Hello, i've Tried this pie ROM on my z2 play.
Bug I know: screen mirror, and specifically for z2 corrupted storage (you can fix it with 8.1 kernel) and camera.
Link:
https://forum.xda-developers.com/pr...-device-development/gsi-havocos-v2-0-t3855601
The ROM is fantastic and works flawless and it's fully customizable.
It could be for daily use if anyone know how to fix camera for z2!
Download A version of rom and decompress img
1.flash trwp 64 bit and do wipes as 3.
2.flash any 8.1 rom (RR or Viper)
3.Wipe cache, dalvik, system, data
4.flash img rom on system partition
5.flash 8.1 kernel on boot image
6.reboot
Credit to developer
Inviato dal mio Moto Z2 Play utilizzando Tapatalk
Do we even have any kernel development here? I have not seen any in the Roms & Kernel section.
Hi, thanks for sharing.
I never installed a GSI. I have a question: from where did you get the vendor.img to make it works? Thanks and sorry for the noob question.
1.you can use any Oreo kernel from last builds
2.no vendor.img to flash because you flash it when you flash Oreo rom
I hope anyone make a fix for camera!
Inviato dal mio Moto Z2 Play utilizzando Tapatalk
Have you tried oxygen os pie gsi ? @OP
Sorry, no.
Inviato dal mio Moto Z2 Play utilizzando Tapatalk
Please share Kernel file
Kernel Image
Pranav Kumar said:
Please share Kernel file
Click to expand...
Click to collapse
Yes please do because I tried pulling it from RR and Viper but after flashing it , ROM bootloops
So I was trying to debug what actually is breaking down file manger and camera . I extracted device logs and I observed that there's this library called "lib_mot_app6_metadata.so" which is missing for our device in the build. I turns out that this library comes from vendor blobs which are propitiatory, which in turn means that we might need to put this lib at proper path in our device to make these things work . I'm not sure if that's the exact issue but most of the exceptions are generated because of this library only.
Hope someone could make sense out of this. I have attached device log file as well.
andromuks said:
So I was trying to debug what actually is breaking down file manger and camera . I extracted device logs and I observed that there's this library called "lib_mot_app6_metadata.so" which is missing for our device in the build. I turns out that this library comes from vendor blobs which are propitiatory, which in turn means that we might need to put this lib at proper path in our device to make these things work . I'm not sure if that's the exact issue but most of the exceptions are generated because of this library only.
Hope someone could make sense out of this. I have attached device log file as well.
Click to expand...
Click to collapse
This link has some file for GSI Pie, see if you can find what you need https://telegra.ph/Como-instalar-o-Android-Pie---Moto-Z2-Play-08-08
Thanks for log. Try to put mm-qcamera-daemon file in system/vendor/bin and lib_mot_app6_metadata.so in system/lib and tell us.
For kernel you can use boot-radium-fpkeys.img from link. this kernel fix a file manager problems
peppet said:
Thanks for log. Try to put mm-qcamera-daemon file in system/vendor/bin and lib_mot_app6_metadata.so in system/lib and tell us.
For kernel you can use boot-radium-fpkeys.img from link. this kernel fix a file manager problems
Click to expand...
Click to collapse
Hi peppet! I see you're italian, and I am happy about that because I am italian too
Closing the off-topic argument, if you can reach me on Telegram (send me a PM for the nick) and I'll try this in live with you
Let me know, keep it up!!
Boys,
I try my installation with the vendor of Mokee rom and I'm doing everything right except the camera, I've tried several GSI and sGSI and in almost all of them the camera works .. !! I have tried several fixes and exchanging files from the camera but I have not achieved anything yet, I hope they are lucky and can share ... !!
Greetings.
Same for me. In Which pie rom the camera works?
Inviato dal mio Moto Z2 Play utilizzando Tapatalk
in this is the only one that is walking almost everything . https://telegra.ph/Como-instalar-o-A...-Z2-Play-08-08
in havooc the images did not rotate me and I have managed to solve it by changing the file [email protected] of / system / lib from an android rom oreo in my case I took toxicos and I have already managed to turn the screen in automatic, I will continue reviewing to solve the problem where it does not open the camera ... !!
Is a vendor problem. We need a developer
Inviato dal mio Moto Z2 Play utilizzando Tapatalk
Rotation do not work for me. Can you explain how you fix it?
lsolis293 said:
in havooc the images did not rotate me and I have managed to solve it by changing the file [email protected] of / system / lib from an android rom oreo in my case I took toxicos and I have already managed to turn the screen in automatic, I will continue reviewing to solve the problem where it does not open the camera ... !!
Click to expand...
Click to collapse
Inviato dal mio Pixel XL utilizzando Tapatalk
All the sensors and camera are broken in every treble including Oreo GSI
Good news for you, using the vendor of the new ViperOS and adding the lib_mot_app6_metadata.so by twrp giving the permissions 0644 I got the camera and lantern running natively
Related
Hi guys... probably you remember this thread: [FIX][Oversharpening][All Variants] Stock kernel with oversharpening fix
Those kernel aren't good as the stock ones because i builded them from source without any fix ( this is also the reason why they take some time to boot ).
Additionally some doesn't like the sharpening completely disable and want to try differents values.
Here i come with this new Aroma Scripts. Just flash it in recovery, select your preferred value between 0 to 40 ( 0 - 5 - 10 - 15 - 20 - 25 - 30 - 35 - 40 ), install and reboot.
This might be compatible with all kernels ( also AOSP ) but i didn't test for all so i need your feedback.
Installation:
- Copy the zip in your device;
- Reboot in recovery and do a backup of your boot partition ( just to be safe );
- Install the zip;
- reboot your device.
IMPORTANT: Remember to put your screen off 1 time to make it working.
Changelog:
v.2.0 - Now stock Kitkat ROM might works tnx to my new livebump script
v.2.5 - Script Fix
v.3.0 - Added all values from 00 to 40
v.3.5 Better compatibility
If you are asking to yourself if this is safe to try the answer is : YES. Just do a backup of your boot partition before install the script. If your device will not boot reboot in recovery, restore your boot partition and you are good to go.
Hi ! I flashed your last chupachups kernel with oversharpening fix implemented but my g3 runs your lollipop rom (the one already rooted), not your chupachups release. Everything is fine for now. Is there any reason to flash a stock kernel and apply this mod instead ?
Sent from my LG-D855 using XDA Free mobile app
djuicecola said:
Hi ! I flashed your last chupachups kernel with oversharpening fix implemented but my g3 runs your lollipop rom (the one already rooted), not your chupachups release. Everything is fine for now. Is there any reason to flash a stock kernel and apply this mod instead ?
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Chupa Kernel is enouth good but the kitkat kernel i posted aren't. So i think that is better to use this instead of thoose kernels.
Plus, with this, you can select your preferred value ( some guys didn't like the sharpening completely disabled ) and might be universal ( stock - AOSP )
boot error
i encountered an boot error and the led is blinking blue and red. glad i have the backup and just restore
edit: i just saw kernel already bumped tha'ts why. im using the kernel with oversharpening fix
Direct kernel patching, now this is really nice
Thank you so much for the hard work you put in.
I'll test later today and report back.
I had a look into the updater script and it extracts two folders tmp and sbin, but the zip only contains tmp?
Skin1980 said:
EDIT: For now this works only in kernel already bumped
Click to expand...
Click to collapse
I am using a stock ROM with root and TWRP, did not flash anything (besides temperature mod).
Does this mean my device is good to go for this?
(Never completely got my head around bump root, bump unlock, bumped kernels, and when a dev needs bump)
Thank you.
Regards,
sub
drew261920 said:
i encountered an boot error and the led is blinking blue and red. glad i have the backup and just restore
edit: i just saw kernel already bumped tha'ts why. im using the kernel with oversharpening fix
Click to expand...
Click to collapse
Same for me, o had modified kernel without oversharpening, flash back stock, and try the new mod an did not work
Inviato dal mio LG-D855 utilizzando Tapatalk
Sick script man.
One problem setting the value to "20" cause a security check error on boot. Other values "0, 25, 5" are okay.
Been using stock aosp kernel without the os patch.
Helloworld294 said:
Sick script man.
One problem setting the value to "20" cause a security check error on boot. Other values "0, 25, 5" are okay.
Been using stock aosp kernel without the os patch.
Click to expand...
Click to collapse
My only test was with 20 values, can be this the problem or is because is not working with stock kernel?
Inviato dal mio LG-D855 utilizzando Tapatalk
Helloworld294 said:
Sick script man.
One problem setting the value to "20" cause a security check error on boot. Other values "0, 25, 5" are okay.
Been using stock aosp kernel without the os patch.
Click to expand...
Click to collapse
i used the 20 value also, but i did not try the other value, so the 0,25 and 5 are working?
lila73 said:
My only test was with 20 values, can be this the problem or is because is not working with stock kernel?
Inviato dal mio LG-D855 utilizzando Tapatalk
Click to expand...
Click to collapse
Nevermind, I tried choosing "20" again and all went well. I guess the script glitched and didn't patch correctly.
Its working with all kernels.
---------- Post added at 01:56 AM ---------- Previous post was at 01:52 AM ----------
drew261920 said:
i used the 20 value also, but i did not try the other value, so the 0,25 and 5 are working?
Click to expand...
Click to collapse
Yes, all is well.
Helloworld294 said:
Nevermind, I tried choosing "20" again and all went well. I guess the script glitched and didn't patch correctly.
Its working with all kernels.
Click to expand...
Click to collapse
So you think o should try it again even if i m using stock kernel or o must first flash back the skin not oversharpening kernel?
Inviato dal mio LG-D855 utilizzando Tapatalk
lila73 said:
So i think o should try it again even if i m using stock kernel or o must first flash back the skin not oversharpening kernel?
Inviato dal mio LG-D855 utilizzando Tapatalk
Click to expand...
Click to collapse
Flash whatever kernel you want BESIDES the one posted by Skin, and then apply the script.
Everything should be okay.
Regards.
Helloworld294 said:
Nevermind, I tried choosing "20" again and all went well. I guess the script glitched and didn't patch correctly.
Its working with all kernels.
---------- Post added at 01:56 AM ---------- Previous post was at 01:52 AM ----------
Yes, all is well.
Click to expand...
Click to collapse
ok maybe ill try it again
drew261920 said:
ok maybe ill try it again
Click to expand...
Click to collapse
Report back please.
I've tried with stock and stock bumped ( I know it don't make sense) with 20 and 25. I got the security boot error.
Maybe is intentend for custom kernel only?
the_best_hacker said:
I've tried with stock and stock bumped ( I know it don't make sense) with 20 and 25. I got the security boot error.
Maybe is intentend for custom kernel only?
Click to expand...
Click to collapse
ok tnx... i have a fix in mind. Later i will work on that.
Helloworld294 said:
Flash whatever kernel you want BESIDES the one posted by Skin, and then apply the script.
Everything should be okay.
Regards.
Click to expand...
Click to collapse
Tryed again with stock kernel, value 0 again boot error, o have flash back the modified without oversharpening by skin, for me is not working with stock kernel
Inviato dal mio LG-D855 utilizzando Tapatalk
lila73 said:
Tryed again with stock kernel, value 0 again boot error, o have flash back the modified without oversharpening by skin, for me is not working with stock kernel
Inviato dal mio LG-D855 utilizzando Tapatalk
Click to expand...
Click to collapse
Flash RIN kernel and then apply the script. Report back please.
Helloworld294 said:
Flash RIN kernel and then apply the script. Report back please.
Click to expand...
Click to collapse
I have read of Rin kernel, but i prefer to remain on stock, the one without oversharpening for me now is all i need. If u need i will test it but then i probably go back.
Inviato dal mio LG-D855 utilizzando Tapatalk
lila73 said:
I have read of Rin kernel, but i prefer to remain on stock, the one without oversharpening for me now is all i need. If u need i will test it but then i probably go back.
Inviato dal mio LG-D855 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, could you test it for me? I would really appreciate it.
I can't test it myself since I'm running AOSP and his kernel is only for OUI.
Welcome in thread of Modified Cyanogenmod 12.1
Only for D620r!
Basic Informations
This is modificated Cyanogenmed 12.1 final build from 19.11.2015. I did it with permission of @Nikita Pro Android . Every credits go to @Nikita Pro Android! I did it for those, who are lazy installed all modifications yourself or for those, who wants a little more from perfect Nikitas rom. I tried find balance between performance and battery life. Rom is stable and ready for daily use.
FEATURES
- Last build of CM 12.1
- New ABS tweaks - seems more effective than L speed mod
- Based on latest Nova launcher (free version)
- Viper4Android + Extreme beats - perfect sound output (set up by me, if you wanted,you could change values in Viper)
- Walkman music player
- Adblock - blocking annoying adds (included in ABS)
- Xposed v78 included - installed modules : Youtube Background Playback, Greenify, Album art remover from lockscreen
- Next camera + panorama (fixed)
- App Root Booster (for battery life and performance,free version)
- Google play drain fixed
- Motorola Razr circle widget + weather (more here)
- Xperia keyboard (more informations HERE)
- few changes in Kernel audiutor by me
- Themes here: CLICK
Bugs
HERE
Installation
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
No BOOTSTACK reqiured! Installation possible from Lollipop and of course from Kitkat!
1. Download rom and unrar it.
2. Connect your phone to PC, copy unrared package to TWRP >> BACKUP (no matters external or internal storage)
3. Go to recovery >> wipe system, data, cache (recommended)
4. Go to restore and restore package.
5. Reboot.
If you wanted, you could wipe only system, cache - you won't lost data. (Only from CM 12.1 and maybe CM 13.)
If recovery doesn't see backup, you have to rename the folder <LGD620dfad47d3> with the name of your earlier backup.
Downloads
NEW ROM: HERE
To change ABS values open Terminal emulator and type:
su
ABS
I'm not developer! I just try get most of this perfect rom!
More informations, all sources, etc HERE
If you had some suggestions, ideas, etc, you could post here
Thanks to:
@Nikita Pro Android and @Quarx - for perfect rom
and all developers, who made: Xposed, Viper4Android, Extreme beats, ABS, Root Booster etc.
Sorry for my English, I'm not native speaker
Enjoy!
I come from stock 4.4.2 , can i install it anyway or i have to upgrade to stock 5.0.2 ?
simo14 said:
I come from stock 4.4.2 , can i install it anyway or i have to upgrade to stock 5.0.2 ?
Click to expand...
Click to collapse
You can install from your kikat with twrp, recommend full wipe from stock!
Enviado de meu LG-D618 usando Tapatalk
simo14 said:
I come from stock 4.4.2 , can i install it anyway or i have to upgrade to stock 5.0.2 ?
Click to expand...
Click to collapse
OP udpated
i'm trying to install it but in TWRP it say there's nothing to restore
Inviato dal mio iPad utilizzando Tapatalk
simo14 said:
i'm trying to install it but in TWRP it say there's nothing to restore View attachment 3511053
Inviato dal mio iPad utilizzando Tapatalk
Click to expand...
Click to collapse
Change storage,click on Internal storage button. You copy it on external sdcard i think.
dado_13 said:
Change storage,click on Internal storage button. You copy it on external sdcard i think.
Click to expand...
Click to collapse
now i'm copying the files on the microsd with my pc and then i will try restore from SD
Inviato dal mio iPad utilizzando Tapatalk
simo14 said:
now i'm copying the files on the microsd with my pc and then i will try restore from SD
Inviato dal mio iPad utilizzando Tapatalk
Click to expand...
Click to collapse
report me, if it works
dado_13 said:
report me, if it works
Click to expand...
Click to collapse
still nothing...
Inviato dal mio iPad utilizzando Tapatalk
In sd card you should have folder TWRP. Unrar downloaded file, and copy file BACKUP to TWRP folder. After that,make nandroid backup!
i think i found the solution, now i'm going to try
Inviato dal mio iPad utilizzando Tapatalk
simo14 said:
i think i found the solution, now i'm going to try
Inviato dal mio iPad utilizzando Tapatalk
Click to expand...
Click to collapse
Waiting for report
[ROM][5.1.1][D620r] Modificated CM 12.1
dado_13 said:
Waiting for report
Click to expand...
Click to collapse
the serial number wroten in the log is yours , so the Twrp need the mine or it can't recognize the backup
Inviato dal mio iPad utilizzando Tapatalk
simo14 said:
the serial number wroten in the log is yours , so the Twrp need the mine or it can't recognize the backup
Inviato dal mio iPad utilizzando Tapatalk
Click to expand...
Click to collapse
So it don't work? I saw many threads with restore package and any people have problem with this.
[ROM][5.1.1][D620r] Modificated CM 12.1
it FINALLY work , i had to rename the folder BACKUPS<folder<... with my serial number token from a mine backup ATTACH]3511096[/ATTACH]
Inviato dal mio iPad utilizzando Tapatalk
simo14 said:
it FINALLY work View attachment 3511096
Inviato dal mio iPad utilizzando Tapatalk
Click to expand...
Click to collapse
Good and recommended,do restore package of your current rom,if go something wrong!
[ROM][5.1.1][D620r] Modificated CM 12.1
dado_13 said:
Fu and, recommended,do restore package of your current Rom,if go something wrong!
Click to expand...
Click to collapse
i did no backup because to install this rom i had to flash the v10j kdx from v20b (because i couldn't root it), so i did a fresh install and now works fine
P.S. please update the OP with the full instructions to install it so everyone can install it in few time , i lost <2 hours to do it
Inviato dal mio iPad utilizzando Tapatalk
simo14 said:
i did no backup because to install this rom i had to flash the v10j kdx from v20b (because i couldn't root it), so i did a fresh install and now works fine
P.S. please update the OP with the full instructions to install it so everyone can install it in few time , i lost <2 hours to do it View attachment 3511104
Inviato dal mio iPad utilizzando Tapatalk
Click to expand...
Click to collapse
Congratulation, if anyone else have this problem,I will
In init.d file location i see some extra scripts.. Can you tell me from what mod/tweak are?
Edit: I saw it now on the First post....
Rom udpated! See OP!!
This thread is outdated, Oreo port will be uploaded to this other thread from now on.
Download link 7.11.18:
Mega
Baidu
Android One Nougat 7.12.19 is out but not ported. However, you can install it using my modded TWRP
https://forum.xda-developers.com/mi...rp-3-1-1-0-t3715084/post74745680#post74745680
How to install:
- Unlock bootloader
- Flash TWRP
- Wipe data, cache and dalvik
- Flash A1 Firmware
- Flash rom zip file
- Reboot
How to update
- Boot into TWRP
- Wipe cache and dalvik/art
- Flash rom zip file
- Reboot
Known issues:
- If you dont flash A1 firmware your fingerprint will acts as a button while unlocked.
- If you don't have Goodix fingerprint variant, fingerprint may not work.
- You tell me.
FAQ:
Q: Can I flash over August patch without wiping data?
A: Yes, you can. However WiFi may not work. If that's your case try restoring network settings. (Settings -> More -> Restore network settings). If WiFi still doesnt work, you'll need to wipe data.
Q: Can I update via OTA?
A: No, you can't. You'll need to wait until I port the update.
Q: Does this ROM come pre-rooted
A: No, it's the A1 stock rom which doesn't come rooted. If you want root, flash Magisk through TWRP
Q: Can I install Xposed?
A: Yes, you can. Just make sure you download xposed for SDK 25.
Q: Will this rom unlock 4G 800MHz band (B20)?
A: No, it won't unlock it. Mi A1 uses a different modem which supports it. Mi 5X modem doesn't.
Q: Do I need to unlock my bootloader?
A: Yes, you need to unlock the bootloader before you can install any custom ROM.
Q: How can I unlock my bootloader?
A: Apply for permissions on http://en.miui.com/unlock/ then download the tool and follow the steps.
Q: Where can I download TWRP?
A: You can download it from here
Donations:
If you like my work and want to contribute, you can donate via paypal.me/aex12
XDA:DevDB Information
Android One Port Nougat, ROM for the Xiaomi Mi 5X
Contributors
Aex12
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: Android One
Version Information
Status: Stable
Current Stable Version: 7.11.18
Stable Release Date: 2017-11-24
Created 2017-10-21
Last Updated 2018-03-07
Reserved
anyone know if it is possible to sideload the ota updates maybe??
---------- Post added at 03:30 PM ---------- Previous post was at 03:15 PM ----------
looks like it would be ok to dirty flash this hmm...
killswitx said:
anyone know if it is possible to sideload the ota updates maybe??
Click to expand...
Click to collapse
As stated on FAQs, you cant update via OTA, as this OTAs are made for an A/B device, and Mi 5X doesnt support A/B.
killswitx said:
looks like it would be ok to dirty flash this hmm...
Click to expand...
Click to collapse
It's OK if you come from another Android One port. Probably you will face some WiFi issues, to solve them read FAQs.
thanks
thanks but Are you sure you will let Android O run in this device??
adeljck said:
thanks but Are you sure you will let Android O run in this device??
Click to expand...
Click to collapse
I cant say it for sure. Will see when it's released for the A1 if it can be ported.
OMG! You're an angel!!
---------- Post added at 04:55 AM ---------- Previous post was at 04:48 AM ----------
@Aex12 is this rom pre-rooted?
I was waiting for this!! THANK YOU SO MUCH!!
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
alekos panagulis said:
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
Click to expand...
Click to collapse
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Aex12 said:
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Click to expand...
Click to collapse
No wifi issue.
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
jonjon88 said:
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
Click to expand...
Click to collapse
You can make camera a little better by downloading the Google Camera modded with HDR+ and adding these two lines to build.prop:
Code:
persist.camera.HAL3.enabled=1
persist.camera.eis.enable=1
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
rEsonancE_0404 said:
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
Click to expand...
Click to collapse
Probably it can be done. Just ask a dev who have Note 4X to port it.
Aex12 said:
You can make camera a little better downloading the Google Camera modded with HDR+ and adding these two lines to the build.prop:
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
Probably it can be done. Just ask a dev who have Note 4X to port it.
Click to expand...
Click to collapse
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
alekos panagulis said:
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
Click to expand...
Click to collapse
The slow fingerprint sensor is an A1 related issue. Maybe it get improved in the future with updates.
rEsonancE_0404 said:
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
Click to expand...
Click to collapse
I dont use any kind of AIO software. I use a bunch of linux tools and use them through CLI.
I use simg2img and make_ext4fs for the system.img and mkbootimg and unpackbootimg for the boot.img
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
alekos panagulis said:
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Aex12 said:
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Click to expand...
Click to collapse
Oh wow! Please consider to introduce this feature, please!! You could make a copy of Mi A1 and one more rom with experimental features. You would be my hero.
Inviato dal mio Mi A1 utilizzando Tapatalk
Update 9/7/18 - Now possible to have full Xperia X official version support on XC, including Android apps and OTA update. See post by g7 in this thread in Jolla forum - https://together.jolla.com/question/185922/sailfish-os-on-sony-xperia-x-compact/
Requires official Sailfish X system image,, which can only legally be obtained from Jolla by buying a licence for 50 Euros. Once you have the image, download and unzip g7's patcher, and copy image to same folder and run the patcher.. Then fastboot the rom using the same instructions as for the community port below.
--------------------------------------
Here is the info for community port, (v. 2.1.3.7, no license required, no official Android support, no ota):
Check it out - https://together.jolla.com/question/180109/announcement-community-sony-xperia-x-compact-release/
Not my work, I just found it. I downloaded, but won't be able to test until tomorrow. It's not a flashable, instructions to flash via fastboot are included in the zip.
If anyone beats me to it, post here and let us know...
Flashed successfully and working well. Auto flash didn't work for me on Win10. I had to make a modification to bat script, and didn't work anyway, so had to flash fastboot commands manually.
Working: cellular, wifi, mobile data, gps, bluetooth, sensors... Call volume is good.
- Download zip from link above and extract
- Download oem image from Sony site linked in README file in zip, and extract to sailfish folder
- Open cmd, and cd to sailfish directory to flash
Code:
fastboot flash boot hybris-boot.img
fastboot flash system fimage.img001
fastboot flash userdata sailfish.img001
fastboot flash oem (name of Sony oem file).img
Done
So far my experience:
Very impressive. Much better than the Firefox OS and Ubuntu touch ports, etc, that I've tried on Xperias in the past. Main issues for me are,
- camera not so good in low light, (good in good light)
- limited system app options, (alternative browsers, keyboards, etc.). There is functiining Jolla app store, with some good apps, as well as dev-type repos, like warehouse, and openrepo, with patches, etc, but I find the system apps kind of laggy/buggy. Hopefully more development coming
- app switching/multitasking cumbrersome. In general, don't expect anything like android. It's all gestures and no buttons. Probably actually better than I realize, but takes getting used to.
pros,
- Really nice ui, and lots of customization options. I've just started figuring out a little bit.
- boot time is less than 10 seconds, (about 2 or 3 seconds after Sony logo).
- good experience so far with support forums
- potentially capable of using android apps. Sailfish has a service called aliendalvik that can run Android apps. I can't tell yet if it works on this phone, though. It seems like it doesn't, out of the box, but maybe could... (update 5/24 - see here for working Android files: https://forum.xda-developers.com/showpost.php?p=76612066&postcount=71).
Can't get it to flash. Script is written to look for 228 fw, (N), so flashing with O causes 'wrong version' error. I downgraded to 228 to test, but script just starts, and then closes without doing anything. I also tried changing batch script to look for different version, but didn't help. I wonder if it's a Win10 issue..
success. needed to edit batch script and flash commands automatically.
Going to update op with instructions
Sensproof said:
Wow! Thanks for sharing! Will try flashing it tonight
UPD: Flashed successfully. Works great! Even Android Support(tm) works (after installing RPMs from Sailfish X)
Bugs so far:
- Sometimes the screen won't react to touches after unlocking. Solved after locking the device again and then unlocking it
Click to expand...
Click to collapse
I've noticed screen responsiveness a little dull in general, but liking it overall...
Sensproof said:
After using it for one day in seems the lockscreen bug was caused by double tap to wake option, which i had enabled earlier from the command line. The bug is gone after disabling the function.
One more thing to consider if you want to install Sailfish is camera quality: there are problems with focusing in low light (seems to be a problem on Xperia X as well: https://together.jolla.com/question...focus-or-picture-sharpness-seems-non-optimal/). It will probably be fixed in the next build though
Click to expand...
Click to collapse
Noticed the same after 2 days. Too bad really, because in good light, the camera is very good.
Going to add review in op...
stupid question: I need the boot loader unlocked?
Sensproof said:
Wow! Thanks for sharing! Will try flashing it tonight
UPD: Flashed successfully. Works great! Even Android Support(tm) works (after installing RPMs from Sailfish X)
Bugs so far:
- Sometimes the screen won't react to touches after unlocking. Solved after locking the device again and then unlocking it
Click to expand...
Click to collapse
allready installed SailfishOS on my xcompact, I love it, A question sir, where do you get that RPM for the android support(tm) ???
THANKS!!
ramirowski said:
allready installed SailfishOS on my xcompact, I love it, A question sir, where do you get that RPM for the android support(tm) ???
THANKS!!
Click to expand...
Click to collapse
as posted in op, not sure if available for this phone. Seems like there is official support from Jolla for Xperia X, (search for SailfishX), but it's a paid service, and only officially available in certain countries. For unofficial support, you just have to search...
For me not work i have flash 7.1 firmaware unluck bootloader after i have downloaded oem 7.1.1 v13 after flash all guide logo sony and bootloop.. Any help? thx
Inviato dal mio D6603 utilizzando Tapatalk
Franco_Sposato said:
For me not work i have flash 7.1 firmaware unluck bootloader after i have downloaded oem 7.1.1 v13 after flash all guide logo sony and bootloop.. Any help? thx
Inviato dal mio D6603 utilizzando Tapatalk
Click to expand...
Click to collapse
Did all fastboit commands return successful, (ok)? If ao, try a different vendor img. There are several to choose from. I flashed from O, but the oem file was for N. Also, try using script first. Flash manually only if you have to.
levone1 said:
Did all fastboit commands return successful, (ok)? If ao, try a different vendor img. There are several to choose from. I flashed from O, but the oem file was for N. Also, try using script first. Flash manually only if you have to.
Click to expand...
Click to collapse
I have flash oem...mm...n...oreo...bootloop yes after run all image is all ok..but don t boot.
Scrips bat don t work windows 7
Inviato dal mio D6603 utilizzando Tapatalk
Franco_Sposato said:
I have flash oem...mm...n...oreo...bootloop yes after run all image is all ok..but don t boot.
Scrips bat don t work windows 7
Inviato dal mio D6603 utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry, not sure. .. Maybe try starting from O. I've been using it for a week now, and really like it. Don't even want to go back yet. ..
levone1 said:
Sorry, not sure. .. Maybe try starting from O. I've been using it for a week now, and really like it. Don't even want to go back yet. ..
Click to expand...
Click to collapse
Whitc oem you are using? Loire 4.4 kernel or 3.4?
Inviato dal mio D6603 utilizzando Tapatalk
---------- Post added at 03:51 PM ---------- Previous post was at 03:48 PM ----------
levone1 said:
Sorry, not sure. .. Maybe try starting from O. I've been using it for a week now, and really like it. Don't even want to go back yet. ..
Click to expand...
Click to collapse
I tried from oreo but nadaaaa
Inviato dal mio D6603 utilizzando Tapatalk
Franco_Sposato said:
Whitc oem you are using? Loire 4.4 kernel or 3.4?
Inviato dal mio D6603 utilizzando Tapatalk
Click to expand...
Click to collapse
I used "SW_binaries_for_Xperia_AOSP_N_MR1_3.10_v13_loire", coming from clean flash 8.0, (not the latest version, but the previous update, [Feb. patch]).
thanks for your help I gave up I'm not lucky I would have liked to try it
Inviato dal mio D6603 utilizzando Tapatalk
levone1 said:
I used "SW_binaries_for_Xperia_AOSP_N_MR1_3.10_v13_loire", coming from clean flash 8.0, (not the latest version, but the previous update, [Feb. patch]).
Click to expand...
Click to collapse
One question you are downloaded all file or only zip file? I have only zip file
Inviato dal mio F5321 utilizzando Tapatalk
Franco_Sposato said:
One question you are downloaded all file or only zip file? I have only zip file
Inviato dal mio F5321 utilizzando Tapatalk
Click to expand...
Click to collapse
the download is a zip file with an img file inside. You need to extract the img to flash it.
levone1 said:
the download is a zip file with an img file inside. You need to extract the img to flash it.
Click to expand...
Click to collapse
Yes i have only zip file estract in the folder on desktop
Inviato dal mio F5321 utilizzando Tapatalk
Franco_Sposato said:
Yes i have only zip file estract in the folder on desktop
Inviato dal mio F5321 utilizzando Tapatalk
Click to expand...
Click to collapse
extract the img file in the zip into the same durectory with Sailfish files, then fastboot flash each one according to instructions in op, (4files).
levone1 said:
extract the img file in the zip into the same durectory with Sailfish files, then fastboot flash each one according to instructions in op, (4files).
Click to expand...
Click to collapse
Yes i have flash all ok but bootloop i m not Lucky hahahha
Inviato dal mio F5321 utilizzando Tapatalk
Does anyone have or found one that works maybe? Or can anyone port the Original stock camera please?
Diamondew said:
Does anyone have or found one that works maybe? Or can anyone port the Original stock camera please?
Click to expand...
Click to collapse
I'm in need of the same!
We need stock camera from other device, a7 cam is very orrible
Inviato dal mio SM-G950F utilizzando Tapatalk
Should I extract them with titanium?
I uploaded the camera here. I am using AOSP 9.0 but for me it is not installing, I tried installing it manually in my system apps but I am not that experienced so maybe someone else can try? https:||gofile.io|?c=7CsvsI (replace | with / because I am not able to post links yet (new member))
I could enable 24 megapixels on the camera with a magisk module, but I couldn't install the stock camera with titanium backup.
This is the module:
forum.xda-developers.com/galaxy-s8/themes/magisk-samsung-4k60-camera-mod-uhd-60-t3883816/amp/
Me neeed too
Diamondew said:
Does anyone have or found one that works maybe? Or can anyone port the Original stock camera please?
Click to expand...
Click to collapse
You just can't install the Stock Camera APK. For stock camera to work on GSI ROMs stuff needs to be hacked at framework level. We need get a dev interested in it to do that.