Sorry for my English but... I bought today Nokia 7.1 with problem "stuck on download Mode" ok it stuck but... No recovery Mode no operating system... When i tried to flash firmware i stuck on REFLASH SERVICE Bootloader... nów what can i do. Some aolutions?
sebouss1990 said:
Sorry for my English but... I bought today Nokia 7.1 with problem "stuck on download Mode" ok it stuck but... No recovery Mode no operating system... When i tried to flash firmware i stuck on REFLASH SERVICE Bootloader... nów what can i do. Some aolutions?
Click to expand...
Click to collapse
Hi, there were multiple cases here, and I think everyone finally sent the phone in for repair (and received it back flashed and ok).
So, I'm not sure anyone knows how to solve this themselves yet.
Same problem here...
An security update brought me this issue. I tried to flash it with OST but it was unable to rewrite the bootloader (also in emergency mode). Then I used "fast boot" to unlock the bootloader. ERROR / Not allowed.
I also tried to update the firmware with "fast boot" but it didn't work as the bootloader is locked. I also changed the active partion by "fast boot". So I was able to reach the factory reset mode in my phone. I followed the menu and it did some reboots => still stuck in the "download mode". Any other ideas? Thx a lot
Related
Guys, I'm desperate.
Today my note 5 show this new update, 9.15.19, I just click to update. Something just went wrong and the phone stucked in Updating screen with the MI logo and the message to don not rebot the phone.
After that I can't do anything, if I restart the phone, it stucks back again in the same uptade screen. If I go to fastboot mode, I can't flash any ROM, I get the "Flash XBL Error" and I didn't unlock the bootloader.
Please, somebody have any idea that I can try???
ewertonveccheitti said:
Guys, I'm desperate.
Today my note 5 show this new update, 9.15.19, I just click to update. Something just went wrong and the phone stucked in Updating screen with the MI logo and the message to don not rebot the phone.
After that I can't do anything, if I restart the phone, it stucks back again in the same uptade screen. If I go to fastboot mode, I can't flash any ROM, I get the "Flash XBL Error" and I didn't unlock the bootloader.
Please, somebody have any idea that I can try???
Click to expand...
Click to collapse
You haven't mentioned that you did wipe data or not?
ewertonveccheitti said:
Guys, I'm desperate.
Today my note 5 show this new update, 9.15.19, I just click to update. Something just went wrong and the phone stucked in Updating screen with the MI logo and the message to don not rebot the phone.
After that I can't do anything, if I restart the phone, it stucks back again in the same uptade screen. If I go to fastboot mode, I can't flash any ROM, I get the "Flash XBL Error" and I didn't unlock the bootloader.
Please, somebody have any idea that I can try???
Click to expand...
Click to collapse
If u didn't unlock the bootloadee how can you fastboot flash
Damn, I've just deleted everything I wrote here...
Okay then, check you phone version on the back cover(search for MEG7 for global, MEE7, MET7 for china), download correct ROM(look for it on en.miui.com in your phone threads, or ask me later if you need link, I'll give you it from my browser history) and follow steps here
The best solution is to find right ROM version for your phone, download miflash and flash "fastboot rom".(If bootloader is locked it doesnt mean that you cant flash official miui rom for your phone).
And here's the link to flash
Via Recovery:
China_V9.6.2.0.NEGCNFD
Global_V9.5.11.0.NEGMIFA
Via Fastboot:
China_V9.6.2.0.NEGCNFD
Global_V9.5.11.0.NEGMIFA
Have a nice day.
Hello
I have a problem with my new phone :/. I bought honor 9 yesterday. Today I update it to C432B183 by HiSuite. Then phone found and installed C432B360 update by ota . Unfortunately Phone found update C432B368 by ota(? I'm note sure this number) and installation failed. I tried to download C432B360 by erecovery, but it failed too. What can I do? Is it normal to brick the phone by downloading update? Should I send it to warranty?
Thank you for your answers.
You can't boot anymore in normal mode ?
I can't. It show only honor logo, then system shut down and I'm in recovery.
As eRecovery does not help ;
Boot to Recovery and try one of these :
-wipe cache
-wipe data / factory reset
Hold down volumeUp when booting for enter in recovery mode.
I tried this too, but it didn't help. The strangest thing is that erecovery starts redownloading from 30%.
Bootloader unlocked ?
Thank you for help. The phone is working again. I don't know how, but I tried download rom through erecovery again and it start working. I don't have bootloader unlocked. But I learned it's very dangerous to update phone and I shouldn't do this again.
Good Morning,
Friday night I downloaded the new EMUI 9.1., the official version, and I installed it during the night.
I used my phone all the Saturday but it was extremly slow. I swiched off my phone several times but it never helped me.
At some point in the afternoon, the phone is reseted alone and I have not been able to use it anymore.
The phone only resets itself: it turns on, reaches the blue screen that says "Honor" and resets again. It can not be turned off.
I tried to do a HW reset (power off + volume up) but nothing happens: it reaches the blue screen and it resets again, and again and again...
The only interaction I can have is with the "Fastboot & Rescue mode" screen. Here I get the error: AP_S_Abnormal 64.
Phone Locked FRP lock.
And nothing more.
Would someone be so kind to help me or give me some recommendation/advice of what I can do?
Thank you
From where did you get EMUI 9.1?
I think he meant 9.0 and not 9.1
Soforid said:
Good Morning,
Friday night I downloaded the new EMUI 9.1., the official version, and I installed it during the night.
I used my phone all the Saturday but it was extremly slow. I swiched off my phone several times but it never helped me.
At some point in the afternoon, the phone is reseted alone and I have not been able to use it anymore.
The phone only resets itself: it turns on, reaches the blue screen that says "Honor" and resets again. It can not be turned off.
I tried to do a HW reset (power off + volume up) but nothing happens: it reaches the blue screen and it resets again, and again and again...
The only interaction I can have is with the "Fastboot & Rescue mode" screen. Here I get the error: AP_S_Abnormal 64.
Phone Locked FRP lock.
And nothing more.
Would someone be so kind to help me or give me some recommendation/advice of what I can do?
Thank you
Click to expand...
Click to collapse
So because :
- your device reboot itself to bootloader mode because 'AP_S_Abnormal 64'
- Phone is Locked FRP lock
- you don't manage to enter recovery mode to do a full wipe / factory restore
You could :
- download and use a dload package with an sd/card or an USB-OTG flashdrive in dload mode.
- or use Honor service center help
- or try again and again to boot right to recovery mode to format.
- or try erecovery restore via wifi in erecovery mode
- or try Hisuite Restore option
I think they all will restore your device to factory stock, meaning the actual user datas would be lost...
---------- Post added at 14:51 ---------- Previous post was at 14:45 ----------
Pro tips to enter recovery mode :
-USB must be unplugged (not plugged to computer)
-Hold VolumeUp key BEFORE device vibrate first at boot and keep holdind UNTIL you are in recovery mode
-Try again to reach 'recovery mode'
the pie update has been pulled because of the recovery error , have a google about it
The Mero said:
the pie update has been pulled because of the recovery error , have a google about it
Click to expand...
Click to collapse
Google heard nothing about that here...
oslo83 said:
Google heard nothing about that here...
Click to expand...
Click to collapse
https://uk.community.huawei.com/honor-phones-34/honor-9-stuck-on-erecovery-loop-after-emui-9-official-update-4340
https://uk.community.huawei.com/software-40/load-honor-screen-after-reboot-stf-l09-9-0-1-162-c432e2r1p5-4131
https://translate.google.co.uk/translate?hl=en&sl=it&u=https://www.optimagazine.com/2019/04/26/scelta-estrema-per-honor-9-aggiornamento-con-emui-9-e-stato-ritirato-per-i-suoi-problemi/1444771&prev=search
Google is your friend
I updated to 9 through hisuite because no OTA update was found . tried it and rolled back to 8 cause they removed image stabiliser fron video recording . I read somewhere else that the update was pulled cause so many were having issues , but i always do a hard reset after updating and had none of the issues described , guess i was lucky.
The Mero said:
https://uk.community.huawei.com/hon...covery-loop-after-emui-9-official-update-4340
Google is your friend
I updated to 9 through hisuite because no OTA update was found . tried it and rolled back to 8 cause they removed image stabiliser fron video recording . I read somewhere else that the update was pulled cause so many were having issues , but i always do a hard reset after updating and had non of the issues desribed .
Click to expand...
Click to collapse
If you say so.
So we should think B162 erecovery is not pushed anymore ?
oslo83 said:
If you say so.
So we should think B162 erecovery is not pushed anymore ?
Click to expand...
Click to collapse
Yeah it looks like it was a bit of a mess so just have to keep checking if they release an update for the update lol
Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
zolog said:
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
Click to expand...
Click to collapse
Hello. As far as I know, if you do not have OEM Unlocking enabled, you cannot flash anything through ODIN.
However, you should be able to flash stuff in the green screen you are in.
Download the *proper* stock firmware from sammobile.
By proper, I mean, if your tab has no sim then download for T820
and if it does Download for T825. Then download with the proper CSC code. (it is basically the region you bought the tab from. Look it up).
Download and flash with ODIN 3.14. You can flash stock roms from the Error screen you're in. Also be sure that you're flashing everything properly and have the proper drivers by following everything here: https://android.gadgethacks.com/how-to/use-odin-flash-samsung-galaxy-stock-firmware-0182037/
press the thanks button on the bottom right of my post if i helped. Means a lot