NOTE 1: I DO NOT OWN THIS TUTORIAL, I JUST SHARE IT HERE IN ENGLISH BECAUSE PEOPLE MIGHT NEED IT. ORIGINAL: LINK.
NOTE 2: I AM NOT RESPONSIBLE IF YOU FAIL OR BRICK YOUR DEVICE, IT'S ALL UP TO YOU. IF YOU DECIDE TO CONTINUE THEN IT'S ALL YOUR FAULT IF YOU FAIL.
NOTE 3: THIS WORK ONLY WITH UPDATES FROM THE SAME BASE SO CHECK YOUR DEVICE.
Short note: Tested on my VTR-L29.
Short intro if you would like to read from my experience:
- Okay so there are many people complaining about B162 that is not updating apps via playstore so that kinda made me want to update my phone to the last B164 version. After a few minutes searching through the forums I found a tool to update my phone and I decided to try. I made all the steps and the phone rebooted and surprise: update has failed and also I got the beautiful 'your device has failed verification error'. Sounds scary,eh? Not at all because it did not affect my phone in any way but it pissed me off so I decided to browse even deeper and I found this tutorial which worked. I got it running with B164 and also got rid of that error. Life's fun, isn't it? lol
Tools you will need:
- Patience and coffee
- Your phone must be atleast 80% battery because it will take a while to finish the whole process
- Firmware Finder app ( you can download it from the playstore / apk from the web ..you choose )
Steps:
- Install the magic Firmware Finder app from playstore or your source
- Open it and you will notice three (3) bars on the left side of the app -> choose Settings
- Now you should see an option ' Use proxy for install ' -> activate the option and install the addon when it ask you to do it
- Return to the inital screen of the app and search for the latest firmware available ( for me it was B164 ). Make sure you use the full firmware. DO NOT USE OTA !
- Press on your firmware and choose ' get an update through proxy '
- Go to phone settings-> wifi -> long press your wifi network -> modify -> show advanced options -> proxy settings -> manual -> set the name as localhost and port as 8080 and then save.
- Go to settings -> updater -> check for new update. A new update should appear and it also should be the firmware you have chosed earlier in Firmware Finder app. Pay attention to the details so you won't screw things up. If the update matches with your firmware finder update package then proceed and press download.
- Once the download has started leave it till it gets ~5% and check for any errors . If everything works and is error free then you can pause the download.
- Remember I told you to pause the download? Well yea, you have to do it. Now go back to wifi settings @ your network, remove the proxy and save.
- Resume the update download
- When the download is finished the phone will verify the package and install it.
- Congrats mate, you did it !
I hope this will help people out with updates or failures.
I also got you a few screenshots that might clear things out.
Have fun using your P10 :highfive: .
09.01.2018 UPDATE FOR USERS THAT CAN JOIN THE OREO BETA BY COUNTRY USING FIRMWARE FINDER
Note 1: Your device might not boot. -> May lead to a factory reset using stock recovery. * it was not my case but it can happen*
Note 2: This might not work if your device was rebranded. Keep in mind that they use the IMEI to sign up for beta testing so your rebranded device might not be able to sign up for it.
Note 3: Do it at your own risk. Do not blame me if something goes wrong. This worked for me and a couple of people but it's not 100% sure that will work for anyone.
Note 4: Always backup your data!
We all know that they need B180 to get the beta access but even though I saw pictures of users that joined the program using B171. If you are using a higher version, as I did before (B179) there is no project available in beta app. Most of users are using B179 and B180 is not aproved because we are unlucky lol.
I managed to get a quick fix for that in order to join the beta that migh work for you aswell.
Follow these:
* you follow, you risk mate, not my fault if you mess up something*
1. Use Firmware Finder.
2. Set proxy to B164 (FullOTA-MF 2017.08.14) - do not forget to check for it..always check to be aproved mate!
3. Download and wait for it to install.
4. Boot the phone, clear all recent apps and get B171 via OTA ( NOT FIRMWARE FINDER, JUST CHECK FOR UPDATES ).
5. Download and wait for it to install x2 (B171 this time).
6. *If you already have the beta app installed, if not jump to next* Go to settings -> Beta app -> Clear all the data.
7. Sign in to huawei id (if not already).
8. Go to beta app and accept the conditions -> go to projects -> the beta project should be there, just sign up for it and wait for your request to be accepted!
9. Wait for further updates, since you are signed they might come.
10. *optional* Boot into stock recovery ( vol + and pwr ) and clear cache after the updates, that might help the phone to clear up some junk files used in the whole process.
I hope that this will help most of you that got into B179 before the beta testing.
Cheers :highfive:
Worsk perfectly on VTR-L09
I am happy to hear that !
Works great to bring VTR-L09C2B151 with Vodafone branding to 155. Thanks
will it work on rooted device? thanks
Might work if your recovery is stock. Not sure though, but your root will be gone after the update.
You can try but I can not confirm it will work.
Firmware Finder
I think you forgot to mention the "Check Firmware Access" if the firmware update is approve to install already, otherwise installation will fail after reboot. Also, I do download OTA only and not the full firmware package since I'm already in the latest version. Download full firmware package only if you're in much lower firmware version
_totep said:
I think you forgot to mention the "Check Firmware Access" if the firmware update is approve to install already, otherwise installation will fail after reboot. Also, I do download OTA only and not the full firmware package since I'm already in the latest version. Download full firmware package only if you're in much lower firmware version
Click to expand...
Click to collapse
I'm already on B166, and I just wanna download and install full package of B166 again because before I've just done a quick and not full update, will this work or will I brick my phone? Thanks.
And will it also work if I wanna downgrade my firmware? instead of update?
Firicel69 said:
NOTE 1: I DO NOT OWN THIS TUTORIAL, I JUST SHARE IT HERE IN ENGLISH BECAUSE PEOPLE MIGHT NEED IT. ORIGINAL: LINK.
NOTE 2: I AM NOT RESPONSIBLE IF YOU FAIL OR BRICK YOUR DEVICE, IT'S ALL UP TO YOU. IF YOU DECIDE TO CONTINUE THEN IT'S ALL YOUR FAULT IF YOU FAIL.
NOTE 3: THIS WORK ONLY WITH UPDATES FROM THE SAME BASE SO CHECK YOUR DEVICE.
Short note: Tested on my VTR-L29.
Short intro if you would like to read from my experience:
- Okay so there are many people complaining about B162 that is not updating apps via playstore so that kinda made me want to update my phone to the last B164 version. After a few minutes searching through the forums I found a tool to update my phone and I decided to try. I made all the steps and the phone rebooted and surprise: update has failed and also I got the beautiful 'your device has failed verification error'. Sounds scary,eh? Not at all because it did not affect my phone in any way but it pissed me off so I decided to browse even deeper and I found this tutorial which worked. I got it running with B164 and also got rid of that error. Life's fun, isn't it? lol
Tools you will need:
- Patience and coffee
- Your phone must be atleast 80% battery because it will take a while to finish the whole process
- Firmware Finder app ( you can download it from the playstore / apk from the web ..you choose )
Steps:
- Install the magic Firmware Finder app from playstore or your source
- Open it and you will notice three (3) bars on the left side of the app -> choose Settings
- Now you should see an option ' Use proxy for install ' -> activate the option and install the addon when it ask you to do it
- Return to the inital screen of the app and search for the latest firmware available ( for me it was B164 ). Make sure you use the full firmware. DO NOT USE OTA !
- Press on your firmware and choose ' get an update through proxy '
- Go to phone settings-> wifi -> long press your wifi network -> modify -> show advanced options -> proxy settings -> manual -> set the name as localhost and port as 8080 and then save.
- Go to settings -> updater -> check for new update. A new update should appear and it also should be the firmware you have chosed earlier in Firmware Finder app. Pay attention to the details so you won't screw things up. If the update matches with your firmware finder update package then proceed and press download.
- Once the download has started leave it till it gets ~5% and check for any errors . If everything works and is error free then you can pause the download.
- Remember I told you to pause the download? Well yea, you have to do it. Now go back to wifi settings @ your network, remove the proxy and save.
- Resume the update download
- When the download is finished the phone will verify the package and install it.
- Congrats mate, you did it !
I hope this will help people out with updates or failures.
I also got you a few screenshots that might clear things out.
Have fun using your P10 :highfive: .
Click to expand...
Click to collapse
Thank you for the guide. Followed all steps. Once downloaded it says it has failed to authorise and it will delete the package. Can't seem to get around this. Any ideas?
You sure you got the right package?
Firicel69 said:
You sure you got the right package?
Click to expand...
Click to collapse
Thanks for swift reply.
Yes, I go to the Firmware Finder app and find the full update version I want, switch on the proxy inside app, change settings for WiFi (localhost 8080), go to settings, it tells me there's an update.
Checked the size of file - it's 2.8GB instead of 2.2GB. The button I press says "Quick Update" (blue button). It downloads the update. I get further than 5%, pause download, remove the WiFi proxy settings (localhost 8080), get 100% but...
...says it is unauthorised and will be deleted.
(EDIT: Screenshot added below)
For some reason I still think that there is something wrong with your package. I had no such issue with mine. I'm not sure what to do about exactly but you can try to ask for help in the original thread I provided in the main post.
Hi guys. So I have the the VNS-L31C432B391 and I want to upgrate the P9 Lite to B397. Can I do it without any problem?
I got the same error as @wickdaman with my P10 L09. Downloads the entire thing then fails to authenticate and deletes the update.
Before downloading the new firmware click on 'IMEI check'. This will tell you if the firmware is installable on your device.
None of the B171 above versions (witch is my current on VTR-L09B432) is suitable for the installation, checked with/without IMEI and by trying to install B179 for example that lead to the same outcome, install failed, downloaded firmware deleted. I think this issue has something to do with EMUI 5.1 ID safeguard that I tried to downgrade without success but anyway, any of versions with number below mine (B171) can be used and I have installed them successfully, B162 i think and after restart system checks for newer versions on its own and finds B171 and naturally I am back to beginning.
Sorry for my English, it's not my native language, I did the best I could. Hope this helps people.
Hello, newb here.
Will this get the updates directly from Huawei while skipping the provider? My provider (Fido aka Rogers) is horrible for bringing out updates and are full of bloat wear.
longview41 said:
I got the same error as @wickdaman with my P10 L09. Downloads the entire thing then fails to authenticate and deletes the update.
Click to expand...
Click to collapse
Checked VKY-L09 C432B177 update today. Allows me to download it now, although the model number has now changed to include a B at the beginning - BC432B177.
No idea if this is meant to be the same model number or if it's a locked network version or not. I'll find out soon and write an update.
wickdaman said:
Checked VKY-L09 C432B177 update today. Allows me to download it now, although the model number has now changed to include a B at the beginning - BC432B177.
No idea if this is meant to be the same model number or if it's a locked network version or not. I'll find out soon and write an update.
Click to expand...
Click to collapse
I did find the answer to my problem is that FF doesn't support EMUI5+
If you are on EMUI4 or less it works, but something in EMUI5 breaks the ability to update in this manner.
Related
The definite guide to rooting Samsung Galaxy J3(2016) SM-J320FN & FRP Locked Bootloop
As first I have to say, I had to create a thread in Q&A because of the low rank, but I am sure this can be moved to the J3 section as there are many questions on how to gain root access to this device. This guide can work on the SM-J320F model as well, but it hasn't been tested on other models, so don't try it !
Lets start :
Dont forget to Backup all your data before the process !!!
1. Tick USB Debugging and OEM Unlock in Developer Mode (OEM has to be ticked to unlock the bootloader)
2. Connect to PC with USB Cable and open Odin
3. Power off and reboot into Download Mode (VOL.DOWN+HOME+POWER)
4. Add twrp.zip to AP tab
5. Untick Auto-Reboot and Start
6. Wait to finish
7. When it's finished hold (VOL.DOWN+VOL.UP+HOME+POWER) to Power Off
8. Load into TWRP Mode (VOL.UP+HOME+POWER)
9. In TWRP first go to the Wipe Tab, check Cache and Data and click Wipe
10. Copy SuperSU into internal memory from your PC
11. Go back to TWRP and select Install, select the SuperSU from the internal memory and click install without ticking anything, then reboot
12. Wait for the phone to reboot, it may boot-loop a few times, and it boots slowly but dont interrupt the process !
13. From there on, check the root status by downloading Root Checker from PlayStore
KEEP OEM-UNLOCK ON ALL THE TIME, IF YOU DONT WANNA END UP WITH A BRICKED DEVICE(CUSTOM BINARY WAS BLOCKED BY FRP LOCK)!!!
If that happens, here is an official guide from the Samsung Kies Support Page :
IMPORTANT: You may need your device model name, S/N number, or IMEI number in order to proceed. This information can be found on the label underneath your device battery.
WARNING: This process permanently deletes all personal information from the device. The information will not be recoverable if you proceed with this process.
1. Open Kies 3 and click Tools > Firmware Upgrade and Initialization.
2. Enter your device Model name and click OK.
3. Enter the device S / N number and click OK.
4. Kies 3 will verify that the feature is available for your device. If the feature is available, click OK to continue.
5. The firmware version is displayed along with a note that the information on your device will be permanently deleted during this process. Click OK to continue.
6. Follow the steps to prepare your device for emergency recovery. Mark the checkbox next to I have read all of the above information. Select whether you agree to share this update with Samsung. Connect your device to Kies when you have activated the download mode. When your device is in download mode and connected to Kies 3, the Start upgrade button is available. Click Start upgrade to reinstall the firmware.
7. Touch Create backup to create a copy of selected items before proceeding. Touch Skip backup to proceed without backing up any items.
8. Kies 3 will download and prepare your system to update the firmware. This process can take some time. The time will vary based on your network and computer capabilities.
9. Respond to any security warnings about installing software.
10. The progress screen is shown during the upgrade process. The process will take several minutes to complete. Do not disconnect your device, turn the device off, or turn off your computer during this process.
11. Click OK when the upgrade is finished.
Therefore I provide you all the needed files to do this :
How to root SM-J320FN.rar
Works like a charm on J320FN.
I signed up just to say, after hours of trying different guides, accidentally factory resetting once or twice, and getting my phone stuck in a boot loop, this method worked. BUT it did factory reset my phone, but that's fine I've everything backed up and it wont take long to get it back. Maybe I pressed something I shouldn't have.
Some info on my phone in case it helps anyone in a similar position to how I was:
At one point I installed stock firmware from to get my phone out of the boot loop, I can't link it but if you google "J320FNXXU0APB4_J320FNO2C0APC1_O2C" (WITH quotes) you should find the page.
After doing that:
Android version: 5.1.1
Model number: SM-J320FN
Kernel version: 3.10.65-7225942 (Sun Feb 14 2016)
Build no: LMY47V.J320FNXXU0APB4
Baseband version: J320FNXXU0APB5
I hope I typed all that right. Thank you so much!!
have anyone tried on j320v?
kekambas18 said:
have anyone tried on j320v?
Click to expand...
Click to collapse
Going to attempt that right now wish me luck.
---------- Post added at 08:06 PM ---------- Previous post was at 07:09 PM ----------
And it didn't work. Not suprised, but I at least tried.
GN9166 said:
4. Add twrp.zip to AP tab
10. Copy SuperSU into internal memory from your PC
Click to expand...
Click to collapse
Hey, why this guide doesn't mention that I have to download something. It's definitely NOT definitive! What is twrp.zip? Where do I take it from? What is AP tab? Where exactly do I copy SuperSU? What will happen in the download mode?
Problems in Root J320AZ
My name is Dario Lobos. I am working as a gardener and I am making a little application in my phone. I don't have computer so I did it in Java n-ide. I started with a Samsung core prime but the screen was broken and I did change it and the technicians broke it and gave me an Samsung s320. Android 6 (api23) and after that the java n-ide don't compiles the permits that I am requesting in the manifest so I can't grant permissions to my apk. Parallel of it the phone always show a notice unauthorized actions have been made please restart the phone to undo the unauthorized actions. And the lookout said message root access detected. I wrote Samsung without any positive answer. No technical assistance at all. But the roots checkers says that I have no root in my phone. Now I am trying to do a root. But I don't know if someone have a hidden root access in my phone. A page suggest Framaroot and you suggest kingroot. I don't want to store all my phone in their server to root it. Does any program that don't access to all the data to root the phone?. I am writing you since you have more experience to request you if it is in your possibilities. Also to ask you about prompt root commands. Where I can find info about that. A suggestion to solve my problem. My simple all is here
....github.com/DarioLobos/sistemariego
....github.com/tranleduy2000/javaide/issues/163
....1drv.ms/u/s!Asr3Ewn45KOLtGOqDkoMq20A-hbc?e=24Wwx3
The system don't let me put url since I am new add please http...
Well thank you in advance and any help is wellcome
Regards,
Dario Lobos
Adding more information to what I did to try to find a an answer. I tried to root with Frama root 1.9.3 and the installation only request me access to the camera and after installed the programs showed a banner that said can't root your device.
Today I downloaded from firmware.mobi some zip and img files but I already I couldn't learn how to use them properly.
I am trying to avoid the exploids system because maybe is a hacker in the middle. Always I am trying to root w/o SIM card and with Wi-Fi off. So I think that kingroot and kingoroot are not useful for my.
I am trying to buy an old desktop computer as an alternative.
Well any suggestion is usefull and wellcome.
Before of all of that I did two factory reset in recovery mode.
Then I installed an apk Dev Tools (trinea) and one menu request me developer permit in accesibility setting. The phone started to change the color of the screen and the outside padding start to flashing red. Then was open a setting menu and the language was changed suddenly to Japanese or Korean while the screen was lighting like receiving knoks. I turned of the phone and restarted and hopefully I remembered the position in settings to change the language.
After that I had to use an apk repair system and fix Android and the screen get better but the padding outside still flashing in red ones in a while.
Also where added plenty sha certificates (settings user certificates) like system certificates
Go daddy
VeriSign
Some governments (Turkish, Spain, Japan, Germany, Holland, and more)
The Catholic religion with 6 certificates called
Quo Basis
And much more.
So I did another factory reset recovery mode. And the screen problem disappeared and the certificates that I turned off manually firt too (All) but the root alert in the look out and the security notice didn't disappeared.
Today I wanted to print your forum page and the phone put error. Only put error in your forum page.
Other thing that I had to to just after the unpackage the restored Android is disable the setup and transfer. Because I think that is this apk that were using to access and modify my files and grants permissions.
I installed the TWRP application but said the phone have no root.
Today I opened the developer option in settings and turned to on the OEM option to unlock the boot loader but instead of put a banner saying that all data will be erased put a banner saying that the device protection will be not work and didn't do the reboot or nothing more that put this dialog.
Dario Lobos
great, unlocken/rooten worked here. But after that, the mobile became unusable. All google apps complain no connection is available. I cannot update google play store, cannot update other google apps like youtube, or install any app now.
And perhaps it does not have anything to do with the mentioned process, but before I started the process, I made sure all nessacary file were on the sd card. But now I have finished wiping the data / cache from the recovery and all files on the sd card are gone.
I cannot login to google photos to see if the apps are backupped because every google app complains no internet connection is available.
So yes, rooting/unlocking worked, but that's the only thing that worked here. I now got a useless Samsung J3 2016...
I need assistant trying to root my J320FN, which I mistakenly wipe some backed up recovery file now, I can not get through with the rooting and I can get back to forma phone setting am locked up , samsung phone not coming up again please what can I do ?
GN9166 said:
The definite guide to rooting Samsung Galaxy J3(2016) SM-J320FN & FRP Locked Bootloop
As first I have to say, I had to create a thread in Q&A because of the low rank, but I am sure this can be moved to the J3 section as there are many questions on how to gain root access to this device. This guide can work on the SM-J320F model as well, but it hasn't been tested on other models, so don't try it !
Lets start :
Dont forget to Backup all your data before the process !!!
1. Tick USB Debugging and OEM Unlock in Developer Mode (OEM has to be ticked to unlock the bootloader)
2. Connect to PC with USB Cable and open Odin
3. Power off and reboot into Download Mode (VOL.DOWN+HOME+POWER)
4. Add twrp.zip to AP tab
5. Untick Auto-Reboot and Start
6. Wait to finish
7. When it's finished hold (VOL.DOWN+VOL.UP+HOME+POWER) to Power Off
8. Load into TWRP Mode (VOL.UP+HOME+POWER)
9. In TWRP first go to the Wipe Tab, check Cache and Data and click Wipe
10. Copy SuperSU into internal memory from your PC
11. Go back to TWRP and select Install, select the SuperSU from the internal memory and click install without ticking anything, then reboot
12. Wait for the phone to reboot, it may boot-loop a few times, and it boots slowly but dont interrupt the process !
13. From there on, check the root status by downloading Root Checker from PlayStore
KEEP OEM-UNLOCK ON ALL THE TIME, IF YOU DONT WANNA END UP WITH A BRICKED DEVICE(CUSTOM BINARY WAS BLOCKED BY FRP LOCK)!!!
If that happens, here is an official guide from the Samsung Kies Support Page :
IMPORTANT: You may need your device model name, S/N number, or IMEI number in order to proceed. This information can be found on the label underneath your device battery.
WARNING: This process permanently deletes all personal information from the device. The information will not be recoverable if you proceed with this process.
1. Open Kies 3 and click Tools > Firmware Upgrade and Initialization.
2. Enter your device Model name and click OK.
3. Enter the device S / N number and click OK.
4. Kies 3 will verify that the feature is available for your device. If the feature is available, click OK to continue.
5. The firmware version is displayed along with a note that the information on your device will be permanently deleted during this process. Click OK to continue.
6. Follow the steps to prepare your device for emergency recovery. Mark the checkbox next to I have read all of the above information. Select whether you agree to share this update with Samsung. Connect your device to Kies when you have activated the download mode. When your device is in download mode and connected to Kies 3, the Start upgrade button is available. Click Start upgrade to reinstall the firmware.
7. Touch Create backup to create a copy of selected items before proceeding. Touch Skip backup to proceed without backing up any items.
8. Kies 3 will download and prepare your system to update the firmware. This process can take some time. The time will vary based on your network and computer capabilities.
9. Respond to any security warnings about installing software.
10. The progress screen is shown during the upgrade process. The process will take several minutes to complete. Do not disconnect your device, turn the device off, or turn off your computer during this process.
11. Click OK when the upgrade is finished.
Therefore I provide you all the needed files to do this :
How to root SM-J320FN.rar
Click to expand...
Click to collapse
The link says "the key is invalid"
I tried to change the Chinese Firmware to Global firmware to (Meizu Pro 7) and now I have a problem.
I followed this guide on this web:
chinahandys .net (I can't copy the link here since I have a new user
and so I deleted the file "boot.img"
I also couldn't open the Update.zip file with Winrar or another archive program.
then, I tried to do this :
"10. In FlashFire, select the small plus icon at the bottom right and select “Flash ZIP or OTA”. Select the “update.zip” file and confirm the pop-up with the tick at the top right"
but I couldn't find the “update.zip” file there.
finally, I tried to open the update.zip by pressing "Update".
since then my phone won't start.
The only thing i can do is pressing the "plus" button and another button below which will lead to me to a screen of Updating the system. when I try to do it's wrong because "firmware not found".
My phone is stock on the screen "flyme".
please help me!! I just bought this phone
(danhdongufixer) he is on Facebook.... He single handily brought my pro 7 plus back from the dead get ahold of him he's wizard .
I had same problem and this guy fixed my phone get in touch with him because there is nothing else you can do meizu left a lot of us hanging for over 3 months and no help . Good luck
You maybe don't use the good Firmware
maorsah said:
I tried to change the Chinese Firmware to Global firmware to (Meizu Pro 7) and now I have a problem.
I followed this guide on this web:
chinahandys .net (I can't copy the link here since I have a new user
and so I deleted the file "boot.img"
I also couldn't open the Update.zip file with Winrar or another archive program.
then, I tried to do this :
"10. In FlashFire, select the small plus icon at the bottom right and select “Flash ZIP or OTA”. Select the “update.zip” file and confirm the pop-up with the tick at the top right"
but I couldn't find the “update.zip” file there.
finally, I tried to open the update.zip by pressing "Update".
since then my phone won't start.
The only thing i can do is pressing the "plus" button and another button below which will lead to me to a screen of Updating the system. when I try to do it's wrong because "firmware not found".
My phone is stock on the screen "flyme".
please help me!! I just bought this phone
Click to expand...
Click to collapse
Hi,
For 3 month, I hope you have find the solution. If you don't, here is mine :
I had the same problème on my phone.
I couldn't reinstall it, I think the version that I downloaded wasn't compatible with the "Chinese" version of my mobile.
You need to find the good firmware !
Could you try with this chinese firmware : MEIZU PRO7 Standard Version -Flyme6.1.3.2A-7.0
It's worked on my phone.
So,
Press and hold the volume up and power button until the screen goes on recovery mode.
Connect the device to the laptop or PC, you can open the device. You will see an empty partition named recovery.
Now copy the downloaded firmware of your phone and place it in the recovery partition. Just copy update.zip to recovery partition.
Now in the phone select update firmware and clear data and press next.
The phone will reboot and install the firmware.
Wait, wait, wait 15mn be patient.
tell me if it's working on your phone.
excuse me for my poor English !
Math32 said:
Hi,
For 3 month, I hope you have find the solution. If you don't, here is mine :
I had the same problème on my phone.
I couldn't reinstall it, I think the version that I downloaded wasn't compatible with the "Chinese" version of my mobile.
You need to find the good firmware !
Could you try with this chinese firmware : MEIZU PRO7 Standard Version -Flyme6.1.3.2A-7.0
It's worked on my phone.
So,Press and hold the volume up and power button until the screen goes on recovery mode.
Connect the device to the laptop or PC, you can open the device. You will see an empty partition named recovery.
Now copy the downloaded firmware of your phone and place it in the recovery partition. Just copy update.zip to recovery partition. Now in the phone select update firmware and clear data and press next.
The phone will reboot and install the firmware.
Wait, wait, wait 15mn be patient.
tell me if it's working on your phone.
Click to expand...
Click to collapse
Hello!
Was everything, such as google playstore and english language, still working on you phone after you updated the firmware?
I was also wondering if theres need to backup the IMEI somewhere?
Im currently running a modified verision of 6.1.3.2A which doesnt have all the features for the 2nd display and hence looking for an upgrade.
Leone1 said:
Hello!
Was everything, such as google playstore and english language, still working on you phone after you updated the firmware?
I was also wondering if theres need to backup the IMEI somewhere?
Im currently running a modified verision of 6.1.3.2A which doesnt have all the features for the 2nd display and hence looking for an upgrade.
Click to expand...
Click to collapse
I used this chinese version less than 10mn. I would advise you to install the G firmware !
I didn't install the playstore (too thing in chinese in this firmware) that's why after running the version 6.1.3.2A, i used this tutorial :
https://forum.xda-developers.com/showpost.php?p=75297402&postcount=70
"Download the firmware Flyme 6.1.3.2G from here
http://www.flymeos.com/firmwarelist?modelId=88&type=1
after you can do the instructions in video
https://www.youtube.com/watch?v=aDp6oZL4Wx4 "
Be careful when you install superSU to do the same thing as in the video. I don't do the same than on the vidéo that's why i need to reinstall the chinese firmware. After the installation i wait 15mn and my phone stays on Flyme. i restart it and it worked for installing busybox and flashfire.
I wish you bon courage !
Math32 said:
I used this chinese version less than 10mn. I would advise you to install the G firmware !
I didn't install the playstore (too thing in chinese in this firmware) that's why after running the version 6.1.3.2A, i used this tutorial :
https://forum.xda-developers.com/showpost.php?p=75297402&postcount=70
"Download the firmware Flyme 6.1.3.2G from here
http://www.flymeos.com/firmwarelist?modelId=88&type=1
after you can do the instructions in video
https://www.youtube.com/watch?v=aDp6oZL4Wx4 "
Be careful when you install superSU to do the same thing as in the video. I don't do the same than on the vidéo that's why i need to reinstall the chinese firmware. After the installation i wait 15mn and my phone stays on Flyme. i restart it and it worked for installing busybox and flashfire.
I wish you bon courage !
Click to expand...
Click to collapse
Ah ok, so you only used it to be able to flash the global rom on?
Ive read multiple places that its not possible to update from A to G, thats why i was thinking about going to the 7.0.0.0A ROM instead. The shop i bought it from (CECT, who are not very well informed at all) told me it would brick the phone to go to G from A, my phone is apparently not intended for global sale thats why they make their own version and flashes it on...
So now im just looking for someone who can confirm that updating to the A-rom wont remove google play or english.
EDIT: I have the Helio P25 model
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.
Sometimes you may not find firmware of your device in firmware finder application.
Someone with the same device can upload a firmware in FF by simply sharing OTA link. This is very easy and useful to everyone out there using same model mobile.
Below are the instructions, I have tried them and working fine.
1. Whenever you get official OTA update prompt, do not start downloading it. Instead open Firmware Finder app.
2. In firmware finder, left side menu click on "Share Firmware".
3. Enae VPN as asked in prompt.
4. Go to updates again, and just search for updates 2-3 times.
5. That's it. It will automatically send OTA link to Firmware Finder app and they will update there in next 1 hour time.
6. You can just disconnect VPN, and download update as it is.
Hi, everyone, I recently got an old demo Wing and decided to try seeing if I could remove the software restrictions (charge limit, etc). I originally intended to use it as a media device, but after successfully flashing retail firmware found that it could be used as an actual phone! I pieced this together using a bunch of posts and guides for various phones, but figured I'd share what worked for me here. I've only tested the unlocked Korean firmware on my unit, though others have supposedly used Verizon or T-Mobile firmware.
REQUIREMENTS:
Android Debug Bridge (ADB)
LG Mobile Driver (select universal)
LGUP terminal flash
Firmware - I used the Korean unlocked linked here, but in theory any KDZ for the Wing should work.
Before starting, uninstall the retail mode app and sign out of any google accounts on the device.
REMOVING DEMO MODE:
NOTE: This section should probably work on most recent LG demo devices. If it works for you, please let me know!
Step 1: Install the LG mobile driver on your computer.
Step 2: Extract the contents of the ADB .zip file.
Step 3: Power on the phone and enable developer mode. It's the same as any other phone (go to Settings > About > Software Info and tap on "Build Number" until it says "You are now a developer!), however you may be prompted for a password. The default password is L310MC570G.
Step 4: In the developer options, enable USB debugging.
Step 5: Connect the phone to your computer. Make sure that it’s set to “charge only” and not “media sync” or anything else in the notification. It should prompt you to allow your computer to access the phone for debugging when you connect it.
Step 6: On your computer, open a terminal in the ADB folder. Type ".\adb.exe devices" (no quotatations) and the phone should show up in there. If that works, type ".\adb.exe shell"
Step 7: Enter the command "am start -S com.android.settings/.Settings\$DeviceAdminSettingsActivity" to open the Device Administrators menu. Uncheck Retail Mode.
Step 8: Enter the command "pm uninstall -k --user 0 com.lge.retailmode" to remove retail mode.
Step 9: Restart the phone and you should be good to go. This doesn't remove the charging limit or cellular restrictions, but it removes most of the annoying demo stuff.
FLASHING:
NOTE: This is for the LG Wing only. Some devices like the Velvet may work, but others (such as the V60) reportedly brick if you try to flash stock firmware. Attempt at your own risk.
Step 1: Install the LG mobile driver on your computer if you haven't already.
Step 2: Extract the LGUP flash utility and place it in your C:\ directory. Ensure the filepath is C:\LGUP-FLASH-Utility\[Contents of folder], otherwise it will not work.
Step 3: Copy your firmware (.kdz) file to the LGUP-FLASH-Utility folder.
Step 4: Put your phone into download mode. To do this, power off the phone and connect it to your computer while holding the volume up button.
Step 5: Run LGUP-FLASH-Utility.exe.
Step 6: Pick option 1. Find the COM port number the phone is using- the program and documentation should indicate which you need.
Step 7: After finding this, press enter to return to the menu and select option 2.
Step 8: Enter the port number again. Don't type "COM," just the port number itself.
Step 9: Follow the prompts to select the proper file. You'll need to type the full name.
Step 10: If all goes well, the program should start flashing the firmware. Leave it be until the program says it is complete, even if it appears to boot into Android. It will take approximately 5-10 minutes.
Step 11: If all goes well, you should now have a much more usable LG Wing. Disconnect and enjoy!
What works:
-SIM card/modem (data, call and text all work fine)
-Full battery capacity
-Unless it's in the other section, it's safe to assume it probably works!
What doesn't work:
-Fingerprint sensor
Other notes:
-The Korean firmware is what I flashed, and it works fine. However, this post seems to indicate that you can flash the stock Verizon firmware and then T-Mobile firmware. I haven't tested this.
-There's an error when starting the phone, but it doesn't affect its functionality.
-At times, I've had SMS/calling stop working, but toggling airplane mode on and off seems to fix it.
Edit: Changed firmware link to the exact file I used (F100N11b_00_COM_KR_OP_0119.kdz)
Edit 2: I've been using this phone for around 2 months now as my daily driver with no major issues since flashing the stock firmware
Ok but how can i uninstall the demo mode app at the first place? The guide is interesting but i guess you should include that as well
Thankyou-_- said:
Ok but how can i uninstall the demo mode app at the first place? The guide is interesting but i guess you should include that as well
Click to expand...
Click to collapse
There's a bunch of guides online you can follow, but I've added how to do this to the post.
So i was successfully able to remove the demo mode, but when i try to flash using LGUP (after doing all the steps) it shows "Flash done" but nothing changes
Any idea what's wrong? I downloaded everything from this guide
Thanks in advance
Thankyou-_- said:
So i was successfully able to remove the demo mode, but when i try to flash using LGUP (after doing all the steps) it shows "Flash done" but nothing changes
Any idea what's wrong? I downloaded everything from this guide
Thanks in advance
Click to expand...
Click to collapse
Double check that your files are extracted in the proper place. The LGUP-FLASH-Utility folder should be in your C: directory and the files should be inside it. It should look something like this (I'm using Windows 11, but the folder layout should be the same).
gd243 said:
Double check that your files are extracted in the proper place. The LGUP-FLASH-Utility folder should be in your C: directory and the files should be inside it. It should look something like this (I'm using Windows 11, but the folder layout should be the same).
View attachment 5421117View attachment 5421115
Click to expand...
Click to collapse
Now I'm facing another problem
"Dll isn't installed properly..."
Any ideas what should I do?
I tried to uninstall and install again but no luck
I really appreciate your help
Thankyou-_- said:
Now I'm facing another problem
"Dll isn't installed properly..."
Any ideas what should I do?
I tried to uninstall and install again but no luck
I really appreciate your help
Click to expand...
Click to collapse
Odd. Looks like you've done everything right otherwise. I'm not sure what could be causing the DLL error- try completely reinstalling everything (driver, redownload + install the flash utilty, etc), or even try it on a different computer. You might have to experiment a bit and change a few things to see what works.
gd243 said:
I used the Korean unlocked linked here
Click to expand...
Click to collapse
There are three types of firmware for three korean cellular networks: KTF, SKT and LGT. Which one did you choose?
georgiadiy said:
There are three types of firmware for three korean cellular networks: KTF, SKT and LGT. Which one did you choose?
Click to expand...
Click to collapse
The exact firmware file name was F100N11b_00_COM_KR_OP_0119.kdz
Starting now the download but amazing post!
I don't have a Demo wing *yet* but there's a chance at getting some at work
If someone wants to try this, go for it, as this worked on a Google Pixel 6 Pro Android 12 that was MDM locked
If you can enable USB debugging, enable it, plug into your computer, use ADB to disable Google Play Services, go to user profiles and create a second profile, use that profile, enable Play Services and the device works with no MDM/Demo restrictions
Yo, thanks for putting this together man! This is huge! I was able to flash mine and get it working. I figured out you can get an IMEI in the service menu (for development purposes only) I'm on the Korean firmware that you listed in the guide, but I want to try and get it on the TMobile firmware since that's the carrier I have and I want to see if it will have wifi calling. I wasn't able to flash the TMobile file the other day but I will try a few other firmwares and see what I can do. I noticed on the Korean one, you can't update through settings and I'm not sure why. This thing will be totally legit if I can get it on the newest TMobile firmware with wifi calling and OTA updates for when the wing gets android 11. The last thing we need is to figure out how to get the fingerprint scanner working!
mikewolski said:
Yo, thanks for putting this together man! This is huge! I was able to flash mine and get it working. I figured out you can get an IMEI in the service menu (for development purposes only) I'm on the Korean firmware that you listed in the guide, but I want to try and get it on the TMobile firmware since that's the carrier I have and I want to see if it will have wifi calling. I wasn't able to flash the TMobile file the other day but I will try a few other firmwares and see what I can do. I noticed on the Korean one, you can't update through settings and I'm not sure why. This thing will be totally legit if I can get it on the newest TMobile firmware with wifi calling and OTA updates for when the wing gets android 11. The last thing we need is to figure out how to get the fingerprint scanner working!
Click to expand...
Click to collapse
Let me know if you make any progress! I've also been trying to get T-Mobile on mine, but so far no luck.
I saw someone said something about resetting the finger print sensor to have it work. It turns on on mine but doesn't scan. I can't find the post now about "resetting it". Its like the discussion threads on this topic were deleted
KaptinBoxxi said:
I saw someone said something about resetting the finger print sensor to have it work. It turns on on mine but doesn't scan. I can't find the post now about "resetting it". Its like the discussion threads on this topic were deleted
Click to expand...
Click to collapse
I think you're referring to this post.
OP says that you can go to the hidden menu (#*462633*#100#) and go to SVC Menu > Fingerprint > Enable. The thing is, that doesn't exist on the Wing. The only thing I see in SVC Menu is Handprint > HandID Logging on/off. Because that setting only deals with logging, it obviously doesn't enable the optical fingerprint scanner. After poking around in the service menu some more, I haven't been able to find any other way of enabling it.
The only thing of some significance OP mentioned was a way to test the the fingerprint scanner. You can go to Device Test > SAAT > Service Menu - Manual Test > Optical FingerPrint Test and go through the test from there. Every time I run it, the test fails and I get the following results:
Exposure Time: PASS
Bad Block: FAIL
Finger Effect Area: FAIL
Signal: PASS
Noise: FAIL
M-Facotry: PASS
Data Save: FAIL
OP said that if it fails after enabling it that means it worked. That doesn't make much sense though.
Hopefully some day soon we'll be able to get this sensor working.
twocans said:
I think you're referring to this post.
OP says that you can go to the hidden menu (#*462633*#100#) and go to SVC Menu > Fingerprint > Enable. The thing is, that doesn't exist on the Wing. The only thing I see in SVC Menu is Handprint > HandID Logging on/off. Because that setting only deals with logging, it obviously doesn't enable the optical fingerprint scanner. After poking around in the service menu some more, I haven't been able to find any other way of enabling it.
The only thing of some significance OP mentioned was a way to test the the fingerprint scanner. You can go to Device Test > SAAT > Service Menu - Manual Test > Optical FingerPrint Test and go through the test from there. Every time I run it, the test fails and I get the following results:
Exposure Time: PASS
Bad Block: FAIL
Finger Effect Area: FAIL
Signal: PASS
Noise: FAIL
M-Facotry: PASS
Data Save: FAIL
OP said that if it fails after enabling it that means it worked. That doesn't make much sense though.
Hopefully some day soon we'll be able to get this sensor working.
Click to expand...
Click to collapse
Its entirely possible we don't have the fingerprint scanner at all. Demo devices, they sometimes leave hardware out of them. Samsungs are usually missing modems
Other thing I'm confused by... My IMEI is 0. I've seen people say, including this post, that mobile data and such work after doing this
KaptinBoxxi said:
Its entirely possible we don't have the fingerprint scanner at all. Demo devices, they sometimes leave hardware out of them. Samsungs are usually missing modems
Other thing I'm confused by... My IMEI is 0. I've seen people say, including this post, that mobile data and such work after doing this
Click to expand...
Click to collapse
That is very true too. But based on the fact that the demo units have the functioning 5G modem and the full 256GB of storage, it would honestly surprise me if they didn’t have a functioning scanner.
As for the IMEI, I’m assuming those people have changed the default IMEI and generated a new one. Based on other discussion threads on XDA, it appears to be frowned upon / illegal in some countries to discuss how to change the IMEI. All I can say is that it is possible, just hidden. If you’ve gotten to the point that you’re modifying a demo device like this, you’re probably the type that’s willing to poke around menus you’re not supposed to be in, so it shouldn’t be too hard to figure it out.
twocans said:
That is very true too. But based on the fact that the demo units have the functioning 5G modem and the full 256GB of storage, it would honestly surprise me if they didn’t have a functioning scanner.
As for the IMEI, I’m assuming those people have changed the default IMEI and generated a new one. Based on other discussion threads on XDA, it appears to be frowned upon / illegal in some countries to discuss how to change the IMEI. All I can say is that it is possible, just hidden. If you’ve gotten to the point that you’re modifying a demo device like this, you’re probably the type that’s willing to poke around menus you’re not supposed to be in, so it shouldn’t be too hard to figure it out.
Click to expand...
Click to collapse
Oh I've poked around lol but even this tutorial states "data worked after flashing" which mine didn't, which is why I asked
I know with normal LGUp Tool, you can do PDM and modify the IMEI, or you can do ChipErase via LGUp_CMD but I can't figure out how to do optional commands with lg cmd since it doesn't really tell you and no one online seems to have a tutorial for anymore than the basics of
Code:
lgup_cmd com DLL KDZ
options go at the end, but doesn't seem to matter what I put there
Hey, thanks so much for putting this together! I'm running into an issue where it says to do a ChipErase D/L. Any ideas?
firefurby said:
Hey, thanks so much for putting this together! I'm running into an issue where it says to do a ChipErase D/L. Any ideas?
View attachment 5455955
Click to expand...
Click to collapse
This is due to the firmware you're flashing. For the demo conversion, you have to do the Korean firmware first, then to do something like Verizon, you need the LGUP 1.16 tool from my other post, use ChipErase in that tool and it'll flash just fine. You have to wipe the partition that checks variation, which is what chip erase is for