I've had several requests for getting rid of the navbar. Immersive is great but doesn't totally get rid of it. This seems to work or at least I've had no complaints.. Boot into TWRP and flash. I don't have this phone so this has not been tested.
Thanks to @THEbigSWEEN for the system files.
8.0 Navbar gone Sept
https://www.androidfilehost.com/?fid=962021903579490797
8.0 NavBar Gone November
Edit: I have an experimental adb method of install but root is still necessary.
https://www.androidfilehost.com/?fid=889964283620768132
Mods for those that have flashed NavBar Gone November
Make sure you download it and flash it again. It was updated on Nov 23rd.
Center Clock
https://www.androidfilehost.com/?fid=962021903579494446
------------------------------------------------
Pixel 8.1 NavBar gone dp1
https://www.androidfilehost.com/?fid=817906626617948717
Pixel 8.1 NavBar gone dp2
https://www.androidfilehost.com/?fid=745849072291691579
Pixel 2 XL 8.1 FINAL TWRP flashable
https://www.androidfilehost.com/?fid=889964283620770711
With center clock
https://www.androidfilehost.com/?fid=673791459329065868
-------------------------------------------
8.1 FINAL ADB TulsadiverModsInstaller (includes Navbar Gone)
https://www.androidfilehost.com/?fid=889964283620771344
Installation instructions for 8.1 Final ADB method.
1. Download the TulsadiverModsInstaller.zip above. Unzip it on your c:drive on your PC so that it reads like c:\TulsadiverModsInstaller and all the folders just inside it like this but no .zip of course.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Plug your phone into the PC. Run the TulsadiverModsInstaller.bat. First thing you must do is install the Base, selection one. After that you can choose whatever else you want. When done, select reboot. You will be prompted to give adb superuser rights. You need install base just once. It will create a ozopstock restore zip on your sdcard. That will be your stock restore zip. If you ever flash base again that will be replaced so keep that in mind. I don't have this phone but this worked on my Nexus 5X on 8.1 final.
If this doesn't seem to change anything when installed, with root explorer, go to data/local on your phone's root drive, if BusyBox is there make sure it has 755 permission. If it is not there, take it from the installer zip and put it there. Give it 755 permission and try again.
@THEbigSWEEN here is a stab at your NavBar gone with center clock w/seconds. Let me know if it isn't right.
Tulsadiver said:
@THEbigSWEEN here is a stab at your NavBar gone with center clock w/seconds. Let me know if it isn't right.
Click to expand...
Click to collapse
Awesome! That was quick! I'll try it out as soon as I get home from work and report back.
Also JUST realized, I didn't think about it earlier, but I'm currently on the 8.1 developer preview / beta program. Not sure if that will affect the mods or not. If there are any issues, I was already planning on reverting back to 8.0, so I can pull the necessary files again if the current ones cause any issues. Just wanted to make you aware as I just thought about that.
Thanks again for helping make our devices that much better!!
THEbigSWEEN said:
Awesome! That was quick! I'll try it out as soon as I get home from work and report back.
Also JUST realized, I didn't think about it earlier, but I'm currently on the 8.1 developer preview / beta program. Not sure if that will affect the mods or not. If there are any issues, I was already planning on reverting back to 8.0, so I can pull the necessary files again if the current ones cause any issues. Just wanted to make you aware as I just thought about that.
Thanks again for helping make our devices that much better!!
Click to expand...
Click to collapse
So what were the files you gave me? November update? I had better clarify in this post.
Yes, makes a huge difference.
What are you guys using to navigate the phone w/o navbar? I was using Swipe Navigation app on Nougat but apparently the dev didn't update it to Oreo yet. So I'm looking for alternatives. Thanks
Tulsadiver said:
So what were the files you gave me? November update? I had better clarify in this post.
Yes, makes a huge difference.
Click to expand...
Click to collapse
Yeah I figured as much, I'm sorry about that. Didn't even think about it till right before I posted here. I was in another thread talking about reverting back to 8.0 when it dawned on me. The files I gave you are from 8.1 October security patch. Build opp5.170921.005.
When I get home I'll get you the 8.0 November files. Again, sorry for the mistake!
---------- Post added at 06:25 AM ---------- Previous post was at 06:22 AM ----------
Bogega said:
What are you guys using to navigate the phone w/o navbar? I was using Swipe Navigation app on Nougat but apparently the dev didn't update it to Oreo yet. So I'm looking for alternatives. Thanks
Click to expand...
Click to collapse
I use LMT. THREAD LINK HERE I've used it on my last several devices. Definitely would rather have the extra screen space, plus helps with some of the concerns about navigation bar burn in.
THEbigSWEEN said:
When I get home I'll get you the 8.0 November files. Again, sorry for the mistake!
Click to expand...
Click to collapse
My mistake for not clarifying. Never occurred to me Pixel 2 XL could be on preview, not sure why, because it's so new I guess. But there will be a NavBar gone for both, which is good.
@eqbirvin and @gaw316, I have a 8.1 preview navbar gone to try and should have a 8.0 November soon
Tulsadiver said:
My mistake for not clarifying. Never occurred to me Pixel 2 XL could be on preview, not sure why, because it's so new I guess. But there will be a NavBar gone for both, which is good.
Click to expand...
Click to collapse
I updated a few days ago and it completely slipped my mind, when you agreed to put something together I got over excited and completely forgot about any of that :silly: I'm going to try out your 8.1 packages first to confirm that they work as intended while I'm still on the dev preview and then I'll roll back to 8.0 and send you the files once I get them uploaded.
THEbigSWEEN said:
I updated a few days ago and it completely slipped my mind, when you agreed to put something together I got over excited and completely forgot about any of that :silly: I'm going to try out your 8.1 packages first to confirm that they work as intended while I'm still on the dev preview and then I'll roll back to 8.0 and send you the files once I get them uploaded.
Click to expand...
Click to collapse
Sounds like a great plan.
Tulsadiver said:
Sounds like a great plan.
Click to expand...
Click to collapse
So just to update, looks like there is a bit of a speed bump. Trying to boot TWRP and was stuck at the splash screen with the logo for 15+ minutes. Checked the TWRP thread and others are reporting that it hasn't been able to boot with the 8.1 preview and that the November security patch breaks it as well.
The factory images Google has are for September, so it looks like September and possibly October are the only viable options at this point. Still going to downgrade to factory images from Sept and will grab those files.
Not sure when updating if it will go straight to November's patch or will do October first? Also, if anyone has had a different outcome other than what has been reported and can successfully boot TWRP on 8.1 or Nov patch please chime in. Wondering if the patched boot.img via Magisk could have anything to do with it failing to boot? I wouldn't think it would, but then again I'm not the most knowledgeable with the technical side of these things.
Is there a video or something showing what this mod does? Im not sure how you get around the phone without a navbar. Just curious. Sounds great but just want to know how this works.
Tulsadiver said:
@eqbirvin and @gaw316, I have a 8.1 preview navbar gone to try and should have a 8.0 November soon
Click to expand...
Click to collapse
Yes! Thank you very much.
jrharvey said:
Is there a video or something showing what this mod does? Im not sure how you get around the phone without a navbar. Just curious. Sounds great but just want to know how this works.
Click to expand...
Click to collapse
No video. Your NavBar is completely gone. You need to have a replacement in place like this.
https://forum.xda-developers.com/showthread.php?t=1330150
This navbar remains hidden, I Believe, until you swipe up. Read up on it. I haven't tried it but a whole of people use it.
Bogega said:
What are you guys using to navigate the phone w/o navbar? I was using Swipe Navigation app on Nougat but apparently the dev didn't update it to Oreo yet. So I'm looking for alternatives. Thanks
Click to expand...
Click to collapse
I use "Unique Controls"
Only use it for a basic pie on the right side of the device and don't utilize the options for a second layer of icons. Just back, home, and recents. Quick and snappy and I don't have any big battery drain from it.
Tulsadiver said:
@eqbirvin and @gaw316, I have a 8.1 preview navbar gone to try and should have a 8.0 November soon
Click to expand...
Click to collapse
Tulsa, thank you so much!! You came through fast with this. I'm looking forward to the 8.0 one
eqbirvin said:
Tulsa, thank you so much!! You came through fast with this. I'm looking forward to the 8.0 one
Click to expand...
Click to collapse
I am going to start with the Sept one since the November one cannot use TWRP at this time. Should be ready shortly. I just got the files from @THEbigSWEEN
eqbirvin said:
Tulsa, thank you so much!! You came through fast with this. I'm looking forward to the 8.0 one
Click to expand...
Click to collapse
Posted 8.0
@THEbigSWEEN, here is one for you to try...
Tulsadiver said:
@THEbigSWEEN, here is one for you to try...
Click to expand...
Click to collapse
Awesome! So far working like a charm. Consider yourself added to the list of devs I'm going to be donating to here on payday for taking my great Pixel 2XL and making it amazing!
Also, thanks for taking these requests and busting them out same day. Seems like you've been on it as soon as I got you files. You're a freaking machine!
Related
CM14.1 is here for the LS990, aka the Sprint LG G3.
This is unofficial until one framework change gets merged in for fixing LteOnCdma support. Once that merge happens, we'll get nighties.
This should have fully working modem, nfc and all the things you've come to enjoy. World phone mode is enabled, but I do not have an activated GSM sim to fully test the GSM side.
Instructions
This has only be validated on ZVC or newer firmware.
Download cm-14.1, and gapps. Put them on your sdcard, reboot to recovery. Flash, and enjoy!
The latest will be available at:
http://downloads.codefi.re/shelnutt2/g3/ls990/cm14_1/
Gapps:
OpenGapps:
http://opengapps.org/?api=7.1&variant=nano
Click to expand...
Click to collapse
Known Issue
None!
Click to expand...
Click to collapse
Change Log
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the following people:
invisiblek
Kasual52e
rashed
Click to expand...
Click to collapse
Source
http://github.com/CyanogenMod
Click to expand...
Click to collapse
Is the speakerphone Echo fixed?
There is a setting in stock phone "call settings" that has to be changed in order to keep it from happening.
In the stock "call settings" you have to turn off noise suppression and turn on voice enhancement:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think all of the source built Roms are built with this setting set to it's default settings which causes the echo even in the stock Roms until it's changed to the above. (The pic is from MM but it's prevalent in the Nougat Roms as well).
People do a lot to try to fix the problem, change: mixer_paths.xml to no avail. turning the volume down, changing the Mic settings doesn't take the problem away.
I would love to see this fixed. I can't use any of the source built Roms because of it. (I can't stand to put the phone to my head, I have to have speakerphone).
Anyway hope this gives the right people the insight to fix the problem.
Thanks for taking the time to bring us these awesome builds.
? Sent from DjRobBlaze's VS985 ? Rockin' ? Fulmics 6.6 ? using Tapatalk. ? ®
Shelnutt2 said:
CM14.1 is here for the LS990, aka the Sprint LG G3.
This is unofficial until one framework change gets merged in for fixing LteOnCdma support. Once that merge happens, we'll get nighties.
This should have fully working modem, nfc and all the things you've come to enjoy. World phone mode is enabled, but I do not have an activated GSM sim to fully test the GSM side.
Click to expand...
Click to collapse
That framework change you mentioned to fix LteOnCdma support, is that in this release and you are waiting for it to be merged with CM official?
Just wanted to thank the OP, this rom is working perfectly (dec 15 build). It's actually more stable than the cm14.1 nightlies for the d851 G3 (T-Mobile). I've had no sim card or data issues of any kind. Miracast works great as well.
bavarianblessed said:
That framework change you mentioned to fix LteOnCdma support, is that in this release and you are waiting for it to be merged with CM official?
Click to expand...
Click to collapse
It is included in these unofficial builds. It is awaiting merge upstream, https://review.cyanogenmod.org/#/c/176865/
in light of the news today, I'm guessing the ls990 is never getting merged into the nightlies, and we might be looking at a whole new rom in the future (lineage).
its hard to believe really... cyanogenmod seemed like it was poised to take over... its been my favorite rom for about 3 years now, and was really starting to get good in this 14.1 build (miracast finally works!)
i guess just thanks for building these, not sure where we all go from here...
Whatever happens there will continue to be unofficial builds of either cm or lineage until we are able to get the necessary changes merged to make stable official builds
Engineers running businesses get owned by business people running businesses. From 10k km, it seems the cyanogen Corp got edged out by 'partners' with less then admirable ethics and motives. The code is still ours, thanks to GPL. Our community will continue to build and rebuild. Kondik has learned to play hardball the hard way, and will hopefully dust himself off and come back even stronger. The hope for a mainstream android fork continues... and it's likely to keep on that way just like 2017 is going to finally be the year of desktop Linux. In the mean time, thank and donate to our developers, their blood oils the machinery of free software.
Rooted ZVC Firmware?
Where can I find rooted ZVC Firmware? I tried this with the rooted ZVB firmware at https://forum.xda-developers.com/sp...990-zvb-root-method-zvb-rooted-stock-t3211878, but after rebooting, it doesn't look like I have root privileges.
rogerdc said:
Where can I find rooted ZVC Firmware? I tried this with the rooted ZVB firmware at https://forum.xda-developers.com/sp...90-zvb-root-method-zvb-rooted-stock-t3211878, but after rebooting, it doesn't look like I have root privileges.
Click to expand...
Click to collapse
Rooted ZVC:
http://forum.xda-developers.com/sprint-lg-g3/development/barecee-zvc-t3257826
Straight stock partitions http://downloads.codefi.re/autoprime/LG/LG_G3/LS990/stock_partitions/ZVC
There's a nice little modem/rpm/tz flasher zip in the ZVB folder there that can be commandeered to flash the relevant ZVC partitions with a little zip hacking.
just flashed this after failing at the Resurection and Cypher N roms. I couldnt get data, cell, text or any networks to work.
This worked fine out of the box. Awesome! Nice and smooth. No force closes. Bluetooth appears to be nice and stable at least on my headphones which are a foot away from me. Havent tried my car yet.
On a side note, the whole reason I was trying to upgrade to something nougat based was to get the google assistant working. There appears to be a workaround if you are not a pixel phone listed here. https://forum.xda-developers.com/android/software/guide-how-to-enable-google-assistant-t3477879
Then I started reading and it doesnt appear the g3 is on its list of supported phones for this. Has anyone tried it yet? Does it work, and if so, what technique did you use?
CMILD561 said:
On a side note, the whole reason I was trying to upgrade to something nougat based was to get the google assistant working. There appears to be a workaround if you are not a pixel phone listed here. https://forum.xda-developers.com/android/software/guide-how-to-enable-google-assistant-t3477879
Then I started reading and it doesnt appear the g3 is on its list of supported phones for this. Has anyone tried it yet? Does it work, and if so, what technique did you use?
Click to expand...
Click to collapse
You can get Assistant working on the G3... I had it working with AICP and I'm sure it will work with CM but I haven't reinstalled it. The big issue for me was loosing "OK Google" Hotword. I followed the instructions here... https://forum.xda-developers.com/android/apps-games/google-pixel-experience-launcher-dialer-t3478907
Also, if anyone is interested, CrazySuperKernel is working very well with this ROM.... https://forum.xda-developers.com/lg-g3/development/kernel-crazysuperkernel-v1-t3521121
Matteo1219 said:
Also, if anyone is interested, CrazySuperKernel is working very well with this ROM.... https://forum.xda-developers.com/lg-g3/development/kernel-crazysuperkernel-v1-t3521121
Click to expand...
Click to collapse
Thanks, i will give this ROM and Kernel a try once i get my replacement battery
Installed this ROM and so far it is pretty good! Thanks to the dev for the time and effort to put out a good system unlike some of the others who are posting N ROMs that do not work with the phone (ie data, mms, etc). I hope to see further development of this ROM but that might be difficult with CM getting out of the custom OS business.... Great work and thanks again!
len207 said:
Installed this ROM and so far it is pretty good! Thanks to the dev for the time and effort to put out a good system unlike some of the others who are posting N ROMs that do not work with the phone (ie data, mms, etc). I hope to see further development of this ROM but that might be difficult with CM getting out of the custom OS business.... Great work and thanks again!
Click to expand...
Click to collapse
keep an eye on this page, we're supposed to start seeing official builds this weekend (hopefully today)
https://download.lineageos.org/
chat:
https://webchat.freenode.net/?channels=lineageos
The great @Shelnutt2 has continued posting updates for the ls990.... http://downloads.codefi.re/shelnutt2/g3/ls990/laos14_1
I got stuck on "Tap & Go" during setup... Don't have another device to try this and it's not letting me skip it
Matteo1219 said:
The great @Shelnutt2 has continued posting updates for the ls990.... http://downloads.codefi.re/shelnutt2/g3/ls990/laos14_1
Click to expand...
Click to collapse
Is data texting mms working on sprint?? Still domestic roaming issue??
Matteo1219 said:
The great @Shelnutt2 has continued posting updates for the ls990.... http://downloads.codefi.re/shelnutt2/g3/ls990/laos14_1
Click to expand...
Click to collapse
latest vesion of that rom still switches from digital roaming to sprint. i get lte texting on digital roaming and calls on sprint (
erik077 said:
I got stuck on "Tap & Go" during setup... Don't have another device to try this and it's not letting me skip it
Click to expand...
Click to collapse
With a clean install? Which GApps package are you using?
Hi there!
My first Xposed module, InstantFaceUnlock unlocks your phone the moment your face scan is successful. Usually, once the face scan is complete, you then have to swipe up on the lock screen in order to access your phone. InstantFaceUnlock detects when the face scan is complete, and will automatically dismiss the lockscreen for you.
Features:
- Automatically unlock your phone after face scan is successful
- Works on Lollipop, Marshmallow, Nougat and Oreo!
- And Pie (kinda)
- A sexy UI to help you customise
- You can allow notifications to block auto-unlock, and even which *type* of notification
- You can allow music controllers such as the Spotify to block auto-unlock
- Option for your device to vibrate after auto-unlocking, with customisable duration
- Option to add a delay after auto-unlocking
- Easily enable/disable
Update targets:
- Allow only specific apps to block auto-unlock
- That's all I can think of for now - please leave your suggestions below!
(Yes, I've since been informed that GravityBox offers the same functionality. Nonetheless, it's nice to have as a standalone module, in case you don't want gravity box installed).
Download:
http://repo.xposed.info/module/com.samstenner.instantunlock
Source Code:
https://github.com/SamStenner/InstantFaceUnlock
Thanks for taking a look, all feedback is appreciated.
Sam
EDIT [23/01/2018]:
Oreo support is now available, please stop asking :')
EDIT [31/01/19]
Pie support is now available, please stop asking :')
I can't install the apk on miui 8
"there was a problem parsing the parkage" error
ardonhs said:
I can't install the apk on miui 8
"there was a problem parsing the parkage" error
Click to expand...
Click to collapse
Hi, sorry to hear that.
As it says in the description, this mod is really only for AOSP, or stock-like ROMs, so I can't guarantee MIUI 8 will be compatible.
Obviously check that you're rooted and that Xposed is installed. I'd also recommend downloading it via the Xposed Module Manager, rather than pushing the APK.
[This is the first failure of the 238 recorded downloads so far, so it's likely something wrong with your device, rather than the APK]
Let me know what happens.
Thanks,working perfect with latest final RR SDK25 Xposed 88.1
Sent from my Nexus 6 using XDA Labs
So, if I got it right, this does require play services right ?
Pretty good module... I noticed a bug. When I play some music and lock the screen, I need to do extra swipe to unlock the screen. Android version 7.1.2 Xposed 88.1 systemless
SamwiseStenner said:
Hi, sorry to hear that.
As it says in the description, this mod is really only for AOSP, or stock-like ROMs, so I can't guarantee MIUI 8 will be compatible.
Obviously check that you're rooted and that Xposed is installed. I'd also recommend downloading it via the Xposed Module Manager, rather than pushing the APK.
[This is the first failure of the 238 recorded downloads so far, so it's likely something wrong with your device, rather than the APK]
Let me know what happens.
Click to expand...
Click to collapse
Rooted and Xposed installed i download it via Xposed Module Manager but it failed
(My smart lock - face unlock its working)
Anyway thanks for the module
SamwiseStenner said:
Thanks for taking a look, all feedback is appreciated.
Sam
Click to expand...
Click to collapse
Hey bro nice work
Using your module on xposed 88.1 SDK 25 (magisk version by topjohnwu) with Google face unlock on viperos 2.1
Working as described.
I was lucky enough to just open the xposed installer download section a few seconds after you uploaded the module lol.
Btw, any plans to make it open source?
If not, any chance you could make a build with an app UI/activity that gives the option to unlock even when there are notifications?
I seriously don't want to install GBox since it's making my system laggy and I'm just too lazy to make a proper bug report xD
Let us know about open source and the option.
psychoela said:
Thanks,working perfect with latest final RR SDK25 Xposed 88.1
Sent from my Nexus 6 using XDA Labs
Click to expand...
Click to collapse
Awesome, glad you like it!
shadowbone said:
So, if I got it right, this does require play services right ?
Click to expand...
Click to collapse
I guess it just has the same requirements as Smart Unlock has. If smart unlock requires play services, then you'll certainly need that before even thinking about using my module. All my module needs is Xposed to be installed.
Tyuzva said:
Pretty good module... I noticed a bug. When I play some music and lock the screen, I need to do extra swipe to unlock the screen. Android version 7.1.2 Xposed 88.1 systemless
Click to expand...
Click to collapse
Thanks for the feedback! So originally, I had it so it would auto-unlock regardless of what's on the screen. However, I changed it so that if you have notifications on your lock screen, it won't auto-unlock, in case you want to read them; this is why it's not auto-unlocking when you have music playing. I then tried to make it so that if the notifications were non-dismissable (like music) , then it would force unlock anyway. I had trouble implementing that, but I'm going to give it another go today. I may also add options that will let you pick how aggressively you want the auto-unlock to occur. Keep an eye out for updates!
ardonhs said:
Rooted and Xposed installed i download it via Xposed Module Manager but it failed
(My smart lock - face unlock its working)
Anyway thanks for the module
Click to expand...
Click to collapse
That's strange, I guess it's to do with your ROM. Sorry about that.
tanish2k09 said:
Hey bro nice work
Using your module on xposed 88.1 SDK 25 (magisk version by topjohnwu) with Google face unlock on viperos 2.1
Working as described.
I was lucky enough to just open the xposed installer download section a few seconds after you uploaded the module lol.
Btw, any plans to make it open source?
If not, any chance you could make a build with an app UI/activity that gives the option to unlock even when there are notifications?
I seriously don't want to install GBox since it's making my system laggy and I'm just too lazy to make a proper bug report xD
Let us know about open source and the option.
Click to expand...
Click to collapse
Hi, thanks for the positive response!
Yes, I will be working on that today, although I'm very new to this so I'll have to learn how to do it first lol.
I will be uploading all the code to GitHub soon, although I'm completely unfamiliar with it.
Look out for updates within the next few days (an optimistic prediction, might be a week or two!).
Working fine here (just some screen random bugs at the first install boot, but idk if it was caused by the module {my screen glass is broken lol}). Resurrection Remix Nougat 7.1 at osprey.
Suggestion: add an user interface to toogle some functions on and off, like: force unlock when have notifications, force unlock when there are just non-dismisseable notifcations e.g. music player, force unlock when screenlock notification hide sensitive content, etc...
Anyway, Thanks for the module
MarconiGRF said:
Working fine here (just some screen random bugs at the first install boot, but idk if it was caused by the module {my screen glass is broken lol}). Resurrection Remix Nougat 7.1 at osprey.
Suggestion: add an user interface to toogle some functions on and off, like: force unlock when have notifications, force unlock when there are just non-dismisseable notifcations e.g. music player, force unlock when screenlock notification hide sensitive content, etc...
Anyway, Thanks for the module
Click to expand...
Click to collapse
Hey, glad you like it!
It's funny you should suggest that, I've literally just updated the module with basically everything you just described!
Go check it out and let me know what you think!
I hope there will be port for 6.0 android version
Anas Satria said:
I hope there will be port for 6.0 android version
Click to expand...
Click to collapse
Does this not work on Marshmallow? I was under the belief that this works for anything above and including android 5.0 Lolipop. Have you tried to install it and failed?
SamwiseStenner said:
I've just updated the module with basically everything you just described!
Go check it out and let me know what you think!
Click to expand...
Click to collapse
Great! It doesn't look like you're new to it in any way lol.
Btw, hiding launcher icon button would be appreciated, though it's not very necessary.
Edit : btw @SamwiseStenner you didn't tell us about open source... You may take my help if you need assistance with setting up GitHub.
SamwiseStenner said:
Does this not work on Marshmallow? I was under the belief that this works for anything above and including android 5.0 Lolipop. Have you tried to install it and failed?
Click to expand...
Click to collapse
Can you add vibration after unlock the screen would be appreciated.
SamwiseStenner said:
Does this not work on Marshmallow? I was under the belief that this works for anything above and including android 5.0 Lolipop. Have you tried to install it and failed?
Click to expand...
Click to collapse
Well, I got "there was a problem parsing the parkage" error. Tried on Stock 6.0 Galaxy Note4
tanish2k09 said:
Great! It doesn't look like you're new to it in any way lol.
Btw, hiding launcher icon button would be appreciated, though it's not very necessary.
Edit : btw @SamwiseStenner you didn't tell us about open source... You may take my help if you need assistance with setting up GitHub.
Click to expand...
Click to collapse
Haha, thanks! Yeah, I'm just working on a small update at the moment. Once that's pushed, I'll message you
AniketDhoke said:
Can you add vibration after unlock the screen would be appreciated.
Click to expand...
Click to collapse
Good idea, I'll add that now.
Anas Satria said:
Well, I got "there was a problem parsing the parkage" error. Tried on Stock 6.0 Galaxy Note4
Click to expand...
Click to collapse
I'm not sure what the problem is, might be to do with your ROM.
I'm not sure what the problem is, might be to do with your ROM.[/QUOTE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I open the APK androidmanifest, it show minsdk 24 which mean for 7.0. Maybe the problem from this?
SamwiseStenner said:
Good idea, I'll add that now..
Click to expand...
Click to collapse
Make sure you disable that vibration option by default and add an option to enable from GUI.
Lots of people have a custom kernel with some vibration related tweaks and you might not want to conflict them.
Anas Satria said:
View attachment 4303453
When I open the APK androidmanifest, it show minsdk 24 which mean for 7.0. Maybe the problem from this?
Click to expand...
Click to collapse
My apologies, it seems I was only changing the minSDK version in the wrong file. This has now been fixed and will be available in update 1.2, which I'll release in about 10 minutes.
tanish2k09 said:
Make sure you disable that vibration option by default and add an option to enable from GUI.
Lots of people have a custom kernel with some vibration related tweaks and you might not want to conflict them.
Click to expand...
Click to collapse
Yep, that's added to your specification. As above, will be in the next update (ETA, not long!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- debloated but keeping stock experience
- pixel navigation bar
- amazing battery life & performance
- google product sans font
- system-wide blue accent color
- pixel 2 black bootanimation
- pixel 2 sounds
- charging led support
- magisk preinstalled
- various build.prop tweaks
- odexed
- encrypted
Click to expand...
Click to collapse
NRDW_final.zip
vendor.img
recommended kernel - recommended kernel settings (exkm)
recommended launcher
Click to expand...
Click to collapse
pixel 2 mod by @tsoml
Looking forward to flashing thanks for all your time and effort! ?
Doesn't boot on my phone
Exodusche said:
Looking forward to flashing thanks for all your time and effort!
Click to expand...
Click to collapse
Thanks! Hope you like it!
Phyl404 said:
Doesn't boot on my phone
Click to expand...
Click to collapse
Working fine here. Were you on Oreo before flashing?
Como se instala la ROM ?
Thanks for the ROM, Flashing Now....
My Review
ROM is very smooth like stock. Some questions -
How to disable battery light ?
How to enable double tap to wake?
And one request -
Please add pixel navigation bar home button animation.
That's all. And once again, Thanks for the ROM
nardow said:
Thanks! Hope you like it!
Working fine here. Were you on Oreo before flashing?
Click to expand...
Click to collapse
i got it to work after flashing stock img from google and then re-upgrading vendor, bl and radio. Thanks for the good work!
Running this ROM since last night with FrancoKernel. Seems good, I'm a fan of stock and Pixel features so I really like it so far. Good work, and thanks! ?
videotape74 said:
Running this ROM since last night with FrancoKernel. Seems good, I'm a fan of stock and Pixel features so I really like it so far. Good work, and thanks!
Click to expand...
Click to collapse
Glad you liked it!
oceandrama said:
ROM is very smooth like stock. Some questions -
How to disable battery light ?
How to enable double tap to wake?
And one request -
Please add pixel navigation bar home button animation.
That's all. And once again, Thanks for the ROM
Click to expand...
Click to collapse
Thanks! I'll add a variant without battery light on the next update. You can install a custom kernel (such as EX or franco) and enable it. Keep in mind that if you flash a custom kernel you'll have to reinstall magisk. As for the pixel animated navbar, I don't think it's possible on oreo.
Phyl404 said:
i got it to work after flashing stock img from google and then re-upgrading vendor, bl and radio. Thanks for the good work!
Click to expand...
Click to collapse
Nice!
LuisJugo33 said:
Como se instala la ROM ?
Click to expand...
Click to collapse
Install the latest bootloader (optional), vendor & radio images from Google. Reboot to twrp, wipe system, data & cache and then flash the rom.
nardow said:
Thanks! I'll add a variant without battery light on the next update. You can install a custom kernel (such as EX or franco) and enable it. Keep in mind that if you flash a custom kernel you'll have to reinstall magisk. As for the pixel animated navbar, I don't think it's possible on Oreo.
Click to expand...
Click to collapse
Thanks for the Reply. Do you know @cile381. He made Super Xe ROM, and in the custom built of that ROM, There is pixel animated nav bar. Can we take help from that...
And Thanks again, for such a beautiful ROM.
Can't get substratum to work tried different versions of the app. I know in the past pixel features can break subs so maybe its a trade off. I'll try to get a logcat later.
Exodusche said:
Can't get substratum to work tried different versions of the app. I know in the past pixel features can break subs so maybe its a trade off. I'll try to get a logcat later.
Click to expand...
Click to collapse
Use an older gapps problem solved. It's a licensing issue with the plasy store. Use open gapps 06/26 works fine
XMayhem2099 said:
Use an older gapps problem solved. It's a licensing issue with the plasy store. Use open gapps 06/26 works fine
Click to expand...
Click to collapse
It's modified stock firmware so no gapps. ?
Exodusche said:
It's modified stock firmware so no gapps.
Click to expand...
Click to collapse
Ouch you can always try downloading stock open gapps. Haven't tried it on a stock rom before but that's my best solution i can think of.
Exodusche said:
Can't get substratum to work tried different versions of the app. I know in the past pixel features can break subs so maybe its a trade off. I'll try to get a logcat later.
Click to expand...
Click to collapse
I'm pretty sure you're correct, not exactly sure if there are specifics system app wise you can remove to get it to work or not.
Would be nice if there was, or the pixel mods were something that could be incorporated as an aroma or flashable after.
The white kills my eyes.
The smooth and simple and most like stock rom with nice and simple mode .tnx my dear
Exodusche said:
Can't get substratum to work tried different versions of the app. I know in the past pixel features can break subs so maybe its a trade off. I'll try to get a logcat later.
Click to expand...
Click to collapse
XMayhem2099 said:
Use an older gapps problem solved. It's a licensing issue with the plasy store. Use open gapps 06/26 works fine
Click to expand...
Click to collapse
It is indeed an issue with the Play Store.
Exodusche said:
It's modified stock firmware so no gapps.
Click to expand...
Click to collapse
XMayhem2099 said:
Ouch you can always try downloading stock open gapps. Haven't tried it on a stock rom before but that's my best solution i can think of.
Click to expand...
Click to collapse
I almost tested this out earlier today. Had to reflash after restoring a corrupted backup and ended up flash gapps too by mistake. Too bad I didn't try to boot the phone to see if it would work lol.
behzad00 said:
The smooth and simple and most like stock rom with nice and simple mode .tnx my dear
Click to expand...
Click to collapse
Thanks
Lawlrus said:
I'm pretty sure you're correct, not exactly sure if there are specifics system app wise you can remove to get it to work or not.
Would be nice if there was, or the pixel mods were something that could be incorporated as an aroma or flashable after.
The white kills my eyes.
Click to expand...
Click to collapse
I'll make an aroma installer this month
I'm not on playstore version 10.7 so definitely issue with the build. Maybe the modified android framework Cile would know if you have time thanks. ?
Edit: I stand corrected someone update playstore from apkmirror and got subs working.
nardow said:
It is indeed an issue with the Play Store
I'll make an aroma installer this month
Click to expand...
Click to collapse
I mean if you're willing to go through it, then that would be great, I was more or less just spitballing.
As I get older, I'm falling farther away from the custom side of android versus just accepting stock. Meaning I require less features etc to make me happy.
There is a severe lack of stock options for this device with minimal mods, or just debloating and optimizatations. Seems like more common place for people to expect 100+ feature offerings on XDA anymore.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dirty Unicorns Semi GSI for Samsung Devices
By CodeFox & OpenSauce9810
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimized as much as possible for our Samsung Devices.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
UNCOMPRESS IT .xz is a compressed file. So you can uncompress it with zarchiver from the playstore or 7zip/winrar.
Flash the ARH6 Vendor Image to your Vendor Partion from TWRP (Press the Install Image button at the bottom right of where you usually select a flashable zip)
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
03.12.2018
Initial Release
05.12.2018
Updated sources to 9.0 r21 release. (December Security Patch)
Gapps included, (dialer and messenger also included so you won't start without a phone or sms app)
Bootanimation changed to reduce boot times
Tweaks to ambient play ticker so it clears when you clear media notifications
Further performance tweaks thanks to @malinathani animations transition smoother now.
09.12.2018
Keystore fixed - You can now use fingerprint within apps (once you've passed safetynet with hideprops module)
Screenshots
[/YOUTUBE]
Video Review Thanks to @vmb265
Click here to view video review
Downloads:
System Image GDrive
Vendor Image
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
Our telegram also has a bot which will provide you with the latest builds.
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated!
Credits and Thanks
Dirty Unicorns (The best ROM ever)
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani- For the UI Jank Fix (Used widely in other GSI's now)
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
phhusson - thank you for your work on project treble.
XDA:DevDB Information
[Discontinued]Dirty Unicorns[UNOFFICIAL][09.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy Note 9
Contributors
CodeFox, Rainbow_Dash, malinathani, phhusson, Dirty Unicorns, Ivanmeler,
Source Code: https://github.com/DirtyUnicorns/android_manifest
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Vendor ARH6
Based On: Dirty Unicorns
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-12-03
Created 2018-12-03
Last Updated 2019-01-07
First! lol
Still on stock ROM but i'd love to flash some Dirty Unicorn goodness.
Any bugs to be aware of?
PieceofSlice said:
First! lol
Still on stock ROM but i'd love to flash some Dirty Unicorn goodness.
Any bugs to be aware of?
Click to expand...
Click to collapse
Fingerprint doesn't worth within apps. Other than that though everything's pretty much good I think.
@CodeFox Thanks for this rom. I used to make my own Du builds for nexus device. It was sucha an amazing experience.
Would love to try DU for note 9.
Just a couple of questions -
- Does any of the Touch wiz features like, pen related features ( bluetooth control work ) ?
- Phone related features by flashing csc files for specific network still doable ?
Techvir said:
@CodeFox Thanks for this rom. I used to make my own Du builds for nexus device. It was sucha an amazing experience.
Would love to try DU for note 9.
Just a couple of questions -
- Does any of the Touch wiz features like, pen related features ( bluetooth control work ) ?
- Phone related features by flashing csc files for specific network still doable ?
Click to expand...
Click to collapse
Pretty much all Samsung features are lost on AOSP however there are a lot of alternative apps that can "revive" the Spen.
PieceofSlice said:
Pretty much all Samsung features are lost on AOSP however there are a lot of alternative apps that can "revive" the Spen.
Click to expand...
Click to collapse
That is what I thought... Thanks for answering
I flashed this twice. Both times I couldn't get the setup wizard to show up. There are no gapps in the app drawer either.
Can someone confirm? I'm pretty sure I did everything right with the flashing process..
Nasty_z said:
I flashed this twice. Both times I couldn't get the setup wizard to show up. There are no gapps in the app drawer either.
Can someone confirm? I'm pretty sure I did everything right with the flashing process..
Click to expand...
Click to collapse
Gapps aren't included. You'll need to download a package from opengapps. Arm64 9.0. I recommend nano.
Don't forget to download a phone and SMS app too.
I copied and pasted from my PE thread so I need to take out the gapps included part. My bad, sorry about that.
CodeFox said:
Gapps aren't included. You'll need to download a package from opengapps. Arm64 9.0. I recommend nano.
Don't forget to download a phone and SMS app too.
I copied and pasted from my PE thread so I need to take out the gapps included part. My bad, sorry about that.
Click to expand...
Click to collapse
No problem. Also, the .xz file needs to be extracted and the IMG file in it needs to be flashed to the system partition. I noticed you haven't included this in the flashing instructions
Thank you for the ROM btw
Nasty_z said:
No problem. Also, the .xz file needs to be extracted and the IMG file in it needs to be flashed to the system partition. I noticed you haven't included this in the flashing instructions
Thank you for the ROM btw
Click to expand...
Click to collapse
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum ? it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
CodeFox said:
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum ? it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
Click to expand...
Click to collapse
Haha I can understand. Btw I just restored the galaxy wearable, Samsung accessory service, gear s plugin and Samsung health using titanium backup and I didn't have to reset my gear. It just connected right away and it's working fine now. The backup I made using titanium backup was on Pixel Experience right before I flashed this rom.
I hope it doesn't do a freak reset later.. Too good to be true? :silly:
Nasty_z said:
Haha I can understand. Btw I just restored the galaxy wearable, Samsung accessory service, gear s plugin and Samsung health using titanium backup and I didn't have to reset my gear. It just connected right away and it's working fine now. The backup I made using titanium backup was on Pixel Experience right before I flashed this rom.
I hope it doesn't do a freak reset later.. Too good to be true? :silly:
Click to expand...
Click to collapse
Hmm thanks for letting me know. I'll give it a go. I really do need to start using titanium backup more often. I usually have problems with apps not notifying me of new posts anymore or them being stuck in the past though.
CodeFox said:
Hmm thanks for letting me know. I'll give it a go. I really do need to start using titanium backup more often. I usually have problems with apps not notifying me of new posts anymore or them being stuck in the past though.
Click to expand...
Click to collapse
I agree with you on those issues. Apps like whatsapp are affected with the delayed notifications so I avoid backing it up with titanium backup. Still, the fact that Gear doesn't need to be reset is a big thing. I even toggled Bluetooth on and off multiple times and it still connects to it without any prompt for reset
CodeFox said:
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
Click to expand...
Click to collapse
Damn just Flased PixelExperience last night. Will definitely be installing this. I found pe was smooth enough so the fact that this is a lot smoother is really nice. Thanks mate
Nasty_z said:
I agree with you on those issues. Apps like whatsapp are affected with the delayed notifications so I avoid backing it up with titanium backup. Still, the fact that Gear doesn't need to be reset is a big thing. I even toggled Bluetooth on and off multiple times and it still connects to it without any prompt for reset
Click to expand...
Click to collapse
The ability to restore gear with titanium is something new ... I could not do that till very recently but last week when I did a restore, there was no need to reset the watch and I was amazed..
Techvir said:
The ability to restore gear with titanium is something new ... I could not do that till very recently but last week when I did a restore, there was no need to reset the watch and I was amazed..
Click to expand...
Click to collapse
Glad to know it's not just me
New build released. see OP for details.
CodeFox said:
New build released. see OP for details.
Click to expand...
Click to collapse
You're on fire! Thanks
i love dirty so much
great to see this
Hello there. Iam new to. Gsi roms. Needed to ask the flashing steps. Iam on light rom right now with dual sim model.
1. In twrp clear everything. Cache data system
2. Flash vendor image
3. Flash system image
So i was able to boot this rom and everything was working included dual sim. then i downloaded viper for android ,flashed in magisk, restarted and kept in boot loop since.
Image given below. It would be really helpful if someone explained this to me
SimpleNeeds said:
Image given below. It would be really helpful if someone explained this to me
Click to expand...
Click to collapse
You forgot to attach the image.
User699 said:
You forgot to attach the image.
Click to expand...
Click to collapse
Ahh ****... did a split screen for better viewing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SimpleNeeds said:
Ahh ****... did a split screen for better viewingView attachment 5285997
Click to expand...
Click to collapse
There is a problem with API which expired in latest stable Magisk.
Canary Magisk have it fixed. Check here.
Retrial said:
There is a problem with API which expired in latest stable Magisk.
Canary Magisk have it fixed. Check here.
Click to expand...
Click to collapse
So I should install Canary magisk? Damn I installed magisk Canary app and it shows success now.. is that it out should I flash any modules or anything?
SimpleNeeds said:
So I should install Canary magisk? Damn I installed magisk Canary app and it shows success now.. is that it out should I flash any modules or anything?
Click to expand...
Click to collapse
No need to flash anything, just the Canary Magisk app. The issue will get fixed in next Stable release too.
Retrial said:
No need to flash anything, just the Canary Magisk app. The issue will get fixed in next Stable release too.
Click to expand...
Click to collapse
Thanks man... Last doubt (forgive my ignorance for knowledge) magisk Canary is the beta build of OG magisk right? Or is it something different
SimpleNeeds said:
Thanks man... Last doubt (forgive my ignorance for knowledge) magisk Canary is the beta build of OG magisk right? Or is it something different
Click to expand...
Click to collapse
Yeah, something like a "Beta".
Retrial said:
Yeah, something like a "Beta".
Click to expand...
Click to collapse
Got it man....
Heads up ..
Retrial said:
Yeah, something like a "Beta".
Click to expand...
Click to collapse
Bro, now the safety net passes in magisk but fails in the safety net app... What's this?
Device is uncertified in play store.. how do I work this out?
SimpleNeeds said:
Bro, now the safety net passes in magisk but fails in the safety net app... What's this?View attachment 5288865View attachment 5288867
Device is uncertified in play store.. how do I work this out?
Click to expand...
Click to collapse
what ROM do you use?
EDIT: I saw in other thread of yours, you are in Official MIUI, you just unlocked bootloader. Well in Official when u unlock bootloader and stay there the device will say uncertified. You can use other ROM with the "proper changes" build in to have ur device certified. If you wanna stay on Official and have certified your device you need to lock again ur bootloader I guess. OR you can use the module Magisk Hide Props Config.
Retrial said:
what ROM do you use?
EDIT: I saw in other thread of yours, you are in Official MIUI, you just unlocked bootloader. Well in Official when u unlock bootloader and stay there the device will say uncertified. You can use other ROM with the "proper changes" build in to have ur device certified. If you wanna stay on Official and have certified your device you need to lock again ur bootloader I guess. OR you can use the module Magisk Hide Props Config.
Click to expand...
Click to collapse
Yeah did that and it worked...
Scared me once cuz I even thought of locking bootloader and there was this guy who said if you lock the bootloader you can't unlock again and it'll brick lmao. Hey and can you tell me the list of all items you could delete from the root directory. As you know that miui takes up all of root directory's storage space. And I kind of deleted some impo files which included Android system web view(no worries I installed web view canary and now it's working fine lol). I deleted files from system/product/app where there was web view thingy. What's your suggestion?
This is where I deleted the web view folder lol. What do you say?
SimpleNeeds said:
Yeah did that and it worked...
View attachment 5289485View attachment 5289487View attachment 5289489
Scared me once cuz I even thought of locking bootloader and there was this guy who said if you lock the bootloader you can't unlock again and it'll brick lmao. Hey and can you tell me the list of all items you could delete from the root directory. As you know that miui takes up all of root directory's storage space. And I kind of deleted some impo files which included Android system web view(no worries I installed web view canary and now it's working fine lol). I deleted files from system/product/app where there was web view thingy. What's your suggestion?
View attachment 5289491
This is where I deleted the web view folder lol. What do you say?
Click to expand...
Click to collapse
I switched from Official ROM long ago, since MIUI 12 update.
I recommend you to switch in a custom ROM too.
MIUI is bloated, apps running in background send data to chinese servers, privacy nightmare, low battery life, bugs, slow updates in security patches (and I guess no more updates) and with the latest updates they slowed down the performance in purpose. Oh...and still Android 10
Retrial said:
I switched from Official ROM long ago, since MIUI 12 update.
I recommend you to switch in a custom ROM too.
MIUI is bloated, apps running in background send data to chinese servers, privacy nightmare, low battery life, bugs, slow updates in security patches (and I guess no more updates) and with the latest updates they slowed down the performance in purpose. Oh...and still Android 10
Click to expand...
Click to collapse
Same bruh but I'm dying to get the raise to wake and ir as fast as in miui. Do you know of any roms which have Deez? Like just raise the phone and you just teleport to the home screen without triggering the lock screen. I want that quality update but I can't find it anywhere
Edit: hey what if I did some build prop tweaking, can I get the raise to wake?
SimpleNeeds said:
Same bruh but I'm dying to get the raise to wake and ir as fast as in miui. Do you know of any roms which have Deez? Like just raise the phone and you just teleport to the home screen without triggering the lock screen. I want that quality update but I can't find it anywhere
Edit: hey what if I did some build prop tweaking, can I get the raise to wake?
Click to expand...
Click to collapse
I guess ROMs with a lot of customizations such as crDroid, HavocOS, EvoX, Fluid, AEX, etc. may have it. Check their features or ask about it in the proper threads or on their telegrams.
Retrial said:
I switched from Official ROM long ago, since MIUI 12 update.
I recommend you to switch in a custom ROM too.
MIUI is bloated, apps running in background send data to chinese servers, privacy nightmare, low battery life, bugs, slow updates in security patches (and I guess no more updates) and with the latest updates they slowed down the performance in purpose. Oh...and still Android 10
Click to expand...
Click to collapse
Yeah man
Retrial said:
I guess ROMs with a lot of customizations such as crDroid, HavocOS, EvoX, Fluid, AEX, etc. may have it. Check their features or ask about it in the proper threads or on their telegrams.
Click to expand...
Click to collapse
Did check em all but none is as good as in miui.. that's why I bore with the buggies and stupid ass ads and notifs of miui. Cuz that feature was more prioritised for me.. anyways I hopped to pe plus now... Although it isn't there and the ir takes a second, I guess it's worth the shot