VV READ THIS BEFORE DOING ANYTHING ELSE VV
By using this ROM you agree to these conditions:
1. I am not responsible for anything that you do or that happens to you that is related to the ROM in anyway.
2. You have an advance knowledge of how this stuff works before trying it yourself.
3. You have backups and know how to recover your data if something was to happen.
I am not connected in any way, shape or form to AOSPA. I just respect them and like what they do.:good:
I did not make this ROM. All I've done is compiled it from the source on GitHub, anyone could do that. ----> https://github.com/AOSPA/android_kernel_oneplus_msm8974
Okay I believe that covers me, so lets get down to the specifics.
It takes me approximately 35m to compile a new build, I'll do this either weekly or sub-weekly if there's a bad bug that's been fixed.
I have not had any problems thus far with it.
To flash this I strongly recommend you
1. Use the latest TWRP.
2. Have a backup in case you mess something up.
3. Wipe only these partitions: system, data and both caches. DO NOT EVER WIPE THE INTERNAL STORAGE OR THE OTG DRIVE
4. Flash the ROM.
5. Flash the most recent Open GApps [ARM] [7.1] the variant is up to you but I recommend [PICO]
6. Reboot and enjoy!:good:
Bugs:
I don't know, you tell me. I haven't had anything go wrong.
Here you go:
https://goo.gl/Ph7SmW pa_bacon-7.3.0-DEV-20171009.zip
https://goo.gl/VE5rdx pa_bacon-7.3.0-DEV-20171009.zip.md5sum
https://youtu.be/PH3pG8xU5QQ
This shows exactly what I'm doing. Enjoy!
joefso said:
can you build paranoid android with OOS blobs V3?
It uses 2.x right now, right?
Click to expand...
Click to collapse
Possibly. Tell me where I get the blobs from. And I'll work from there.
Techie Android said:
Possibly. Tell me where I get the blobs from. And I'll work from there.
Click to expand...
Click to collapse
it is from this thread and the Bacon (OOS 3.x blobs) can be found here
joefso said:
it is from this thread and the Bacon (OOS 3.x blobs) can be found here
Click to expand...
Click to collapse
Okay thanks I'll update you on my results.:good:
Techie Android said:
Okay thanks I'll update you on my results.:good:
Click to expand...
Click to collapse
This might be of use to you... HalogenOS ( they dropped bacon, maintainer had no time) used OOS 3.1.3., their github can be found here
Same as PA ?
OP,please add "unofficial" to the title.I know you've kind of mentioned that in OP but still.. It wouldn't hurt.
Also, "It takes me approximately 35m to compile a new build". What kind of internet you have?!
---------- Post added at 06:22 PM ---------- Previous post was at 06:20 PM ----------
Piypoo said:
Same as PA ?
Click to expand...
Click to collapse
Yeah,only difference is that it is unofficial as of now.
Mr.Ak said:
Yeah,only difference is that it is unofficial as of now.
Click to expand...
Click to collapse
Alrighty. Thankyou.
Mr.Ak said:
OP,please add "unofficial" to the title.I know you've kind of mentioned that in OP but still.. It wouldn't hurt.
Also, "It takes me approximately 35m to compile a new build". What kind of internet you have?!
---------- Post added at 06:22 PM ---------- Previous post was at 06:20 PM ----------
Yeah,only difference is that it is unofficial as of now.
Click to expand...
Click to collapse
What do you mean? My internet is 100mbps (12MB/s). I have moderate specs for a PC, i5-6402p, 8GB RAM and SATA lll 3TB HDD 64MB cache, Kubuntu 17.10 with modifications and bleeding edge software updates (I'm moving to Gentoo soon).
What do you mean "unofficial as of now"? I don't see a need to add it if it's not a requirement.
Techie Android said:
What do you mean? My internet is 100mbps (12MB/s). I have moderate specs for a PC, i5-6402p, 8GB RAM and SATA lll 3TB HDD 64MB cache, Kubuntu 17.10 with modifications and bleeding edge software updates (I'm moving to Gentoo soon).
What do you mean "unofficial as of now"? I don't see a need to add it if it's not a requirement.
Click to expand...
Click to collapse
Nvm,it's your own choice anyways,it just makes thread more sophisticated.BTW,your internet is amazing,I'd only wish an internet like this.
Techie Android said:
[reserved]
Click to expand...
Click to collapse
Don't forget to post sources (kernel is required)..
Having installed magisk, opengapps, default apps I always use on each rom i lose 12% battery over night. Temporary switched back to another ROM... need stability.
Will try soon again
Any changes made versus the latest official AOSPA build? NFC? Camera?
joefso said:
Having installed magisk, opengapps, default apps I always use on each rom i lose 12% battery over night. Temporary switched back to another ROM... need stability.
Will try soon again
Click to expand...
Click to collapse
Use greenify.
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
eiwarmer said:
Any changes made versus the latest official AOSPA build? NFC? Camera?
Click to expand...
Click to collapse
I don't think there's any change to NFC.I'll have to try out this ROM to compare camera against official PA,which I'll do soon.
Setting.Out said:
Don't forget to post sources (kernel is required)..
Click to expand...
Click to collapse
I did post where the sources are from. GitHub.
Techie Android said:
All I've done is compiled it from the source on GitHub, anyone could do that.
Click to expand...
Click to collapse
joefso said:
Having installed magisk, opengapps, default apps I always use on each rom i lose 12% battery over night. Temporary switched back to another ROM... need stability.
Will try soon again
Click to expand...
Click to collapse
eiwarmer said:
Any changes made versus the latest official AOSPA build? NFC? Camera?
Click to expand...
Click to collapse
Not having any stability problems myself but I'll look into it. I did not change anything from the master on GitHub, no modifications, pure AOSPA.
Techie Android said:
I did not change anything from the master on GitHub, no modifications, pure AOSPA.
Click to expand...
Click to collapse
Sooooo you're just compiling moments before the PA team does without any changes? This means I could just wait for the PA-team to compile their build and I'll get exactly the same, right? Or am I missing something here
eiwarmer said:
Sooooo you're just compiling moments before the PA team does without any changes? This means I could just wait for the PA-team to compile their build and I'll get exactly the same, right? Or am I missing something here
Click to expand...
Click to collapse
I don't know what you mean by moments before they do. But yeah what I compile is exactly the same as if they were to release an update. But they haven't all they have on their website is AOSPA 7.2.1. That's the whole point of why I'm doing it, I liked the ROM but wanted updates, so when they make improvements on the master I pull the changes and compile a new build.
Mr.Ak said:
Use greenify.
Click to expand...
Click to collapse
you failed to comprhend my point. Also not asking for advise.
joefso said:
you failed to comprhend my point. Also not asking for advise.
Click to expand...
Click to collapse
Calm down. There's no need to get worked up over it.
Related
I built AOSP 5.0 Release 2 (a.k.a. Lollipop) for Nexus 5. This is PURE AOSP Lollipop. Enjoy. Also always remember I'm not responsible for anything. ROM is tested. Kernel is stock prebuilt AOSP kernel.
Download:
https://www.androidfilehost.com/?fid=95784891001606871
Installation:
1) Wipe all the partitions except Internal Storage.
2) Flash ROM.
3) Flash Gapps (You can find gapps packages for Lollipop/L-preview at XDA.)
4) Enjoy
Source:
ROM: https://android.googlesource.com
Vendor Tree: https://github.com/yashade2001/nexus-lollipop-preview-vendor.git
Kernel (Prebuilt): https://android.googlesource.com/device/lge/hammerhead-kernel/+/lollipop-release
Device Tree: https://android.googlesource.com/device/lge/hammerhead/+/lollipop-release
For manifest, I used "android-5.0.0_r2" branch.
Thanks! Been playing around with the first preview. I think it's time to move on to something more recent.
Since this is source build, do we need to flash Gapps separately? If yes, any link for material gapps?
EDIT: Sorry, some info in OP.
Thanks yashade
good work mate, downloading it now
---------- Post added at 06:31 PM ---------- Previous post was at 06:21 PM ----------
neobuddy89 said:
Since this is source build, do we need to flash Gapps separately? If yes, any link for material gapps?
EDIT: Sorry, some info in OP.
Click to expand...
Click to collapse
i found this in a nather thread
https://www.androidfilehost.com/?fid=95784891001606650
Are they still sticking with the 3.4 kernel for the Nexus 5, despite the Nexus 6 and 9 both having the much more recent 3.10 kernel?
@Rolle90, @neobuddy89, That gapps force closes on psychos build. He is redoing some stuff now. He got his from next door in illusion thread. Might want to look around first
Does tethering work in this latest build?
thanks, but this is not an original rom, and does not go into the n5 original development threads. it goes to the android development section, since you did not make up android 5.0.
nh1402 said:
Are they still sticking with the 3.4 kernel for the Nexus 5, despite the Nexus 6 and 9 both having the much more recent 3.10 kernel?
Click to expand...
Click to collapse
Unfortunately, YES.
Old PM structure. Old mem structure. No CPU boost. No much cream layer of audio. Just imp fixes and minor features on top of kk 3.4 kernel.
---------- Post added at 12:32 AM ---------- Previous post was at 12:32 AM ----------
razrlover said:
@Rolle90, @neobuddy89, That gapps force closes on psychos build. He is redoing some stuff now. He got his from next door in illusion thread. Might want to look around first
Click to expand...
Click to collapse
Anyone ... anything on confirmed working gapps for L?
Your Build with this Gapps https://docs.google.com/file/d/0B2KoxninDIpNTjJ6YXhSSTRTN0U/edit?usp=docslist_api
work for me , contacts sync
so is this the final 5.0 build or no?
Tylog said:
Your Build with this Gapps https://docs.google.com/file/d/0B2KoxninDIpNTjJ6YXhSSTRTN0U/edit?usp=docslist_api
work for me , contacts synch.
Click to expand...
Click to collapse
How's the performance compared to dev preview?Is this faster?tnx
Dajinn said:
so is this the final 5.0 build or no?
Click to expand...
Click to collapse
Kind of, it's the base they're going to use for the release version. It doesn't have gapps and little things.
where can I download the gapps ?
_Magic said:
where can I download the gapps ?
Click to expand...
Click to collapse
Man it is literally first post of this page-
http://forum.xda-developers.com/showpost.php?p=56526805&postcount=11
gaurav2009 said:
Man it is literally first post of this page-
http://forum.xda-developers.com/showpost.php?p=56526805&postcount=11
Click to expand...
Click to collapse
oh sorry
I hadn't seen that post but thank you so much for your answer
Thank you for this! Anyone got this running using MultiROM?
Whats vendor and device tree
another question before install:
Which languages are available ?
Hello everyone, after a great success on building roms for bacon device. I've decided to share my work with other devices. So now I share with hammerhead. After positive feedback on the rom today I'll publish here the rom.
Kernel and Device tree are untouched so everything should be working smoothly. You can use a custom kernel in case you like, but i'll only give support to stock kernel as I do not yet own an device. So CM bugs are basically also our bugs, and from what I know there is none. Still I'm open to suggestions.
Download
GAPPS
Features:
Updated SQL to 3.11.0.0
Optimized SQL code for faster Read/Write
CM Super User (for now is the most stable one)
Kernel with F2FS support
Improved Code of frameworks
Optimized Build with custom toolchain on ROM and Kernel
Optimizations for our chip
Improved sound with speex resampler
Improved bionic with many optimized libraries (faster rom)
Improved Art with upstream patches
Optimized native frameworks for our device
LZMA updated to the latest
Proguard 5.2.1
Google Webview
F2FS ready for data and cache
Immersive mode
Expanded Notifications
CAF Task Manager
Snapdragon Camera
Network Monitor
More coming soon
I'm a very praticle user, and my aim will be to get a very fluid stable system, at same time with speed and battery, keeping most stock possible with the optimizations which will improve for real our experience.
Thanks
As you might know, all credits go to CyanogenMod Team.
Source Code
If you like my work, please consider a donation.
Reserve
Built-in root not working. Anyone else? I don't like flashing SuperSU if it has built-in CM root.
feed3 said:
Built-in root not working. Anyone else? I don't like flashing SuperSU if it has built-in CM root.
Click to expand...
Click to collapse
Please flash supersu. I have to see how to address this. Haven't found yet a suitable solution. Sometimes seems to work. Other times doesn't work.
Issue with the latest build
jgcaap said:
Reserve
Click to expand...
Click to collapse
I've Nexus 5, 16GB with TWRP 3.
While installing the latest build and latest slim gapps - I get an error saying there is not enough space in System and asks me to resize.
Can you please help?
Arijit.Ray81 said:
I've Nexus 5, 16GB with TWRP 3.
While installing the latest build and latest slim gapps - I get an error saying there is not enough space in System and asks me to resize.
Can you please help?
Click to expand...
Click to collapse
IT seems it is working with micro.
Could you please let me know the actual free space you have at system partition?
jgcaap said:
IT seems it is working with micro.
Could you please let me know the actual free space you have at system partition?
Click to expand...
Click to collapse
Not sure if the attachments will help.
jgcaap said:
IT seems it is working with micro.
Could you please let me know the actual free space you have at system partition?
Click to expand...
Click to collapse
Data on partition size
jgcaap said:
IT seems it is working with micro.
Could you please let me know the actual free space you have at system partition?
Click to expand...
Click to collapse
Not sure if you could go through my log file earlier
Arijit.Ray81 said:
Data on partition size
Click to expand...
Click to collapse
Interesting. i'll think a way. Thanks
jgcaap said:
Interesting. i'll think a way. Thanks
Click to expand...
Click to collapse
Thanks. I'll really look forward to a solution.
jgcaap said:
Interesting. i'll think a way. Thanks
Click to expand...
Click to collapse
Any idea what could be causing the issue? I wonder how the other ROMs along with mini GAPPS work.
I'm not sure if I'm doing anything wrong; or has TWRP 3 screwed up something?
Arijit.Ray81 said:
Any idea what could be causing the issue? I wonder how the other ROMs along with mini GAPPS work.
I'm not sure if I'm doing anything wrong; or has TWRP 3 screwed up something?
Click to expand...
Click to collapse
try with an older version and let me know. but i believe is because this one is odexed
jgcaap said:
try with an older version and let me know. but i believe is because this one is odexed
Click to expand...
Click to collapse
I did try with older gapps. All had the same issue.
Arijit.Ray81 said:
I did try with older gapps. All had the same issue.
Click to expand...
Click to collapse
Then definitely is space.
jgcaap said:
Then definitely is space.
Click to expand...
Click to collapse
Any idea how we can go about fixing the issue? I'd appreciate any help. I love your ROM and would like to stick to it.
Arijit.Ray81 said:
Any idea how we can go about fixing the issue? I'd appreciate any help. I love your ROM and would like to stick to it.
Click to expand...
Click to collapse
I guess that for this device either I don't fully odex or use smaller gaaps.
jgcaap said:
I guess that for this device either I don't fully odex or use smaller gaaps.
Click to expand...
Click to collapse
Let's try both ways... I'll be happy to test and help.
---------- Post added at 09:03 PM ---------- Previous post was at 09:02 PM ----------
jgcaap said:
I guess that for this device either I don't fully odex or use smaller gaaps.
Click to expand...
Click to collapse
If you're on whatsapp - add me - We can talk there.
jgcaap said:
I guess that for this device either I don't fully odex or use smaller gaaps.
Click to expand...
Click to collapse
Any luck with the fix?
Arijit.Ray81 said:
Any luck with the fix?
Click to expand...
Click to collapse
busy with exodus. i'll check tomorow.
Dirty Unicorns just updated sources to Marshmallow.
XDA: Dirty Unicorns ROM Updated to Marshmallow, Brings Lots of New Features.
http://www.xda-developers.com/dirty-unicorns-rom-updated-to-marshmallow-brings-lots-of-new-features/
Would be nice if someone could port and build for Onyx.
As far as I know, it's based on CM13.
Thanks
+1
I was literally just abut to make a thread about this
---------- Post added at 12:34 PM ---------- Previous post was at 12:34 PM ----------
Please devs
Officially I read that they had no plans to support it
I would look into maintaining it myself but my rig needs new parts. Otherwise with my laptop even compiling a kernel from source takes forever
RJDTWO said:
Officially I read that they had no plans to support it
I would look into maintaining it myself but my rig needs new parts. Otherwise with my laptop even compiling a kernel from source takes forever
Click to expand...
Click to collapse
If you intend to support it officially, they would probably let you use their build server to release builds.
Just guessing. If you're really interested in supporting DU, you can ask them
Sent from my OnePlus X using Tapatalk
Calvin2394 said:
If you intend to support it officially, they would probably let you use their build server to release builds.
Just guessing. If you're really interested in supporting DU, you can ask them
Sent from my OnePlus X using Tapatalk
Click to expand...
Click to collapse
I'll look into that and see what I can do then
@RJDTWO So what's up? Did you ask them if you can use their servers?
Calvin2394 said:
@RJDTWO So what's up? Did you ask them if you can use their servers?
Click to expand...
Click to collapse
Doesnt look like ill be able to unfortunately. However the dev working on Tamesek is working on an unofficial build.
RJDTWO said:
Doesnt look like ill be able to unfortunately. However the dev working on Tamesek is working on an unofficial build.
Click to expand...
Click to collapse
that would be @rohitporoli
Subhrajyoti Sen said:
that would be @rohitporoli
Click to expand...
Click to collapse
I've kept that aside for now! Having the same issue regarding server! :/
So well, I booted DU for onyx.
To my surprise, all basic functions are working. RIL is working flawless too.
What's broken :-
Selinux (Needs work)
Tristate keys (Will fix them)
Rest all is working as it should atleast in my case, I will make a thread and post the build when I fix the above two things.
Don't ask for links please. I won't post untill I fix the stuffs.
Vatsal said:
So well, I booted DU for onyx.
To my surprise, all basic functions are working. RIL is working flawless too.
What's broken :-
Selinux (Needs work)
Tristate keys (Will fix them)
Rest all is working as it should atleast in my case, I will make a thread and post the build when I fix the above two things.
Don't ask for links please. I won't post untill I fix the stuffs.
Click to expand...
Click to collapse
You´re awesome man! Thank you so much!
Vatsal said:
So well, I booted DU for onyx.
To my surprise, all basic functions are working. RIL is working flawless too.
What's broken :-
Selinux (Needs work)
Tristate keys (Will fix them)
Rest all is working as it should atleast in my case, I will make a thread and post the build when I fix the above two things.
Don't ask for links please. I won't post untill I fix the stuffs.
Click to expand...
Click to collapse
Oh sweet. Will they let you make this official? They wouldn't let me use their servers for releases
RJDTWO said:
Oh sweet. Will they let you make this official? They wouldn't let me use their servers for releases
Click to expand...
Click to collapse
No official sorry. I don't wish to apply for official.
Hi guys,
as LineageOS 15.1 is just around the corner and I had a few spare CPU cycles, here's the current build which I did as a 'code of honor'-member. Just flash with TWRP as usual, add gapps (stock are too big) and optionally root.
Watch out as the whole rom might still lack a few features.
Sources are on https://github.com/LineageOS
Credits to anyone who worked on them including intel for their buggy CPUs enabling me to build.
Build date: 2018-03-02
Download: https://go.stargazer.at/bacon
FAQs.:
Q: What patches did you include?
A: None. Pure LineageOS as it would come from the build server
Q: So this IS the official LineageOS rom?
A: In theory it's the same thing, but I am NOT a linageos developer
Q: What Gapps package did you use?
A: Nano. Stock is too big as it wouldn't fit on /system
Q: Support?
A: None officially. But ask - maybe someone has an idea.
Q: What works?
A: Phone rings, I'm able to answer and do calls, BT works, Wifi... annoying texts already arriving. I assume it's working.
Q: Bugs?
A: You tell.
Q: Is it complete?
A: I doubt it. Some translations are still missing. Keep in mind it's an early version of lineageOS
Q: Why did you build it?
A: Because I did not want to wait for the official release and live on the edge.
Q: Why does a girl build roms?
A: Short answer: because I can.
is the camera working? apparently that is the reason why the official build have been delayed
borzowsky said:
is the camera working? apparently that is the reason why the official build have been delayed
Click to expand...
Click to collapse
Honestly, I did not check yet as camera is not one of my basic needs. Will do so as soon as I get home.
If it does not work yet, I do not intend to fix too much stuff as I want to stay on the official sources. If there's a patch to cherrypick from gerrit, it's something we may talk about.
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Long live bacon
cb5264 said:
Camera does not work yet...
Click to expand...
Click to collapse
I noticed that your build has SELinux enforcing but this may be why the camera isn't working; something that still needs fixing.
cb5264 said:
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Click to expand...
Click to collapse
I've been keeping tabs on this every day and no one has touched it for weeks [emoji24] hopefully they just have code they're working on offline and just have to upload it and merge. Waiting is killing me though. Good to know it's getting close but probably will still wait since I'll probably do a full wipe once it's ready and don't want to do it twice.
Sent from my Nexus 7 using Tapatalk
remedya said:
I noticed that your build has SELinux enforcing but this may be why the camera isn't working; something that still needs fixing.
Click to expand...
Click to collapse
I doubt that it's SELinux. Looking at the logcat the problem root seems to be the HAL and that we should use the CAF stack. Besides that some clocks seem to be out of sync (mainly front camera). If it would be SELinux, logcat/dmesg would show.
Download doesnt work
I will fix it as I compile the next version.
cb5264 said:
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Click to expand...
Click to collapse
Some changes on 19 March.
Download link fixed btw
remedya said:
Some changes on 19 March.
Click to expand...
Click to collapse
Are these the changes needed to fulfill the LineageOS Device Support Requirement/camera recorder?
cb5264 said:
Download link fixed btw
Click to expand...
Click to collapse
Error 7
---------- Post added at 08:37 PM ---------- Previous post was at 08:19 PM ----------
Lol and now the download link is gone. Just stop. Wait for the official there is clearly a reason why its not been officially released yet.
First look at Build 2003 is really fine. Thanks for your hard work, Lady
Cam seems "two steps from hell" ...
https://review.lineageos.org/#/q/project:LineageOS/android_device_oneplus_bacon
interesting enough ?
The_Voice_70 said:
First look at Build 2003 is really fine. Thanks for your hard work, Lady
Cam seems "two steps from hell" ...
https://review.lineageos.org/#/q/project:LineageOS/android_device_oneplus_bacon
interesting enough ?
Click to expand...
Click to collapse
You had no problems flashing?
It's happening!
Sent from my A0001 using Tapatalk
TbagBaggins said:
You had no problems flashing?
Click to expand...
Click to collapse
Nope. No Problems.
The_Voice_70 said:
Nope. No Problems.
Click to expand...
Click to collapse
Im getting error 7. No other rom gives me error 7. Download link works on and off have tried installing twice same error.
Use latest official TWRP 3.2.1.0. No Problems with it. Error 7 seams to be old Recovery.
Download
https://sourceforge.net/projects/lineageos-on-leeco/files/twrp/zl1/
Changes
twrp-3.3.1-20190813-0-codeworkx-zl1.img
- upgraded to 3.3.1
- updated decryption blobs
- updated prebuilt kernel
twrp-3.3.0-0-20190427-codeworkx-zl1.img
- upgraded to android-9.0
- removed compatibility check
- removed twrp app check
- modified version string
- Fixed compatibility with older encryption variant
- fix restore of system/vendor when not using images
Sources
https://github.com/TeamWin/android_device_leeco_zl1/tree/android-9.0
https://github.com/lineageos/android_kernel_leeco_msm8996/tree/lineage-16.0
Thanks!
codeworkx said:
twrp-3.2.3-0-20180919-codeworkx-zl1.img is compatible with P.
Download
https://sourceforge.net/projects/lineageos-on-leeco/files/twrp/zl1/
Click to expand...
Click to collapse
Thanks man you really make my day with this, I can't wait to try this Rom.
Ramg77 said:
Thanks man you really make my day with this, I can't wait to try this Rom.
Click to expand...
Click to collapse
It has been removed, I guess its not finished and having it accessible was unintentional.
Did you download and install it?
tsongming said:
It has been removed, I guess its not finished and having it accessible was unintentional.
Did you download and install it?
Click to expand...
Click to collapse
It's just the folder but it's enough to know that we'll have official Lineage 16 and that's enough for me to cheer me up
Ramg77 said:
It's just the folder but it's enough to know that we'll have official Lineage 16 and that's enough for me to cheer me up
Click to expand...
Click to collapse
Ha ha, okay I was getting jealous!
---------- Post added at 03:09 PM ---------- Previous post was at 02:59 PM ----------
codeworkx said:
twrp-3.2.3-0-20180919-codeworkx-zl1.img is compatible with P.
Download
https://sourceforge.net/projects/lineageos-on-leeco/files/twrp/zl1/
Click to expand...
Click to collapse
Wow, Amazing job!
This new Twrp creates a vendor partition, without having to flash additional files. So I am assuming the the vendor partition created by a trembled rom and one created by your new version o Twrp are one in the same?
tsongming said:
Ha ha, okay I was getting jealous!
---------- Post added at 03:09 PM ---------- Previous post was at 02:59 PM ----------
Wow, Amazing job!
This new Twrp creates a vendor partition, without having to flash additional files. So I am assuming the the vendor partition created by a trembled rom and one created by your new version o Twrp are one in the same?
Click to expand...
Click to collapse
Twrp doesn't create anything.
It's the los 15.1 builds that do.
codeworkx said:
Twrp doesn't create anything.
It's the los 15.1 builds that do.
Click to expand...
Click to collapse
Yes, in my euphoric excitement, I became confused and misspoke.
I meant that there isn't a need to flash a partition files. Which of course you would had provided, if necessary. Doh!
You answered my question, Thank you.
failed to mount vendor
Ab20000 said:
failed to mount vendor
Click to expand...
Click to collapse
Restart twrp
D1stRU3T0R said:
Restart twrp
Click to expand...
Click to collapse
Still getting vendor partition error. Any other solutions?
I can mount system but not vendor. What am I doing wrong?
Vendor is only created if you flash LineageOS 15.1 or LineageOS 16.0. Do that and restart.
I have a question to which I have never received an answer. but how do I remove the annoying unlocking every time I go into recovery. I always have to turn off and turn on the screen.
Inviato dal mio LEX720 utilizzando Tapatalk
just to confirm, 3.2.3 is the latest twrp for the x720? Cause on the twrp app, it keeps saying failed to fetch data, been saying that for weeks now
GWARslave119 said:
just to confirm, 3.2.3 is the latest twrp for the x720? Cause on the twrp app, it keeps saying failed to fetch data, been saying that for weeks now
Click to expand...
Click to collapse
If you are using this recommended 9/19 Twrp, remember that its unofficial and that could be the reason you are getting the fetch error.
In my experience, that app works sometimes and sometimes it doesn't. But you should still be able to backups from within the OS.
tsongming said:
If you are using this recommended 9/19 Twrp, remember that its unofficial and that could be the reason you are getting the fetch error.
In my experience, that app works sometimes and sometimes it doesn't. But you should still be able to backups from within the OS.
Click to expand...
Click to collapse
Oh im not using this one, im still on 3.2.2
GWARslave119 said:
Oh im not using this one, im still on 3.2.2
Click to expand...
Click to collapse
If you are using trebled Oreo or Pie , you need to be on this TWRP. ( 9/19) If you are using anything else : use this Twrp: https://twrp.me/leeco/leecolepro3.html
The syncing part of that app rarely works. Regardless, of what you have had installed. To the best of my recollection, I was able to get it to work maybe 2 or 3 times over a two year period using every rom that came available. On the other hand, the Gapps app works
tsongming said:
If you are using trebled Oreo or Pie , you need to be on this TWRP. ( 9/19) If you are using anything else : use this Twrp: https://twrp.me/leeco/leecolepro3.html
The syncing part of that app rarely works. Regardless, of what you have had installed. To the best of my recollection, I was able to get it to work maybe 2 or 3 times over a two year period using every rom that came available. On the other hand, the Gapps app works
Click to expand...
Click to collapse
i dont think im on trebled oreo, not quite sure what that is though ive seen it around ;p im using the unsushifued bootlegger rom right now.
GWARslave119 said:
i dont think im on trebled oreo, not quite sure what that is though ive seen it around ;p im using the unsushifued bootlegger rom right now.
Click to expand...
Click to collapse
Okay, that is treble. You need to use this Twrp
I you go to the bottom of the Bootlegger Op (The Original Post aka first page) You will see that I recommended using this version of TWRP
tsongming said:
Okay, that is treble. You need to use this Twrp
I you go to the bottom of the Bootlegger Op (The Original Post aka first page) You will see that I recommended using this version of TWRP
Click to expand...
Click to collapse
alrighty i flashed it