SAMSUNG S7
if you need the BASE ROM Nougat go to this Link G930AUCS4BRA1
Oreo patch april OTA-G930AUCS4BRA1-to-U4CRD6.zip
SAMSUNG S7 EDGE
if you need the BASE ROM Nougat go to this Link G935AUCS4BRA1
Oreo patch april OTA-G935AUCS4BRA1-to-U4CRD6.zip
SAMSUNG S7 ACTIVE
if you need the BASE ROM Nougat go to this Link G891AUCS2BRA7
Nougat ota patch February OTA-G891AUCS2BRA7-to-U2BRB5.zip
Nougat ota patch March OTA-G891AUCU2BRB5-to-S2BRC1.zip
Oreo patch april OTA-G891AUCS2BRC1-to-U3CRD6.zip
Tutorial
Step 1.
Download the desired update file above.
Step 2.
Place the ".zip" file in the SD of your phone.
Step 3.
Boot the phone into recovery mode by turning the phone off.
Once it's off, press and hold home, Volume Up, and Power buttons.
When it turns back on, let go of the Power button but keep the others held down.
Once a blue screen appears, let go of all the buttons.
Step 4.
Using the volume keys, navigate to:
"Apply update from SD card", select the file and press the Power button and wait for it to finish, then you're done!
FYI, there is already a thread for this oreo: https://forum.xda-developers.com/att-galaxy-s7/how-to/leaked-oreo-builds-t3780026
Related
My Rogers S6 edge W8 got an OTA OG2 yesturday so I went back to stock to get the new update. Now I want to root back but somehow the previous method of installing TWRP in odin, then flash SU and nosleep fix just doesnt work...actually only the recovery doesnt want to install. Odin tells me everything was a success, the phone seems to have installed TWRP but when I boot into recovery, it goes back to stock again.
Any ideas what could have gone wrong?
Also please dont suggest usuing CF-Auto root because it brick my phone every single time.
Here are the instructions I followed, the first time the process went without a hitch.
1. Download ODIN v 3.10.6 from http://forum.xda-developers.com/show....php?t=2711451 and extract it to a folder.
2. Download TWRP v2 by eousphoros (Odin Flashable Version) from https://mega.co.nz/#!aQhTnQRR!k-M-j9...swZO3CWYi0mMtI
3. Download the latest SuperSu Beta from http://forum.xda-developers.com/apps...v2-05-t2868133 and transfer it to your internal storage on the phone.
4. Download Deep-Sleep flashable fix from http://forum.xda-developers.com/show...7&postcount=56 and transfer it ot your internal storage on the phone.
5. Put your phone into Download Mode. Power Off, then hold Power+Home+VolDown. At the warning press VolUp to continue.
6. Connect your phone to your computer via the USB cable.
7. Launch ODIN.
8. You will see the text Added! in the status panel (left side).
9. Checkmark the box beside AP and then click on AP.
10. Browse to the TWRP tar.md5 file you downloaded earlier and select it.
11. Wait a few seconds for MD5 check to finish successfully.
12. Press Start. You will see the progress bar at the top and when it's complete status window will have message "All Threads Complete (Succeed 1, Failed 0)".
13. Boot into TWRP (Button combination Power+Home+VolUp) and then flash/sideload SuperSu beta zip and then the deep sleep fix zip that you have on internal storage.
14. Reboot to system. Congratulations, your phone is now rooted.
Click to expand...
Click to collapse
Did you uncheck Auto Reboot when you flash the recovery in Odin?
There is no such option with the newer odin
Sent from my SM-G925W8 using Tapatalk
I have heard that this update also breaks ping-pong root. We'll have to wait and see if those are updated
Ok, i found a fix. The problem was when i flashed recovery with odin, the custom recovery was overwritten as soon as the phone would boot back to system. I was able to keep TWRP installed by pressing Volume Up + Power + Home the second the recovery installation was finished and kept holding until Samsung Galaxy S6 edge logo appeared, then it booted me right in TWRP where I was able to flash SU and Sleep Fix.
I am using 3.10.6 and it has the option on one of the tabs on the left side. Yea, that's what I meant not to let it auto reboot. Reboot by holding Volume Down + Power + Home. When the screen goes back, hold Volume Up + Power + Home to boot into Recovery.
ShermanCheng said:
I am using 3.10.6 and it has the option on one of the tabs on the left side. Yea, that's what I meant not to let it auto reboot. Reboot by holding Volume Down + Power + Home. When the screen goes back, hold Volume Up + Power + Home to boot into Recovery.
Click to expand...
Click to collapse
Yeah. Sorry bud i was so used to it being in plain vue i didnt even see the tabs
Sent from my SM-G925W8 using Tapatalk
polish_pat said:
Yeah. Sorry bud i was so used to it being in plain vue i didnt even see the tabs
Click to expand...
Click to collapse
No problem at all. I am glad that you found the solution. I am still waiting on Rogers to update the W8 bootloader.
This is Old twrp . New recovery for a800i can be found here http://forum.xda-developers.com/sam...recovery-twrp-3-0-1-0-galaxy-a800i-f-t3350856
Official release of TWRP recovery for the SM-A800I, Exynos5433
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
Download link: https://dl.twrp.me/a8hplte/
Source: https://github.com/TeamWin/android_device_samsung_a8hplte
Recovery made by androidlover.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant for only samsung A800I with exynos chipset. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
thanx going to try soon thanx brother
Vivacity said:
This is Old twrp . New recovery for a800i can be found here http://forum.xda-developers.com/sam...recovery-twrp-3-0-1-0-galaxy-a800i-f-t3350856
Official release of TWRP recovery for the SM-A800I, Exynos5433
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
Download link: https://dl.twrp.me/a8hplte/
Source: https://github.com/TeamWin/android_device_samsung_a8hplte
Recovery made by androidlover.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant for only samsung A800I with exynos chipset. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
Click to expand...
Click to collapse
Hey brother did anyone have any Custom ROM for Galaxy A8 2015
Am having the same question.
Any nougat custom rom for our phone.
mumuni said:
Am having the same question.
Any nougat custom rom for our phone.
Click to expand...
Click to collapse
I don't think there are any custom ROM for this phone, as i have been desperately searching for them.
How to update?: PLK-L01, Android 5.0.2, EMUI 3.1, C432B180 -> to latest VER? (B330?)
Need simple steps how to update my Device from B180 to latest firmware?
Just download this; http://www.hihonor.com/uk/support/details/?DOC_ID=77509
Put the "dload" folder in your sd card. Shut down the phone and press Volume Up + Volume Down + Power Key. Release power key when you see the honor logo. Wait a little bit and update will start. After everything I need you recommend to do wipe your data and cache with Volume Up + Power Key.
memht said:
Just download this; http://www.hihonor.com/uk/support/details/?DOC_ID=77509
Put the "dload" folder in your sd card. Shut down the phone and press Volume Up + Volume Down + Power Key. Release power key when you see the honor logo. Wait a little bit and update will start. After everything I need you recommend to do wipe your data and cache with Volume Up + Power Key.
Click to expand...
Click to collapse
Got everytime stucked at 19% without cable and got stucked 90% with calbe plugged.
kenkae said:
Got everytime stucked at 19% without cable and got stucked 90% with calbe plugged.
Click to expand...
Click to collapse
You do not need the cable when you are updating the phone. After you put the dload file, plug out the cable. But I do not know your stucking problem. Maybe it's about your sd card.
If retained after the upgrade of personal data, settings, the update does not complete. Repeat the update, and the second time it will be complete.
This only applies to the downloaded file update is not OTA.
Apa71 said:
If retained after the upgrade of personal data, settings, the update does not complete. Repeat the update, and the second time it will be complete.
This only applies to the downloaded file update is not OTA.
Click to expand...
Click to collapse
Dont help at all, still thanks for comment!
Hmm...
1. Download the .zip
2.Unzip
3. The unzipped "dload" folder copy to sd card.
4. Turn off the phone.
5. Press Volume Up + Volume Down + Power Key. Release power key when you see the honor logo. Wait a little bit and update will start.
6. Something % procceed ,failed message, and stopped update, and restart the phone.
7. When restart, and optimizing, turn off the phone
8. Repeat the step 5.
Good Morning XDA.
My client has the above mentioned Huawei media pad t1 s8 701u. and it is stuck in quite a serious boot loop. I have tried to go into recovery with Volume Down + Power button for 10s and I feel the vibration where after that I let go and just get met with the same boot loop, it is a South African tablet so either XFA/XFE and I was wondering if any of the amazing people here on XDA would be able to assist me in finding a stock firmware to re-flash the poor thing, I know that with many Huawei devices the bootloader is locked but all I want to do is reflash stock firmware to get this unit working again
I have found a site that gives the following instructions:
"1. Make sure you have backed up all your important data. All files, messages, images, videos, contacts etc.
2. Download the .zip file.
3. Unpack it on your Desktop. Copy the dload folder to your SD card’s root directory.
4. Turn off your Huawei. (Make sure your battery has enough power. Charge it if necessary.) Insert the memory card.
5. Press both Volume keys (VOL UP and DOWN) and then the power key until the software upgrade progress bar displays. Then you can release all keys.
6. Wait until the progress bar finishes and the phone restart.
7. Check firmware version in Settings > About phone / build number."
now while the site does post a firmware file I am not sure if it has the right CSC and builds for my home country (South Africa As stipulated above) is there an international/ unlocked firmware file available? if yes could i please be assisted in finding it as my googling has me running in circles now
[Yes, I'm x-posting. Desperate times, etc.]
I can't get there. Could someone point me towards a solution. Here's the OP link
Thanks
Note 5 doesnt have a bootloader
If you want to root or use any custom roms, you need TWRP,
Steps to root:-
1) Download the latest version of twrp.tar for your device from TWRP's website
2) place it in AP in Odin
3) Shut down your phone then press Volume Down, Home Button, Power button simultaneously to boot to Odin/Download Mode
4) connect to your PC and flash twrp
5) Download Magisk v23 from Magisk's github.
6) use an OTG or place it on your phone's sdcard.
7) TWRP is a recovery, so, to open it, shut down your device and then click Volume Up, Home Button, Power button simultaneously until you see the Samsung Note 5 logo, then release the power button only until you boot to recovery.
8) Install it from TWRP
The reason i said v23 instead of v24 is because Magisk Hide is off as default for v24, so, better to install v23 then update magisk later from its app.
Download TWRP for nobleltespr
Download TWRP Open Recovery for nobleltespr
dl.twrp.me
Release Magisk v20.3 · topjohnwu/Magisk
Fix magiskboot crashing when dealing with lz4_legacy format Full Changelog: here
github.com
Oh and welcome to the note 5 xda family
3zozHashim said:
Oh and welcome to the note 5 xda family
Click to expand...
Click to collapse
You are kind. Thank you.
Even with the information you shared, it still wasn't a clear road ahead. After numerous attempts it became apparent that the ROM revision on the phone ( *DRH1) will not allow TWRP to be installed. After flashing the closest ROM I found (*DQJ1), things finally proceeded as you outlined. Thanks again. I was really stuck.
Thank you both, as this information will be vital, as I try to continue to use my N920P as a daily device. As I am needing to update to a more secure version of Android.