Hi,
I tried to root the device. I couldn't get past the opening screen. Digital clock and indicators in front was working. Then, I installed software that does not belong to the product and the situation has deteriorated. Now the opening screen is not coming. The digital clock or indicators in front do not work. When the device is connected to the computer, the computer is seeing the device as an unknown device. Do you think there's anything to do with this device?
I tried to install the software with the application called Phoneixusbpro. The setup is not completing, giving error after progressing up to 72%.
The device When connected to PC, device's name is "USB Device(VID_1f3a_PID_efe8)"
product features:
GPU: Mali-T720
System: Android 7.0
CPU: Allwinner H6
Core: Quad Core
cmlmstf said:
Hi,
I tried to root the device. I couldn't get past the opening screen. Digital clock and indicators in front was working. Then, I installed software that does not belong to the product and the situation has deteriorated. Now the opening screen is not coming. The digital clock or indicators in front do not work. When the device is connected to the computer, the computer is seeing the device as an unknown device. Do you think there's anything to do with this device?
I tried to install the software with the application called Phoneixusbpro. The setup is not completing, giving error after progressing up to 72%.
Click to expand...
Click to collapse
Check the other forum post. I made some changes.
https://forum.xda-developers.com/an...ters/amlogic/eachlink-h6-mini-tv-box-t3871978
cmlmstf said:
Hi,
I tried to root the device. I couldn't get past the opening screen. Digital clock and indicators in front was working. Then, I installed software that does not belong to the product and the situation has deteriorated. Now the opening screen is not coming. The digital clock or indicators in front do not work. When the device is connected to the computer, the computer is seeing the device as an unknown device. Do you think there's anything to do with this device?
I tried to install the software with the application called Phoneixusbpro. The setup is not completing, giving error after progressing up to 72%.
Click to expand...
Click to collapse
Can you please say what you install and how you manage to see the box in phoenixusbpro?
79SA79 said:
Can you please say what you install and how you manage to see the box in phoenixusbpro?
Click to expand...
Click to collapse
thank you for reply, I see the device as in picture
https://ibb.co/92Gqxh7
https://ibb.co/5nxDyNW
cmlmstf said:
thank you for reply, I see the device as in picture
https://ibb.co/92Gqxh7
https://ibb.co/5nxDyNW
Click to expand...
Click to collapse
So you’re saying it fails? Reboot your PC and try again. You can also try to run the Phoenix software as an administrator.
Rccm112 said:
So you’re saying it fails? Reboot your PC and try again. You can also try to run the Phoenix software as an administrator.
Click to expand...
Click to collapse
i have tried a lot of times. I have tried on different operating systems (win10 -win8.1). unfortunately the result is the same.
Thank you very much for your all reply.
I think, it can't install the bootloader files.
file in picture
https://ibb.co/pWJLvxM
cmlmstf said:
thank you for reply, I see the device as in picture
https://ibb.co/92Gqxh7
https://ibb.co/5nxDyNW
Click to expand...
Click to collapse
Finally worked ... I have manage to flash a bricked box and now is working even better. I can confirm that box can be flashed with image from russian link above. I used latest phoenixusbpro.
79SA79 said:
Finally worked ... I have manage to flash a bricked box and now is working even better. I can confirm that box can be flashed with image from russian link above. I used latest phoenixusbpro.
Click to expand...
Click to collapse
exactly what was the status of your device
79SA79 said:
Finally worked ... I have manage to flash a bricked box and now is working even better. I can confirm that box can be flashed with image from russian link above. I used latest phoenixusbpro.
Click to expand...
Click to collapse
Were the digital indicators on the front panel working when your device was in a brick state?
79SA79 said:
Finally worked ... I have manage to flash a bricked box and now is working even better. I can confirm that box can be flashed with image from russian link above. I used latest phoenixusbpro.
Click to expand...
Click to collapse
yes?
cmlmstf said:
yes?
Click to expand...
Click to collapse
Yes .. I have manage to brick the box by installing last google play and store. On reset the box has all led up and logo on screen for indefinite time. I download image from the russian website and follow the instruction. I didn't have the usb/usb cable first, didn't know.
The box work even better now, in 4k 60k 10b is very very responsive, I did several tests and it seems that is't very sluggish if is not in native mode resolution. I install last google play and store thru luckypacker and everything works really really great after few tweaks like clean startup and cpu in performance mode.
The remote is dead on the other hand, and occasionally become unresponsive with many app working.
79SA79 said:
Yes .. I have manage to brick the box by installing last google play and store. On reset the box has all led up and logo on screen for indefinite time. I download image from the russian website and follow the instruction. I didn't have the usb/usb cable first, didn't know.
The box work even better now, in 4k 60k 10b is very very responsive, I did several tests and it seems that is't very sluggish if is not in native mode resolution. I install last google play and store thru luckypacker and everything works really really great after few tweaks like clean startup and cpu in performance mode.
The remote is dead on the other hand, and occasionally become unresponsive with many app working.
Click to expand...
Click to collapse
Thank you for reply. Installation does not complete on my device
cmlmstf said:
Thank you for reply. Installation does not complete on my device
Click to expand...
Click to collapse
Are you pressing start on PhoenixUSB before connecting to your PC?
79SA79 said:
Yes .. I have manage to brick the box by installing last google play and store. On reset the box has all led up and logo on screen for indefinite time. I download image from the russian website and follow the instruction. I didn't have the usb/usb cable first, didn't know.
The box work even better now, in 4k 60k 10b is very very responsive, I did several tests and it seems that is't very sluggish if is not in native mode resolution. I install last google play and store thru luckypacker and everything works really really great after few tweaks like clean startup and cpu in performance mode.
The remote is dead on the other hand, and occasionally become unresponsive with many app working.
Click to expand...
Click to collapse
Rccm112 said:
Are you pressing start on PhoenixUSB before connecting to your PC?
Click to expand...
Click to collapse
yes, I am pressing. I think, the condition of my device is different.the opening screen is not coming. The digital clock or indicators in front do not work.
Related
Bought a ZTE V965 because it was a special offer and I wanted to give android a try. Nice phone for the money, hardware wise, but software wise it needed some work. No google apps! I rooted the phone with vroot, worked fine. Installed SuperSU and CWM, seemed fine, but CWM is not fully functional. When I boot in restore mode, it doesnt mention CWM, it seems to be the native restore mode.
Tried to install google apps as APK's, but this didnt work. Play store closes instantly. Can't login chrome. Tried to install gapps.zip in recovery mode, error message, not working. I gave the phone a factory reset a few times during all this, and that worked fine.
Then I read a guide for manually installing gapps to the system app folder.
http://forum.xda-developers.com/showthread.php?t=2428314
So I installed root explorer, and put several gapps files in the system app folder:
OneTime Initializer.apk
GoogleLoginService.apk
Google Services Framework.apk
Setup Wizard.apk
Gmail.apk
Still not working though, gmail app crashes.
So I wanted to factory reset again, to start with a blank canvas. Big mistake!!! After the factory reset, the google files are not removed! Now when I boot the phone the setup wizard starts and crashes. I haven't found a way to get around it. What makes things worse, the phone is no longer detected when connected to my PC. Before ADB toolkit would detect the phone, no problem. Now nothing.
Any ideas what I can do? All that is necessary (I expect) is that this setupwizard is killed/bypassed/whatever, but I can't figure out how to do it.
I can get into the emergency number dialer, maybe something is possible from there?
Well, as always, immediately after posting, I made some progress! I booted the phone, and got a low battery warning, from which I could access the settings and enable USB debugging. Now I have ADB toolkit connected again. Also, I went into application settings, to kill and disable all these gapps. I managed to do this for all but one, the biggest problem: setupwizard.apk. Maybe because it's running i can't disable it? The option is greyed out. So when I reboot, I still get the setup wizard that crashes.
However, I do have what i believe is a stock ROM (from a chinese website, hard to be sure, but the name suggests it). Might try to flash that one using adb-toolkit.
Finally managed to fix it using linux shell. Killed the setupwizard task, deleted all gapps from system/app, problem solved.
Still would very much like to have working Gapps though. Hopefully this phone will become more popular outside China, so more people will look into flashing it. I've tried, but I can't do it. No fastboot drivers, and the native flash method (putting update.zip on phoen storage) doesn't work. For now I'll stick with the stock ROM and just use it in it's very limited state.
chance you can put a link to that stock ROM you found?
jethrofox said:
chance you can put a link to that stock ROM you found?
Click to expand...
Click to collapse
ROM:
http://www.romjd.com/Rom/Detail/17086
Root & Flash tool (I suspect):
http://dl.vmall.com/c0xa12brvo
I am still trying to figure out that romaster tool. Rooting is simple, but i can't manage to flash a ROM. Please keep me updated if you make any progress
Managed to fix everything + install CWM + flash ROM + install google apps. Will make a topic for this phone soon, when I've finished testing everything.
For now, check this one:
http://forum.xda-developers.com/showpost.php?p=48789159&postcount=15
Please my hero! Share your knowledge with me!
Byte_Me said:
Managed to fix everything + install CWM + flash ROM + install google apps. Will make a topic for this phone soon, when I've finished testing everything.
For now, check this one:
http://forum.xda-developers.com/showpost.php?p=48789159&postcount=15
Click to expand...
Click to collapse
Hello Byte_Me,
I've been looking for weeks how to get GApps on my ZTE V965 and tried everything I could, but each time with a different error. Today you made my day to let me know that I'm not the only one with this problem. Since no-one seems to use this device I wasn't able to find any working tutorial to fix Google Apps on this chinese android. I really hope you can tell me soon how you did this, so I can finally move on. Could you please send the link to your topic when you publish it? Thanks in advance and have a MERRY CHRISTMAS and a HAPPY NEWYEAR!!!
Thys-Its said:
Hello Byte_Me,
I've been looking for weeks how to get GApps on my ZTE V965 and tried everything I could, but each time with a different error. Today you made my day to let me know that I'm not the only one with this problem. Since no-one seems to use this device I wasn't able to find any working tutorial to fix Google Apps on this chinese android. I really hope you can tell me soon how you did this, so I can finally move on. Could you please send the link to your topic when you publish it? Thanks in advance and have a MERRY CHRISTMAS and a HAPPY NEWYEAR!!!
Click to expand...
Click to collapse
all info is already in the link you quoted, just not very organized. The topic will take some time, on holidays now.
followed your instructions, now thank god the Google Play works, but the Google search bar and Gmail app are still crashing...
you had similar things ?
---------- Post added at 06:01 PM ---------- Previous post was at 05:16 PM ----------
sctrach that - just updated the buggy apps through the Google Play.
Woo-hoo!
Nice to hear that, it makes the phone a lot more usable, doesnt it?
Any problems? I am still not satisfied, but I guess it's a work in progress.
Annoyances:
- not recognizing callers, some incompatibilities caused by country prefixes in my address book
- no badge notifications on icons, makes it harder too see missed calls, have to look at status bar
- some other stuff i can't think of now
Nice to hear that, it makes the phone a lot more usable, doesnt it?
Any problems? I am still not satisfied, but I guess it's a work in progress.
Annoyances:
- not recognizing callers, some incompatibilities caused by country prefixes in my address book
- no badge notifications on icons, makes it harder too see missed calls, have to look at status bar
- some other stuff i can't think of now
Byte_Me said:
Nice to hear that, it makes the phone a lot more usable, doesnt it?
Any problems? I am still not satisfied, but I guess it's a work in progress.
Annoyances:
- not recognizing callers, some incompatibilities caused by country prefixes in my address book
- no badge notifications on icons, makes it harder too see missed calls, have to look at status bar
- some other stuff i can't think of now
Click to expand...
Click to collapse
Tried reading through all the links, still can't get the light to turn green on mtk tools. V 965 is rooted by the Romjd app. Downloaded the rom rated 9.5. Installed the Vcom driver.
Can't load scatter files in sp flash tool..
Quite the noob at this stuff and guidance would be great. I did install ZTE driver when i connected the phone. Was that a mistake?
Tonypas said:
Tried reading through all the links, still can't get the light to turn green on mtk tools. V 965 is rooted by the Romjd app. Downloaded the rom rated 9.5. Installed the Vcom driver.
Can't load scatter files in sp flash tool..
Quite the noob at this stuff and guidance would be great. I did install ZTE driver when i connected the phone. Was that a mistake?
Click to expand...
Click to collapse
I never used SP flash tool.
Make sure phone is rooted.
Use MTK tools to install CWM zip package (just follow the instructions: http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417)
Boot into CWM and install google apps zip package.
I think USB debugging must be switched on in settings.
Byte_Me said:
I never used SP flash tool.
Make sure phone is rooted.
Use MTK tools to install CWM zip package (just follow the instructions: http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417)
Boot into CWM and install google apps zip package.
I think USB debugging must be switched on in settings.
Click to expand...
Click to collapse
Ok Thanks, I will try again.
I used SP flash tool because the yellow light never turned green. Which version of MTK Tools did you use?
yo, anybody managed to work with the GPS?
mine acts as if there isn't a GPS antenna at all.
Tonypas said:
Ok Thanks, I will try again.
I used SP flash tool because the yellow light never turned green. Which version of MTK Tools did you use?
Click to expand...
Click to collapse
252b
no green light means no root, but rooting is just one click.
jethrofox said:
yo, anybody managed to work with the GPS?
mine acts as if there isn't a GPS antenna at all.
Click to expand...
Click to collapse
Mine was very slow, fixed it with mobileuncle
Byte_Me said:
252b
no green light means no root, but rooting is just one click.
Click to expand...
Click to collapse
Its definitely rooted something else is missing.
jethrofox said:
yo, anybody managed to work with the GPS?
mine acts as if there isn't a GPS antenna at all.
Click to expand...
Click to collapse
Check with engineer mode that actual gps driver is loaded. Some roms don't have that driver such as lewa5 to my knowledge. Attached a pic below
Tonypas said:
Its definitely rooted something else is missing.
Click to expand...
Click to collapse
Color doesn't really matter, in you're rooted you should be able to log into the terminal feature in MTKtool. Try it
Help please
Guys whatever i soft or hard bricked my v965. It's stuck on the opening ZTE logo. I can't get into recovery mode to wipe the cache.
The ZTE drivers are not loading i guess cause its not in usb debugging mode. Been at this hours and i'm lost.
Any advice?
Just got the update from Wind in Canada. Still Android 5.1, don't know what's new.
Plzzz check any side effects on the camera quality.
most likely just the April security update
US Generic has update too.
I tried to flash the new firmware using flashtool. It gave errors and now the phone has been softbricked. I don't know what happened. Flashtool doesn't recognises the phone now and asks to install drivers for the device. I installed the drivers from sony's website but the issue persists.
Please help.
arjun.arora said:
I tried to flash the new firmware using flashtool. It gave errors and now the phone has been softbricked. I don't know what happened. Flashtool doesn't recognises the phone now and asks to install drivers for the device. I installed the drivers from sony's website but the issue persists.
Please help.
Click to expand...
Click to collapse
Try Sony Phone Companion.
mingkee said:
Try Sony Phone Companion.
Click to expand...
Click to collapse
Nothing works buddy. PC companion doesn't recognize the phone. It's not going in fastboot or flashmode, the red light turns on whenever I attach it to the laptop, nothing else happens.
arjun.arora said:
Nothing works buddy. PC companion doesn't recognize the phone. It's not going in fastboot or flashmode, the red light turns on whenever I attach it to the laptop, nothing else happens.
Click to expand...
Click to collapse
You need to press the "Vol -" on your phone before plugging it on the USB. Make sure you DIDN'T update the Flashtool to last version. You have to use the version 0.9.19.8 and before you flash, select the buffer size to 128K. I bricked my phone once and I could recover it.
I hope this revives your phone. Good luck!
BugKiller89 said:
You need to press the "Vol -" on your phone before plugging it on the USB. Make sure you DIDN'T update the Flashtool to last version. You have to use the version 0.9.19.8 and before you flash, select the buffer size to 128K. I bricked my phone once and I could recover it.
I hope this revives your phone. Good luck!
Click to expand...
Click to collapse
As I mentioned earlier buddy, it doesn't go into flash mode or fast mode. Flashtool doesn't recognize the device.
Mine is rooted and update via OTA fail. Tried PC companion and updated successfully. As expected, root lost. Android security update is for Feb only. Cant tell any difference from the previous firmware.. softkey doesnt change either, annoying flicker is still there before playing a video if u had adjusted the colour manually .. Not sure if its a worthy "update".... going to try root again via kingroot.
scpion said:
Mine is rooted and update via OTA fail. Tried PC companion and updated successfully. As expected, root lost. Android security update is for Feb only. Cant tell any difference from the previous firmware.. softkey doesnt change either, annoying flicker is still there before playing a video if u had adjusted the colour manually .. Not sure if its a worthy "update".... going to try root again via kingroot.
Click to expand...
Click to collapse
I can tell battery is improved.
Easy 4 hours screen on time.
mingkee said:
I can tell battery is improved.
Easy 4 hours screen on time.
Click to expand...
Click to collapse
the battery improvement i got it when shifting from 5.0 to 5.1 (29.1.b.0.87)
i can easily with full battery reach > 7 hours screen on time till 20% of battery
hope to get more improvemnt yet
mingkee said:
I can tell battery is improved.
Easy 4 hours screen on time.
Click to expand...
Click to collapse
Erm.. 4hrs is quite terrible.. What have u been with your phone... :/
scpion said:
Erm.. 4hrs is quite terrible.. What have u been with your phone... :/
Click to expand...
Click to collapse
What do you think?
Note: I played about an hour of Candy Crush Saga.
mingkee said:
What do you think?
Note: I played about an hour of Candy Crush Saga.
Click to expand...
Click to collapse
I would like to report that king root still works for this device after the update. So does switching over to supersu.
scpion said:
I would like to report that king root still works for this device after the update. So does switching over to supersu.
Click to expand...
Click to collapse
It didn't work out at first and the phone had problems, but I run Sony Companion to update once more and it went through perfectly. After that, everything went smoothly.
mingkee said:
What do you think?
Note: I played about an hour of Candy Crush Saga.
Click to expand...
Click to collapse
u should calibrate ur battery. it seems that battery doesnt replaced at all(%100) i get 5 hours till %40
arjun.arora said:
As I mentioned earlier buddy, it doesn't go into flash mode or fast mode. Flashtool doesn't recognize the device.
Click to expand...
Click to collapse
I'm in the same boat too. Now my C5 Ultra only has a red light when I plug it into the USB and nothing can bring it back to life.
Any help much appreciated please, please.....:crying:
flightsimmer01 said:
I'm in the same boat too, made the mistake of not reading this first. Flashed it using 09.20.0 and now my C5 Ultra only has a red light when I plug it into the USB and nothing can bring it back to life.
Any help much appreciated please, please.....:crying:
Click to expand...
Click to collapse
I had to take it to sony service center, they didn't asked me many questions. I told them I was trying to update it using pc companion and it just went dead. They fixed the phone in 5 days and returned it. The funny thing is that I had unlocked its bootloader a long time ago so it should've been out of warranty, also, the IMEI numbers have changed and the drm keys and functions have been restored. Can't believe my luck...
Long story short....in my efforts to flash the 10B TOT file, the flash tool got to 94% and started the phone reboot step, but the phone never rebooted thus the flash was a failure. When I tried to re-do the steps to flash the 10B TOT, I found out that I was no longer able to get into download mode. In my computer's device settings, when the phone is connected with a USB it now shows up as Qualcomm HS-USBQloader 9008. I looked up the threads about this problem and started the process of getting this fixed using the BoardDiag tool, but that process fails at the part where I attempt to run the AP and EMMC tests (gives me a message saying "Device was not found in DLOAD trying to install flasher). I have not found any practical fix for this error.
Am I completely screwed now, or is there a step somewhere I'm missing? I've been at this for 5 hours.
ChiefIlliniwek5 said:
Long story short....in my efforts to flash the 10B TOT file, the flash tool got to 94% and started the phone reboot step, but the phone never rebooted thus the flash was a failure. When I tried to re-do the steps to flash the 10B TOT, I found out that I was no longer able to get into download mode. In my computer's device settings, when the phone is connected with a USB it now shows up as Qualcomm HS-USBQloader 9008. I looked up the threads about this problem and started the process of getting this fixed using the BoardDiag tool, but that process fails at the part where I attempt to run the AP and EMMC tests (gives me a message saying "Device was not found in DLOAD trying to install flasher). I have not found any practical fix for this error.
Am I completely screwed now, or is there a step somewhere I'm missing? I've been at this for 5 hours.
Click to expand...
Click to collapse
Have you installed the correct drivers for the Qualcomm HS-USBQloader for your version of windows?
Look at this guide it works perfectly. http://forum.xda-developers.com/verizon-lg-g3/general/how-to-hardbrick-guide-using-test-t3276928
netookska05 said:
Have you installed the correct drivers for the Qualcomm HS-USBQloader for your version of windows?
Look at this guide it works perfectly. http://forum.xda-developers.com/verizon-lg-g3/general/how-to-hardbrick-guide-using-test-t3276928
Click to expand...
Click to collapse
Just to make sure I was doing everything right, I installed the Qualcomm drivers with the test mode on for driver signing. My phone, when plugged into the computer, still shows up as Qualcomm HS-USB QDLoader 9008. So it's my understanding that I don't need to do the steps which detail how I would need to break into my phone and use wires and solder. Based on everything I've read, I should be able to use the BoardDiag tool, but it keeps telling me in one fashion or another that it can't connect to the phone. Sometimes it will tell me "Check PMIC first and if still boot problem, replace AP", other times it will give me the same message I was getting originally saying "Device was not found in DLOAD trying to flash programmer".
ChiefIlliniwek5 said:
Just to make sure I was doing everything right, I installed the Qualcomm drivers with the test mode on for driver signing. My phone, when plugged into the computer, still shows up as Qualcomm HS-USB QDLoader 9008. So it's my understanding that I don't need to do the steps which detail how I would need to break into my phone and use wires and solder. Based on everything I've read, I should be able to use the BoardDiag tool, but it keeps telling me in one fashion or another that it can't connect to the phone. Sometimes it will tell me "Check PMIC first and if still boot problem, replace AP", other times it will give me the same message I was getting originally saying "Device was not found in DLOAD trying to flash programmer".
Click to expand...
Click to collapse
Have you tried to boot into DL mode remove battery reinsert battery and press vol up while connecting to computer. If you are able to get into that mode you can downgrade to the vs98510b.tot. Can you post a computer screen shot of your setup of your Boarddiag?
netookska05 said:
Have you tried to boot into DL mode remove battery reinsert battery and press vol up while connecting to computer. If you are able to get into that mode you can downgrade to the vs98510b.tot. Can you post a computer screen shot of your setup of your Boarddiag?
Click to expand...
Click to collapse
It won't let me boot into download mode.
I've attached a screenshot of what my BoardDiag screen looks like. I extracted the TOT files that the tool created to my bare C: drive because any time I tried to change the directory for the location of those files it would cause the program to crash.
ChiefIlliniwek5 said:
It won't let me boot into download mode.
I've attached a screenshot of what my BoardDiag screen looks like. I extracted the TOT files that the tool created to my bare C: drive because any time I tried to change the directory for the location of those files it would cause the program to crash.
Click to expand...
Click to collapse
Ok so when you plug in your phone to the computer does it say installing the qualcomm driver or does it just show up as the qualcomm in device manager. I had that when I bricked my phone and had to redo the wire trick. Once I did it the installing qualcomm drivers notice came up and I was able to run the boarddiag with not problem. If all else fails give the wire trick a try. Here's another similar guide that will help too. I turned off driver signing on computer bootup just for reference. http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
netookska05 said:
Ok so when you plug in your phone to the computer does it say installing the qualcomm driver or does it just show up as the qualcomm in device manager. I had that when I bricked my phone and had to redo the wire trick. Once I did it the installing qualcomm drivers notice came up and I was able to run the boarddiag with not problem. If all else fails give the wire trick a try. Here's another similar guide that will help too. I turned off driver signing on computer bootup just for reference. http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
The first time I plugged it in after installing the Qualcomm drivers the window popped up to show that the device drivers were being installed and it completed successfully.
I'm trying to reach out to tungkick since I've seen in other threads that he has helped people who have run into the same issues I'm having. I'm hoping he can fix it without me having to crack open my phone.
ChiefIlliniwek5 said:
The first time I plugged it in after installing the Qualcomm drivers the window popped up to show that the device drivers were being installed and it completed successfully.
I'm trying to reach out to tungkick since I've seen in other threads that he has helped people who have run into the same issues I'm having. I'm hoping he can fix it without me having to crack open my phone.
Click to expand...
Click to collapse
Does your comm port in qualcomm driver in device settings and boarddiag comm port match?
Also, were you already rooted and wanted to go back to stock or what version of software were you downgrading from ( ex. 46A,47A what).
netookska05 said:
Does your comm port in qualcomm driver in device settings and boarddiag comm port match?
Click to expand...
Click to collapse
Yes it does. As far as I can tell I'm doing everything right based on the tutorials that are out there.
ChiefIlliniwek5 said:
Yes it does. As far as I can tell I'm doing everything right based on the tutorials that are out there.
Click to expand...
Click to collapse
What software are you coming from? That was the second part of my response. Take a look at this if you haven't already. http://forum.xda-developers.com/lg-...lcomm-9008-t3072091/post59881075#post59881075
netookska05 said:
What software are you coming from? That was the second part of my response. Take a look at this if you haven't already. http://forum.xda-developers.com/lg-...lcomm-9008-t3072091/post59881075#post59881075
Click to expand...
Click to collapse
So the long story is that I was originally running 47A stock with root and TWRP recovery. I was having TERRIBLE battery life and it got to the point where I couldn't take it any more so I decided to flash a CM13 nightly. I was going to test the waters to see if I could use a systemless SuperSU version with CM13 so when I flashed CM13 I also flashed SuperSU 2.68 at the same time. It turns out that's a big no-no. So when I tried to reboot, I got the error message that the secure boot failed, or something to that effect. So after looking at posts on XDA I intended on doing the "revert to 10B from 47A" method with a TOT file and the flash tool. Everything with that was working great...it got to 94% complete and got the point in the process where the phone reboots, but when the phone left download mode it never came back and the flash tool never made a re-connection with the phone to complete the end of the process. From that point on, I could not even load into download mode, thus here I am.
netookska05 said:
What software are you coming from? That was the second part of my response. Take a look at this if you haven't already. http://forum.xda-developers.com/lg-...lcomm-9008-t3072091/post59881075#post59881075
Click to expand...
Click to collapse
Ok so I used the androidbrick tool in that link you sent me and the process seems to have gone through correctly. After re-installing my battery the phone booted to the LG screen, then showed the little android guy with a progress bar, but that screen didn''t last long before the phone rebooted again and this time after the LG screen I got a screen that said "miniOS" and following that came a blue screen with the words "Factory Reset Status" and a big red number 2. So that's where I'm at now and I'm going to look up info on that to see what I do next. If you have any experience with this step please let me know.
Boot into download mode Volume up and us lg flash tool and tot again. It should say 3 when successful.
netookska05 said:
Boot into download mode Volume up and us lg flash tool and tot again. It should say 3 when successful.
Click to expand...
Click to collapse
Ok, this is where I was earlier today and when it got to about 94% complete and commanded the phone to reboot, the phone never came back to a state that allowed the flash tool to complete. I've seen some sites talk about having to hold the up volume button at a certain juncture around the time that it failed for me last time. Is there some trick to this?
netookska05 said:
Boot into download mode Volume up and us lg flash tool and tot again. It should say 3 when successful.
Click to expand...
Click to collapse
It did it again! Phone got to 100% on the flash and the tool got to the restart command, but the phone never came back on after leaving the download mode from the reboot command. I even was holding the volume up like another website said when the reboot occurred. I also changed the setting from "Upload DL" to "Board DL" as suggested by others in various threads. The error I'm getting after the tool says it failed is "USB port open FAIL!"
ChiefIlliniwek5 said:
It did it again! Phone got to 100% on the flash and the tool got to the restart command, but the phone never came back on after leaving the download mode from the reboot command. I even was holding the volume up like another website said when the reboot occurred. I also changed the setting from "Upload DL" to "Board DL" as suggested by others in various threads. The error I'm getting after the tool says it failed is "USB port open FAIL!"
Click to expand...
Click to collapse
Ok, we are back up and running! I went through all the steps again going all the way back to the androidbrick tool. This time when the phone boot into miniOS mode and was still on that animation, I hit the power button (something I saw on another post) and it took me to the AAT screen. I had seen a thread about this somewhere and followed those steps to have the phone reboot into the setup wizard and we are all good now! WHEW! The only thing that sucks is throughout this whole process I've lost well over 100 photos of my son . Oh well....I saved myself a few hundred bucks. Thanks for all of your help!!
ChiefIlliniwek5 said:
Ok, we are back up and running! I went through all the steps again going all the way back to the androidbrick tool. This time when the phone boot into miniOS mode and was still on that animation, I hit the power button (something I saw on another post) and it took me to the AAT screen. I had seen a thread about this somewhere and followed those steps to have the phone reboot into the setup wizard and we are all good now! WHEW! The only thing that sucks is throughout this whole process I've lost well over 100 photos of my son . Oh well....I saved myself a few hundred bucks. Thanks for all of your help!!
Click to expand...
Click to collapse
You sure did save and no problem glad to help. Always store photos on ext sd. Enjoy
netookska05 said:
You sure did save and no problem glad to help. Always store photos on ext sd. Enjoy
Click to expand...
Click to collapse
ChiefIlliniwek5 said:
Ok, we are back up and running! I went through all the steps again going all the way back to the androidbrick tool. This time when the phone boot into miniOS mode and was still on that animation, I hit the power button (something I saw on another post) and it took me to the AAT screen. I had seen a thread about this somewhere and followed those steps to have the phone reboot into the setup wizard and we are all good now! WHEW! The only thing that sucks is throughout this whole process I've lost well over 100 photos of my son . Oh well....I saved myself a few hundred bucks. Thanks for all of your help!!
Click to expand...
Click to collapse
I also wanted to add, I use the Mega cloud service app with 50 GB free. I have it configured to automatically back up my pictures and videos whenever I'm connected to WiFi. I save photos and videos to internal storage because it's faster and more reliable than Micro SD cards are.
roirraW "edor" ehT said:
I also wanted to add, I use the Mega cloud service app with 50 GB free. I have it configured to automatically back up my pictures and videos whenever I'm connected to WiFi. I save photos and videos to internal storage because it's faster and more reliable than Micro SD cards are.
Click to expand...
Click to collapse
@roirraW "edor" ehT Good idea I may just do that myself.
Hi, I have one which was on Display, and is running in Full Retail mode. I have contacted JBL about doing a factory reset, but they said they come from the factory like that. I have opened it up, and it looks like a full working unit, and the board is labelled 40-SPARRO-MAD4G.
I tried holding either volume button down when starting, and when holding the right volume button down, the green android appeared with an error symbol.
Their is a Micro-USB port underneath marked service, but I have so far not been able to track any firmware updates/roms/images etc? I plugged it into a PC, and it said the driver was a
qualcomm HS-usb android diag 901d
I figure if I can't use it as a smart display, they'll make a great set of speakers.
Did you figure out how to use this in any way? I have a similar issue.
sudds65 said:
Did you figure out how to use this in any way? I have a similar issue.
Click to expand...
Click to collapse
Not at all sorry. I was looking at trying to install Google Assistant on there, from scratch but it's beyond my expertise. I tried looking for a rom/firmware update, but nothing. If I had access to working one, I might be able to back up the rom onto a PC via the Micro-USB port.
Darn, alright. I ended up selling the thing. Got one from an auction, oh well, I will just buy a Nest Max
Hi. I have a same issue. It on Demo mode and I tried to factory reset but no hope. Does anyone have solution to change or flash Rom on this. Thanks
Fixed
I know how to fix this. But this requires firmware from the desktop. Need to make a backup from the desktop and download to the demo version.
And i know how to go into mode to download the firmware but i don't have it and i can't find it anywhere.
andrukarc said:
I know how to fix this. But this requires firmware from the desktop. Need to make a backup from the desktop and download to the demo version.
And i know how to go into mode to download the firmware but i don't have it and i can't find it anywhere.
Click to expand...
Click to collapse
Well can you share what you have found? I too have a demo model of this display I would love to get working. If what you propose seems viable I'm willing to buy a retail model with the aim of pulling off the rom and returning it to the store later.
Nousernamesleft said:
Well can you share what you have found? I too have a demo model of this display I would love to get working. If what you propose seems viable I'm willing to buy a retail model with the aim of pulling off the rom and returning it to the store later.
Click to expand...
Click to collapse
Hello Friend. We just need to get the recovery from the working device. And download the demo model. I'm sure 95% that it will work. Sent me a private message.
Can you tell me how to use it?
Nousernamesleft said:
Well can you share what you have found? I too have a demo model of this display I would love to get working. If what you propose seems viable I'm willing to buy a retail model with the aim of pulling off the rom and returning it to the store later.
Click to expand...
Click to collapse
I have the same product and problem.
If you solved, can you tell me how?
Just ordered one of these speakers. I will have a Brand new boxed set in about day or 2. Tell me how I can pull the rom off so I can share it on this thread.
navman27 said:
Just ordered one of these speakers. I will have a Brand new boxed set in about day or 2. Tell me how I can pull the rom off so I can share it on this thread.
Click to expand...
Click to collapse
This is the information I was sent via PM from andrukarc . No idea if it is correct or not.
here is a link on how to extract a backup
https://forum.xda-developers.com/gen...-root-t3570178
I can't do it because there is no place to buy in my country. JBL link View they are not supported in Ukraine and so they are not imported here, but I have a demo model and I would also like to revive it.
If so backup then we flash the device and it will become like a regular model.
I know how to go into firmware mode and solder for this program.
.
you made a backup?
anymore movement on this im curious how things are panning out
Nousernamesleft said:
This is the information I was sent via PM from andrukarc . No idea if it is correct or not.
here is a link on how to extract a backup
https://forum.xda-developers.com/gen...-root-t3570178
Click to expand...
Click to collapse
Hi, the link didn't work, however there was this one : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178
Still, no update on a clean firmware, that is not a retail version?
Any updates on this pretty please?
Darug2300 said:
Hi, the link didn't work, however there was this one : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178
Still, no update on a clean firmware, that is not a retail version?
Click to expand...
Click to collapse
Hi, I have 2 devices JBL Link View - 1 working and 1 in demo mode. I tried to get dump from working device (I used metod from : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178), but whithout result. Both devices are detected in the computer as HS-USB QDLoader 9008 (volume buttons + \ - when turned on). But in eMMC Software there is always error 0x80004005 when I try to switch device to download mode. If someone helps me solve this problem, I will receive the firmware and post it here.
Irek66 said:
Hi, I have 2 devices JBL Link View - 1 working and 1 in demo mode. I tried to get dump from working device (I used metod from : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178), but whithout result. Both devices are detected in the computer as HS-USB QDLoader 9008 (volume buttons + \ - when turned on). But in eMMC Software there is always error 0x80004005 when I try to switch device to download mode. If someone helps me solve this problem, I will receive the firmware and post it here.
Click to expand...
Click to collapse
I tried win7 and win10. No results.
Looking to help if I can, as I got this on an auction I didn't fully read. My brother does have a full retail version thou.
Today I accidentally erased the system partition via Fastboot. And now it doesn't show the demo clip. This means I need to load the system.img into it . But how to pull this partition from the working device - I don't know yet. I keep looking for a method. I think JBL use Snapdragon 625 APQ8053 and Android Things OS. If I could get developer mode I would use ADB to download system.img from working device
Thx for all your efforts so far!
Man, im pulling my hair out trying to get this box working again.
Short brief: I bricked it lol. But Ive got it to connect to the PC again via the shorting it out trick.
I've flashed a couple of different iso's to no success.
Which I mean, it completed 100%, but once disconnected, it wouldn't boot up.
I just cannot find the specific one for my MXQ Pro.
As I said, the specs are
S905X
6.0.1 Marshmallow
H234_V2.2
2017-04-08 is whats written on the mother board.
I'm trying to flash it using USB_Burning_Tool 2.0.7.2
Ive probably wasted 100gig in downloads so far trying to find firmware thats compatible. I'm just about ready to throw it in the bin.
As a last ditch effort, does anyone know where I can find compatible firmware for this thing?
cheers
Xdegenerate said:
Man, im pulling my hair out trying to get this box working again.
Short brief: I bricked it lol. But Ive got it to connect to the PC again via the shorting it out trick.
I've flashed a couple of different iso's to no success.
Which I mean, it completed 100%, but once disconnected, it wouldn't boot up.
I just cannot find the specific one for my MXQ Pro.
As I said, the specs are
S905X
6.0.1 Marshmallow
H234_V2.2
2017-04-08 is whats written on the mother board.
I'm trying to flash it using USB_Burning_Tool 2.0.7.2
Ive probably wasted 100gig in downloads so far trying to find firmware thats compatible. I'm just about ready to throw it in the bin.
As a last ditch effort, does anyone know where I can find compatible firmware for this thing?
Click to expand...
Click to collapse
try this android 6.1 https://mega.nz/#!OpAATBTY!CY_KUix-gKUaAxecY8pREqu8Wi9WvkbSJNXhInKDzMQ
and this android 7.1 https://mega.nz/#!q4Y0xKbJ!W1-HBCiRGBgq_tW6AFzsbOUweRRs7ov8Cg6h92ILQi8
frake50 said:
try this android 6.1 https://mega.nz/#!OpAATBTY!CY_KUix-gKUaAxecY8pREqu8Wi9WvkbSJNXhInKDzMQ
and this android 7.1 https://mega.nz/#!q4Y0xKbJ!W1-HBCiRGBgq_tW6AFzsbOUweRRs7ov8Cg6h92ILQi8
Click to expand...
Click to collapse
Thanks, but no success.
Usb Control setup errors
Xdegenerate said:
Thanks, but no success.
Usb Control setup errors
Click to expand...
Click to collapse
in this case you need to open the cover again and write down which manufacture you have of thechip -- samsung or Ky hynix i think in your case maybe HX
you can try
https://drive.google.com/drive/folders/1eg_hjvzCzs0H2bGk_oEfuLKvynjlh-3u 7.1
frake50 said:
in this case you need to open the cover again and write down which manufacture you have of thechip -- samsung or Ky hynix i think in your case maybe HX
you can try
https://drive.google.com/drive/folders/1eg_hjvzCzs0H2bGk_oEfuLKvynjlh-3u 7.1
Click to expand...
Click to collapse
Which part am I looking at to figure out which one it is?
https://imgur.com/a/TTNyuV1
Edit: Oh, i think i see it.
SK hynix!
Xdegenerate said:
Which part am I looking at to figure out which one it is?
https://imgur.com/a/TTNyuV1
Edit: Oh, i think i see it.
SK hynix!
Click to expand...
Click to collapse
exactly yours NAND SK hynix manufacture ... only firmware with box had this nand will work.. if you flash firmware from Samsung box it will freeze at boot as you wrote at yours first post.
the pervious post i added link at google drv are Hynix Nand firmware.. you can also try and search after Docooler 4K box as they are Hynix too.... 4pda.ru had section with many firmware..
version from Docooler android 7.1 V1880-16G V2322 7.1 passed on your box
check here too
https://forum.xda-developers.com/an...ters/amlogic/docooler-m9s-pro-t3450711/page26
good luck
frake50 said:
exactly yours NAND SK hynix manufacture ... only firmware with box had this nand will work.. if you flash firmware from Samsung box it will freeze at boot as you wrote at yours first post.
the pervious post i added link at google drv are Hynix Nand firmware.. you can also try and search after Docooler 4K box as they are Hynix too.... 4pda.ru had section with many firmware..
version from Docooler android 7.1 V1880-16G V2322 7.1 passed on your box
check here too
https://forum.xda-developers.com/an...ters/amlogic/docooler-m9s-pro-t3450711/page26
good luck
Click to expand...
Click to collapse
well, the first link worked. It's booted up. Only problem is, the remote doesnt respond, it only allows me to push down. I installed the next one successfully too, but same problem. The remote only allows a down navigation. Pressing anything else won't work.
Keyboard and mouse respond just fine.
I've tried changing the remote files, even tried the Beelink one, but none of them are working.
I've tried two remotes, both doo the same thing.
The firmware is rooted.
One thing I'm seeing is a notification saying the SU binary needs updating. However the link I downloaded it from says not to, as it will cause a boot loop.
I'm wondering if perhaps when I opened the box and shorted it to read to usb burner, if maybe I damaged the reciever or something? However, when pressing buttons on the remote, pressing up does change the blue light to red on the box, so it is recieving something, just not doing what it should.
But pressing left or right does not change the light.
Edit. I've just discovered pressing up is actually being used as the return key, it backs out of apps.
None of the 4 files, or the Beelink file fix the issue.
Xdegenerate said:
well, the first link worked. It's booted up. Only problem is, the remote ..Edit. I've just discovered pressing up is actually being used as the return key, it backs out of apps.
None of the 4 files, or the Beelink file fix the issue.
Click to expand...
Click to collapse
Try this remote.conf unzip it and replace it in system/etc don't forget change the permission to 0644
frake50 said:
Try this remote.conf unzip it and replace it in system/etc don't forget change the permission to 0644
Click to expand...
Click to collapse
How do I change the permission?
Xdegenerate said:
How do I change the permission?
Click to expand...
Click to collapse
use attached RootExplorer
after you replace the file in place just remark it with long press with mouse.. then go to the top righ of the program and choice permission in windows open you can just right 0644 then hit OK
frake50 said:
use attached RootExplorer
after you replace the file in place just remark it with long press with mouse.. then go to the top righ of the program and choice permission in windows open you can just right 0644 then hit OK
Click to expand...
Click to collapse
No success
Remotes still acting the same way.
Well, in one way I've resolved this, but without resolving the problem.
I can't fix the blue tooth standard remote problem. I think i may have screwed something up when I was short circuiting the mother board.
However, purchasing an android remote that uses a usb reciever does the trick. I bought one of thoseveral android keyboard remotes. It works perfectly fine, only issue is I can't power on and off with the remote. I have to pull the power out or switch it off and on by the wall.
However there is another remote with a power button, I presume it would be able to power on and off. I'll mention this incase in future anyone has this issue.
Xdegenerate said:
well, the first link worked. It's booted up. Only problem is, the remote doesnt respond, it only allows me to push down. I installed the next one successfully too, but same problem. The remote only allows a down navigation. Pressing anything else won't work.
Keyboard and mouse respond just fine.
I've tried changing the remote files, even tried the Beelink one, but none of them are working.
I've tried two remotes, both doo the same thing.
The firmware is rooted.
One thing I'm seeing is a notification saying the SU binary needs updating. However the link I downloaded it from says not to, as it will cause a boot loop.
I'm wondering if perhaps when I opened the box and shorted it to read to usb burner, if maybe I damaged the reciever or something? However, when pressing buttons on the remote, pressing up does change the blue light to red on the box, so it is recieving something, just not doing what it should.
But pressing left or right does not change the light.
Edit. I've just discovered pressing up is actually being used as the return key, it backs out of apps.
None of the 4 files, or the Beelink file fix the issue.
Click to expand...
Click to collapse
What file did you use to get your box working again? I believe I am in the same boat as you on this and could use a life raft. Trying alternate imgs for other boxes is where I am at, as all images I find for this box (aside from one labeled red and black) will not copy to the box and get stuck at 7%.
If you have any pointers at all I would love to see some life back in this box. All I wanted was to update to 7.1. Damn.....
dwoycheshen said:
What file did you use to get your box working again? I believe I am in the same boat as you on this and could use a life raft. Trying alternate imgs for other boxes is where I am at, as all images I find for this box (aside from one labeled red and black) will not copy to the box and get stuck at 7%.
If you have any pointers at all I would love to see some life back in this box. All I wanted was to update to 7.1. Damn.....
Click to expand...
Click to collapse
Try my customised ROM, I have this installed on my MXQ pro 4K (1gb RAM), runs well, has drivers for my strange clone wifi chip (ethernet works better than the clone realtek wifi chip), Its minimal and de bloated and i have a new version coming probably tomorrow wich looks better, removed the purple ect... let me know how you get on, some advice oce through initial set up, go to settings, apps, and disable chromecast, then reboot, or it will fill your internal storage & my remote dont work, i use a usb wireless and also use the tv remote through CEC
New Versoin 6 added with many improvments updated 12/05/2202
https://forum.xda-developers.com/android-stick--console-computers/amlogic/rom-android-tv-custom-rom-7-1-2-s905x-t4098131