Plz help me to overcome this error. I have: RNE-L21C185B142 Custom Version: CUSTC185D001
Today I updated to Official Oreo from system update. Now it is: RNE-L21 8.0.0.310 (C185)
Then tried to use a recovery and Super SU zip
(2 zips tried one from elemental ROM for 8.0 and other from Super SU web site)
Both show same error as in following screenshots, plz help if there is a proper Oreo TWRP and Super SU that works.
1 more point is, I never got data folder back up whenever I tried to take a backup from TWRP
(both in nougat and after oreo update), tried a lot of methods discussed already, I would still get
createFork() error, if I uncheck data then I can take backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
usman400 said:
Plz help me to overcome this error. I have: RNE-L21C185B142 Custom Version: CUSTC185D001
Today I updated to Official Oreo from system update. Now it is: RNE-L21 8.0.0.310 (C185)
Then tried to use a recovery and Super SU zip
(2 zips tried one from elemental ROM for 8.0 and other from Super SU web site)
Both show same error as in following screenshots, plz help if there is a proper Oreo TWRP and Super SU that works.
1 more point is, I never got data folder back up whenever I tried to take a backup from TWRP
(both in nougat and after oreo update), tried a lot of methods discussed already, I would still get
createFork() error, if I uncheck data then I can take backup.
Click to expand...
Click to collapse
try to root your phone with magisk its better and stable
chimere2016 said:
try to root your phone with magisk its better and stable
Click to expand...
Click to collapse
Can u plz indicate the link where magisk root for oreo is available ?
Hello
root with magisk v16 stable.
everything is working properly.
Chisetdel31260 said:
Hello
root with magisk v16 stable.
everything is working properly.
Click to expand...
Click to collapse
send ss of your phone with magisk and android version please
scoutmoves said:
send ss of your phone with magisk and android version please
Click to expand...
Click to collapse
INSTALL zip magisk v16.
Safetynet pass OK. :good:
Go to Setting, select beta, install v16.4.
Voila:good:
Same here. Oreo install by Hwota on RNE-L01 euro verison.
sentavn said:
Same here. Oreo install by Hwota on RNE-L01 euro verison.
Click to expand...
Click to collapse
oréo b134 ??????
Chisetdel31260 said:
oréo b134 ??????
Click to expand...
Click to collapse
maybe you don't believe. But I am on B134 with OREO 8.0 , EMUI 8.0, full root
sentavn said:
maybe you don't believe. But I am on B134 with OREO 8.0 , EMUI 8.0, full root
Click to expand...
Click to collapse
you should try to install with twrp, install image the version.img file of b304
file version.img rne-l21c432b304 https://mega.nz/#!9hkEyaDB!YK2TCUXuE5xgLXDGcMb-tI58k3KCDNjXw8yZ4PDohUY
Thank you. I got it.
sentavn said:
Thank you. I got it.
Click to expand...
Click to collapse
bro my phone
Chisetdel31260 said:
you should try to install with twrp, install image the version.img file of b304
file version.img rne-l21c432b304 https://mega.nz/#!9hkEyaDB!YK2TCUXuE5xgLXDGcMb-tI58k3KCDNjXw8yZ4PDohUY
Click to expand...
Click to collapse
sentavn said:
Thank you. I got it.
Click to expand...
Click to collapse
Worked? How do you flashed that version.img file?
Would it work for me? (Screenshot attached).
Chisetdel31260 said:
you should try to install with twrp, install image the version.img file of b304
file version.img rne-l21c432b304 https://mega.nz/#!9hkEyaDB!YK2TCUXuE5xgLXDGcMb-tI58k3KCDNjXw8yZ4PDohUY
Click to expand...
Click to collapse
franzpimp87 said:
Worked? How do you flashed that version.img file?
Would it work for me? (Screenshot attached).
Click to expand...
Click to collapse
I didn't flash yet because everything are fine with me. What do u wanna do? I saw it's ok with your attachment
I extracted right version.img for my device RNE-L01C432
Check the attachment
Chisetdel31260 said:
INSTALL zip magisk v16.
Safetynet pass OK. :good:
Go to Setting, select beta, install v16.4.
Voila:good:
Click to expand...
Click to collapse
Thanks for the repoly,
do you have some twrp for rne-l22 c636? im afraid to flash the twrps for l21
scoutmoves said:
Thanks for the repoly,
do you have some twrp for rne-l22 c636? im afraid to flash the twrps for l21
Click to expand...
Click to collapse
Hello
en emui 8.0 uses this recovery catuva TWRP it is simple to install.
https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2
download on the pc, connect the phone in fastboot mode (low volume + power).
*** double click on the .bat file.
he will install it alone.
sentavn said:
I didn't flash yet because everything are fine with me. What do u wanna do? I saw it's ok with your attachment
Click to expand...
Click to collapse
I had problem flashing SuperSU, like in the OP. But find another root method.
Thanks.
franzpimp87 said:
I had problem flashing SuperSU, like in the OP. But find another root method.
Thanks.
Click to expand...
Click to collapse
You can not flash SuperSU right now. Flash Magisk 16 and then update to 16.4 Beta.
sentavn said:
You can not flash SuperSU right now. Flash Magisk 16 and then update to 16.4 Beta.
Click to expand...
Click to collapse
viper4android working, if you can please confirm?
Related
THIS kernel is for N910F
here's a kernel, compiled from N910F sources XXU1COI3, with XXU1COI3 Ramdisk
It has a single modification, in order to boot the 910F with root, in new firmware 5.1.1.
Everything else is a stock kernel.
Fixed the warning "kernel is not seandroid enforcing" on boot
my advice is, flash this kernel, and next, root your phone with your preferred method
enjoy:
Mod edit: No longer supported, link removed.
flash it in recovery
To install Root:
patensas said:
All i did was:
- flash the rom with odin
- flashed TWRP 2.8.7.0 with odin
- flashed kernel with TWRP
On exit from TWRP i got no root notification and i selected to apply root.
That was all that needed to be done on my device to gain root.
Click to expand...
Click to collapse
About warning "Notice Security":
lonegan said:
As you now have root access, you can install Titanium Backup and freeze SecurityLogAgent service to get rid of that message.
Click to expand...
Click to collapse
Sources (Updated 8/10/15):
http://www.mediafire.com/download/erb72lq6rsp0rlt/inicial_comit_2.zip
Merge the files in zip above with Samsung sources and compile it
Works.. nice one.. cheers
Well done
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
root with what??
i flash this ok no problem.....but root didnt work
i used same as i used with lolipop 5...which was..... CF-Auto-Root-trlte-trltexx-smn910f.tar
thanks i am in bootloop now...need help
edwardob said:
i flash this ok no problem.....but root didnt work
i used same as i used with lolipop 5...which was..... CF-Auto-Root-trlte-trltexx-smn910f.tar
thanks i am in bootloop now...need help
Click to expand...
Click to collapse
The auto root option doesn`t work on 5.1.1
Best thing to do seems to be flashing latest TWRP, flash the kernel within TWRP and use the root option that TWRP offers.
root option
my version 2.8.5 doesnt have root option
edwardob said:
my version 2.8.5 doesnt have root option
Click to expand...
Click to collapse
All i did was:
- flash the rom with odin
- flashed TWRP 2.8.7.0 with odin
- flashed kernel with TWRP
On exit from TWRP i got no root notification and i selected to apply root.
That was all that needed to be done on my device to gain root.
edwardob said:
my version 2.8.5 doesnt have root option
Click to expand...
Click to collapse
Just flash this kernel using TWRP and then SuperSU beta 2.49 (also using TWRP or other custom recovery)
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
BTW. Good work @zamcum, thanks!
Later EDIT:
Or use @patensas's method described above
thanks for all the help
looks like i have install room again ...then twrp then the zip file in twrp.....that right?
im in a boot loop
- Install TWRP 2.8.7.0 with Odin
- Flash within TWRP the Kernel (ZIP) posted in this thread
- Restart TWRP and will ask you to install SuperSU, install it
- After restart run SuperSU, will ask to update SuperSU from market, install, update binaries
At last i'm on my domain with root...
Thank you for your work zamcum
thanks again
i dowloaded zip but it was ccorrupted......install ok the second time ....thats what the problem was thanks
yeah I'm getting file corrupted too when flashing..downloaded twice
Sorry for the douch question but where can i get the 5.1 Rom?
d4rk1337 said:
Sorry for the douch question but where can i get the 5.1 Rom?
Click to expand...
Click to collapse
Sammobile or Samsung live blog
---------- Post added at 07:49 AM ---------- Previous post was at 07:47 AM ----------
There is a pretty amazing kernel from the Echoe rom people. Sign up to the forum to get access. I tried the above method but even after TWRP 'rooted' the rom, supersu wasn't able to function. Downloaded from playstore and then all was right.
security warning
how are you guys dealing with constant security warning... since update
edwardob said:
how are you guys dealing with constant security warning... since update
Click to expand...
Click to collapse
+2 on that one. Tried freezing everything Knox related. Still get that anoying warning...
Sent from my SM-N910F using Tapatalk
Reb0rn said:
+2 on that one. Tried freezing everything Knox related. Still get that anoying warning...
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
As you now have root access, you can install Titanium Backup and freeze SecurityLogAgent service to get rid of that message.
Hi guys..
Installed rom with 5.1.1, by using a PIT file by 3 Italia. Now i want to root.
Trying to install the twrp within Odin, but after one seconds of upload the program is in block.
Also need the PIT file when install a recovery??
great stuff
@zamcum, nice work!!!
Thank you my friend!!!
Hi here is the full B390 update modified to keep TWRP ( v3.02 gimini version)
you can use it to update or unbrick device ...
i did this with B390 coz B396 will lock bootloader ..
Copy it to EXTERNAL SD and flash with any TWRP (3.0 to 3.1.1)
http://www.mediafire.com/file/syl60r9qk0ydrsy/updateB390_TWRP.zip
Hi. Will it work with PLK-L01C432\
Thanks!
Hi!, i got a problem, i'm not sure what the cause is
i have a PLK-AL10, and i was trying to install this rom, to use the B396 Reloaded
i got this error when installing
Code:
"E:unknown command [errno]"
https://imgur.com/a/lgvii
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then i boot the room, and is "fine" but i can't get 3G to work, the phone don't detect the sim, if i change the sim port, then i get 2G working, if a put the 2G Sim as Main, no sim is detected
i tried installing b396 reloaded, but is the same
the 3G Enabled Sim port, just don't work
i can go back to the B380 (the PLK-AL10 B380) rom and everything work, and using the "MiUi for Honor 7 by WBT" works fine
i'm not really sure what to do, can you help me?
I'm using TWRP 3.0 by Jemmini
Sorry for the broken english
Hi, you could try to do a backup of cust of your PLK AL10 , install b396 reloaded, then restore your cust.
I'm not sure it will work ... Miui work coz based on Chinese rom, B396 is based on Europe rom
@Speedo.thc i get error 7 when i try to flash it on my plk-l01 idk why
orell12 said:
i get error 7 when i try to flash it on my plk-l01 idk why
Click to expand...
Click to collapse
Do you have latest twrp?
thats the error i get idk what to do
@Speedo.thc @spirtix
orell12 said:
thats the error i get idk what to do
Click to expand...
Click to collapse
Status 7 Error is caused when the ROM's updater script file checks to see if our mobile is compatible with the ROM we are installing, called "asserts".
Use official TWRP from TWRP.me
You can also try older versions or there's an error in updater script in zip.
If it doesn't help you can remove "assert check" from script.
Go to/META-INF/com/google/android/updater-script
Open updater-script with a script editor such as notepad/notepad++
Remove line with assert(getprop...
Save into zip and flash again.
spirtix said:
Status 7 Error is caused when the ROM's updater script file checks to see if our mobile is compatible with the ROM we are installing, called "asserts".
Use official TWRP from TWRP.me
You can also try older versions or there's an error in updater script in zip.
If it doesn't help you can remove "assert check" from script.
Go to/META-INF/com/google/android/updater-script
Open updater-script with a script editor such as notepad/notepad++
Remove line with assert(getprop...
Save into zip and flash again.
Click to expand...
Click to collapse
i already checked assert and there is no (getprop...) only assert(update_huawei_pkg_from_ota_zip("UPDATE.APP"));
i try to use another twrp
@spirtix
EDIT: Same error with twrp 3.02
orell12 said:
i already checked assert and there is no (getprop...) only assert(update_huawei_pkg_from_ota_zip("UPDATE.APP"));
i try to use another twrp
@spirtix
EDIT: Same error with twrp 3.02
Click to expand...
Click to collapse
okay when i sideload it with adb it works
Speedo.thc said:
Hi, you could try to do a backup of cust of your PLK AL10 , install b396 reloaded, then restore your cust.
I'm not sure it will work ... Miui work coz based on Chinese rom, B396 is based on Europe rom
Click to expand...
Click to collapse
Thx, i will try that later,
i will report later if works
EDIT: Is working!, thx alot!
installed B390
Restored my B380 Cust
Boot, and 3G signal!
Later, i installed B396 reloaded, and everything is working fine as far i know, thx again
sauroa said:
Thx, i will try that later,
i will report later if works
EDIT: Is working!, thx alot!
installed B390
Restored my B380 Cust
Boot, and 3G signal!
Later, i installed B396 reloaded, and everything is working fine as far i know, thx again
Click to expand...
Click to collapse
Do you still have B390 reloaded at device info or another ?
Speedo.thc said:
Do you still have B390 reloaded at device info or another ?
Click to expand...
Click to collapse
Sorry, missed a step
i restored the cust again when installed the b396 reloaded, because i don't get signal, so i restored the cust
in device info, Compilation number, says PLK-AL100C00B380, but so far, everything seems working, xposed works, Root works
sauroa said:
Sorry, missed a step
i restored the cust again when installed the b396 reloaded, because i don't get signal, so i restored the cust
in device info, Compilation number, says PLK-AL100C00B380, but so far, everything seems working, xposed works, Root works
Click to expand...
Click to collapse
Ok, it's what I thinking, please upload a backup of your cust for me, I will do a PLK-AL10 version.
Speedo.thc said:
Ok, it's what I thinking, please upload a backup of your cust for me, I will do a PLK-AL10 version.
Click to expand...
Click to collapse
Cool, ok, will upload the cust when i get back from work, thx
hi ty bro
i like this rom with oreo and nugeat android version :fingers-crossed:
I have lineage OS right now, can I just simply install this ROM via TWRP?
hi
yeah but you need to update to twrp lastet version
Guys im on LineageOS 13 rn. Should i turn back to older emui versions and flash ?
does anyone have a link to the latest version of twrp?
@Agrim720 has developed a super kernel for the Galaxy A20
For phones running a GSI with the U2 bootloader (June 2019 Firmware)
1. Download the new zimage and hktweaks from here.
https://forum.xda-developers.com/showpost.php?p=81010583&postcount=144
2. Follow my installation instructions here.
https://forum.xda-developers.com/showpost.php?p=81013993&postcount=145
The quick way is to download and unzip my new boot.img and install it from TWRP.
View attachment boot.zip
Just have your original patched boot.img ready just in case. If things go wrong, you just need to install your boot.img to get back to where you were.
For phones with the U3-U4 bootloader (late Oct - Nov 2019) @Agrim720 has developed his ripper kernel here
https://forum.xda-developers.com/galaxy-a20/development/kernel-ripper-kernel-v1-0-t4020627
The stock kernel allocates 2 core at 1.56GHz and 6 cores at 1.352GHz
The super kernel increases the CPU speeds to 2 cores at 2.184GHz and 6 at 1.586GHz
If you want to see the highest frequencies, you need to use hktweaks to set the minimum frequencies to equal the maximum frequencies.
If you don't use hktweaks, it will generally restrict itself to 1.768GHz and 1.482GHz
Big 2080-2184
Small 1352 - 1586
GPU 545-676
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
physwizz said:
Big 2080-2184
Small 1352 - 1586
GPU 545-676
Click to expand...
Click to collapse
Thank you @Agrim720 @physwizz
Nice upgrade to our phone performance
Sent from my SM-A205F using XDA Labs
I wish I could use it, cant install TWRP on my phone.
Deluriane said:
I wish I could use it, cant install TWRP on my phone.
Click to expand...
Click to collapse
Why not?
physwizz said:
Why not?
Click to expand...
Click to collapse
I have october update
Deluriane said:
I have october update
Click to expand...
Click to collapse
go through this.
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481
Agrim720 said:
go through this.
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481
Click to expand...
Click to collapse
Look forward to seeing the results
I just tried to backup with this kernel in place and it wouldn't backup data.
I had to reflash my patched stock boot.img
physwizz said:
I just tried to backup with this kernel in place and it wouldn't backup data.
I had to reflash my patched stock boot.img
Click to expand...
Click to collapse
its a twrp thing not kernel related.
@physwizz
Can't seem to make it boot up. I followed all your instructions, maybe I have to use a GSI Rom?
Deluriane said:
@physwizz
Can't seem to make it boot up. I followed all your instructions, maybe I have to use a GSI Rom?
Click to expand...
Click to collapse
Possibly.
I'm on June firmware
Deluriane said:
@physwizz
Can't seem to make it boot up. I followed all your instructions, maybe I have to use a GSI Rom?
Click to expand...
Click to collapse
Hi @Deluriane
You do NOT need GSI. It will work on any firmware now.
I just did a full Root / Twrp on the latest stock firmware from NOV. [ A205GUBU4ASK2 ] and it worked perfectly.
Just follow the correct guide for U4 and use the correct boot.img (compressed to a tar) and it WILL work :good:
Try it and let us know. :cyclops:
physwizz said:
@Agrim720 has developed a new kernel for the Galaxy A20
1. Download the new zimage and hktweaks from here.
https://forum.xda-developers.com/sho...&postcount=144
2. Follow my installation instructions here.
https://forum.xda-developers.com/sho...&postcount=145
The quick way is to download and unzip my new boot.img and install it from TWRP.
View attachment 4891171
Just have your original patched boot.img ready just in case. If things go wrong, you just need to install your boot.img to get back to where you were.
Click to expand...
Click to collapse
@physwizz
Update links please
Thibor69 said:
Hi @Deluriane
You do NOT need GSI. It will work on any firmware now.
I just did a full Root / Twrp on the latest stock firmware from NOV. [ A205GUBU4ASK2 ] and it worked perfectly.
Just follow the correct guide for U4 and use the correct boot.img (compressed to a tar) and it WILL work :good:
Try it and let us know. :cyclops:
Click to expand...
Click to collapse
Okay, trying my luck again and this time I'm gonna use TWRP and not flash it on Odin.
Thibor69 said:
@physwizz
Update links please
Click to expand...
Click to collapse
I think the links have been deleted because the kernel doesn't follow the rules
Deluriane said:
Okay, trying my luck again and this time I'm gonna use TWRP and not flash it on Odin.
Click to expand...
Click to collapse
Umm I thought you said you did not have TWRP or you could not install TWRP due to Nov update. I am sorry if I missunderstood...
Thibor69 said:
Umm I thought you said you did not have TWRP or you could not install TWRP due to Nov update. I am sorry if I missunderstood...
Click to expand...
Click to collapse
I dont have it installed right now since went back to stock since installing GSI, going to try out the custom kernel, reroot and reinstall TWRP.
Didnt have TWRP before when I tried installing the kernel using Odin, but since Agrim720 released a TWRP and worked on my phone didnt try to install the kernel again.
To be claim, i am NOT the maintianer.
Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. So after hunders of fastboot flash, i succeesfully boot in system after flash, hope everyone can try and if any issue, you can commit this thread or pull a issue to this gsi github.
CLICK Guthub TO DOWNLOAD the "PixelExperience_Plus_arm-ab-11.0-xxxxxxxx-UNOFFICIAL.img.xz"
Three steps to flash:
1,Backup all your data and unzip the file you downloaded from github BTW.
2,If you want to get Magisk, flash Magisk before you flash PE. Without flash new bootimg, Magisk will be permanent.(option)
2,connect to computer and use command <adb reboot fastboot> or press vol- and power to rebbot to the fastboot mode.
3,use command<fastboot flash system xxx.img> to flash PEPlus, <fastboot reboot> to boot into system.
BTW, I am the people who are not native speakers of English, so if i use some wrong word, just let it go if didn't confuse you.
Hope you success.
If feedback of this rom is good, i will base on it to maintain the ROM that only for Mi11 Lite.
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
vanpopel said:
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
Click to expand...
Click to collapse
I flash it on my Mi 11 Lite 5G and it work.
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
rayman95 said:
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
Click to expand...
Click to collapse
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
paatha13 said:
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
Click to expand...
Click to collapse
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
ZeroSherd said:
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
Click to expand...
Click to collapse
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
rayman95 said:
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
Click to expand...
Click to collapse
I did finding a way to get R/W according to patch the ROM without TWRP
ZeroSherd said:
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
Click to expand...
Click to collapse
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
paatha13 said:
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
Click to expand...
Click to collapse
Of course, i will upload it to NETDISK after i finish my OT work that i may need half or A day to done it.
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
rayman95 said:
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
Click to expand...
Click to collapse
I think you can use ADB command or software to disable those GAPPS.
How do I backup the data if there is no custom recovery available?
In_a_state said:
How do I backup the data if there is no custom recovery available?
Click to expand...
Click to collapse
I highly recommand the TitaniumBackup if you got ROOT, or use MIUI backup which inside the settings.
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
What's the way to go back to stock if got issues on PE???
Thanks
paatha13 said:
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
Click to expand...
Click to collapse
Think most people are waiting on a working twrp recovery.
rayman95 said:
What's the way to go back to stock if got issues on PE???
Thanks
Click to expand...
Click to collapse
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZeroSherd said:
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.View attachment 5323491
Click to expand...
Click to collapse
where do you get this???
here what I have from last EU fastboot rom...
I'm trying to install Magisk because the poco x3 GT has arrived and I was able to unlock it.
After fastbooting the img file created by Magisk, it becomes a boot loop.
I've succeeded with the same procedure on Mi9, so I don't think it's wrong, but if I try again, the result is the same.
MIUI is not 12.5.2.
If anyone has succeeded, please give me some advice.
I wish someone could make a trwp for chopin
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
红豆生南瓜 said:
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
Click to expand...
Click to collapse
Thank you very much.
I'm using the global version 12.5.2, but I'll give it a try.
You may also need this file
Tommy SUDA said:
Thank you very much.
I'm using the global version 12.5.2, but I'll give it a try.
Click to expand...
Click to collapse
红豆生南瓜 said:
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
Click to expand...
Click to collapse
I tried to burn the boot.img file with the fastboot flash recovery command, but it didn't work.
Tommy SUDA said:
I tried to burn the boot.img file with the fastboot flash recovery command, but it didn't work.
Click to expand...
Click to collapse
first,fastboot boot.img, then,fastboot vbmeta.img. Refer to poco m3 pro's method
Of course, it may also be caused by different versions of MIUI system
红豆生南瓜 said:
first,fastboot boot.img, then,fastboot vbmeta.img. Refer to poco m3 pro's method
Of course, it may also be caused by different versions of MIUI system
Click to expand...
Click to collapse
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
thanks,I'll try it
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
I confirmed the poco m3 pro's method.
One thing to check, do you patch this boot file with magisk and then fastboot? Or can it be used as it is?
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
The global version of boot.img supporting magisk has been made in China, but he has to pay. I can't get it, sorry
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
红豆生南瓜 said:
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
Click to expand...
Click to collapse
Thanks again ,I‘ll try it
Tommy SUDA said:
thanks,I'll try it
Click to expand...
Click to collapse
it's stock not patched magisk yet
红豆生南瓜 said:
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
Click to expand...
Click to collapse
I unzipped the one-click tool, but I don't know how to use it. Can you tell me
Tommy SUDA said:
I unzipped the one-click tool, but I don't know how to use it. Can you tell me
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect the phone to the computer in FastBoot mode, run the bat file, and then select serial number 9，flash boot and vbmeta
红豆生南瓜 said:
View attachment 5405045
Connect the phone to the computer in FastBoot mode, run the bat file, and then select serial number 9，flash boot and vbmeta
Click to expand...
Click to collapse
I connected poco to a PC in fastboot mode, executed a batch file, and entered the number 9 from the menu screen, but the screen closes and exits. If anyone has any problems, please let me know.
Tommy SUDA said:
I connected poco to a PC in fastboot mode, executed a batch file, and entered the number 9 from the menu screen, but the screen closes and exits. If anyone has any problems, please let me know.
Click to expand...
Click to collapse
Maybe it's a driver problem. I'm not sure. This is another tool you can try.
红豆生南瓜 said:
Maybe it's a driver problem. I'm not sure. This is another tool you can try.
Click to expand...
Click to collapse
I was able to successfully root with this tool. I'm really thankful to you.