[ROM+TWRP] LineageOS 17.1 + MicroG/Gapps Support 14.01.2021 - OnePlus X Android Development

Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What's working:
Boots
RIL (Calls, SMS, Data)
WiFi
Bluetooth
Audio
Video Playback
Sensors
Flashlight
GPS
Notification Slider
Off screen gestures
Camera
Known issues:
You tell me.
Features:-
-4k video recording
-Signature Spoofing support for MicroG
FAQ
Q What is MicroG?
A https://lineage.microg.org/
Q Playstore error RH-01
A Delete google account and recreate it.
Q Error 7 in twrp
A Get TWRP from Download section
Q Where is MicroG flashable zip?
A https://downloads.nanolx.org/NanoDroid/Stable/ - Download the file NanoDroid-microG-xxxxxx.zip and flash from TWRP.
Q Permission problem in MicroG?
A visit https://shadow53.com/android/no-gapps/faq/playstore-incorrect-signature/
Downloads:
LOS 17.1
Recovery - TWRP 3.2.3 14.02.2019
Flash Instructions:
1. wipe /data /system /dalvik /cache
2. flash rom
NOTE:-
-Clean flash only.
-Backup important data before flashing
Special Thanks
@lineageos
@Marado
XDA:DevDB Information
LineageOS 17.1, ROM for the OnePlus X
Contributors
psychem, yumemichi
Source Code: https://github.com/YumeMichi/device_oneplus_onyx
https://github.com/YumeMichi/kernel_oneplus_onyx
https://github.com/YumeMichi/proprietory_vendor_oneplus
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2020-06-07
Created 2020-06-11
Last Updated 2021-08-08

Changelog
14.01.2021 build
security patch update
15.09.2020 build
updated security patch - September
updated kernel sources
12.08.2020 build
updated security patch - August
updated kernel sources
25.07.2020 build
updated security patch - July
updated kernel sources
Initial release
June Security patch

Reserved

Hi @psychem,
Thank you for the LOS 17.1 update. When I clicked on the LOS 17.1 download link, I was asked to request for access to google drive. (Kindly refer to the attached snapshot)

absolut_zero said:
Hi @psychem,
Thank you for the LOS 17.1 update. When I clicked on the LOS 17.1 download link, I was asked to request for access to google drive. (Kindly refer to the attached snapshot)
Click to expand...
Click to collapse
Initially it is download on request.

Dear OP,
Is this development really status stable?
Other LOS 17 show as beta?

Mr Raven said:
Dear OP,
Is this development really status stable?
Other LOS 17 show as beta?
Click to expand...
Click to collapse
lot of people have downloaded it already, it is better if they give their view.

psychem said:
lot of people have downloaded it already, it is better if they give their view.
Click to expand...
Click to collapse
Very few of us are left. We are a rare breed.

av2032 said:
Very few of us are left. We are a rare breed.
Click to expand...
Click to collapse
Rare indeed

I intend to test but my weekends fly away

Flashed it yesterday and so far there are no problems.
It is really smooth and it feels great.
Thanks a lot for that awesome build

psychem said:
lot of people have downloaded it already, it is better if they give their view.
Click to expand...
Click to collapse
Been testing it for 3 weeks now. So far so good. Running rooted on an encypted partition, smooth and no bugs to report. But I don't make extensive use of my phone, so your mileage may vary.

Hello,
After flashing your build I've encountered the same bug as the one initially on Yume's LOS 17.1 : date & time resetting after every reboot. Any chance to fix that ?
EDIT : https://forum.xda-developers.com/showpost.php?p=82725973&postcount=363

New build is up

AndroidAuto is working with this rom?

HTML:
psychem said:
New build is up
Click to expand...
Click to collapse
Thanks a lot, revived my old opx with your ROM!

Hello,
Am I the only one who have a phone with high temperature when I use it ? Even with Whatsapp or photo apps. Not only with games.
This is really really hot !
Battery at 42°C when I use any app (Whatsapp, Chrome/ Edge, etc). That's super hot !!

Great job for this release, I have just a little bug with galery but I have flashed Open Gapps version ARM Pico because I just need Google Play (ok I use Youtube, Gmail and Maps).
However this release is better than Lineage OS 14.1 official. I have tested Adaway in stable release v4.k and v5 in beta with root magisk 20.4 but after that I have bug with camera or camera MX so for the moment I prefer use without root
Thx for this work, the Oneplus X is a good smartphone and small

New build is up!

psychem said:
New build is up!
Click to expand...
Click to collapse
Thank you for keeping OnePlus X updated !
1/ Is it possible to have this update by OTA ?
2/ Is it possible to flash this rom without cleaning the phone ?

Related

CAF-6.0.1 [Alpha] [Surnia]

Hi All,
I've been working on a CAF version for osprey. This is started from kernel and device tree made by Alberto97 and Squid2, so thanks a lot to them for the bringup.
This version is very early and should only be flashed by people who know what they are doing. Flash this at your own risk.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
For now only a few things are working:
Working
Bluetooth
SMS/RIL
Sound
Camera
Not work
Binaries
Here
Sources
https://github.com/boulzordev/local_manifests/tree/caf-6.0
XDA:DevDB Information
CAF-6.0 [Surnia], ROM for the Moto E 2015
Contributors
scritch007, squid2, Alberto97
Source Code: git://codeaurora.org/platform/manifest.git
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: CAF
Version Information
Status: Testing
Created 2015-11-16
Last Updated 2016-01-04
Changelog
surnia-caf-87.zip
Updated to latest version of CM13 device specific + CM13 kernel)
Updated to LA.BR.1.2.7-00910-8x09.0.xml (February security patch)
Fixed the ringtone setting issue
Using frameworks_av from CM13 from now on.
surnia-caf-86.zip
Only tested on my Osprey and Lux, so still in testing folder
Fix setting ringtone
Fix invalid number error when the call is ended by the other end
Sepolicy from cm imported (getting ready for Sepolicy being enabled)
surnia-caf-85.zip
Settings for light management ( When opening settings values reset to default)
Dual sims outgoing should be fine now
Updated frameworks_av with CM commits
Now building osprey/lux/surnia at the same time, this is why the version is 85
Backup script when flashing in recovery. This works with open gapps. This means gapps are copied and restored when flashing
surnia-caf-0.10.zip
Dual sim outgoing calls/sms fixed (tested on Lux). Thanks to @Men_in_black007 for pointing out the missing commit
Fixed exfat external storage
MM bootanimation added. thanks to This thread
surnia-caf-0.9.zip
Updated to 6.0.1
Now using commonized msm8916 like cm13 will do
Using libshim from cm for the missing symbols
There is a bug the initial bootanimation doesn't seem to load. But it loads once rom is started and optimising applications.
surnia-caf-0.7.zip
Didn't have time to test it
The google webview
"Maybe the reboot option"
The time.sleep for the camera3 application that was posted somewhere in here
Let's hope exfat sdcard working too
surnia-caf-0.6.zip
Dual sim support (Reported OK)
Fix an issue with wifi bootloop after installing gapps (Can't really tell the trigger, but it's fixed )
surnia-caf-0.5.zip
Sdcard is now mounted and can be mounted in mtp. Still some issues about the state in the getprop and so on, but data are accessible
Fixed the OEM unlocked button issue.
surnia-caf-0.4.zip
Video Recorded can be viewed
Change Language doesn't crash anymore when accessing to phone config (if I missed some languages please tell me I'll fix them too)
surnia-caf-0.3.zip
Initial version
ohhh I'm glad to be working on 6.0 for our Surnia. Keep up the good work, thank you.:victory:
nice job?thanks
Wow thanks bro!
good work
Any specific recommended gapps? I get force closes and play service errors from open gapps.
This ROM will support Dual Sim Surnia versions like unified cm12.1?
starkly_raving said:
Any specific recommended gapps? I get force closes and play service errors from open gapps.
Click to expand...
Click to collapse
The ROM has to have a patch to support gapps now. It says so on their website when you click 6.0.
cmason37 said:
The ROM has to have a patch to support gapps now. It says so on their website when you click 6.0.
Click to expand...
Click to collapse
@scritch007 we need this commit for gapps to work on CAF/AOSP...its already upstream in CM13...
https://github.com/TeamExodus/frameworks_base/commit/9c36be651e83fb039a262682839bd920b033007a
I tested on a XT1527, and it works incredibly good only there's two issues:
1)When switching from wifi to Mobile Network (i think after a data connection, i don't know exactly) the phone freezes up, and after it shutdown to bootlogo. (i will try to provide you a logcat)
2)The mobile network doesn't work, i think so, the google search didn't response
Anyways, it's an incredible work, and keep it going! Thanks for porting Android 6.0 to our device
Wow, just tested, & everything pretty much works. The only bugs are gapps, SD Card, & the occasional random reboot. Everything else, including 4G, worked. I tested all the apps, & sideloaded chrome to test browsing/video. Once we get the gapps & SD Card fixed, it's pretty much daily driver material. Thanks, @scritch007!
starkly_raving said:
@scritch007 we need this commit for gapps to work on CAF/AOSP...its already upstream in CM13...
https://github.com/TeamExodus/frameworks_base/commit/9c36be651e83fb039a262682839bd920b033007a
Click to expand...
Click to collapse
This is already there https://github.com/boulzordev/android_frameworks_base/commits/caf-6.0
But thanks for looking into it .
@all look at the Moto G 2015 thread, some of the errors/solutions are already posted there.
RIL seems to be broken in my X1521...sim card isn't getting detected
Just tried this on my XT1521... no RIL because this is dual SIM, and no microSD, but nonetheless, great work! The ROM was extremely fluid in the few moments I used it, and fixing those issues, I would have no issues in using it as a daily driver.
scritch007 said:
This is already there https://github.com/boulzordev/android_frameworks_base/commits/caf-6.0
But thanks for looking into it .
@all look at the Moto G 2015 thread, some of the errors/solutions are already posted there.
Click to expand...
Click to collapse
It seems that the issue is actually WebView. When opengapps installs, it installs Google Webview, and since this ROM is still configured to use AOSP WebView, it doesn't work. @scritch007 you actually need this commit.
surnia-caf-0.4.zip
Video Recorded can be viewed
Change Language doesn't crash anymore when accessing to phone config (if I missed some languages please tell me I'll fix them too)
@NSDCars5 thanks updated the change log. It was taken from osprey, which didn't get previous version
@scritch007
Video recording worked fine in the last build too, I just couldn't see the recorded video in Marshmallow (in Lollipop I could see what I'd recorded in Marshmallow). So does this mean we can see recorded video in the ROM itself?
Question
scritch007 said:
surnia-caf-0.4.zip
Video Recording
Change Language doesn't crash anymore when accessing to phone config (if I missed some languages please tell me I'll fix them too)
Click to expand...
Click to collapse
When you say SD doesn't work, you mean it doesn't recognize it at all? Or is it only a minor issue? Just wondering.
Sorry for the question but on XT1524 works this?

[ROM][5.1.1][SM-G531H/BT]CyanogenMod 12.1 for Samsung Galaxy Grand Prime VE

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working?
Wifi (connection, tethering, etc)
Bluetooth
RIL (SMS, Mobile data, Calls) [dual-SIM]
Camera
Video codecs
Storage (both internal and external)
MTP storage (both internal and external)
zRAM (compressed-RAM swap)
GAPPS
USB OTG
Tethering (USB, Wifi, Bluetooth)
Sound recording
Torch (flashlight)
BUGS/Not working:
Weird sound when using loud speaker while calling
GPS doesn't work
Recorded videos through camera produces wrong color
Offline charging doesn't work
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy Grand Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
MULTITASKING TEST:
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
ALPHA-2: Link
ALPHA-3: Link
BETA-1: Link
Want some screenies? Get them from Screenshot tab
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Grand Prime
Contributors
doesntexits
Source Code: https://github.com/koquantam/android_device_samsung_grandprimeve3g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2016-10-10
Created 2016-09-28
Last Updated 2016-10-11
F.A.Q
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G531BT
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can i use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
CHANGELOG
ALPHA-1: Initial release
ALPHA-2: Post #21
ALPHA-3: Post #62
BETA-1: Post #145
I test it and repoet
Sent from my SM-G531H using Tapatalk
@doesntexits I test it
worked perfectly
please fix wifi bug please please
Sent from my SM-G531H using Tapatalk
tanks
Already it has much time with bugs such those of the first generation and has two stable cm 13 and up wing cm 14 (even with bugs) nosotro any and cm 12.1 faulty even: / good play wait thanks for keep working on it
mamadrahimi8 said:
@doesntexits I test it
worked perfectly
please fix wifi bug please please
Click to expand...
Click to collapse
Does mobile data work ?
ciel phantomhive said:
Does mobile data work ?
Click to expand...
Click to collapse
yes
Sent from my SM-G531H using Tapatalk
@doesntexits please build a wifi fixer.zip and upload it or build a kernel with wifi working
Sent from my SM-G531H using Tapatalk
Installed, it worked but is not receiving calls, making only, GPS is working, these bugs were that I realized ... porfavor send an update corigindo them ... You did an excellent job.
It all worked eagerly await the fix. We here at Brazil like almost all the group settled and quite bothered the bug wifi. beautiful work
Thank you!
I would like that this model don't forget, I think that is so injust that "all" roms will be designed for grand prime g530h. I think that this comunity is for all, and would like that more roms will be avaliable for this terminal. Sorry, I don't speak english very well.
Wow finally a rom for SM-G531H..... Gonna test it on my device. Good work bro :victory:
It seems that I cant receive call. Auto rotate also won't work.
naimrlet said:
It seems that I cant receive call. Auto rotate also won't work.
Click to expand...
Click to collapse
Yes, and they're all mentioned in OP buglist
doesntexits said:
Yes, and they're all mentioned in OP buglist
Click to expand...
Click to collapse
Opps I didnt read the post correctly. Sorry :silly:
Work or Not ?
Someone sent me this
plz fix bootloop on restartng issue soon
@doesntexits please fix wifi bug
Sent from my SM-G531H using Tapatalk
mamadrahimi8 said:
@doesntexits please fix wifi bug
Click to expand...
Click to collapse
Don't rush him :highfive:
Hardwork requires time :good:

[ROM][8.1.0][SM-G360H/HU] LineageOS 15.1 for Samsung Galaxy Core Prime

LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
RIL [partially]
WiFi
Bluetooth
HW video codecs
Almost any other hardware stuffs are working properly
BUGS/Not working :
Offline charging doesn't work
Camera [nearly unusable at all]
RIL [crashes while choosing network provider on 3G signal]
[Using STK makes RIL crash also]
WiFi Direct/hotspot doesn't work
First time installing LineageOS 15.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery MUST USE VERSION 3.2.1-0 OR ASSERT ERROR OCCURS
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
[NOTE]:
If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
This is Android Go build, which is "optimized" for devices with lower than 1GB RAM, so don't expect full features like older Android versions [should we need ordinary build also?]
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-2: Drive link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
LineageOS 15.1, ROM for the Samsung Galaxy Core Prime
Contributors
remilia15
Source Code: https://github.com/remilia15?tab=repositories
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.4
Based On: LineageOS
Version Information
Status: Alpha
Created 2018-06-30
Last Updated 2018-07-08
Reserved
Reserved
Pro
Thug
Pro rom sir when android P for sprd ?
Awesome. what a pleasant surprise!
dev_harsh1998 said:
Pro rom sir when android P for sprd ?
Click to expand...
Click to collapse
Already here, but we found it bugless so remilia had to add some bugs to make it fun
thanks for this hard work.....the rom is awsome but the major bug is making calls .....will be any fix soon ??
vahmed2090 said:
thanks for this hard work.....the rom is awsome but the major bug is making calls .....will be any fix soon ??
Click to expand...
Click to collapse
Yeah it will be this is just first alpha
good job the rom is awsome ........ but will be any fix for the calls soon??
Ooohhh weeeee! Oreo is on! Thanks remilia!
vahmed2090 said:
good job the rom is awsome ........ but will be any fix for the calls soon??
Click to expand...
Click to collapse
Remember: asking doesn't make things possible
There will be fixes, but not soon. Probably 69 years later then
Sent from my Xperia Z1 using XDA Labs
remilia15 said:
Remember: asking doesn't make things possible
There will be fixes, but not soon. Probably 69 years later then
Sent from my Xperia Z1 using XDA Labs
Click to expand...
Click to collapse
What is 69 years ? "Bựa quá nha"
tnkhai said:
What is 69 years ? "Bựa quá nha"
Click to expand...
Click to collapse
hi bro
Hi. I tried aosp rild and libril. But rild will crash later. Do you got that?
ngoquang2708 said:
Hi. I tried aosp rild and libril. But rild will crash later. Do you got that?
Click to expand...
Click to collapse
Can I have log?
Sent from my Xperia Z1 using XDA Labs
Wow. Nice ROM, wait update. Thanks!
Cherifiali said:
Already here, but we found it bugless so remilia had to add some bugs to make it fun
Click to expand...
Click to collapse
When will the Oreo rom be available for sm-g361h
ALPHA-2 is up! Changes:
Fixed calls, mobile data switch (thanks to @ngoquang2708)
Updated security patch to 5th July
Fixed video codecs/screen recording
YouTube videos now playable
Download link is updated in OP! Please don't quote this post, as it'll be changed when needed
Buglist is also updated in OP. Please check before you download!

[ROM][SM-P605][9.0] Unofficial LineageOS 16.0 for lt03lte (04.06.2019)

This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
Here some warm pie for our Note 10.1 2014 LTE.
LineageOS (former CyanogenMod) is a free, community built, aftermarket firmware distribution of Android 9 (Pie) , which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.2.1-0 or newer needed)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage 16.0 Zip > Swipe
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.​
What is working
Wifi
Sound
Bluetooth
S-Pen
Off Charging
ADB/MTP
RIL
...
What is not working
Camera
Wifi Hotspot
...
Untested
GPS
IR
...
Bugs/ other things
SELinux Permissive
...
Download
​
Notes:
- TWRP 3.2.1-0 or newer necessary
Changelog:
--Lineage--
20190604: fixed mobile data, many changes and cleanup, added spen pointer...
20181006: fixed RIL, fixed USB MTP, disabled USB host mode, small things
20180825: first test build
Screenshots
Credit: LineageOS Team, Maintainer and Valera1978
Kernel Source
XDA:DevDB Information
[ROM][SM-P605][9.0] Unofficial LineageOS 16.0 for lt03lte (25.08.2018) [TEST], ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 Bootloader/Modem and TWRP 3.2.1-0 or newer
Based On: LineageOS
Version Information
Status: Alpha
Created 2018-08-25
Last Updated 2019-06-04
I saw the new branch on Github and was waiting for this. Huge thank you to you for the continued support of our device!
Edit:
Oh yeah, will try tomorrow!
Hi davidmueller13,
Thank you so much for your passion and keep working for our dying tablet.
I'm sure it will revive this tablet quite useful again.
Looking forward to seeing a wonderfully baked PIE!
Hooray!!!
Thanks a lot for your support to let our loved tablet remain alive !!!!!
Yes!! Thank you so much David!
Yes!! Thank you so much David, greatness for the support and giving new life.
Cool, bummer we don't see love for our P600's as well.
BA_Flash_GOD said:
Cool, bummer we don't see love for our P600's as well.
Click to expand...
Click to collapse
Because it has an Exynos processor.
Thanks Davidmueller for continuing support to our
Note 10.1 2014 LTE.
Mine is a T-Mobile US P-607T and so far has been compatible with all P605 builds.
Would this work on the 2012 edition?
Would this work on the 2012 edition?
No!!
is this usable on p605k?
i have problem getting into twrp in my 605
enriqueyang said:
i have problem getting into twrp in my 605
Click to expand...
Click to collapse
Could you explain which kind of problem you are facing ?
Tilagoon said:
Could you explain which kind of problem you are facing ?
Click to expand...
Click to collapse
i manage to install twrp with odin, however, i can access menu of twrp,
is there other way to flash the firmware without twrp?
enriqueyang said:
i manage to install twrp with odin, however, i can access menu of twrp,
is there other way to flash the firmware without twrp?
Click to expand...
Click to collapse
Have a look here: https://twrp.me/samsung/samsunggalaxynote1012014qcom.html
you will see some alternative ways of installing TWRP
Tilagoon said:
Have a look here: https://twrp.me/samsung/samsunggalaxynote1012014qcom.html
you will see some alternative ways of installing TWRP
Click to expand...
Click to collapse
thank u, will try
Install on my 607, installed ok, gapps installed ok, but there seems to be an issue with the wifi.
I'm unable to see my AP. Other devices connect just fine. I don't use the 4g/LTE sim slot.
*UPDATE 1*
The SSID is not broadcasting, it can see other networks/connect that ARE broadcasting the SSID
*UPDATE 2*
Google is being dumb. I found an additional setting for when adding a hidden wifi network.
Their response (and how to get it to work) is here:
https://productforums.google.com/forum/#!topic/phone-by-google/TAaxC5VPL8A
secretwolf98 said:
Would this work on the 2012 edition?
Click to expand...
Click to collapse
No chance... Can you put a 2014 edition rom on your 2012 edition and have it run?
New build
Changelog:
- fixed RIL
- fixed USB MTP
- disabled USB host mode
- small things
Download

[ROM][UNOFFICIAL][11][EAS][SM-T820][SM-T825][2022-05-08] HavocOS 4.16 for Galaxy Tab S3

Code:
/*
* Your warranty will be VOID after installing a custom ROM.
*
* Get notified yourself that I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it!
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device,
* I will laugh at you.
*/
# HavocOS
Havoc-OS is an after-market firmware based on Android Open Source Project, inspired by Google Pixel with a refined Material Design 2 UI. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.
# What's working
Display/Touchscreen
LiveDisplay
Audio playback
Quad speakers
Headphone/Headset
Bluetooth audio
Video playback
HDR
Camera
Microphone
Sensors
Fingerprint sensor
GPS
LTE (SM-T825)
WiFi
WiFi display
Hotspot
Bluetooth
DRM
Widevine L1
USB ADB/MTP/OTG
Samsung Doze
S-Pen
Palm rejection
SD Card
Power-off mode charging
# What's not working
Some HavocOS features like AppLock
Fast charging
SELinux permissive
Hardware encryption
Please see the "Known issues" part of this post
# Downloads
## HavocOS 4
Galaxy Tab S3 LTE (gts3llte, SM-T825)
Galaxy Tab S3 WiFi (gts3lwifi, SM-T820)
## Google Apps
OpenGApps
NikGApps
BiTGApps
Others may also work but not tested
## TWRP Recovery
You can use mine, please visit this thread.
You can use F2FS file system for cache, data partitions with my TWRP recovery.
[RECOVERY][SM-T820][SM-T825][UNOFFICIAL] TWRP for Galaxy Tab S3
# How to install
Unlock the bootloader.
Download TWRP and flash the recovery image via Odin.
Download HavocOS 4 for Galaxy Tab S3.
Be aware of the board name.
Download GAPPS for Android 11 and the others you want to flash.
Only OpenGApps is tested. (open_gapps-arm64-11.0-pico-20210130-TEST.zip)
Enter TWRP recovery.
The first boot to TWRP might be very slow because of the unmatched file systems.
Format the whole system, data, cache partitions using the format menu.
You will type `yes` to do that.
Flash the images.
If you're going to install GApps or something, you have to install the LineageOS first.
Reboot the system.
Done.
# Known issues
Follows it might have the same issues on my LineageOS 18.1
Thank all of you for the feedback
# Sources
Device Tree
gts3l-common: https://github.com/awesometic/android_device_samsung_gts3l-common
gts3llte: https://github.com/awesometic/android_device_samsung_gts3llte
gts3lwifi: https://github.com/awesometic/android_device_samsung_gts3lwifi
Kernel: https://github.com/awesometic/android_kernel_samsung_msm8996
Vendor: https://github.com/awesometic/proprietary_vendor_samsung
# Telegram Groups
If you are interested in developing this potential machine, please tell me through PM then I will send you the invitation link.
If you need a general discussion channel for this potential machine or want to share the news of its Android projects from anyone to everyone, you can join our discussion group chat.
Galaxy Tab S3 General Discussion
# Buy me a coffee
If you like my efforts or would like to support me, please don't hesitate to buy me a cup of coffee.
https://www.paypal.com/paypalme/awesometic
# Credits / Special thanks to
Android Open Source Project
LineageOS Team
HavocOS Team
@Valera1978 for his amazing previous work including his MSM8996 kernel
@supermike86 and @samsuffit for testing LineageOS 18.1 for T820, which is I don't have one
@bmwdroid and @cherepanov for confirming the LTE works
@sebmue for letting me know that the useful information for palm rejection, and @ghostwheel for sharing its working source codes on Android 9
@switchgott for helping me in the development discussion and creating Telegram groups
All from our Telegram discussion channel, @EonOfBlack , Sands, David Becker, ...
@LuK1337 for giving me a hint to fix the quad-speakers.
## Changelogs
2022. 5. 8
gts3l-common: Applied the new security patch, April 5, 2022
gts3l-common: Updated to HavocOS 4.16
The other changed things are the same as the LineageOS 18.1 (2022. 5. 8)
2022. 2. 23
gts3l-common: Applied the new security patch, February 5, 2022
gts3l-common: Updated to HavocOS 4.14
The other changed things are the same as the LineageOS 18.1 (2022. 2. 23)
2022. 2. 9
gts3l-common: Applied the new security patch, January 5, 2022
gts3l-common: Updated to HavocOS 4.13
The other changed things are the same as the LineageOS 18.1 (2022. 2. 9)
2021. 12. 19
Initial release
## Good to know
Basically, it follows my LineageOS 18.1 changelogs.
reserved
nice to see something happening for the s3 ...
cannot test right now, but great work so far ;-)
How does havocOS Compare to your lineageOS in terms of speed?
Floobah said:
How does havocOS Compare to your lineageOS in terms of speed?
Click to expand...
Click to collapse
I think those two have the almost same speed. But HavocOS has more customizable options and it passes CTS profile with Magisk Hide.
This rom works very well. Thanks for releasing it.
I have installed the lineage OS 18.1 ROM recently. Can I dirty flash this one or I have to format everything and loose root and all the applications I have installed?
xpil said:
I have installed the lineage OS 18.1 ROM recently. Can I dirty flash this one or I have to format everything and loose root and all the applications I have installed?
Click to expand...
Click to collapse
You should format everything to move to another ROM. It is strongly recommended, and we don't know what problem will be caused by dirty flashing from LineageOS to HavocOS.
xpil said:
I have installed the lineage OS 18.1 ROM recently. Can I dirty flash this one or I have to format everything and loose root and all the applications I have installed?
Click to expand...
Click to collapse
I did a dirty flash from latest LOS 18.1 to Havoc since it has the same LOS base and i had no issues so far.
But i idk how it will be for you. Only thing i did was formating system partition in TWRP before i flashed Havoc.
But try it on your own risk.
I was literally about to trade in my Tab S3 as it was on its last legs. Slow to do anything other than browse and even that was painful.
Having read these forums for a long time I thought I'd give this a try before committing £600.
After a few hiccups with TWRP not seeming to 'stick' I finally managed it.
What a difference! Its seriously like a new machine.
Fast, responsive and up to date.
Thank you so much for all your hard work.
ptwilliams said:
I was literally about to trade in my Tab S3 as it was on its last legs. Slow to do anything other than browse and even that was painful.
Having read these forums for a long time I thought I'd give this a try before committing £600.
After a few hiccups with TWRP not seeming to 'stick' I finally managed it.
What a difference! Its seriously like a new machine.
Fast, responsive and up to date.
Thank you so much for all your hard work.
Click to expand...
Click to collapse
I was exactly at the same point.. The difference is night and day! Great work from the Dev! Donation on the way
Hi Awesometic,
Thx for this rom.
Gonna try it.
Can I use open_gapps-arm64-11.0-pico-20211217 ?
Is this the right and latest one?
Duvel999 said:
Hi Awesometic,
Thx for this rom.
Gonna try it.
Can I use open_gapps-arm64-11.0-pico-20211217 ?
Is this the right and latest one?
Click to expand...
Click to collapse
Yeah it seems like. You can use that version, it should work.
thanx.....but i keep losing Gps signal
Thanks for the hard work! This rom is awesome! I gave up on this tablet due to lack of support. I feel like you made this a true ipad contender!
I hope you do android 12 as well!
Dear all. I have a question and if someone knows please help. I installed yesterday viper4android via magisk. Even though I played with all its parameters I could NOT notice any changes in the sound of the speakers. I CAN'T understand why.
Dear all, I have tried the steps to flash the HAVOC rom but facing an error. My tab (825) is correctly unlocked and the right recovery flashed. It can boot successfully to the recovery, however I see the error E: failed to verify whole-file signature. With other ROMs I flash, I am able to skip the signature verification prompt which does not appear here.
Please help me out if you can.
Thanks all.
prubyholl said:
Dear all, I have tried the steps to flash the HAVOC rom but facing an error. My tab (825) is correctly unlocked and the right recovery flashed. It can boot successfully to the recovery, however I see the error E: failed to verify whole-file signature. With other ROMs I flash, I am able to skip the signature verification prompt which does not appear here.
Please help me out if you can.
Thanks all.
Click to expand...
Click to collapse
You need to install TWRP to install custom rom.

Categories

Resources