Pekaka_Exynos8895_s8(+)Kernel
STABLE with stock value，GPU max=546,MMGS CPU max=2314000,powersave performance balance
HIGH PERFORMANCE，overclock with GPU&MMGS CPU max value,more performace,less powersave
POWERSAVE，downclock with GPU,MMGS CPU max value,more powersave,less performance
you can set by synapse according to your requiements.
Important Notes
your phone should meet requirements as follows:
phones：SM-G95XX(dreamlte,exynos8895)S8&S8plus
firmware：FXXU1AQK7 or up
Recovery：twrp-3.2.1-0-dream(2)lte
CHANGLOG
Dec. 25,2017
-version：Pekaka_Exynos8895_s8(+)_v7.0.0
-need F.W. BL-AQK7 or up
- updated to newest samsung opensources of FXXU1AQK7
Nov. 1,2017
-version：Pekaka_Exynos8895_s8(+)_v6.0.0
-need F.W. BL-AQJ1 or up
- updated to newest samsung opensources of FXXU1AQJ1
July 30,2017
-version：Pekaka_Exynos8895_s8(+)_v5.0.0
-need F.W. BL-AQG5 or up
- updated to newest samsung opensources of FXXU1AQG5
-thanks @jesec,for security files to boot
-thanks @chrisedelmann83,for provided twrp link,let me to test
July 24,2017
-version：Pekaka_Exynos8895_s8(+)_v4.0.4
-fixed cpufreq_max(min)_limit of power for big cores while scaling_max(min)_freq changed
-fixed unused current control of charge types
-corrected current setting value of overclock freqs
-
July 19,2017
two versions,I prefer to v4.0.3
-version：Pekaka_Exynos8895_s8(+)_v4.0.3
-back to linux-4.4.13(AQF7 stock origin)-recommend
-back to backport-f2fs stock origin(stable)
-fixed some values of battery controller
-deleted cortex(not working at all)
-version：Pekaka_Exynos8895_s8(+)_v4.0.2
-back to linux-4.4.69(stable)
-back to backport-f2fs stock origin(stable)
-fixed some values of battery controller
-deleted cortex(not working at all)
July 14,2017
-version：Pekaka_Exynos8895_s8(+)_v4.0.1
-merge linux-4.4.76 lastest update
-merge backport-f2fs-v4.7,but no time to test f2fs working or not
-add battery controller on synapse
-fixed backup errors of efs and kernel on synapse
-fixed battery controller errors and force reboot bug on v4.0.0
-add more charger types,but QC2.0,QC3.0 maynot support.
July 2,2017
-version：Pekaka_Exynos8895_s8(+)_v3.4.0
-all cpu big and little cores max&min limit
-added lots of I/O schedulers(row,fifo,fiops,maple,sio,sioplus,tripndroid,vr,zen),thanks all makers,see details
-delete BUS and USB on synapse,no effect for the time being
-
June 29,2017
-version：Pekaka_Exynos8895_s8(+)_v3.3.0
-updated to newest samsung opensources of FXXU1AQF7
-added lots of wakelocks(ssp,sensorhub,bt_lpm,battery polling,sysovlo charging,NFC,wakeup sources) control
-added led high|low|power current control
June 26,2017
-version：Pekaka_Exynos8895_s8(+)_v3.2.0
-add current for 2.4-2.65G MNGS big cores to run much stablely
-fixed GPU disappear error
June 22,2017
-version：Pekaka_Exynos8895_s8(+)_v3.1.0
-new method for GPU overclock(still 572max)
-add GPU voltage control
-add on/off GPU Thermal Manager
June 18,2017
-version：Pekaka_Exynos8895_s8(+)_v3.0.0
-update ramdisk to AQF7
-add UKSM mod(default is enable,disable by UKSM of synapse)
-add CPU MNGS big core freq 2652000(default max,adjust by MNGS of synapse)
-add cortex item on synapse
-more tweaks
June 16,2017
-version：Pekaka_Exynos8895_s8(+)_v2.3.3
-update s8plus for heartrate bug,the same for s8 with v2.3.2
-s8 plus,confirmed working.
June 15,2017
-version：Pekaka_Exynos8895_s8(+)_v2.3.2
-add gpu min clock set by synapse
-add gpu all ***** for max and min both set by synapse,so you can fix gpu at one clock
-add 2158000,2002000,1973000 freq for MNGS big cores to set by synapse,so you can low down to 1973000 to save power,but gpu should limit to 455~385
-used ramdisk of QEB for s8plus,may solved healthy test heart rate correctly
June 14,2017
-version：Pekaka_Exynos8895_s8(+)_v2.3.1(former versions posted in China)
KERNEL features
-Base on SM-G950F_NN_Opensource-AQJ1 from samsung opensources
-Linux 4.4.13
-SELinux Permissive
-synapse support
-Max clock of GPU set to 572MHz,and adjustable by synapse(572|546|455MHz)
-Max frequency of MNGS big cores set to 2652000Hz,and adjustable by synapse(2652000|2574000|2496000|2134000Hz)
-Init.d support
-I/O schedulers
-battery controller
-more adjustments on synapse
-Other tweaks
-Twrp install
If you feel good and like my hard work,please consider a donate
DONATE HERE
KERNEL DOWNLOAD
Dec-25-2017
v7.0.0-baidu-download
v7.0.0-Mega-download
MD5: BED1382D192F0D6E6BC7D54580A9389C
SHA1: E5A2E6E9781FA37BE61FC265BAE3D2C6C7AF3591
CRC32: 8D31461C
-need F.W BL-AQK7or up
-nedd twrp 3.2.1 or newer
==OLD VERSION-AQF7==
Nov-1-2017
v6.0.0-baidu-download
v6.0.0-Mega-download
MD5: E7CCF3E7C198893906F0F874C597D235
SHA1: 60E4852C03ECD636C8F5549611FEECA81D2FADBE
CRC32: 204DC9AF
-need F.W BL-AQJ1 or up
-nedd twrp 3.1.1.2 or newer
July-30-2017
v5.0.0-baidu-download
v5.0.0-Mega-download
MD5: 631D04D23A0C25C8B4377096C8DCF684
SHA1: 9C5327BDC0D54D0142C6C768B411D41F1E9481B8
CRC32: 56267ACB
-need F.W BL-AQG5 or up
-nedd twrp work on AQG5
July-24-2017
v4.0.4-baidu-download
v4.0.4-Mega-download
MD5: 661C1F43E512C178BDAC8F24367BC44E
SHA1: 77CB9940E8B9A1E70667A2D84569A5D55BEE2547
CRC32: AEAA3E4F
July-19-2017
v4.0.3-baidu-download
v4.0.3-Mega-download
MD5: 1EC5876639B15B8CFC0D055888FF6491
SHA1: 16A98A0776FF69CD9B993303665DF759A4864FC2
CRC32: 93E60708
v4.0.2-baidu-download
v4.0.2-Mega-download
July-14-2017
v4.0.1-baidu-download
v4.0.1-onedrive-download
v4.0.1-Mega-download
July-2-2017
v3.4.0-baidu-download
v3.4.0-onedrive-download
v3.4.0-Mega-download
MD5: 4F12C23E68A082F455C4BD07AA1A8685
SHA1: B2FD026E20968F0DF2E1235CFB111C51A1EC10B9
CRC32: BDEBAC29
June-29-2017
v3.3.0-baidu-download
v3.3.0-onedrive-download
MD5: 203DA86C751F69F855642AAC00C175CF
SHA1: A86304F0FF4B6E6FA522624DCFBBC3027F7B609A
CRC32: 6AF2EB91
June-26-2017
v3.2.0-baidu-download
v3.2.0-onedrive-download
MD5: 3811953EF0B261772313784BFF6D3559
SHA1: 0889D3482C53F2B3C28F86463A3D0A466DD819DE
CRC32: 0233EFDB
June-22-2017
v3.1.0-baidu-download
v3.1.0-onedrive-download
MD5: 0DA8F7F78125326307EAD573791C61C7
SHA1: 4D5A340C0236DE29643D7338EA2000D769B2860C
CRC32: C6315414
June-18-2017
v3.0.0-baidu-download
v3.0.0-onedrive-download
MD5: 7A397ACB3ADBECE26570F121146AA5E9
SHA1: 056BC2494253AB572F987406BC78B25ED9C92BDE
CRC32: 2C186C69
***add CPU MNGS big core freq 2652000(default max,testing,if get unstable,pls adjust by MNGS of synapse)
June-16-2017-for s8 plus,s8 not need update if you are on v2.3.2
v2.3.3-baidu-download
v2.3.3-onedrive-download
June-15-2017
v2.3.2-baidu-download
v2.3.2-onedrive-download
MD5: 6BB1C35FD62A0F434FF0293EE7184A7F
SHA1: B98B038060247D08498CEE1A0B81615A7C3F6AE1
CRC32: 2865D93C
June-14-2017
v2.3.1-baidu-download password: r2j3
v2.3.1-onedrive-download
kernel source git
CREDITS:
Thanks to
@jesec,thanks for some codes for kernel source,especial for over clock
@Tkkg1994,thanks for binary of kernel zip mod
@lyapota,thanks for some tweaks for kernel codes
@SkyHigh,thanks for synapse origin mod
@UpInTheAir
@osm0sis,thanks for build mod
@teamwin,thanks for TWRP
@supersu.thanks for SuperSU
Thanks for encouragement:victory:
@lasset
@Okarina26
@royalbloodvi
...
if forgot,pls let me know
HOW TO FLASH
1.before flashing this kernel,your phone firmware should have install lastest twrp s8 twrps8plus twrp sucessfully on your phone
2.BL of your phone need to update to the lastest BL (kernel v3.0 or up need match BL AQF7)
3.download kernel copy to your phone's sdcard
4.flash kernel zip you download
5.flash supersu and clear cache reboot phone
6.install synapse APK
7.if you don't have busybox on phone,pls install busybox due to synapse need it to run.
*If you had changed values on synapse,especially for I/O or current of GPU, pls reboot phone after save on synapse,the run synapse again press X to load your settings before reboot.
**If you got auto reboot problem,just delete synapse and antutu and reboot your phone normally then re install these apks.
newest kernel source git
congratulation
Sent from my SM-G955F using Tapatalk
THX Works perfect!! Bugatti Veyron S8+ Safetynet Passed.
this is going to be great for people who want slower cpu/gpu for better battery. I am one of them
i haven't tried this, but if i use power saving while having my cpu/gpu underclocked. Will power saving change anything to the clock ?
@pekaka
Welcome and thank you.
Safetynet missmatch. Red! Magisk. Tks 4 this one.
Sent from my SM-G955F using XDA-Developers Legacy app
Can you make it able to set gpu frequencies to lock at Max?
royalbloodvi said:
Can you make it able to set gpu frequencies to lock at Max?
Click to expand...
Click to collapse
if add adjustable of gpu min clock,will be,but may unstable,will try if I have time.
Can you inverted that we can uv cpu and GPU?
Kevinkuensken said:
Can you inverted that we can uv cpu and GPU?
Click to expand...
Click to collapse
have tried,but failed,more complicated,less knowledge,sorry.
Welcome here.
Thanks for the great kernel.
pekaka said:
if add adjustable of gpu min clock,will be,but may unstable,will try if I have time.
Click to expand...
Click to collapse
Yes please Do, this kernel will be perfect for gamers likr me.
Great kernel by the way! I've tried all and this is best, so if you can set min gpu it's gonna be 100 percent perfect!
awesome kernel...thanks...[emoji106] [emoji1]
Sent from my SM-G955F using XDA-Developers Legacy app
vhsantos1 said:
Safetynet missmatch. Red! Magisk. Tks 4 this one.
Sent from my SM-G955F using XDA-Developers Legacy app
Click to expand...
Click to collapse
+1
the same here
FanBoy Samsung said:
+1
the same here
Click to expand...
Click to collapse
Not kernel problem. Google updated the safetynet.
Read magisk forum advisory.
royalbloodvi said:
Can you make it able to set gpu frequencies to lock at Max?
Click to expand...
Click to collapse
yes,make it,still stable,next version.
Okarina26 said:
awesome kernel...thanks...[emoji106] [emoji1] View attachment 4181694View attachment 4181695
Sent from my SM-G955F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Looks good. Any Synapse profile to share? Thanks!
Also add tje option of min cpu and gpu thst eojkd make this kernel perfect
@pekaka init.d working? Thank you. Been waiting for Synapse kernel for a long time
Sent from my SM-G955F using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** Disclamer***
Code:
Your warranty is now void.
We are not responsible for any damage or problems you may have!
YOU are choosing to make these modifications.
Introduction
First of all I want to say this that is one project which just started and gradually we will improve it. In this community there are very good developers and we are not traying to compete with them. This is just a hobby and we do it because we like Android. This kernel is only for N7100 and we don't have plans to make it compatible with other versions of Galaxy Note II. We hope that you will not only download the kernel but also you will sent your comment with pros and cons and you should respect our efforts.
Don't be scared by the nightly denomination of the kernel, I'm just taking the traditional naming scheme where nightly designates feature development
Click to expand...
Click to collapse
Features:
Code:
[COLOR=DimGray]Based on Samsung Source code N7100XXUFND3
Compiled with GCC 4.7
Linux version 3.0.101
Overclock to 2000MHz
Dynamic FSyn control
Wolfson Sound
GPU OC/uV
Advanced TCP control
Multicore Power Saving
Charging Control
CPU Voltage control
LED Control
ABB Control
MDNIE mode Hijack
Android Logger mode
zzmoove governor
Lulzactiveq governor
Touchwake
Touchboost
slide2wake
Frandom - random number generator
F2FS support
Synapse support[/COLOR]
Installation instructions
You need TRWP 2.6.3.2(recommended)+ or Philz(6.25) Recovery
Download Zip push to Ext or Int Sd Card
Install zip and Restart
Click to expand...
Click to collapse
Downloads
Note: Nadians Losing Root after flashing the Kernel, Re-flash the Kernel to gain Root Access.
Current Versions:
Nadia nightly r7 Mediafire
Nadia nightly r7 MEGA
MALI BLOBS for NG3-NG4: MALI LIBShttp://www.mediafire.com/download/d6y3zgy6wdjvv8g/Mali_blobs_for_NG3-NG4.zip
Note: If you coming from r5+ delete data of synapse before flash the kernel!
Synapse Kernel Control App
Previous Versions:
Nadia r6.1.1 Mediafire
Nadia V6.1 Mediafire
Nadia nightly r6 MediaFire
Nadia nightly r6 MEGA
r5.1 Media Fire
r5 Mediafire
r5 Mega (Mirror)
Nadia nightly r4
Nadia nightly r4 MEGA mirror
Nadia nightly r3
Nadia nightly r2
Nadia nightly r1
Click to expand...
Click to collapse
September- 20 -2014 nightly r7
- Zzmoove updated to V0.9 beta4
- Corrected L1 cache shift
- Increased force_max_zoneorder to 12
- Disabled multicast when is sleeping
- cleaned some files
- sched_fair: reduced latency
- sched_fair: optimized cgroup_pick_next_task_fair()
- sched_fair: implemented smarter wake-affine logic
- cpuidle: removed cross-cpu IPI by new latency request.
- Added extra free kbutes tunable
- Added Xbox controller support as module
- Added NTFS support as module
- Added support to ppp-widget
- Enabled max freq for busfreq opp
- Added early suspend delay to userspace
- Updated mali driver to r3p2 rel4
- Added key disabler for cypress-touchkey
- Enabled negative mode compatibility of newer MDNIE drivers (Synapse)
- Added new page in Synapse for Live Statistics (Time in states, Uptime,etc.)
- /sbin nadia.sh values moved to init.d
Synapse and all available options:
- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: current frequency, CPU and Battery temperatures, current CPU cores online, CPU MAX and MIN frequency, CPU Governor, Governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling freqyency and treshold steps.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead and Dynamic FSYNC.
- CPU DRIVERS: cpu multicore power saving, cpu idle mode, logger mode, touchboost settings.
- ABB settings
- Kernel tweaks: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BATTERY: charge control
- SOUND: Wolfson Sound control
- MDNIE: mdnie mode and scenario
- LED: Blinking effect, led intensity and spee led.
- Touchwake: touchwake config
- INFO-reboot: info about kernel,etc.
Click to expand...
Click to collapse
Previous Version Change log:
August- 1 -2014 nightly r6.1.1
- fixed HDMI Audio issue
July- 31 -2014 nightly r6.1
- sysfs interface to Enable / Disable CRC
July- 25 -2014 nightly r6
- Linux version upstream to 3.0.101
- More stability, better battery life and performance
- Mdnie mode hijack (Yank555.lu) as default has standart samsung values.
- mmc: disabled CRC (improved performance)
- Zzmoove Version 0.9 beta3
- dync_sync_cntrl: updated to 1.2
- fixed the workqueue overload battery waste
- Test Autogroup patch for agrouping into UserID and not TaskID.
- fixed touchboost facing issue in synapse
- fixed logger mode facing issue in synapse
- Pegasusq tweaked
- Set good sound for Wolfson sound
- Fixed GPU Treshold issue
- Touchboost frequency set to 700MHz as default
- Deleted some scripts from init.d
- Made some changes in the ramfs
- Other minor changes
July- 09 -2014 nightly r5.1
Fixed touchboost frequency in synapse.
Fixed zzmoove permissions
Fixed uV Issue faced by few users.
July- 04 -2014 nightly r5
Based on new Samsung source code XXUFND3
Kernel compiled with Toolchain GCC 4.7
Retain only online cpus in manage_policy->cpus
irq: Set CPU affinity as soon as the irq thread is created
lowmemorykiller: Changed default debug_level to 1
Network speed tweaked
Dynamic Fsync updated to v1.1
Notification LED controls
Zzmoove updated to v0.9 beta2
earysuspend: speedup late resume (faster wakeup of the device)
sched_fair: Reduced latencies
CPU OC to 2000MHz and moved sysfs uV to cpufreq.c
Wolfson Sound Control
Synapse support
June- 13 -2014 nightly r4
F2FS support
GPU frequency and sys interface fixed
power: neutered the cpufreq min samsung interface
power: reduce regulator initializations to regulator minima
sched/nohz: Rewrite, fix and add more accurate load-avg computation
Introduce timer slack controller
Zzmove updated to v0.8
Lulzactiveq updated and added sys screen_off_max_step
sched: Ensure cpu_power periodic update
cpupower: update the cpu_power according to cpu load
ARM: 7011/1: Add ARM cpu topology definition
block/blk-core: add support for Linux 3.0.x for urgent request handling
block: Add support for reinsert a dispatched req
Multicore Power Saving 0 by default
For more info check my github
June 2 nightly r3
GPU OC/uV (Thanks to DerTeufel and Yank555.lu)
Added scripts in init.d for the GPU OC and uV
Proportional Rate Reduction for TCP
Buqfreq: Use cpu_load_slope correctly (Thanks to AndreiLux)
Added zzmoove governor
Added frandom - random number generator
Allocate boot (MMC) partitions on probe
Increase timeout limits for bad sdcard
Add sysfs interface to Enable / Disable Android Logger (Thanks to AndiP)
Asynchronous I/O latency to a solid-state disk greatly increased between the 2.6.32 and 3.0 kernels
Forced Fast Charge (Thanks to Yank555.lu)
Reduced wakelock
Added cpu-boost driver
Implemented Touchwake v1.1a and Touch boost
Added slide2wake (Thanks to DerTeufel)
Cpufreq & hotplug updates
tmpfs: fix mempolicy object leaks
LOAD_FREQ (4*HZ+61) avoids loadavg Moire
Optimized ARM RWSEM algorithm
reg: Fixed memory leak
Optimized square root algorithm
Added ARM optimized crypto algorithms
mm:backing-dev tweak
Deadline iosched updated and tuning
writeback: fix occasional slow sync
Drecreased time to enter sleep
Softirq: reduced latencies
Click to expand...
Click to collapse
May 24 nightly r2 :
lib/memcopy and lib/string use glib version
Added charger control
Added Boeffla Sound Engine 1.6.5
Added Lulzactiveq governor
Added Sysfs_helpers: Allow negative values
added Advanced TCP: westwood by default
Click to expand...
Click to collapse
May 22 nightly r1 :
Based on Samsung Source code SEA_KK_Opensource
Overclock to 1920MHz
Default scheduler = Cfq
Default governador = Pegasusq
Cpu = 1600/200
CPU voltage control
Dynamic FSyn control
Reduced battery-monitor wakelock timeouts
Added SIO, ZEN and ROW
Disabled debug kernel
Adaptive Body Bias control
Improved performance
Fixed cpu scaling above max frequency
Increase readahead value to 1024Kb
Click to expand...
Click to collapse
F.A.Q
Source code:
Code:
https://github.com/Pafcholini/Nadia-kernel-kk_N7100XXUFND3
Thanks To/Credits
@franlov (I want to give special thanks to him for helping me with everything.) @flar2 @franciscofranco @tamirda @Yank555.lu @DerTeufel @wanam @AndreiLux @gokhanmoral @andiP @psndna88 @mat9v @KNIGHT97 @klurosu @mohit14785 @ph03n!x @chobztopz
@ and all users that support the thread and the kernel
You can follow new updates HERE
Hit the "thanks" button if you like my work.
If you think our work it's worth, Invite us for a beer or coffee
XDA:DevDB Information
Nadia nightly Kernel, Kernel for the Samsung Galaxy Note II
Contributors
Pafcholini, Pafcholini, aukhan
Source Code: https://github.com/Pafcholini/Nadia-kernel-kk_N7100XXUFND3
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: Nadia nightly r7
Stable Release Date: 2014-09-20
Created 2014-05-22
Last Updated 2015-03-02
Recommended settings & FAQ
Balance between performance and battery
I'm using Synapse (highly recommended)
Read ahead buffer: 1024
IO scheduler: row or zen
Frequency Lock: ON
CPU min freq: 200MHz
CPU max freq: 1600MHz for battery / 1800-1920MHz for performance
CPU governor: Lulzactiveq for both
CPU voltage: -50uV or -100uV (Be careful!! If you low voltages much you can get boot loop or battery drain.)
CPU idle Mode: AFTR+LPA
TCP: westwood for both
Dynamic FSYNC: ON
F.A.Q
Note/Tip: Nadians if there is nything that is missing please PM me I'll add it and in future if you feel anything needs to be added please tag me in that post I shall update it.
1.Which app can control this kernel?
Click to expand...
Click to collapse
Use Synapse Trickster Mod, Devil Tools or Devil Kernel Manager
2. After flashing the kernel lost root what to do?
Click to expand...
Click to collapse
In case you loose root just flash Super SU
3. Any recommended settings to follow using Synapse?
Click to expand...
Click to collapse
at the beginning of the second post.
4. Method to save your configuration Synapse/TricksterMod?
Click to expand...
Click to collapse
thanks to @klurosu
5.How to overclock gpu?
Click to expand...
Click to collapse
You can use Synapse, trickster mod, devil tools or Devil Kernel Manager
6.My apps on sd card look like this and give me force close? My apps on external sd card have that android icon and force close any help please?
Click to expand...
Click to collapse
Go to play store and Reinstall affected app again and do a reboot, done. Don't mess/uninstall anything.
OR
If you have titanium backup just restore specific affected app from it.and reboot your device
Thanks to @optimusPRIME
7.When i listen to music, and turn off the display, the phone uses only 1core of the CPU, and so the music is hanging for a 10th of a second or so in every 10-15 seconds. Probably because the load is too high for 1 CPU. Is this also happening to you guys ? Is there a good way to avoid this? I use the pegasusq governor. maybe i need to use a different one ?
Click to expand...
Click to collapse
Yes, sometimes pegasusq can cause this.
Switch your governor to either lukzactiveq or Zzmove to have good battery and no skipping music along with smooth performance.
I'll give the reason as to why this happens - Pegasusq is a governor designed to handle multicore systems only and it does an efficient job at the smoothness and battery life with those. But the problem is that it isn't designed to optimize and ramp up the single core systems properly so it tries to push the remaining core into deep sleep, which causes occasional stutter in many background tasks like music. Now for that you'll need a governor which can handle multicore and single core systems at the same time and efficiently, while many governors can do the job, but none is as smooth and optimized as pegasusq in a multicore system. Ondemand is suggested by many for the skipping music problem, but the problem with ondemand is that it was made for single to dual core systems only and this leads to lag and slower ramping of frequencies in a multicore system, but provides a battery life comparable to pegasusq.
While all of this might cause confusion for which governor to choose, lukzactiveq is optimized for more battery but smoothness at same time, and ramps up sliwer but preserves battery life when screen is on; while Zzmove ramps quickly and gives a more snappy experience, the battery life a a bit less.
So choose what you want and enjoy @KNIGHT97 thanks for the detailed explanation.
8. What is touch wake? or My Touch wake is not working?
Click to expand...
Click to collapse
It's a feature which will allow you to wake your device when it gets locked after screen timeout.
Try this unlock your device wait for it to auto lock not just tap on display and your device will wakeup no need to push the unlock key.
9. Video Camera stops recording?
Click to expand...
Click to collapse
Fix is: flash your desire rom...take a pic with your camera and a video...then reboot in recovery mode and install nadia kernel.
Thanks to @klurosu
10. How can I change cpu voltage with trickster mod???
Click to expand...
Click to collapse
Open trickster mod go to 4th screen. There you will find section mpu voltages. There you can change it. @mohit141785
11. By default the restriction settings in power saving mode are On even If the mode is Off.Remove CPU restriction and you will get normal work of the rom and better score.
Click to expand...
Click to collapse
Also try with different governors and I/O schedulers. Increase the SD cache to 1024 or 2048 (more than that has no effect and is wasted) and then try, it can sometimes give higher score in the storage I/O, which increases the total score too @KNIGHT97 thanks for the detailed explanation.
12. From where can I remove int.d script?
Click to expand...
Click to collapse
Go to /system/etc/init.d using any root based file manager and delete.
Note: There is an important one related to superSU and if you remove it by mistake you're gonna have trouble with root permissions. @KNIGHT97
13. My device doesn't show any reaction to undervolting (battery life is same as before) or gets unstable even on light undervolting?
Click to expand...
Click to collapse
Use Wanam Xposed and turn off DVFS or user DVFS Module(standalone) (dynamic voltage and frequency scaling), this feature was kept in touchwiz for benchmark boosting purposes and will confkict with any undervolting and custom governors because it scales the voltages and frequency on regular intervals and is framework integrated, so gets a higher priority than kernel based voltage and scaling controls.
For people who don't know what is DVFS please refer Wikipedia.
check @mattiadj thread for more details. @wanam @mattiadj @KNIGHT97
14. Can I use some performance scripts?
Click to expand...
Click to collapse
Yes, you can check @mat9v thread
15. Why is set on boot doesn't stick even though I have set it?
Click to expand...
Click to collapse
First make sure you have set on boot and set on boot notification enabled. If after a reboot you see this notification
Then set on boot was run.
16. Settings don't stick?
Click to expand...
Click to collapse
You might have scripts, other apps, or ROM settings override Synapse settings. In this case Set on boot delay might help if it's for settings at boot otherwise you need to track down and disable the app/ROM settings
17. If settings do not stick then the 2 most likely problems are
Click to expand...
Click to collapse
A1: If you're using chainsdd's superuser switch to koush's superuser or SuperSU.
A2: Make sure you are not using another tweaking app or your ROM has setting that overrides our boot configuration. In that case, “Set-On-Boot delay” feature might help.
Otherwise or if you still have problem, see below
A3: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel service that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues. Unfortunately, it can't be fixed from app side.
A4: DON'T use a reboot app, they effectively force reboot your phone like a system crashes. If you really have to use it, then do it after the apply grace period or disable grace period by setting it to 0.
A5: You might have scripts, other apps, or ROM settings override Trickster MOD settings. In this case Set on boot delay might help.
A6: Don't force close the app (e.g. in Android Settings). It puts the app in a state that it can't start at boot until user starts the app normally again.
A7: Don't use app like Greenifier to greenify Trickster MOD. Doing so will prevent it to run at boot to apply Set-On-Boot.
A8: The Android BOOT_COMPLETED broadcast might be borked because of theme, mods, or after a few dirty flash. In this case reinstall ROM with a data wipe is needed. This solution is confirmed by our users and as this issue is because of deteriorating ROM with ORD, nothing we can do about it on our side.
A9: If it still doesn't work, please do in in app bug report using the option in the app menu right after Set on boot was run. You can enable Set on boot notification to know that.
Source: Trickster MOD FAQ.
18. Battery Saving Tip
Click to expand...
Click to collapse
Lux Auto Brightness
19. Detailed guide on Battery Calibration, Tips & Tricks to save battery.
Click to expand...
Click to collapse
Here
20. I made a logcat but my file is empty. How I can "fix" it?
Click to expand...
Click to collapse
By default Android logger is disable. Go to Synapse > CPU DRIVERS and enable Logger Mode.
nice☺
Sent from my GT-N7100 using Tapatalk
Thanks. Custom kernels are one of the few reasons I'm still using my Note2.
By the way is it possible to implement the mdnie controls from Perseus or devil kernel ?
darkchazz said:
Thanks. Custom kernels are one of the few reasons I'm still using my Note2.
By the way is it possible to implement the mdnie controls from Perseus or devil kernel ?
Click to expand...
Click to collapse
Yes in future release I'll implement new features.
Enviado desde mi GT-N7100 mediante Tapatalk
this is the first kernel for kitkat, tomorrow i will guive feedback. thanks for your release
after one day of use, really good
@Pafcholini can u add more cpu governor..btw nice kernel..smooth..?
Sent from my GT-N7100 using Tapatalk
Azhery said:
@Pafcholini can u add more cpu governor..btw nice kernel..smooth..?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Yes, I'll add lulzactiveq, etc . Just give me a few days to do it.
PS: if I have time tomorrow I'll add some features and I'll upload the r2.
Enviado desde mi HTC One mediante Tapatalk
how about battery drain?
guma55 said:
how about battery drain?
Click to expand...
Click to collapse
Is early to say it but it looks good.
Enviado desde mi HTC One mediante Tapatalk
error: no automatic screen lock. XXUND4 version of Vietnam
Gửi từ GT-N7100 của tôi bằng cách sử dụng Tapatalk
Nice kernel buddy. Hoping to see following features in next update.fast charge. Lullzactive. Gpu overclock.
Which app can control this kernel, mate?
Sent from my GT-N7100 using XDA Free mobile app
le vien said:
Which app can control this kernel, mate?
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
use trickstermod app..
Sent from my GT-N7100 using Tapatalk
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
brolee93 said:
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
Click to expand...
Click to collapse
u need flash supersu in recovery..i dont know..bcoz i dont have any receive call today..which rom are u using??
Sent from my GT-N7100 using Tapatalk
brolee93 said:
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
Click to expand...
Click to collapse
Worked fine for me, no loosed root, no black screen while incoming calls...etc... Good job mate.
Sent from my GT-N7100 using Tapatalk
brolee93 said:
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
Click to expand...
Click to collapse
What rom are you using ? Not is normal . Make cache and dalvik cache .
Enviado desde mi HTC One mediante Tapatalk
Will it support DN3
Sent from my GT-N7100 using Tapatalk
aukhan said:
Will it support DN3
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
yes..work well on dn3 v5..☺
Sent from my GT-N7100 using Tapatalk
DedS v2
Note:
I'm not responsible if your phone explodes due to overheating or you have to take your phone to the service centre,because it got bricked. You are willing to try this kernel:good:
Click to expand...
Click to collapse
DedS v2 is the second release of DedS kernels. This time it's more tweaked,fast and best-in-class performance
FEATURES:
*CPU Governorserformance,Powersave,Conservative,Interactive,Ondemand,Hybrid, adaptive,Intellidemand,Intelliactive
*CPU I/O Schedulers:Noop,Deadline,CFQ,Sio,FIOPS,BFQ
*GPU Governors:Simple Ondemand,Performance,Powersave,Userspace,Adreno TZ
*GPU Overcloked @533MHz
*F2FS filesystem support
*Asynchronous FileSync ported from HTC One(Thanks to @faux123)
*IntelliPlug Hotplug driver.
*Kernel compressed with LZ4.
*Powersuspend kernel driver (read FAQ)
*Dynamic management of dirty page writebacks
*Frandom.Read more about it here
*O3 Optimizations
*Many performance tweaks
*Kernel version 3.4.98
Click to expand...
Click to collapse
DOWNLOADS:
From v2.2 onwards there will be 2 versions, m-mainline and e-experimental
From v2.0,all downloads will be available here:
http://www.androidfilehost.com/?w=files&flid=16993
Click to expand...
Click to collapse
Sources:
https://github.com/Ateekujjawal/DedS_4.4_ms013g
If anyone wants to add this kernel in their rom, they are free to do so,but please post the sources and a link to this thread!!!
If anyone wants to revert back to stock kernel, flash this through ODIN.
Credits Section:
@leo811: For informing me of the kernel sources on time
@shabbypenguin: For his 4.4 dtb files
@h0rn3t: For performance control app
Changelogs on post #2
FAQ on post #3Enjoy the kernel everyone!!! I hope you like it
XDA:DevDB Information
DedS kernel v2, Kernel for the Samsung Galaxy Grand 2
Contributors
##W4TCH0UT##
Kernel Special Features: Here is the second release of DedS kernel
Version Information
Status: Stable
Current Stable Version: 2.2
Stable Release Date: 2014-07-27
Created 2014-07-24
Last Updated 2014-08-06
Reserved
CHANGELOGS:
|======================|
VERSION v2.3e:
*Added Intellidemand,Intelliactive governors
*Added IntelliPlug Hotplug driver
*Added F2FS filesystem support(Read FAQ)
*Asynchronous Fsync ported from HTC devices
*Kernel compressed with LZ4
*Linux 3.4.99
=============
VERSION v2.2m:
*Added sweep2wake and doubletap2wake(Read FAQ)
*GPU tweaks
*Add adaptive governor
*Add BFQ I/O Scheduler.
*Added UKSM(Read FAQ)
*Removed CPU OC(CPU UC is still included)
VERSION v2.2e:
*Added sweep2wake and doubletap2wake(Read FAQ)
*GPU tweaks
*Add adaptive governor
*Add BFQ I/O Scheduler
*Added UKSM(Read FAQ)
*Removed CPU OC(CPU UC is still included)
*Added powersuspend(Read FAQ)
*Dynamic management of dirty page writebacks
*Some performance tweaks
================
VERSION v2.1:
*Added CPU Overclocking upto 1.6Ghz and CPU Underclocking up till 96Mhz
*GPU Overclocked @533mhz
*Added Simple GPU Algorithm for better performance
*Added many performance tweaks
================
VERSION v2.0:
*Initial release
|======================|
Reserved
FAQ:
Q:What is the performance control app?
ANS:I have included this app to tweak the kernel settings efficiently. You can enable everything you want.
Q:What's the difference between m(mainline) and e(experimental) versions?
ANS:M builds are made for performance and battery and only include necessary features. E builds are meant for experimentality and they include M features+Many experimental features. E builds have many tweaks but it might drain your battery. E builds might not even boot, so flash at your own risk and take a backup before flashing.
Q:What is F2FS?
ANS:F2FS is a file system exploiting NAND flash memory-based storage devices, which is based on Log-structured File System (LFS). The design has been focused on addressing the fundamental issues in LFS, which are snowball effect of wandering tree and high cleaning overhead.
Q:What is UKSM?
ANS:UKSM is the highest version of KSM available for kernel 3.4, which deals with merged pages effectively. Kernel SamePage Merging (KSM)lets the hypervisor system share identical memory pages amongst different processes or virtualized guests.
Q:What is sweep2wake/doubletap2wake?How to enable/disable it?
ANS:Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the screen. This feature might not work at all times, so please don't complain.
To enable sweep2wake, go to sys/android_touch/sweep2wake from any root browser and enter whichever value you want(values given below):
Code:
0=disabled
1=enable sweep2wake (default)
2=enable sweep2wake with backlights
To enable doubletap2wake, go to sys/android_touch/doubletap2wake from any root browser and enter whichever value you want(values given below):
Code:
0=disabled
1=enable doubletap2wake (default)
Q:What is LZMA/XZ/LZ4...compression method?
ANS:It is basically the algorithm used for compressing the kernel. For now, I use LZMA.
Q:What is powersuspend?
ANS:It is a new kernel driver which replaces Earlysuspend and works without it.
Click to expand...
Click to collapse
Hope I cleared everything, Any questions left out, just ask them, Cheers!!!
does it have bln and swipe2wake support???
manan001 said:
does it have bln and swipe2wake support???
Click to expand...
Click to collapse
I'm quite busy with other kernels right now, so I'll add it by tomorrow or day after tomorrow, and adding those features is not so easy. And I already told you bln needs ROM support also.
Sent from my GT-I9082 using Tapatalk
Rom is already supported
##W4TCH0UT## said:
DedS v2
Note:
DedS v2 is the second release of DedS kernels. This time it's more tweaked,fast and best-in-class performance
FEATURES:
DOWNLOADS:
Sources:
https://github.com/Ateekujjawal/DedS_4.4_ms013g
Credits Section: @leo811: For informing me of the kernel sources on time.
@shabbypenguin: For his 4.4 dtb files
Changelogs on post #2
Enjoy the kernel everyone!!! I hope you like it
XDA:DevDB Information
DedS kernel v2, Kernel for the Samsung Galaxy Grand 2
Contributors
##W4TCH0UT##
Kernel Special Features: Here is the second release of DedS kernel
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2014-07-24
Created 2014-07-24
Last Updated 2014-07-24
Click to expand...
Click to collapse
Does it supprts otg cable?
vipulm15 said:
Does it supprts otg cable?
Click to expand...
Click to collapse
Nope and please don't quote whole op.
VERSION v2.1 released:
*Added CPU Overclocking upto 1.6Ghz and Underclocking up till 96Mhz
*GPU Overclocked @533mhz
*Added Simple GPU Algorithm for better GPU performance
*Many net speed and performance tweks
Now,i'm working on s2w/dt2w. Enjoy the new release.
Wifi is not working and also the max freq is set to 1.19Ghz only
++1
anadarco7 said:
Wifi is not working and also the max freq is set to 1.19Ghz only
Click to expand...
Click to collapse
anadarco7 said:
Wifi is not working and also the max freq is set to 1.19Ghz only
Click to expand...
Click to collapse
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Stock kernel, if anyone wants to revert, simply flash through ODIN.
Stock kernel
##W4TCH0UT## said:
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Click to expand...
Click to collapse
As discussed with khasim wifi was working in 2.0 perfectly..
I did not have wifi so couldn't test..
manan001 said:
As discussed with khasim wifi was working in 2.0 perfectly..
I did not have wifi so couldn't test..
Click to expand...
Click to collapse
I made one commit to improve WiFi speed, so I think that's affecting it. I'll revert it.
Sent from my GT-I9082 using Tapatalk
Frankly speaking these all does not affect speed as after all it all depends on once internet speed.. ?
wifi
##W4TCH0UT## said:
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Click to expand...
Click to collapse
1) In the previous release (2.0) it working perfectly.
Instead, with new release (2.1), I can't turn on the wifi.
##W4TCH0UT## said:
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Click to expand...
Click to collapse
Wifi working in 2.0 .Let me know how to get the logcat
Sent from my SM-G7102 using XDA Free mobile app
from playstore you can use logcat builder
https://play.google.com/store/apps/details?id=org.jtb.alogcat&hl=en
logcat for Wif issue
l0rdelric said:
1) In the previous release (2.0) it working perfectly.
Instead, with new release (2.1), I can't turn on the wifi.
Click to expand...
Click to collapse
From Logcat Extreme:
E WifiHW: ######### set firmware type 0 ######
return of insmod : ret = -1,Exec format error
WifiStateMachine: Failed to load driver
WifiStateMachine: sendErrorBroadcast code: 10
E WifiController: Wi-Fi driver is unstable. Received CMD_STATEMACHINE_RESET
tn2009_kernel v.2.1.1
THIS KERNEL ONLY FOR G900F!!!
Change log:
- Build from Samsung LL Update 2 new sources;
- Build with GCC Sabermod 5.1.x;
-Linux kernel 3.4.0;
- Selinux status set to Permissive;
- ExFAt sdcard support;
- init.d support;
- Insecure;
- Adb Insecure;
- Increased entropy levels (both read and write);
- Disable restrict ROOT;
- SELinux: Fix memory leak upon loading policy;
- SELinux: just shut up;
- Kernel FULLY permissive;
- Remove sign version on dirty builds;
- Support Force fast charge;
- Support NTFS;
- Add NEW thermal driver v2 (Intellitermal 2.0 is based on the latest Qualcomm thermal driver adapted for in-kernel use control. Newer MSM8974+ chipsets should use this driver going forward);
- lowmemorykiller: swap optimization;
- Low memory solution in lollipop;
- Makefile: don't use GCC wrapper;
- Make Art Optimize Everything;
- Google play services wakelock fix
- Make SELinux quiet;
- Network Speed Tweak;
- Set SELinux to permissive permanently;
- disable crc to improve performance;
- Double min-max Read Ahead;
- Fix memory leak in mass_storage_function_init();
- Removed "KERNEL IS NOT SEANDROID ENFORCE" (thanks to kykint);
- Fix the too small buffer for dname;
- Add Simple GPU Algorithm;
- Interactive - implement tunables lock function to prevent Samsung...;
- msm_adreno_tz - Make GPU use lowest idle frequency when no load;
- Add KCAL (MDSS color control) support for post processing control [v2];
- Clever oupravleniye frequencies of kernels;
- Add Boeffla charge control;
- Add 10 governors:
Impulse
Intellidemand
Itelliactive
WHEATLEY
SMARTMAX
INTELLIMM
SLIM
LIONHEART
NIGHTMARE
PEGASUSQ
-Add 3 I/O schedulers:
SIO
FIOPS
ZEN
-lowmemorykiller: implement task's adj rbtree;
- add frandom support;
- XXU1BOE6 Ramdisk;
- Add undervolting interface;
- Add sound control (load and insatall Faux Sound app from PlayMarket).
Change log v.2.1.1:
- Build with GCC Sabermod 5.1.x;
- Update ramdisk (G900FXXU1BOE6);
- the improved energy saving;
- Optimizations.
Downloads:
Mod edit link removed no sources
Click to expand...
Click to collapse
Configuration of the kernel:
To tweak and configure the kernel, manually load and install the app "Trickster mod and Kernel auditor" from Google Play.
Credits:
- Lord Boeffla
- tamirda
- kykint
- NowenUI
- zparallax
- faux123
- googy_anas
- and more..
Thanks super kernel
waiting rom
wainting for comments....
Works fine on xtrestolite after wiping dalvik and cache. Will you post further updates of this kernel?
Frandom enabled by default???
MewCore said:
Works fine on xtrestolite after wiping dalvik and cache. Will you post further updates of this kernel?
Click to expand...
Click to collapse
yes
It's a good work Thank you, continued to creativity
Testing!!! ??
no undervolt aviable?
core720 said:
no undervolt aviable?
Click to expand...
Click to collapse
+1
sensejstg said:
Frandom enabled by default???
Click to expand...
Click to collapse
yes
Please add undervolt option
I'm very happy with battery life and performance. Works great after flashing.
Bummer no sound mods are available for S5 kernels
Add NEW version Kernel!
Is battery life good can someone post pictures
Sent from my SM-G900T powered by Phoenix rom and ktoonsez kernel
Lollipop ?
I tested 1.8.7 and got better bench results then in 1.8.0, very nice
I'll try to get a full discharge and post some battery life pics.
MewCore said:
I tested 1.8.7 and got better bench results then in 1.8.0, very nice
I'll try to get a full discharge and post some battery life pics.
Click to expand...
Click to collapse
Thanks and ur settings. ..
Sent from my SM-G900T powered by Phoenix rom and ktoonsez kernel
Lollipop ?
Good job...
Tamerlan2009 said:
Add NEW version Kernel!
Click to expand...
Click to collapse
Your latest kernal is v2.0 and not 1.8.7?
Thank.
2.0
Hello all togerher, as I promised you, I'm beginning here with my own custom kernel
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Features of this Kernel:
- Built with latest Linaro Toolchain 5.3 GNU GCC made by ME , Cortex A15 tuned
- Latest Linux version 3.10.101, is always up to date
- Vibration strength and wake lock can be blocked threw kernel adiutor
- crc disabled (30% more performance)
- cfs/nfs/cdrom support built in
- Choose between different CPU governors: Interactive, Arteractive, Ondemand, Conservative, Userspace, Performance, Powersave, bioshock, lionheart, alucard, barry_allen, blu_active, cafactive, darkness, despair, electroactive, electrodemand, HYPER, intellidemand, intelliactive, interactive_x, intellimm, nightmare, ondemandplus, ondemand_x, pegasusq, smartassV2, smartmax, smartmax_eps, umbrella_core, yankactive, zzmoove
- CPU OC/UC AND GPU OC/UC
- MANY DIFFERENT HOTPLUGS: bricked_hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
- FauxSound V3.6 build in
- KCAL control for full control about your screen!
- Qcald v2 build in with a more updated version than samsungs stock kernel!
- Frandom support
- Voltage Control
- State Notifier included
- updated wireless drivers
- Adreno Idler build in
- Simple ondemand gpu
- Task's ADJ tree for better LMK
- Power_efficient_wq for better battery management
- CPU-Boost updated to work with state notifier (and add hotplug boost)
- Built with latest ramdisk sources from samsung (BOL1)
- Kernelsource from latest Update BOK2
- I/O schedulers: ROW (default), CFQ, Noop, deadline, test-iosched, BFQ-Iosched, fiops, sio, VR, zen, fifio, sioplus, tripndroid
- UKSM (Ultra-Kernel Samepage Merging)
- Init.d Support
- Busybox support
- Charging Control/ Fast Charge
- Allow ADB-Insecure
- ASYNC FSync from HTC
- Toggle to enable/disable fsync
- updated lowmemorykiller with better memory management
- TCP (Network) control: Cubic (default), Reno, Bic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- restrict rooting and tima disabled
Download:
V1.3 online
Bugs/Problems:
- None
Instructions:
If you want to install the Kernel, follow this:
1. Install a custom recovery for your phone, like this one here:TWRP Recovery
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your external SD Card
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Wipe cache and dalvik cache (recommand)
7. Reboot
Support:
If you like my work, please hit a thanks down on my posts. A thanks is enough!:highfive: If you really really really really really like my work, you can donate something to me, but it is not necessary. I created a paypal account, just in case, someone would give me a small donation. :good:
As I said, you don't have to give me something, but this keeps me motivated to built better Kernels and keep updating everything. It's your choice, and I'm very thankfull for every donation! No matter how big it is! Thank you so much for supporting me, cheers and have a nice day :fingers-crossed:
Credits/Thanks:
- Samsung for sources
- @faux123 for all the great stuff he did for the kernels
- @Yank555
- @dorimanx!
- @neobuddy83
If you want to take my work and need it somewhere, or do other things with it, please ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
XDA:DevDB Information
StockKernel kccat6, ROM for the Samsung Galaxy S5
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/StockKernel
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: V1.4
Stable Release Date: 2016-04-18
Created 2016-03-21
Last Updated 2016-09-15
Changelog:
Changelog V1.1:
- Initial release!
Changelog V1.1:
- Added kcal control with all upates(Kernel adiutor)
- Added OC and UC for GPU (166 to 800 MHz)
- Added OC and UC for CPU (268 until 2880 MHz)
- Added faux sound version 3.7
- Added frandom support
- Added voltage control
- Added bricked_hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
Changelog V1.2:
- cpufreq: cpu-boost: export input_boost_enable to userspace
- msm: thermal: add a module param to change the thermal throttle temperature point to userspace
- input: add generic touch event listener
- cpufreq: Introduce new relation for freq selection
- cpufreq: Break out early when frequency equals target_freq
- fs: sync: Asynchronous Fsync from HTC
- fs/sync: Make sync() satisfy many requests with one invocation
- fs: fsync: add a toggle to enable or disable fsync() operations
- sync: don't block the flusher thread waiting on IO
- Writeback: Fix occasional slow sync and some other fixes to writeback
- readahead: make context readahead more conservative
- update cfq iosched
- added back all governors from novakernel (over 30 governors build in the kernel now)
- added all ioscheds back and tuned them
- updated lowmemorykiller with some mods
Changelog V1.3:
- a lot of script updates/optimisations of the makefile
- lz4 Ramdisk supported
- cifs supported
- nfs supported
- cd-rom format supported
- stackprotecter updated
- kernel mode neon included
- implement state notifier to dcache
- vibration control added, control with kernel adiutor
- Sysfs interface to Enable/Disable CRC (crc disabled means 30% more performance)
- power updates
- led, blinking support
- usb: gadget: mass_storage: added sysfs entry for cdrom to LUNs
- rbtree updates
Changelog V1.4:
- fix drivedroid
- update cpufreq (many updates)
- added support for ntfs read and write
- updated hotplug drivers
- more things I may forgot
Reserved
It will working on NovaRom 1.5.5 or only StockRom?
DienoX said:
It will working on NovaRom 1.5.5 or only StockRom?
Click to expand...
Click to collapse
Should work on both
Sent with my Nova powered SM-G901F
More to come: differnet hotplugs, Sound control, kcal control and governors!
Sent with my Nova powered SM-G901F
Hi and thanks !
But still no deep sleep after speedtest, someone with the same problem ?
Thanks for the job ! Great kernel !
Envoyé de mon SM-G901F en utilisant Tapatalk
Hi, will it work on G906 models?
I have a problem with his headphones, there are sizzling . StockRom & stockkernel
Envoyé de mon SM-G901F en utilisant Tapatalk
CPU boost
Using Nova 1.5.5.So with Kernel Aduitor,is it right to enable CPU boost with all 4 cores to the maximum value (2457),or not?(Installed v1.0 using Philz Recovery.Phone seems to run better and faster than Guyver 0.9).
PhilCapron said:
Using Nova 1.5.5.So with Kernel Aduitor,is it right to enable CPU boost with all 4 cores to the maximum value (2457),or not?(Installed v1.0 using Philz Recovery.Phone seems to run better and faster than Guyver 0.9).
Click to expand...
Click to collapse
first: it's ok to run all 4 cores set on max value with all governors except performance
second: how did you figure it runs better and faster than Guyver's 0.9? There's no freakin' way !!!
the only kernel that runs better than Guyver's is @Tkkg1994 custom kernel witch is still in progress and we all wait for a stable version
artaniss11k said:
first: it's ok to run all 4 cores set on max value with all governors except performance
second: how did you figure it runs better and faster than Guyver's 0.9? There's no freakin' way !!!
the only kernel that runs better than Guyver's is @Tkkg1994 custom kernel witch is still in progress and we all wait for a stable version
Click to expand...
Click to collapse
Antutu scores are higher with this Kernel than 0.9,FWIW.
PhilCapron said:
Antutu scores are higher with this Kernel than 0.9,FWIW.
Click to expand...
Click to collapse
Antutu with Guyver's kernel: 76.792
Antutu with Tkgg1994's custom OC kernel : 79.535
What's your score with the stock one?
artaniss11k said:
Antutu with Guyver's kernel: 76.792
Antutu with Tkgg1994's custom OC kernel : 79.535
What's your score with the stock one?
Click to expand...
Click to collapse
Not getting those numbers with stock or guyver.
62 with 0.9.64 with v1.0.
Changelog V1.1:
- Added kcal control with all upates(Kernel adiutor)
- Added OC and UC for GPU (166 to 800 MHz)
- added OC and UC for CPU (268 until 2880 MHz)
- Added faux sound version 3.7
- added frandom support
- added voltage control
- Added bricked hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
- Some things I may forgot
for full changelog visit here: Kernel commits
download on the first page, second post
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Agadoo said:
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Click to expand...
Click to collapse
Same problme here.
Envoyé de mon SM-G901F en utilisant Tapatalk
netsba said:
Same problme here.
Envoyé de mon SM-G901F en utilisant Tapatalk
Click to expand...
Click to collapse
Agadoo said:
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Click to expand...
Click to collapse
netsba said:
I have a problem with his headphones, there are sizzling . StockRom & stockkernel
Envoyé de mon SM-G901F en utilisant Tapatalk
Click to expand...
Click to collapse
What do you mean with 'sizzling'?
I didn't notice anything different sound whise.
If you can explain to me what is happening while listening to music I can maybe help
Sent with my Nova powered SM-G901F
Without headphones I have a normal sound. With the headphones I have a very active and annoying background noise
Envoyé de mon SM-G901F en utilisant Tapatalk
@Tkkg1994
this v1.1 of the stock kernel is the stable version of your famous and long awaited custom kernel ?
DxT Kernel
* Your warranty is now void.
* I am not responsible for bricked devices, strained relationships,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
This kernel is only for Payton
Features
1. Built with Clang 13 + Polly optimize
2. Merge Linux kernel and driver as soon as possible
3. DxT is CAF based and uptodate with latest tag
4. Fixed all compile-time warnings
Other Features
1. kcal, sound gain control
2. CPU OC using some sdm660 frequencies ,[Little cores = 2.0ghz ,Big cores = 2.5ghz]
3. Added & Updated LZ4 for ZRAM (Enabled by Default)
4. AnyKernel3 Installer Script
5.Compiled With Latest Proton CLANG 12
6. Exfat driver comes from arter97
7. Available I/O scheduler: bfq, cfq(default), deadline
8. Available TCP congestion algorithm: westwood(default)
9. Merge some optimization commits from Sultan
10. Kernel-level cpusets parameter optimization, optimize CPU core calls
11. Latest Wireguard driver
12. Adreno GPU boost
13. Some other visible and invisible optimizations...
Due to different moto action implementation on different roms i made two versions
* normal version support roms like superior,pixel experience,msm-xtended,ancient
* L version support roms like LOS,crdroid,havoc,derpest
DOWNLOAD
DxT v4.2
DxT v4.2-L
DxT UC
OTA SUPPORT:
# DxT Kernel FKM Manager Support
This kernel has FKM Manager support for autoflash updates directly from the app.For this to work you must import the configuration link in the section "Flasher" of the app:
Then you must select the option: "Import a kernel download configuration"
This are the URLs for the two versions,just copy,paste and save. (You must add and save one first and if you want both versions available add the other after)
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
Telegram Group
Use the app EXKM, FK Manager, kernel adiutor or smartpack to tweak the kernel!
special thanks to all contributators
attack11, nathanchance , joshuous , akhilnarang , flar2 , kerneltoast , GuaiYiHu , Pzqqt
if u like my works u can donate
[email protected] - upi
https://www.paypal.me/cool585 -paypal
XDA:DevDB Information
DxT kernel, Kernel for the Moto X4
Contributors
dhinesh_cool
Source Code: https://github.com/DhineshCool/Dxt_payton
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v4.2
Created 2020-06-22
Last Updated 2021-07-25
## DxT Changelogs ##
v4.2
*upstreamed to v4.276
*merged latest caf tags
*latest proton clang
*improved cpu frequency
*clean up rarely working freq
*improved cpu idle
*fixed battery drain on idle
*removed prlmk to prevent twrp crash
*more code cleanup fro stability
V4.1
*Fixed battery drain issue
*Fixed some bugs
v4.0
*upstreamed to v4.270
*latest proton clang
*fully rebase
*rework thermal engine
*rework ram-managment
*lot see my git
ota json has been changed
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
v3.6
*upstreamed to v4.258
*latest proton clang
*added anxiety io for faster app opening
*added z3fold from sony
*improved zram performance
*updated ashmem
*fixed some thermal sensor spamming on logcat
*more fixes see my git
v3.5
*upstreamed to v4.253
*Merged tag LA.UM.9.2.r1-02000-SDMxx0.0
*latest proton clang
*Backport new vmalloc for "large performance benefits"
*selinux: Allow audit to be disabled
* page_alloc: double zone's batchsize
*nuke more debloat
*more optimation for better smoothness
now ui will be more smooth
*Updated wireguard to "1.0.20210124"
v3.4
*DxT rebased to caf base
*upstreamed to v4.251
*added persist bug fix
*latest proton clang
*Gpu added 710 freq
*more ion fixes from sultan
*Enable CONFIG_HID_NINTENDO
*Updated wireguard to "1.0.20201221"
v3.3
New Year Release
*upstreamed to v4.248
*latest proton clang
*Gpu oc to 800mhz
*no thermal throttling on gpu
*more ion fixes from sultan
*Updated wireguard to "1.0.20201221"
note uc version pushes to bimonthly release
v3.2
*upstreamed to v4.247
*fix payload calculation
*usb: Add Drivedroid Support
*power: msm-core: Fix mutex not getting unlocked in error path
*cpufreq: stats: optimize proc files
*mm: speed up mremap by 20x on large regions
*work on cpu idle
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clang
**** rework on uc version -it now fully stable no thermal throttling ****
*for the people on xda i released v3.1 on my telegram group , i forget to update on xda
that why directly releasing v3.2
v3.1
*upstream to v4.244
v3.0
*upstreamed to v4.240
*clean up codes
*fixed build warning
*added additional safetynet patch
*rework on thermals
*work on cpu idle
*work on ram managment
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clan
v2.8
*upstreamed to v4.239
*power: bcl: Improve power efficiency of the workqueue
*used latest proton clang (20201010)
v2.7
*upstreamed to v4.238
*qcacld-3.0: Disable Wifi SAE by default
*optimizations for block
*used latest proton clang (20200930)
v2.6
*upstreamed to v4.237
*New OC for payton (thnx to seba3567)
*Remove some scheduler
*ipc logging disabled
*changes on debugfs
*increase thermal trip points
*optimize gpu
*used latest proton clang (20200923)
Reserved
Much appreciated! I've been wanting a custom kernel for Moto x4!
Running on HavocOS 3.6, seemingly no issues. Definitely feels snappier than the base kernel. Will update after a couple days use.
Thanks again!
Installation instructions?
Zohaibzx said:
Installation instructions?
Click to expand...
Click to collapse
Method 1: Download and install the zip for your rom from the download links, then flash in twrp
Method 2: Use Franco Kernel Manager (requires root) and configure it to use the proper link listed under OTA support. FKM will read any new releases in Dhinesh's github, and update the kernel without a need to flash in recovery.
Hope that helps!
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Flashed using fkm in pixel rom. No issues
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
helo123 said:
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
Click to expand...
Click to collapse
U can manually set minimum freq
Zohaibzx said:
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
Click to expand...
Click to collapse
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
dhinesh_cool said:
U can manually set minimum freq
Click to expand...
Click to collapse
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
RBJ26 said:
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Click to expand...
Click to collapse
U need clean flash latest havoc then install
helo123 said:
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
Click to expand...
Click to collapse
Weird I will check ,but lag is due to ram management
I added some tweaks for ram management that was causing lag after sometime for 3gb variant I was aware of this issue I will fix soon
dhinesh_cool said:
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
Click to expand...
Click to collapse
1900-7 Dual Sim 3GB 32GB
dhinesh_cool said:
U need clean flash latest havoc then install
Click to expand...
Click to collapse
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
RBJ26 said:
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
Click to expand...
Click to collapse
Flash through twrp
Or u need root to flash via fk manager
dhinesh_cool said:
Flash through twrp
Or u need root to flash via fk manager
Click to expand...
Click to collapse
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
RBJ26 said:
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
Click to expand...
Click to collapse
On FKM u need to give proper permission to storage then on flasher u need select storage and give access