This ROM was made by ishubhamsingh and i will to share it with you!
Known Bugs:
-No Audio
-Fingerprint
-Homescreen don't wake up with homebutton
-NFC
Downloadlink:
Link removed,As per no source code given.TheMadScientist
Edi98 said:
Downloadlink:
https://drive.google.com/file/d/0B_g...w?usp=drivesdk
Click to expand...
Click to collapse
Hello, can this rom be installed for SM A510FD?
link down, is/was it even real?
Link updated.
Hi, good work. I'm working at Exynos7580 team on GitHub, so share used sources and maybe I can help you on some bugs!
I wiped everything without wiping sdcard and flashed the rom, flashed beans gapps then the bootlogo was the same as my previous rom (LyOS) and an error with kernel is not seandroid enforcing appeared.
Edit: I used smartswitch to get my device to official nougat firmware then I put TWRP again, wiped everything, flashed this rom and beans gapps then bootloop again with message "kernel is not seandroid enforcing".
DefiantPotato64 said:
I wiped everything without wiping sdcard and flashed the rom, flashed beans gapps then the bootlogo was the same as my previous rom (LyOS) and an error with kernel is not seandroid enforcing appeared.
Edit: I used smartswitch to get my device to official nougat firmware then I put TWRP again, wiped everything, flashed this rom and beans gapps then bootloop again with message "kernel is not seandroid enforcing".
Click to expand...
Click to collapse
To go back to default logo you'll need to either flash a zip with that logo or make a tar of the param partition (param.bin) to flash with odin.
It's not included in the single file firmware packages.
"kernel is not seandroid enforcing" is not an error. It's a warning. Nothing to worry about. It does that with non stock kernels even if it is enforcing.
It's to let you know that the kernel is not stock and you may be vulnerable.
You can check in rom if the kernel is enforcing or not. It may still be enforcing.
tys0n said:
To go back to default logo you'll need to either flash a zip with that logo or make a tar of the param partition (param.bin) to flash with odin.
It's not included in the single file firmware packages.
"kernel is not seandroid enforcing" is not an error. It's a warning. Nothing to worry about. It does that with non stock kernels even if it is enforcing.
It's to let you know that the kernel is not stock and you may be vulnerable.
You can check in rom if the kernel is enforcing or not. It may still be enforcing.
Click to expand...
Click to collapse
Ok but I have use Smart Switch to get the official stock Samsung nougat rom. Then I have flashed this aosp extended rom and got that kernel is not seandroid enforcing. And also it bootloops.
DefiantPotato64 said:
Ok but I have use Smart Switch to get the official stock Samsung nougat rom. Then I have flashed this aosp extended rom and got that kernel is not seandroid enforcing. And also it bootloops.
Click to expand...
Click to collapse
Ok. When you flash this rom, it will also flash the kernel that comes with it. That's why you get the warning.
Bootloop..did you wipe data, cache, dalvik in TWRP before you flashed the rom? Does it get stuck on logo or bootanimation?
I attach the param here so you can flash it in odin to get original logo back. Unzip it, put it in AP slot. It's taken from 4-file repair firmware.
View attachment SM-A510F-PARAM.tar.zip
tys0n said:
Ok. When you flash this rom, it will also flash the kernel that comes with it. That's why you get the warning.
Bootloop..did you wipe data, cache, dalvik in TWRP before you flashed the rom? Does it get stuck on logo or bootanimation?
I attach the param here so you can flash it in odin to get original logo back. Unzip it, put it in AP slot. It's taken from 4-file repair firmware.
View attachment 4236940
Click to expand...
Click to collapse
I do not need official logo because I have tried after that to get official firmware. Then I have flashed the rom after wiping everything, yes, (without sd card). It bootloops at logo (Samsung A5 2016) with "kernel is not seandroid enforcing". I am using A510F.
DefiantPotato64 said:
I do not need official logo because I have tried after that to get official firmware. Then I have flashed the rom after wiping everything, yes, (without sd card). It bootloops at logo (Samsung A5 2016) with "kernel is not seandroid enforcing". I am using A510F.
Click to expand...
Click to collapse
Ok, I though you meant that the logo didn't get restored using Smart Switch
Don't know why it loops on logo. There's screenshots of it so I assume it should be bootable.
I can't try it myself neither cause I got A310.
DefiantPotato64 said:
I do not need official logo because I have tried after that to get official firmware. Then I have flashed the rom after wiping everything, yes, (without sd card). It bootloops at logo (Samsung A5 2016) with "kernel is not seandroid enforcing". I am using A510F.
Click to expand...
Click to collapse
Me too, i'm using A510FD.
Well, the system folder in the zip contains only the build -prob
+the android version is 7.1.2 , which wasn't released yet for a5(2016).
I will have a look at the rom, I think it's for a5(2015) .
Edit: Works fine , just the usual bugs , i don't mind for fingerprint and home buton wake-up.
-Only the audio is the problem here.
Good Job for this ROM : )
Mihai.INdreias said:
Well, the system folder in the zip contains only the build -prob
+the android version is 7.1.2 , which wasn't released yet for a5(2016).
I will have a look at the rom, I think it's for a5(2015) .
Click to expand...
Click to collapse
When flashing I saw a5xeltexx which is the A510 model.
DefiantPotato64 said:
When flashing I saw a5xeltexx which is the A510 model.
Click to expand...
Click to collapse
I know , but it seems weird to me to see the 7.1.2 model on a5(6).
Sophia.xda said:
(292M) size wow its great rom.
Click to expand...
Click to collapse
Did it work for you?
I flash it, it work verry well, except the sound (work just with headphones), at least for me, the others bugs like fingerpeint and home button for wake up it's not a big deal cuz i don't use them anyway
Mihai.INdreias said:
Well, the system folder in the zip contains only the build -prob
+the android version is 7.1.2 , which wasn't released yet for a5(2016).
I will have a look at the rom, I think it's for a5(2015) .
Edit: Works fine , just the usual bugs , i don't mind for fingerprint and home buton wake-up.
-Only the audio is the problem here.
Good Job for this ROM : )
Click to expand...
Click to collapse
May I know the status of the build?
Share vendor- device-kernel please
Related
Well hello guys,
Being used to the flexibility of HTC ADB and fastboot commands for installing kernels i did something very stupid.
I just rooted, and tried to install XtreStoLite Pure Edition 1.0 on my Edge model SM-G925F. It would not work. So I thought it was the wrong Bootloader/Modem version.
Next thing I flashed the 2 files trough ODIN
Bootloader: XXU1AOE3
Modem: XXU1AOE3
Of course this Rom is not yet ready for the Edge model. Now I have a problem. The Phone keeps rebooting right after the boot logo. I already got some help and flashed the stock Firmware from Sammobile. The phone boots, goes to the samsung logo. The samsung Sound and then it reboots again.
Anyone has any idea?
Have you tried turning it off and on again? :grin
Kidding aside, go to recovery and wipe data and cache.
num1wr82 said:
Well hello guys,
Being used to the flexibility of HTC ADB and fastboot commands for installing kernels i did something very stupid.
I just rooted, and tried to install XtreStoLite Pure Edition 1.0 on my Edge model SM-G925F. It would not work. So I thought it was the wrong Bootloader/Modem version.
Next thing I flashed the 2 files trough ODIN
Bootloader: XXU1AOE3
Modem: XXU1AOE3
Of course this Rom is not yet ready for the Edge model. Now I have a problem. The Phone keeps rebooting right after the boot logo. I already got some help and flashed the stock Firmware from Sammobile. The phone boots, goes to the samsung logo. The samsung Sound and then it reboots again.
Anyone has any idea?
Click to expand...
Click to collapse
You need to flash an Edge kernel after you flashed the Rom, otherwise it won't work, since the both phones can't share the same kernel build
mythos234 said:
You need to flash an Edge kernel after you flashed the Rom, otherwise it won't work, since the both phones can't share the same kernel build
Click to expand...
Click to collapse
Thank you for the reaction. How do i flash a Kernel when i cannot load it to the SD storage? I cannot push it trough ADB and The edge TWRP MTP does not work yet.
mythos234 said:
You need to flash an Edge kernel after you flashed the Rom, otherwise it won't work, since the both phones can't share the same kernel build
Click to expand...
Click to collapse
I fixed it trough a factory reset in the stock recovery. Thank you!
Last resort would be smart switch. from Samsung. I helps very nice when you have a soft brick
http://www.samsung.com/uk/support/smartswitch/
Anything you could ever ask for to update your i777 in one place. Download link below...
ROM: cm-12.1-20151213-UNOFFICIAL-i777.zip
Features
Compiled with UBER toolchain (supposedly faster than standard toolchain)
Outgoing call bug fixed (hacked, whatever, it's not there anymore)
TRIM support (thanks to Lanchon)
Otherwise unchanged
CM is awesome.
GAPPS: tk_gapps-modular-pico-5.1.1-20150913-signed.zip
Features
Works.
MODEM: I777UCMD8_modem.zip
Features
Nobody knows, but it's the latest version that I'm aware of.
RECOVERY: SGH-S959G_TWRP_v2.7.1.0.zip
WARNING
This is for the S959G (which I think is identical in every way to the i777). It works on the S959G but I have not tested it on an i777.
XPOSED
So good. Works fine.
You need to install the .zip in recovery, and the .apk normally.
Uninstall .zip included.
Download
Installation instructions can be found on CM's website.
* If upgrading from CM12.1, wipe /data/dalvik-cache first (you probably don't even need to wipe /cache).
* If upgrading from any other ROM, you need to factory reset first (ie. wipe /cache and /data).
Good luck!
XDA:DevDB Information
CyanogenMod 12 [UNOFFICIAL] [UBER] for i777 + Call Bugfix + Goodies, ROM for the AT&T Samsung Galaxy S II SGH-I777
Contributors
dimoochka, Lysergic Acid, Lanchon, razer_kain, rogersb11, cyril279, other amazing devs...
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-09-26
Last Updated 2015-11-29
Directions?
Install Directions?
(Like the order and which ones we need to install, also clean flash or dirty?)
coolerboyj said:
Install Directions?
(Like the order and which ones we need to install, also clean flash or dirty?)
Click to expand...
Click to collapse
1. ROM
2. Kernel & GAPPS & Xposed -> All optional, order doesn't matter.
Modem can be flashed at any time and does not overlap with any of the above flashes.
Probably clean flash for most purposes unless you're coming from prior version of CM12.1
dimoochka said:
1. ROM
2. Kernel & GAPPS & Xposed -> All optional, order doesn't matter.
Modem can be flashed at any time and does not overlap with any of the above flashes.
Probably clean flash for most purposes unless you're coming from prior version of CM12.1
Click to expand...
Click to collapse
Couldn't get the phone to detect my sim card / get data connection. Tried flashing modem file, but verification failed with the new CM recovery . Any solutions?
s_spiff said:
Couldn't get the phone to detect my sim card / get data connection. Tried flashing modem file, but verification failed with the new CM recovery . Any solutions?
Click to expand...
Click to collapse
What device? I777? Also clean or dirty flash? I'll try to work on the modem issue sometime next week.
Clean install. Coming from cyanide Lollipop. Had TWRP when I flashed the kernel. I tried both flashing kernel first followed by the ROM as well as ROM followed by kernel. Both had the same issue.
s_spiff said:
Clean install. Coming from cyanide Lollipop. Had TWRP when I flashed the kernel. I tried both flashing kernel first followed by the ROM as well as ROM followed by kernel. Both had the same issue.
Click to expand...
Click to collapse
I built a fully updated version (20151104) last night (see first post for download link). You no longer need to install Lanchon's kernel (TRIM support is built in).
I am installing this ROM on my own device (S959G) right now and testing it out.
Instructions:
1) Optional, if you want to try to flash the modem: install the version of TWRP you had initially, and try to flash the modem through that.
2) Install ROM.
3) Install GAPPS
4) Install XPOSED (if you want - make sure to re-download as the version is updated from v74 to v75).
OK. its been a while since i flashed a lollipop rom. so here i go. im currently running shostock3 v4.0 on my i777. if i flash a kitkat compatible recovery
( CWM-KitKatCompatible-i777.zip), i can flash this rom right? i'd do a full wipe, data,cache,system then flash rom>gapps>xposed....i should be good? right?
mmystere68 said:
OK. its been a while since i flashed a lollipop rom. so here i go. im currently running shostock3 v4.0 on my i777. if i flash a kitkat compatible recovery
( CWM-KitKatCompatible-i777.zip), i can flash this rom right? i'd do a full wipe, data,cache,system then flash rom>gapps>xposed....i should be good? right?
Click to expand...
Click to collapse
That's right. Not 100% sure about the recovery (I've never used that one), but I think you would be in good shape. Make a backup onto your computer first so that you have a contingency plan in case you soft brick.
If you're flashing on the i777, then I believe this ROM will replace your recovery with the stock CM12 recovery (just FYI - should be inconsequential).
dimoochka said:
That's right. Not 100% sure about the recovery (I've never used that one), but I think you would be in good shape. Make a backup onto your computer first so that you have a contingency plan in case you soft brick.
If you're flashing on the i777, then I believe this ROM will replace your recovery with the stock CM12 recovery (just FYI - should be inconsequential).
Click to expand...
Click to collapse
Haha...i always do a backup before flashing a rom...just made one in reserve. Download just finished...gonna try it out right now and test it. will post feedback later on...
UPDATE: flashed and booted up nicely.....but once i rebooted the phone, it stuck on samsung galaxy s2 logo with yellow triangle....
Update 2: i think xposed module messed up the system....did a data wipe and it boots up fine now.....need to setup everything all over again...hope i dont get that prob again....
mmystere68 said:
Haha...i always do a backup before flashing a rom...just made one in reserve. Download just finished...gonna try it out right now and test it. will post feedback later on...
UPDATE: flashed and booted up nicely.....but once i rebooted the phone, it stuck on samsung galaxy s2 logo with yellow triangle....
Update 2: i think xposed module messed up the system....did a data wipe and it boots up fine now.....need to setup everything all over again...hope i dont get that prob again....
Click to expand...
Click to collapse
Yeah I installed an older version of xposed (v74) in the past and it caused a bootloop. Using v75 with this nightly has been pretty stable for me.
New nightly uploaded to link in op.
dimoochka said:
New nightly uploaded to link in op.
Click to expand...
Click to collapse
I installed this new version in my s2 i777 but it failed
pepe100 said:
I installed this new version in my s2 i777 but it failed
Click to expand...
Click to collapse
What was the problem? I dirty flashed on mine from the prior version and it's been working fine. Maybe try clean flash?
dimoochka said:
What was the problem? I dirty flashed on mine from the prior version and it's been working fine. Maybe try clean flash?
Click to expand...
Click to collapse
It stuck in the cm screen I did a full wipe. I am going to try the next released when available. Thanks for develop for our device.
pepe100 said:
It stuck in the cm screen I did a full wipe. I am going to try the next released when available. Thanks for develop for our device.
Click to expand...
Click to collapse
New build and xposed uploaded. I installed it on my S959G last night and it works fine.
dimoochka said:
New build and xposed uploaded. I installed it on my S959G last night and it works fine.
Click to expand...
Click to collapse
Thanks bro
pepe100 said:
Thanks bro
Click to expand...
Click to collapse
New build uploaded (working fine on my S959G).
I'm stuck on the CM logo. Worse, I thought this came with TWRP. It comes with the CM recovery. I made a back up with TWRP and moved it to my computer prior to flashing. The CM recovery is worthless. Not sure where to start getting back to my old Rom (Omni 4.4.4).
Edit: Good to go and back on 4.4.4. I was hoping to move forward with this version. Not sure what happened. I used Odin to install the Siyah kernel with CWM and then was able to flash a Kernel with twrp to restore my back up.
I'm wondering if I had flashed a Kernel with TWRP at the beginning if it would have made a difference. I may try that now since I'll be looking at the triangle screen from now on anyway.
I do recommend that it be clear in the OP that the stock Kernel contains CM recovery and not TWRP.
Madcat8686 said:
I'm stuck on the CM logo. Worse, I thought this came with TWRP. It comes with the CM recovery. I made a back up with TWRP and moved it to my computer prior to flashing. The CM recovery is worthless. Not sure where to start getting back to my old Rom (Omni 4.4.4).
Edit: Good to go and back on 4.4.4. I was hoping to move forward with this version. Not sure what happened. I used Odin to install the Siyah kernel with CWM and then was able to flash a Kernel with twrp to restore my back up.
I'm wondering if I had flashed a Kernel with TWRP at the beginning if it would have made a difference. I may try that now since I'll be looking at the triangle screen from now on anyway.
I do recommend that it be clear in the OP that the stock Kernel contains CM recovery and not TWRP.
Click to expand...
Click to collapse
The bootloop is weird - did you inadvertently install an old version of Xposed (happened to me once)? Wipe data/cache/system and reflash - should do the trick.
I'll try to build a TWRP'ed version, shouldn't be too hard...
Ok so.. I am having some problems. Never had many issues with rooting etc before but my S6 Edge is being surprisingly difficult.
it an SM-G925I on 6.0.1 EPIK build
I've tried the Skipsoft tool thing multiple times. But for the love of god I cannot get a recovery installed nor root.
I've had the booting back to stock recovery problem along the way and followed the steps to boot into the custom but every time I go through the options and follow the steps by the time I try, the phone brings up recovery is not seandroid enforcing in RED in the top left of the screen.
I can just hold volume down and power to reboot back to android but so far I have not been having any luck getting root and recover =\
Any help greatly appreciated.
usb debugging enabled, obviously, Knox disabled (had to turn off reset protection to get Odin to flash)
aulterra said:
Ok so.. I am having some problems. Never had many issues with rooting etc before but my S6 Edge is being surprisingly difficult.
it an SM-G925I on 6.0.1 EPIK build
I've tried the Skipsoft tool thing multiple times. But for the love of god I cannot get a recovery installed nor root.
I've had the booting back to stock recovery problem along the way and followed the steps to boot into the custom but every time I go through the options and follow the steps by the time I try, the phone brings up recovery is not seandroid enforcing in RED in the top left of the screen.
I can just hold volume down and power to reboot back to android but so far I have not been having any luck getting root and recover =\
Any help greatly appreciated.
usb debugging enabled, obviously, Knox disabled (had to turn off reset protection to get Odin to flash)
Click to expand...
Click to collapse
Flash twrp through odin for custom recovery.
Cf autoroot for root flash through odin also.
Or
Flash supersu 2.78 sr1 systemless through twrp
callumbr1 said:
Flash twrp through odin for custom recovery.
Cf autoroot for root flash through odin also.
Or
Flash supersu 2.78 sr1 systemless through twrp
Click to expand...
Click to collapse
The tool I used was meant to basically do all of that but I cannot get passed the same issues I mentioned in my post.
aulterra said:
The tool I used was meant to basically do all of that but I cannot get passed the same issues I mentioned in my post.
Click to expand...
Click to collapse
Try to use what i said. Not the tool you used before. Do it manually ot will work
callumbr1 said:
Try to use what i said. Not the tool you used before. Do it manually ot will work
Click to expand...
Click to collapse
as I said, when I do it manually too, I conitnue to receive the same issues.
aulterra said:
as I said, when I do it manually too, I conitnue to receive the same issues.
Click to expand...
Click to collapse
Try to flash uni kernel flashable zip through odin, that should stop the seandroid error.
callumbr1 said:
Try to flash uni kernel flashable zip through odin, that should stop the seandroid error.
Click to expand...
Click to collapse
Do you have links to the correct things I need?
aulterra said:
Do you have links to the correct things I need?
Click to expand...
Click to collapse
https://download.chainfire.eu/791/CF-Root/CF-Auto-Root/CF-Auto-Root-zerolte-zeroltedv-smg925i.zip
Download that autoroot. Install the odin v3.10.6.
Flash the cf autoroot first and then tell me what happens after phone reboots.
callumbr1 said:
https://download.chainfire.eu/791/CF-Root/CF-Auto-Root/CF-Auto-Root-zerolte-zeroltedv-smg925i.zip
Download that autoroot. Install the odin v3.10.6.
Flash the cf autoroot first and then tell me what happens after phone reboots.
Click to expand...
Click to collapse
Thanks, I'll give it a go again Tomorrow (2 am atm)
aulterra said:
Thanks, I'll give it a go again Tomorrow (2 am atm)
Click to expand...
Click to collapse
Okay keep me updated
callumbr1 said:
Okay keep me updated
Click to expand...
Click to collapse
Ok so flashed the autoroot Hopefully right. Used the AP section, booted into download mode and flashed, it was succesful then restarted with the seandroid error But a second or so passed and it booted into cf autoroot which successfully rooted my device.
I guess that's a good thing.
Now all I need to do Is manage to install a custom recovery and find the best rom xD
Thanks for the help so far,
Eagerly waiting for more ^_^
aulterra said:
Ok so flashed the autoroot Hopefully right. Used the AP section, booted into download mode and flashed, it was succesful then restarted with the seandroid error But a second or so passed and it booted into cf autoroot which successfully rooted my device.
I guess that's a good thing.
Now all I need to do Is manage to install a custom recovery and find the best rom xD
Thanks for the help so far,
Eagerly waiting for more ^_^
Click to expand...
Click to collapse
Cool,,
Now download root checker from app store and install it. Press verify root to check.
Easiest way to flash twrp now is to download flashify from playstore.
https://play.google.com/store/apps/details?id=com.cgollner.flashify
From there you can easily flash twrp.
Hope that works mate
callumbr1 said:
Cool,,
Now download root checker from app store and install it. Press verify root to check.
Easiest way to flash twrp now is to download flashify from playstore.
https://play.google.com/store/apps/details?id=com.cgollner.flashify
From there you can easily flash twrp.
Hope that works mate
Click to expand...
Click to collapse
Ok so great news! Flashify worked and I think is amazing.. haha...
ONLY PROBLEM NOW.. is any roms I install don't seem to work. I can wipe, flash and then boot and the phone either gets stuck on the samsung full logo Or the animated glowing samsung boot image. Atleast I think. CarHD rom seemed stuck on the boot image for more than 5 minutes.
Any ideas?
aulterra said:
Ok so great news! Flashify worked and I think is amazing.. haha...
ONLY PROBLEM NOW.. is any roms I install don't seem to work. I can wipe, flash and then boot and the phone either gets stuck on the samsung full logo Or the animated glowing samsung boot image. Atleast I think. CarHD rom seemed stuck on the boot image for more than 5 minutes.
Any ideas?
Click to expand...
Click to collapse
It's normal when you flash a rom for it to take around 10 minutes to boot first time. I'm currently using car HD rom. The first time you flash it, it will stick on Samsung glowing logo for around 10 minutes maybe more. But give it time it will boot. There's a good choice of roms available but check they are compatible first line. Also in aroma installer for CarHD rom select full wipe
callumbr1 said:
It's normal when you flash a rom for it to take around 10 minutes to boot first time. I'm currently using car HD rom. The first time you flash it, it will stick on Samsung glowing logo for around 10 minutes maybe more. But give it time it will boot. There's a good choice of roms available but check they are compatible first line. Also in aroma installer for CarHD rom select full wipe
Click to expand...
Click to collapse
Ok! So I waited heaps longer like you suggested. It booted but for the love of god I can't stand that rom xD
Do you have any rom suggestions for my model?
aulterra said:
Ok! So I waited heaps longer like you suggested. It booted but for the love of god I can't stand that rom xD
Do you have any rom suggestions for my model?
Click to expand...
Click to collapse
Did you flash the aroma theme? If you just flash the ROM without the themes then it is just like stock ROM but with mods like viper, ad away and some good customisation options in ROM control and OTA
There's tyrannus rom, alexis rom, xtrestolite
Have a look on here there's quite a few
PROBLEM SOLVED, THANK YOU !
Hi.
I just recently rooted my Honor 5X (KIW-UL00 , it's the chinese model)
I then tried installing a custom ROM, the LineageOS. Problem being that I was stuck in a weird BootLoot. When I rebooted the system, it showed me the usual Honor page for like 4-5 seconds, then the loading screen for LineageOS. After like 10 seconds, the animation stopped, the thing crashed and my phone restarted to the Honor page, then Lineage, then crash ... So I booted my phone with TWRP, tried Wiping the Cache and System and started over again with installing Lineage. The same thing happened. I then tried with 3 other custom ROM'S and the same thing happened. I don't know what I did wrong, I am wiping my cache and Dalvic each time, but I can't figure out what to do.
I'm looking for someone who could help me fix this. I am thinking about flashing the stock ROM, I just don't know how to do it, because it seems different than the custom ROM'S
PS: I'm looking for a kick fix, because I kinda really need my phone xD
Thank you!
Ok so, quick update, I got rid of TWRP by flashing the stock recovery over it. I tried to follow this:
https://forum.xda-developers.com/honor-5x/help/honor-5x-kiw-ul00-boot-loop-t3449554
(DigiGoon's first answer) but it told me that the installation failed.
So in short, my phone is actually in a endless bootloob, trying to boot no ROM, because the're none.
what's the stock system version you were running before you flashed the custom rom? B418 is the latest non VoLTE firmware.
It was Marshmallow 6.0.1... I found my mistake
We can't downgrade using the SD card method and I was trying to install 5.0
Now I need to find the stock version for the KIW-UL00 6.0.1
you can downgrade with the help of hisuite by huawei.
if your stock system was above B422, you can use this patch to stop the bootloop,
just flash the file in twrp after you flash the rom. https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Problem is that I dont have any ROM or custom recovery running on my phone. I can only acess the bootloader, the eRecovery (that for some magical reasons, doesn't work for me) and the SD card installer, that also doesnt work because the only thing I can find is a UPDATE.APP that is on 5.0, when my phone was on 6.0.1, which doesn't work.
HiSuite doesn't even connect and I don't know what VolTE is, can you explain?
Can someone can help me in finding the Stock ROM for KIW-UL00 (the chinese version of Honor 5x) on android 6.0.1. I can find those for every country except china...
EDIT, I was able to get back on TWRP, so I can add files in my phone
haubudam, i freaking love you dude, you saved me
Thank you SOOOOOOO much
haubudam said:
you can downgrade with the help of hisuite by huawei.
if your stock system was above B422, you can use this patch to stop the bootloop,
just flash the file in twrp after you flash the rom. https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Click to expand...
Click to collapse
Thanks man. I was also stuck up in the same problem for a day and flashing BaPatch.zip solved the issue.
Uvneshkumar said:
Thanks man. I was also stuck up in the same problem for a day and flashing BaPatch.zip solved the issue.
Click to expand...
Click to collapse
Can u send me the screenshot of files in zip?
gopinaidu77 said:
Can u send me the screenshot of files in zip?
Click to expand...
Click to collapse
https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Uvneshkumar said:
https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Click to expand...
Click to collapse
Thank you
haubudam said:
you can downgrade with the help of hisuite by huawei.
if your stock system was above B422, you can use this patch to stop the bootloop,
just flash the file in twrp after you flash the rom.
Click to expand...
Click to collapse
My version of the firmware is B245. Your patch did not help me, there is no newer version of firmware for KISH-UL00 than 245. What should I do?
Sodomit666 said:
My version of the firmware is B245. Your patch did not help me, there is no newer version of firmware for KISH-UL00 than 245. What should I do?
Click to expand...
Click to collapse
It was necessary to update the stock firmware to the latest version and then flash custom.
SND (Stock Nougat Debloated) ROMJUNE 2018 SECURITY PATCHFeatures:
Stock Nougat 7.0
Debloated
Alexis Surround Sound Mod v2
YouTube Vanced
BTU CSC
Ultimate Kernel V1.0 by Enes
SMOOTH, SNAPPY AND FAST
COMPATIBLE WITH:SAMSUNG GALAXY S6 SM-G920F/I ONLY
DOWNLOAD:
CLICK HEREClick on SND ROM
Credits:
- Enes for the Kernel
- AlexisXDA for the Surround Sound Mod V2
- Team Vanced for the YouTube Vanced APK
- Super Rs Kitchen (I used to build the ROM)
XDA:DevDB Information
SND (Stock Nougat Debloated), ROM for the Samsung Galaxy S6
Contributors
U99Dev
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 7.0
Version Information
Status: Stable
Created 2018-08-09
Last Updated 2018-08-09
Thanks, going back to stock until we see if Oreo can be ported.
I can't flash zip by TWRP !!!
TimeOFTimeless said:
I can't flash zip by TWRP !!!! It doesn't be installed and reboot
Click to expand...
Click to collapse
You need to install the zip, then flash root.
U99Dev said:
You need to install the zip, then flash root.
Click to expand...
Click to collapse
I installed Rom by TWRP, then done, the system restarts but keep hanging on to TWRP, not load Rom
timeoftimeless said:
i installed rom by twrp, then done, the system restarts but keep hanging on to twrp, not load rom
Click to expand...
Click to collapse
flash root! Read the post
U99Dev said:
flash root! Read the post
Click to expand...
Click to collapse
Could you please share me Root file ?
TimeOFTimeless said:
Could you please share me Root file ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
U99Dev said:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Click to expand...
Click to collapse
Ok, thankss bro, i am testing
Is it possible to delete the surround mod as I would like to install V4A ?
The link is broken on the surround post .
Thank you for sharing your work !
Kzeran said:
Is it possible to delete the surround mod as I would like to install V4A ?
The link is broken on the surround post .
Thank you for sharing your work !
Click to expand...
Click to collapse
It's easy to do. Just delete the file system/etc/mixer_paths.xml and just rename system/etc/mixer_paths_bak.xml to mixer_paths.xml
Is there maybe an edge version
What is wrong with all YT background players. They all started go bad after 1 song or so. I must open the screen and let the app reload the clip. OMG!>!>! Youtube just played us! Even YouTube Vanced from this rom is not working corectly.
Thanks for making this ROM available!
Today I did the following (coming from Lineageos 14.1, latest build, on a G920F):
Create a Nandroid backup
Factory Reset
Wipe cache and Dalvik cache
Flash SND Rom
Flash Magisk 16.0
But after rebooting, my phone is stuck on the Samsung logo, with the blue led very slowly pulsing. I've booted into TWRP again, and flashed both the ROM and Magisk ZIP another time. However, same result.
Edit: Never mind ... tried it a third time, and now it works.
Edit2: Hmm ... same issue after doing a factory reset in the stock ROM, and rebooting ... I think I'll go back to LOS 14.1 for now.
Johan132 said:
Thanks for making this ROM available!
Today I did the following (coming from Lineageos 14.1, latest build, on a G920F):
Create a Nandroid backup
Factory Reset
Wipe cache and Dalvik cache
Flash SND Rom
Flash Magisk 16.0
But after rebooting, my phone is stuck on the Samsung logo, with the blue led very slowly pulsing. I've booted into TWRP again, and flashed both the ROM and Magisk ZIP another time. However, same result.
Edit: Never mind ... tried it a third time, and now it works.
Edit2: Hmm ... same issue after doing a factory reset in the stock ROM, and rebooting ... I think I'll go back to LOS 14.1 for now.
Click to expand...
Click to collapse
First boot can take up to 30min.
Is it safe, the surround mod? Does it cause any damage to the earpiece?
Firdos Jamal said:
Is it safe, the surround mod? Does it cause any damage to the earpiece?
Click to expand...
Click to collapse
No damage. This is the balanced version.
Can i install this rom with custom s6 edge kernel...will it work on s6edge?
Audio FX
U99Dev said:
It's easy to do. Just delete the file system/etc/mixer_paths.xml and just rename system/etc/mixer_paths_bak.xml to mixer_paths.xml
Click to expand...
Click to collapse
No. Isn't easy to do. I deleted the original mixer_paths.xml but the file mixer_paths_bak.xml inside etc folder it's missing or doesn't exist originally. I'm trying to remove completely the Alexis surround mod to install stock audio conf and use viper4android. Actually I have installed V4A but not working says: driver status: abnormal. Any idea?
Johan132 said:
Thanks for making this ROM available!
Today I did the following (coming from Lineageos 14.1, latest build, on a G920F):
Create a Nandroid backup
Factory Reset
Wipe cache and Dalvik cache
Flash SND Rom
Flash Magisk 16.0
But after rebooting, my phone is stuck on the Samsung logo, with the blue led very slowly pulsing. I've booted into TWRP again, and flashed both the ROM and Magisk ZIP another time. However, same result.
Edit: Never mind ... tried it a third time, and now it works.
Edit2: Hmm ... same issue after doing a factory reset in the stock ROM, and rebooting ... I think I'll go back to LOS 14.1 for now.
Click to expand...
Click to collapse
Same thing happened here. I flashed Magisk, did a full wipe, etc. Stuck at the Samsung logo, pulsing, but not going anywhere. I gave it an hour to boot up the first time. I've reflashed a few times, no dice. The phone is warm the entire time so the CPU is doing something, idk what though.