Solution to j327P (Sprint Variant) FRP bootloop - Samsung Galaxy J3 (2016) Guides, News, & Discussio

If you Have accidentally disabled Developer options and your phone was rooted, you probably went into a bootloop, and you think the only solution is a full odin restore, bu thats not true, there is an odin flashable package that allows you to bypass the FRP custom image block message and lets you boot into the os, from there enable oem unlocking, and reroot your device with supersu. I will attach the odin flashable below for those who need it.

crimsonrommer said:
If you Have accidentally disabled Developer options and your phone was rooted, you probably went into a bootloop, and you think the only solution is a full odin restore, bu thats not true, there is an odin flashable package that allows you to bypass the FRP custom image block message and lets you boot into the os, from there enable oem unlocking, and reroot your device with supersu. I will attach the odin flashable below for those who need it.
Click to expand...
Click to collapse
thanks, it worked for me. appreciate.

Your welcome.

What did u even use to root?

What build is this for?

It works with me....Thank you so much.

this works also on 320fn?

fraizzo said:
this works also on 320fn?
Click to expand...
Click to collapse
Sadly not

JustAnotherAndroid said:
What did u even use to root?
Click to expand...
Click to collapse
I used magisk

Sands207 said:
What build is this for?
Click to expand...
Click to collapse
I don't remember

Is this process can unlock the phone from sprint ?

No, call sprint, then ask to unlock

crimsonrommer said:
If you Have accidentally disabled Developer options and your phone was rooted, you probably went into a bootloop, and you think the only solution is a full odin restore, bu thats not true, there is an odin flashable package that allows you to bypass the FRP custom image block message and lets you boot into the os, from there enable oem unlocking, and reroot your device with supersu. I will attach the odin flashable below for those who need it.
Click to expand...
Click to collapse
Simply turning off usb debugging will not throw your phone into a boot loop normally unless ou had some bad hardware or custom settings.. Only time ive seen that happen is by using data from other models. Easy way to get past it is to just take out your battery for a bit, replace it then boot into upload mode. Next youll have to try various combos releasing the buttons and presing again quickly to get back to the download mode. Alternatively boot into TWRP/STock recovery, use AT+ Commands or use a application that will boot back.
Awesome you found a little trick to simplify it ! Keep it up!
EDIT: Ohh i see.. you are on a custom rom / binary? I still have yet to have this happen but to a J700 with SynexOS on it.. Ill give this a try.

Related

Urgent help needed: Sm-g360az bricked

Hello....i rooted my sm-g360az samsung phone and when i restarted the phone, it didn't boot up to the home screen. It shows the samsung logo and then becomes blank....i later on came to know on the internet that i hadnt enabled 'oem unlock' on 'developer options' before rooting. I sent the phone to samsung for repair and they sent it back to me today saying that the phone is beyond repair because it was rooted, though i hadnt mentioned to them that i had rooted the phone. How do i get my phone to work again? I need it very badly for work purposes. Can somebody help me with this....
You need to flash stock rom for your device via odin.
røbin said:
you need to flash stock rom for your device via odin.
Click to expand...
Click to collapse
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
alvcross said:
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
Click to expand...
Click to collapse
It is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 Did you visited this page?
røbin said:
it is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 did you visited this page?
Click to expand...
Click to collapse
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
alvcross said:
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
Click to expand...
Click to collapse
https://samsung-firmware.org/model/SM-G361F/ both device have same spec.So you can try this version.
røbin said:
https://samsung-firmware.org/model/sm-g361f/ both device have same spec.so you can try this version.
Click to expand...
Click to collapse
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
alvcross said:
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
Click to expand...
Click to collapse
Can't 100% guarantee you that it will work or not.Both device have same spec so it should work but one have 2mp font camera and other have 1.9mp camera. It shouldn't be a big problem I think.
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
alvcross said:
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
Click to expand...
Click to collapse
All the version are same.Those files are from different region. So you can choose any region.but download lte version only.
røbin said:
all the version are same.those files are from different region. So you can choose any region.but download lte version only.
Click to expand...
Click to collapse
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
alvcross said:
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
Click to expand...
Click to collapse
Don't just say thanks.Hit the thanks button If you thik I helped you
røbin said:
don't just say thanks.hit the thanks button if you thik i helped you
Click to expand...
Click to collapse
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
alvcross said:
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
Click to expand...
Click to collapse
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Røbin said:
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Click to expand...
Click to collapse
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
alvcross said:
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
Click to expand...
Click to collapse
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Røbin said:
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Click to expand...
Click to collapse
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
alvcross said:
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
Click to expand...
Click to collapse
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Røbin said:
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Click to expand...
Click to collapse
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
alvcross said:
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
Click to expand...
Click to collapse
Why do you need stock recovery?There's no stock recovery available for your device.Try to instell different twrp version for your phone.

How to root samsung device without getting custom binary blocked by frp error

Hey there
I hadd my j5 500fn version for a month its on android lollipop 5.1.1
I tried to root it yesterday and it wasnt that nice
I tried rooting by removing google account and enable usb debugging mode and rooted using the odin method with cf root file
As soon as it finished it rebooted with a yellow "set warranty bit:kernel" message on left top of the device name and it all went fine and root checker said it was rooted and could use all root apps but then i tried adding the google account again and restarted my device and then got the custom binary blocked by frp error
I solved that error by flashing the official stock rom again and then i tried rooting again and got the same problem again
It seems like i cant root with a google account and without it i cant install any google play apps
Any suggestion???
Amir3022 said:
Hey there
I hadd my j5 500fn version for a month its on android lollipop 5.1.1
I tried to root it yesterday and it wasnt that nice
I tried rooting by removing google account and enable usb debugging mode and rooted using the odin method with cf root file
As soon as it finished it rebooted with a yellow "set warranty bit:kernel" message on left top of the device name and it all went fine and root checker said it was rooted and could use all root apps but then i tried adding the google account again and restarted my device and then got the custom binary blocked by frp error
I solved that error by flashing the official stock rom again and then i tried rooting again and got the same problem again
It seems like i cant root with a google account and without it i cant install any google play apps
Any suggestion???
Click to expand...
Click to collapse
Hey any help would be appreciated there many apps i use which require root
Hey there any help ??!
Have you enabled OEM Unlocking in Developer Options?
I didnt check that
Al i tried was removing my google account and enabling usb debugging
es0tericcha0s said:
Have you enabled OEM Unlocking in Developer Options?
Click to expand...
Click to collapse
I would try that but ate there any risks of unrepairable bricks or boot loops ??
Amir3022 said:
I would try that but ate there any risks of unrepairable bricks or boot loops ??
Click to expand...
Click to collapse
Not from enabling that option, no.
es0tericcha0s said:
Not from enabling that option, no.
Click to expand...
Click to collapse
So di you suggest teying to root with oem disabled??
?
The question was whether you have enabled OEM unlocking in the development options. If your phone has this option, it must be enabled for you to load a custom recovery that's used with auto root to root, and then it will flash back the original recovery.
es0tericcha0s said:
?
The question was whether you have enabled OEM unlocking in the development options. If your phone has this option, it must be enabled for you to load a custom recovery that's used with auto root to root, and then it will flash back the original recovery.
Click to expand...
Click to collapse
Ok i will try that and tell you the results
es0tericcha0s said:
?
The question was whether you have enabled OEM unlocking in the development options. If your phone has this option, it must be enabled for you to load a custom recovery that's used with auto root to root, and then it will flash back the original recovery.
Click to expand...
Click to collapse
I just tried rooting with oem enabled but its the same still getting the yellow set bit warranty:kernel message on startup
Amir3022 said:
I just tried rooting with oem enabled but its the same still getting the yellow set bit warranty:kernel message on startup
Click to expand...
Click to collapse
That part doesn't mean anything. Does root still work?
es0tericcha0s said:
That part doesn't mean anything. Does root still work?
Click to expand...
Click to collapse
It works but as soon as i enter my google account and restart i get the blocked by frp error
Odd. I've rooted dozens of Samsung phones and have not come across this. If you are already logged into Google and then enable OEM unlocking and then root, does it still get blocked?
es0tericcha0s said:
Odd. I've rooted dozens of Samsung phones and have not come across this. If you are already logged into Google and then enable OEM unlocking and then root, does it still get blocked?
Click to expand...
Click to collapse
If i try rooting without removing my google account i get ared failed message while rooting with odin
I also realised that knox flag is tripped at 0x1 could that be tbe problem
Please post a link to the guide you are using.
es0tericcha0s said:
Please post a link to the guide you are using.
Click to expand...
Click to collapse
I dont use a guide to do it i just tried this same method on my old j1 and it worked but ut doesnt seem to work here
Here it is:
Remove google account
Enable oem unlock
Turn off mobile and put it on download mode
Flash the cf auto root with odin
Mobile turns on and it root automatically then reboots
A yellow set bit warranty: kernel message in top of the screen
Until now all is fine root works fine and all but as soon as i enter my google account and reboot i get the custom binary blocked by frp error and have to reflash the official rom again to get it to work
Amir3022 said:
I dont use a guide to do it i just tried this same method on my old j1 and it worked but ut doesnt seem to work here
Here it is:
Remove google account
Enable oem unlock
Turn off mobile and put it on download mode
Flash the cf auto root with odin
Mobile turns on and it root automatically then reboots
A yellow set bit warranty: kernel message in top of the screen
Until now all is fine root works fine and all but as soon as i enter my google account and reboot i get the custom binary blocked by frp error and have to reflash the official rom again to get it to work
Click to expand...
Click to collapse
You might not be using the right CF package. Just try TWRP + SuperSU zip method instead.
es0tericcha0s said:
You might not be using the right CF package. Just try TWRP + SuperSU zip method instead.
Click to expand...
Click to collapse
I will tey to search for a guide to that method and tell you the results
http://forum.xda-developers.com/gal...overy-twrp-2-8-7-0-samsung-galaxy-j5-t3219901
http://download.chainfire.eu/supersu-stable
Make sure to boot into TWRP before it boots into the OS to flash SuperSU.

New TWRP Recovery Multi Tool zl0-LEX722

Multiple Tool Flash Recovery Check and unlock Bootloader
Download unzip somewhere inside PC and run with double click the Recovery-Tool.bat .
Follow instructions and check Bootloader Unlock *flash TWRP or Stock Recovery etc. Try it with your own responsibility.
Alternative you can put new TWRPS inside phone and Flash them through there as image files.
https://drive.google.com/file/d/1O3BgtajkXBT43pQBn66LeJ45G7tb_f5_/view?usp=sharing
Great ¡¡¡
Many thanks
Unlock stock 26s too?
dakok said:
Unlock stock 26s too?
Click to expand...
Click to collapse
Not yet..in the future..
senks bro
what does this do? And what does it mean for useage?
gaatjesprikker said:
what does this do? And what does it mean for useage?
Click to expand...
Click to collapse
Because I realized that you don't know.. so...with check bootloader tool you find out if your bootloader is locked or unlocked and you could proceed with safety to flash custom recovery to have the full abilities of this phone at your hands. Because if you try to flash any other Rom with locked bootloader you can have a full brick. And the second is that you have the power to choose between 2 recovery's or to flash back with 2 click's the official Stock recovery to have it if and when some Nougat or else Rom came out.
Doesn't work
Good day! Tried your program on my phone (5.8.020S, bought at jd.com) - doesn't work. USB debugging is on. Phone turned on in fastboot mode.
As a new user I can't post links to screenshots, may be I will send you a private message?
voldemaar said:
Good day! Tried your program on my phone (5.8.020S, bought at jd.com) - doesn't work. USB debugging is on. Phone turned on in fastboot mode.
As a new user I can't post links to screenshots, may be I will send you a private message?
Click to expand...
Click to collapse
Nothing is wrong. You just have locked your bootloader without permission to unlock. Did you put 26s with TWRP? THAT'S WHY. You must have stock locked allowed bootloader for unlock.
Great work !
Everything working well !
f2fs
If it possible to made f2fs working in recovery?
LordGiborg said:
If it possible to made f2fs working in recovery?
Click to expand...
Click to collapse
Search at BBS.le I think there is a custom with f2fs support.
CrisBalGreece said:
Search at BBS.le I think there is a custom with f2fs support.
Click to expand...
Click to collapse
Thx for your advise.
But it's really hard to find something there, and page loading sooooooooooo slow...
Thread closed on OP's request

Question [SOLVED] Cant get into my tablet because of "Can't create work profile because policy prevents custom os"

***UPDATE***
To anyone who comes across this, I fixed the issue by following a guide by @AddictedA1 on this post . Note that your case might be different as in you might be locked out of device and unable to change OEM lock from settings. This was the case with me so I just follwed the FRP/Knox bypass guide, accessed settings, enabled OEM unlocking and the proceeded with the above guide.
If you have any questions then just message me.
***************
So today we were given Samsung Galaxy Tab A7 lites by our state government for promoting technology in the state (elections in a few months go figure).
The issue was that it comes with knox which has government agency as the admin.
I tried rooting by flashing magisk flashed AP following this guide (for samsung galaxy tab A7) but now after startup it asks me to connect to the Internet and, runs a few checks and says "cant create work profile because security policy prevents this on a custom os".
It's just stuck at that message and can't get out of there.
I've never had any Samsung device before so I might be doing something wrong. Any help on how to get out of this is appreciated. Thanks
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
alp47470 said:
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
Click to expand...
Click to collapse
same here bro yogiji , Knox is inside samsung cant get it out by adb , safemode, cant root magisk . Only option left flash twrp install lineage os.. but cant find exact twrp model tar one gta7lite .. any idea ?
AddictedA1 said:
same here bro yogiji , Knox is inside samsung cant get it out by adb , safemode, cant root magisk . Only option left flash twrp install lineage os.. but cant find exact twrp model tar one gta7lite .. any idea ?
Click to expand...
Click to collapse
Sorry, I couldn't find any TWRP so far. If i do will surely let you knoww.
alp47470 said:
Sorry, I couldn't find any TWRP so far. If i do will surely let you knoww.
Click to expand...
Click to collapse
Im trying to port TWRP , hopefully something will work main thing is configuring fstab right partitions
AddictedA1 said:
Im trying to port TWRP , hopefully something will work main thing is configuring fstab right partitions
Click to expand...
Click to collapse
That's great new. Good Luck ;-)
alp47470 said:
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
Click to expand...
Click to collapse
Hey can you share the link to download the firmware please
Insomniac05 said:
Hey can you share the link to download the firmware please
Click to expand...
Click to collapse
samfw site put exact name then select country
AddictedA1 said:
samfw site put exact name then select country
Click to expand...
Click to collapse
thanks man i'll see if i can get it to boot back with the flash
alp47470 said:
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
Click to expand...
Click to collapse
didn't work for me unfortunately
still shows the same can't create work profile
o
Insomniac05 said:
didn't work for me unfortunately
still shows the same can't create work profile
Click to expand...
Click to collapse
of course it will not work cause knox app is inside stock samsung os it will connect to internet and get to know
Im trying Magisk method it will work 80% confident by patching os file. will update soon.... building twrp mehod is not working is on hold.
AddictedA1 said:
o
of course it will not work cause knox app in inste stock samsung os it will connect to internet and get to know
Click to expand...
Click to collapse
Yeah I know Knox is a part of the os the dude did say his worked so I gave it a go
AddictedA1 said:
Im trying Magisk method it will work 80% confident by patching os file. will update soon.... building twrp mehod is not working is on hold.
Click to expand...
Click to collapse
U mean patching the ap file??
Insomniac05 said:
U mean patching the ap file??
Click to expand...
Click to collapse
yeh
AddictedA1 said:
yeh
Click to expand...
Click to collapse
Tried doing it that's what tripped knox for me unfortunately
I have tried flashing after patching the AP file with magisk and it still didn't work.
It's knox which is the issue. It'll only work If someone can remove knox successfully and please update here if you do so. Thanks
AddictedA1 said:
o
of course it will not work cause knox app is inside stock samsung os it will connect to internet and get to know
Click to expand...
Click to collapse
Insomniac05 said:
Hey can you share the link to download the firmware please
Click to expand...
Click to collapse
The Knox app only stop booting if it detects that bootloader was unlocked or somtheing of similar nature. You can go back to your old state by relocking and flashing stock fw.
i made a quick guide, hope it helps
FIX - "Can't create work profile because policy prevents custom OS"
Samsung Galaxy Tab A7 Lite was distributed by our state government for promoting technology in the state. (JUST ELECTION THINGS) Anyways, the Tabs are coming with Samsung Knox security which cannot be uninstalled, disabled, debloated with adb...
forum.xda-developers.com
Somebody get help or asked some experience in XDA to make a TWRP port for this device or else forget privacy in this.
LADIES AND GENTLEMEN I HAVE SUCCESSFULLY REMOVED KNOX FROM SAMSUNG OS AND WITH NEW WALLAPER LOOKS HEAVEN )))))

How To Guide FIX - "Can't create work profile because policy prevents custom OS"

Samsung Galaxy Tab A7 Lite was distributed by our state government for promoting technology in the state. (JUST ELECTION THINGS)
Anyways, the Tabs are coming with Samsung Knox security which cannot be uninstalled, disabled, debloated with adb. The Tabs also come with restrictions by software to change wallpaper of lockscreen / homescreen and probably many other restrictions. (tracking and other stuffs) ALTHOUGH I MANAGED TO REMOVE THE WALLPAPER RESTRICTION (Screenshot attached) The Tab also comes with a work profile already by Govt.
The problem is that if you try to unlock the bootloader you can't boot by to the system because of the policies enrolled with the each device specifically. As of now i couldn't find any TWRP or any Custom ROM to flash and fix those things or ROOT or at least try to. Please hit me up if any development comes for the same.
[ THIS IS A TUTORIAL TO BRING BACK THE TAB TO YOUR OLD STATE ]
Now on to the steps to fix :
STEPS :
1. Lock bootloader by going to download mode (turn off the device, press both vol keys and connect USB untill the blue screen (download mode) pops up), then follow the menu.
2. Flash stock Firmware. After booting setup as usual and that's it. You should be back to your original state.
3. Force reboot to stock recovery and format data/erase data after flashing stock firware. (this setp is IMP if the step 1&2 didn't work alone)
Enjoy YogiJi's Smile FACE
LINKS :
Firmware [ SM-T225_INS_T225XXU1AUI3 ]
ODIN
Samsung Drivers
My bootloader is probably locked coz the download mode does say OEM lock on
However even after flashing it with the stock firmwares I tried AUI3 and AUJ1 for the Indian region still can't seem to get past that issue
-_-
Yup flashed again and still the same
Insomniac05 said:
Yup flashed again and still the same
Click to expand...
Click to collapse
lock your bootloader again OEM
AddictedA1 said:
lock your bootloader again OEM
Click to expand...
Click to collapse
Again? How? like it's locked already I don't get the option to open the boot lock menu in the download mode nor the pop up saying that it is unlocked
Insomniac05 said:
Again? How? like it's locked already I don't get the option to open the boot lock menu in the download mode nor the pop up saying that it is unlocked
Click to expand...
Click to collapse
knox saying cant create profile means its detected OEM unlocked so... poweroff hold volume up+down then plugin cable after few sec warning appear second option press volume up longer then lock bootloder option will come..... again boot enjoy yogi n F privacy
AddictedA1 said:
knox saying cant create profile means its detected OEM unlocked so... poweroff hold volume up+down then plugin cable after few sec warning appear second option press volume up longer then lock bootloder option will come..... again boot enjoy yogi n F privacy
Click to expand...
Click to collapse
I don't have that option to press the volume up button longer and go into the boot lock menu coz the loader is already locked as shown in the download mode
Insomniac05 said:
I don't have that option to press the volume up button longer and go into the boot lock menu coz the loader is already locked as shown in the download mode
Click to expand...
Click to collapse
If your bootloader is locked (Be sure) then perform a factory reset once, via stock recovery. That should solve your issue.
For further help you can text me on TG - https://t.me/fastboot_boot_life
Insomniac05 said:
My bootloader is probably locked coz the download mode does say OEM lock on
However even after flashing it with the stock firmwares I tried AUI3 and AUJ1 for the Indian region still can't seem to get past that issue
Click to expand...
Click to collapse
buddy sorry to be a bearer of bad news but your warranty is void (CHECK WARRANTY VOID 0X01), knox is preventing you from booting up. It can't be fixed by installing stock firmware. Either go to service centre (they might not accept the device due to its warranty status but if there is a way then they might take cash to fix it)
else wait for some other firmware and twrp. that's the only way
alp47470 said:
If your bootloader is locked (Be sure) then perform a factory reset once, via stock recovery. That should solve your issue.
For further help you can text me on TG - https://t.me/fastboot_boot_life
Click to expand...
Click to collapse
have you ever tried flashing stock firmware to your device?
starkprime74 said:
have you ever tried flashing stock firmware to your device?
Click to expand...
Click to collapse
It show warranty void etc in mine too after i unlocked bootloader probably because it's samsung's policy unlike other brands like OnePlus. After flashing stock fw and a factory reset via stock recovery you can boot back to previous state. Factory reset is important because because just locking the bootloader isn't completing wiping out system and when you boot back you can see previous WiFi already connected. That's why factory reset via recovery is important.
Insomniac05 said:
I don't have that option to press the volume up button longer and go into the boot lock menu coz the loader is already locked as shown in the download mode
Click to expand...
Click to collapse
Fixed now??
alp47470 said:
Fixed now??
Click to expand...
Click to collapse
Nope unfortunately not
Here's what I did
Reset the device
Entered Download Mode (bootloader is locked for sure)
Flashed using Odin
Reset the device again
And still the same
Also did ur issue just start coz of unlocking?? I did flash a magisk patched AP as well
Insomniac05 said:
Nope unfortunately not
Here's what I did
Reset the device
Entered Download Mode (bootloader is locked for sure)
Flashed using Odin
Reset the device again
And still the same
Also did ur issue just start coz of unlocking?? I did flash a magisk patched AP as well
Click to expand...
Click to collapse
Bro. Why aren't you doing a factory reset AFTER flashing stock FW? Factory reset after flashing stock is IMP. Check OP instructions
alp47470 said:
Bro. Why aren't you doing a factory reset AFTER flashing stock FW? Factory reset after flashing stock is IMP. Check OP instructions
Click to expand...
Click to collapse
I did man
I even wrote "Reset the device again" after "Flashed using Odin"
Insomniac05 said:
Nope unfortunately not
Here's what I did
Reset the device
Entered Download Mode (bootloader is locked for sure)
Flashed using Odin
Reset the device again
And still the same
Also did ur issue just start coz of unlocking?? I did flash a magisk patched AP as well
Click to expand...
Click to collapse
Yes my issue began right after unlocking which was easily reversed once I locked the loader.
In your case you flashed a custom rom which caused the Knox to trip and thus causing further issue.
Insomniac05 said:
I did man
I even wrote "Reset the device again" after "Flashed using Odin"
Click to expand...
Click to collapse
were you able to fix this?
nitinvaid said:
were you able to fix this?
Click to expand...
Click to collapse
Yes I was check the post on removing knox
Insomniac05 said:
Yes I was check the post on removing knox
Click to expand...
Click to collapse
where is it? and will it work on S21-Ultra

Categories

Resources