Unlock bootloader and root honor 7x - Honor 7X ROMs, Kernels, Recoveries, & Other Devel

I want to unlock my honor 7x android 9.1 emui 9.1
Bootloader and root for customization is there any way to do it for free

rudra33 said:
for free
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/unlock-bootloader-for-free.4054619/post-84195325

-Alf- said:
https://forum.xda-developers.com/t/unlock-bootloader-for-free.4054619/post-84195325
Click to expand...
Click to collapse
If you're willing to pay the four euros, how would you unlock the bootloader?

Crescent2135 said:
If you're willing to pay the four euros, how would you unlock the bootloader?
Click to expand...
Click to collapse
You have to downgrade to A7 Nougat.
Use HiSuite, try it with chinese version:
Link
or
Link
If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Pie/Oreo build version number doing the dload method (flashing Service ROM ) and try again with HiSuite. (Dload process will erase your data!)
What is your build number? (Settings > About phone)

-Alf- said:
You have to downgrade to A7 Nougat.
Use HiSuite, try it with chinese version:
Link
or
Link
If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Pie/Oreo build version number doing the dload method (flashing Service ROM ) and try again with HiSuite. (Dload process will erase your data!)
What is your build number? (Settings > About phone)
Click to expand...
Click to collapse
9.1.0.146 (C00E135R2P7). I haven't tried doing the HiSuite thing yet.

I tried using the first HiSuite link and while I can downgrade versions, it's only to Android 8.
-Alf- said:
If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Pie/Oreo build version number doing the dload method (flashing Service ROM ) and try again with HiSuite. (Dload process will erase your data!)
Click to expand...
Click to collapse
I guess, I might need to do this then?

Crescent2135 said:
9.1.0.146 (C00E135R2P7). I haven't tried doing the HiSuite thing yet.
Click to expand...
Click to collapse
Full build and model please, e.g. AL00, AL10 etc.,
Crescent2135 said:
I guess, I might need to do this then?
Click to expand...
Click to collapse
Yes, ane then downgrade to A7, if it's possible

-Alf- said:
Full build and model please, e.g. AL00, AL10 etc.,
Yes, ane then downgrade to A7, if it's possible
Click to expand...
Click to collapse
It's the BND-AL10.

Crescent2135 said:
It's the BND-AL10.
Click to expand...
Click to collapse
Okay, supported model , now you can try to download to A7 using the same method

-Alf- said:
Okay, supported model , now you can try to download to A7 using the same method
Click to expand...
Click to collapse
Pardon, but what method?

Crescent2135 said:
Pardon, but what method?
Click to expand...
Click to collapse
HiSuite

-Alf- said:
HiSuite
Click to expand...
Click to collapse
I've downgraded it to Emui 8. HiSuite doesn't seem to let me downgrade it any further than that though, instead pushing for me to upgrade again.

Crescent2135 said:
I've downgraded it to Emui 8. HiSuite doesn't seem to let me downgrade it any further than that though, instead pushing for me to upgrade again.
Click to expand...
Click to collapse
Your current build number?

-Alf- said:
Your current build number?
Click to expand...
Click to collapse
BND-AL10 8.0.0.368(C00)

Crescent2135 said:
BND-AL10 8.0.0.368(C00)
Click to expand...
Click to collapse
Okay, download 8.0.0.352 service ROM
Link
Unpack, find dload folder in "Software", copy it to the SD card (without unpacking it! ).
Turn of the phone, press and hold Power and both Volume buttons.
- initial settings and try HiSuite again.

-Alf- said:
Okay, download 8.0.0.352 service ROM
Link
Unpack, find dload folder in "Software", copy it to the SD card (without unpacking it! ).
Turn of the phone, press and hold Power and both Volume buttons.
- initial settings and try HiSuite again.
Click to expand...
Click to collapse
I managed to downgrade it to 8.0.0.352, but HiSuite's doesn't give me an option to downgrade from it. It just tells me that it's the latest version available.

-Alf- said:
You have to downgrade to A7 Nougat.
Use HiSuite, try it with chinese version:
Link
or
Link
If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Pie/Oreo build version number doing the dload method (flashing Service ROM ) and try again with HiSuite. (Dload process will erase your data!)
What is your build number? (Settings > About phone)
Click to expand...
Click to collapse
I tried,
HiSuite_9.1.0.305 (from the Link)
HiSuite_10.0.0.510_OVE
HiSuite_10.0.1.100 (from the Link)
HiSuite_11.0.0.650_OVE versions,
There is no such options related to downgrade/switch to older version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Help me: Phone update.app failse

Help me: Phone update.app failse
can not unlock bootloader
can not flash update.app
....
Help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
which firmware you tried??
which firmware number you have before issue?
Try using Huawei Multi Tools software.
Extract the firmware for your phone model using Huawei update extractor software.
And use the software above said.
hemanth.k said:
Try using Huawei Multi Tools software.
Extract the firmware for your phone model using Huawei update extractor software.
And use the software above said.
Click to expand...
Click to collapse
Can not unlock bootloader.
vietpro2008 said:
Can not unlock bootloader.
Click to expand...
Click to collapse
Only option left is dload..you have to download correct firmware for dload..
Correct firmware means yoi cannot flash lower number firmware if yoi were on higher number firmware..
You will have to flash same number full firmware or higher number firmware...
hassanjavaid8181 said:
Only option left is dload..you have to download correct firmware for dload..
Correct firmware means yoi cannot flash lower number firmware if yoi were on higher number firmware..
You will have to flash same number full firmware or higher number firmware...
Click to expand...
Click to collapse
Install dload 15% is error.
vietpro2008 said:
Install dload 15% is error.
Click to expand...
Click to collapse
What is your phone model and build number??
You can try rollback package and then try to flash full firmware...
hassanjavaid8181 said:
What is your phone model and build number??
You can try rollback package and then try to flash full firmware...
Click to expand...
Click to collapse
Phone model KII-L21C185
Build number: CUSTC185D002
I can not Flash KII-L21C185B321CUSTC185D001 New version.
vietpro2008 said:
Phone model KII-L21C185
Build number: CUSTC185D002
I can not Flash KII-L21C185B321CUSTC185D001 New version.
Click to expand...
Click to collapse
It should flash...
You should try any other firmware like b310 and tyen upgrade to b321..
hassanjavaid8181 said:
It should flash...
You should try any other firmware like b310 and tyen upgrade to b321..
Click to expand...
Click to collapse
Error for all version.
Phone model Huawei GR5
Version KII-L21 C636B310CUSTC636D001
I flash rom KII-L21 C185B130CUSTC185B130 to Phone Brick
Restart. The phone enters the PUK code ?
I flash Huawei_GR5_Firmware_KII-L21_Android 6.0.1_EMUI 4.0_C636B310CUSTC636D001_Viet Nam_Bangladesh_Channel-Others rom but still error.
vietpro2008 said:
Error for all version.
Phone model Huawei GR5
Version KII-L21 C636B310CUSTC636D001
I flash rom KII-L21 C185B130CUSTC185B130 to Phone Brick
Restart. The phone enters the PUK code ?
Click to expand...
Click to collapse
Why would you flash firmware which is not made your phone....
You can try with erocovery...
hassanjavaid8181 said:
Why would you flash firmware which is not made your phone....
You can try with erocovery...
Click to expand...
Click to collapse
I do not understand Erecovery. It works like that.
What firmware can i use pls give me a kink
renzeardiente said:
What firmware can i use pls give me a kink
Click to expand...
Click to collapse
Give me your phone detalis like model number and build number..
hassanjavaid8181 said:
Give me your phone detalis like model number and build number..
Click to expand...
Click to collapse
Huawei GR 5
Huawei kll L22
HUAWEI KLL L22 C636B310
IMEI NOW IS UNKNOWN
AFTER I UPDATE ITS HAVE A BUG ITS LIKE THAT ON PICTURE THE BUG IS AUTOMATICALLY LOWBATT,WIFI LOCK,AND NO SIM CARD DETECTED
PLS HELP ME
renzeardiente said:
Huawei GR 5
Huawei kll L22
HUAWEI KLL L22 C636B310
IMEI NOW IS UNKNOWN
AFTER I UPDATE ITS HAVE A BUG ITS LIKE THAT ON PICTURE THE BUG IS AUTOMATICALLY LOWBATT,WIFI LOCK,AND NO SIM CARD DETECTED
PLS HELP ME
Click to expand...
Click to collapse
You should try another firmware...
I tried to find but couldn't..

Root after Getting official Oreo Update

Plz help me to overcome this error. I have: RNE-L21C185B142 Custom Version: CUSTC185D001
Today I updated to Official Oreo from system update. Now it is: RNE-L21 8.0.0.310 (C185)
Then tried to use a recovery and Super SU zip
(2 zips tried one from elemental ROM for 8.0 and other from Super SU web site)
Both show same error as in following screenshots, plz help if there is a proper Oreo TWRP and Super SU that works.
1 more point is, I never got data folder back up whenever I tried to take a backup from TWRP
(both in nougat and after oreo update), tried a lot of methods discussed already, I would still get
createFork() error, if I uncheck data then I can take backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
usman400 said:
Plz help me to overcome this error. I have: RNE-L21C185B142 Custom Version: CUSTC185D001
Today I updated to Official Oreo from system update. Now it is: RNE-L21 8.0.0.310 (C185)
Then tried to use a recovery and Super SU zip
(2 zips tried one from elemental ROM for 8.0 and other from Super SU web site)
Both show same error as in following screenshots, plz help if there is a proper Oreo TWRP and Super SU that works.
1 more point is, I never got data folder back up whenever I tried to take a backup from TWRP
(both in nougat and after oreo update), tried a lot of methods discussed already, I would still get
createFork() error, if I uncheck data then I can take backup.
Click to expand...
Click to collapse
try to root your phone with magisk its better and stable
chimere2016 said:
try to root your phone with magisk its better and stable
Click to expand...
Click to collapse
Can u plz indicate the link where magisk root for oreo is available ?
Hello
root with magisk v16 stable.
everything is working properly.
Chisetdel31260 said:
Hello
root with magisk v16 stable.
everything is working properly.
Click to expand...
Click to collapse
send ss of your phone with magisk and android version please
scoutmoves said:
send ss of your phone with magisk and android version please
Click to expand...
Click to collapse
INSTALL zip magisk v16.
Safetynet pass OK. :good:
Go to Setting, select beta, install v16.4.
Voila:good:
Same here. Oreo install by Hwota on RNE-L01 euro verison.
sentavn said:
Same here. Oreo install by Hwota on RNE-L01 euro verison.
Click to expand...
Click to collapse
oréo b134 ??????
Chisetdel31260 said:
oréo b134 ??????
Click to expand...
Click to collapse
maybe you don't believe. But I am on B134 with OREO 8.0 , EMUI 8.0, full root
sentavn said:
maybe you don't believe. But I am on B134 with OREO 8.0 , EMUI 8.0, full root
Click to expand...
Click to collapse
you should try to install with twrp, install image the version.img file of b304
file version.img rne-l21c432b304 https://mega.nz/#!9hkEyaDB!YK2TCUXuE5xgLXDGcMb-tI58k3KCDNjXw8yZ4PDohUY
Thank you. I got it.
sentavn said:
Thank you. I got it.
Click to expand...
Click to collapse
bro my phone
Chisetdel31260 said:
you should try to install with twrp, install image the version.img file of b304
file version.img rne-l21c432b304 https://mega.nz/#!9hkEyaDB!YK2TCUXuE5xgLXDGcMb-tI58k3KCDNjXw8yZ4PDohUY
Click to expand...
Click to collapse
sentavn said:
Thank you. I got it.
Click to expand...
Click to collapse
Worked? How do you flashed that version.img file?
Would it work for me? (Screenshot attached).
Chisetdel31260 said:
you should try to install with twrp, install image the version.img file of b304
file version.img rne-l21c432b304 https://mega.nz/#!9hkEyaDB!YK2TCUXuE5xgLXDGcMb-tI58k3KCDNjXw8yZ4PDohUY
Click to expand...
Click to collapse
franzpimp87 said:
Worked? How do you flashed that version.img file?
Would it work for me? (Screenshot attached).
Click to expand...
Click to collapse
I didn't flash yet because everything are fine with me. What do u wanna do? I saw it's ok with your attachment
I extracted right version.img for my device RNE-L01C432
Check the attachment
Chisetdel31260 said:
INSTALL zip magisk v16.
Safetynet pass OK. :good:
Go to Setting, select beta, install v16.4.
Voila:good:
Click to expand...
Click to collapse
Thanks for the repoly,
do you have some twrp for rne-l22 c636? im afraid to flash the twrps for l21
scoutmoves said:
Thanks for the repoly,
do you have some twrp for rne-l22 c636? im afraid to flash the twrps for l21
Click to expand...
Click to collapse
Hello
en emui 8.0 uses this recovery catuva TWRP it is simple to install.
https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2
download on the pc, connect the phone in fastboot mode (low volume + power).
*** double click on the .bat file.
he will install it alone.
sentavn said:
I didn't flash yet because everything are fine with me. What do u wanna do? I saw it's ok with your attachment
Click to expand...
Click to collapse
I had problem flashing SuperSU, like in the OP. But find another root method.
Thanks.
franzpimp87 said:
I had problem flashing SuperSU, like in the OP. But find another root method.
Thanks.
Click to expand...
Click to collapse
You can not flash SuperSU right now. Flash Magisk 16 and then update to 16.4 Beta.
sentavn said:
You can not flash SuperSU right now. Flash Magisk 16 and then update to 16.4 Beta.
Click to expand...
Click to collapse
viper4android working, if you can please confirm?

FRP lock

I have a problem, after flash element V1.1 EMUI 8.0,I have a FRP lock, i was so stupid to relock OEM, and now i just boot into erecovery, can not unlock the OEM :
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed),
now, how to flash stock firmwave or unbrick. please help me.
NMHT said:
I have a problem, after flash element V1.1 EMUI 8.0,I have a FRP lock, i was so stupid to relock OEM, and now i just boot into erecovery, can not unlock the OEM :
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed),
now, how to flash stock firmwave or unbrick. please help me.
Click to expand...
Click to collapse
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Chisetdel31260 said:
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Click to expand...
Click to collapse
I can not boot the rom, boot loop erecovery and recovery stock, my device is RNE-L22C636
now, how to back stock rom. :crying::crying:, please help me
Search for dc-phoenix it should help you even if its bricked
Chisetdel31260 said:
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Click to expand...
Click to collapse
How do I contact you?
i need dc-unlock, dc-phoenix v52 +15 crédits
NMHT said:
How do I contact you?
i need dc-unlock, dc-phoenix v52 +15 crédits
Click to expand...
Click to collapse
you need dc-unlocker, to detect the device and access the support area.
https://www.dc-unlocker.com/downloads/get/7JPrdoVQ
after, you need to install the tool dc-phoenix v52,
https://files.dc-unlocker.com/share.html?v=share/D5E38E4A4EF446F6B58AD9DDE1C36FE7
with you can reinstall a full firmware for your device in your version
Chisetdel31260 said:
you need dc-unlocker, to detect the device and access the support area.
https://www.dc-unlocker.com/downloads/get/7JPrdoVQ
after, you need to install the tool dc-phoenix v52,
https://files.dc-unlocker.com/share.html?v=share/D5E38E4A4EF446F6B58AD9DDE1C36FE7
with you can reinstall a full firmware for your device in your version
Click to expand...
Click to collapse
I do not have a DCPhoenix_v52 account, dc-unlocker does not recognize the device, does not recognize the port, my device only gets into fastboot and erecovery, but dc-unlocker does not recognize the port,
DC - Unlocker 2 Client 1.00.1396
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei Nova 2i
Selected Applications port COM9
Selected Diagnostics port COM9
Phone not found !
Online Method with Erecovery
To be sucessfull here Phone needs to get the OEMINFO.Bin or HWOTA OEMINFO from TWRP or HWOTA
Unlock Bootloader doesnt matter, at least a proper OEMINFO needs to get flashed
1:First set your Router to DNS 81.177.139.39 truly complete, that means all traffic routed throght this DNS
DNS: Primary 81.177.139.39 Secondary 81.177.139.39 It wont work if you dont edit it complete
2 Open Firmware Finder PC Programm Now click on common Base. Now look for your Firmware (same as your OEMINFO ) Now on your Firmware Changelog link rightclick. Copy und on Firmware Access
Please check if its working.
Now on Firmware Proxy , give in link Changelog.xml and click on Set.
Now on Register Update example like http://update.hicloud.com:8180/TDS/d.../changelog.xml
You registered fw ......... for ip 77.66.44.31.2
Now restart phone in erecovery . Now choose Network with Router DNS with 81.177.139.39
Connect and Firmware should load like Funky Huawei like .
Works 100%, No bad flashed Firmware anymore.
tested and work perfectlyy
i used OEMINFO RNE-L22C636, I found the right firmwave :http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v137961/f1/full/changelog.xml
, but I got an error getting falied info package, how to fix that,please help me
have you a card memory?
thugsalah said:
have you a card memory?
Click to expand...
Click to collapse
yes, i have card memory
I use update.app but it's bigger than 4gb, memory card in fat32 format can not copy, so now I have to do
NMHT said:
I use update.app but it's bigger than 4gb, memory card in fat32 format can not copy, so now I have to do
Click to expand...
Click to collapse
use an adapter to plug it into a computer and format the sd card as ntfs
baoprokute1234 said:
use an adapter to plug it into a computer and format the sd card as ntfs
Click to expand...
Click to collapse
i try but falled, update falled
for me the dns method has work !! my bad
Hi the reason is you used an unapproved firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In your case, you can use this version:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v129170/f1/full/changelog.xml
I am following this post for same issue.
I changed the DNS to 81.177.139.39 under the heading in my route: Use the following Static DNS IP address
I set both primary and secondary DNS, apply/save chnages, the Firmware changlog link is approved as checked from Firmware finder.
But I am not sure about this step:
Now on Firmware Proxy , give in link Changelog.xml and click on Set.
I dont see any 'Set' button or link any where in firmware finder version 1.5.6.1
But eRecovery will still show error Getting package info failed
Plz help me what am I missing

Question poco x3 GT root

I'm trying to install Magisk because the poco x3 GT has arrived and I was able to unlock it.
After fastbooting the img file created by Magisk, it becomes a boot loop.
I've succeeded with the same procedure on Mi9, so I don't think it's wrong, but if I try again, the result is the same.
MIUI is not 12.5.2.
If anyone has succeeded, please give me some advice.
I wish someone could make a trwp for chopin
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
红豆生南瓜 said:
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
Click to expand...
Click to collapse
Thank you very much.
I'm using the global version 12.5.2, but I'll give it a try.
You may also need this file
Tommy SUDA said:
Thank you very much.
I'm using the global version 12.5.2, but I'll give it a try.
Click to expand...
Click to collapse
红豆生南瓜 said:
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
Click to expand...
Click to collapse
I tried to burn the boot.img file with the fastboot flash recovery command, but it didn't work.
Tommy SUDA said:
I tried to burn the boot.img file with the fastboot flash recovery command, but it didn't work.
Click to expand...
Click to collapse
first,fastboot boot.img, then,fastboot vbmeta.img. Refer to poco m3 pro's method
Of course, it may also be caused by different versions of MIUI system
红豆生南瓜 said:
first,fastboot boot.img, then,fastboot vbmeta.img. Refer to poco m3 pro's method
Of course, it may also be caused by different versions of MIUI system
Click to expand...
Click to collapse
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
thanks,I'll try it
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
I confirmed the poco m3 pro's method.
One thing to check, do you patch this boot file with magisk and then fastboot? Or can it be used as it is?
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
The global version of boot.img supporting magisk has been made in China, but he has to pay. I can't get it, sorry
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
红豆生南瓜 said:
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
Click to expand...
Click to collapse
Thanks again ,I‘ll try it
Tommy SUDA said:
thanks,I'll try it
Click to expand...
Click to collapse
it's stock not patched magisk yet
红豆生南瓜 said:
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
Click to expand...
Click to collapse
I unzipped the one-click tool, but I don't know how to use it. Can you tell me
Tommy SUDA said:
I unzipped the one-click tool, but I don't know how to use it. Can you tell me
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect the phone to the computer in FastBoot mode, run the bat file, and then select serial number 9,flash boot and vbmeta
红豆生南瓜 said:
View attachment 5405045
Connect the phone to the computer in FastBoot mode, run the bat file, and then select serial number 9,flash boot and vbmeta
Click to expand...
Click to collapse
I connected poco to a PC in fastboot mode, executed a batch file, and entered the number 9 from the menu screen, but the screen closes and exits. If anyone has any problems, please let me know.
Tommy SUDA said:
I connected poco to a PC in fastboot mode, executed a batch file, and entered the number 9 from the menu screen, but the screen closes and exits. If anyone has any problems, please let me know.
Click to expand...
Click to collapse
Maybe it's a driver problem. I'm not sure. This is another tool you can try.
红豆生南瓜 said:
Maybe it's a driver problem. I'm not sure. This is another tool you can try.
Click to expand...
Click to collapse
I was able to successfully root with this tool. I'm really thankful to you.

How To Guide OnePlus ACE 2 Convert to OXYGENOS - Fastboot ROM - FLASH_ALL

OnePlus ACE 2 Convert to OXYGENOS
**** Flash at your own risk ****
Download and unzip: ONEPLUS_ACE_2_CONVERT_TO_11R.zip
ONEPLUS_ACE_2_CONVERT_TO_11R.zip
drive.google.com
-------------------------------------------------------------
To boot into bootloader from Android
Turn On developer mode
Turn on USB Debug
Turn on OEM-unlock
Run $ adb reboot-bootloader
Run $ fastboot flashing unlock
Reboot back into bootloader
OPEN ROM FOLDER
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RUN FLASH_ALL.EXE
Wait processing
Fomat data
Go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
Where is the file and download link?
G3LO14 said:
Where is the file and download link?
Click to expand...
Click to collapse
update on post, bro
Mobile_Slution said:
update on post, bro
Click to expand...
Click to collapse
Can we relock the bootloader after this? Or not?
G3LO14 said:
Can we relock the bootloader after this? Or not?
Click to expand...
Click to collapse
yes. no problem
Does this solve the region lock problem as well? And is it OTA support? Anyways, thank you so much for this
G3LO14 said:
Does this solve the region lock problem as well? And is it OTA support? Anyways, thank you so much for this
Click to expand...
Click to collapse
ota not support, bro
Mobile_Slution said:
ota not support, bro
Click to expand...
Click to collapse
How about region lock issue?
G3LO14 said:
How about region lock issue?
Click to expand...
Click to collapse
Are you region locked? bro
Mobile_Slution said:
Are you region locked? bro
Click to expand...
Click to collapse
I am getting the pop up message about region locked when I insert my sim. Im from Philippines.
what device model do you have? is it the 12/256 version and does it show 12/256? oneplus 11r only has 8/128 and 16/512 option..
Mobile_Slution said:
OnePlus ACE 2 Convert to OXYGENOS
**** Flash at your own risk ****
Download and unzip: ONEPLUS_ACE_2_CONVERT_TO_11R.zip
ONEPLUS_ACE_2_CONVERT_TO_11R.zip
drive.google.com
-------------------------------------------------------------
To boot into bootloader from Android
Turn On developer mode
Turn on USB Debug
Turn on OEM-unlock
Run $ adb reboot-bootloader
Run $ fastboot flashing unlock
Reboot back into bootloader
OPEN ROM FOLDER
RUN FLASH_ALL.EXE
Wait processing
Fomat data
Go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
Click to expand...
Click to collapse
Mirror link pls
Mobile_Slution said:
ota not support, bro
Click to expand...
Click to collapse
Why wouldn't OTA be supported? Isn't this an official OnePlus OxygenOS firmware for OnePlus 11R?
@Mobile_Slution
does it support ColorOS 13.0.0 A.08 ?
G3LO14 said:
I am getting the pop up message about region locked when I insert my sim. Im from Philippines.
Click to expand...
Click to collapse
Does the problem of region locked affect to sim card working in your country?
kaiser_roma225 said:
Does the problem of region locked affect to sim card working in your country?
Click to expand...
Click to collapse
Already fixed it. I just went to an Oppo Service center and requested to be unlocked. It only took 15 mins. Afterwards, I am not getting any pop up region locked message anymore.
jack15381 said:
@Mobile_Slution
does it support ColorOS 13.0.0 A.08 ?
Click to expand...
Click to collapse
Any Idea? Anybody try?
Anyone with 12+256 version have this work sucessfully?
hidego34 said:
Anyone with 12+256 version have this work sucessfully?
Click to expand...
Click to collapse
yes
ACE2 16+256 Can I flash it?
ACE2 16+256可以刷吗?
Mod. edit: post translated. alecxs

Categories

Resources