Hello everyone!
I have repacked @phhusson 's Quack Phh-Treble GSI to a flashable TAR file that we can flash on the S20 devices.
For more info about Quack Phh-Treble GSI check this thread here - https://forum.xda-developers.com/pr...velopment/aosp-10-0-quack-phh-treble-t3992559
You must have a device with an unlockable bootloader
What doesn't work?
Auto brightness
Fingerprint enrolment works 50% on first boot and randomly works when screen is off
Reports about MTP not working - could be a driver issue
Proximity Sensor
Screen timeout is always 15s
NFC
For a full list of issues, check the official github - https://github.com/phhusson/treble_experimentations/issues
What works?
Everything else!
Found something else that doesn't work? Let me know and I'll update the thread.
What do these repacks include
The official release of Quack Phh-Treble GSI with Gapps (system-quack-arm64-ab-gapps.img)
Cross Device Lineage Recovery Flashable - Phh SYSTEM image only!
Downloads
Download Quack_Phh-Treble_GSI_v217.zip from:
Mega - https://mega.nz/file/dowXRSYT#LaJSGNelVxPcerNkyN2QQVIYKos4Eea_dH10PId2JsM
AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261820046
How to install
If you are not rooted - follow Jesec's guide on how to root your device. Make sure you boot into setup at least once! - https://forum.xda-developers.com/galaxy-s20/how-to/howto-root-s20-series-upgrade-firmware-t4079353
If you do not have Lineage Recovery - again, follow Jesec's guide on how to install Lineage Recovery - https://forum.xda-developers.com/ga...recovery-lineage-recovery-s20-series-t4084977
Enter Recovery Mode and factory reset your device
Copy Quack Phh-Treble GSI vxxx.zip onto your external SD
In Lineage Recovery, choose Apply update
Choose Apply from disk
Choose Quack_Phh-Treble_GSI_vxxx.zip
Once installation is complete, reboot to system
Previous Versions
v216
Mega - https://mega.nz/file/g5RUHCID#1LqTrVnRotQwb5vLQQ0TGDN4vtgx4N4aHJza3yZkvU0
AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261800816
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
@phhusson for the Quack Phh-Treble
@jesec for root guids, Lineage Recovery, binary-update and help with creating the flashable zip
Have fun!!
Thanks, like to see AOSP in S20+
toystory said:
Thanks, like to see AOSP in S20+
Click to expand...
Click to collapse
This is for all S20 models, including S20+
Is this only for the global models or will this work on Sprint
AndroidBeginNinja said:
Is this only for the global models or will this work on Sprint
Click to expand...
Click to collapse
If you can unlock your device' bootloader and root it, it will work. Otherwise, no
This isn't for snapdragons in the US. Tired of this crap from Samsung and others
i can get gsi to install using dsu but when u press restart it hangs on splash screen a min or two then reboots normally.. so cant even boot gsi without root unfortunately on locked devices
WarEagleUS said:
This isn't for snapdragons in the US. Tired of this crap from Samsung and others
Click to expand...
Click to collapse
lol...
is the selinux set to permissive? can I only flash the kernel?
Unbranded Samsung 20 Pro
firefds said:
This is for all S20 models, including S20+
Click to expand...
Click to collapse
ah. but, I have a weird s20. The model number says it's an S20 Pro (build number is: m_l805_pmz_a6601_welcome_en_yl_128a16_v04 and a CSC of zmu1a0h5 - also note, i'm not sure if that's l805 or 1805 and yl or y1 - dunno). I got the thing on wish (ya, ya...bad idea, i know, but it's too late now). I'm not sure what ROM to get, if any. I'm hoping a friendly guru can help guide me. The phone says i'm using over 100gigs of internal storage, but...i don't have near enough apps to fill up that much. I installed one 26 meg app, yet the phone is claiming it took up 3gigs of space. Whaaaat?
Is there something I'm missing? I mean, cell phones confuse me sure, but (as a programmer) I think I understand the basics and this just baffles me. Will this ROM work on this phone? Can I change the CSC, cuz some things come up with chinese or korean lettering, which, of course, I can't read so that's annoying)
Sincerly
Jarett
JamRoll said:
ah. but, I have a weird s20. The model number says it's an S20 Pro (build number is: m_l805_pmz_a6601_welcome_en_yl_128a16_v04 and a CSC of zmu1a0h5 - also note, i'm not sure if that's l805 or 1805 and yl or y1 - dunno). I got the thing on wish (ya, ya...bad idea, i know, but it's too late now). I'm not sure what ROM to get, if any. I'm hoping a friendly guru can help guide me. The phone says i'm using over 100gigs of internal storage, but...i don't have near enough apps to fill up that much. I installed one 26 meg app, yet the phone is claiming it took up 3gigs of space. Whaaaat?
Is there something I'm missing? I mean, cell phones confuse me sure, but (as a programmer) I think I understand the basics and this just baffles me. Will this ROM work on this phone? Can I change the CSC, cuz some things come up with chinese or korean lettering, which, of course, I can't read so that's annoying)
Sincerly
Jarett
Click to expand...
Click to collapse
It's definitely a bad clone, Samsung S20 Pro doesn't even exist... I'd ask for a refund.
I'd love to see advancements on this in the future! Now that American models can unlock im sure lots of people would like to try stock Android.
does 120hz work on this?
ChongoDroid said:
I'd love to see advancements on this in the future! Now that American models can unlock im sure lots of people would like to try stock Android.
does 120hz work on this?
Click to expand...
Click to collapse
American Snapdragon models can be unlocked?
PieceofSlice said:
American Snapdragon models can be unlocked?
Click to expand...
Click to collapse
Yes
PieceofSlice said:
American Snapdragon models can be unlocked?
Click to expand...
Click to collapse
Yep, I just compiled a build of lineage os for the s20, I was gonna see if anyone wanted it.
ChongoDroid said:
Yep, I just compiled a build of lineage os for the s20, I was gonna see if anyone wanted it.
Click to expand...
Click to collapse
I'll give it a try on my 986U1 if you think it will work.
Misterxtc said:
I'll give it a try on my 986U1 if you think it will work.
Click to expand...
Click to collapse
Unfortunately x1q only for now, I can build for ultra and + in the future, just won't be able to test as I don't have them
I am on 9810 if testers needed
ChongoDroid said:
Unfortunately x1q only for now, I can build for ultra and + in the future, just won't be able to test as I don't have them
Click to expand...
Click to collapse
I'll test if you build it. I haven't built anything in a couple of years so I'm way to rusty to try right now.
JamRoll said:
ah. but, I have a weird s20. The model number says it's an S20 Pro (build number is: m_l805_pmz_a6601_welcome_en_yl_128a16_v04 and a CSC of zmu1a0h5 - also note, i'm not sure if that's l805 or 1805 and yl or y1 - dunno). I got the thing on wish (ya, ya...bad idea, i know, but it's too late now). I'm not sure what ROM to get, if any. I'm hoping a friendly guru can help guide me. The phone says i'm using over 100gigs of internal storage, but...i don't have near enough apps to fill up that much. I installed one 26 meg app, yet the phone is claiming it took up 3gigs of space. Whaaaat?
Is there something I'm missing? I mean, cell phones confuse me sure, but (as a programmer) I think I understand the basics and this just baffles me. Will this ROM work on this phone? Can I change the CSC, cuz some things come up with chinese or korean lettering, which, of course, I can't read so that's annoying)
Sincerly
Jarett
Click to expand...
Click to collapse
Ummmm.....Please install a fake phone checker or something because there is no S20 Pro and 'welcome' is usually used in phones bought of fake stores.
Would you please send me screenshots of the settings app and other UI elements? I would like to tell if you've gotten yourself/your parents have gotten you a fake device.
Sent from my SM-G988B using XDA Labs
Related
Disclaimer:
This package is for the Sprint Galaxy S5 (SM-G900P) only. Your device, your responsibility - not ours.
Do not flash this if you do not know what you are doing or have any doubts/concerns about doing something unofficial.
This is a test build so understand YMMV and any use of this is at your own risk without official support available.
Credits:
Anonymous Sources (for providing and verifying the leak's validity)
@Chainfire (CFAR Prep & Testing Coordination - See post #2)
Rwilco12 (Hosting)
Samsung/Sprint (for hopefully not coming after anyone for this leak!)
This is a test build for the Sprint S5. This will not be the OTA release and may have issues.
Nevertheless... it is Lollipop.
I've tested calls, SMS and other functions and they seem to work.
I have not tested all of the sensors and their functions.
I'm also releasing this as a full restore only so it will wipe data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link to build:
Full Restore Tar (in self extracting EXE) - Rwilco12
MD5 Checksum: 58cb28a69b14f0bbfe82b590301cb416
Steps to Flash:
1) Place phone in download mode.
2) Open Odin (I tested using 3.04 and 3.07)
3) Extract tar.md5 file and select in PDA slot.
4) Start Flash and wait for process to complete. (You will see 2 reboots in the process)
Additional notes and links provided in Post #2.
Root Information & Other Notes
Rooting Information
Thanks to Chainfire's assistance a CF Auto Root package is available for this build.
You can download it by clicking here.
During testing SuperSU did not pick up that it stuck properly initially.
After KNOX started throwing the warnings it finally settled in. So you may need to play with it to get it to work.
This will likely be the case until an official Lollipop build is released so again, you're warned in advance.
Other Notes:
I cannot stress this enough - these sources took a very significant risk in providing this to the public and helping verify it.
And while we're thankful for it, this is the only 5.0 leak I will post prior to an official release.
Let's not get greedy and let's not get these sources in trouble.
Reserved
This post is reserved for possible future use.
Wow, very nice release dude!
You also have this for SM-G900F?
Really want the new touchwiz thing to try a few of my apps out!
Awesome
encryptie said:
Wow, very nice release dude!
You also have this for SM-G900F?
Really want the new touchwiz thing to try a few of my apps out!
Click to expand...
Click to collapse
Unfortunately this is only US carrier... I think that for international version there is by wait again more....
Mario9662 said:
Unfortunately this is only US carrier... I think that for international version there is by wait again more....
Click to expand...
Click to collapse
Hoping someone is going to port this to sm-g900f or someone leaks a firm for the g900f
encryptie said:
Hoping someone is going to port this to sm-g900f or someone leaks a firm for the g900f
Click to expand...
Click to collapse
I hope with all my heart.....
Can someone who flashes this please post links to the SystemUI, framework, twframework, settings, contacts and dialer so that I can use them for my theme?
Thanks in Advance
I like to be on the leading edge, bleeding edge I'm a little leery of. Thank you to everyone involved with this. I cannot wait to hear if everything is working, or what is broke, this community is awesome!
Damn, waiting for G900T
@garwynn Any idea on how to deodex Lollipop apk?
Well Sammobile linked you up, so this is going to catch fire pretty quickly in the news as it'll get regurged by Android Central, AP, etc. I hope that doesn't put any pressure on your sources.
Thanks again. Was on ND4 stock, Used odin 3.09 to load this rom. So far so good. Too much white, though. Still testing stuff.
Is there anything of the new Samsung stuff included like theme choser or flow?
theoretically this version should work on international version also... both P &F have the same specs only diference from what is see is GSM bands...
Can someone upload the notocoloremoji font?
Mass reply:
smalldookie said:
Is there anything of the new Samsung stuff included like theme choser or flow?
Click to expand...
Click to collapse
Haven't tested and I'm using my last days with my spare S5 to work on AOSP projects using these blobs.
mmark27 said:
Well Sammobile linked you up, so this is going to catch fire pretty quickly in the news as it'll get regurged by Android Central, AP, etc. I hope that doesn't put any pressure on your sources.
Click to expand...
Click to collapse
Let's hope. But this is again why I said I won't support another public leak even if a source provides it. It's in the best interest of all involved.
Albe95 said:
@garwynn Any idea on how to deodex Lollipop apk?
Click to expand...
Click to collapse
Sadly no, but sure someone will be working on it soon.
Phone_Guru said:
Can someone who flashes this please post links to the SystemUI, framework, twframework, settings, contacts and dialer so that I can use them for my theme?
Thanks in Advance
Click to expand...
Click to collapse
You could get all the tools to extract these from the system.img even on Windows. simg2img is available in a jar executable, 7-zip and DiskInternals Linux Reader to open/pull the files.
encryptie said:
Hoping someone is going to port this to sm-g900f or someone leaks a firm for the g900f
Click to expand...
Click to collapse
encryptie said:
Wow, very nice release dude! You also have this for SM-G900F? Really want the new touchwiz thing to try a few of my apps out!
Click to expand...
Click to collapse
Sadly no, and word via sources is that Samsung is clamping down security. The attention this will attract will probably only tighten that grip.
My guess is the rom would work but you would have no data, modems are different.
rhadee said:
theoretically this version should work on international version also... both P &F have the same specs only diference from what is see is GSM bands...
Click to expand...
Click to collapse
rhadee said:
theoretically this version should work on international version also... both P &F have the same specs only diference from what is see is GSM bands...
Click to expand...
Click to collapse
There are some other h/w differences as we learned during CM bringup.
The ROM itself could probably run on other variants but would have dialer and a few other issues.
Someone may find a way to bring it to the other devices. Where there's a will, there's a way.
Foreword：
This ROM based on Flyme open source project, based on cm12.1， thanks Flyme open source project, thanks nehz .
Presentation：
ROMER：ycjeson
Android version：FlymeOS5（5.1.1）
Updated：2016-07-21
Available device：Redmi3（2GB+16GB no fingerprint）
Flyme open source project:https://github.com/FlymeOS
Based on ROM:http://forum.xda-developers.com/redmi-3/development/rom-cm-12-1-t3368623
Description：
2016.7.21
Update to FlymeOS5.1.7.8R
2016.6.23
Update to FlymeOS5.1.6.20R
Fix music updates after the FC
Fix mobile phone housekeeper traffic management, mobile phone to speed up the bottom bar block
Fix the problem with the exception of the SIM card to unlock the interface with PIN code
Add stocksettings, support DPI, lights, buttons, the screencolor settings
Update supersu to V2.74
BUG report & about me：
Facebook
Twitter
Google+
Install Method:
Recommend to use King Flasher: http://tfile.kingflasher.com/soft/kingflasher_setup.exe
1. Install King Flasher on your computer and make sure it can access to the internet.
2. Connect your phone to computer with USB cable and open USB debbuging.
How to open USB debbuging: Settings > About device > Tap “BUILD NUMBER” 7 times > Back to Settings > Developer options > Select “USB Debbuging”.
3. Please open King Flasher and choose a ROM you like, then click “Flash”.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Wait for downloading ROM.
5. After the download finished, King Flasher will flash your phone automaticlly. It will take about 5-10 minutes to finish.
6. Your phone will reboot to the new system when it finish.
my sofa！
whatsapp still fc?
Maybe some mirror? cant download this file... it lose connection after a few minutes.
@ycjeson: Can I mirror the ROM on Google Drive?
axxx007xxxz said:
@ycjeson: Can I mirror the ROM on Google Drive?
Click to expand...
Click to collapse
okay，thank you very much，i not mirror the ROM on Google Drive。
Hi,
Everything works fine on this ROM ? What about support for Redmi 3 Pro ? Do you plan to make it compatible with this device ?
Because MIUI is good but some "essential" features such as using only one finger to expand notifications are missing. And is there more available RAM than in MIUI ?
Thank you
thomasbh said:
Hi,
Everything works fine on this ROM ? What about support for Redmi 3 Pro ? Do you plan to make it compatible with this device ?
Because MIUI is good but some "essential" features such as using only one finger to expand notifications are missing. And is there more available RAM than in MIUI ?
Thank you
Click to expand...
Click to collapse
I doubt the fingerprint will work in this rom, since it's based on cm
ycjeson said:
okay，thank you very much，i not mirror the ROM on Google Drive。
Click to expand...
Click to collapse
Here you are the mirror: https://drive.google.com/file/d/0B4ryT_zqtaHWMGR6TFdMVUZpejg/view?usp=sharing.
wanted flyme rom for redmi 3 pro
I want flyme rom for redmi 3 pro(3G/32G with finger print). So where can i get? can you help me, please?
Can you please make a build without chines craps? I like this Flyme but chinese kill my eyes and nerves
What are the known bugs? my device is Redmi 3
OdSazib said:
Can you please make a build without chines craps? I like this Flyme but chinese kill my eyes and nerves
Click to expand...
Click to collapse
If you don't like Chinese, maybe you shouldn't buy a Chinese phone made for the Chinese domestic market and install a Chinese custom ROM on it.
bloodvayne said:
If you don't like Chinese, maybe you shouldn't buy a Chinese phone made for the Chinese domestic market and install a Chinese custom ROM on it.
Click to expand...
Click to collapse
thanks reply
Then who cares about your rom
ycjeson said:
thanks reply
Click to expand...
Click to collapse
OdSazib said:
Then who cares about your rom
Click to expand...
Click to collapse
What's the big deal about a few extra chinese apps? Just delete them using TiBu or any other app.
davtse said:
What's the big deal about a few extra chinese apps? Just delete them using TiBu or any other app.
Click to expand...
Click to collapse
But need to omit all chines from weather app, theme, settings and so on. Why should I see Chinese when I set english language? Look at xiaomi.eu rom, those are perfect
OdSazib said:
But need to omit all chines from weather app, theme, settings and so on. Why should I see Chinese when I set english language? Look at xiaomi.eu rom, those are perfect
Click to expand...
Click to collapse
Wait isn't xiaomi.eu an official ROM? You're comparing apples and oranges if so. Right now you're asking for features(or lack thereof) that the developer has absolutely no obligation to oblige. So ask nicely, if he agrees, good, if he doesn't, either learn to live with it or move on. No need for any nasty retorts.
Wut! xiaomi.eu obviously unofficial.
I just requested him to look chinese language to be ommited and didn't find any answer in good way. Some one replied me to prove that I did mistake buying chines manufacturer phone and op supported him without posting a reliable reply wether he's able to do or not.
Don't interact always to irrelevant person or topic on where are you not called to do so.
davtse said:
Wait isn't xiaomi.eu an official ROM? You're comparing apples and oranges if so. Right now you're asking for features(or lack thereof) that the developer has absolutely no obligation to oblige. So ask nicely, if he agrees, good, if he doesn't, either learn to live with it or move on. No need for any nasty retorts.
Click to expand...
Click to collapse
OdSazib said:
Wut! xiaomi.eu obviously unofficial.
I just requested him to look chinese language to be ommited and didn't find any answer in good way. Some one replied me to prove that I did mistake buying chines manufacturer phone and op supported him without posting a reliable reply wether he's able to do or not.
Don't interact always to irrelevant person or topic on where are you not called to do so.
Click to expand...
Click to collapse
This is a public forum. This forum was made for interaction. You are, however, right to say that you are irrelevant, especially in this topic since you've already had your reply. In case you can't read into subtleties, the answer to your "request" is no, he will not omit Chinese language. This is understandable because the OP's main language is probably Chinese, and he may lack the translated material required to accede to your request. I am effectively bilingual and would have offered to try help with that. But since you put it so nicely(as you also did in your request to the OP), thanks but no thanks. Stick to xiaomi.eu ROMs or make your own, if you are so capable.
OP as a long time XDA user I apologise for my fellow user's rudeness. He doesn't appear to understand that your efforts are unpaid for and probably a solo effort.
Hi for everyone!
I have been looking for custom rom for our Motorola Edge +. But I haven't found any yet. However there is the option of the GSI rom's, this smartphone has an A / B system partition. 64-bit ARM CPU architecture. (information obtained with the "Treble Check" app)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I found some roms of this type, like the MIUI 12 GSI but I have not been able to test it because it is my only smartphone and I would need to be doing tests and checking stability.
Has anyone tried GSI roms?
Regards.
I've also been wondering if this is possible, let me know if you get any news on it.
I tried to flash a vanilla GSI Rom via TWRP, and it failed. I wanted to install the image to partition 'System', which isn't there. don't know if it has to do with the custom twrp that I used.
Got it working. after unlocking the bootloader I downloaded a GSI Android 10 ROM from here:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1) booted into the bootloader ('adb reboot bootloader' if your phone is in debug mode)
2) started fastbootd by typing fastboot reboot fastbootd
3) flashed the gsi image: fastboot flash system system-quack-arm64-vanilla.img
4) phone booted and said it couldn't find an image. chose for the option 'erasa /data' and voila.
not sure what is working and what is not working. probably will try some other gsi images later.
Hansaplast31 said:
Got it working. after unlocking the bootloader I downloaded a GSI Android 10 ROM from here:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1) booted into the bootloader ('adb reboot bootloader' if your phone is in debug mode)
2) started fastbootd by typing fastboot reboot fastbootd
3) flashed the gsi image: fastboot flash system system-quack-arm64-vanilla.img
4) phone booted and said it couldn't find an image. chose for the option 'erasa /data' and voila.
not sure what is working and what is not working. probably will try some other gsi images later.
Click to expand...
Click to collapse
This is great news! When you try some other roms try some android 11 ones. Interested if these work aswell.
iiiSpace said:
This is great news! When you try some other roms try some android 11 ones. Interested if these work aswell.
Click to expand...
Click to collapse
Well, I installed a Lineage 17.1 (Android 10) GSI rom. my goal now is not to get Android 11 running, but to get the phone running with some more Motorola functionality. I installed microg and hope at the end to have a useable phone. don't care if it is Android 10 or 11.
Anyone an idea how to get the motosignature library installed on a GSI image? it appears to be quite essential when one wants to take advantage of the motorola edge+ hardware
Hansaplast31 said:
Anyone an idea how to get the motosignature library installed on a GSI image? it appears to be quite essential when one wants to take advantage of the motorola edge+ hardware
Click to expand...
Click to collapse
Maybe this?
I can't seem to get them to flash. They always throw up an error when writing system, fails at the end.
Did you unlock your bootloader?
How To Unlock Bootloader And Root Motorola Edge Plus
Share on Facebook Tweet it Share on Reddit Pin it BUY NOW Motorola has enhanced its devices, and in itsContinue Reading
www.theworldsbestandworst.com
Hansaplast31 said:
Well, I installed a Lineage 17.1 (Android 10) GSI rom. my goal now is not to get Android 11 running, but to get the phone running with some more Motorola functionality. I installed microg and hope at the end to have a useable phone. don't care if it is Android 10 or 11.
Click to expand...
Click to collapse
Hello, how was your Motorola Moto Edge Plus? I'm thinking of putting ROM CUSTOM because of the facial recognition that Motorola excluded from the ROM STOCK.
I'm sorry for the language, I'm translating with google translator
carla l marques said:
Hello, how was your Motorola Moto Edge Plus? I'm thinking of putting ROM CUSTOM because of the facial recognition that Motorola excluded from the ROM STOCK.
I'm sorry for the language, I'm translating with google translator
Click to expand...
Click to collapse
The sole purpose of buying an Android phone for me was to degoogle it. (Unfortunately you cannot de-apple an iPhone). What I feel about the Motorola Edge? its a phone and it works, its a premium feel phone, but it isn't an iPhone (sorry imho iPhones have been and always will be the better, more complete phone). To achieve having a degoogled phone: I gave up on going down the road of loading a GSI and missing all kinds of proprietary/custom features of the devices. Instead I went back to de stock rom and degoogled and debloated it. I am happy now to run microG, Aurora Play Store and other things to spoof my identity / location / contact tracing. And I am happy to feel that I am not playing the game of big tech anymore. For as long that its possible.
Hansaplast31 said:
Did you unlock your bootloader?
How To Unlock Bootloader And Root Motorola Edge Plus
Share on Facebook Tweet it Share on Reddit Pin it BUY NOW Motorola has enhanced its devices, and in itsContinue Reading
www.theworldsbestandworst.com
Click to expand...
Click to collapse
lol yes. Still for some reason failing. I wonder if it is the version of adb I'm using or the GSIs themselves?
Got it! I needed a newer fastboot version. Running like a charm now
@crixley @Hansaplast31
Could you possibly let us know what gsi you used and what files you flashed to make your device function? Also a step by step?
I really would like a step by step too if it's possible please!
I have posted a tutorial on how to flash GSI. I got lineageos 18 working but without VoLTE or Display over USB. I don't think there is a custom rom with Display over USB though.
Tutorial
https://forum.xda-developers.com/t/guide-how-to-flash-android-11-gsi-on-moto-edge.4347359/
Hansaplast31 said:
The sole purpose of buying an Android phone for me was to degoogle it. (Unfortunately you cannot de-apple an iPhone). What I feel about the Motorola Edge? its a phone and it works, its a premium feel phone, but it isn't an iPhone (sorry imho iPhones have been and always will be the better, more complete phone). To achieve having a degoogled phone: I gave up on going down the road of loading a GSI and missing all kinds of proprietary/custom features of the devices. Instead I went back to de stock rom and degoogled and debloated it. I am happy now to run microG, Aurora Play Store and other things to spoof my identity / location / contact tracing. And I am happy to feel that I am not playing the game of big tech anymore. For as long that its possible.
Click to expand...
Click to collapse
How did you get it done to degoogle it and getting microg running using the stock rom? Is it similiar to this proccess https://forum.xda-developers.com/t/guide-degoogle-any-device-and-install-microg.4058743/ ?
I share the same philosphy about buying a phone.
Please post your successsfull root, (Magisk) & Any successfull custom recoveries and or custom ROM's fully running on Google pixel 6 devices. Leggo developers!
The question is, why would you want a bloated rom with this great un-bloated device?
Pixels now days come with the best software available.
If you want to customize and root, use Magisk and custom themes.
Hopefully some developers will get these phones in their hands and start working on new ROMs, that's mainly what I'm waiting for to really start enjoying my P6 as well. A big one for me is to de-google the phone and go Lineage/Calyx/Graphene OS.
vandyman said:
The question is, why would you want a bloated rom with this great un-bloated device?
Pixels now days come with the best software available.
If you want to customize and root, use Magisk and custom themes.
Click to expand...
Click to collapse
If by un-bloated you mean lacking any useful options then sure. But personally I want more options, like the ability to assign custom actions to navbar buttons, to hide the statusbar clock without leaving a huge empty space behind, to have PROPER accent colors I can define via HEX code and many many more.
On the other hand an UNbloated device shouldn't come with Gmail, Youtube Music, Google TV, Tags or any other crap preinstalled either, most of which I can't uninstall but only disable.
I can't wait to see what devs unlock with new kernels
Might take a while since Tensor is an unknown, but this would be a great device for Lineage.
LLStarks said:
Might take a while since Tensor is an unknown, but this would be a great device for Lineage.
Click to expand...
Click to collapse
That's alright I expect to wait awhile. I'm excited either way
vandyman said:
The question is, why would you want a bloated rom with this great un-bloated device?
Pixels now days come with the best software available.
If you want to customize and root, use Magisk and custom themes.
Click to expand...
Click to collapse
"great un-bloated device"? Maybe as compared to adding even more bloat from the vendor and carrier, but these are VERY VERY far from bloated. They're disgustingly bloated. More g-spyware than anything I've ever seen.
So why would you want an **UN**-bloated build of AOSP? To get rid of the steaming truckload of dogsh**.
96carboard said:
"great un-bloated device"? Maybe as compared to adding even more bloat from the vendor and carrier, but these are VERY VERY far from bloated. They're disgustingly bloated. More g-spyware than anything I've ever seen.
So why would you want an **UN**-bloated build of AOSP? To get rid of the steaming truckload of dogsh**.
Click to expand...
Click to collapse
You can uninstall or freeze any app you want to. Easy peazy.
I just like having a clean OS with a few minor mods. Oh!, custom kernels are also helpful.
I guess you can call it OCD, after cleaning up people's PCs from all the crap that they installed with no clue on what it really does.
Some people just like installing crap on there phone for what...
Than they go from thread to thread to cry and ask for help because their device has problems.
vandyman said:
You can uninstall or freeze any app you want to. Easy peazy.
I just like having a clean OS with a few minor mods. Oh!, custom kernels are also helpful.
I guess you can call it OCD, after cleaning up people's PCs from all the crap that they installed with no clue on what it really does.
Some people just like installing crap on there phone for what...
Than they go from thread to thread to cry and ask for help because their device has problems.
Click to expand...
Click to collapse
No, you actually can't. Go ahead and try to disable play services and see where that gets you.
96carboard said:
No, you actually can't. Go ahead and try to disable play services and see where that gets you.
Click to expand...
Click to collapse
Google play is whole, different topic in its own.
Some people need it for different reasons than others.
Just like some people need Facebook Twitter, etc. For there life to continue on.
I do not need that kind of bloat ware in my life.
96carboard said:
No, you actually can't. Go ahead and try to disable play services and see where that gets you.
Click to expand...
Click to collapse
I've been using Android devices without Google Play Services by following this excellent guide on all my devices. I'm waiting for my Pixel 6 and will have a go. Not sure if it will work on Android 12, but will have go. In any case I'll be using Xprivacy Lua & AFwall+ for additional privacy.
[GUIDE] microG - Deodex - Signature Spoofing - Debloat Gapps!
microG I am no longer working on this, or updating any information here! This was created back in the day of Oreo. I've personally moved on and I'm presently using /e/ which you can see the info here and get the ROM for OP5T. /e/OS...
forum.xda-developers.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you follow the aosp build guide you can build aosp pure for pixel 6 ...
Im currently trying to build a custom recovery for pixel 6 before i release pure aosp or any other aosp build.
If your wonder why the kernel says september its because i was using it for magisk root.
Please lmk if find a creation build that's successful for recovery please thanks and good luck to you mate. Enjoy your P6!
allenjthomsen said:
View attachment 5451057
If you follow the aosp build guide you can build aosp pure for pixel 6 ...
Im currently trying to build a custom recovery for pixel 6 before i release pure aosp or any other aosp build.
If your wonder why the kernel says september its because i was using it for magisk root.
Click to expand...
Click to collapse
Yes please keep us updated
With the latest update to the 37 firmware i currently have not been able to get a booting build working without gapps or gapps .
I get a build that boots but it reboots at random for both builds i am currently working to fix the issue and once i do i will be releasing both.
Shannonims restart loop? Set selinux permissive for now if you haven't already.
Proton AOSP early release
Just got my Pixel 6 today, can't wait for GrapheneOS been using it on my Pixel 4a forever. Looks like Pixel 6 support is underway.
gapps version is finally booting and i know why this error is there i need to swap from the current gapps im using to another one but i am closer to non bootlooping builds now since i fixed my issue in my source . i will have a non gapps version coming out sooner for those that dont want to use gapps it will not have spoofing at first i will add that later on.
This device finally seems like a worthy buy if one wants to go into the Samsung ridden 4nm fabrication 8 gen 1 CPU. Best temperatures and lowest throttling of all phones with that chip.
One can only hope if Realme releases it with an unlocked bootloader right at launch for it to get a proper aftermarket dev support.
Well, I am planning to consider a Realme smartphone, GT2 Pro is looking really a great phone, but unlocking bootloader and rooting is mandatory to me and i really don't know what to do.....
I guess on realme phones is not easy like xiaomi / google devices doing that. At last unlocking the bootloader could be easy but how is difficult to find official ROM updates in order to patch the boot image to install magisk?
Honestly after years with OnePlus I needed a change of pace, and this Realme catched my interest, same doubt of others, I'm using Magisk and root privilegies for small thing that probably won't hurt my experience, but I'd like to have the possibility to unlock the bootloader and install/modify things in order to get a better experience.
Let's cross fingers and hope for some developments, probably I'm going to buy it at or close to launch for the early bid discount.
Killua96 said:
Honestly after years with OnePlus I needed a change of pace, and this Realme catched my interest, same doubt of others, I'm using Magisk and root privilegies for small thing that probably won't hurt my experience, but I'd like to have the possibility to unlock the bootloader and install/modify things in order to get a better experience.
Let's cross fingers and hope for some developments, probably I'm going to buy it at or close to launch for the early bid discount.
Click to expand...
Click to collapse
Global Realme are nearly impossible to be unlocked, that is why i asked.....
This promising to be a very good phone, but xiaomi is always the 1st choice for people who need the phone to be unlocked......
It should be possible to convert the Chinese version which I have to the Global one. It's been possible on previous GT series.
wildlime said:
It should be possible to convert the Chinese version which I have to the Global one. It's been possible on previous GT series.
Click to expand...
Click to collapse
But you need to unlock the bootloader.....
I hope it only take a while to be unlocked.... I've bought the chinese version. Ok it work fine, only some features here and there that give me some trouble, like not work "ok google" but instead there is this Breeno app that I absolute hate and other minor annoying things. For the rest its a very premium phone.
I hope someone with the EU/Global version will tell us something soon.
For mnow I have debloated all chinese apk and unuseful apps from ADB command (can't with Breeno main app, the search bar, market and whatsoever all gone), work fine, but the Google services doesn't work at their best. Wait for EU/global indication (if possible)
Fentadroid said:
I hope someone with the EU/Global version will tell us something soon.
Click to expand...
Click to collapse
Dunno how the situation is in other country, but here in Italy Realme made some really bad moves.
The 100€ discount for the early bids became a 50€ discount for the 8/128 and a pair of buds for 12/256 (official site), on amazon IT the discount is right but it's available at the end of march.
So... I thing I'll keep my OnePlus 7T and wait
Killua96 said:
Dunno how the situation is in other country, but here in Italy Realme made some really bad moves.
The 100€ discount for the early bids became a 50€ discount for the 8/128 and a pair of buds for 12/256 (official site), on amazon IT the discount is right but it's available at the end of march.
So... I thing I'll keep my OnePlus 7T and wait
Click to expand...
Click to collapse
Well... I'm from Italy too....
Interested in the 12/256 version.
Used for a while the EU version of this phone thanks to a reviewer who gave me it for a day.
All I can say, it's a good phone with some bugs. Pictures are really great.
The problem is unlocking bootloader and installing magisk is mandatory to me and I already know that with Realme it's not easy as Xiaomi or Oneplus..... (Updates etc etc...).
So... let's see what will happen..... (including wating for the Xiaomi 12 Ultra too...)
I'm really planning to get this phone. Hopefully we'll see bootloader unlocking and custom ROM development on it.
So how do we know if it’s unlockable?
I have the global GT 2 Pro, in the DEV OPs „Unlock OEM“ is available
You can try to enable developer option, then enable OEM Unlock and USB debugging.
Then you can try to search and download the app Depth Testing 1.1.0 and try to apply.
If that app works, you can reboot to bootloader and type
Code:
fastboot flashing unlock
Note that your phone will be wiped and all will be erased.....
That is the main problem of Realme phones, unlocking bootloader must be approved......
Fentadroid said:
You can try to enable developer option, then enable OEM Unlock and USB debugging.
Then you can try to search and download the app Depth Testing 1.1.0 and try to apply.
If that app works, you can reboot to bootloader and type
Code:
fastboot flashing unlock
Note that your phone will be wiped and all will be erased.....
That is the main problem of Realme phones, unlocking bootloader must be approved......
Click to expand...
Click to collapse
Hi any link for the app Depth Testing 1.1.0 please ? I can't find any official link on realme website.
lutherkingmartin said:
Hi any link for the app Depth Testing 1.1.0 please ? I can't find any official link on realme website.
Click to expand...
Click to collapse
You won't find any official link on realme website....
Depth Testing APK (Android App) - Free Download
Download: Depth Testing APK (App) - Deep testing APK - ✔ Latest Version: 1.1.0 - Updated: 2023 - com.coloros.deeptesting - Free - Mobile App for Android
apkcombo.com
Fentadroid said:
You won't find any official link on realme website....
Depth Testing APK (Android App) - Free Download
Download: Depth Testing APK (App) - Deep testing APK - ✔ Latest Version: 1.1.0 - Updated: 2023 - com.coloros.deeptesting - Free - Mobile App for Android
apkcombo.com
Click to expand...
Click to collapse
thank you I'll test it when I'll receive my Phone.
lutherkingmartin said:
thank you I'll test it when I'll receive my Phone.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried it but no luck...
Same here. Looks they locked the app out.
Can we able to unlock the bootloader in the future? Or realme won't give us the permission?