Moto g5 descendent rom android 11 - Moto G5 ROMs, Kernels, Recoveries, & Other Develop

Thanks veeronez

https://mega.nz/file/rlkWCSST#PfsCyBO9DTm1zOQSXAoG4GEnWTOTePQ45E4ZFaTbH4U
Download descendent rom 11 for Moto g5 cedric ,do clean install,volte problem can be solved in ph treble settings by installing ims apk and rebooting ,use nikgapps or open gapps,rom is pre rooted and bugfree ,thank u very much veeronez .note:xinternal sd card mod works !

Hi, getting stuck in descendant boot animation (moto xt-1670). Thanks for sharing.
Edit: now working. Flashed again without gapps (are already included) and wiped internal storage & cache.

I flashed it on xt1677 ,used open camera because of camera crash after edxposed installation

Related

[ROM][PORT] PAC ROM UNOFFICIAL for Redmi Note 4G Single Sim

Hi guys, this is my first port, i am not a developer, i have just followed a rom porting guide.
created by @rishabh.raj37
This Rom is based on lastest CM11 build by jkaz.
Working :
Everything..(Including Headphones)
Not Working :
None
Procedure :
1. Download the Rom and gapps and copy both files in to sd card or ext-sd.
2. Reboot into recovery
3. wipe cache, dalvik cache, data...
4. Install both rom and gapps.
5. Reboot phone...
I am not responsible for bricked devices.
Credits:
Xda
Cyanogenmode team
Pac-man developers
Mokee developers,
@LiquidPlacidity
JKaz
@Jamil69
@umangleekha (For Headphone fix patch)
I take credit only for porting this rom to our device, but i don't take credit any other way...
ROM Download
Gapps
For root access flash zip file from the link
SuperSu
Note:
1. - Just edit the build.prop, find the line: ro.sf.lcd_density = 270 change the value to 320 save it and reboot.
2. - Download system app remover from playstore
- Open it and grant root permission
- select and uninstall nfc service and pac console.
- reboot.
- this removes nfc wake and pac console force close.
Great News.. Thanks Bro, finally another cusrom for Dior.
asrupesh said:
Hi guys, this is my first port, i am not a developer, i have just followed a rom porting guide.
created by @rishabh.raj37
This Rom is based on lastest CM11 build by jkaz.
Working :
Everything..(Including Headphones)
Not Working :
None
Procedure :
1. Download the Rom and gapps and copy both files in to sd card or ext-sd.
2. Reboot into recovery
3. wipe cache, dalvik cache, data...
4. Install both rom and gapps.
5. Reboot phone...
I am not responsible for bricked devices.
Credits:
Xda
Cyanogenmode team
Pac-man developers
Mokee developers,
@LiquidPlacidity
JKaz
@Jamil69
@umangleekha (For Headphone fix patch)
I take credit only for porting this rom to our device, but i don't take credit any other way...
ROM Download
Gapps
For root access flash zip file from the link
SuperSu
Click to expand...
Click to collapse
Thanks for this cusrom bro, i will try it.
There's a nfc wakelock and Systemupdateservice wakelock. Other than that the rom is functional.
Thanks bro, this runs better than mokee and doesn't have shady apps.
screenshot plz...
So far everything works fine.
Bugs:
1) Everytime Wi-Fi is turned on, PAC Console forced close.
2) The resoulution is kinda small & look like tablet.
Maybe I can tweak the build.prop about the resolution.
I can confirm what zahinasaur wrote:
1) PAC Console force closes, but for me, on each boot, but after I disabled it in Manage Apps, it's OK.
2) Resolution looks strange, but it's also OK.
3) New thing: isn't App2SD functionality enabled on this ROM? Can you please package a new version with this functionality enabled?
Besides these, it's works much better than Mokee ROM at least for me, so thank you for your work!
Resolution fix
Just edit the build.prop, find the line:
ro.sf.lcd_density
Change the value & reboot.
Mine works best at value 320. You can try different value.
Thank you, this works. I'm more happy with the 296 setting, but you wrote the correct solution for this problem.
2 problems left.
By the way, not installing SuperSU gives you the default (CM?) SU implementation which works better at least for me, for e.g. BusyBox installation.
1st post updated...
headphone fix
asrupesh said:
1st post updated...
Click to expand...
Click to collapse
Is the headphone fix included in the rom or I have to flash something for it?
and what about system update service bug? - for this I have a solution
download my android tools from play store
in service tab -> system -> google play services -> at the end of the list there is system update service, just disabling it worked for my old phone, which had similar bug...
Hope this helps..
whats new??
Guys, do you see the external SD card?

Viper OS custom Rom for InnJoo i2 [Nougat 7.1_ViperOS 3.1.1]

Viper OS ROM 3.1.1 - 7.1 N BETA
For InnJoo i2 [DUAL SIM FUNCTIONAL]​
I am not the original developer so I do not take any credit in making this ROM
This ROM has been powered by the developer team who made this ROm
the original ROM can be found at / from - http://techboxlab.com/mt6592-nougat-7-1-viper-os-custom-rom/
Instructions :-
1. Please use only Philz or TWRP recovery, havnt checked on CWM
2. Please have a full nandroid backup of your current rom before you flash
3. Copy ROM & GAAPs on SD Card
4. Please ensure you are doing a clean install of the rom. Check advance wipe/Erase all, except SD card
5. After install the ROM,flash GAAPS and then let the ROM boot up.
6. Let the ROM boot up, it will take 6-8 minutes. Once it boots up you will see optimizing apps screen notification.
7. After boot up, set the device and SD card (in MM +above Roms, you need to check approve access for SD card)
8. You can install Xposed zip and other Mods you feel fit. (Plz ensure system space is available)
9. Happy flashing
Below is the link for the ROM
https://drive.google.com/open?id=1mEXOy1gwS83CqlAMJIkDH2QLo075TrO0
GAAPS
OpenGaaps arm_7.1 (pico recommended)
Please feel free to visit and thank the developer
No Bugs
USSD code is working
SMS working
3G working
Stock Camera (Front& Back) working - sometimes
Footej Camera included
Greenify included
Xposed installer included
Substratum included
YouTube working
Ok Google Mic is working
Off Mode charging is working
Battery removal, changing sims, low battery off will not result in Boot loop so no more wipe cache required
Let me know if someone is unable to flash or has any other issues/bugs
PO: For Root, please install SuperSU separately after flashing ROM
I can't found any gapps plss provide the link plss
Not working on innjoo i2

Ridon OS ROM - 7.1 N For InnJoo i2

Ridon OS ROM - 7.1 N
For InnJoo i2 [DUAL SIM FUNCTIONAL]
I am not the original developer so I do not take any credit in making this ROM
This ROM has been powered by the developer team who made this ROm
the original ROM can be found at / http://techboxlab.com/ridon-os-rom-for-mt6592-kernel-3-4-67/
Instructions :-
1. Please use only Philz or TWRP recovery, havnt checked on CWM
2. Please have a full nandroid backup of your current rom before you flash
3. Copy ROM & GAAPs on SD Card
4. Please ensure you are doing a clean install of the rom. Check advance wipe/Erase all, except SD card
5. After install the ROM,flash GAAPS and then let the ROM boot up.
6. Let the ROM boot up, it will take 6-8 minutes. Once it boots up you will see optimizing apps screen notification.
7. After boot up, set the device and SD card (in MM +above Roms, you need to check approve access for SD card)
8. You can install Xposed zip and other Mods you feel fit. (Plz ensure system space is available)
9. Happy flashing
Below is the link for the ROM
https://drive.google.com/open?id=16QEtp8-byFvHLaSpocC629w3tylRkifO
GAAPS
OpenGaaps arm_7.1 (pico recommended)
Please feel free to visit and thank the developer
No Bugs
USSD code is working
SMS working
3G working
Greenify working
Xposed installer working
Substratum working
YouTube working
Ok Google Mic is working
Off Mode charging is working
Battery removal, changing sims, low battery off will not result in Boot loop so no more wipe cache required
Issues
Stock Camera (Front& Back) is a Hit or a Miss. Not working at times
Let me know if someone is unable to flash or has any other issues/bugs
PO: For Root, please install SuperSU separately after flashing ROM

There is an internal problem in your device. Please contact your manufacturer.

Hello everyone!
Pls help me on this one...
I have:
- unlocked Boot loader
- installed Twrp 3.2.1 vendor patch
- installed Magisk 16.0
- flashed DotOs 2.4 treble ROM
- installed Franco kernel (fk6)
on my Redmi Note 4 (mido).
The problem is:
- whenever I reboot my device a message appears from DotOs System which says: There is an internal problem in your device. Please contact your manufacturer.
- whenever I play Pubg mobile, my phone usually reboots... And these random reboots occur not only in pubg but also in other apps if I try to multitask or click the buttons fastly or try to use my phone very quickly.
Please help me guys.
-Thank You:good:
Shoury_Jain55 said:
Hello everyone!
Pls help me on this one...
I have:
- unlocked Boot loader
- installed Twrp 3.2.1 vendor patch
- installed Magisk 16.0
- flashed DotOs 2.4 treble ROM
- installed Franco kernel (fk6)
on my Redmi Note 4 (mido).
The problem is:
- whenever I reboot my device a message appears from DotOs System which says: There is an internal problem in your device. Please contact your manufacturer.
- whenever I play Pubg mobile, my phone usually reboots... And these random reboots occur not only in pubg but also in other apps if I try to multitask or click the buttons fastly or try to use my phone very quickly.
Please help me guys.
-Thank You:good:
Click to expand...
Click to collapse
This is caused due to franco kernel on an older patch. Nothing really worth worrying about.
MyNameIsRage said:
This is caused due to franco kernel on an older patch. Nothing really worth worrying about.
Click to expand...
Click to collapse
Umm okay, so what should I do now? By the way, thanks...
Shoury_Jain55 said:
Umm okay, so what should I do now? By the way, thanks...
Click to expand...
Click to collapse
I wouldn't trust my life (android device) on franco kernel for now. If I were you I'd download latest Lineage Rom, latest gapps, Magisk vcustom version that supports treble enabled roms, then kud kernel. Put them on an external sd or file storage, completely wipe my phone except the external part of it, then flash them in the said order. Franco kernel been updated quite a while ago. Since then lots of things have changed in the aosp based roms. The kernel might cause those problems of yours. Also first of all, before doing anything I'd flash latest Orange Fox Treble enabled recovery R6 beta, which solves some flashing issues. This is what I'd do to solve those problems of yours within 10 minutes. But it's just me, a purist being real and being safe than sorry.
greenys' said:
I wouldn't trust my life (android device) on franco kernel for now. If I were you I'd download latest Lineage Rom, latest gapps, Magisk vcustom version that supports treble enabled roms, then kud kernel. Put them on an external sd or file storage, completely wipe my phone except the external part of it, then flash them in the said order. Franco kernel been updated quite a while ago. Since then lots of things have changed in the aosp based roms. The kernel might cause those problems of yours. Also first of all, before doing anything I'd flash latest Orange Fox Treble enabled recovery R6 beta, which solves some flashing issues. This is what I'd do to solve those problems of yours within 10 minutes. But it's just me, a purist being real and being safe than sorry.
Click to expand...
Click to collapse
Wow. Thanks, I would definitely try those...
greenys' said:
I wouldn't trust my life (android device) on franco kernel for now. If I were you I'd download latest Lineage Rom, latest gapps, Magisk vcustom version that supports treble enabled roms, then kud kernel. Put them on an external sd or file storage, completely wipe my phone except the external part of it, then flash them in the said order. Franco kernel been updated quite a while ago. Since then lots of things have changed in the aosp based roms. The kernel might cause those problems of yours. Also first of all, before doing anything I'd flash latest Orange Fox Treble enabled recovery R6 beta, which solves some flashing issues. This is what I'd do to solve those problems of yours within 10 minutes. But it's just me, a purist being real and being safe than sorry.
Click to expand...
Click to collapse
Bro noting hepled me... What's should I do now, it was working fine for a few days but now I m back with the same problem...
Shoury_Jain55 said:
Bro noting hepled me... What's should I do now, it was working fine for a few days but now I m back with the same problem...
Click to expand...
Click to collapse
Did you try everything I wrote above? These steps should work in case you badly messed up your system. I mean, I fiddle and meddle with my OS all the time, often rendering my phone unusable. As much that I have to clean wipe and reinstall the whole OS following the steps I provided. There was no case when a whole, system wide wipe and a clean install wouldn't solve.
greenys' said:
Did you try everything I wrote above? These steps should work in case you badly messed up your system. I mean, I fiddle and meddle with my OS all the time, often rendering my phone unusable. As much that I have to clean wipe and reinstall the whole OS following the steps I provided. There was no case when a whole, system wide wipe and a clean install wouldn't solve.
Click to expand...
Click to collapse
Yep...
Installed lineage 15.1
Kud kernel
Magisk 16.7
Orange fox recovery
Still it redboots randomly sometimes...
Shoury_Jain55 said:
Yep...
Installed lineage 15.1
Kud kernel
Magisk 16.7
Orange fox recovery
Still it redboots randomly sometimes...
Click to expand...
Click to collapse
Perhaps I can give you one more tip that you can try.
First, if you have an external SD card make sure to copy latest stable global MiUi ROM, latest Lineage OS for mido, latest open gapps, kud kernel, Magisk 16.0 treble enabled and orange fox onto it. If not then download these to your pc or laptop.
1) Make a full wipe including system, data, vendor, cache, dalvik and internal storage.
2) From TWRP flash latest MiUi stable global rom.
(if you have external SD do it from there, if you don't, since you made a full wipe, your internal SD is empty. Through USB sideload copy MiUi onto your internal SD and flash it from there if you don't have an external SD with the flashable zips on it)
3) Boot up the system, make sure everything is working.
4) Reboot to TWRP and do a full wipe again.
5) Flash Lineage OS from your external SD or copy the required zip onto your internal SD through USB sideload.
6) Now flash latest gapps (pico is far enough)
7) Flash Kud Kernel
8) Flash Magisk 16.0 treble enabled or magisk vcustom, they are the same but more stable than 16.7 which is still beta.
9) Reboot to system and see for yourself if everything is working.
I hope this solves your problem. Sometimes if you flash back MiUi it solves some crash perhaps firmware related problems. I don't know but this helped me a few times. If you messed up something USB sideload is always an option to copy any flashable zip onto your internal SD, however I always use external SD for it's easy to trust and use.
In case your data/internal SD shows 0 kb/mb free space do a data wipe and a partition from special settings in TWRP with all sizes set to 0.
I don't have any more tips to help you. Sorry.
I would say get Orangefox or Redwolf recovery if you dont have them already. Try flashing any rom and see if your problem persists,if not flash magisk and custom kernels. With the process of elimination you should know the source of the problem which i think is francokernel as it was mentioned.
greenys' said:
Perhaps I can give you one more tip that you can try.
First, if you have an external SD card make sure to copy latest stable global MiUi ROM, latest Lineage OS for mido, latest open gapps, kud kernel, Magisk 16.0 treble enabled and orange fox onto it. If not then download these to your pc or laptop.
1) Make a full wipe including system, data, vendor, cache, dalvik and internal storage.
2) From TWRP flash latest MiUi stable global rom.
(if you have external SD do it from there, if you don't, since you made a full wipe, your internal SD is empty. Through USB sideload copy MiUi onto your internal SD and flash it from there if you don't have an external SD with the flashable zips on it)
3) Boot up the system, make sure everything is working.
4) Reboot to TWRP and do a full wipe again.
5) Flash Lineage OS from your external SD or copy the required zip onto your internal SD through USB sideload.
6) Now flash latest gapps (pico is far enough)
7) Flash Kud Kernel
8) Flash Magisk 16.0 treble enabled or magisk vcustom, they are the same but more stable than 16.7 which is still beta.
9) Reboot to system and see for yourself if everything is working.
I hope this solves your problem. Sometimes if you flash back MiUi it solves some crash perhaps firmware related problems. I don't know but this helped me a few times. If you messed up something USB sideload is always an option to copy any flashable zip onto your internal SD, however I always use external SD for it's easy to trust and use.
In case your data/internal SD shows 0 kb/mb free space do a data wipe and a partition from special settings in TWRP with all sizes set to 0.
I don't have any more tips to help you. Sorry.
Click to expand...
Click to collapse
Still didn't work
Maybe there is some hardware problem...
Well, thanks for the help! ?
Shoury_Jain55 said:
Still didn't work
Maybe there is some hardware problem...
Well, thanks for the help!
Click to expand...
Click to collapse
Oh, well. Perhaps you're right. I do this every week and works. I'm sorry I couldn't help you.
Shoury_Jain55 said:
Hello everyone!
Pls help me on this one...
I have:
- unlocked Boot loader
- installed Twrp 3.2.1 vendor patch
- installed Magisk 16.0
- flashed DotOs 2.4 treble ROM
- installed Franco kernel (fk6)
on my Redmi Note 4 (mido).
The problem is:
- whenever I reboot my device a message appears from DotOs System which says: There is an internal problem in your device. Please contact your manufacturer.
- whenever I play Pubg mobile, my phone usually reboots... And these random reboots occur not only in pubg but also in other apps if I try to multitask or click the buttons fastly or try to use my phone very quickly.
Please help me guys.
-Thank You:good:
Click to expand...
Click to collapse
Wrong forum.
Go to DotOs forum, and ask your question.
Mybe your rom not compatible for mido.
Shoury_Jain55 said:
Yep...
Installed lineage 15.1
Kud kernel
Magisk 16.7
Orange fox recovery
Still it redboots randomly sometimes...
Click to expand...
Click to collapse
Probably Cpu throttling service asks for increase in cpu frequency due to the requirement , but when the cpu frequency is scaled up high , but due to some internal problem (temperature sensor failure or faulty processor etc...) the temperature detected is too high that the phone reboots.
TBH I have no idea about how android devices work but this happens on PS4 due to burnt capacitors , this can be fixed sometimes.
Buddy I will help u...
Just download the build.prop editor from playstore and grant root permission and search for ro.treble.enabled line and change it to false:fingers-crossed:
rc chanu said:
Buddy I will help u...
Just download the build.prop editor from playstore and grant root permission and search for ro.treble.enabled line and change it to false:fingers-crossed:
Click to expand...
Click to collapse
Thank you bro, works for me.
Very nice!!!

ROM MIUI 11 Q GSI ARM64 FOR J7Pro (fixed sim cards) work good No more update

​
What does fingerprint, brightness, camera and searchlight not work?
Soon reform and integration
Quote:
Warning :
Advice for everyone, no one uses a Project_Spaget X or 3.0 or old Do not use it with any gsi Except for pixels
Because you will notice a lot of problems with it, even if it is
He repaired it
Because I repaired and added files from Xiaomi
I think that if Astmrr society here will take the fittest and suits him for himself
Everything links has been deleted because it violates Forum Law No. 12
must read
Because I modified the work of a person
His work corrected him, with a lot of things being deleted
It is not enough to add his name to the topic
As for some of the last links, they were deleted
Because she was making very little profit from her
* This violates the forum rights
So bye guys
:good:
it May Take some time after go to wipe:select dalvik/art and cache and reboot to recovery​
2) Extract Our Mine.ZIP and copy it TO Recovery Restore Click on the file Our Mine.ZIP and swipe to Restore Swipe to Restore ReboOt to System​
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Everything has been deleted because it violates Forum Law No. 12
Because I modified the work of a person
His work corrected him, with a lot of things being deleted
It is not enough to add his name to the topic
So bye guys
:good: Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here.
Please take caution and be aware of what you are doing. And Always backup !
1) INSTALL Create vendor​ 2) INSTALL SpagetX​ 3) Wipe Data, Cache e System
4) INSTALL GSI MIUI 11 mod edit - link removed
5) INSTALL Permissiver_v5 about It is not important, but if a problem occurs during the logo, install it
6) INSTALL Magisk v20.3 for J7 Pro only
7) INSTALL ingle Sim Patch importan TO FIX SIM​ Thank u @tom.android about this steps​
9. Reboot (the fist time boot --hello MIUI 11 CN
Not set wifi --No online during setup android.
10. Enable Developer mode set DPI ( Smallest width about 600 or any ...up to you )
-setup Fingerprint
-make Lock screen shot-cut on home-screen
-setting-->Home Screen Menu
set Swip up on the Home screen to = None
set App vault = Disable
-open wifi
-Flash Fix Treble Sound mod edit - link removed
-New Fix System sound cracked " fixaudiogsi.zip"
mod edit - link removed
------------
About this step will fail not do this after i fix it
Make CN to EN
11. Install EdXposed
Magisk Manager install below mods
-Riru-Core (Magisk Mod)
-Riru-EdXposed YAHFA (Magisk Mod)
-EdXposedManager.apk
Edxposed Manager -- install below mod
-HiddenCore (com.cofface.ivader) ---xposed mod
-MIUI Anesthetist
More Debloated by yourself
12.Install Root Explorer (Root) or any you like
-Delete System Apps ( forbidden to delete such as..)
/System/app/MiuiSuperMarket
/System/app/Updater
Etc.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
House keeping This step is not important if you want
---Fix sound bug .( by install Viper4A)
**How to install Viper4A with Android 10/Q
1.Download ROOTLESS DRIVER INSTALLER " v4afx-rootless_08.18.2019.zip" from here
https://zackptg5.com/android.php#viper
2.Flash " " v4afx-rootless_08.18.2019.zip"
3.Download archive ViPER4Android.rar extract to your phone storage
.Open and run v4a.apk from inside ViPER4Android folder.
4.open Magisk manager install Audio Modification library and restart
-If your launcher starts to flick on startup, flash that: Google Drive
(https://drive.google.com/file/d/1bWC...ew?usp=sharing)
Just flash if launcher flicks on first boot
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Fix error " Android System: your vendor image does not match the system......." Not tested this step not do it
-edit (system/vendor----> bulid prop)
change line " ro.vendor.build.fingerprint = xxx to ro.build.fingerprint=xxx
and/or
-edit (system ---> bulid prop)
change " ro.treble.enabled=true" to " ro.treble.enabled=false"
- reboot
END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
I The tested successful wOrk GOOD All​ Everything except Smart View I will fix it SOON And look for a solution and Fingerprint not work on q soon will fix it​
How Install it (MiRoom) MIUI 11 Q​
1) INSTALL Create vendor​ 2) INSTALL SpagetX​ 3) Wipe Data, Cache e System
4) INSTALL GSI MIUI 11 MiRoom
5) INSTALL CronosKernel-V5.0-Treble
6) INSTALL Permissiver_v5 about It is not important, but if a problem occurs during the logo, install it
7) INSTALL Magisk v20.3 for J7 Pro only
8) INSTALL ingle Sim Patch​
After Restart to system and open
-iNSTALL APK Play Services
-iNSTALL APK Play Store
This Q Android 10 https://sourceforge.net/projects/zj...om-Aonly-10-20191115-GSI.img-2303.7z/download Thank U Get the Link Rom @hacker812cFoR And Thank U @ZJRDroid Credits to @ZJRDroid developer of this custom rom (I recommend it) Fingerprint not work on q soon will fix it​
5) Fix Fingerprint mod edit - link removed only for pin and try it with q if work tell me​
##) GSi Sim Patch to Fix Sim Card will work mod edit - link removed Thank U Gamer Pro He did not help me But I took his file And I test it to all gsi only Aonly and not test for ab for pin gsi and q gsi
7) CronosKernel u can download it from xda Thank u @ananjaser1211​
Google Play Services APK:
mod edit - link removed
I really got tired a lot and tried a lot and adjusted some things in the ROM in GSI
screenshots? go to this about sim card work
https://www.facebook.com/photo.php?fbid=1551641314991093&set=a.102624916559414&type=3&theater
screenshots?
May Ahmed said:
Wow Nice I saw your screenshots about rom (MiRoom) , but where screenshots about rom (miuiMiX)
https://www.facebook.com/photo.php?fbid=1551572734997951&set=pcb.1551574014997823&type=3&theater
some time open link some time not open
Hey post screenshots on any site other not this facebook
Click to expand...
Click to collapse
Thank u Okay wait
Very nice :good: But with Gapps I have some annoying with Google Play Services, this alway stopping after install
NindoS said:
Very nice :good: But with Gapps I have some annoying with Google Play Services, this alway stopping after install
Click to expand...
Click to collapse
-Install APK Play Services
-Install APK Play Store
Will work good NOT stopping after install again If you are talking about MiuiMiX pin MIUI 11 (Still under test)
and about MiRoom work good i Tested work good Just not work fingerprint and smart view
Thanks for the support my friend @NindoS
I know because of integration problems occur Gapps with rom and not good
I will get rom without Gapps and Users are using my file Gapps after editing I will amend it more
for magisk safe mode soon
Nice work ......
hello. I have a few questions. do these sim card fixes work on Galaxy j5 2017 and Will both sim cards work?
vytska69 said:
hello. I have a few questions. do these sim card fixes work on Galaxy j5 2017 and Will both sim cards work?
Click to expand...
Click to collapse
Yes ,I think so will work 90% , but try it if you like and tell me work or not Because I do not have this phone Galaxy j5
only one sim card works
vytautas322 said:
only one sim card works
Click to expand...
Click to collapse
Everything except the fingerprint and no fm radio and smart view soon i will fix it
But you can use the fingerprint security app from Google Play Store
my partition is damaged every time the gsi flashes
Our Mine said:
Yes ,I think so will work 90% , but try it if you like and tell me work or not Because I do not have this phone Galaxy j5
Click to expand...
Click to collapse
Does sim fix can also use for J730g so work on both sim?
I am using this now MiRoom very fast and cool, but fingerprint and engraving is really a problem , what about MIUI-Aonly-10-20191117-GSI.img-0001 what is the difference
this rom has problems. not working two sim cards, not working flashlight. I installed resurrection remix 7.0.2. I'm waiting for you to fix the errors. thank you
---------- Post added at 11:06 PM ---------- Previous post was at 11:05 PM ----------
By the way, hotspot doesn't work
Wow. MiUi 11 Q on j7pro. Great job. I hope all will be fixed.
Beautiful and fast But I returned to Android 9 Because this rom has many problems ,,,But really a good work, keep working on fixing it , I am waiting
gsi link does not exist
Edenilson10 said:
gsi link does not exist
Click to expand...
Click to collapse
https://drive.google.com/open?id=1fSLW6yE5Wk-AW4lYD9CVv6MtP9DdP4KA
no wifi
hello i tested in j5 pro perfect fonctionnal
-problem
no wifi connecting
thank
on j7 2016 will work?

Categories

Resources