THIS THREAD IS DISCONTINUED - AM GETTING TOO OLD TO CONTINUE WETAmod FOR T295
I see people still trying to patch files to get root.
If you flash the TWRP posted by @Talich52, with reboot unchecked you can install Magisk from TWRP.
Tested on T295XXU3BUC3 ROM (Android 10)
PREREQUISITES:
Bootloader unlocked - search forums.xda-developers for instructions how to do this.
OEM unlock on. In Settings/developer options, OEM Unlock slider should be to the right.
INSTRUCTIONS:
1. If prerequisites met: install Android 9 bootloader through ODIN (See attachement: Unzip BL*.zip FIRST)
If on Android 9, go to step 3.
2. Reboot to system
3. Go into download mode.
4. Open ODIN and in the AP slot put TWRP (see attachment below) (Unzip FIRST)
5. Uncheck auto reboot
6. Flash TWRP
7. Press vol dn + pwr keys.
8: When screen goes blank, press vol up + pwr keys.
9. Keep holding down both keys after reboot.
10. Tablet will reboot again.
11. When Samsung logo appears stop pressing pwr key.
12. When bootloader msg appears, release vol up key, quickly press & release pwr key, and quickly press & hold vol up key until in TWRP.
13. Install Fix_vendor_9.0.zip or Fix_vendor_10.0.zip. (Based on installed OS)
See attached files.
14. Clear dalvik/cache if prompted
15. You will then format (NOT WIPE) data. Answer yes to the format prompt
16. Clear dalvik and cache.
17. Reboot back into recovery.
18. Install magisk - see attached
19. Reboot into system. System may reboot again - that's okay
20. Enjoy!!
WETAmod: (For Android 10 ONLY)
I have attached a zip file which will add 3Minit Battery, alternate battery options, 3Minit Clock & Network Meter options to the status bar. There are other options inn the WETAmod package. I have tested all the options and they should all work.. Also includes reboot, download, recovery, shutdown tiles for the taskbar dropdown menu (check buttons). On the audio options page, there are instructions for installing Viper4Android - Please READ CAREFULLY.
The original WETAmod package was developed by @Mentalmuso. He kindly allowed me to post my modified version for the SM-T295 on this forum.
IMPORTANT:
The WETAmod*.zip file HAS TO BE INSTALLED in Magisk Manager.
1. At the bottom of Magisk Manager, you will what looks like a puzzle piece on the right side. Press it. (attachment MM-1.png)
2. At the top of the Modules page, press 'Install from Storage'
3. Find & select the WETAmod_T295_1.zip on your tablet's storage.
4. Installation info will be displayed during install.
5. Reboot
6. In the Apps Drawer, launch the WETAmod app. You can browse the options from the menu
NOTE:
If the 3MinitBatterySettings is not downloading the battery styles, reinstall the 3MinitBatterySettings.apk. You can extract it from the WETAmod zip file.
WETAmod_T295_BUC3.zip
WETAmod_T295_BUC8.zip
WETAmod_T295_BUD3.zip
WETAmod: (For Android 11 ONLY)
I have attached a zip file which will add 3Minit Battery, alternate battery options, 3Minit Clock & Network Meter options to the status bar. There are other options inn the WETAmod package. I have tested all the options and they should all work.. Also includes reboot, download, recovery, shutdown tiles for the taskbar drop down menu (check buttons). On the audio options page, there are instructions for installing Viper4Android - Please READ CAREFULLY.
The original WETAmod package was developed by @mentalmuso. He kindly allowed me to post my modified version for the SM-T295 on this forum.
IMPORTANT:
The WETAmod*.zip file HAS TO BE INSTALLED in Magisk Manager.
1. At the bottom of Magisk Manager, you will what looks like a puzzle piece on the right side. Press it. (attachment MM-1.png)
2. At the top of the Modules page, press 'Install from Storage'
3. Find & select the WETAmod_*.zip on your tablet's storage.
4. Installation info will be displayed during install.
5. Reboot
6. In the Apps Drawer, launch the WETAmod app. You can browse the options from the menu
NOTE:
If the 3MinitBatterySettings is not downloading the battery styles, reinstall the 3MinitBatterySettings.apk. You can extract it from the WETAmod zip file.
WETAmod_CUF7_T295.zip (Chinese ROM)
WETAmod_CUF8_T295.zip (Russian ROM)
WETAmod_CUG2_T295.zip (German ROM)
WETAmod_CUG4_T295.zip (Vietnam ROM)
WETAmod_CUK4_T295.zip (Vietnam ROM)
WETAmod_CUK5_T295.zip (Chinese ROM)
just got a 295, I'm downloading stock T295XXU3BUC3 now. It came with T295XXU3BTI4. I'm not taking any chances, LOL.Thanks for the share gcrutchr.
I got it all working!!! Nice work brother
kb5rir said:
I got it all working!!! Nice work brother
Click to expand...
Click to collapse
Thank you!
Updated the WETAmod zip file to include other battery options, 3Minit Clock, and installing Viper4Android.
Added ***NEW*** WETAmod for BUC8 ROM.
Added ***NEW*** WETAmod for BUD3 ROM.
Hi! Great work! Got root and twrp on buc3.
I'm really interested with custom roms, since I got twrp I tried lineageos 17.1 gsi but it goes into bootloop. I tried following various instructions from everywhere in the internet but to no avail.
Recently, I saw ur conversation with secretwolf and that he claimed he was able to flash gsi roms. Since there is not much difference between 290 and 295, I think it's not too far fetched to have a custom rom flashed on the 295.
Do you have any ideas on how to go about it? Thanks!
lwrncslcd said:
Hi! Great work! Got root and twrp on buc3.
I'm really interested with custom roms, since I got twrp I tried lineageos 17.1 gsi but it goes into bootloop. I tried following various instructions from everywhere in the internet but to no avail.
Recently, I saw ur conversation with secretwolf and that he claimed he was able to flash gsi roms. Since there is not much difference between 290 and 295, I think it's not too far fetched to have a custom rom flashed on the 295.
Do you have any ideas on how to go about it? Thanks!
Click to expand...
Click to collapse
I have been staying with Samsung roms for now. I may try LineageOS in the future. But, to answer your question, maybe try and clear the data partition
This looks amazing I have a tablet on order and wish to do this.
May I please ask, once magisk is installed is that rooted done, or do I need to activate/configure magisk to root or install a module into it please (only used supersu before so unsure of magisk).
Thank you
Alex
Just to make sure - this will ONLY work for SM-T295, correct? SM-T290 is SOL?
detroitredwings said:
Just to make sure - this will ONLY work for SM-T295, correct? SM-T290 is SOL?
Click to expand...
Click to collapse
When you say 'this', what do you mean?
Rooting works for T290. Maybe WETA mod works. WETAmod uses the SystemUI.apk file only.
gcrutchr said:
When you say 'this', what do you mean?
Rooting works for T290. Maybe WETA mod works. WETAmod uses the SystemUI.apk file only.
Click to expand...
Click to collapse
By "this" I mean the thread headline "TWRP - ROOT - WETAmod for SM-T295 (Tab A 8.0 2019)[Updated Apr 20 2021]" and files/instructions. Just wanted to confirm it's not meant for model SM-T290.
detroitredwings said:
By "this" I mean the thread headline "TWRP - ROOT - WETAmod for SM-T295 (Tab A 8.0 2019)[Updated Apr 20 2021]" and files/instructions. Just wanted to confirm it's not meant for model SM-T290.
Click to expand...
Click to collapse
It is meant for what it says: SM-T295
gcrutchr said:
I see people still trying to patch files to get root.
If you flash the TWRP posted by @Talich52, with reboot unchecked you can install Magisk from TWRP.
Tested on T295XXU3BUC3 ROM (Android 10)
PREREQUISITES:
Bootloader unlocked - search forums.xda-developers for instructions how to do this.
OEM unlock on. In Settings/developer options, OEM Unlock slider should be to the right.
INSTRUCTIONS:
1. If prerequisites met: install Android 9 bootloader through ODIN (See attachement: Unzip BL*.zip FIRST)
If on Android 9, go to step 3.
2. Reboot to system
3. Go into download mode.
4. Open ODIN and in the AP slot put TWRP (see attachment below) (Unzip FIRST)
5. Uncheck auto reboot
6. Flash TWRP
7. Press vol dn + pwr keys.
8: When screen goes blank, press vol up + pwr keys.
9. Keep holding down both keys after reboot.
10. Tablet will reboot again.
11. When Samsung logo appears stop pressing pwr key.
12. When bootloader msg appears, release vol up key, quickly press & release pwr key, and quickly press & hold vol up key until in TWRP.
13. Install Fix_vendor_9.0.zip or Fix_vendor_10.0.zip. (Based on installed OS)
See attached files.
14. Clear dalvik/cache if prompted
15. You will then format (NOT WIPE) data. Answer yes to the format prompt
16. Clear dalvik and cache.
17. Reboot back into recovery.
18. Install magisk - see attached
19. Reboot into system. System may reboot again - that's okay
20. Enjoy!!
WETAmod: (For Android 10 ONLY)
I have attached a zip file which will add 3Minit Battery, alternate battery options, 3Minit Clock & Network Meter options to the status bar. There are other options inn the WETAmod package. I have tested all the options and they should all work.. Also includes reboot, download, recovery, shutdown tiles for the taskbar dropdown menu (check buttons). On the audio options page, there are instructions for installing Viper4Android - Please READ CAREFULLY.
The original WETAmod package was developed by @Mentalmuso. He kindly allowed me to post my modified version for the SM-T295 on this forum.
IMPORTANT:
The WETAmod*.zip file HAS TO BE INSTALLED in Magisk Manager.
1. At the bottom of Magisk Manager, you will what looks like a puzzle piece on the right side. Press it. (attachment MM-1.png)
2. At the top of the Modules page, press 'Install from Storage'
3. Find & select the WETAmod_T295_1.zip on your tablet's storage.
4. Installation info will be displayed during install.
5. Reboot
6. In the Apps Drawer, launch the WETAmod app. You can browse the options from the menu
NOTE:
If the 3MinitBatterySettings is not downloading the battery styles, reinstall the 3MinitBatterySettings.apk. You can extract it from the WETAmod zip file.
WETAmod_T295_BUC3.zip
WETAmod_T295_BUC8.zip
WETAmod_T295_BUD3.zip
Click to expand...
Click to collapse
My T295 currently in T295XXU4BUD3 please help me out for root i cant install TWRP
Rafeeknm said:
My T295 currently in T295XXU4BUD3 please help me out for root i cant install TWRP
Click to expand...
Click to collapse
This method not worked for me please update root and custom recovery solution for T295XXU4BUD3
@Talich52 @gcrutchr sir we need root method of U4 bootloader....we just updated out T295....help us plz
@
Plz help us, we updated via OTA,now we cant get root
Plz
@gcrutchr
It surfaced at EFTSU page a file for T295XXU4BUD5, "SM-T295_T295XXU4BUD5_10_567dd.9EFT", but i'm burned off so many reinstalls so I'm just putting this information here.
crudebuster said:
It surfaced at EFTSU page a file for T295XXU4BUD5, "SM-T295_T295XXU4BUD5_10_567dd.9EFT", but i'm burned off so many reinstalls so I'm just putting this information here.
Click to expand...
Click to collapse
what were u doing?
Related
This device is more reasonable to buy as it is small and elegant at a decent price.
It is IP68 water-friendly device and the display is much better - higher FPS than on higher resolution OLEDs - good for action games.
Root using CF-autoroot
Download the file from CF-auto-root repository:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
If you have Nougat or after update to Android 7.0:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
Wipe data + cache before
Flash CF-autoroot before device initial configuration
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
Click to expand...
Click to collapse
Unzip the file
Run Odin from the unzipped folder
Browse by clicking AP button the *.md5 file from the unzipped folder
Connect the A320F in download mode (start the device by holding Power+Home+Volume DOWN)
After starting the device in download mode, press Volume UP one to allow the download
A new COM port should be recognized by Odin after the device is connected via USB
Press Start button in in Odin
Rooting will take place automatically and the device will restart twice.
After the first restart you can disconnect the cable from the PC.
Second restart might take a few minutes.
After that you will find the SuperSU app installed.
Other, more complicated methods:
Rooting using custom recovery:
You will need:
SM-A320F with Exynos CPU (waiting for updates on other model)
Android Marshmallow 6.0.1 on your device
Odin v3.0.4 (download link below)
Team Win Recovery Project - TWRP (download link here) or ClockWork Mod Custom Recovery - CWM (download link below)
(Recommended custom recovery: Team Win Recovery Project :good: - more features, newer, works better)
SuperSU-v2.79-201612051815 (latest ZIP version available today - download link below)
SM-A320F TWRP & CWM recovery installation procedure:
On your device enable developer options and then disable OEM lock (FRP lock) for the device to allow you to flash custom recovery
(Activate OEM unlock from developer options menu)
Boot your device in Odin downlaod mode (hold VolDOWN + Home + Power)
Flash the *.tar file of TWRP or for the CWM using Odin's PDA option
(Uncheck Auto Reboot and F. Reset Time)
Force reboot your device (hold VolDOWN + Power for 10 seconds)
SM-A320F SuperSU ZIP installation procedure:
Copy SuperSU-v2.79-201612051815.zip on a microSD card (trough USB data cable or any other method)
Unplug the USB data cable from the phone and shut down the device
Start your device in Recovery mode (Hold VolUP + Home + Power)
(RECOVERY IS NOT SEANDROID ENFORCED - this warning is normal when booting into CWM custom recovery but not with TWRP)
The recovery menu will appear
> Using TWRP Recovery:
Swipe to allow modifications
Tap on Install
Tap on Select Storage at the bottom and select MicroSDCard then tap OK
Browse for the SuperSU-v2.79-201612051815.zip and tap on it to install it
Swipe to install SuperSU (confirm Flash)
> Using CWM Recovery:
Select Install zip update package (use VolDOWN/VolUP to navigate and Power to select)
Select Choose zip from sdcard
Select SuperSU-v2.79-201612051815.zip and press Power to install Super SU
The installation will perform automatically and the device will reboot twice.
First reboot will take longer. Please be patient. After the second reboot you will have SuperSU and root.
Downsides/bugs:
Knox will be tripped the second you flash a custom recovery (Warranty void: 1 - non reversibile)
(That means that you will lose the warranty for your device and that can not be changed)
(Perhaps that's why I personally can't invest more than $300 in a Samsung cellphone ever)
You won't be able to use Knox-related functions including Secure Folder ever again
Because of a SuperSU bug you won't be able to use Smart View (Miracast, project the screen to smart TV) unless you make an edit as follows:
Lewdog45 said:
Use a file browser such as Root Browser and go to the root of your device then locate the "System" folder and find build.prop and edit it with any application that can edit it and find the bottom line, right at the edge of the bottom line you need to press enter twice and then paste this:
wlan.wfd.hdcp=disable
And then save it and reboot your device.
Click to expand...
Click to collapse
Special thanks to: ashyx for compiling and updating TWRP recovery for SM-A320F and to XN Logos for providing compatible CWM recovery with SM-A320F.
Please feel free to post your attempts on rooting this device and the results. If other methods will show-up I will include them up here.
jnflos said:
Up to this point there is no success in rooting the Galaxy A3 2017 device.
This device is more reasonable to buy as it is small and elegant at a decent price.
Unfortunately there is no sign of working root method for the device.
Please feel free to update this topic with your attempts on rooting this device, and if success will strike, it will float up here for everyone to see.
Click to expand...
Click to collapse
+1
Thanks to developpers
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Here
I tried this morning without succes
copernic75 said:
I tried this morning without succes
Click to expand...
Click to collapse
Why didn't it work? Any errors in Odin?
No error in odin.
When i tried To reboot in revovery mode i don't have access to cmw .. just Android error message + Knox error
XN Logos said:
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Click to expand...
Click to collapse
Thanks! I will test this on my Galaxy SM-A320FL (single sim) to see...
Root was successful! I will update the first post with the mini tutorial and the files needed
REMOVED
I have indeed a a320-FL french model... Exynos inside.
What do you suggest?
jnflos said:
Root was successful! I will update the first post with the mini tutorial and the files needed
Click to expand...
Click to collapse
This cwm worked for Exynos?
tys0n said:
This cwm worked for Exynos?
Click to expand...
Click to collapse
Yes it worked. Please follow the tutorial that I wrote on the first post.
jnflos said:
Yes it worked. Please follow the tutorial that I wrote on the first post.
Click to expand...
Click to collapse
Ok good then I will remove my earlier post. I don't have the device so I can't try it.
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
copernic75 said:
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
Click to expand...
Click to collapse
Format the SD card on your PC using FAT32 option (use an USB adapter).
Copy the zip on the card, Insert it into the phone and reboot into recovery to test.
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
copernic75 said:
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
Click to expand...
Click to collapse
Yes. You can flash twrp in cwm and reboot to recovery. Twrp will be there instead.
wich version to choose?
Sorry. There's no twrp for a320 yet, but in general it's working fine to flash new recovery with existing one.
Hey guys, I will receive my a3 2017 soon and I was wondering if it would be preferable to root it now than waiting for the update to Nougat and re-root it then... Any idea when the update will be available for this phone? I was also wondering if I should use a specific brand or type of micro sd card with this phone?
Thanks
Hi, are you new to installing custom ROMs? you don't know where to start? I didn't either
WELCOME TO MY GUIDE TO INSTALL CUSTOM ROMs (NOOB SPECIAL)Things you need to install a custom ROM:
1. A Grand Prime
2. A PC
3. A Data Transfer Wire
4. Some Time and Patience
5. And A working Brain
First things firstUpgrade to Android 5.0.2 stock from samsung
If you are already on 5.0.2 you can skip this step
If you can't update from the device from the phone use this method
1. Download Odin
https://odindownload.com/download/#.W9Bm1GgzbIU
2. Download the stock firmware from this site for your device
https://samsung-firmware.org/ (note search for your baseband version upto SMG53XXXX (Replace XXXX with your baseband version)
3. Shot down your device
4. Press these Keys at once
VOLUME DOWN+HOME+POWER
5. It will show you a warning sign but get past it by pressing VOLUME UP
6. Plug your device into the computer
7. Start Odin
8. Select PDA and select the extracted Firmware file for your device
9. Select start
10. Wait for the device to reboot
Congratulations on completing the first step :good:
Moving on to installing TWRP
1. Find your device code name from this table
SM-G530T/T1/W - gprimelte
SM-G530P - gprimeltespr
SM-S920L - gprimeltetfnvzw
SM-G530MU - gprimeltezt
SM-G530FZ - gprimeltexx
SM-G530M - fortunalteub
SM-G530H (XX) - fortuna3g
SM-G530H (XC) - fortunave3g
2. Head over to this site and download the right .tar file for your device
3. Shut down your device
4. Press VOLUME DOWN+HOME+POWER button
5. Press VOLUME UP
6. Open Odin (Connect your device)
7. Select TWRP .tar file for your device
8. Make sure to uncheck Force Reboot option (to unlock boot loader of your device)
9. Hit Start
10. After completing hit VOLUME UP+HOME+POWER button from the download mode
11. You Have successfully installed TWRP
Next Step
DOWNLOAD A ROM1. Head over to the grand prime development Forum at XDA
2. Select any Thread
3. Download the ROM for your device
4. Download GApps (ARM + ANDROID VERSION OF THE ROM + PICO, MICRO, STOCK)
5. Move them to Internal storage or SD card.
6. Shut down your device.
7. Press VOLUME UP+HOME+POWER
8. In TWRP, select Backup if you want
9. Select Wipe
10. Click on Advanced Wipe
11. Select Delvic/ART Cache , System, Cache, and Data
12. Swipe to wipe
13. Head over to Install
14. Locate the ROM and GApps
15. Select ROM.zip and then click on Add more Zips
16. Select GApps
17. Swipe to install.
18. Wait for it to finish
19. Click reboot device
20. Wait for it to reboot.
21. Setup the ROM.
22. Enjoy
IF YOU BRICKED YOUR DEVICE
Easy fix here
Just flash the Stock ROM via Odin
That's it
HOPE YOU GUYS LIKED IT AND IF I HELPED YOU PRESS THAT :good: THANKS BUTTON
Rom g530mu
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
I'm sorry my friend
:crying:
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
try a rom for fortunalteub...if you soft brick your device you can easily go back reflashing a stock rom
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
TWRP
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
Thanks! Worked ! even with existing OREO rom, did not flash rom, started with 2nd step
Sammobile is down
I can't download the stock oreo software. Are there any alternatives since im trying to reset my rooted phone back to stock..
Jens956 said:
I can't download the stock oreo software. Are there any alternatives since im trying to reset my rooted phone back to stock..
Click to expand...
Click to collapse
Use magisk uninstaller package?
palmbeach05 said:
Use magisk uninstaller package?
Click to expand...
Click to collapse
Man that wont work. I installed EDOS oreo ROM. I need to get it BACK TO STOCK, without any system modifications so i can sell my old phone to someone who wants it.
Jens956 said:
Man that wont work. I installed EDOS oreo ROM. I need to get it BACK TO STOCK, without any system modifications so i can sell my old phone to someone who wants it.
Click to expand...
Click to collapse
Ok well thats a bit more detail on your phone setup, i figured you had stock and were trying to unroot.
What is sammobile saying when you go to their site?
palmbeach05 said:
Ok well thats a bit more detail on your phone setup, i figured you had stock and were trying to unroot.
What is sammobile saying when you go to their site?
Click to expand...
Click to collapse
That the free downloads are unavailable because of maintenance
Jens956 said:
That the free downloads are unavailable because of maintenance
Click to expand...
Click to collapse
Try
http://updato.com/firmware-archive-select-model/
palmbeach05 said:
Try
http://updato.com/firmware-archive-select-model/
Click to expand...
Click to collapse
Yeah im currently downloading from there i think. It takes so many hours to download a 2gb zip :/
I can intall stock oreo and twrp but when reboot logo samsung is blocked
I have problem ... So when I put twrp file into odin AP section it gives me PASS message, but problem is after doing that it deletes all files in my phones internal storage my PC shows that 10gb out of 10gb internal storage in my phone is free. twrp works fine but if I try to boot system it gives me bootloop cuz there is no OS in my phone... any Ideas how to fix or what am I doing wrong? :/
BioBonus said:
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
TWRP
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
Click to expand...
Click to collapse
You've helped me get an old J5 2017 rooted. Cheers!! Merry Christmas!!
TWRP 3.5.0 One UI 3.1 for Samsung Galaxy A50 Android 11. How to Root Samsung Galaxy A50 Android 11 with TWRP 3.5.0 + Magisk. The TWRP Recovery support Galaxy A50 One UI 3.1 Android 11 firmware. It may be works for SM-A505F, SM-A505FN, SM-A505G, SM-A505GN. The TWRP 3.5.0 comes with Magisk Patched. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
LET ME KNOW IF IT WORKS FOR:
SM-A505FN, SM-A505G, SM-A505GN
Manual Instructions for Flashing and Rooting
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP as AP in ODIN, then click start.
DO NOT SKIP THIS STEP! Don't remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Appears.
Format data
Install multidisabler-samsung-2.6.zip
Reboot to Recovery
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Connect Phone to Internet
Install Magisk-v22.0.apk and Open it. Magisk will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
Video Instructions - Details
Download
TWRP 3.5.0 A11
Magisk22 app
Thanks to:
@neel0210 for Kernel Source
@Enzoaquino for OrangeFox
Good work
Thanks for twrp
Thank you
Flashing this @ A505GN. Hope it works
The twrp works but the multi disabler didn't work
This is a505gn
I reverted back to 3.4 because I encountered an issue. I'm stuck in bootloop, cannot access twrp nor download mode. Had to remove the back of my phone and unplug the ribbon connecting the battery to the phone just to power it off.
I already flashed the twrp via Odin but when I installed Magick on the phone this came up. Did I done something wrong?
q1pa said:
I already flashed the twrp via Odin but when I installed Magick on the phone this came up. Did I done something wrong?
Click to expand...
Click to collapse
it happens to me sometimes
just rebbot to revocery in twrp
Thank you @redymedan for the recovery. I'm glad to say that
your "how to android" channel is great.
I have a question Please clarify the following.
In this recovery Can we update magisk to latest? (When it released)
Sharath Mane said:
Thank you @redymedan for the recovery. I'm glad to say that
your "how to android" channel is great.
I have a question Please clarify the following.
In this recovery Can we update magisk to latest? (When it released)
Click to expand...
Click to collapse
Yes, you can update it from magisk apps
It worked!
I had to run a patched AP first for magisk to work
Im on a A505G/DS
It worked just fine on my A505FN! Thanks!
Worked perfectly on A505W !
Had to use Multidisabler 3.1 instead.
I have an A505FN and I'm not able to root it with Magisk. If I try to install the linked TWRP_v3.5.0_A505_A11_Magisk.tar with Odin, then I can't reboot into Recovery afterwards - instead the Download-Mode appears again.
With RR-TWRP_v3.4.0_A505_CUBC_OneUI.tar from another Thread, it's possible to start into TWRP after flashing it with Odin. But if I boot into System (LOS 18.1) and start the already preinstalled Magisk, Magisk updates itself and after restart of Magisk I can try to install Magisk and in the first screen "Recovery Mode" is checked. If I click on "Next step", the Option "Recovery Mode" disappears and I can choose a file to patch.
I don't know where I'm wrong.
IngolfN said:
I have an A505FN and I'm not able to root it with Magisk. If I try to install the linked TWRP_v3.5.0_A505_A11_Magisk.tar with Odin, then I can't reboot into Recovery afterwards - instead the Download-Mode appears again.
With RR-TWRP_v3.4.0_A505_CUBC_OneUI.tar from another Thread, it's possible to start into TWRP after flashing it with Odin. But if I boot into System (LOS 18.1) and start the already preinstalled Magisk, Magisk updates itself and after restart of Magisk I can try to install Magisk and in the first screen "Recovery Mode" is checked. If I click on "Next step", the Option "Recovery Mode" disappears and I can choose a file to patch.
I don't know where I'm wrong.
Click to expand...
Click to collapse
Flash stock rom with odin
Reboot. Do not login to google. Check oem grayed out.
Reboot to download mode
Select 3.5.0 twrp as ap. (You should Untick autorestart in options) . Start.
By connecting cable reboot into recovery by using button combo. Do not reboot to system. Do not remove cable.
After entering twrp.
Format data. Next flash multidisabler.
Now select reboot to recovery.
Wait for few minutes, if doesn't boot,force restart by using volume down and power buttons. It will bootup.
You can finish ur setup now.
You can flash other roms . To enter twrp you need to connect cable with pc and use buttons.
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
IngolfN said:
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
Click to expand...
Click to collapse
you will edit your ini.environ.rc
watch it in youtube
IngolfN said:
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
Click to expand...
Click to collapse
Goto twrp and select reboot recovery
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
[Update#1]
Today I have managed to install the Android Beta 3.1 [ is beta software and I don't recommend using it as your daily os]
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel4a_SBeta3.1%20-%20TBO42ZZ8IF/Pixel4a_SBeta3.1-AB-12-20210727-nippongsi.img.gz/download
you can download the ROM file from Nippon's Sourceforge
every step is the same and you just have to change the rom as this
there's a bug that developer setting crash the settings app and it is working but it does have some lots of bugs, and screen lock is not working but I'll try to fix it and upload the method
if your device get boot looped, press Bixby + power + vol down to boot into download mode and flash the stock AP file using Odin
[I was supposed to edit the upper one but accidentally created as a reply ]
Just go to UPDATE#2
Skuld Norniern said:
Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)
Click to expand...
Click to collapse
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
thongass000 said:
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
Click to expand...
Click to collapse
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Skuld Norniern said:
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Click to expand...
Click to collapse
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
thongass000 said:
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
Click to expand...
Click to collapse
Sorry for being late!!
for me, I do have the same issue with wired audio and I have not been able to find a way to fix it yet
if I manage to fix the issue I will fix the main article
Skuld Norniern said:
Skuld Norniern said:
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
Click to expand...
Click to collapse
Hello sir i can't find havoc os 4.5 in:https://download.havoc-os.com/?dir=arm64-ab
Click to expand...
Click to collapse
After flashing twrp on my sm g885f, cant get into terp,
mine shows volume down + power to restart, not to enter turn off
how can i enter into twrp
Skuld Norniern said:
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
Click to expand...
Click to collapse
'os.img file' where
, guess i fixed it
when installing Certification_Patch.zip, it shows command error
what i found- this patch is for G885FDXS5CUL1, mine is
G885FDXU5CUG1