TWRP RECOVERY FOR MOTO C PLUS
(Source Build)
I have compiled twrp recovery for moto c plus from source.
LINK for tool :- https://www.androidfilehost.com/?fid=889964283620774903
New updated recovery
TWRP-3.2.1
updated -27/02/2018
Download here
Instructions:-
If you flashed old TWRP then you can flash new twrp directly via old twrp..
otherwise follow inst, given below
The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
[*]1.>> Download and extract files from here
note:after dowloading file..extract it and copy SuperSU-v2.82-201705271822.zip file in ur sd card,,,,DONT FORGET to flash SuperSU-v2.82-201705271822.zip file after write memory ,,otherwise your device will stuck at moto logo or soft brick
[*]2.>>open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
[*]3>>.Load the scatter-file found in the provided file.. select preloader only, and select preloader only..but don't flash it.
[*]4.>> Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
[*]5.>>Click on "window" up there and select "write mode"
[*]6.>> Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP-Moto_C-Plus.img from extracted provided zip file
[*]7. >>Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
[*]8.>>Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
[*]9.>>In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
[*]10.>>After successful flash... hit reboot device..
!!!! Enjoy!!!
credits: @JackShukla (me) for compiling recovery
And all My friends who helped me..
Hit Thanks If You Like My Work..
Device Trees for moto c plus :- https://github.com/DhirajSurvase/android_device_moto_C_plus-XT1721
Kernel Trees for moto c plus:- https://github.com/DhirajSurvase/Kernel_Mod_Moto_C-plus
Vendor Trees For moto c plus:- https://github.com/DhirajSurvase/Vendor_moto_c-plus
Join Telegram Group For Moto C Plus Users
https://t.me/moto_c_plus
XDA:DevDB Information
TWRP-3.2.1 Moto C Plus with locked bootloader-{Guide added}, Tool/Utility for all devices (see above for details)
Contributors
JackShukla
Version Information
Status: Stable
Created 2017-12-29
Last Updated 2018-05-22
Reserved for mah nibba
[email protected]_ said:
Reserved for mah nibba
Click to expand...
Click to collapse
themed<>
will post soon..>
Will this work for the
Moto c plus 1G 16G Model
Build number NRD90M.07 023 ??
Thank you!
haemXD said:
Will this work for the
Moto c plus 1G 16G Model
Build number NRD90M.07 023 ??
Thank you!
Click to expand...
Click to collapse
not sure but it will work...
kernel source is same..<>
try once..
haemXD said:
Will this work for the
Moto c plus 1G 16G Model
Build number NRD90M.07 023 ??
Thank you!
Click to expand...
Click to collapse
flash...
same kernel source..>>
it will work
Thank you for the very quick response! I will let you know if I was lucky.
haemXD said:
Thank you for the very quick response! I will let you know if I was lucky.
Click to expand...
Click to collapse
ohhhoo
JackShukla said:
flash...
same kernel source..>>
it will work
Click to expand...
Click to collapse
It didn't work for me...I got the :
Enable DRAM Failed
Probably because the drivers weren't correctly installed.
I flashed instead the recovery from onejay09 which worked. It may be, because I had the MTK drivers instalked in the meantime.
Anyway thank you for your support.
haemXD said:
It didn't work for me...I got the :
Enable DRAM Failed
Probably because the drivers weren't correctly installed.
I flashed instead the recovery from onejay09 which worked. It may be, because I had the MTK drivers instalked in the meantime.
Anyway thank you for your support.
Click to expand...
Click to collapse
did you followed all procedures??
and use sp tools from your firmware...
just copy bootloader and twrp to your firmware..<>
and follow procedures
haemXD said:
It didn't work for me...I got the :
Enable DRAM Failed
Probably because the drivers weren't correctly installed.
I flashed instead the recovery from onejay09 which worked. It may be, because I had the MTK drivers instalked in the meantime.
Anyway thank you for your support.
Click to expand...
Click to collapse
ohhh..
then flash his recovery..
go to recovery..
select install..
select install image..
select TWRP-3.2.1.img..
select recovery..
hit install..
reboot recovery
haemXD said:
It didn't work for me...I got the :
Enable DRAM Failed
Probably because the drivers weren't correctly installed.
I flashed instead the recovery from onejay09 which worked. It may be, because I had the MTK drivers instalked in the meantime.
Anyway thank you for your support.
Click to expand...
Click to collapse
told you to just upgrade recovery from your old recovery..
no need to flash recovery..
my todays build has not a single bug..
it's happening with you becaus o the sp tool..
either flash my twrp3.2.1 from his twrp..
or just use his sp tool and all stuff just replace twrp.img..
updated twrp
Thanks Dhiraj.i will try and i hope so everything work like before. superb work bro.:laugh::fingers-crossed::good:
rudi021 said:
Thanks Dhiraj.i will try and i hope so everything work like before. superb work bro.:laugh::fingers-crossed::good:
Click to expand...
Click to collapse
thanks
Work for XT1726 thanks!!
---------- Post added at 22:01 ---------- Previous post was at 21:57 ----------
Working on XT1726 thanks bro!!
Revert to stock recovery
Can I use the same way to revert recovery from twrp to stock one ? Thanks.
how can i install the xt1723 drivers?can you give me a link of drivers, please?
armin1256 said:
how can i install the xt1723 drivers?can you give me a link of drivers, please?
Click to expand...
Click to collapse
get moto's official software..
or install any mtk drivers
Hello thank you I made a success in Root of Cplus xt1723 1g16g thanks to you good continuation for the porterage
Related
TWRP FOR ALL SM-G318 SERIES( like SM-G318H or SM-G318MZ or SM-G318HZ )
All credit goes here : http://www.phonandroid.com/forum/galaxy-ace-4-neo-sm-g318h-t142379.html
Press THANK Button if it work for u :good:
(IMPORTANT)Before doing anything u need to:
-HAVE EXACT SAME MODEL (SM-G318 Series Line-up Model) and TO BE ROOTED.
The only way to get root is by flashing the Pre-rooted Firmware by Andro-Man: https://forum.xda-developers.com/android/development/pre-rooted-firmwares-samsung-sm-g318hz-t3230844
Warning!
if u have latest stock rom with "ASKS Security"....before doing any root method,pls downgrade to the older version of stock rom.
How to know if u have "ASKS Security" installed ?
-Go to Settings > About Phone > Find "ASKS Security Version"
If dont have it then u are on the old version of stock rom and can do any root method without any problem.
it is because if u do that u will get stuck on Logo when u boot for example "Galaxy V Plus" because i have sm-g318hz device.
i have experience this problem when i try flashing prerooted rom when i have "ASKS Security" installed on my sm-g318hz.
-Have the USB drivers installed on your computer.
-Have all File Requirement given
-Have a charged battery over 70%.
-Make a backup of your personal data.(Optional just incase)
I DONT RESPONSIBLE FOR ANY DAMAGE TO UR PHONE!! DO IT AT UR OWN RISK !!!!
File Requirement :
For Method 1 (via PC):
Odin : http://androidhost.org/wZgTz
TWRP Recovery : https://drive.google.com/file/d/0B-lRrn2nKLf4TW9iWHNaOXI5bjA/view?pref=2&pli=1
For Method 2 (without PC):
RASHR Flash tool: https://www.apk4fun.com/apk/925/?_e_pi_=7,PAGE_ID10,2769102785
TWRP Recovery: https://mega.nz/#!4NJBDbiB!PXQZ9YYfmo7cb-3zV11Eww7y4bXeFgoV7s8Mn8uNcz4
Method 1:
Installing TWRP Recovery (via PC):
1. Turn off your smartphone.
2. Execute the file Odin3_v3.10.06.exe contained in the unzipped folder.
3. Make sure you have only Auto Reboot and F. Reset Time of checked.
4. Select AP then choose twrp.tar file
5. On your smartphone, press and hold down the Volume Down + Home + Power and Volume Up to restart your smartphone into download mode.
6. Connect the smartphone to the computer with the USB cable of origin. The box below ID: COM should be colored.
7. Click Start to begin the installation.
8. Wait for the installation and do not touch anything until u see Green Light *PASS*
9. Wait for the installation and do not touch anything. Your smartphone automatically restart.
10. Turn Phone ur phone back.
11. Press Power button + Press Volume up button + Home Button to boot into recovery. Release ur finger after u see *Samsung Galaxy *
12. Ignore the message and swipe to right on slider given
13. That it now u have TWRP Recovery installed on your phone :fingers-crossed:
Example Picture for Instruction: http://www.hostingpics.net/viewer.php?id=170738212.jpg
Method 2:
Installing TWRP (without PC):
*If Method 1 is not working try this method.
1. Install RASHR Flash tool.
2. Put recovery.img into root External SD Card.
3. After that open the RASHR Flash tool and select Recovery From Storage.
4. Find and select the recovery.img
5. If the dialog appear press Yes and then reboot into recovery.
6. Wait for few second to reboot into recovery and u have TWRP installed
Nice!??? BTW! It's "TEAM" not "TWIN" ?
xAthenax said:
Nice!������ BTW! It's "TEAM" not "TWIN" ��
Click to expand...
Click to collapse
Sorry for that mistake i never notice that
Thanks for trying my project :good:
This is my first post anyway. So what phone model are you using ?
thnks dev for the recovery. any rom for this phone????
Kikaa99 said:
Sorry for that mistake i never notice that
Thanks for trying my project :good:
This is my first post anyway. So what phone model are you using ?
Click to expand...
Click to collapse
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
guvey said:
thnks dev for the recovery. any rom for this phone????
Click to expand...
Click to collapse
What's the model of your phone? I can search it
xAthenax said:
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
What's the model of your phone? I can search it
Click to expand...
Click to collapse
sm-g318ml
For now , they are still no dev working on custom rom for this model (SM-G318 Series) .
i have try some Galaxy V (SM-G313Hz) custom rom but then i got stuck on boot screen .
i know someone that made a Prerooted stock rom for (SM-G318 Series). u can google it or just search the thread in xda.
xAthenax said:
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
What's the model of your phone? I can search it
Click to expand...
Click to collapse
wow i though it only work for SM-G318 Series only ?
this is impossible ??
guvey said:
sm-g318ml
Click to expand...
Click to collapse
Unfortunately I can't find any custom Roms for your phone
it does not mater what phone model we have.if u found custom for that phone like *Cyanogenmod 12 for SM-G318ML* it also can be apply to all SM-G318 phone series like i mention in my top post.
@Kikaa99 i flashed twrp.tar in odin, it said success but when i try to reboot to recovery i only get the stock recovery
can you help
pipyakas said:
@Kikaa99 i flashed twrp.tar in odin, it said success but when i try to reboot to recovery i only get the stock recovery
can you help
Click to expand...
Click to collapse
Did you follow the steps carefully ?
Most people getting this worked....
Did you try any custom recovery before ?
I want you to reflash the recovery again.
Kikaa99 said:
Did you follow the steps carefully ?
Most people getting this worked....
Did you try any custom recovery before ?
I want you to reflash the recovery again.
Click to expand...
Click to collapse
I tried to reflash a couple of times, but it didnt work
Then i flash a pre-rooted firmware, extract the recovery.img and flash it via flashfire, then i got twrp
Now that i got a way to get root + twrp everything is fine but not the way i thought though
pipyakas said:
I tried to reflash a couple of times, but it didnt work
Then i flash a pre-rooted firmware, extract the recovery.img and flash it via flashfire, then i got twrp
Now that i got a way to get root + twrp everything is fine but not the way i thought though
Click to expand...
Click to collapse
Glad to hear that mate
Guys, pls share this post to all SM-G318 User :good:
Sharing is caring
Hi guys! Anyone having troubles with wifi? It just doesn't turn on...model sm-g318
Adlxcrash said:
Hi guys! Anyone having troubles with wifi? It just doesn't turn on...model sm-g318
Click to expand...
Click to collapse
do u having this problem after try this tutorial ?
and what actually ur phone model ?
i mean we have a lot sm-g318 series (like SM-G318HZ OR SM-G318MZ)
Kikaa99 said:
do u having this problem after try this tutorial ?
and what actually ur phone model ?
i mean we have a lot sm-g318 series (like SM-G318HZ OR SM-G318MZ)
Click to expand...
Click to collapse
Thanks but I gave up... I think it must be a hardware problem .... twrp works excellent so.. it may be another thing like wifi module in the board... thanks anyway mate!
Works on SM-G318ML?
Hi I have a question, does it work for the SM-G318ML?
*Sorry my english is very bad xD
NecroMacro said:
Hi I have a question, does it work for the SM-G318ML?
*Sorry my english is very bad xD
Click to expand...
Click to collapse
Root worked for me, so TWRP should work too.
Enviado de meu SM-A9000 usando Tapatalk
I have SM-G318HZ
I follow your instruction in ODIN
but twrp is not installed.
it still gives me the stock recovery.
any idea?
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Deadman jo said:
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Click to expand...
Click to collapse
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
i need HCL me connect 3G 2.0tabs Stock recovery
Deadman jo said:
i need HCL me connect 3G 2.0tabs Stock recovery
Click to expand...
Click to collapse
Stock recovery should be included in the stock rom package unless you mean custom recovery.
MigoMujahid said:
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
Click to expand...
Click to collapse
Bro i cant flash this rom on sp flash tool
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
As far as i know, you use mp tool not sp flash tool.
http://hulkload.com/pjj60j5hx6mt
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
this rom only flash with stock recovery im lost my stock recovery..
Flash with Digma iDND7 firmware.
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
I have one but the file is locked ... since a year now
Also I tried flashing the stock rom gives this error :
Error: Invalid partition setting
17: fat 979e8000:84de8000
installation aborted
Please help or suggest
++++++++++++++++++++++++++++++++++++
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
So there is an update I was able to successfully Flash a firmware from same board which was used by HCL me connect 3G 2.0.
I searched this for 3 days and found that Digma idnd 7 tab used the same board , so I hunted for Digma firmware and luckily got them, the file link contains both ota and Flash file via MP tool.
I tried ota update but I got the same error.
So I used MP flash tool v5.1352.01
Download adb drivers of HCL me tablet.
Extract the zip, then edit the scatter file name to "MT6577_Android_scatter_emmc".
Now open SP flash tool and choose the scatter.
Click on download and then plug the tab in using the USB.
Then I got some PMT file needs to be updated error which was fixed by the next step.
Stop the download, pull the device out, then click Format options in the 2nd tab and then "Format except Bootloader".
Plug the device in.
once the format is done, plug out again, click download(make sure scatter is selected).
Plug in the device.
It will start flashing.
File links :
HCL USB drivers : androidmtkDOTcom/download-hcl-usb-driver
SP flash links : androidmtkDOTcom/smart-phone-flash-tool
Digma original firmware : Unable to post link so : use google and search supportdotdigma
ps: may be this helps digmaDOTru/catalog/item/1344
Also you will need to change the language to English after Booting up.
Click on the equalizer>> click on icon marked A[use some common sense that's what I did xD] then inside that tap on the very , top of the submenu, you will get the option to change to English.
Please let me know if if works for you. Or you need any thing.
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
My phone also f1s.
Did you had any rom-package or recovery.img?
onkarrathee said:
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
Click to expand...
Click to collapse
Try using this guide
https://forum.xda-developers.com/android/software/guide-how-to-compile-twrp-source-step-t3404024
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download it from here
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used twrp recovery of Le 2 x526.
i'm not a developer but it would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
onkarrathee said:
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download them from there http://www.needrom.com/download/lyf-ls-5201/#
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used stock recovery of Le 2 x526.
i'm not a developer but i would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
Click to expand...
Click to collapse
Good job !
How to flash stock firmware to LYF water F1s Ls-5201
Prepare your system-----
1) Install the Qualcomm usb drivers on your system. Download link
2) Check your PC device manager, your phone should be detected in "Qualcomm HS-USB QDloader 9008" mode. It must detect to start the process.
3) Download the stock firmware from here . The software version downloaded with this link is "LS-5201-S10A_LYF_L13EN_200_170124_09-55-13".
4) Extract the downloaded firmware zip to an folder and rename the "IMAGES_FOR_QMSCT" to "firmware".
5) Download & install the QPST tool. Google it you can find it easily.
6) power off your phone & Make sure your device is charged to at least 50%.
7) Run the installed QFIL from installed programmes. Browse in programmer path to the "prog_emmc_firehose_8976_ddr.mbn" file in the folder where firmware is extracted. It will load the firmware & buid will be selected automatically.
8) Click on load xml and select the "rawprogram_unsparse_without_qcn.xml" if you havn't the backup of NV partition of your device.
If you have the backup NV partition of your device than you can select "rawprogram_unsparse.xml" because this will erase your RF Calibration data, IMEI and WiFi/Bluetooth Address etc. and you will have to restore the NV partition after installing the ROM.
I would suggest you to select "rawprogram_unsparse_without_qcn.xml" & keep it simple.
9) Choose the "patch0.xml" after that.
10) Hold the vol+ & vol- key together and plug usb cable to phone to enter into download mode. As you plug in the QPST tool would recognise your device in QDLoader 9008 mode with com port no. and download button will get activated.
11) Click the download button and sit back, it will take some time.
12) "finish dowload" appear, when process got completed and phone will reboot automatically.
13) Disconnect the device from PC one "android screen" appears (usually it takes 5 min. to appear LYF logo screen from android boot screen)
14) If doesn't reboots, there is some problem & get ready for real hard work .
You might have bricked. In this case just press the power button so than it can power ON. If android screen appears you are lucky enough
-----If android screen remains more than 6-8 minute, you are in bootloop. (It useually takes 5 min for LYF logo to appear after android logo)
-----To switch off your device in case of bootloop, press vol+, vol- & power key together for some time. It will switch off.
-----try to flash the firmware again by above process.
I have tested this method on my device and successfully flashed the stock firmware.
Don't forget to "HIT thanks"...!!!
Credit:
@[email protected] for providing the stock firmware
Me: for testing the procedure
Le2 not support MicroSd.
I will try use recovery of oppo R9plus.
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/open?id=0BwVjewgp3fvLbmtxZ21fSUZhOW8
Or download full package with flash tools and supersu.zip [URL="https://drive.google.com/open?id=0BwVjewgp3fvLUnRHS3NGRjlIRTQ]TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar[/URL]
TWRP recovery LYF_LS-5201
Guys... here is the unofficial twrp recovery for LS-5201. Download it here .
Let me know that you suceed..
This is twrp_unofficial_3.1.0.0 ported from Leeco Le2's TWRP recovery using @suraj-b method and if anythong goes wrong on your device download the stock recovery from the thread and flash it from bootloader.
Try on your own risk..!! :fingers-crossed:
Don't forget to HIT "Thnanks" down there
Please share the adb & fastboot files you used for unloacking bootloader and flashing recovery for the noobs. It would help.
keep it up. :good:
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
If i flash it via fastboot...den can i root it through twrp...
prashant.palange said:
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
If i flash it via fastboot...den can i root it through twrp...
Click to expand...
Click to collapse
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
zjsss said:
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
Click to expand...
Click to collapse
Bro but is it proper twrp for f1s...hv u try it
prashant.palange said:
Bro but is it proper twrp for f1s...hv u try it
Click to expand...
Click to collapse
It works well on my phone.
zjsss said:
It works well on my phone.
Click to expand...
Click to collapse
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
prashant.palange said:
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
Click to expand...
Click to collapse
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
zjsss said:
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
Click to expand...
Click to collapse
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
prashant.palange said:
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
Click to expand...
Click to collapse
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
zjsss said:
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
Click to expand...
Click to collapse
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
prashant.palange said:
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
Click to expand...
Click to collapse
It doesn't matter of wipe /date or wipe 3.
I guess because the phone kernel was rooted.TWRP had right of wipe.
But not so sure that.
i tried KingRoot,KnigoRoot,vRoot,Root Genius,framaroot, LG One Click Root ( Both Android and pc version ) but still cant root k130e. so how can i root this device?
is this device have TWRP or other Custom Recovery for flash it and then use SuperSu.zip for root?
no ppl have solution for this? i have an k4 m160 lg device, maybe the solution is the same.
Flash only Boot.Img of other KDZ
See This link:
https://forum.xda-developers.com/an...g-k4-k120e-prerooted-stock-rom-t3545353/page5
Last Page. maybee this Helps You out.
download attachment file
https://drive.google.com/file/d/1oynYRQHgl8YpKz4U7hXl4JbbJpeaiN0o/view?usp=sharing
run SP FLASHTOOL version SP_Flash_Tool_v5.1548_Win
select MT6735M_Android_scatter_twrp.txt
and let all file by default
select download only and flash in MTk mode (turn off the phone conect usb and start flash)
after boot phone into system
reboot in recovery mode with adb reboot recovery command
install supersu.zip or magisk with twrp
all done
it tested by me in many lg k4 (k130E) 100% WORK
Hit Thanks
mosirezaei said:
download attachment file
https://drive.google.com/file/d/1oynYRQHgl8YpKz4U7hXl4JbbJpeaiN0o/view?usp=sharing
Click to expand...
Click to collapse
The link requires signing in...
Mediafire Link
CXZa said:
The link requires signing in...
Click to expand...
Click to collapse
Try This one in mediafire
http://www.mediafire.com/file/4ripfjhqs8fkt55/K130E_twrp%2Broot.rar/file
donf forget post result and hit thanks if it worked
enjoy