and files of your device" - Choose 'Deny' here.
5. Take another screenshot at welcome screen, an extra option that is 'Deny & dont ask again' - Choose this one this time
6. Now, take a third screenshot at welcome screen and you will get a totally different option, You will get a Allow Permission window popup instead now, choose 'Site Settings' here.
7. You will now get into Samsung Capture option, choose to allow permissions for storage if you want to be able to take screenshot, however the important part is to go to Permission option.
8. Now you should see 'Storage, Camera and Microphone, choose Storage' option here and then press on See all apps with this permission
9. Now press on the three dots in upper right corner and choose "Show System" option
10. There is many options you can choose here, let us browse down to "Google Chrome/Chrome" browser - Edit option from Deny to Allow and then press on see all Chrome permissions if you want to start chrome for example.
11. But even more interesting is that you will see settings icon at top, press on 'See all Settings permissions' - In next window just double click the settings icon at top for get to next window and now in down left corner - Choose 'Open' and you're in settings!
12. Scroll to bottom and press on 'about phone' and u will see "Reset" button, press on it to reset settings only and keep your data. (optional)
13. Now you just need download google account manager and add a new account and the old one will be overwritten (use web login in google account manager by pressing in upper right corner when you started account manager). If you want to join System UI just choose system ui in quickshortcutmaker.
quickshortcutmakercan be downloaded from: quickshortcutmaker
Pictures for those who prefer that can be found on my repo, click can be found on my github, click here for visit the repo.
Enjoy your fully unlocked Samsung Galaxy 10 device.
// wuseman
14 april 2020
I believe they fixed it. Is there any other method like going previous version and trying it again?
What's the furthest security patch
Up to what security patch does this support?
Does not work on A
download is offline....
speckdeckel said:
download is offline....
Click to expand...
Click to collapse
Fixed the url.
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
yeah "Add unlock FRP all version, all model (paid service)" really ?!?!?
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
very doubtful about this, is it possible to check the source code?
I don't see how it would work in practice, especially when it is not possible to use mtp commands (at the time of writing it is not possible afaik, not last week when I tried on s23) on the recent android phones
It might work on older models but hardly on today's, tell me more technical details how that tool work please?
Hi,
I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary.
This will activate dual sim mode on the phone with a single IMEI, I left my location set to Europe so it is upto you if you follow the last step to remove Dual Sim Mode.
You will need to backup anything you don't wish to lose as a full factory reset is required.
I did some digging and this will work with the same rom on A52, A72 and A92.
Could I get a moderator to cross post this to the other device forums please?
Requirements:
OPPO A72/A52/A92 - My bootloader is locked, My simlock is off
CPH2067_11_A.54 Latest European ROM for the device - Download Here: https://support.oppo.com/nl/software-update/software-download/?m=A72
Oppo Free Unlock Tool - https://forum.xda-developers.com/t/...de-to-coloros-11-and-enable-dual-sim.4191787/
A Google account to download ExpressVPN (This is the second last step so leave for now)
A Windows PC with a internet connection
WIFI or Mobile data on phone.
Latest ADB Drivers - https://adb.clockworkmod.com/
Instructions:
1) Backup all settings and user data.
2) Remove all accounts and screen lock security settings on phone.
3) Format all data, factory reset phone.
4) Download Oppo Free Unlock Tool from the link provided to PC.
5) Follow these instructions to install Microsoft Loopback Adaptor -
6) Open Device Manager and expand the Network Adapters category.
7) Find your Loopback Adaptor and double click it to open its properties.
8) Go to the Advanced tab and find the Network Address option in the Property pane.
9) Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
10) Install ADB Drivers.
11) Extract OPPO Free Unlock Tool, You're antivirus may give a false positive so you will have to manually add an exception for the tool.
12) Go to where you extracted the unlock tools. Open Sec5.exe.
13) Plug in phone via USB and select "Transfer Files".
14) Enable developer options on phone and activate USB Debugging.
15) Press Allow when prompted to give PC ADB access.
16) Open Sec5 window.
17) After about a second, a string of numbers and letters should show up in the left pane, Press Start Unlocking and few seconds later, "OK" should start flashing in the right pane.
18) Press stop unlocking and disconnect phone.
19) Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. (Take note of the one highlighted in green as you will need this in the final step).
20) Choose this one: "Europe EUEX" and click Ok you're phone will restart.
21) Download the rom from provided link to the phone and install through recovery mode.
22) Add your google account and download ExpressVPN from Play Store.
23) Open ExpressVPN and start 7 day trial then set to Netherlands server.
24) Goto Settings then Software Update and you will see Android 11 available to download.
25) Click Download then when complete Click Install
26) Remove Google Account from phone and factory data reset again.
27) Use instructions 12-20 to set your phones location back to your original setting.
That's All Folks
@MuntedJester THREAD CLOSED as duplicate of
Android 11/ColorOS 11 OPPO A72 Update with VPN
Hi, I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary. This will activate dual sim mode on the...
forum.xda-developers.com
The thread has also been moved from the development section into this sub-forum.
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Also review the sticked "Device Forum Rules (Read before posting)" with special focus on the conditions what threads qualify for the development section.