xiaomi-miui-hellas-8.0_scorpio_V10_arΩma_ and _XTRV_8.8.30
Multilanguaje
XTRV-8.8.30 Y AROMA ROM (MIUI 10) Based Global
Magisk has been updated to the new version V16.7.
If you install it, on some devices on the first boot you will notice a large LAG.
To press, you will have to do 1-2 Restart your device.
It is not a ROM problem, but a Magisk behavior.
DOWNLOAD xiaomi-miui-hellas-8.0_scorpio_V10_arΩma_8.8.30 FOR TWRP: https://androidfilehost.com/?fid=1322778262903994794
DOWNLOAD xiaomi-miui-hellas-8.0_scorpio_V10_XTRV_8.8.30 FOR TWRP: https://androidfilehost.com/?fid=1322778262903994758
Regars
Related
Umm.. Yeah !
We can easily swap between the two OSs, without unlocking Bootloader or Flashing TWRP
Just Simply Download the Desired OTA zips below and flash via Stock Recovery. (Stable and Safe)
Steps: To Flash Lollipop OTA
Prerequisite: OTA Zips, Get from Links Below
1. Boot to Stock Recovery (Volume Down + Power)
2. Select Language (English/Chinese)
3. Wipe Data/Cache (Yeah you have to otherwise you get stuck at Boot Logo)
4. Flash the desired Lollipop Based zip (Oxygen OS 2.x.x or Hydrogen OS 14-15 )
5. Wait to complete, reboot n Enjoy.
#Note: All OTA zips can also be Flashed via TWRP
Steps: To Flash TWRP & Root
1. Download OnePlus2 Toolbox
2. Extract and Open the "Run_Me"
3. Install OnePlus2 Drivers, ADB Drivers
4. Put Your Device to FastBoot (Vol Up + Power), connect to PC.
5. Unlock Bootloader, phone will restart and will wipe all data
6. Again Put Your Device to FastBoot (Vol Up + Power), connect to PC.
7. Flash Recovery, using option 6.
8. Wait to complete, Enjoy!
#Note: To root your OnePlus2, download the SuperSU Zip and Flash via TWRP
Downloads: (Google Drive)
Hydrogen_LP_OTA_014
Hydrogen_LP_OTA_015
Oxygen_LP_OTA_011
Misc:
Hydrogen_MM_OTA_01_Beta (Better Dont Flash, it will lock your Recovery Partition)
OnePlus2 Toolbox
SuperSU 2.46
GoogleApps_5.1.1
Confused between Hydrogen And Oxygen ??
- Go for Hydrogen, as of now Oxygen is buggy.
Hydrogen OS Pros:
1. Stable
2. Awesome and Clean UI, Dont like H2 Launcher? Use Nova or like, instead.
3. Finger Print Sensor, Faster n Accurate, Home key works perfectly.
4. Awsome Camera, no bugs.
5. BuiltIn apps Like: Gallery, Weather, Tuner, Notes, Manager.
6. Better Battery n RAM Optimization.
7. Better Dual SIM Management.
8. OnePlus Team more interested in Hydrogen OS, as H2OS_MM_Beta developement in progress. ( No News about OOS_MM)
Cons:
1. No Built-In Support for GoogleServices, Flash Gapps instead. [Solved]
2. Pre-Installed Chinese Bloats, use Purify or Like to remove. [Solved]
3. No support for Locales other than English/Chinese, use MoreLocale. [Solved]
If more, let me know.
If i flash Hydrogen os via stock recovery i can flash the gapps with it ?
blior32017 said:
If i flash Hydrogen os via stock recovery i can flash the gapps with it ?
Click to expand...
Click to collapse
For now "NO" Use TWRP to Flash GApps or Use "microG GmsCore" it can be installed as Normal APK, its in beta stage though.
MicroG GmsCore Thread
Su ??
Which su I have to download for hydrogen in one plus two 64 GB ??
This ROM flashes to your current slot and includes TWRP
no need to change the slot after flashing and no need to flash TWRP or Gapps, just flash and reboot
flashing instructions:
1- Boot TWRP
2- flash the rom
3- flash Magisk (optional)
4- reboot and enjoy
If setup wizard or settings crash, wipe data and try again
if you want to use Mi account then:
1- flash miaccountfix.zip in Magisk (on Android File Host)
2- reboot
3- sign in to your account
4- remove the module from Magisk
5- reboot
ROM includes full F2FS support and EAS kernel
Download: https://drive.google.com/file/d/1b6pm-utG8H-m5J5GF03ZNQ3cTDfAta2p/view?usp=sharing
dinhtu1993 said:
This ROM flashes to your current slot and includes TWRP
no need to change the slot after flashing and no need to flash TWRP or Gapps, just flash and reboot
flashing instructions:
1- Boot TWRP
2- flash the rom
3- flash Magisk (optional)
4- reboot and enjoy
If setup wizard or settings crash, wipe data and try again
if you want to use Mi account then:
1- flash miaccountfix.zip in Magisk (on Android File Host)
2- reboot
3- sign in to your account
4- remove the module from Magisk
5- reboot
ROM includes full F2FS support and EAS kernel
Download: https://drive.google.com/file/d/1b6pm-utG8H-m5J5GF03ZNQ3cTDfAta2p/view?usp=sharing
Click to expand...
Click to collapse
Are you sure this is for nubia redmagic? Because afaik there isn't anything you mentioned in the OP!
you know if it works and if it works for the red magic nx609J ????
Mod edit - translated by https://www.deepl.com/translator:
link down
*******************************
enlace caido
Hey, recently I've updated to miui 11 and I've unlocked the bootloader long ago but I couldn't install twrp on my phone, every time I push the up volume button and power it leads me to the mi recovery, and if I press down volume button it leads me to the fastboot with that communist rabbit.
I'm quite tired of trying over and over watching every tutorial of Hindi kids speaking as fast as a squirrel and I just want to know if someone did it with miui 11 working and explain me how to install that damned custom recovery
I think someone has to build the recovery, because I tried to flash the TWRP, but I can't install it.
TWRP that is compatible for Redmi 6A MIUI 11 does not exist yet.
Even the previous version of "MIUI v10.4.4.0" which now used "Android 9 or Pie" replacing ""Android 8.1" had to use an unofficial modified TWRP to get it working.
if i update via twrp with the v11.0.5recoverymode zip file what happen? it will brick?
well, i did it
the update package install normally without errors for me, but when i try to enter in twrp, it is erased, instead is the stock recovery lul
my steps:
>Previusly have Android 9 Pie MIUI 10 (i think was v10.4.4) with TWRP 3.3.1 MOD (For pie) and root with magisk (20.0)
> Donwload the recovery package (1.4GB in MIUI11 oficial you can donwload it)
> Go to TWRP in your phone
> Install the package
> Reboot
- I did not install the Magisk bacause i forgot that, but the system runs normally
- I dont know what happen if you root the phone after zip installation (maybe brick)
- You will erase your TWRP, basically you will have a stock phone
- Now there isnt a TWRP official or mods for MIUI V11.0.5
gusitir said:
well, i did it
the update package install normally without errors for me, but when i try to enter in twrp, it is erased, instead is the stock recovery lul
my steps:
>Previusly have Android 9 Pie MIUI 10 (i think was v10.4.4) with TWRP 3.3.1 MOD (For pie) and root with magisk (20.0)
> Donwload the recovery package (1.4GB in MIUI11 oficial you can donwload it)
> Go to TWRP in your phone
> Install the package
> Reboot
- I did not install the Magisk bacause i forgot that, but the system runs normally
- I dont know what happen if you root the phone after zip installation (maybe brick)
- You will erase your TWRP, basically you will have a stock phone
- Now there isnt a TWRP official or mods for MIUI V11.0.5
Click to expand...
Click to collapse
So right now your phone is on MIUI 11 but not rooted correct?
Just now. I just installed TWRP and have root on my phone. All seems to be working fine.
ABOUT VERSIONS OF kvt:
2.x is if you're coming from stock Oreo or Pie
3.x seems to be only for stock Pie (otherwise networks don't work) - Oreo modem still has to be flashed though
There is a guide for GSI, but it is outdated, no longer maintained and all links are dead. That's why I'm creating this up to date guide.
If you do not know, what is Project Treble and GSIs, google it first. Proceed only if you know what are you doing. This guide is only for those, who know what is bootloader, fastboot, recovery and TWRP. If you don't, learn that first. There are many guides (for example guides for rooting and Magisk) UNLOCKED BOTLOADER REQUIRED
Guide
1) Download needed files:
- treble recovery: https://mega.nz/#F!b8RgGQCa!48TRsDcJFpaAGNOcc9Fb-A?GxR2TCAA
(this is my mirror, as original links are dead, don't know who is the original developer)
- kvt (find lastest version here) https://androidfilehost.com/?w=files&flid=303096&sort_by=date&sort_dir=DESC (developer deivesj)
(this allows GSI to work on Moto Z2 Play with some of it's stock features like fingerprint gestures, device gestures, pass safety-net and more)
- if you want to use Android 9.0 Pie based ROMs and older, you might want to use V7 kvt instead:
https://mega.nz/#!7w5V1KpQ!uoCMqynn5D83trvZ6uXY30S8b9rLiBlXf1JTeMYQ0rc
- if you are coming from stock Android 9.0 Pie ROM, you will need modem from Android 8.0 Oreo
https://mega.nz/file/mxhxXCaI#nJpdQ3nPnc6urkYP8vLrVb_vc_7EsnXK7MXw3U1xohw
- you may need stock recovery https://mega.nz/#!XphFEIxK!yNdHJSakfO90K1ua92SODoqd85nvwRi7h65EA8RkOuI
-GSI of your choice (links below)
transfer kvt to your phone to external microSD, keep the rest in your PC
1) go to fastboot mode (power+volume up simulaneously)
2) flash treble recovery (using fastboot command: fastboot flash recovery 'filename.img')
3) boot to recovery and wipe system, data, cache
Note: after boot to recovery, touchscreen doesn't work. Turn screen off and on to make it work!
4) in recovery, flash kvt zip. It will guide you through
5) reboot back to bootloader
6) flash chosen GSI as system image (fastboot flash system 'filename.img')
7) if you are coming from stock Pie, flash Oreo modem (fastboot flash modem NON-HLOS.bin)
reboot
Note: If you are coming from stock ROM, decryption may fail. The easiest way is to temporarily flash stock recovery. After decryption fails, it will prompt you to reboot and format data. TWRP can't do it, but stock recovery can. After you are booted, you can flash TWRP again.
Where to get GSIs:
the biggest list is here: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
For Z2 Play, always download arm64 version and Aonly
There is a folder with ported stock ROMS (MIUI, Samsung, Moto...) on mirrors.lollinet but they do not work on Z2 Play. I also tried various stock ROM ports from other sources and they did not work. Custom ROMs fork fine.
Magisk:
Standard Magisk versions may not work. If you get bootloop, after installing Magisk, flash uninstaller. Then you can try phusson's version:
leodexe said:
Updates:
Magisk 20.x: https://sourceforge.net/projects/expressluke-gsis/files/Extras/phh-magisk-ten/
Click to expand...
Click to collapse
Ask if something isn't clear.
updated treble
Updates:
KVT 2.6: https://androidfilehost.com/?fid=8889791610682867863
Magisk 20.x: https://sourceforge.net/projects/expressluke-gsis/files/Extras/phh-magisk-ten/
I am currently using Pixel Experience Plus (Android 10) GSI, I installed it with latest KVT 2.6 and most stuff works out of the box. If you come from Stock Pie you need to flash the modem file from Stock Oreo to get proper audio during calls, as the modem from Android 9 gets bugged on Custom ROMs breaking the audio during calls. http://www.mediafire.com/file/q8nbpybxc8mjyew/NON-HLOS-Z2P-STOCK-8-OREO.7z/file
Confirmation
Mate can u confirm whether this kvt fix the screen flickering issue when there are more than 3 notifications in the status bar and does it have fingerprint gestures enabled???
lordfinix said:
Mate can u confirm whether this kvt fix the screen flickering issue when there are more than 3 notifications in the status bar and does it have fingerprint gestures enabled???
Click to expand...
Click to collapse
I don't use fingerprint gestures so I can't tell you about that. Also I had experiencing some crashes and reboots with this GSI lately, so I will try with another one once I can access internet to download anothet GSI.
CONFIRMED
i confirm it by flashing the flickering issue is gone and the gestures works as well this is by far the most stable KVT released kudos to developers
There are new versions of kvt available. Check the updated first post for link to deivesj's last files.
I did not experience any flickering or other graphical glitches with the new (2.X) versions of kvt (unlike the old v8 one).
Fingerprint gestures work, but not in all gsis
leodexe said:
Updates:
KVT 2.6: https://androidfilehost.com/?fid=8889791610682867863
Magisk 20.x: https://sourceforge.net/projects/expressluke-gsis/files/Extras/phh-magisk-ten/
I am currently using Pixel Experience Plus (Android 10) GSI, I installed it with latest KVT 2.6 and most stuff works out of the box. If you come from Stock Pie you need to flash the modem file from Stock Oreo to get proper audio during calls, as the modem from Android 9 gets bugged on Custom ROMs breaking the audio during calls. http://www.mediafire.com/file/q8nbpybxc8mjyew/NON-HLOS-Z2P-STOCK-8-OREO.7z/file
Click to expand...
Click to collapse
Thanks, I will update the guide
Could someone please give me a mirror of kvt v2.6? androidfilehost is terribly slow...
Hello,
Seem to have lost my network after flashing the pixel experience gsi from stock. imei missing as well. Any help?
It may be problem with modem.
What was your stock ROM? 8.0 or 9.0?
What version of kvt did you use? 2.x or 3.x?
How install?
how is the modem installed?
It's explained in the guide, step 7.
Wrongly flashed modem may cause WiFi, Bluetooth and SIM not to work
Kvt link is down. But you can use LineageOS with treble support now
Now i can't flash Gapps pack 7.1 with 7.1.2 rom anymore, always error code: 20.
I tried many time, reboot system after flash rom, and go back to recovery, still not work.
I use fox recovery.