Hi i was hoping someone could help me fix my SM-G925F device. I will give you abit of information of how im in the situation going back to about a year ago i got a firmware update on my samsung galaxy s6 edge so i started downloading it and my device rebooted and said it was installing the update but halfway through it must of corrupted or failed but my device still booted up and when i went into my settings it said i was on android version 7.0 so thought nothing of it but did start having a few minor issues now and then but anyway on sunday i was playing a game on my phone and it randomly just froze so i waited 2 mins and then it seemed to be working again but then 5 mins later it did it again and i waited around 10 mins and it was still frozen so i had a look on google and it showed me a button combination you can do to restart your device if it does freeze but after it tried rebooting it would just sit on the s6 edge logo screen so i tired looking online again and it told me to go into recovery mode which i did and it showed a little error at the bottom left corner saying "dm-verity error" but i still tried clearing my cache partition but when i rebooted the phone it was still stuck on the s6 edge logo. I decided to reflash my device with a stock rom from sammobile but it failed at system.img and when i try booting my phone i get a error saying "An error has occured while updating the device software. Use the Emergency recovery function in the Smart PC software" so i tried flashing a custom recovery named "TWRP" but that also failed so now when i go into dowload mode by holding down the down volume + home + power buttons and press volume up to enter dowload mode in the top left corner it says:
ODIN MODE
PRODUCT NAME: SM-G925F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
Secure Dowload: Enabled
KNOX WARRANTY VOID: 1 (0x0200)
AP SWREV: B:6 K:2 S:2
I have tried different stock roms that match my device model but now odin fails on boot.img or just stays on initialization
An easy way is to just flash TWRP and flash a custom ROM they have may that are stock flavours with improvements. also, check for a dm-verity flash file for TWRP
It wont let me flash anything using odin anymore to flash a custom recovery. Odin recognizes my device but wont flash anything like the progress bar under dowloading... doesnt even show up anymore. The only thing i can think of is taking it to a samsung engineer facility but i bet they charge loads
iCrazyGaming said:
It wont let me flash anything using odin anymore to flash a custom recovery. Odin recognizes my device but wont flash anything like the progress bar under dowloading... doesnt even show up anymore. The only thing i can think of is taking it to a samsung engineer facility but i bet they charge loads
Click to expand...
Click to collapse
Well, your only option now is let it boot loop and run out of power give it a little charge and see if it will flash TWRP for your device, small chance your internal flash drive is fried or the critical portion of the flash drive is corrupted.
HisEvilness said:
An easy way is to just flash TWRP and flash a custom ROM they have may that are stock flavours with improvements. also, check for a dm-verity flash file for TWRP
Click to expand...
Click to collapse
HisEvilness said:
Well, your only option now is let it boot loop and run out of power give it a little charge and see if it will flash TWRP for your device, small chance your internal flash drive is fried or the critical portion of the flash drive is corrupted.
Click to expand...
Click to collapse
Thanks for the reply and i think the partitions are corrupt because before i tried installing twrp and went into the stock recovery i got a few errors such as failed to mount /efs and failed to mount /cache
iCrazyGaming said:
Thanks for the reply and I think the partitions are corrupt because before I tried installing twrp and went into the stock recovery I got a few errors such as failed to mount /efs and failed to mount /cache
Click to expand...
Click to collapse
In TWRP never reboot straight away you need to install some files.
Download Odin: https://odindownload.com/
Download TWRP, make sure to select the correct Samsung device: https://twrp.me/Devices/Samsung/
Download Magisk, https://******************/#How_to_Install_Magisk_Latest_Version_201_on_Android_Non-Rooted_Phones
Download RMM-State-Bypass, https://drive.google.com/file/d/1UvqcYUbVTFomAmKCVkMyfTWeuz1sEz8n/view
Download Disable_Dm_Verity_ForceEncrypt, https://zackptg5.com/android.php#disverfe
Download a custom ROM(H-ROM & Lineage work with TWRP)) but make sure it is for your specific Samsung Galaxy device, https://forum.xda-developers.com/
It literally doesn't let me flash anything anymore odin loads the tar file then when i press start it sets up the connection and the just stays on instilization and i have left it for over 2 hours before and it was still on that same bit.
iCrazyGaming said:
It literally doesn't let me flash anything anymore odin loads the tar file then when i press start it sets up the connection and the just stays on instilization and i have left it for over 2 hours before and it was still on that same bit.
Click to expand...
Click to collapse
Does it say "added" as in the image below when connecting your S6?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HisEvilness said:
Does it say "added" as in the image below when connecting your S6?
Click to expand...
Click to collapse
Yeah it connects fine and i have tried different ports and usb cables but then just stays on the instilization step
It stopped letting me flash anything since i tried flashing twrp and it failed and it says i have a custom binary
iCrazyGaming said:
Yeah it connects fine and i have tried different ports and usb cables but then just stays on the instilization step
Click to expand...
Click to collapse
Well, there is hope since custom binary is not a big problem. K check out the options menu tick F.Reset Time and Re-partition and UNTICK Auto Reboot
Load TWRP but make sure it is the TWRP version for your S6.
Click start should do something like this. Should take about a minute. if that does not work drain the battery and do the named steps again if that fails I can not think of another way.
HisEvilness said:
Well, there is hope since custom binary is not a big problem. K check out the options menu tick F.Reset Time and Re-partition and UNTICK Auto Reboot
Load TWRP but make sure it is the TWRP version for your S6.
Click start should do something like this. Should take about a minute. if that does not work drain the battery and do the named steps again if that fails I can not think of another way.
Click to expand...
Click to collapse
i already have f.reset checked but does re partition delete all your data?
iCrazyGaming said:
i already have f.reset checked but does re partition delete all your data?
Click to expand...
Click to collapse
Yeh it wipes the flash drive of the current OS, then head into TWRP mode and flash a custom ROM from the S6 XDA sub, plenty of excellent ROM's make sure it can be flashed through TWRP those are easy.
HisEvilness said:
Yeh it wipes the flash drive of the current OS, then head into TWRP mode and flash a custom ROM from the S6 XDA sub, plenty of excellent ROM's make sure it can be flashed through TWRP those are easy.
Click to expand...
Click to collapse
My phone has alot of important data on it that i need that's why i didnt just try and factory reset when i first started problems. I will see how much samsung charge to fix it but if its too much illtry what you have previously said. Thanks for your time
iCrazyGaming said:
My phone has alot of important data on it that i need that's why i didnt just try and factory reset when i first started problems. I will see how much samsung charge to fix it but if its too much illtry what you have previously said. Thanks for your time
Click to expand...
Click to collapse
NP if that fails you can still do the wipe and then if you used your google account there should be a backup of your data stored. should be here: https://drive.google.com/drive/backups
HisEvilness said:
NP if that fails you can still do the wipe and then if you used your google account there should be a backup of your data stored. should be here: https://drive.google.com/drive/backups
Click to expand...
Click to collapse
Just found out my phone no longer charges but i can still get into download mode when i plug my phone into my pc. Here is the odin problem i keep having:
https://cdn1.imggmi.com/uploads/2019/12/12/6035edaa31681007f1eb731cec10c755-full.jpg
iCrazyGaming said:
Just found out my phone no longer charges but i can still get into download mode when i plug my phone into my pc. Here is the odin problem i keep having:
Click to expand...
Click to collapse
Image is too small for me to read it.
HisEvilness said:
Image is too small for me to read it.
Click to expand...
Click to collapse
Check the link above
iCrazyGaming said:
Check the link above
Click to expand...
Click to collapse
Stuck on init last time I had that I drained my phone, then put it back into download mode while it being connected to one of my PC's. Charging part is just the phone not registering it software-wise.
Related
Okay okay.. hello. I'm a new girl at XDA and thus new to all this rooting stuff.
First and foremost, I'm on Android 2.3.6. I used the XWLA4 insecure kernel to flash my SGS2 (since my official Samsung kernel is indeed XWLA4) and used S2Root to install BusyBox and superuser, but I had no CWM recovery so I manually installed CWM 4.0.0.2 via Odin.
It worked like a charm Now came the time to flash a custom firmware. I was thinking of MIUI, CM7 (because I didn't like stock ICS that much) and this new Fatal1ty Extreme ROM. In fact, I liked said ROM so much that I wanted to have it on my phone + the Red theme. And that's where the annoyance began..
I've carefully read all the instructions, but I didn't understand one:
"Copy the ROM to the Root dir of your SD card."
I thought it was just some directory in my USB storage, so I connected my device to my computer and connected the USB storage, yet I didn't find any folder named "Root" or anything that resembled a root directory.
After 1 hour of googling and extensive research, I was so annoyed that I just dragged the ROM + Theme to my USB storage.
I boot into CWM recovery, did a wipe (data/factory reset, dalvik cache wipe etc.) and then installed the ROM. When I rebooted, THIS happened:
I was stuck at the first screen, the one that said "Samsung Galaxy SII" on it with the yellow triangle!
And this screen did not go away until I boot my phone into download mode and flashed the official XWLA4 kernel from Samsung, aka unroot my phone.
After Unroot, my phone worked like normal. No bootloops, no being stuck on the first screen etc.
Can someone please shed light on this? Touchwiz isn't exactly my cup of tea anymore and I really would like to give my phone a custom look ._.
Thanks in advance
EDIT: It seems that this problem seems big, as every ROM that I flash (with wipes) takes <5 seconds to finish, and that usually means that it's a bad flash ._.
Can someone tell me how to solve this?
I've carefully read all the instructions, but I didn't understand one:
"Copy the ROM to the Root dir of your SD card
Root = copy the rom to the sd card not inside any folder .
DO NOT put anything in usb storage it is not the instructions for anything SD CARD only internal not the external one .
Connect phone to pc in usb mass storage mode copy the rom to the phones internal sd card only .
follow with CWM and root phone via Odin
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Then boot to recovery and install the rom .
That is an excellent choice of rom by the way .
jje
JJEgan said:
I've carefully read all the instructions, but I didn't understand one:
"Copy the ROM to the Root dir of your SD card
Root = copy the rom to the sd card not inside any folder .
DO NOT put anything in usb storage it is not the instructions for anything SD CARD only internal not the external one .
Connect phone to pc in usb mass storage mode copy the rom to the phones internal sd card only .
follow with CWM and root phone via Odin
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Then boot to recovery and install the rom .
That is an excellent choice of rom by the way .
jje
Click to expand...
Click to collapse
Well, I didn't put it in any folder and certainly not in the folder that says "usbStorage" on it. Please excuse me for my aloofness in this matter as I still don't quite understand how to access my internal SD card.
I have USB-debugging enabled and when I connect to my storage, I have something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, which one of these is the internal SD card? ._.
How i just reinstalled fatality rom .
Pick CWM and Root LA4
Flash via Odin
Download rom
Phone setting activate USB mass storage and copy the rom to the phone .
Boot to recovery mode vol up + home + Pwr release at first splash screen
Install/choose zip from sd card select fatality confirm yes
Installs reboot wait for rom to initialize then set it up .
jje
JJEgan said:
How i just reinstalled fatality rom .
Pick CWM and Root LA4
Flash via Odin
Download rom
Phone setting activate USB mass storage and copy the rom to the phone .
Boot to recovery mode vol up + home + Pwr release at first splash screen
Install/choose zip from sd card select fatality confirm yes
Installs reboot wait for rom to initialize then set it up .
jje
Click to expand...
Click to collapse
Doesn't work Tried that, but still doesn't go past the first screen..
EDIT: Maybe I should just flash it and then wait for it to boot.. I read similar situations where people flashed ROMs and they too were stuck on a boot screen, but in reality it really took so long due to the caches being rebuilt ._.
I'll try that. If anyone has suggestions, post in here
Azure Flame Kite said:
Doesn't work Tried that, but still doesn't go past the first screen..
EDIT: Maybe I should just flash it and then wait for it to boot.. I read similar situations where people flashed ROMs and they too were stuck on a boot screen, but in reality it really took so long due to the caches being rebuilt ._.
I'll try that. If anyone has suggestions, post in here
Click to expand...
Click to collapse
could you tell me where are you now? on which firmware? roooted/ or stock...
and which rom are you willing to flash?
zaheedahmed said:
could you tell me where are you now? on which firmware? roooted/ or stock...
and which rom are you willing to flash?
Click to expand...
Click to collapse
Unrooted again.
I want to flash Fatal1ty Extreme with the Fatal1ty Red Theme package ._.
I'm on the stock XXKI4 firmware with the XWLA4 kernel ._.
When I root my phone with CF-Root-SGS2_XW_OXA_LA4-v5.0-CWM5 kernel from Chainfire, the root is fine but when I flash Fatal1ty via CWM, it says "installation complete" but I can't get past the first screen ._.
When I root my device with the XWLA4 insecure kernel and then root it with S2Root, still nothing.
I even tried flashing Redpill 1.3 (auto-root) and then flash Fatal1ty, still nothing..
I'm always stuck at the first screen ._.
Full wipe. Aka wipe data and cache from recovery then install ROM.
Envoyé depuis mon GT-I9100 avec Tapatalk
Paradoxxx said:
Full wipe. Aka wipe data and cache from recovery then install ROM.
Envoyé depuis mon GT-I9100 avec Tapatalk
Click to expand...
Click to collapse
According to her first post, she already did that.
I boot into CWM recovery, did a wipe (data/factory reset, dalvik cache wipe etc.) and then installed the ROM. When I rebooted, THIS happened:
Click to expand...
Click to collapse
Fatality_Extreme(2). Rename that file. Delete the (2). Same for the theme zip.
5kops said:
Fatality_Extreme(2). Rename that file. Delete the (2). Same for the theme zip.
Click to expand...
Click to collapse
Will do, but what exactly would renaming it accomplish? ._.
Looking at the pic you posted you've downloaded the rom and theme twice (?). It will prevent a sucessful flash. Experience.
5kops said:
Looking at the pic you posted you've downloaded the rom and theme twice (?). It will prevent a sucessful flash. Experience.
Click to expand...
Click to collapse
Yeah, I downloaded them twice ._. But they are only once in my phone's storage.
Agree numbered zip makes no difference if it ends as .zipYou can even rename the zip.
jje
Sent from my GT-I9100 using xda premium
The flash after full wipe is always successfull, but it doesn't boot. Even if I wait 10-15 minutes -_-
Does it work with any other rom?
5kops said:
Does it work with any other rom?
Click to expand...
Click to collapse
I'll try another ROM to see if this boot problem is specific to Fatal1ty or if something's wrong with my phone ._.
Azure Flame Kite said:
Well, I didn't put it in any folder and certainly not in the folder that says "usbStorage" on it. Please excuse me for my aloofness in this matter as I still don't quite understand how to access my internal SD card.
I have USB-debugging enabled and when I connect to my storage, I have something like this:
So, which one of these is the internal SD card? ._.
Click to expand...
Click to collapse
JJEgan said:
Agree numbered zip makes no difference if it ends as .zipYou can even rename the zip.
jje
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Well every time I tried flasing a file like that ( e.g : update-cm-9-20120331-CODEWORKX-galaxys2-signed(2).zip) it will not work.
I tried two different ROMs: The Thebyani ICS one and the VK ICS one.. both have the same problem as Fatal1ty: They're stuck on the boot screen.
EDIT: It seems that this problem seems big, as every ROM that I flash (with wipes) takes <5 seconds to finish, and that usually means that it's a bad flash ._.
Can someone tell me how to solve this?
Okay, here's a sum-up of the problem thus far:
1. Root is fine with any kernel, device functions without any problems.
2. When I want to flash a custom ROM via CWM, it takes <5 seconds to finish and is stuck at the boot logo.
3. Unrooting solves this.
Something must be faulty with the device... Flashing kernels and back to stock is without any complications, yet when I wanna flash a custom ROM, it's stuck at the boot logo ._.
Hi fellows,
I read that chainfire has not yet released cf-root for XELLA rom.
and my question is how can i root my device without installing custom rom?
if that's not possible, is there a kernel that i can flash that roots my phone without so much tweaks.
Rooting
Download CF-Root-SGS3-v6.4.zip on your computer and extract the file.
from h**p://download.chainfire.eu/196/CF-Root/SGS3/CF-Root-SGS3-v6.4.zip
Open ODIN
Switch off your phone and enter into download mode.
(To enter into download mode you need to press Volume down button and Home button simultaneously while turning the phone on.)
Hope you have your device’s USB drivers installed on your computer if not install it.
Now open ODIN on your computer and connect your device to computer while your phone is on download mode.
When your device will be connected to your computer, one ID:COM boxes will turn yellow/Blue after some time.
Select the files that you have to flash or install on your device from the extracted files in first download.
Now in ODIN, check for Auto Reboot and F. Reset Time options.and for the Re-partition option, check only if you have selected .PIT file above.
Click start in ODIN and the flashing will begin.
This flashing might take some time.As soon as the installation ends your device will restart.
Unplug your device from computer.
Switch it off again after it turns on completely and boots to home screen.
Now you need to enter into recovery mode,to enter into recovery switch on the phone while pressing Volume up,Home and Power buttons together.
Navigate with volume buttons to and select wipe data/factory reset from the recovery menu.
Select reboot system now and wait for device to boot again.
You are done, you rooted your Samsung Galaxy S3 I9300 to 4.1.2 Jelly Bean I9300XXELLA Final Firmware.
dimi22 said:
Hi fellows,
I read that chainfire has not yet released cf-root for XELLA rom.
and my question is how can i root my device without installing custom rom?
if that's not possible, is there a kernel that i can flash that roots my phone without so much tweaks.
Click to expand...
Click to collapse
i rooted stock xxellc yesterday using chainfire. no probs.
use google or the above helpful post for method.
Is XELLA the latest firmware or is it just an OTA?
ToonTonic said:
Is XELLA the latest firmware or is it just an OTA?
Click to expand...
Click to collapse
Firmware
Questions go in the QA section, not general
arinrizk said:
Download CF-Root-SGS3-v6.4.zip on your computer and extract the file.
from h**p://download.chainfire.eu/196/CF-Root/SGS3/CF-Root-SGS3-v6.4.zip
Open ODIN
Switch off your phone and enter into download mode.
(To enter into download mode you need to press Volume down button and Home button simultaneously while turning the phone on.)
Hope you have your device’s USB drivers installed on your computer if not install it.
Now open ODIN on your computer and connect your device to computer while your phone is on download mode.
When your device will be connected to your computer, one ID:COM boxes will turn yellow/Blue after some time.
Select the files that you have to flash or install on your device from the extracted files in first download.
Now in ODIN, check for Auto Reboot and F. Reset Time options.and for the Re-partition option, check only if you have selected .PIT file above.
Click start in ODIN and the flashing will begin.
This flashing might take some time.As soon as the installation ends your device will restart.
Unplug your device from computer.
Switch it off again after it turns on completely and boots to home screen.
Now you need to enter into recovery mode,to enter into recovery switch on the phone while pressing Volume up,Home and Power buttons together.
Navigate with volume buttons to and select wipe data/factory reset from the recovery menu.
Select reboot system now and wait for device to boot again.
You are done, you rooted your Samsung Galaxy S3 I9300 to 4.1.2 Jelly Bean I9300XXELLA Final Firmware.
Click to expand...
Click to collapse
I think this method will flash the kernel and the sudden death fix will not stay is that true? and are there risks because of the locked bootloader.
Read a topic where someone bricked his phone because he flashed another stock firmware on xella update.
dimi22 said:
Read a topic where someone bricked his phone because he flashed another stock firmware on xella update.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dimi22 said:
I think this method will flash the kernel and the sudden death fix will not stay is that true? and are there risks because of the locked bootloader.
Read a topic where someone bricked his phone because he flashed another stock firmware on xella update.
Click to expand...
Click to collapse
Why are people referring to the ELLA bootloader as locked? It's not locked because you can root/flash to your heart's content, the only difference is a custom kernel or recovery will set the flash counter back to 1 after TA, simple to get round. Flash a stock kernel, run TA, flash stock rom (without entering recovery), wipe data in stock recovery. How is that so hard for people to get round?
Oke guys,,,, my point is i always thought that flashing CF ROOT is flashing kernel!!
SO if i flash latest CF ROOT my safe XELLA kernel is gone..... is that not right ???
dimi22 said:
Oke guys,,,, my point is i always thought that flashing CF ROOT is flashing kernel!!
SO if i flash latest CF ROOT my safe XELLA kernel is gone..... is that not right ???
Click to expand...
Click to collapse
Yes thats right so there is no way to root XELLA with keeping STOCK kernel and STOCK recovery for safety of SDS.
I used CF-auto root which worked like a charm!
robertreyez said:
I used CF-auto root which worked like a charm!
Click to expand...
Click to collapse
and do you have the same kernel i think CF root flashed an older kernel??
dimi22 said:
Oke guys,,,, my point is i always thought that flashing CF ROOT is flashing kernel!!
SO if i flash latest CF ROOT my safe XELLA kernel is gone..... is that not right ???
Click to expand...
Click to collapse
to be safe or not , I myself 100% sure that XELLA don't contain the fix . why ?! I installed the XELLA and my device died two days ago.
as long as Samsung didn't announce that "a certain rom" got the fix , No one is safe.
I communicated with STOMAX please find his posts " specially the Post where he introduced his custom ROM Stomax v13"
final words (My opinion)
Samsung didn't officially announce the fix (even the bug) == No one is safe.
Good Luck
Flashing cf root does not flash a kernel. If you flash cf root then flash one of the protected recoveries, you should be fine on XXELLA
slaphead20 said:
Flashing cf root does not flash a kernel. If you flash cf root then flash one of the protected recoveries, you should be fine on XXELLA
Click to expand...
Click to collapse
oke and how do i flash the xella recovery then?
If you are flashing via Odin you will have stock recovery, if you then want a custom/protected recovery flash with mobile Odin/cwm depending on format it comes in
Hi friends I need help!!.
My Galaxy SIII i9300 stuck on initial Logo.
***Since march 19 was the last time that I install the FoxHound Custom ROM But NEVER has fault, Today when an incoming SMS to the smartphone it restarts and stuck on initial logo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can enter on recovery mode but I think that I have a problem here, because in the recovery says that:
And when I try to do anything in the recovery the smartphone restarts automatically and don´t do anything, and when I can install another custom ROM from ext-SDcard all goes good, but when I restart it stuck on initial logo again.
I flash with Odin
(Odin3 v1.85 y Odin3 v3.04)
2 officials firmwares from "samfirmware.com"
and also the: CF-Auto-Root-m0-m0xx-gti9300.tar
and the CF-SGS3-CWM-v5.5-v1.5
and the CF-Root-SGS3-v6.4
and none of it worked, all give me the same error.
The kies doesn´t detects it....
(I close all the kies process when I use odin....)
Any suggestion?
Obviously it lost the warranty because the flash counter says 2 and I can not delete it because it does not start :S
Other info:
Last ROM: Foxhound 2.4
Kernel: Siyah
Recovery: Siyah
julio_ton said:
Hi friends I need help!!.
My Galaxy SIII i9300 stuck on initial Logo.
***Since march 19 was the last time that I install the FoxHound Custom ROM But NEVER has fault, Today when an incoming SMS to the smartphone it restarts and stuck on initial logo.
I can enter on recovery mode but I think that I have a problem here, because in the recovery says that:
And when I try to do anything in the recovery the smartphone restarts automatically and don´t do anything, and when I can install another custom ROM from ext-SDcard all goes good, but when I restart it stuck on initial logo again.
I flash with Odin
(Odin3 v1.85 y Odin3 v3.04)
2 officials firmwares from "samfirmware.com"
and also the: CF-Auto-Root-m0-m0xx-gti9300.tar
and the CF-SGS3-CWM-v5.5-v1.5
and the CF-Root-SGS3-v6.4
and none of it worked, all give me the same error.
The kies doesn´t detects it....
(I close all the kies process when I use odin....)
Any suggestion?
Obviously it lost the warranty because the flash counter says 2 and I can not delete it because it does not start :S
Other info:
Last ROM: Foxhound 2.4
Kernel: Siyah
Recovery: Siyah
Click to expand...
Click to collapse
go get a jig or search here how to make one by yourself. it will reset the counter from 2 to 0. after that just go to service center and give your device.
hit thanks if I helped.
amit34521 said:
go get a jig or search here how to make one by yourself. it will reset the counter from 2 to 0. after that just go to service center and give your device.
hit thanks if I helped.
Click to expand...
Click to collapse
Some people says that USB JIG on SGS3 does not remove the rom count only access download mode. I search on google
julio_ton said:
Some people says that USB JIG on SGS3 does not remove the rom count only access download mode. I search on google
Click to expand...
Click to collapse
cant say coz worked for my frnd. he made that one. or try to use any other odin package from here or from live.samsung-updates.com and use. well dont give up hope coz i know about read that jig doesnt work on sgs3 but i saw so u can try it too. your phone is worth it.
hit thanks if I helped.
Download the pills recovery file from pills thread pace it on ur extsd card and then install via he recovery u r booting into
Then finally once pills recovery installation finishes go to Phills recovery and change ur kernel
please use a normal font.
usb jig has no effect on the counter on this phone
SDS
Sorry to say it buddy but your phone has died from SDS
The only way to fix it is to replace the motherboard..
pricey2009 said:
Sorry to say it buddy but your phone has died from SDS
The only way to fix it is to replace the motherboard..
Click to expand...
Click to collapse
Really!!!! no way
How can I make to never turn-on it again??
invinciblecc said:
Download the pills recovery file from pills thread pace it on ur extsd card and then install via he recovery u r booting into
Then finally once pills recovery installation finishes go to Phills recovery and change ur kernel
Click to expand...
Click to collapse
Doesn´t work
Glebun said:
please use a normal font.
usb jig has no effect on the counter on this phone
Click to expand...
Click to collapse
Sorry, editing now
That sure is not sds, sds means no reaction at all, just black screen...
Did you try flashing philz recovery, then going into mounts and storage and formatting all partitions, after that flash a stock rom with odin
_________________________
tapatalked from GalaxyS3
FadeFx said:
That sure is not sds, sds means no reaction at all, just black screen...
Did you try flashing philz recovery, then going into mounts and storage and formatting all partitions, after that flash a stock rom with odin
_________________________
tapatalked from GalaxyS3
Click to expand...
Click to collapse
Yes I try to flash Philz recovery and the recovery says it´s successfull the installation but doesn´t work, when I try to format anythig I got this error on recovery:
"E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p8"
FadeFx said:
That sure is not sds, sds means no reaction at all, just black screen...
Click to expand...
Click to collapse
no, not necessarily
Glebun said:
no, not necessarily
Click to expand...
Click to collapse
Exactly so.....you can have no screen or anything at all, or you can have no recovery but d/l mode still shows (worst case scenario)
Try flashing pit files with repartition ticked,to reformat partitions and then flash a Sammy stock rom(not deodexed or with root).worked on gs2 and should work on gs3 too..
slaphead20 said:
Exactly so.....you can have no screen or anything at all, or you can have no recovery but d/l mode still shows (worst case scenario)
Click to expand...
Click to collapse
I had SDS but the phone still booted.. just completely unusable with black squares all over the screen.. Samsung gave me a new phone saying it was the SDS issue..
Sent from my GT-I9300 using xda app-developers app
I have a problem about my Android Phone, last last month was my first time to have an android phone and im very excited to install apps and somehow to customize it.
One day while searching and reading on google I saw something interesting which is Rooting Android, I tried it and successfully rooted my phone and there's no problem but I know that if my phone is rooted I can customize my ROM, Upgrade my phone version and etc.. Im very interested with that, so I used to search more about how to install custom ROM and I have read some forum threads that has a steps on how to install custom rom and what tools to used, i dont know if that's what im looking for but I just followed the intructions and steps and then applied it on my phone.
When im about to install Custom ROM I used MTKdroidtools for my O+ 8.2 Android 2.3.5 Gingerbread for creating backups, after that procedure there's a notification that I will reboot my android phone via CWM Recovery Mode then I reboot it, then it turned off and turned on I know that im in Recovery Mode because I have encountered it before.
Then here comes my crazy idea and I don't know why but I just continued to do it, I clicked the Wipe Data or Wipe All Cache Data I forgot it then after that the next thing I did was to installed the Custom ROM("ICS_DARK_BREED_V_A818_by_BassureroX") which I have downloaded on my SD Card then reboot my phone again and then its not working anymore I mean it's stack in bootloop which my friend says that's what happened to my phone, I regret on what I have done I really need to recover my phone back to normal again please help me.
Is there any thing I can do? I hope there's still a solution for my phone problem.
Thank You.
Here's the images of my phone after installing that Custom ROM:
*When Opening:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*When Pressing Buttons (Power + Volume Up):
*When Charging:
yobib_814 said:
I have a problem about my Android Phone, last last month was my first time to have an android phone and im very excited to install apps and somehow to customize it. One day while searching and reading on google I saw something interesting which is Rooting Android, I tried it and successfully rooted my phone and there's no problem but I know that if my phone is rooted I can customize my ROM, Upgrade my phone version and etc.. Im very interested with that, so I used to search more about how to install custom ROM and I have read some forum threads that has a steps on how to install custom rom and what tools to used, i dont know if that's what im looking for but I just followed the intructions and steps and then applied it on my phone. When im about to install Custom ROM I used MTKdroidtools for my O+ 8.2 Android 2.3.5 Gingerbread for creating backups, after that procedure there's a notification that I will reboot my android phone via CWM Recovery Mode then I reboot it, then it turned off and turned on I know that im in Recovery Mode because I have encountered it before. Then here comes my crazy idea and I don't know why but I just continued to do it, I clicked the Wipe Data or Wipe All Cache Data I forgot it then after that the next thing I did was to installed the Custom ROM("ICS_DARK_BREED_V_A818_by_BassureroX") which I have downloaded on my SD Card then reboot my phone again and then its not working anymore I mean it's stack in bootloop which my friend says that's what happened to my phone, I regret on what I have done I really need to recover my phone back to normal again please help me. Is there any thing I can do? I hope there's still a solution for my phone problem.
Thank You.
Here's the images of my phone after installing that Custom ROM:
*When Opening:
*When Pressing Buttons (Power + Volume Up):
*When Charging:
Click to expand...
Click to collapse
Use paragraph, your post is very difficult to read.
Now, regarding your problem, try to wipe /system, /data and /cache from recovery, flash the rom and wipe /data and /cache again.
Sent from my GT-I9100 using XDA Free mobile app
totalnoob34 said:
Use paragraph, your post is very difficult to read.
Now, regarding your problem, try to wipe /system, /data and /cache from recovery, flash the rom and wipe /data and /cache again.
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
i paragraphed it sir.
as you said to wipe / system, /data and /cache from recovery, flash the rom and wipe /data and /cache again, i cant enter to that function in my phone.
All i can do is to use SP Flash Tool but i dont know what version is compatible with my phone, thank you.
Bump .
yobib_814 said:
i paragraphed it sir.
as you said to wipe / system, /data and /cache from recovery, flash the rom and wipe /data and /cache again, i cant enter to that function in my phone.
All i can do is to use SP Flash Tool but i dont know what version is compatible with my phone, thank you.
Click to expand...
Click to collapse
I'm so sorry, xda mobile app didn't show it correctly I suppose.
totalnoob34 said:
I'm so sorry, xda mobile app didn't show it correctly I suppose.
Click to expand...
Click to collapse
what do you mean sir? that you cant search my phone here in xda?
anyway my phone is O+ Android 8.2 and it's china phone or an imitation i think, is there any tool that can help me to get into recovery mode even if my phone is turned off and uses only usb cable connected to the pc?
yobib_814 said:
what do you mean sir? that you cant search my phone here in xda?
anyway my phone is O+ Android 8.2 and it's china phone or an imitation i think, is there any tool that can help me to get into recovery mode even if my phone is turned off and uses only usb cable connected to the pc?
Click to expand...
Click to collapse
I meant the app didn't show the paragraphs in your post. Anyway, the only way to boot a turned off phone in recovery is by a key combo, generally POWER + VOL+ or POWER + VOL-, depending on the model
totalnoob34 said:
I meant the app didn't show the paragraphs in your post. Anyway, the only way to boot a turned off phone in recovery is by a key combo, generally POWER + VOL+ or POWER + VOL-, depending on the model
Click to expand...
Click to collapse
I can now enter to the recovery mode sir.
*Here is a short explanation for what really happened:
I have an android phone(Rooted & ROM Manager installed).
I used MTK Droidtools for backups, rebooted and autoCWM was created.
I Wiped Data/Factory Reset then Install the Custom ROM from SD Card, when finished i rebooted my phone then its not working anymore.
But i can charge it and i can also enter to autoCWM when pressing Power Button+Camera Button+Volume Up Button.
is there anything i can do?
yobib_814 said:
I can now enter to the recovery mode sir.
*Here is a short explanation for what really happened:
I have an android phone(Rooted & ROM Manager installed).
I used MTK Droidtools for backups, rebooted and autoCWM was created.
I Wiped Data/Factory Reset then Install the Custom ROM from SD Card, when finished i rebooted my phone then its not working anymore.
But i can charge it and i can also enter to autoCWM when pressing Power Button+Camera Button+Volume Up Button.
is there anything i can do?
Click to expand...
Click to collapse
Yes, if you can boot into recovery mode then you can try flashing another rom for your phone, maybe checking the integrity of the file before flashing it
totalnoob34 said:
Yes, if you can boot into recovery mode then you can try flashing another rom for your phone, maybe checking the integrity of the file before flashing it
Click to expand...
Click to collapse
yes i want to flash another ROM on my android sir because i dont have backup of my ROM, my phone is O+ 8.2 Android, 2.3.5 Gingerbread, MT6573.
Can you help me sir for what ROM must be for my phone? and thank you very much for the replies.
yobib_814 said:
yes i want to flash another ROM on my android sir because i dont have backup of my ROM, my phone is O+ 8.2 Android, 2.3.5 Gingerbread, MT6573.
Can you help me sir for what ROM must be for my phone? and thank you very much for the replies.
Click to expand...
Click to collapse
Repeat the model please, I didn't understand it. And, where did you get the rom you flashed and screw your phone up?
totalnoob34 said:
Repeat the model please, I didn't understand it. And, where did you get the rom you flashed and screw your phone up?
Click to expand...
Click to collapse
sorry for that, the model is O+ 8.2 Android
and it's a MT6573 device, i got the ROM here: http://www.symbianize.com/showthread.php?t=916396
its been a month after i screwed my phone
yobib_814 said:
sorry for that, the model is O+ 8.2 Android
and it's a MT6573 device, i got the ROM here: http://www.symbianize.com/showthread.php?t=916396
its been a month after i screwed my phone
Click to expand...
Click to collapse
I had a look on the net, and I could not find any stock nor custom rom for your model. I think you flashed a rom for another model, and of course now the phone is obviously not booting.
If you can find a way to return to stock rom you're good to go, maybe looking on the website of the manifacturer, otherwise there is nothing much to do..
Keep in mind for the next time to double check what you're flashing, and to always backup first.
totalnoob34 said:
I had a look on the net, and I could not find any stock nor custom rom for your model. I think you flashed a rom for another model, and of course now the phone is obviously not booting.
If you can find a way to return to stock rom you're good to go, maybe looking on the website of the manifacturer, otherwise there is nothing much to do..
Keep in mind for the next time to double check what you're flashing, and to always backup first.
Click to expand...
Click to collapse
im really regretting for what ive done
and yes its not booting, and i made a backup but its gone because my aunts pc got reformatted. Maybe i should ask on some forums if they do have a stock rom or custom rom of the same model of my phone and wait
and if you see stock or custom rom for my device kindly PM me sir, and thank you very much for the time godbless you my friend.
yobib_814 said:
im really regretting for what ive done
and yes its not booting, and i made a backup but its gone because my aunts pc got reformatted. Maybe i should ask on some forums if they do have a stock rom or custom rom of the same model of my phone and wait
and if you see stock or custom rom for my device kindly PM me sir, and thank you very much for the time godbless you my friend.
Click to expand...
Click to collapse
No problem. I'm sorry to hear that. You can try to recover the backup file from the formatted pc
totalnoob34 said:
No problem. I'm sorry to hear that. You can try to recover the backup file from the formatted pc
Click to expand...
Click to collapse
ill try to check the backup file of the formatted pc, is it in local disk D?
You need change phone?
totalnoob34 said:
No problem. I'm sorry to hear that. You can try to recover the backup file from the formatted pc
Click to expand...
Click to collapse
good day sir!
i have found my backup files created via cwm last july 2014, here are the images:
*what will i do sir?
*and how can i restore it using rua1 autoCWM v5.5.0.4 installed on my phone.
*thank you very much for your time
yobib_814 said:
good day sir!
i have found my backup files created via cwm last july 2014, here are the images:
*what will i do sir?
*and how can i restore it using rua1 autoCWM v5.5.0.4 installed on my phone.
*thank you very much for your time
Click to expand...
Click to collapse
Put that in /clockworkmod on your sdcard, reboot to recovery, try to restore that and cross your fingers
totalnoob34 said:
Put that in /clockworkmod on your sdcard, reboot to recovery, try to restore that and cross your fingers
Click to expand...
Click to collapse
i tried putting only the "Android_130531_backup_140707.." on /clockworkmod/backup and it restores some files but still not booting and i think i did it wrong.
as you said put it(ALL) do you mean all of them sir? hmm
ok i'll do it and feedback on you later thank you very much! hope my phone will get back to normal again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 2.8.7.0 for the Samsung Galaxy J5
Hey everyone. I have decided to build TWRP recovery for the Galaxy J5.
First I would love to thank @bhattjunaid for testing this since I don't own this device, @celta1976 For managing to get this working on Locked bootloader models and his Instructions (Instructions In 1st Comment of the post), @serdotlinecho For the instructions how to fix Bootloop into TWRP (Instructions in 1st Comment of the post) and TeamWin for the amazing sources that are still supported.
DISCLAIMER : I AM NOT RESPONSIBLE VOIDING YOUR WARRANTY OR ANY DAMAGE CAUSED TO YOUR DEVICE EVEN THOUGH NOTHING SHOULD GO WRONG IF YOU DO EVERYTHING RIGHT! KNOX WILL BE TRIPPED. ALSO... I AM NOT RESPONSIBLE FOR WW3 OR A ZOMBIE OUTBREAK
Ok, Now to the interesting part
Already tested on:
- Galaxy J500F Working
- Galaxy J500H Working
- Galaxy J5008 Working - Instructions in 1st post of this thread! - (Locked bootloader)
- Galaxy J5007 Not tested yet
- Galaxy J500G Working
- Galaxy J500M Working
- Galaxy J500N0 Not tested yet
- Galaxy J500FN Working
- Galaxy J500Y Not tested yet
Note : This should work on all models. However, just to be sure, if you own a J5 model that has not been tested yet, please post a confirmation below
Bugs
- Brightness slider
- PC mounting (but adb should work)
- Reboot into recovery mode from/via TWRP not working
Changelog
07.10.2015
Code:
TWRP Has been made
Screenshots
Instructions
Here are some notes before you start :
Make sure you enabled the unlock bootloader option in the developer's settings.
THIS WILL SET KNOX TO 1
I am not responsible for voiding your warranty with this, it's your choice.
1. Download the PC USB drivers for your Phone
2. Download TWRP (link below)
3. Download Odin 3
4. Turn off your phone
5. Boot into download mode (Power + VOL down + Home)
6. In menu select continue (VOL up)
7. Now connect your phone to your PC
8. Open Odin. Make sure your device is recognized.
9. Click PDA on older Odin versions or AP on newer versions
10. Find TWRP
11. Click start and wait until it's done.
12. Reboot into recovery by booting with VOL UP + HOME + POWER and have fun.
Download
PLEASE DO NOT MIRROR UNLESS I GIVE YOU PERMISSION! IF YOU NEED PERMISSION THEN PM ME!
If you don't want to risk loosing your data do a backup!!!!!!!!!
TWRP 2.8.7.0
Source code : https://github.com/TWRP-J5
Have fun!
Instructions for specific models
1. How to flash TWRP with locked bootloader by @celta1976
2. How to fix TWRP bootloop (Device restarts into TWRP every time) by @serdotlinecho
1. Instruction for Locked Bootloader Models by @celta1976
1. Download CROM Services, file .apk here : http://forum.xda-developers.com/showpost.php?p=60204006&postcount=5 and install it. Then execute it on the phone.
2. Next up flash this file via odin : https://download.chainfire.eu/718/CF...xx-sme500h.zip
And finally, install TWRP !!
2. How to fix TWRP bootloop by @serdotlinecho
If your TWRP is bootlooping please do the following :
1. Go to sammobile and download the stock Firmware and extract the zip
2. Put your phone into download mode
3. Connect your phone with your pc
4. Open odin and select PDA on older versions or AP on newer versions.
5. Select the stock firmware
6. Click start and wait until its done.
7. Re-flash TWRP.
8. Now you should be able to boot into TWRP and system
installed on J500FNXXU1AOG1 confirmed it works fine
Good to know.
wegiwegi said:
installed on J500FNXXU1AOG1 confirmed it works fine
Click to expand...
Click to collapse
Thanks! :good:
It works fine on SM-J500G too. But I have to flash the stock firmware after flashing twrp with odin on my rooted device. My device cannot boot into system, keep booting into twrp every time I reboot from twrp menu. After flashing stock firmware and and re-flash twrp, my device can now boot into system when I choose reboot from twrp menu. Thanks for the twrp tar file.
serdotlinecho said:
It works fine on SM-J500G too. But I have to flash the stock firmware after flashing twrp with odin on my rooted device. My device cannot boot into system, keep booting into twrp every time I reboot from twrp menu. After flashing stock firmware and and re-flash twrp, my device can now boot into system when I choose reboot from twrp menu. Thanks for the twrp tar file.
Click to expand...
Click to collapse
Thanks! I have posted the fix
CTXz said:
Thanks! I have posted the fix
Click to expand...
Click to collapse
can you make fixed recovery ? because i edited some system files when i reflash stock rom all reset to origins
can you make fixed recovery ? because i edited some system files when i reflash stock rom all reset to origins
Click to expand...
Click to collapse
Did you backup data? What model do you have
CTXz said:
Did you backup data? What model do you have
Click to expand...
Click to collapse
yes
j500g
mlm1102003 said:
yes
j500g
Click to expand...
Click to collapse
So if I understand correctly... You restored a old backup but it didn't restore the apps. If that's the case, did it say any errors when you tried to restore
CTXz said:
So if I understand correctly... You restored a old backup but it didn't restore the apps. If that's the case, did it say any errors when you tried to restore
Click to expand...
Click to collapse
no
i have edited some system files
when i want to factory reset
it go to stock recovery
i want a custom recovery
which do factory and dont stuck or boot loop to recovery
i have used your recovery
when i try to factory reset it do factory reset but after that phone boot to recovery (not system)
mlm1102003 said:
no
i have edited some system files
when i want to factory reset
it go to stock recovery
i want a custom recovery
which do factory and dont stuck or boot loop to recovery
i have used your recovery
when i try to factory reset it do factory reset but after that phone boot to recovery (not system)
Click to expand...
Click to collapse
Sadly I really don't know what could cause the issue. My best guess is the boot.img . Once I am at home I will send you some instructions how to flash the boot.img
OK instructions.
To flash bootimg download the stock Rom from sammobile. Then open the ZIP. Next open the ZIP inside the ZIP by removing .md5 . then take out the boot.img. once you enter twrp flash the Boot.IMG.with the flash IMG option
I just tried it in my j500m and it worked! Now just waiting for a great rom
Enviado desde mi SM-J500M mediante Tapatalk
bighleo114312 said:
I just tried it in my j500m and it worked! Now just waiting for a great rom
Enviado desde mi SM-J500M mediante Tapatalk
Click to expand...
Click to collapse
Thanks!
Is there a way to root this device without using PC ? like one click root or something like that ?
I dnt have access to PC and need to root the device.
Hello. I know that this post is off topic, but this is the only "popular" thread for this phone and it doesn't have it's own forum yet.
@CTXz : I hope you won't get mad on me for mentioning you Maybe you can answer me about what I wrote below.
I got Samsung Galaxy J5 SM-J600FN yesterday. It is a nice phone for 200euros... But I experienced a problem. When I put a call in speaker mode, the person with who I'm talking won't hear me after few seconds and when I switch back to normal mode (speaker off) he can hear me. Now it started to happen in normal calls too. I did put network in 2G to consume less MB, I don't know if this might be a problem.
Anybody else experienced this? I'm wonder if it is a hardware issue or software issue.
Also, the volume buttons and power button is moving lil bit in left-right, I don't know if is a problem at all because are working. So, people who has this device, please let me know if buttons are same to you and if you experienced that call problem.
Thank you! Have a nice day! Robert.
PS: I'm sorry if my English is bad
Force said:
Hello. I know that this post is off topic, but this is the only "popular" thread for this phone and it doesn't have it's own forum yet.
@CTXz : I hope you won't get mad on me for mentioning you Maybe you can answer me about what I wrote below.
I got Samsung Galaxy J5 SM-J600FN yesterday. It is a nice phone for 200euros... But I experienced a problem. When I put a call in speaker mode, the person with who I'm talking won't hear me after few seconds and when I switch back to normal mode (speaker off) he can hear me. Now it started to happen in normal calls too. I did put network in 2G to consume less MB, I don't know if this might be a problem.
Anybody else experienced this? I'm wonder if it is a hardware issue or software issue.
Also, the volume buttons and power button is moving lil bit in left-right, I don't know if is a problem at all because are working. So, people who has this device, please let me know if buttons are same to you and if you experienced that call problem.
Thank you! Have a nice day! Robert.
PS: I'm sorry if my English is bad
Click to expand...
Click to collapse
Hey no i'm not mad
The calling issue is most likely software. It's also quite common. Try to wipe cache. If the problem presists you can make a twrp backup and install the stock rom again. Then restore the backup data etc.
The buttons are totally fine. All my Samsung phones/tablets have that. Why? Dunno.
CTXz said:
Hey no i'm not mad
The calling issue is most likely software. It's also quite common. Try to wipe cache. If the problem presists you can make a twrp backup and install the stock rom again. Then restore the backup data etc.
The buttons are totally fine. All my Samsung phones/tablets have that. Why? Dunno.
Click to expand...
Click to collapse
Gonna wipe the cache now.
About buttons, you gave me that peace of kind by saying that I was worried that could get break soon or that I got a device with problems. At my previous phone named Galaxy S Advance the buttons were moving too but less and I have used it for 2+ years, I never checked buttons before tho.
I won't install other stock Rom yet until I'm sure that I won't break that Knox. I'm new to this Knox protection and I haven't read much about it. I already miss so many root apps from previous phone
May I ask you in how much time does charge your J5? Mine charged in 4-5 hours when it was powered off, I did this two times and now I think i won't repeat it again.
Thank you alot for your answer.
If you reflash stock it wont break stock. But if you flash twrp it will