Related
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
On which firmware are you? 4.0.2.A.0.62?
Is your device rooted? Because permission denied meens, that you have no root.
If you want to install clockworkmod on lww, check this out. It will automaticly install cwm, but I don't know if it works on locked bootloader...
For SE Tweak installer you could check this out. It's a tutorial
how to root it then?
On which firmware version are you? 4.0.2.A.0.62?
Check out this here
But go to settings -> about phone -> build number and tell which version please!
Simplest Guide to install cmw !
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
rachit.rc96 said:
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
Click to expand...
Click to collapse
But that's for unlocked bootloader only! With the method I posted, you can root without unlocking the bootloader...
@OP Please tell us which build number you have! You must go to settings -> About phone -> Build number and tell us the number (or at least the 3 or 2 last numbers). If .42, .58, .62, .69, .432, .578! Otherwise we can't help you
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Dark_Az_ said:
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Click to expand...
Click to collapse
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
mihahn said:
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
Click to expand...
Click to collapse
Sir I've installed cwm using xparts and I'M ABLE to get into CWM recovery mode using the one click button in xparts..bt i CANT do the same while swithing on the fon,by pressing (also tried tapping) vol down key, after seeing the blue light sensor..i've tried many times&many ways as explained in many threads..bt coudnt... :crying:
why its so?? Can u once again say the correct combination of keys pls?
live with walkman..locked bl..stock rom&kernal..just rooted..
EDIT: TAP POWER BUTTON TO ENTER INTO RECOVERY MODE....Its not vol down key now in pvyparts 5.5.0.4
follow
fini13 said:
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
Click to expand...
Click to collapse
first root by this method by doomlord
only follow 1 and 2 steps if u wan Gingerbread
and all for Ics
link- http://forum.xda-developers.com/showthread.php?t=1695514
then insall cwm
download CWM v5.02.7 from here:
http://www.mediafire.com/download/73xv18tht0e8zt4/CWM-Install.rar
requirements:
rooted device
how to install CWM on any xperia
1.turn on USB debugging
2.connect your phone to comp
3.download tthe above file and extract it
4.install-cwm2 for (xperia mini/mini pro/
active/live with walkman)
5.switch off your device
6.turn on the device and wait till "SONY
ERICSSON" logo appers
7.after "SONY ERICSSON" logo appears just
tap the volume down button repeatedly till
CWM open.
The simple method is, try to unlock yor device then install custom kernel that support autoroot and cwm, much tutorial for that in xda. :thumbup:
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Me and Custom Roms authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
For Installing Custom Rom In your Lenovo A6000/+ Follow This
*-------------------------------------*----------------------------------------------*
##Download Your Custome Rom And Compatiable GApps file Which You want to install in Your Mobile And Copy All in Your Sd Card.
##.Download This Zip File and extract it using 7zip or winrar:--> https://drive.google.com/open?id=0Bzk1MbGP5MepTklURFVzSm1ETzQ
###First You have to install custom recovery in your cell for installing Custom Rom ,for that
Install Custome Recovery in Lenovo A6000 / Plus:
---------------------------------------------------------------------
Step 1. Connect your Lenovo A6000/A6000+ to your PC by enabling USB Debugging mode from Developer options in Settings. If you cant find the developer options, Goto Settings> About Phone> Device Information. Tap 7 times on the Build Number. Now you can find the developers options in Settings.
Step 2. After connecting, Select USB Storage device (Open USB Storage).
Step 3. Extract the downloaded files. Copy SuperSU.zip from the zip file into your SDcard or Internal Storage.
Step 4. Now,
Click adb.exe
Click fastboot.exe
Then, Open command.bat from the extracted folder & type one by one all command.
1--> adb devices (Explain- it ll show you list of devices attached)
2-->adb reboot bootloader (Explain-The above command will boot your device into bootloader mode. As soon as you enter this command, you would see A Lenovo Logo with small text ,powerkey long press can reboot phone at the bottom of the screen.)
3-->fastboot flash recovery recovery.img (Explain-This would replace the stock recovery with TWRP Recovery.)
Step 5.Now switch off your device & remove the USB cable and Battery,after 5 seconds plug your battery in. Press & Hold VolumeUp+VolumeDown+ Power button simultaneously.
Step 6. You will see the Custome Recovery in your device
Step 7. Goto Backup. Select System, data, boot & swipe to confirm. It will start creating backup of your device. If in case anything goes wrong, you can restore this backup and can save your cell rather running through posts & asking for help.
Step 8. Goto Wipe>Advanced Wipe>Select Wipe cache, Wipe Dalvik cache, Format System, Wipe data. Swipe for Yes! It will take 10-30secs to wipe all the selected data.
Step 9. Now Go to Install, locate the downloaded ROM file & swipe to Install the ROM file. After the ROM flashing process gets completed again goto Install & Flash the GApps file.
Step 10. After everything is done, wipe cache & dalvik cache.(Optional)
Now Reboot your device.....
Step 11. That�s it! First boot might take 2-3 minutes. Dont worry! Setup your Google Account & restore all your apps.
Voila! You Have Successfully Installed Your Custom Rom And Enjoy.......
**To Root Lenovo A6000 / Plus:
--------------------------------------------
You Can Use Kingroot App - http://kingroot.en.uptodown.com/android
Or
Follow All The Guide Through Step 6 And Then
Step 1. Select Install zip from your Custome Recovery & locate the SuperSU.zip file you downloaded from above link.
Step 2. Swipe to confirm Installation of zip.
Step 3. Done! You have successfully rooted your Lenovo A6000 & A6000 Plus
Qualcomm Usb Drive For Lenovo A6000/+ : https://drive.google.com/file/d/0Bzk1MbGP5MepWFlmLTVlOG9DalE/view
If You Guys Finding Any Problem Please Comment Below
Please Press Thanks If I Helped It Will Encourage Me
my root will be lost on installling custom recovery on my phone??
without installing any custom roms..? @ShivaY
Sent from my Lenovo A6000 using XDA Labs
excellent
perfect explanation
please post a video and also updatepost with pics
Flashed the F2FS TWRP recovery using your guide. Thanks a lot bro.. Gonna flash RR 7.1 with GAPPS pico.
This device is more reasonable to buy as it is small and elegant at a decent price.
It is IP68 water-friendly device and the display is much better - higher FPS than on higher resolution OLEDs - good for action games.
Root using CF-autoroot
Download the file from CF-auto-root repository:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
If you have Nougat or after update to Android 7.0:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
Wipe data + cache before
Flash CF-autoroot before device initial configuration
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
Click to expand...
Click to collapse
Unzip the file
Run Odin from the unzipped folder
Browse by clicking AP button the *.md5 file from the unzipped folder
Connect the A320F in download mode (start the device by holding Power+Home+Volume DOWN)
After starting the device in download mode, press Volume UP one to allow the download
A new COM port should be recognized by Odin after the device is connected via USB
Press Start button in in Odin
Rooting will take place automatically and the device will restart twice.
After the first restart you can disconnect the cable from the PC.
Second restart might take a few minutes.
After that you will find the SuperSU app installed.
Other, more complicated methods:
Rooting using custom recovery:
You will need:
SM-A320F with Exynos CPU (waiting for updates on other model)
Android Marshmallow 6.0.1 on your device
Odin v3.0.4 (download link below)
Team Win Recovery Project - TWRP (download link here) or ClockWork Mod Custom Recovery - CWM (download link below)
(Recommended custom recovery: Team Win Recovery Project :good: - more features, newer, works better)
SuperSU-v2.79-201612051815 (latest ZIP version available today - download link below)
SM-A320F TWRP & CWM recovery installation procedure:
On your device enable developer options and then disable OEM lock (FRP lock) for the device to allow you to flash custom recovery
(Activate OEM unlock from developer options menu)
Boot your device in Odin downlaod mode (hold VolDOWN + Home + Power)
Flash the *.tar file of TWRP or for the CWM using Odin's PDA option
(Uncheck Auto Reboot and F. Reset Time)
Force reboot your device (hold VolDOWN + Power for 10 seconds)
SM-A320F SuperSU ZIP installation procedure:
Copy SuperSU-v2.79-201612051815.zip on a microSD card (trough USB data cable or any other method)
Unplug the USB data cable from the phone and shut down the device
Start your device in Recovery mode (Hold VolUP + Home + Power)
(RECOVERY IS NOT SEANDROID ENFORCED - this warning is normal when booting into CWM custom recovery but not with TWRP)
The recovery menu will appear
> Using TWRP Recovery:
Swipe to allow modifications
Tap on Install
Tap on Select Storage at the bottom and select MicroSDCard then tap OK
Browse for the SuperSU-v2.79-201612051815.zip and tap on it to install it
Swipe to install SuperSU (confirm Flash)
> Using CWM Recovery:
Select Install zip update package (use VolDOWN/VolUP to navigate and Power to select)
Select Choose zip from sdcard
Select SuperSU-v2.79-201612051815.zip and press Power to install Super SU
The installation will perform automatically and the device will reboot twice.
First reboot will take longer. Please be patient. After the second reboot you will have SuperSU and root.
Downsides/bugs:
Knox will be tripped the second you flash a custom recovery (Warranty void: 1 - non reversibile)
(That means that you will lose the warranty for your device and that can not be changed)
(Perhaps that's why I personally can't invest more than $300 in a Samsung cellphone ever)
You won't be able to use Knox-related functions including Secure Folder ever again
Because of a SuperSU bug you won't be able to use Smart View (Miracast, project the screen to smart TV) unless you make an edit as follows:
Lewdog45 said:
Use a file browser such as Root Browser and go to the root of your device then locate the "System" folder and find build.prop and edit it with any application that can edit it and find the bottom line, right at the edge of the bottom line you need to press enter twice and then paste this:
wlan.wfd.hdcp=disable
And then save it and reboot your device.
Click to expand...
Click to collapse
Special thanks to: ashyx for compiling and updating TWRP recovery for SM-A320F and to XN Logos for providing compatible CWM recovery with SM-A320F.
Please feel free to post your attempts on rooting this device and the results. If other methods will show-up I will include them up here.
jnflos said:
Up to this point there is no success in rooting the Galaxy A3 2017 device.
This device is more reasonable to buy as it is small and elegant at a decent price.
Unfortunately there is no sign of working root method for the device.
Please feel free to update this topic with your attempts on rooting this device, and if success will strike, it will float up here for everyone to see.
Click to expand...
Click to collapse
+1
Thanks to developpers
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Here
I tried this morning without succes
copernic75 said:
I tried this morning without succes
Click to expand...
Click to collapse
Why didn't it work? Any errors in Odin?
No error in odin.
When i tried To reboot in revovery mode i don't have access to cmw .. just Android error message + Knox error
XN Logos said:
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Click to expand...
Click to collapse
Thanks! I will test this on my Galaxy SM-A320FL (single sim) to see...
Root was successful! I will update the first post with the mini tutorial and the files needed
REMOVED
I have indeed a a320-FL french model... Exynos inside.
What do you suggest?
jnflos said:
Root was successful! I will update the first post with the mini tutorial and the files needed
Click to expand...
Click to collapse
This cwm worked for Exynos?
tys0n said:
This cwm worked for Exynos?
Click to expand...
Click to collapse
Yes it worked. Please follow the tutorial that I wrote on the first post.
jnflos said:
Yes it worked. Please follow the tutorial that I wrote on the first post.
Click to expand...
Click to collapse
Ok good then I will remove my earlier post. I don't have the device so I can't try it.
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
copernic75 said:
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
Click to expand...
Click to collapse
Format the SD card on your PC using FAT32 option (use an USB adapter).
Copy the zip on the card, Insert it into the phone and reboot into recovery to test.
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
copernic75 said:
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
Click to expand...
Click to collapse
Yes. You can flash twrp in cwm and reboot to recovery. Twrp will be there instead.
wich version to choose?
Sorry. There's no twrp for a320 yet, but in general it's working fine to flash new recovery with existing one.
Hey guys, I will receive my a3 2017 soon and I was wondering if it would be preferable to root it now than waiting for the update to Nougat and re-root it then... Any idea when the update will be available for this phone? I was also wondering if I should use a specific brand or type of micro sd card with this phone?
Thanks
Since i just found some request about rooting and custom recovery of C variante of Archos 50 platinum on xda. I decided to make a thread which works with both variantes 8 or 16GB and all firmware.
I installed TWRP 2.8.7 from Source
to a device with firmware:
Code:
[email protected]
Build fingerprint: archos/SCAC50CPL/ac50cpl:5.1/LMY47D/20151116.140537:user/release-keys
Platform: armeabi-v7a, 32-bit binary
and to a 2. device
[email protected]m
Today i saw, it seems like Archos provide two firmware for the SC7731g Euphoria or
Mesarthim (OTA pac download see below). Run firmware check OTA update 2x befor rooting to get latest - V05.
Firmware checkbox:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mesarthim firmware
Root + TWRP via adb
To flash recovery >
Note: Install custom recovery delete all data on you storage so backup 1st. Maybe remove sd-card.
Enable developer option (tick ~10 times in system setting on build-number)
In developer option allow OEM-unlock and usb-debugging
Connect device to you pc in debugging mode (requires installed driver on pc)
On pc run fastboot (adb) and flash recovery
with following commands:
Code:
adb devices
press enter
now you see device port damones running
Code:
adb reboot bootloader
press enter
archos turns off
Code:
fastboot devices
press enter
archos boot into fastboot mode = black screen
Code:
fastboot flash recovery recovery.img
press enter
wait till all files are transfered
# Now you can reboot into TWRP by press power and volume +
# downloaded recovery has to be in minimal adb fastboot floder
Click to expand...
Click to collapse
If you done setup on your device, save a full backup with twrp
Driver and tools:
Keep in mind you have to install needed debugg usb-driver and fastboot (adb)
or use other tools as SPD upgrader tool + SpreadTrum driver.
Fastboot installer and driver:
https://forum.xda-developers.com/showthread.php?t=2588979
Fastboot as Live boot image
With twrp you can now install latest superuser to manage superuser authorization or xposed.
uninstalled superSU, now i use magisk
Switched back to supersu less bugs with xposed. The patched boot.img can be used to enable root if Archos update firmware
Do not blame me for any damage while installation
If you get into trouble booting your device. You can try
1. a) fully power it off by press Power off 10sec. or b) remove battery.
2. Copy V05 or V08 update.zip depents on your installed firmware to your Archos and reinstall firmware by apply message if usb is unplugged. Any flashable .zip get auto detected and became deleted from internal storage if not orginal.
3. flash update.zip via fastboot mode. (in case bootloop you maybe fastboot via button on boot into bootloader or adb)
4. flash stock rom pac file from update.zip to Spreadtrum Chip device via factory downloder +(driver) Download extract pac from .rar part 1 part 2
5. now you can flash via twrp my aroma rom if any needed stock app is missing. (see 2. post)
6. Flash v05 stock recovery = unroot
7. restore TWRP back ) if you did not do that 1st (o:
Inizialize twrp or superuser first time maybe take up to a minute and a reboot
Alternative way to get root & twrp:
Not test by myself but seems to work:
1.
a) Kingroot (to manage superuser authorization = root)
b) Flashify (to install twrp)
Click to expand...
Click to collapse
2.
a) https://www.supersupro.co then you can flash TWRP by
b) https://twrp.me/app/ or else
Click to expand...
Click to collapse
Extra stuff > # TWRP lock, dial engineer mode, videos
Password protection for TWRP (lock) with https://forum.xda-developers.com/xperia-z2/general/lockable-twrp-recovery-t3151283
To improve media handel (video rec. buffer, i´m not 100% on it) maybe replace codec_pga.xml of attached archiv on root floder \system\etc\codec_pga.xml
As far as i know it´s possible to swap a faster sd as internal memory to improve read and writte speed by tools e.g. Root External 2 Internal SD.
Dial: *#*#83781#*#* Open engineer mode
short video of xposed + manuel boot into recovery
https://youtu.be/83z0Inyx6UM
broken display or camera?
https://youtu.be/40xz3pRUfu8
Display and selfie-cam replacement seems to be not working
Here is a good video:
Camera (13mp) replacement is works (easy)
Just open housing by removing battery and screws, cam-cabel can be unplugged as simple as in b-versions display-cable
How to flash Archos 50c Platinum (Spreadtrum) stock rom
https://youtu.be/geko8jTLWHk
Today i wasted a lot time by try to flash a stock rom to SC7731g device. Now i got it :cyclops:
Chip can be checked under settings / about phone / Baseband version /
or by installed firmware
Download and install driver and SPD Upgrade Tool R2 or up. Then it is important to hold Volume down (-) if you connect usb to flash files, otherwise you get a CANCEL message! If SPD tool start download no need to hold volume down.
factory downloder +(driver) Download update.zip with pac file inside from 4pda.ru forum. If you flashed stock firmware by flashing tool. Install OTA V10 run update check again and install latest update befor flashing TWRP.
Code:
At the moment lastest version BSE70M ARCHOS AC50CPL 20160829 [email protected]
After flashing BSE70I_ARCHOS_AC50CPL_20151021_V08_FS031_CF2_BSE70I_Archos_CTS_L47630M_20151021_DDR3_HD_G4W18_ALS_182138.pac to my
[email protected] ...it´s now
[email protected]n ;) :)
Befor i flashed V08, i also put
BSE70M_ARCHOS_AC50CPL_20160506_V01_FS031_CF2_BSE70M_Archos_L68368_20160506_DDR3_HD_G4W18_ALS_091757_OTA.pac
to it but i was not able to update the older V01 so better not flash the OTG pac if you get it from www
As you can see i add sometimes new stuff to that thread maybe you add a bookmark to check your device thread soon
If you find thread helpful i please to hit thanks button or rate it.
Maybe more information on flashing is needed, feel free to reply. Request are welcome as well as suggestions
More in my following replies ----->>
PW: all-gsm-solutions.tk
Orginal charger is not effictive, so if yo got another replace!! you can save 50% input power even more.
Orginal 110-250V 0,3a my new charger just need 0,15a (6Watt) input!!!
If you are new to customize device and you just finish rooting maybe skip aroma installation
take a breath and backup phone!
Here my TWRP flashable aroma installer for you.
Video https://youtu.be/soFEBiRr8KY
Additional tools can be selected to keep your stock customized Aroma rom works with touch menu (did not as i used ASSAYYED kitchen).
Note: Installing apps via aroma zip to your device take 2-3min. till all installation is done. So wait till you can unlock screen, after reboot. It´s fast as installing all apps via apk and much faster as flashing a orginal firmware!!!
To prevent automatic earse of flashable update.zip from internal storage keep usb connected till you flashed files with TWRP or rename zip - like .zi -can be renamed with TWRP for flashing. Usually no wipe needed.
Most Xposed moduls need framework -->
Installer categories:
Browser (Puffin free, UC_browser)
Launcher / Keyboard (S-launcher, xperiaKeyboard mod)
Media (Root Explorer + root plugin, Es explorer, Media converter, Vlc)
Xposed installer:
(xposed installer -->Can be flashed with supersu & xposed framework / has to be installed to use most of following
Befor install Xposed, flash framework xposed framework sdk zip
Xposed moduls:
appsoppsXposed (manage authorization as on android 6 but better..thinking latest version was not working so i use a mod)
LightningWall, AFwall (firewalls)
Greenify (kind of taskkiller...maybe also work without xposed)
Roaming on national network? It can be fixed with https://forum.xda-developers.com/xposed/modules/app-roaming-control-v1-0-t3267154
Bootanimation can be flashed (install via twrp) a working once https://forum.xda-developers.com/crossdevice-dev/android-one-general/mod-boot-animation-t3062873
S-launcher or else (instead of shipped apo- or google launcher)
tk.wasdennnoch.androidn-ify 795 and up seems to support Lollipop now :good: several Android N features
added stockrom:
apps, priv-app, media all stock sounds + some free ringtones
(supersu from "stock" apps floder only works if it was flashed befor)
Archos+50c+Platinum+Aroma-installer+1.2.zip based on Euphoria V05. Latest stock from Archos ftp server. As long as you do not flash system files you can use all my archos aroma installer
Firmware checkbox (Mesarthin download):
Archos+50c+Platinum+aroma+1.2b.zip based on Mesarthin V05 stock from my OTA dumps
2. Firmware checkbox:
May not working with Mediatek chip use:
Lollipop toBsucht aroma.zip = http://www.mediafire.com/?pe7i7a92wo48mn7/ old aroma without stock rom apps ( Universal installer for ALL Lollipop not only Archos)
Now i got my doubts on a Mediatek chip on AC50CPl as written in 4pda thread, only two V05 firmware^^
After a websearch i saw Archos 50b Platinum use Mediatek MT6582 but not c variante
Other smartphones with SC7731g and same hardware: Archos 55 platinum, Archos 55b Platinum, Gigabyte gsmart classic joy
Mediatek MT6582 = archos 50 b platinum
use unofficial cyanogenmod and CWM PhilZ Touch 6.59.x or else.
You are new to flashing rom? Make full backup with TWRP & Titanium Backup to prevent yourself lossing any data
You like to mod the aroma feel free to share :fingers-crossed:
Opening a AC50CPL battery
Two days ago i "opened" a BSE70I battery as you can see in attached pictures. I like to run my Archos without battery since it seems like i´ve kind of blown usb port. Charge do not work since i used a 2000mAh (+1A) on it. It is showning charge but don´t.
edit:
Today i was thinking about my accu problem. Finally i note my old powerbank simply do not provide enough power. Then i used 3 batteries LR6 (AA) connected in series with success.
Be careful if you handle accu in a non supposed way. Good chance of getting smoke or fire!
Archos 50cpl
Hello pls I was directed to come here to make any complaints to seek help.please am really confused the problem is I installed the twrp file in my phone and rebooted it and my phone won't go back how it was. so it's still going to take me to the twrp custom recovery if I switch on and off so please what is the next thing and what am I to do next please can someone tell me??
Welcome blossomunuagba,
usually you can boot from TWRP into sytem...
If this is not working you can use recover backup in TWRP if dumped befor. If you did no backup you maybe lucky and wipe option works to enable boot system. If you still fail you maybe use the aroma-rom but you have to know what files you have to replace to minimize lost data, etc. maybe you are lucky. In privat you already told me you cann´t make your phone boot the system by flashing aroma.
If you did not wipe everything you still can make a backup to prevent data lose
My sugguest:
1) full flash firmware .pak file with factory download tool. Fix 100% likely !!!
2) Not sure which tools you used to install TWRP. You can replace custom recovery with stock recovery which maybe fix a corrupt recovery. Use same tool as you used to flash twrp or use install image option of twrp
3) ..last but not least maybe flash supersu.zip or xposed sdk since you wrote you tried to install aroma. Both zip files must be installed befor install the full aroma.
Here latest xposed sdk zip:
http://dl-xda.xposed.info/framework/sdk22/arm/xposed-v88.2-sdk22-arm.zip from http://dl-xda.xposed.info/framework/sdk22/arm/
If you use "magisk" you have to use another xposed.zip
In hope way 2 or 3 make your phone load the system.
Attached stock recovery so you can easy go back to stock
Archos 50c platinum
hello thanks for the reply it was helpful my phone is back and running although I have one more issue that's installing the twrp file on my phone the first alternative you gave is abit confusing but the second alternative looks easier that's (kingroot + flashify) I made an error some where and that lead to the issue I had with my phone..pls u said that u have not tested the second alternative I will be more grateful if you do that an explain in details if possible make a video so that others also facing this challenge can benefit from it. thank you:cool
@blossomunuagba
blossomunuagba said:
hello thanks for the reply it was helpful my phone is back and running although I have one more issue that's installing the twrp file on my phone the first alternative you gave is abit confusing but the second alternative looks easier that's (kingroot + flashify) I made an error some where and that lead to the issue I had with my phone..pls u said that u have not tested the second alternative I will be more grateful if you do that an explain in details if possible make a video so that others also facing this challenge can benefit from it. thank you:cool
Click to expand...
Click to collapse
I have to fully unroot my Archos to make such a video. Sorry i do not like to do so. Maybe if you use to go alternative way record and share
For sure you find a lot video showing how to use kingroot or flashify. Afaik if kingroot is used it install an alternativ superuser app which can be replaced with e.g. supersu. but if you have set up fastboot should be better to go on that..my opinion.
Basicly it seems you replaced stock-recovery, so just do it in the way with TWRP- recovery.img. Thinking you it already installed TWRP with success but you messed up aroma installation.
I´m sure about the point you stack at the moment but nice to see your phone is running again proper.
There are two other ways to get root / custom recovery
1. Flash a patched boot.img (magisk patch boot.img which can be used to root if twrp gets incompatible)
2. a) Replace trwp (recovery.img) inside stock-rom and flash recovery by factory downloder.
2. b) patched boot.img can be too
#today i flashed twrp recovery with SPD-tool but you know this factory reset phone (was helpful to fast recover a upper firmware backup)
The attached Magisk boot.img can be used if TWRP need to be updated. So we already got SU-permission on Anroid 6 and up
Debloat and silent systemsounds, camera click sounds - replacement.
example Camera_click.ogg
/system/media/audio/ui/
small download: https://forum.xda-developers.com/attachment.php?attachmentid=4396959
big pack: http://www.mediafire.com/?8pu3qv2ul7opn8z/
Did you know you can remove a lot more files in system? Files in following folders about 100mb extra space:
- system/preloadimage/
- system/preloadmp3/
- system/preloadmp4/
Also possible to remove "all" alarms, notififcation and ringtones. Just set an audio from sdcard befor delete
You can remove (debloat) more from root system folder. Uninstall bloat system apps with titanium backup or es explorer but becareful!
Additional i like to suggest more apps to install yourself to your phones.
######## xposed modul to clean recent app list #######
https://forum.xda-developers.com/xposed/modules/recent-app-cleaner-v2-0-t2734053
install, activate, reboot, start once and give SU permission
1. I use Whatscall, Dington, TalkU to make "free" phone call. You pay by watch ads. Whatscall is good to get fast free credits. TalkU and Dington are pretty similar. Autor is "our" phone manufactur Cheetah.
Benefit you can make real phone-call via wifi, safe expensive calls, etc.
If you have no playstore running you get less ads = less credits!
I use them since one year no problems. Me tested other "free" call/sms apps but did not find better once. Please no referal request!
2. shake2safety
Now i use it to enable emergency call by quickly press 4 times Power button. It can be enabled by shake also. That is a feature of new IOS as well as Samsung Galaxy. The benefit is you can automatic call even is screen is broken, eye or finger issue, else.
You can test your setup by automatic call friends number to prevent by mistake calling emergency
Only sms is working if not installed via playstore :/
** For location please keep your GPS on. When there is no Wi-Fi, GPS or mobile data then no location goes with the message/picture. Also it gives your last location if GPS is off.
Click to expand...
Click to collapse
So go and install that app!!! Alternative maybe SOS Stay Safe
Me also like https://play.google.com/store/apps/details?id=flar2.homebutton to enable flashlight by hardware button
edit: Started use s8+ launcher to unlink media volume via its sidebar
Alternative you can use quick volume contol
or maybe com.bhanu.androidpvolumeslider aka com.bhanu.volumebutton
Sadly not working this xposed modul (v1.6) https://forum.xda-developers.com/xposed/modules/mod-ringer-notification-volume-unlink-t2416768
Today i found BUSH AC50CPL looks 100% same as our archos maybe possible to use parts & TRWP on it or at least easy build a port
Also had to flash pac once again. Always used BSE70I today i failed then used BSE70M pac with success. By the way i seems on SPD-tool v2 you hold volume down button while plug usb to enable downloading, on v19 you have to power up device and hold volume down button.
Hello everyone
so i bought a cheap tablet to mess around on and wanted to root the device to remove the bloatware thats on the tablet by default
ive noticed there are not many methods out there that show for this particular tablet. Due tothe nature of rooting i dont want to just jump in feet first. Ive done rooting before but not for this particular tablet/model
the details are
On the box - Lenovo TAB E10
Model - Lenovo TB-X104F
Android version 8.1.0
Can anyone advise a method to root this please?
thanks
kaos182 said:
Hello everyone
so i bought a cheap tablet to mess around on and wanted to root the device to remove the bloatware thats on the tablet by default
ive noticed there are not many methods out there that show for this particular tablet. Due tothe nature of rooting i dont want to just jump in feet first. Ive done rooting before but not for this particular tablet/model
the details are
On the box - Lenovo TAB E10
Model - Lenovo TB-X104F
Android version 8.1.0
Can anyone advise a method to root this please?
thanks
Click to expand...
Click to collapse
Hey i just received this device today,. have you had any luck yet?
Tab E 10
The key to root is always the boot.img file of the device , or a device-specific twrp ! For the X 104 F i did not find a twrp on the net . This means you have to get the boot.img and go with Magisk !
- download and start on your laptop "lenovo moto smart assistant "
- connect the tab and go to "rescue" , there choose your precise model
- follow the instructions ......the LMSA starts to download a rescue file in .zip format
- once the download (app 1GB) is finished , stop the process
- now the TB_X104F_S100020_180831_ROW_DCC.zip is on your laptop
- open menu in the upper left corner and under "Download center " you will be pointed to the location of the .zip file on your laptop
- open the zip and there is your boot.img , next to other useful files
- extract the boot.img to harddrive and follow the instructions to install Magisk ........done , you are root ! (the instructions for Magisk you find on the net )
Do you have detailed step-by-step instructions on how you created the recovery and used it with Magisk to root the device? Did you also install a custom ROM?
Randova said:
Do you have detailed step-by-step instructions on how you created the recovery and used it with Magisk to root the device? Did you also install a custom ROM?
Click to expand...
Click to collapse
You don't have to have a custom recovery to root it. Just use the above steps get the boot img then patch it with magisk and replace the stock boot img in the download file through the Lenovo tool and recover your device and you now have a rooted tablet. Just install magisk manager and it will install magisk because the boot img is already patched
Would anyone happen to have a step by step of how to install resurrection remix oreo for this tablet i got it rooted by above method but now i wish to know if it is possible to install RR and if so what all do i need..