Features.
* Based on official Nougat S228 Release
* Replaced Boot Logo
* Should Works both for (K6 Note) ( K53a48) and K6 Plus K53b36 (K6 Plus not tested).
Requirements:
* Lenovo K6 Note (K53a48) or Lenovo K6 Plus (K53b36)
* Installed Custom Recovery TWRP.
* Time and patience
nstructions
* Download the zip and put it on internal or external sd card( if you have one)
* Boot into TWRP Recovery
* Create Backup of your ROM.
* Select Install zip.
* Choose the zip you downloaded, and wait till the flashing finishes.
* After installation the device will boot and reboot, this is normal.
* Finish the setup and enjoy the phone.
* For Root Flash magisk.zip from recovery
Changelog
google phone , google Messages , pixel lanchur and brigle (https://github.com/amirzaidi/launcher3/releases v3.7) , xmlpak_module_2_7,cm file manejer , vlc player It was added
thank you : adilrenzu ,TechGenius
rom+magisk:https://drive.google.com/drive/folders/1WOimdH3lHrbPxLs3S4l1Z7Fk6ydgFvRM?usp=sharing
Screenshots: https://i.hizliresim.com/RD2oP6.jpg
https://i.hizliresim.com/pnlBWm.jpg
https://i.hizliresim.com/k6mnWA.jpg
Downloads as a bin file not a zip file.
How do you get the zip file?
Sent from my [device_name] using XDA-Developers Legacy app
Sniperboy1 said:
Downloads as a bin file not a zip file.
How do you get the zip file?
Click to expand...
Click to collapse
not correct please check again
pardusx said:
not correct please check again
Click to expand...
Click to collapse
is this rom working fine on k6 note, have any one tested this rom
It works great on k53a48. K6 note
Sent from my [device_name] using XDA-Developers Legacy app
Related
hi guys
download the zip below and flash it through cwm
or
extract the zip and use the root explorer and paste the files in respective folder
change the permission like
* * x
* x x
* x x
reboot your device and njoy the new boot animation and bootsound
i am afraid to use CWM because of i didn't have the cwm zip file. Can you post the procedure to use CWM? thanks in advance
Moved to Themes & Apps.
info
Srika said:
hi guys
download the zip below and flash it through cwm
or
extract the zip and use the root explorer and paste the files in respective folder
change the permission like
* * x
* x x
* x x
reboot your device and njoy the new boot animation and bootsound
Click to expand...
Click to collapse
pls more info about it and screenshot
valerik1989 said:
pls more info about it and screenshot
Click to expand...
Click to collapse
i´ve just downloaded it, and it´s the classic galaxy nexus bootanimation.
When I will Install Cyanogen Mod 11, I forgot copy cyanogen mod & google apps on my storage then I try adb sideload but it did'nt work.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
Click to expand...
Click to collapse
beside that, I was update the adb & sdk too...
What should I do next if the file cyanogenmod & gapps still on my PC/Laptop?
1.Download ICS firmware from internet.
2.Flash it via flashtool
3.Reboot your device,
Copy CM and gapps
4.Reboot to recovery
5.Install CM and Gapps again
Hit thanx
Sent from my ST25a using XDA Premium 4 mobile app
Coolpad Note 3 and lite are now officially supported by DualBootPatcher
Steps to use DualBootPatcher :-
# Downlad and install latest DualBootPatcher
apk from here
https://dbp.noobdev.io/
# Open it -> Go to roms in option
Grant all the permission,set the kernal
and update the ramdisk in primary rom.
# Go to settings and install boot ui.
# Now go to patch zip file -> Add flashable zip
# Select the rom.zip , googleapps.zip ,
patches.zip , addons.zip which you want to
use as secondary rom.
Select your device , data slot , (ext sd slot not
tested).
And apply patch.
# After patch completes install all the zip files
you have patched from twrp.
# If u want to use inapp flasher of
DualBootPatcher,
flash this zip before u use the app.
https://mega.nz/#!xhgQERbL!5UEPeMbbHU9kxLBmWLpUpsosRk4lGmtr0S3pWgkbdeU
#Note : works only if your rom supports init.d or su.d
# After the flash completes, hit reboot ==>> u
will be in the second rom.
# To switch rom :- Methods(any one works )
1. Using boot ui :u get option to switch rom during reboot
2. Select the rom in the App and reboot.
3. Install the boot.img in internal -> mutiboot folder from recovery and reboot
# If something goes wrong :-
Go to recovery -> install boot.img of primary
rom.
Note : 1. Not all the roms are tested.
Do At Your Own Risk
2. Note 3 plus also added but not tested
those who are interested can test and
coment here
CREDITS:-
#Chenxialong : For the incredible app
@Uday Hegde (For this Guide)
@kuberrocks96 (personally tested on Coolpad Note 3 Lite)
UPDATE : WORKING ON COOLPAD NOTE 3 , LITE AND PLUS
Working On Coolpad Note 3 as well
Note 3 plus try..
Well got interested...did the steps all...
And given all permissions...
When I try to install ROM as secondary (tried cm 12.1) while installing rom I got error saying unable to symblink and other as failed to extract data file to /data...any idea how to fix this...
Thanks in advance
File uploaded for reference crash log and a screenshot..
RaghuStar said:
Well got interested...did the steps all...
And given all permissions...
When I try to install ROM as secondary (tried cm 12.1) while installing rom I got error saying unable to symblink and other as failed to extract data file to /data...any idea how to fix this...
Thanks in advance
File uploaded for reference crash log and a screenshot..
Click to expand...
Click to collapse
did u tried to flash from recovery..?
Uday Hegde said:
did u tried to flash from recovery..?
Click to expand...
Click to collapse
Oh well no..flashed it from the app...as secondary ROM..
And I was able successfully boot android lollipop stockrom and Nougat Resurrection remix custom ROM as dual..I had no problem with that...and for RR ROM I selected extsd slot...so basically I could install in SD card...but failed in other slots..(slot 1.2.3 or secondary did not work for me.) And I did not try in data...
RaghuStar said:
Oh well no..flashed it from the app...as secondary ROM..
And I was able successfully boot android lollipop stockrom and Nougat Resurrection remix custom ROM as dual..I had no problem with that...and for RR ROM I selected extsd slot...so basically I could install in SD card...but failed in other slots..(slot 1.2.3 or secondary did not work for me.) And I did not try in data...
Click to expand...
Click to collapse
It is bcoz
Secondary slot is of system partition
and other 3 slots are of cache partition
as there is not enough space in all these 4 slots,it wont work.
And data slot is working for all roms.Extsd slot is working only for some roms as I tested.
And it is better to use twrp to flash.
no probleam if ur rom supports init.d (just flash the fix)otherwise u may face an assue of in switching rom,need to flash boot image of secondary rom manually.
Uday Hegde said:
It is bcoz
Secondary slot is of system partition
and other 3 slots are of cache partition
as there is not enough space in all these 4 slots,it wont work.
And data slot is working for all roms.Extsd slot is working only for some roms as I tested.
And it is better to use twrp to flash.
no probleam if ur rom supports init.d (just flash the fix)otherwise u may face an assue of in switching rom,need to flash boot image of secondary rom manually.
Click to expand...
Click to collapse
Well twarp is for primary ROM right!! How can I flash it for secondary ROM??? Is their any option for that...because if I want to flash gapps for my second ROM..all I did was first patching the ROM selecting same slot in which my RR ROM is present and then flashing the file by logging into the primary ROM..
RaghuStar said:
Well twarp is for primary ROM right!! How can I flash it for secondary ROM??? Is their any option for that...because if I want to flash gapps for my second ROM..all I did was first patching the ROM selecting same slot in which my RR ROM is present and then flashing the file by logging into the primary ROM..
Click to expand...
Click to collapse
what the app does is it inserts some binary to handle the process of flashing into the zip files.
patch the zip files such as gapps or patches to the rom and give the same id as the rom,it will be flashed to ur rom(to which ro has that id).
and flashing the patched zip files from recovery will not touch the primary rom.binary will create create a chroot environment at /data/local/multiboot/slot-id/ and everything will be flashed into it...
Uday Hegde said:
what the app does is it inserts some binary to handle the process of flashing into the zip files.
patch the zip files such as gapps or patches to the rom and give the same id as the rom,it will be flashed to ur rom(to which ro has that id).
and flashing the patched zip files from recovery will not touch the primary rom.binary will create create a chroot environment at /data/local/multiboot/slot-id/ and everything will be flashed into it...
Click to expand...
Click to collapse
Thanks a lot bro...
It works in coolpad note 3 plus..so u can edit ur blog saying it is tested in cpn3+ also...all the best...
If I get any qustn I will post it...thank u very much bro
RaghuStar said:
Thanks a lot bro...
It works in coolpad note 3 plus..so u can edit ur blog saying it is tested in cpn3+ also...all the best...
If I get any qustn I will post it...thank u very much bro
Click to expand...
Click to collapse
sure bro
Thanks sir for the guide
yadavdharmendar said:
Thanks sir for the guide
Click to expand...
Click to collapse
All thanks to @Uday Hegde
Unable to dual boot RR with MIUI 8.1
Am trying to dual boot RR with MIUI 8 but its showing same error that was posted by RaghuStar. Even tried by TWRP recovery, but it showing same error, what should I do?
What exactly going wrong?
Am using Coolpad Note 3 Lite
unable to update ramdisk on cpn3. why?
ripon_b said:
unable to update ramdisk on cpn3. why?
Click to expand...
Click to collapse
may be ur using nougat rom.
its bcoz of special characters in board name.
to solve
backup your boot.img
unpack it using any boot.img unpack tool
edit boot.img-board using text editor
clear all the lines in that file
repack boot.img and flash
now it will not fail to update
abhishek_patil said:
Am trying to dual boot RR with MIUI 8 but its showing same error that was posted by RaghuStar. Even tried by TWRP recovery, but it showing same error, what should I do?
What exactly going wrong?
Am using Coolpad Note 3 Lite
Click to expand...
Click to collapse
use data slot or external sd card
I have tried that also..
abhishek_patil said:
I have tried that also..
Click to expand...
Click to collapse
u have log file of the error..??
Uday Hegde said:
u have log file of the error..??
Click to expand...
Click to collapse
Actually it was deleted, but according to my research, for dual boot, ram disk should be updated in both ROMs, but I noticed a problem with nougat ROM, I am unable to update RAMDisk in Nougat ROM, so when I dual boot it with MIUI, it goes in Boot Loop. But how can I update RAMDisk in Nougat?
abhishek_patil said:
Actually it was deleted, but according to my research, for dual boot, ram disk should be updated in both ROMs, but I noticed a problem with nougat ROM, I am unable to update RAMDisk in Nougat ROM, so when I dual boot it with MIUI, it goes in Boot Loop. But how can I update RAMDisk in Nougat?
Click to expand...
Click to collapse
check above comnts for update ramdisk in nougat roms.
but its not necessary to update ramdisk,it is required only to use boot ui.
Uday Hegde said:
check above comnts for update ramdisk in nougat roms.
but its not necessary to update ramdisk,it is required only to use boot ui.
Click to expand...
Click to collapse
Okay, i have following Questions.
1) Which software should I use to unzip img file.
2) I am unable to dual boot it with MM V010 on CN3L,
It showing same error posted by @RaghuStar.
3) Avoiding use of BootUI will prevent BootLoop?
4) Is there any effect of kernel version?
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
#This is a easiest guide to root and to change your stock recovery of Pop C3 4033 WITHOUT using a computer#
Requirement:
1. One-click Root (Framaroot)
Download Source;
https://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Flashify (for root users)
Google Play;
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
3. ClockworkMod v5.0.3.3
Google Drive;
https://drive.google.com/file/d/0BzpIeh3-xjl4RlZCbHl2cHh1clU/view?usp=drivesdk
Instruction:
1. Download & install "Framaroot". After install the binary, reboot your phone.
2. Download both file "Flashify.apk" & "CWM.img", install "Flashify.apk", place the "CWM.img" file at "/storage/sdcard0/".
3. Open "Flashify".
4. Click "backup current recovery".
5. On "Flash" tab, click "Recovey image".
6. "Choose a file", then find and click the "CWM.img" file.
7. Click "Yup" and reboot.
8. Congratulation!
Please, touch the 'Thanks' if this guide is work.
Don't forget to mention my name if you want to mirror this guide.
ClockworkMod v5.0.3.3 dead link
Boot Logo Changer - Works for PIE and OREO - No mods needed to my original post
Change the boot image (NOT the bootanimation) that shows BEFORE the boot animation.
22 June 2020: Version 2
Found tar app to be corrupted. Changed tar app and minor mod to install script.
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this zip file
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
This has only been tested on the Note FE (SM-N935/DS).
If in doubt, check to see if your UP_PARAM partition is /dev/block/sda10.
There are programs on the Play Store that can show the partitions, there names and other info.
This app does make a backup of the original UP_PARAM partition and stores it on your /sdcard as UP_PARAM.bak.
Running this app multiple times will not overwrite the original UP_PARAM.bak
MAKE SURE YOUR SDCARD IS MOUNTED WHEN YOU GET INTO TWRP or CWM.
(Have NOT tested in CWM as I have TWRP installed).
Many thanks to @hanspampel from Android-Hilfe for the original script.
I originally used this for my Tab A 7.0.
To change the logo (.jpg file), replace the logo.jpg in the .zip file with your own .jpg file.
Remember the original Galaxy Note FE (SM-N935/DS) logo.jpg is 1073 x 1464.
DO NOT make the your logo.jpg file too big. I would keep the file size under 250K.
Samsung reduced the size of the logo.jpg file to fill a little over 1/2 the screen. You cannot display anything above the top line in the logo.jpg.
See how I changed my logo.jpg below.
/* Installation */
Steps to install:
- Reboot into recovery
- Select Install from recovery menu
- Select NoteFE-chng-logo.zip
- Follow recovery install prompts
- Reboot and enjoy!
If you need a restore script, use the attached NoteFE-chng-logo-restore.zip
gcrutchr said:
Boot Logo Changer
Change the boot image (NOT the bootanimation) that shows BEFORE the boot animation.
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this zip file
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
This has only been tested on the Note FE (SM-N935/DS).
If in doubt, check to see if your UP_PARAM partition is /dev/block/sda10.
There are programs on the Play Store that can show the partitions, there names and other info.
This app does make a backup of the original UP_PARAM partition and stores it on your /sdcard as UP_PARAM.bak.
Running this app multiple times will not overwrite the original UP_PARAM.bak
MAKE SURE YOUR SDCARD IS MOUNTED WHEN YOU GET INTO TWRP or CWM.
(Have NOT tested in CWM as I have TWRP installed).
Many thanks to @hanspampel from Android-Hilfe for the original script.
I originally used this for my Tab A 7.0.
To change the logo (.jpg file), replace the logo.jpg in the .zip file with your own .jpg file.
Remember the original Galaxy Note FE (SM-N935/DS) logo.jpg is 1073 x 1464.
DO NOT make the your logo.jpg file too big. I would keep the file size under 250K.
Samsung reduced the size of the logo.jpg file to fill a little over 1/2 the screen. You cannot display anything above the top line in the logo.jpg.
See how I changed my logo.jpg below.
/* Installation */
Steps to install:
- Reboot into recovery
- Select Install from recovery menu
- Select NoteFE-chng-logo.zip
- Follow recovery install prompts
- Reboot and enjoy!
If you need a restore script, use the attached NoteFE-chng-logo-restore.zip
Click to expand...
Click to collapse
you can make picture Heart like box NOTE FE? thanks hehe
Asror said:
you can make picture Heart like box NOTE FE? thanks hehe
Click to expand...
Click to collapse
First of all, please to not copy the entire "LONG" post when replying. Just a couple of lines will suffice.
Secondly, I am not a graphic artist. You would need to find someone versed in graphic design to replicate the Note FE 'Heart'.
Is there any way to change boot logo with adb commands without root privileges for Note FE (N935F)?
mephistooo2 said:
Is there any way to change boot logo with adb commands without root privileges for Note FE (N935F)?
Click to expand...
Click to collapse
You do not need root. You DO need a custom recovery like TWRP or CWM. The installation takes place in recovery.
Check Post #1 for PIE update.
Can you share video tutorial for this mod? I confused
Sent from my SM-N935F using XDA-Developers Legacy app
Asror said:
Can you share video tutorial for this mod? I confused
Sent from my SM-N935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Uh...video tutorial?
This is very simple to use.
1. Download .zip file
2. Replace logo.jpg with your own logo.jpg. Make sure it has same dimensions as sample in .zip file
3. Copy .zip to phone
4. Reboot into recovery
5. Install .zip file
6. Reboot phone
7. Voila!! You have customized boot logo!
gcrutchr said:
Uh...video tutorial?
This is very simple to use.
1. Download .zip file
2. Replace logo.jpg with your own logo.jpg. Make sure it has same dimensions as sample in .zip file
3. Copy .zip to phone
4. Reboot into recovery
5. Install .zip file
6. Reboot phone
7. Voila!! You have customized boot logo!
Click to expand...
Click to collapse
I must rooted my phone? Install from TWRP?
Sent from my SM-N935F using XDA-Developers Legacy app
Asror said:
I must rooted my phone? Install from TWRP?
Sent from my SM-N935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes
It doesn't work on the note 7.
It doesn't work on note 7
Hi guys MY PHONE GALAXY NOTE FE SM-N935F DS
TWRP INSTALL ZIP BUT MY PHONE SOFT BRICK !!!!
I made my own logo, 200kb in size. And I got the decision right . And did zip with es File Manager. And I loaded it with TWRP, but the device crashed . Why do you think I made a mistake?
Bu damı gelcadı başımıza said:
Hi guys MY PHONE GALAXY NOTE FE SM-N935F DS
TWRP INSTALL ZIP BUT MY PHONE SOFT BRICK !!!!
I made my own logo, 200kb in size. And I got the decision right . And did zip with es File Manager. And I loaded it with TWRP, but the device crashed . Why do you think I made a mistake?
Click to expand...
Click to collapse
Sorry, there is a problem with the internal tar app. I just discovered it today. I will have a fix tomorrow.
gcrutchr said:
Sorry, there is a problem with the internal tar app. I just discovered it today. I will have a fix tomorrow.
Click to expand...
Click to collapse
Files updated...see Post #1
Very good
Works fine on my SM-N935F, Thanks ! :good: