Audio switch - please help - Xiaomi Poco F1 Questions & Answers

hello, New to Pocophone F1, ( had galaxy s7edge before)
I can't find the audio switch button anywhere.
for example - if I am watching youtube or listening to spotify, and i want to change audio from bluetooth speaker to phone speaker , I can't do it without disconnecting the bluetooth.
Am I missing something, thank you
Jobran

Related

Audio playing through speakers after Bluetooth disconnect

Samsung Galaxy s8, since I had the phone it's worked great playing audio through a Bluetooth headset and connected to Panasonic head unit with arunchained rootless. My problem is after the last update whenever I disconnect the headset or headunit instead of stopping the audio starts playing through the phone speakers. Is there a way to stop this?

radio fm does not work correctly

The sound is often interspersed.
Does it happen to someone else?
I have the same issue. Sometimes the FM stops working for 3 seconds. I contacted the support team, they don't know. Any help?
mee to have the same issue in dubai other phones work normally
I'm just testing mine now in Ireland and it seems to be working perfectly...did you try clearing cache and trying again? Does the app force stop or the audio just stops?
I have the same problem. Cut off in 3 seconds
I have the same problem. Any solution?
Does the fm radio even work in custom rom?
Not only Radio suffers - BUT ONLY when audio used in STEREO!
Not only FM Radio suffers but the NEUTRON player too. BUT these problems exists only when the audio used in STEREO mode. If you set audio to be MONO (System&Device --> Additional settings --> Accessibility --> AUDIO & ON-SCREEN-TEXT --> Mono audio) then the the radio will not silent periodically.
Please tell this to the developers!
(the Neutron player have the issues when plugging the headphones - it stops to play streamed audio and not play it after the player restarts only once, but start to play the streams after two restarts only)
sshrzgnr said:
Not only FM Radio suffers but the NEUTRON player too. BUT these problems exists only when the audio used in STEREO mode. If you set audio to be MONO (System&Device --> Additional settings --> Accessibility --> AUDIO & ON-SCREEN-TEXT --> Mono audio) then the the radio will not silent periodically.
Please tell this to the developers!
(the Neutron player have the issues when plugging the headphones - it stops to play streamed audio and not play it after the player restarts only once, but start to play the streams after two restarts only)
Click to expand...
Click to collapse
I have been trying to find the root cause behind it , thanks man
MetalTechGaming said:
I have been trying to find the root cause behind it , thanks man
Click to expand...
Click to collapse
Thank YOU!!!
The following are some additional facts related to the issue. THANK YOU!
( forum.xda-developers.com/poco-f1/review/speakerphone-loudness-clarity-t3832513/page2#post79393737 )
title: Audio in STEREO mode CAUSES serious issues (not only in FM Radio)
The FM Radio have issue which PREVENT the using the radio! :crying: The volume drops down up to be absolutely silent every ~10-12 seconds.
But not only the FM Radio suffers, the NEUTRON player too.
The problems exists only when the MIUI plays\operate with audio in STEREO mode. If you set audio to be MONO (System&Device --> Additional settings --> Accessibility --> AUDIO & ON-SCREEN-TEXT --> Mono audio) then the radio will not silent periodically.
Please tell this to the developers!
(The Neutron player have the issues when plugging the headphones - it stops to play streamed audio and not play it after the player restarts only once, but start to play the streams after two restarts only.
An addition issue when Neutron player used: when 3.5 plug disconnected, then the Pocophone plays short part of streamed audio after ~0.5 sec delay and then it can not be used without two restarts of the player.
The Neutron player work well when the MIUI converts (as this was described before) the audio to MONO)
NOTE:The issue with STEREO MODE AUDIO is manifesting on the genuine Pocophone Device which is managed by the LAST OFFICIAL GLOBAL MIUI ROM 10.2.3.0, as all this is stated on the following Screenshot:
drive.google.com/file/d/1x0aPebTBagBYgDBHw7kZUxkyQ4Lru-R3/view?usp=sharing

Bluetooth car audio - phone OK; playing music -> no sound

When hooking up my Poco F1 to my car audio (Toyota Yaris, 2012) via bluetooth, I can easily connect and make/receive phone calls.
When hooking it up to a bluetooth speaker, I can stream sound, e.g., from VLC player.
On LOS16 (20181219) and crDroid (20181219), when hooked up to my car via bluetooth, I can see which song is being streamed (song title shows up on car screen), but no sound.
I have no magisk modules activated at all. I do have magisk 18.0 installed for root purposes.
I have experimented with beryllium-V10.1.3.0-9.0-vendor-firmware and am now on 8.12.24-9.0. No sound with both.
I want to look into this in detail, but not sure what to experiment with.
I like a full-featured ROM like crDroid or AEX and I really need a ROM that is confirmed to work with encryption.
So, questions:
- any one else has similar problems?
- what should I be experimenting with? ROM version, vendor version, magisk modules, codec settings, ...?
- any known solutions?
EDIT: the same problem exists when connecting my Poco F1 to my desktop via bluetooth: no audio streaming sound from my desktop speakers. On my Axon 7, this is not a problem.
Thank you.

Bluetooth playback channels

Hello xda.. Does anyone know if it is possible to use a single phone to connect 2 Different Bluetooth devices? And play the music at the same time on both Bluetooth speakers? I have seen on YouTube in the Bluetooth settings there was a settings page where you can set dual audio.. Something like that and then you are able to listen your song trough 2 Different Bluetooth speaker..
I have xiaomi mi 8 lite, android 10 (latest global version) rooted Magisk + twrp+ dolby +
viper4android, Bluetooth version: 5.0
I can't find the option I specified.. I tried : accessibility settings, developer settings, bluethoot setting there is no settings there ( I can only connect / disconnect a device)
I can connect up to 5 Bluetooth speaker at the same time.. but only the one speaker will play music) is there any way to get sound trough the 2 Bluetooth speakers?...
Thanks..

Speaker and Bluetooth audio streaming issues

Hey guys , I can't stream audio through the Bluetooth. As soon as I connect the Bluetooth speaker ,the media controls show that the volume at 0%. And when I try to increase the volume it automatically Comes back at 0%. I'm using a poco F1(beryllium) flashed with pixel experience+. Also the phone speaker doesn't work at all.
No sound comes out even if I play notification sounds.
All was well before installing custom rom.
What to do?

Categories

Resources