Related
When I will Install Cyanogen Mod 11, I forgot copy cyanogen mod & google apps on my storage then I try adb sideload but it did'nt work.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
Click to expand...
Click to collapse
beside that, I was update the adb & sdk too...
What should I do next if the file cyanogenmod & gapps still on my PC/Laptop?
1.Download ICS firmware from internet.
2.Flash it via flashtool
3.Reboot your device,
Copy CM and gapps
4.Reboot to recovery
5.Install CM and Gapps again
Hit thanx
Sent from my ST25a using XDA Premium 4 mobile app
CWM Recovery v6.0.3.7
* Warning : You will lose your mobile warranty.
* I am not responsible if you brick your devices, or your SD cards is dead, or you getting fired because the alarm app failed.
* Please research about features included in this Kernel before flashing it! You are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
For Help: https://www.facebook.com/groups/GTS7262/
Functionality (Navigation, Selection buttons):
Up - Volume Up
Down - Volume Down
Select - Home, Power
Back - Home's Right, Power (Click on ++++Go Back++++)
Changelog: CWM Recovery v6.0.3.6
1) Initial release of CWM Recovery v6.0.3.6
2) Modified recovery.fstab
3) New graphics
4) Fixed ramdisk, tmp, sbin directories
Changelog: CWM Recovery v6.0.3.6 v2
* CWM Recovery v6.0.3.6 +
1) Compiled along with updated kernel source
2) Minor visible Graphics and font changes
3) Added Power button functionality
4) Install flashable zip from Internal Storage
5) Backup, Restore, Delete from Internal Storage
6) Misc changes in Mounts and Storage
Changelog: CWM Recovery v6.0.3.7
* CWM Recovery v6.0.3.6 v2 +
1) Initial release of CWM Recovery v6.0.3.7
2) Compiled from updated Cyanogenmod 10.1.3 sources
3) Better visible Graphics and font changes
4) Fixed Power button behavior
5) Fix issue where android device manager, etc, dont actually wipe data.
--wipe_data issues via /cache/recovery/command will now completely format data.
6) All other manual wipe commands will preserve data on /data/media.
7) There is another mounts/storage option that will do a true data format.
Installation: Follow flashing/installing TWRP/CWM instructions from this link: https://bit.ly/2NllOo9
Download(s):
UPDATE CWM Recovery v6.0.3.7: https://www.up-4ever.org/2qho0to81lp5
Contributors:
ItsAnilSingh
Release Date: 2015-04-22
Update Date: 2015-05-19
Update: Version v2 is now out.. download and flash.. don't forget to say thanks.
Thread title amended
Please remember that the author / owner can amend the settings / text of the thread.
GO ADVANCED and you can amend the title.
Nevertheless, I have done that this time
Update: CWM Recovery v6.0.3.7 is now out.. download and flash it via odin.. don't forget to say thanks.
Thanks i will download test and get back to you
---------- Post added at 07:49 AM ---------- Previous post was at 07:33 AM ----------
It works great thanks need to install custom firmware now
Thanks
man please send-me tree
i am seeing blank white screen on rebooting to recovery,both through key combo and adb......plz help me out
these recoveries dont work every time iflash them it takes me to samsung's recovery
can anyone tell why?
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any doubts about rooting
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are lot of Guides Available for Rooting Grand 2. But I'm sharing this for the people who don't have a pc and want their phone rooted safe.
I have tried this several times, and I'm sure it is safe. Eventhough there is a chance of soft brick.
Note: This Guide is only for Samsung Galaxy Grand 2 SM-G7102 which is running on Kitkat 4.4.2 stock Rom. You can try on other devices on your own risk.
*--------------------------*
DOWNLOADS
For Method - 1
Kingroot
SuperSu-Me
For Method - 2
Flashify
Rashr (optional)
SuperSu v2.52 Beta
Recoveries
CWM by Mukulsoni
TWRP by Aapav
Philz Touch by Ali.filth
*--------------------------*
Method - 1
1. Download Kingroot App and Root your phone with it.
(Kingroot is not a safe app and it is highly vulnerable, Hackers can easily hack your phone when using Kingroot as superuser app. Eventhough with kingroot you can easily root your phone without pc)
Download Kingroot
Don't know how to root with Kingroot?
*Download and install the KingRoot app as you would do with any normal app.
"Launch the KingRoot app from the app drawer.
*A 'Try to Root' button will appear at the bottom of the screen. Just tap this button and let the rooting process complete.
*After the device is rooted, a success message will appear on the screen.
Done!
Click to expand...
Click to collapse
2. Reboot (important)
3. Download 'Supersu-me' App.
See this thread to know more
or Buy Pro Version
Buy or Google it [emoji14] it's against xda rules providing free download link for a premium app.
note: SuperSu-me Please App Developed by XDA Devolopers. They decided as a team to take on the challenge and come out with this script that will completely remove all of the KingRoot applications and put SuperSU on our device.
all credits goes to them.
4. Install SuperSu-Me.. open it, it will ask for root permission, Grant it.
5. Then press Blue Button
It will take a while. The app will automatically remove Kingroot file from our phone and replace Kingroot with supersu.
6. Reboot
Enjoy having root privileges
Note: if the Kingroot app still remains after all these steps, uninstall it manually.
In some cases, you may lose root privileges after using supersume. In such cases, open SuperSu(not Supersu-me) settings> full unroot. Then Repeat all the steps again.
After doing all these steps, you can use flashify app to flash custom Recoveries and other stuffs. But Read some guides before using these apps
Flashify : https://play.google.com/store/apps/details?id=com.cgollner.flashify
Rashr (An alternate app for flashing Recoveries and zip files as same as flashify) :-
Play store link : https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Note : These apps could brick your device if you use it wrong. so careful.
- RECOVERIES -
CWM
TWRP
Philz Touch
I personally recommend CWM for beginners.
*-------------------------------*
Method - 2
This method is more complicated
Note - I haven't tried this step on Grand 2 kitkat. But tried on several other devices. every time it worked. it should work on grand 2 stock firmware too.
1. Download Kingroot App and Root your phone with it.
2. Download Flashify from playstore
Link: https://play.google.com/store/apps/details?id=com.cgollner.flashify
3. Download a recovery (links are mentioned above)
*I recommend twrp for this method.
4. Download Supersu 2.52 flashable zip
link: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
5. Open flashify, it will ask for root permission. Grant it.
We can flash recovery with flashify using 2 methods. they are
(i) flashing Zip file method
(ii)flashing img file method
only try 2nd method if 1st fails
first we try (i) flashing Zip file method
'Boot Image, Recovery Image and Zip File' are the three main options you find in flashify.
Select Zip file option > choose a file > find Recovery.zip(recovery flashable zip file ) from the folder you downloaded and select it > Yup! (ofcourse Yup! is an option lol) > Copy First > Reboot.
if you have done all steps properly, it will automatically reboot to recovery and flash zip file which will replace the stock recovery.
some times Zip file method fails, in such case we can try (ii)flashing img file method.
first of all go to file manager and find the recovery zip file you downloaded, extract it. inside the extracted folder, you will find a file named recovery.img
open flashify > Recovery Image > Choose a file (browse and find recovery.img file you extracted and then select it) > Normal Android Way > Yup! > Reboot
Phone will reboot.
after recovery has flashed using flashify, open flashify again > touch the 3dot menu on the top right corner > select Reboot Recovery. phone will reboot to recovery. from there select Install zip and flash recovery.zip again (because recoveries that flashed through flashify are not at all stable, sometimes it fails to boot manually using power+volumeup key combinations. so you should flash recovery, from recovery using flashable zip file) see some guides how to flash zip file using recovery.
6. Reboot to Recovery
You can boot to recovery using power+volumeup key combinations.
OR
open flashify> 3dot menu > Reboot Recovery
7. Install Zip > BETA-SuperSU-v2.52.zip (supersu file you have dowloaded first)
it will take a while
Supersu Beta 2.52 version have scripts included to remove Kingroot automatically. Flashing BETA-SuperSU-v2.52.zip will automatically remove Kingroot and replaces with supersu
After flashing finished, reboot the phone and open Supersu. See whether it working properly. if no error message shown, You have rooted your phone successfully.
Post your doubts and comments here.
hit thanks button if helped.
Nice post but I am already use this thanx dear
Sent from my SM-G7102 using Tapatalk
JAMESAMEES said:
Nice post but I am already use this thanx dear
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
hit thanks button then ??
yub
JitDevHacker said:
hit thanks button then
Click to expand...
Click to collapse
you deserve it
digitman xxx said:
you deserve it
Click to expand...
Click to collapse
lol
you are distributing apk for a paid app,distributing cracked apk for paid apps is strictly prohibited on xda.
Requesting you to remove it asap.
neonkat said:
you are distributing apk for a paid app,distributing cracked apk for paid apps is strictly prohibited on xda.
Requesting you to remove it asap.
Click to expand...
Click to collapse
Removed
EDIT: Method 2 added to post #1
JitDevHacker said:
EDIT: Method 2 added to post #1
Click to expand...
Click to collapse
Rooting your device through king root is safe and easy one
aryalmuskan17 said:
Rooting your device through king root is safe and easy one
Click to expand...
Click to collapse
not safe,that makes your device vulnerable.
aryalmuskan17 said:
Rooting your device through king root is safe and easy one
Click to expand...
Click to collapse
Easy to Root without pc. but vulnerable. flash supersu v2.52 beta as long as possible after rooted with Kingroot.
neonkat said:
not safe,that makes your device vulnerable.
Click to expand...
Click to collapse
what is vulnerable??
aryalmuskan17 said:
what is vulnerable??
Click to expand...
Click to collapse
Kingroot is Vulnerable. you should replace Kingroot with supersu
JitDevHacker said:
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any doubts about rooting
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
There are lot of Guides Available for Rooting Grand 2. But I'm sharing this for the people who don't have a pc and want their phone rooted safe.
I have tried this several times, and I'm sure it is safe. Eventhough there is a chance of soft brick.
Note: This Guide is only for Samsung Galaxy Grand 2 SM-G7102 which is running on Kitkat 4.4.2 stock Rom. You can try on other devices on your own risk.
*--------------------------*
DOWNLOADS
For Method - 1
Kingroot
SuperSu-Me
For Method - 2
Flashify
Rashr (optional)
SuperSu v2.52 Beta
Recoveries
CWM by Mukulsoni
TWRP by Aapav
Philz Touch by Ali.filth
*--------------------------*
Method - 1
1. Download Kingroot App and Root your phone with it.
(Kingroot is not a safe app and it is highly vulnerable, Hackers can easily hack your phone when using Kingroot as superuser app. Eventhough with kingroot you can easily root your phone without pc)
Download Kingroot
2. Reboot (important)
3. Download 'Supersu-me' App.
See this thread to know more
or Buy Pro Version
Buy or Google it [emoji14] it's against xda rules providing free download link for a premium app.
note: SuperSu-me Please App Developed by XDA Devolopers. They decided as a team to take on the challenge and come out with this script that will completely remove all of the KingRoot applications and put SuperSU on our device.
all credits goes to them.
4. Install SuperSu-Me.. open it, it will ask for root permission, Grant it.
5. Then press Blue Button
It will take a while. The app will automatically remove Kingroot file from our phone and replace Kingroot with supersu.
6. Reboot
Enjoy having root privileges
Note: if the Kingroot app still remains after all these steps, uninstall it manually.
In some cases, you may lose root privileges after using supersume. In such cases, open SuperSu(not Supersu-me) settings> full unroot. Then Repeat all the steps again.
After doing all these steps, you can use flashify app to flash custom Recoveries and other stuffs. But Read some guides before using these apps
Flashify : https://play.google.com/store/apps/details?id=com.cgollner.flashify
Rashr (An alternate app for flashing Recoveries and zip files as same as flashify) :-
Play store link : https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Note : These apps could brick your device if you use it wrong. so careful.
- RECOVERIES -
CWM
TWRP
Philz Touch
I personally recommend CWM for beginners.
*-------------------------------*
Method - 2
This method is more complicated
Note - I haven't tried this step on Grand 2 kitkat. But tried on several other devices. every time it worked. it should work on grand 2 stock firmware too.
1. Download Kingroot App and Root your phone with it.
2. Download Flashify from playstore
Link: https://play.google.com/store/apps/details?id=com.cgollner.flashify
3. Download a recovery (links are mentioned above)
*I recommend twrp for this method.
4. Download Supersu 2.52 flashable zip
link: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
5. Open flashify, it will ask for root permission. Grant it.
We can flash recovery with flashify using 2 methods. they are
(i) flashing Zip file method
(ii)flashing img file method
only try 2nd method if 1st fails
first we try (i) flashing Zip file method
'Boot Image, Recovery Image and Zip File' are the three main options you find in flashify.
Select Zip file option > choose a file > find Recovery.zip(recovery flashable zip file ) from the folder you downloaded and select it > Yup! (ofcourse Yup! is an option lol) > Copy First > Reboot.
if you have done all steps properly, it will automatically reboot to recovery and flash zip file which will replace the stock recovery.
some times Zip file method fails, in such case we can try (ii)flashing img file method.
first of all go to file manager and find the recovery zip file you downloaded, extract it. inside the extracted folder, you will find a file named recovery.img
open flashify > Recovery Image > Choose a file (browse and find recovery.img file you extracted and then select it) > Normal Android Way > Yup! > Reboot
Phone will reboot.
after recovery has flashed using flashify, open flashify again > touch the 3dot menu on the top right corner > select Reboot Recovery. phone will reboot to recovery. from there select Install zip and flash recovery.zip again (because recoveries that flashed through flashify are not at all stable, sometimes it fails to boot manually using power+volumeup key combinations. so you should flash recovery, from recovery using flashable zip file) see some guides how to flash zip file using recovery.
6. Reboot to Recovery
You can boot to recovery using power+volumeup key combinations.
OR
open flashify> 3dot menu > Reboot Recovery
7. Install Zip > BETA-SuperSU-v2.52.zip (supersu file you have dowloaded first)
it will take a while
Supersu Beta 2.52 version have scripts included to remove Kingroot automatically. Flashing BETA-SuperSU-v2.52.zip will automatically remove Kingroot and replaces with supersu
After flashing finished, reboot the phone and open Supersu. See whether it working properly. if no error message shown, You have rooted your phone successfully.
Post your doubts and comments here.
hit thanks button if helped.
Click to expand...
Click to collapse
I have successfully Root. But run SuperSU to uninstall the failed kingroot
I installed 4.6.5 kingroot
Drthanh77 said:
I have successfully Root. But run SuperSU to uninstall the failed kingroot
I installed 4.6.5 kingroot
Click to expand...
Click to collapse
Try Method 2. Flash SuperSu v2.52 using recovery
@Drthanh77 Don't qoute post #1 please. but feel free to ask your doubts.
Sent from my SM-G7102 using Tapatalk
JitDevHacker said:
@Drthanh77 Don't qoute post #1 please. but feel free to ask your doubts.
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
Thanks You verry much
despite a successful installation with SuperSU-v2.55.zip. But SuperSU-v2.55 remain inactive and not removed by Kingroot
Drthanh77 said:
Thanks You verry much
despite a successful installation with SuperSU-v2.55.zip. But SuperSU-v2.55 remain inactive and not removed by Kingroot
Click to expand...
Click to collapse
Use supersu-me
Sent from my SM-G7102 using Tapatalk
How
---------- Post added at 09:00 PM ---------- Previous post was at 08:58 PM ----------
I got a message to update su binary after I installed super sume, what could be wrong?
If u have problem with supersu. Delete and remove root from kingroot and then flash the supersu zip
Boot Logo Changer - Works for PIE and OREO - No mods needed to my original post
Change the boot image (NOT the bootanimation) that shows BEFORE the boot animation.
22 June 2020: Version 2
Found tar app to be corrupted. Changed tar app and minor mod to install script.
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this zip file
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
This has only been tested on the Note FE (SM-N935/DS).
If in doubt, check to see if your UP_PARAM partition is /dev/block/sda10.
There are programs on the Play Store that can show the partitions, there names and other info.
This app does make a backup of the original UP_PARAM partition and stores it on your /sdcard as UP_PARAM.bak.
Running this app multiple times will not overwrite the original UP_PARAM.bak
MAKE SURE YOUR SDCARD IS MOUNTED WHEN YOU GET INTO TWRP or CWM.
(Have NOT tested in CWM as I have TWRP installed).
Many thanks to @hanspampel from Android-Hilfe for the original script.
I originally used this for my Tab A 7.0.
To change the logo (.jpg file), replace the logo.jpg in the .zip file with your own .jpg file.
Remember the original Galaxy Note FE (SM-N935/DS) logo.jpg is 1073 x 1464.
DO NOT make the your logo.jpg file too big. I would keep the file size under 250K.
Samsung reduced the size of the logo.jpg file to fill a little over 1/2 the screen. You cannot display anything above the top line in the logo.jpg.
See how I changed my logo.jpg below.
/* Installation */
Steps to install:
- Reboot into recovery
- Select Install from recovery menu
- Select NoteFE-chng-logo.zip
- Follow recovery install prompts
- Reboot and enjoy!
If you need a restore script, use the attached NoteFE-chng-logo-restore.zip
gcrutchr said:
Boot Logo Changer
Change the boot image (NOT the bootanimation) that shows BEFORE the boot animation.
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this zip file
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
This has only been tested on the Note FE (SM-N935/DS).
If in doubt, check to see if your UP_PARAM partition is /dev/block/sda10.
There are programs on the Play Store that can show the partitions, there names and other info.
This app does make a backup of the original UP_PARAM partition and stores it on your /sdcard as UP_PARAM.bak.
Running this app multiple times will not overwrite the original UP_PARAM.bak
MAKE SURE YOUR SDCARD IS MOUNTED WHEN YOU GET INTO TWRP or CWM.
(Have NOT tested in CWM as I have TWRP installed).
Many thanks to @hanspampel from Android-Hilfe for the original script.
I originally used this for my Tab A 7.0.
To change the logo (.jpg file), replace the logo.jpg in the .zip file with your own .jpg file.
Remember the original Galaxy Note FE (SM-N935/DS) logo.jpg is 1073 x 1464.
DO NOT make the your logo.jpg file too big. I would keep the file size under 250K.
Samsung reduced the size of the logo.jpg file to fill a little over 1/2 the screen. You cannot display anything above the top line in the logo.jpg.
See how I changed my logo.jpg below.
/* Installation */
Steps to install:
- Reboot into recovery
- Select Install from recovery menu
- Select NoteFE-chng-logo.zip
- Follow recovery install prompts
- Reboot and enjoy!
If you need a restore script, use the attached NoteFE-chng-logo-restore.zip
Click to expand...
Click to collapse
you can make picture Heart like box NOTE FE? thanks hehe
Asror said:
you can make picture Heart like box NOTE FE? thanks hehe
Click to expand...
Click to collapse
First of all, please to not copy the entire "LONG" post when replying. Just a couple of lines will suffice.
Secondly, I am not a graphic artist. You would need to find someone versed in graphic design to replicate the Note FE 'Heart'.
Is there any way to change boot logo with adb commands without root privileges for Note FE (N935F)?
mephistooo2 said:
Is there any way to change boot logo with adb commands without root privileges for Note FE (N935F)?
Click to expand...
Click to collapse
You do not need root. You DO need a custom recovery like TWRP or CWM. The installation takes place in recovery.
Check Post #1 for PIE update.
Can you share video tutorial for this mod? I confused
Sent from my SM-N935F using XDA-Developers Legacy app
Asror said:
Can you share video tutorial for this mod? I confused
Sent from my SM-N935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Uh...video tutorial?
This is very simple to use.
1. Download .zip file
2. Replace logo.jpg with your own logo.jpg. Make sure it has same dimensions as sample in .zip file
3. Copy .zip to phone
4. Reboot into recovery
5. Install .zip file
6. Reboot phone
7. Voila!! You have customized boot logo!
gcrutchr said:
Uh...video tutorial?
This is very simple to use.
1. Download .zip file
2. Replace logo.jpg with your own logo.jpg. Make sure it has same dimensions as sample in .zip file
3. Copy .zip to phone
4. Reboot into recovery
5. Install .zip file
6. Reboot phone
7. Voila!! You have customized boot logo!
Click to expand...
Click to collapse
I must rooted my phone? Install from TWRP?
Sent from my SM-N935F using XDA-Developers Legacy app
Asror said:
I must rooted my phone? Install from TWRP?
Sent from my SM-N935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes
It doesn't work on the note 7.
It doesn't work on note 7
Hi guys MY PHONE GALAXY NOTE FE SM-N935F DS
TWRP INSTALL ZIP BUT MY PHONE SOFT BRICK !!!!
I made my own logo, 200kb in size. And I got the decision right . And did zip with es File Manager. And I loaded it with TWRP, but the device crashed . Why do you think I made a mistake?
Bu damı gelcadı başımıza said:
Hi guys MY PHONE GALAXY NOTE FE SM-N935F DS
TWRP INSTALL ZIP BUT MY PHONE SOFT BRICK !!!!
I made my own logo, 200kb in size. And I got the decision right . And did zip with es File Manager. And I loaded it with TWRP, but the device crashed . Why do you think I made a mistake?
Click to expand...
Click to collapse
Sorry, there is a problem with the internal tar app. I just discovered it today. I will have a fix tomorrow.
gcrutchr said:
Sorry, there is a problem with the internal tar app. I just discovered it today. I will have a fix tomorrow.
Click to expand...
Click to collapse
Files updated...see Post #1
Very good
Works fine on my SM-N935F, Thanks ! :good:
Features.
* Based on official Nougat S228 Release
* Replaced Boot Logo
* Should Works both for (K6 Note) ( K53a48) and K6 Plus K53b36 (K6 Plus not tested).
Requirements:
* Lenovo K6 Note (K53a48) or Lenovo K6 Plus (K53b36)
* Installed Custom Recovery TWRP.
* Time and patience
nstructions
* Download the zip and put it on internal or external sd card( if you have one)
* Boot into TWRP Recovery
* Create Backup of your ROM.
* Select Install zip.
* Choose the zip you downloaded, and wait till the flashing finishes.
* After installation the device will boot and reboot, this is normal.
* Finish the setup and enjoy the phone.
* For Root Flash magisk.zip from recovery
Changelog
google phone , google Messages , pixel lanchur and brigle (https://github.com/amirzaidi/launcher3/releases v3.7) , xmlpak_module_2_7,cm file manejer , vlc player It was added
thank you : adilrenzu ,TechGenius
rom+magisk:https://drive.google.com/drive/folders/1WOimdH3lHrbPxLs3S4l1Z7Fk6ydgFvRM?usp=sharing
Screenshots: https://i.hizliresim.com/RD2oP6.jpg
https://i.hizliresim.com/pnlBWm.jpg
https://i.hizliresim.com/k6mnWA.jpg
Downloads as a bin file not a zip file.
How do you get the zip file?
Sent from my [device_name] using XDA-Developers Legacy app
Sniperboy1 said:
Downloads as a bin file not a zip file.
How do you get the zip file?
Click to expand...
Click to collapse
not correct please check again
pardusx said:
not correct please check again
Click to expand...
Click to collapse
is this rom working fine on k6 note, have any one tested this rom
It works great on k53a48. K6 note
Sent from my [device_name] using XDA-Developers Legacy app