This Is How Too Convert your US model SM-G973U S10 Into Hong Kong Model SM-G9730 S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download TGY firmware for the SM-G9730 model phone
2, Also Have US firmware downloaded for the SM-G973U
3. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
4. Load the BL and CP files in odin from the SM-G973U firmware In matching slots in odin
5. Load the AP and Home_CSC files from the SM-G9730 firmware in matching slots in odin
6. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
This Is How Too Convert your US Model SM-G973U S10 Into Canadian Model SM-G973W S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download Canadian firmware for the SM-G973W model phone
2. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
3. Extract the BEYOND1QLTE_CAN_SINGLE.pit from the CSC_OMC_OYN****.tar.md5 file
4. Load the BL,AP,CP and CSC_OMC_OYN****.tar.md5 files in matching slots in odin
5. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
6, In odin choose the pit tab and load the BEYOND1QLTE_CAN_SINGLE.pit you extracted above
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
This Is How Too Convert your Canadian Model SM-G973W S10 Into US Model SM-G973U/U1 S10
Bootloader Must Be Unlocked Too Do This!!
Downloads
USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download US firmware for the SM-G973U/U1 model phone
2. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
3. Extract the BEYOND1QLTE_USA_SINGLE.pitfrom the CSC_OMC_OYN****.tar.md5 file
4. Load the BL,AP,CP and CSC_OMC_OYN****.tar.md5 files in matching slots in odin
5. Load my USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
6, In odin choose the pit tab and load the BEYOND1QLTE_CAN_SINGLE.pit you extracted above
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
This Is How Too Convert your Hong Kong Model SM-G9730 S10 Into US Model SM-G973U/U1 S10
Bootloader Must Be Unlocked Too Do This!! Downloads
G9730ZHU4EUA8_G9730TGY4EUA8_USA.7z
USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
Directions
This has not been tested as I do not have the SM-G9730 model phone so let me know
1, Extract G9730ZHU4EUA8_G9730TGY4EUA8_USA.7z
2. Reboot phone too TWRP or stock recovery and wipe data then reboot too download/bootloader
3. Load files in appropriate slots in odin along with USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
In UserData slot and flash with odin.
4. Phone will reboot too twrp and process files will reboot back to TWRP once during install then will boot too setup
5, After setup phone may tell you to reboot too install new sim.
jrkruse said:
This Is How Too Convert your US model SM-G973U S10 Into Hong Kong Model SM-G9730 S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download TGY firmware for the SM-G9730 model phone
2, Also Have US firmware downloaded for the SM-G973U
3. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
4. Load the BL and CP files in odin from the SM-G973U firmware In matching slots in odin
5. Load the AP and Home_CSC files from the SM-G9730 firmware in matching slots in odin
6. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
Click to expand...
Click to collapse
I could not do it from G973U1 to G9730 the cell phone does not allow it
alexmen123 said:
I could not do it from G973U1 to G9730 the cell phone does not allow it
Click to expand...
Click to collapse
what firmware did you try it has to be tgy
Simply a silly question from me: Can we actually unlock the bootloader of the USA Galaxy S10?
From all I know is we can only unlock bootloader for the Exynos Version. Thanks and Huge love if you guys can show me the link or anything else to make my USA S10 free.
Thank you!
robocopvn said:
Simply a silly question from me: Can we actually unlock the bootloader of the USA Galaxy S10?
From all I know is we can only unlock bootloader for the Exynos Version. Thanks and Huge love if you guys can show me the link or anything else to make my USA S10 free.
Thank you!
Click to expand...
Click to collapse
Post 2 has info
[SM_G973U/U1/W_Snapdragon]-[Upgrade Easily Android 11 To 12 Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]
Must Have An Unlocked Bootloader To Do This! This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk...
forum.xda-developers.com
alexmen123 said:
I could not do it from G973U1 to G9730 the cell phone does not allow it
Click to expand...
Click to collapse
also were you trying this with a phone with unlocked bootloader? The bootloader on your SM-G973U1 must be unlocked
jrkruse said:
Were you also trying this with an unlocked bootloader phone? The bootloader of your SM-G973U1 must be unlocked
Click to expand...
Click to collapse
si esta desbloqueado. ¿Qué puedo hacer?
si Pongo firmware tyg en mi g973u1 . Activará segunda sim?
Translation:
if it is unlocked. What I can do?
if I put tyg firmware on my g973u1. Will it activate second sim?
[QUOTE = "jrkruse, publicación: 84541509, miembro: 1949695"]
¿Qué firmware probaste? Tiene que ser tgy
[/CITA]
really my interest is to convert my G973U1 into a dual SIM terminal. Is this possible by switching to the tgy firmware?
alexmen123 said:
[QUOTE = "jrkruse, publicación: 84541509, miembro: 1949695"]
¿Qué firmware probaste? Tiene que ser tgy
[/CITA]
really my interest is to convert my G973U1 into a dual SIM terminal. Is this possible by switching to the tgy firmware?
Click to expand...
Click to collapse
you cannot convert the US phones to dual sim because they dont have 2 seperate imei numbers
I mean they do but one is tied directly to the esim not a physical sim
jrkruse said:
This Is How Too Convert your US Model SM-G973U S10 Into Canadian Model SM-G973W S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download Canadian firmware for the SM-G973W model phone
2. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
3. Extract the BEYOND1QLTE_CAN_SINGLE.pit from the CSC_OMC_OYN****.tar.md5 file
4. Load the BL,AP,CP and CSC_OMC_OYN****.tar.md5 files in matching slots in odin
5. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
6, In odin choose the pit tab and load the BEYOND1QLTE_CAN_SINGLE.pit you extracted above
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
Click to expand...
Click to collapse
Hi, where can I find the file BEYOND1QLTE_CAN_SINGLE.pit. Looking forward to your help. Thanks a lot
Tuan Anh1 said:
Hi, where can I find the file BEYOND1QLTE_CAN_SINGLE.pit. Looking forward to your help. Thanks a lot
Click to expand...
Click to collapse
Read direction number 3
jrkruse said:
Đọc hướng số 3
Click to expand...
Click to collapse
thanks can i ask is there any way to fix the startup warning
Related
Hi this tutorial is for them who wants to upgrade to Android 6.0 on J5 and also for those who wants to downgrade back to 5.1 on their J5 (2015) manually using odin.
This tutorial will be divided into three section upgrade, downgrade and rooting.
Upgrade to Android 6.0
As Samsung has started rolling out android 6.0 for J5 (2015) model. It will be available to all the regions sooner or later on most of the models of J5. Incase if you are not getting OTA update of android 6.0 on your country and are curious to try Android Marshmallow, you can try to flash android 6.0 available for other country. For example: If you have J500H model and android 6.0 for J500H is available for some other countries but not in your country than you can download android 6.0 firmware of those countries and flash it through Odin.
Note: The model number of J5 should be same for example you cannot flash J500F firmware to J500H ,
you can only flash firmware of J500H to J500H, countries or area does not matter as long as the
device model is same.
Procedure:
1. Go to the link below and search for firmware for your device. (Eg: Galaxy J500H)
2. You will find firmware for various regions and android version. Download the android 6.0 firmware for your
region. If you don’t get android 6.0 for your region than download android 6.0 available for any region as you
prefer.
3. Download odin from the link below.
4. Backup any necessary things like apps, contacts or files as you may loose them.
5. Now follow the instruction given below and flash android 6.0 to your j5.
PRE-REQUIREMENTS:
Download & Install Galaxy USB Driver on your computer,
Enable USB debugging on your Galaxy J5 smartphone and OEM unlocking.
Your phone battery should be at 80% or above.
How to Install Stock Rom on Galaxy J5
1 . After downloading the Galaxy J5 Firmware and Odin software files from the download section.
2. Extract/unzip both files on your computer.
3. Now, boot your Samsung Galaxy J5 into download mode. To do that turn off the phone, after the phone is off,
press and hold the Volume Down + Home + Power buttons at the same time.
4. Connect your Galaxy J5 to your computer using USB Cable and wait till Odin software detects it. Once, Odin
software detects your phone, you will see the Added message on Odin.
5. Before installing the stock firmware on Galaxy J5 make sure that both Auto Reboot and F.Reset Time are selected.
Then, click on the AP button on Odin software and select the stock Rom where you have previously extracted it.
Now click start button. Odin will start flashing.
6. In the end, on the Odin software the pass message should be displayed and your Samsung Galaxy J5 will
reboot automatically.
7. Congratulation you have upgraded to android 6.0 Marshmallow.
Detailed tutorial for flashing via Odin:
https://androidmtk.com/flash-samsung-stock-rom-using-odin
Downloads:
1. Firmware
http://www.sammobile.com/firmwares/
http://updato.com/firmware-archive-select-model
2. USB driver
https://androidmtk.com/download-samsung-usb-drivers
3. Odin
https://androidmtk.com/download-odin-downloader-versions
Downgrade to Android 5.1.1
Incase if you don’t like android 6.0 and want to downgrade you can downgrade to android 5.1.1 by following these
steps.
1. Download 5.1.1 firmware for your region from the given link.
2. Follow the steps provided in above upgrade tutorial and flash the firmware using the Odin.
Rooting:
For rooting your J5 on Android 6.0 as well as Android 5.1.1 follow these steps.
1. Download the TWRP recovery from the link below.
Android 5.1.1 (Lollipop) ( Thanks @Nick Verse for TWRP recovery)
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3338869
Android 6.0 (Marshmallow) (Thanks @ganesh varma for TWRP recovery)
http://forum.xda-developers.com/android/development/recovery-samsung-galaxy-j500f-t3416960
2. Download Supersu zip from the link below
https://download.chainfire.eu/696/supersu/
For Marshmallow Users if you are facing bootloop after flashing supersu.zip . Flash the supersu file given in the link below.
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs (Thanks @jka_dark28 for link)
3. Now flash downloaded TWRP via Odin. (Follow the same process to Flash)
4. Transfer supersu zip file to your sd card.
5. After flashing TWRP. Reboot to recovery by pressing and holding Volume Up + Home + Power Button.
6. Now in TWRP select install, locate your Supersu zip file and flash it.
7. Than reboot your device. Congratulation you have rooted your device.
Note: Flashing TWRP and Supersu will void your warranty. So think before you flash. After flashing
TWRP do a nandroid backup first before flashing anything (even supersu file) so that if anything
goes wrong you can restore back.
And most important do everything on your own risk. I will not be responsible to any damage made to your device. But if you follow the process carefully you will not face any problem.
Hope this tutorial will help you all who don't have idea about these things.
Do write your comments and Hit thanks if it helped you.:laugh::good:
thanks for the tutorial!
testing
FOR MM
Wipe data factory reset in LL
Flash done : J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar
Device does not have drk please install drk first ( knox counter =01 ), reboot.
after 15 min device start.
- TWR Working
- Root not workin on MM J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar (Brazil) use this:
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs
- For Xposed framework use xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709:
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
What did you tried to flash? Is it MM or LL Firmware? And thanx for xposed and root file link.
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
ZemoDroid said:
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
Click to expand...
Click to collapse
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
rjrulz007 said:
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
Click to expand...
Click to collapse
I'm trying to root it.
Just flash twrp via odin. And install supersu zip via twrp. And remember it will void your warranty. One more thing do a nandroid backup before flashing anything.
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Whatisausername said:
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Click to expand...
Click to collapse
You have to enable USB debugging on your Galaxy J5 and OEM unlocking by going into developer Options. To enable developer option go to system, About Phone, and tap Build number 5/6 times. Let me know if you need more help.
.yeah it helped but my phone is stuck at samsung.
Whatisausername said:
I did both however my phone simply does not boot into twrp.. Odin said passed and knox is tripped.
Click to expand...
Click to collapse
Untick the Auto Reboot from the options in Odin and flash the recovery. After flashing finishes,power off the device(by removing battery) and hold [ VOLUME UP+HOME+POWER] to enter into the recovery and swipe to 'allow modifications'. Hope This will help you.
Whatisausername said:
.yeah it helped but my phone is stuck at samsung.
Click to expand...
Click to collapse
Did you flashed anything after installing TWRP recovery, like any zip files?
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Whatisausername said:
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Click to expand...
Click to collapse
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
OK well which partitions should i backup?
Works great, Thanks
Downgrade
Hi All!
If I want to downgrade from 6.0.1 to 5.1.1 via Odin, is it sure, that I need only one AP/PDA file from firmware sites?
Because I remember with an older phone, that if I need to downgrade, it need the other files too - Bootloader, Phone, CSC.
Is it sure that there is no need for them? If it, where can I download them?
Thanks!
Hello mate, I have gone back and forward from LP - MM a number of times.
I have had no problem with it as all.
I just flashed the firmware from from Sam mobile ( there are lots us links through out the ROMs thread)
I have only had to put the file into the AP and flashed no problem.
Just mage sure that the firmware is the correct one for your model
Sent from my Galaxy J5 using XDA Labs
Hey, I have a SM J500F 6.0.1, can I root it the same way as an 6.0 or do I have tobdo anything diferent??
I Suggest that if your device won't pass Samsung logo, put it in recovery mode and Factory Reset.
I Had that issue and i solved it doing that.:fingers-crossed:
Do I need stock recovery to only root my J5?? And will I lose all my data if I root it??
FOR SAMSUNG GALAXY ALPHA G850F
For anyone who doesn't want to download the whole stock firmware or is using a custom ROM and hasn't update baseband/modem in a while or want to go back to stock recovery here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Download Modem : https://goo.gl/5Yr1Dr
Download Recovery: https://goo.gl/y1O3WM
To flash modem:
1. Download Odin here https://goo.gl/wL8LFs
2. Open Odin and click on CP and find the modem.bin file (wait until it says Added then countinue to 3)
3. Put your phone in Download Mode
4. Connect it via a USB cable with your pc
5. Click Start
6. Wait until your phone is booted.
Done !
To flash recovery (the way I do it )(You must have root):
1. Get the Flashify APP here : https://goo.gl/aQqYGa
2. Open Flashify and select "Recovery Image" under Flash
3. Find your recovery.img file, click ok and flash it
4. Wait for it to finish
Done !
Thanks.
Please Help me!
Why isn't working on my phone? I follow all the instructions, Odin install all perfectly but keep doing boot loops
I've flashed modem but LineageOS still isn't detecting my sim card.
Amazing, thank you! Downloading >1GB from cheapy download sites like rapidgator capped at ~30KB/s with flaky wifi is impossible for me.
ty
DurimKlaiqi said:
FOR SAMSUNG GALAXY ALPHA G850F
here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Click to expand...
Click to collapse
I suppose the baseband (CP) version you have attached is G850FXXU1CPC1
I have version G850FXXU1COJ5 and can't update - Odin can't flash, no details for the error, just failed 1. The full name of the ROM I had flashed is
G850FXXS2CQA2_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
and previously I had used
G850FXXU2COK6_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
which seem to have same baseband.
Why can't I update the baseband?
Thank you
Hi,
I am trying to flash newer baseband from what I have: G850FXXU1COJ5
I tried but failed with flashing through odin of the following two:
G850FXXU2COK6.bin
G850FXXU1CPC1.bin
Perhaps I am making a mistake in flashing it, but I am not aware which is newer or what is the difference between these two U2 COK6 and U1 CPC1
U2 > U1, but COK6 < CPC1, so which one is newer?
Thanks
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Markpetit92 said:
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920T/
Hey
Yesterday I flashed a boot logo on my SM-G928F in TWRP. After that my phone doesn't boot into system or recovery anymore - there's always a blackscreen. I only can boot into download mode.
I tried to flash a stock-rom via Odin but that didn't helped - the same blackscreen, because a stock rom does not replace the boot logo.
I think I have to flash the stock boot logo ( https://drive.google.com/file/d/1378RQ5w_vAAmnQ3HB0FymZXWIm12T0Mg/view ) , but thats a zip which I can't flash via Odin.
There a two ways in my mind which could work:
1. Getting a tar.md5 file with the stock boot logo.
2. Getting a tool which allows to flash zips in download mode of the phone.
I really hope that someone could help me with my big problem.
Best regards
DGB
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
nr10prashant said:
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
Click to expand...
Click to collapse
Thank you for your answer but that didn't worked. The problem is that flashing the stock firmware doesn't replace or repair the boot image. So I've got a never ending blackscreen when I want to boot in system or TWRP/Recovery and that means that I'm not able to configure ADB Sideload.
I can only boot into download mode, nothing else.
I think the jpg of the boot logo I've installed was corrupted so it can't be loaded
You are in download mode so you have to press all the keys including the home button and once the download mode closes then press the "volume up key and power key and also the home button and then your phone will automatically reboot into recovery.
I know, I tried that multiple times but it doesn't work. Blackscreen... only a never ending blackscreen. The download mode is the only thing taht works. I have to flahs the old boot logo via download mode... but i don't know how
Wait for the battery to be drained out completely and then do what i said earlier
nr10prashant said:
Wait for the battery to be drained out completely and then do what i said earlier
Click to expand...
Click to collapse
I did. but it didn't work, too
I really need someone who is able to integrate the stock boot logo into a custom rom which can be flashed via Odin... Or I need a tool which allows to install zips in download mode. I tried adb sideload again but it didn't recognizes my phone when its not in recovery.
I really think that my S6 edge + is nearly died :crying:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Inderpreets said:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Click to expand...
Click to collapse
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
яι¢αя∂σ said:
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
Click to expand...
Click to collapse
I only tried to flash stock firmware with AP in Odin... and I tried stock rom with re-partition.
Where do I get those 4 files? I need XEU for my SM-G928F. It would be very nice if you could give me a more detailed instruction for this because I never worked with PIT...
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
яι¢αя∂σ said:
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
Click to expand...
Click to collapse
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
DGB100 said:
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
Click to expand...
Click to collapse
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
SmartSwitch still works for my G925v.
яι¢αя∂σ said:
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
Click to expand...
Click to collapse
I got my phone back to normal so thank you very much!
I have the same problem on my j2 prime I can only goto download mode and in odin tried to install stock firmware but got write fail..can you please help me with this error
Must Have An Unlocked Bootloader To Do This!
This A full stock firmware file I have created to flash with odin to automatically install TWRP recovery along with Disable VBMETA image. The Userdata _AIO tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!
Downloads
SM-G981U/U1/W- Model
G981USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G986U/U1/W- Model
G986USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G988U/U1/W- Model
G988USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load files in appropriate odin slots
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
elliwigy
klabit87
Krog18
me2151
stang5litre
Raymonf for modified odin
rayan-refoua for boot animation
TheMadScientist
afaneh92
kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
JDBarlow for test S20 stuff
markfm For Bitsafe Firmware
Source For Userdata AIO
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
jhr5474 said:
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
Click to expand...
Click to collapse
I dont have s20 so Im limited what I can make
If tokens can be updated to flash higher bootloaders then I will adjust files accordingly
This works great! I flashed the entire U1 DUB7 update with the force wipe with BL files in the USERDATA slot. Everything went well.
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
scepz said:
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
Click to expand...
Click to collapse
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
jrkruse said:
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
Click to expand...
Click to collapse
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
scepz said:
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
Click to expand...
Click to collapse
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
jrkruse said:
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
Click to expand...
Click to collapse
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
scepz said:
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
Click to expand...
Click to collapse
I'll make a specific one for sm-g981v
jrkruse said:
I'll make a specific one for sm-g981v
Click to expand...
Click to collapse
Ok
scepz said:
Ok
Click to expand...
Click to collapse
files in the OP
jrkruse said:
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
Downloads
SM-G981U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G981V- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981V_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981V_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G986U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G986_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G986_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G988U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G988_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G988_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_G98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_G98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Click to expand...
Click to collapse
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Gianni's said:
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
The ones without bootloaders will work. The NO_BL ones. Probably have to use the force wipe one
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
rlewis312010 said:
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
Click to expand...
Click to collapse
I did it that way, used the BL included file and flashed all the stock files, after the full wipe everything that I needed was included. Worked great, on UI 3.1 rn
It worked for me also, thanks for making this.
hi jrkruse i just got an A71 5g unlocked (thanks afaneh92), and i was wondering if you could make an aio userdata file for it? so i can flash ui 3.1 firmware to it? like this for my s20 ultra..(this thread)
I wanted to root my A52 5G (SM-A526B) i first unlocked the bootloader
then i downloaded my Firmware with Frija and patched the boot.img with Magisk then i went into download mode and flashed it with Odin
Odin gave me a Green PASS Message and i knew i needed to factory reset with recovery mode but i couldnt get into it then i got into a boot loop with the Samsung Galaxy Bootlogo
then i tried to flash Twrp with odin to factory reset because i couldnt get into the stock recovery mode Odin again gave me a PASS Message then i tried to get into recovery mode but it still didnt work and now im trying to flash Stock Firmware but cant get it to work what should i do
The picture is what happens when i try to boot please help me to flash stock firmware
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
The a52 5g doesn't have twrp currently. Also, you might have flashed the incorrect firmware.
Plus, just for you to know, you do not need to do factory reset after flashing your firmware. What steps have you taken to flash this firmware? How did you patch magisk? Show the steps so we can help you cuz you might have done something wrong
Ok it seems that your mistake here is that you are trying to flash boot.img. so what you actually suppose to do is to download the firmware, take the AP file from the firmware(don't extract the file!). Then, move the file to your phone and download magisk on your phone. You will see that magisk is offering you to install magisk on the top corner of your screen. You need to choose to patch the file, the AP file. Once magisk done, on your file explorer(probably in downloads) a file called "magisk_patched xxxx.tar" (the xxxx representing the version of magisk). Take this file and copy it to your computer, and on Odin, instead of using the AP file, use the magisk file. Boom, done. Now first, we need to recover your phone to its original condition. Take the AP file and flash it(not the boot.img!)
DownBaddie said:
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
Click to expand...
Click to collapse
Try flashing other parts of firmware, not just AP
i.e. BL, CSC and CP
But don't add home_csc (USERDATA).
If all fails, you can use EDL mode to flash firmware
How To Flash Qualcomm MBN Firmware Via QPST tool
If your device is based on Qualcomm’s CPU and you’re searching for an easy way to flash the device’s stock ROM, here ends your search. You just need the QPST tool and the instructions here to guide you. Follow the instructions below to get you started. Prerequisites: Qualcomm QPST tool –...
www.leakite.com