After android 10 update it shows " to start android required password". I follow the instruction that is in asus website to solve from password but when I follow the instructions using power +vol down key it show "no command". I call and email the customer care, both they told me to contact service centre.
At that time I follow a person's instruction on you tube it solved the problem.
Android 10 password problem solved but no command option still remain at recovery mode(pressings power + vol down button)..pls suggest anybody.
No command problem solved
How to solve no command problem
Please tell me how to solve no command problem in android 10
1. Switch off the phone.
2. Press power button & vol down button after phone start release the both button.
3. Phone show the no command option
4. Press power button for 2 sec then press the vol up button for 1 sec and release both button.
5. It shows the recovery option and select wipe data
6. After wipe data select reboot to system.
7. Enjoy the fresh android.
Related
Hello, the tablet CN98 Chinese Not starting... Is remaing to loading Android for 20 minutes, I didn't found recovery menu, any suggestion? thanks for help
get the orginal frimware from Crony company
and follow this steps:
1 . Acqure the firmware file from manufacturer
2. Download livesuit (http://www.mediafire.com/download.php?lawkcbqhbictar4).
Follow these Instructions to flash .img file through livesuite (I found them elsewhere):
3. Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe
4.Select the firmware
Click the cube to the far left to select the firmware .img file.
5. Turn off your tablet
6. Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.
7. Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
8. Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.
9. The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."
10. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
11. Congratulations! You have flashed the firmware.
corny china tablet recovery mode
hi bros follow simple instruction to get recovery mode on corny tablet. press and hold reset button till screen off then release reset button . and press and hold volume up till u get recovery mode. tested by me
awesome man this trick works great..
i tried whole internet and nothing else works ..
thanks a ton @abuafee
how can i find the firmware for my tablet? Crony CN997G
Can anyone please help me for a solution to recover my phone from it's bootloop state, I tried factory reset from stock recovery but it doesn't help, phone still unable to boot to homescreen. Been looking all over the Internet but no luck finding the firmware for ZTE blade S7 t920. I haven't enable the USB debugging on the settings so my pc doesn't detect the phone
Not sure if you manage to sort out you problem yet but you can download a ROM from the ztedevice dot com website and copy the update.zip file to the root directory of your memory card then you do the following:
Forced upgrade (for the phones that cannot be started or the phones that cannot enter standby state)
1) For a powered-off phone, press and hold both the volume key + and power key to enter into Recovery mode.
2) Press the volume key - to select apply update from sdcard, and press the power key to confirm it.
3) Press the volume key - to select the update.zip file, and press the power key to confirm it. The phone completes the upgrade process in about three minutes.
4) On the Upgrade Complete screen, select reboot system now and press the power key to confirm it.
My cell phone model is Huawei Y536A1. It suddenly turned on by itself for several times and then finally my phone screen just stayed on the "android". I tried several ways to deal with the problem, but sill could not work.
I tried ...
1. Alternate Master Reset Method: a) press and hold the Volume Up and the Power key for 8 seconds, then release b) Press the Volume down key until "wipe data/factory reset" is highlighted c) Press the Power key to select > Press the Volume down key until "Yes -- delete all user data" is highlighted d) Press the Power key to select e) Once data has been wiped, a green "OK!" with a checkmark will be displayed f) With "reboot system now" highlighted, press the Power key to select.
--> it did not work for my phone.
2. I also tried "wipe cache partition". It still did not work. It went back to the logo "android" again.
3. I went to AT&T store. They could not help because of out of the warranty. A staff even did not want to try. It's very frustrating. Later, I asked them to change my sim card to my traditional old AT&T phone. So, my Huawei Y536A1 is no sim card now. However, i still want to use it if it can work.
After I took out of the sim card, my phone screen will stay a global sign for a while and then turn of by itself. ><
I would very appreciate if anyone could give me possible suggestions to fix that problem.
Thank you.
I tried to reset the windows and from that moment I have only the logo of your company and after that a black screen.
I did the following :
1. At the very beginning i hold down the Power key in order to switch on the device.
2. Afterwards i hold down Shift key (on screen keyboard).
3. While the Shift key is still pressed, i tap Restart option and confirm the operation.
4. In the next step i choose Troubleshoot.
5. Then i tap Reset my PC and i confirm operation by pressing Next.
6. I choose Fully clean the drive.
After some time, the message I got was: "There was an error and hit cancel".
I tried to cancel it but it was nothing happen. So i shut it down.
After that i try to get in bios:
I push the power button and hit the "del" on my keyboard but nothing happens.
( I connected the keyboard to the device on USB )
my device simply makes restarting all the time.
Can you tell me what to do?
best regards from GREECE
ps. I have only a Linux operation system on my PC.
hello,
i forgot my pattern. and i dont see where to recovery it .
i always use Fingers to unlock my phone
please help.
Here is instruction , but you will lose all data .
http://www.hardreset.info/devices/sharp/sharp-aquos-crystal-2/hardreset/first-method/
Teddy Lo said:
Here is instruction , but you will lose all data .
http://www.hardreset.info/devices/sharp/sharp-aquos-crystal-2/hardreset/first-method/
Click to expand...
Click to collapse
does not work on my aquos s2, not crystal 2. thanks anyway
This is for your device what I found on the Russian site .
1. First turn off the device
2. For a few seconds, hold down the Volume (+) + Turn on
3. When we see the Android image or the Sharp logo on the display, we stop clicking on the buttons
4. Press the Enable button to enter Recovery
5. In the menu, select wipe data / factory reset using the Volume Control buttons and confirm by pressing the Power key . 6. Then in the menu, select Yes - delete all user data by pressing the Volume Control keys and confirm the selection by pressing the Power key 7.
Teddy Lo said:
This is for your device what I found on the Russian site .
1. First turn off the device
2. For a few seconds, hold down the Volume (+) + Turn on
3. When we see the Android image or the Sharp logo on the display, we stop clicking on the buttons
4. Press the Enable button to enter Recovery
5. In the menu, select wipe data / factory reset using the Volume Control buttons and confirm by pressing the Power key . 6. Then in the menu, select Yes - delete all user data by pressing the Volume Control keys and confirm the selection by pressing the Power key 7.
Click to expand...
Click to collapse
you are right when my phone connect to my Pc
Thanks alot.
I have the same problem but can not doing the hard reset like the way you show here
It turned on the phone again after i press any button when seeing the logo, even trying to connect to pc
Please show me the other way
Thank you so much
UyenNguyen said:
I have the same problem but can not doing the hard reset like the way you show here
It turned on the phone again after i press any button when seeing the logo, even trying to connect to pc
Please show me the other way
Thank you so much
Click to expand...
Click to collapse
press both volume + and power button. ultil android logo appear