[KERNEL][R/S/T][One UI/AOSP] Mint Kernel – Freshen up your Galaxy - Samsung Galaxy A50 ROMs, Kernels, Recoveries, & Ot

[KERNEL][R/S/T][One UI/AOSP] Mint Kernel – Freshen up your Galaxy - Samsung Galaxy A50 ROMs, Kernels, Recoveries, & Ot

Q: What bootloader does this need?A: It is strongly advised to install the One UI 3.1 update before installing Mint, for the most stable experience. Installing on Android 10 will cause issues, and is not supported.Q: I'm locked out (bootloop) after installation. What do I do?A: If you ever experience being locked out after installing any build, with SystemUI restarting after entering your password/PIN, and Samsung Account showing a Samsung Account logged out notification, you may have been experiencing the "Pin Problem".
Several builds of TWRP and OrangeFox have a security patch level (SPL) of 2099-12 (December 2099), but Mint follows the latest SPL available to the device. This causes the device to act up once booted into the kernel.Please note that it is intended behavior by the system and is not a bug.You can flash PassReset, or wipe your device to fix it.See here for more information.Q: I'm signed out from my Samsung Account and cannot log back. What do I do?A: Clear Samsung Account data. You can do either of the following:
With a PC and ADB installed, run this command:
Code:
adb shell pm clear com.osp.app.signin
On a terminal app with root access, do:
Code:
su -c pm clear com.osp.app.signin
Q: I'm experiencing other issues.A: Please report through this feedback form, or the Fresh Community on Discord. Please include logs, screenshots, or screen recordings so I can help you better.
Mint will never be possible without the unwavering work of these awesome people. I have tried my best to keep their authorships on Mint's commit history. Thank you very much!
Cruel Kernel for the Galaxy S10/Note10 (evdenis)
ThunderStorms Kernel for the Galaxy S10/Note10 (ThunderStorms21th)
Cosmic Fresh (Dark-Matter7232) and Optimized M21 Kernel (repinger) for the Galaxy M21.
Destrictize Project (DestrictizeProject)
Motorola One Action/Vision Kernel Sources
Quantum Kernel (prashantpaddune)
Zeus Kernel for the Galaxy Note9 (THEBOSS619)
Custom Galaxy A51 Kernel (ianmacd)
StormBreaker Kernel (stormbreaker-project) and Stratosphere Kernel (Stratosphere-Kernel) for the POCO X3
Artemis Kernel for the Pixel 4 XL (celtare21)
GS101/Tensor SoC Kernel Source (Google/AndreiLux)

Reserved 2

You're great.

Is cts profile pass on this kernel ?
I'm using snake os + kakarot kernel and unable to pass cts profile, hence I'm unable to use any banking apps

aaki_rocker said:
Is cts profile pass on this kernel ?
I'm using snake os + kakarot kernel and unable to pass cts profile, hence I'm unable to use any banking apps
Click to expand...
Click to collapse
Passing SafetyNet is handled by your ROM, not the kernel. :>

Oo okay. Thanks
TenSeventy7 said:
Passing SafetyNet is handled by your ROM, not the kernel. :>
Click to expand...
Click to collapse

Is this good for gaming and is this better than prishkernel

One of the best kernel

is the selinux switchable ?

JULiO.7 said:
is the selinux switchable ?
Click to expand...
Click to collapse
Yes. :>

Hiya
I have your fresh rom installed
And I've been using it for quite a while (Amazing rom btw)
Can i flash the kernel with this rom installed?

Will this work on my A505w with stock oneui 3.1?

so im on stock with root already - when i flash this (root) will it over write my magisk and modules or when i flash nonroot will it clear all my magisk stuff? ...

Quick Update:
I'm currently pulling out the Mint 11.5 release as I have observed instabilities when using specific applications. I thought those were fixed from testing but it seems the issue stems deeper than just a single commit revert.
HUGE apologies. The performance is great if I say so myself, but there are some major issues needed to be fixed.
Thank you for your understanding.

Hello, sorry if its a stupid question, but there is something wrong with a50 ever since it was been updated to android 10/android 11, at least on my a505gt, whenever i get into a discord call, the audio starts to cut alot and it goes to mono sound, would a kernel fix it?

Currently I'm using your kernel with SnakeOS v4.0 and it running smooth like good peanut butter, good work.
@TenSeventy7
The question is, can I use it with any AOSP Android 12 ROM?

TheHEARER said:
Currently I'm using your kernel with SnakeOS v4.0 and it running smooth like good peanut butter, good work.
@TenSeventy7
The question is, can I use it with any AOSP Android 12 ROM?
Click to expand...
Click to collapse
I tested this kernel with ProjectRadiant, Corvus, and PixelPlusUI. a bit laggy but I don't think it's relevant with this kernel.

aybrk27 said:
I tested this kernel with ProjectRadiant, Corvus, and PixelPlusUI. a bit laggy but I don't think it's relevant with this kernel.
Click to expand...
Click to collapse
TheHEARER said:
Currently I'm using your kernel with SnakeOS v4.0 and it running smooth like good peanut butter, good work.
@TenSeventy7
The question is, can I use it with any AOSP Android 12 ROM?
Click to expand...
Click to collapse
There's a separate builds for android 12 ROMS

JuanTamqd21 said:
There's a separate builds for android 12 ROMS
Click to expand...
Click to collapse
I am using this with SnakeOS mainly.
I just tested it with the others.

Related

Twisted-Kernel 7.0 (F-I) Flat/Edge [OC/UC] Linaro 7.1[Safety-Net] 8/21/2017

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the Twisted Kernel for the Galaxy S6 920F, and 925F.......These kernels
are based on G920TUVU5FQE1 with all the correct ramdisk merges. Both kernels also come
with Synaspe support.....which will be discussed more below.
I also want everyone to know that I have a 920T, not a F model,etc.....So I have built
these for YOU, not me. All I ask is a little bit of appreciation for the time I had to spend
on bringing this to yall. I dont think I'm asking for too much. Plus, I dont see very many
kernels here, especially with the amount of optimizations as mine do. Or rather, the experience
in building them.
SYNAPSE
Each kernel has Synapse support. Now, before anyone starts *****ing......there is some Java errors
that I still need to fix. They WILL NOT affect performance OR battery life. I just havent gotten around
to fixing them yet. But, I will be addressing them on the next update.
If you are unfamiliar with Synapse I would suggest that you do some reading on it. It can become
the best thing since sweet tea, or the worst like.......well, you get the picture. BUT, Synaspe does
have a safety feature......if you adjust something (like voltage) and either give or take away too much,
Synaspe will cancel out your selections on a reboot.
KERNEL FEATURES
A57 Cluster OC to 2304 MHz
A57 Cluster UC to 200 MHz
A53 Cluster OC to 1704 MHz
A53 Cluster UC to 200 MHz
Live CPU Stats
20 CPU Govs
Interactive Tuning
Touchkey Boost
GPU OC
GPU Live Stats
HMP Voltage Control
Memory Bus Voltage Control
11 I/O Schedulers
I/O Tunable
LMK Profiles
Ultra Kernel SamePage Merging UKSM
UKSM Live Stats
Dynamic Dirty Page Writeback
Virtual Memory
Zswap Memory Pool
Kernel Entropy
Gentle Fair Sleeper Control
Arch Power Control
Randomisation
Freeze Timeout
Google Play Services Battery Drain Fix
Minimal Wake Lock Control (still working on this)
Power Suspend Control
EQ Sound Controls
Thermal Controls ( still working on this )
LED Notification Controls
13 TCP Algorithm
Optimize DataBase Controls
FSTrim Control
Wipe Options
Wipe Junk Folders
Build.prop Control
Logcat Controls
And Info
My kernels provide the best of both worlds, performance and battery life. If you want your
device to be wide open and battery life isnt a issue, you can tune it to fly just as fast as you
want. Or, if your the conservative type, you can tune it in to get you the best battery life you
can possibly have on the S6. The choice is all yours on how YOU want your device to run. All
I did was give you the means to do so........
MAGISK
My kernel comes with all the commits in order for it to pass all Safety-Net restictions. But,
Magisk can also cause issues such as loosing root on a reboot, or causing errors in Synaspe.
This is due to BusyBox which he has implemented in his binary. This is NOT a kernel issue.
So please dont flood my thread with things I cannot control.
SUPERSU
SuperSU works just fine. Only set-back is that it will not pass Safety-Net. BUT, he does have
a Aroma installer that just may help to pass all of Safety-Net bull........I myself uses SuperSU
Just make sure that you flash either Magisk or SuperSU after you flash the kernel. Failure
to do so will make it boot back to TWRP......
ISSUES/BUGS/REBOOTS
If you have any of these problems you need to speak up. I have been on this kernel for awhile
and have yet to run into any issues. Thats not saying that you won't either.....
REMEMBER, I BUILT THESE KERNELS FOR you.........
DOWNLOADS
920F
925F
XDA:DevDB Information
Twisted-Nougat-Kernel, Kernel for the Samsung Galaxy S6
Contributors
The Sickness
Source Code: https://www.androidfilehost.com/?fid=817550096634793936
Kernel Special Features: Nougat 7.0
Version Information
Status: Stable
Stable Release Date: 2017-08-21
Beta Release Date: 2017-08-21
Created 2017-08-22
Last Updated 2017-08-21

Mine

Mine #2

Will try that, Thx bro!

Sir @The Sickness may i ask if 925F version maybe flash on edge korean version or is any one here have manage to flash it on edge korean version..?

Where is this supersu aroma? I had never heard about an aroma installer for supersu, i'm interested in it

Warrenforfree said:
Sir @The Sickness may i ask if 925F version maybe flash on edge korean version or is any one here have manage to flash it on edge korean version..?
Click to expand...
Click to collapse
You can try. Just make sure have a backup first
erghetto said:
Where is this supersu aroma? I had never heard about an aroma installer for supersu, i'm interested in it
Click to expand...
Click to collapse
Search for Chainfire in XDA...there is a thread on it

The Sickness said:
You can try. Just make sure have a backup first
Search for Chainfire in XDA...there is a thread on it
Click to expand...
Click to collapse
Not that?
https://forum.xda-developers.com/apps/supersu/supersu-aroma-installer-t3414877

rifek4 said:
Not that?
https://forum.xda-developers.com/apps/supersu/supersu-aroma-installer-t3414877
Click to expand...
Click to collapse
Yes, that thread.
I do have Magisk 13.3 working just fine on my end

The Sickness said:
Yes, that thread.
I do have Magisk 13.3 working just fine on my end
Click to expand...
Click to collapse
Me too like it but do I can ask you why 13.3 not newest 13.6? And which kernel you using, Twisted? I asking, because you told in info that Twisted isn't compatible with Magisk. I tried use Magisk 13.6 on NNE5.1 ROM with Twisted Kernel and didn't works

rifek4 said:
Me too like it but do I can ask you why 13.3 not newest 13.6? And which kernel you using, Twisted? I asking, because you told in info that Twisted isn't compatible with Magisk. I tried use Magisk 13.6 on NNE5.1 ROM with Twisted Kernel and didn't works
Click to expand...
Click to collapse
Didn't know about 13.6.
I use my own kernel which is Twisted 920T

The Sickness said:
Didn't know about 13.6.
I use my own kernel which is Twisted 920T
Click to expand...
Click to collapse
That's for the T-Mobile S6 version? And how u turn it on to working with Magisk? I flashed NNE5.1 and just after that Twisted Kernel then Magisk > Reboot > got "no root" in Magisk window

rifek4 said:
That's for the T-Mobile S6 version? And how u turn it on to working with Magisk? I flashed NNE5.1 and just after that Twisted Kernel then Magisk > Reboot > got "no root" in Magisk window
Click to expand...
Click to collapse
I just looked and now no root...
Back to SuperSU for me

The Sickness said:
Back to SuperSU for me
Click to expand...
Click to collapse
Yes I did it heh... But BTW for now I going to latest N0G33K Kernel

Hmm thanx bro im try it

Any chance to get 925W8 compatibility?

I got G925F and Twisted Kernel is not working for me on NNE5.1.... Its start to boot then reboot and back to recovery.

You must everytime reflash root (magisk/supersu.zip) directly after flashing new kernel.

Awesome work! @The Sickness One question though, is this the same kernel as the one you pulled off in the Original development section?

tiktakt0w said:
Awesome work! @The Sickness One question though, is this the same kernel as the one you pulled off in the Original development section?
Click to expand...
Click to collapse
Yes, but now he's changing few important things and we are waiting for updated version

[KERNEL] [blu_spark r184 unified OP5/5T] [OOS 9.* / pie custom ROMs]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Powered by Ubuntu 18.04.3 x86_64 (sparky VPS @ www.servercore.com.br - thanks @ChristianLetti)
Build with custom toolchain blu_gcc-9.2.0 (cortex-a73.cortex-a53 targeted, build with latest Crosstool-NG from GCC-9.2.0 snapshot)
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish OP5 builds based on OnePlusOSS/android_kernel_oneplus_msm8998
Systemless installer (doesn't touch system partition, OTA friendly - Nougat only), AnyKernel3 backend (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
No OC, use 300HZ kernel timer frequency
msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS, CIFS & NFS)
Removed verify and doesn't force encryption, patched SafetyNet flags to pass CTS
Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
Disabled hotplug, also on low battery levels (CTL and BCL)
Optimized crypto routines
Swap and adaptive LMK off by default, 60 apps on background by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and reworked GPU driver (goes to idle @ 180MHz)
adrenoboost enabled by default at medium level
KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
KLAPSE support (v5.0)
DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
Compatible with Kernel Adiutor, EXKM, FKM and others
DOWNLOAD KERNEL ZIPExtras download location(No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
OnePlus 5T development unit donated by OnePlus. Big shouts to them
Very proud of being on the OnePlus Developer Program, special thanks to Adam K. for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for OP5/5T unified, Kernel for the OnePlus 5T
Contributors
eng.stk
Source Code: https://github.com/engstk/op5
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r184 unified pie
Stable Release Date: 2019-10-19
Current Beta Version: r180 unified pie
Beta Release Date: 2019-08-24
Created 2017-11-17
Last Updated 2019-10-18

blu_spark r51 unified
All right crew!
First kernel for the 5T is up, fastlane style :highfive:
This is an initial build, tested only on OP5. It is a baseline for 5/5t unified installer (similar of 3/3T).
For now, seems like fw updates from OOS 4.7 are needed for some stuff, so it is only working 95% on the OP5 OOS 4.5.* (FPR doesn't work).
Don't flash this on OP5 for now. On 5T all should be working just fine.
So, keep in mind that it's tested on the OP5, on the 5T it's not because I don't have the device just yet.
Backup and take all the precautions you can think of, if you're cat get's on fire you're on your own
blu_spark_r51-oos_op5-op5t_79c5b56.zip
build: use newest and improved blu_naro-7.2, build from developer snapshot Linaro GCC 7.2-2017.10, with updated components and improvements/fixes
Synchronize codes for OxygenOS 4.7.1
full rebase and features bringup from OP5
drivers: misc: fix a couple build errors
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
Meaning, if using anything besides stock and stable OOS don't bother posting about it.
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free

bronderb said:
Wow, that was quick!
Click to expand...
Click to collapse
had it running since yesterday :silly:

Phone isn't even released to public yet.
eng.stk is a legend.
From my OP3T

(No mirrors allowed)
Click to expand...
Click to collapse
Are you aware that you violate the terms of the GPL with this?

Rosa Elefant said:
Are you aware that you violate the terms of the GPL with this?
Click to expand...
Click to collapse
For security purposes the place for downloads is this xda repo for the compiled stuff.
Source code is available for anyone to use and build for themselves.
Don't see any issue with that, this is only a cortesy.

The issue is that the GPL enforces you to allow anyone to distribute any derivative works - including "the compiled stuff" - in any way they want. That also means mirrors. So no, "no mirrors allowed" violates the GPL. You might want to replace that by "please don't mirror" or something.
(I know this is nitpicking in a way. I was just wondering.)

Rosa Elefant said:
The issue is that the GPL enforces you to allow anyone to distribute any derivative works - including "the compiled stuff" - in any way they want. That also means mirrors. So no, "no mirrors allowed" violates the GPL. You might want to replace that by "please don't mirror" or something.
(I know this is nitpicking in a way. I was just wondering.)
Click to expand...
Click to collapse
I'm not enforcing anything, this is valid for xda links posted, as a cortesy and for security. Word play it's what it is, I can change if it suits you better.
Other than that you can burn CDs with it and send to your friends if you like

WHAT!
You're a Living Legend @eng.stk

Rosa Elefant said:
Are you aware that you violate the terms of the GPL with this?
Click to expand...
Click to collapse
Rules are made to be broken. Not every rule needs to be enforced when it wont matter and harms nobody. Like he said its a courtesy thing stop doing the moderation for XDA they do a good job themselves. Keep OT out as much as possible. Some people would rather see this thread get support instead of strikes from "rules"

You know, you could just send me a PM instead of further distracting this topic. But FWIW, a legally binding licensing term is not a "rule".

eng.stk said:
Advanced filesystem: If you want to use f2fs, do the following (backup your data to external source before attempt this, it will erase all your sdcard data)
Go to Wipe -> Advanced Wipe -> Select only Data -> Repair/Format File system -> Change partition type to f2fs
Go to Wipe -> Advanced Wipe -> Select only Cache -> Repair/Format File system -> Change partition type to f2fs
Reboot and profit
To be back on ext4, just do the same but choose ext4 instead
Click to expand...
Click to collapse
Does recommended or not if i also partition /system as f2fs?

exodius48 said:
Does recommended or not if i also partition /system as f2fs?
Click to expand...
Click to collapse
No, you can only use it on data.
I prefer ext4 nowadays.
Sent from my blu_spark'd OP5

eng.stk said:
No, you can only use it on data.
I prefer ext4 nowadays.
Click to expand...
Click to collapse
Why's that..? You are the reason I was using F2FS due to your regular updates on kernel / recovery. Faced bad exp on it?

arvindgr said:
Why's that..? You are the reason I was using F2FS due to your regular updates on kernel / recovery. Faced bad exp on it?
Click to expand...
Click to collapse
Some instability on latest times and on fast UFS devices there's no much performance difference.
Also I don't upstream f2fs on 4.4 because of FBE and crypto stuff, prefer to leave as it is and just add security patches when applicable.

Most likely because nowadays Memory is so fast (especially with UFS2.1) that it doesn't really matters and isn't worth the trouble.
I tested it back on my days with the OPO and Nexus 6 and never saw any real benefit for most parts and they haven't have had UFS2.1.
So don't expect too much of a performance gain with F2FS.
EXT is a mature system, more mature than F2FS. And sometime safety counts more than fractions of seconds of starting speed for a bigger application.

Are there wake-up gesture options in the Kernel?

xocomaox said:
Are there wake-up gesture options in the Kernel?
Click to expand...
Click to collapse
Gestures are the same as stock.

Thanks for coming man I just order my 5t

dabug123 said:
Thanks for coming man I just order my 5t
Click to expand...
Click to collapse
Liquid remix for 5t? Haha just joking nice that you're getting one too

[KERNEL] [blu_spark r16 View 10] [8.1 EMUI / custom ROMs]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom toolchain Linaro GCC 4.9.4 2017.01
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish builds from BKL-L04 EMUI8.1.0.107 source drop
Systemless installer (doesn't touch system/vendor partition, OTA friendly)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and miscellaneous fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
cpu-boost CAF driver ported for kirin with some added improvements (Dynamic Stune Boost included)
No OC, use 300HZ base timer frequency
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS, CIFS & NFS) (WIP)
Removed verify and doesn't force encryption, patched SafetyNet flags to pass CTS (WIP)
Stock thermal driver by default
Optimized crypto routines (WIP)
Swap and ZRAM off by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel an FPR) (WIP)
Graphic stack fixes and reworked GPU driver
USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control (WIP)
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP (No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock EMUI with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including EMUI based ones) you're on your own. I'm only interested on debugging stuff in stock and stable EMUI.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem (systemless).
You can backup your ramdisk.img and kernel.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
Honor View 10 development unit donated by Honor USA. Big shouts to them
Special thanks to @[email protected]_USA for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for Honor View 10, Kernel for the Honor View 10
Contributors
eng.stk
Source Code: https://github.com/engstk/view10
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r16
Stable Release Date: 2018-05-31
Current Beta Version: r8
Beta Release Date: 2018-04-30
Created 2018-04-29
Last Updated 2019-11-29

blu_spark r8
All right crew!
blu_spark has made to Honor View 10!
First build is up :highfive:
Lot's of stuff merged in, we now have a nice and stable baseline to work with.
More of the usual missing goodies to come in future builds :fingers-crossed:
It was tested in L04 model with latest EMUI 8.1.0.105 so any other FW your results may vary.
To install you must use TWRP, @Pretoriano80 Unofficial TWRP is recommended.
You must have stock (or rooted) ramdisk and kernel before install.
blu_spark_r8-view10_66f0c4b.zip
build: use Linaro GCC 4.9.4-2017.01 for now
First kernel build with too much stuff to talk about, check git
ramdisk and installer changes to match View 10 stuff
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including EMUI based ones).
Meaning, if using anything besides stock and stable EMUI don't bother posting about it.
I am only interested on debugging stuff in stock and stable EMUI (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free

nice glad to see linaro gcc was usable and was just something odd in my end... lol
for some odd reason on ubertc was usable as gcc fir me...

Nice job....
Does this support changing charging rate in KA?
Can i install this on BKL-L09 model?

kevp75 said:
nice glad to see linaro gcc was usable and was just something odd in my end... lol
for some odd reason on ubertc was usable as gcc fir me...
Click to expand...
Click to collapse
Yeah well try to check if you have any cruft or leftovers derping, I encountered similar situation when building.
venreddy said:
Nice job....
Does this support changing charging rate in KA?
Can i install this on BKL-L09 model?
Click to expand...
Click to collapse
No charge changes at the moment.
If fw is 8.1 should work, otherwise I don't know. Backup, try and let us know.
Sent from my blu_spark'd Honor View 10

eng.stk said:
Yeah well try to check if you have any cruft or leftovers derping, I encountered similar situation when building.
Click to expand...
Click to collapse
yeah, thought that too... did the same on fresh source download too tho
Got it to compile using Uber TC tho, so maybe I'll run with it and see what I can break LOL :laugh:

Woot

eng.stk said:
No charge changes at the moment.
If fw is 8.1 should work, otherwise I don't know. Backup, try and let us know.
Sent from my blu_spark'd Honor View 10
Click to expand...
Click to collapse
BKL-L09 is still with 8.0 emui.
I doubt this will work, but will try this later. It would not brick my phone right? Just need to back up stock kernel and fish it, if phone doesn't boot then flash backedup kernel. Right?

venreddy said:
BKL-L09 is still with 8.0 emui.
I doubt this will work, but will try this later. It would not brick my phone right? Just need to back up stock kernel and fish it, if phone doesn't boot then flash backedup kernel. Right?
Click to expand...
Click to collapse
backup both kernel and ramdisk

Rommco05 said:
Not bootnig on L09 LOS, stock kernel L04 don't boot too
Click to expand...
Click to collapse
fastboot flash your stock kernel.img and ramdisk.img

Rommco05 said:
Not bootnig on L09 LOS, stock kernel L04 don't boot too
edit: just telling
Click to expand...
Click to collapse
Thanks for testing. Hope Honor updates all the phones from all regions to Android 8.1 besides L04 devices :fingers-crossed:
Fragmentation is never good...

can i flash on BLA-L29 with emui 8 oreo 8.0?

fatalynx said:
can i flash on BLA-L29 with emui 8 oreo 8.0?
Click to expand...
Click to collapse
backup your ramdisk.img and kernel.img and tell us
(note, if you read the thread a little [like the couple posts above you], you'd see that it really only works on the US version, but, do what you want....)

Try to enable bonding mode inside defconfig, most of the new wifi driver support this option

scafroglia93 said:
Try to enable bonding mode inside defconfig, most of the new wifi driver support this option
Click to expand...
Click to collapse
I can checknit out, but some OEM don't enable that on 2.4G because it can introducr wifi issues with some APs.
Sent from my blu_spark'd Honor View 10

kevp75 said:
backup your ramdisk.img and kernel.img and tell us
(note, if you read the thread a little [like the couple posts above you], you'd see that it really only works on the US version, but, do what you want....)
Click to expand...
Click to collapse
will give it a shoot tq btw..

kevp75 said:
yeah, thought that too... did the same on fresh source download too tho
Got it to compile using Uber TC tho, so maybe I'll run with it and see what I can break LOL :laugh:
Click to expand...
Click to collapse
cross-compile is hardcoded in tzdriver/Makefile and will only use aarch64-linux-android-
https://github.com/UchihaDev/HyperPlus/commit/f04adc459eb60bcc1e22158ef6ae834e24929232

ajituchiha said:
cross-compile is hardcoded in tzdriver/Makefile and will only use aarch64-linux-android-
https://github.com/UchihaDev/HyperPlus/commit/f04adc459eb60bcc1e22158ef6ae834e24929232
Click to expand...
Click to collapse
Appreciate it mate.
Thanks for helping the noob compiler lol

fatalynx said:
will give it a shoot tq btw..
Click to expand...
Click to collapse
And already failed??
Sent from my HUAWEI BLA-L29 using XDA Labs

Tried on bkl-al20, cannot enter tne system.

[KERNEL][OP7/7PRO][18 SEP][ SkyDragon [OOS10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back again!
You may remember me from my SkyDragon roms/kernels and HolyDragon kernels for OP6/OP6T/OP3/N6/M8/M7/G3 among other devices. This is the latest sm8150 kernel+audio source from OnePlus. For now just some latency reductions and a couple listed features while I work on optimizing it. No plans for any overclocking cpu/gpu that slowly kill your phone. No plans to upstream anything as most of the time there's either no benefit at all or it performs worse than stock. I don't care about f2fs and recommend only ext4 as the stock filesystem. My only goal, as always, is to get the best performance *and* battery life out of our phone as possible. Kernel zip uses Anykernel3 by Osm0sis to install so no fear of losing root or ramdisk changes or anything.
~*~*Information*~*~
Flashable Kernel zip supports all OnePlus 7 and OnePlus 7 Pro(non-5G) devices running OOS Stable 10.x
Kernel source is based on official OnePlus 7/7Pro unified source code to ensure best performance
No user setup required - Optimal settings already applied
Compiled with Google Clang 9.0.5(r353983e) and gandalf02's aarch64-9.1 GCC
~*~*Features*~*~
250HZ Kernel
ExFat Support
No user clock-speed modifications
BBR TCP Congestion Profile (set as default
CRC Check Toggle-able (disabled by default)
Power Efficient Workqueue's Toggle (enabled)
Maple IO Scheduler (set as default)
Flar2's Wake Gesture support
KCAL
Boeffla Wakelock Blocker
Latest WireGuard Built-In
~*~*Credits and Thanks*~*~
xanaxdroid
SultanXDA/KernelToast
RandomBlame/Kelsirae
Pafcholini
MLucy
Flar2
MyFluxi
DespairFactor
FranciscoFranco
KDrag0n
Osm0sis
Mauronofrio
Joshuos
dabug123
~*~*Downloads*~*~
To Install :
Make sure bootloader is unlocked
Make sure you're on latest TWRP
Download this kernel zip
Reboot device to TWRP
Find this zip and install
Reboot to system and enjoy!
---
Could also copy zip or image to usb otg drive and flash in twrp
Do not flash with EXKM app
For Oneplus 7/7 Pro(Non 5G) and Oneplus 7T/7T Pro(Non 5G)
SDK_OP7TP_OOS10_RV.10.1
Flashable Zip
AFH
GDrive
--
Telegram Group
TG
Discord Server
Discord
~~~~~~~~~~~~~~~~~~~~~~~~
You can find changes(changelog) by looking at my posted source. You can also find my custom toolchain's, crosstool-ng, and other sources listed there. Any bug reports require logcats/dmesg, thanks!
~*~*Donations*~*~
If you want to donate to my coffee fund, I prefer any cryptocurrency over paypal but either is fine.
Donate with Coinpayments
or just use paypal, thanks!
XDA:DevDB Information
[KERNEL][OP7/7PRO][18 SEP][ SkyDragon [OOS10], Kernel for the OnePlus 7 Pro
Contributors
HolyAngel, Liam_Davenport, Imotep95
Source Code: https://gitlab.com/holyangel/OP7.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Current
Stable Release Date: 2019-05-23
Beta Release Date: 2019-05-21
Created 2019-05-21
Last Updated 2020-09-18

SkyDragon OOS Magisk Mod
Reserved

Reserved
Frequently Asked Questions
Before issues should be reported:
1. Rom needs to be clean flashed
2. No Xposed, AKT Profiles, Helix Engine, other magisk modules, or other mods, etc.
3. Do not restore any apps with TiBu or Swift or some other app restoring application
4. No Substratum themes installed
If you can still reproduce the issue you're having:
1. Logcat/logs must be provided with your report in order to receive any support.
2. I also need a full description of what happened, what you were doing when it happened, and a way to guarantee-ably reproduce the problem. If I or my testers cannot reproduce it, not only will it likely not get fixed, it likely isn't even an issue with the rom/kernel.
3. Screen record or picture of the issue is also helpful.
If you're not familiar with how to get logs, you can reference this great XDA Thread here.
If you can't give logs for errors or possible bugs, I literally cannot help you solve it.

Can't wait to try this out! Thanks!!

This could be a really dumb question, but could the zip be flashed in TWRP from a USB DRIVE..?
Or within an app like EX Kernel Manager?

reaper000 said:
This could be a really dumb question, but could the zip be flashed in TWRP from a USB DRIVE..?
Or within an app like EX Kernel Manager?
Click to expand...
Click to collapse
Not dumb at all, you could totally do either of those to flash it :good:

Wireguard support?

JedixJarf said:
Wireguard support?
Click to expand...
Click to collapse
No and won't be until they can pass a security audit. Says right on their site not to rely on their code until they do.

HolyAngel said:
No and won't be until they can pass a security audit. Says right on their site not to rely on their code until they do.
Click to expand...
Click to collapse
No problem thanks ?

Bacc at it again! Great job!

Excellent! I'm assuming Skydragon ROM eventually =).

SoullessMexican said:
Excellent! I'm assuming Skydragon ROM eventually =).
Click to expand...
Click to collapse
Yes will come when it's ready

Wouldn't you think that the CRC toggle is obsolete on any Oneplus device you support.

HolyAngel said:
CRC Check Toggle-able (disabled by default)
Click to expand...
Click to collapse
Hey buddy,
I was having a look at CRC check and what it does.
https://gitlab.com/HolyAngel/op7/commit/818f89d20f197ddf81aa2c8a40551b96173f2c2e
I've noticed your commit is in the mmc driver but given that we have UFS3.0 (not emmc 5.1) and that we don't have a micro SD slot, isn't this a worthless change because we will never be using mmc based storage?
Regards,
Ravi
Sent from my OnePlus7Pro using XDA Labs

Telegram Group
Are there any telegram groups for this kernel/rom?

@HolyAngel
Welcome & thank you.

@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."

Hirs_E_Fruit said:
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Click to expand...
Click to collapse
If the same as on OP6, then you can dismiss it on each reboot. Last year it took a couple of weeks to figure out what caused it and it was subsequently addressed. It doesn't have any impact on the working of your phone.
Sent from my OnePlus7Pro using XDA Labs

rav101 said:
Hey buddy,
I was having a look at CRC check and what it does.
https://gitlab.com/HolyAngel/op7/commit/818f89d20f197ddf81aa2c8a40551b96173f2c2e
I've noticed your commit is in the mmc driver but given that we have UFS3.0 (not emmc 5.1) and that we don't have a micro SD slot, isn't this a worthless change because we will never be using mmc based storage?
Regards,
Ravi
Click to expand...
Click to collapse
Yeah most likely useless at the moment but the stock defconfig compiles the mmc driver anyways.

Hirs_E_Fruit said:
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Click to expand...
Click to collapse
Yes this is the message on boot listed in the op that will be fixed soon. Can safely ignore it.

[KERNEL][AOSP][AnyKernel][LOS-16.0+EAS] Gamma Kernel for [All Lineage Variants]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DESCRIPTION
Hey guys, I have started a custom Kernel based on LineageOS sources with 98% CAF. So I would like to share my own performance and usability improvements with minimal feature and enhancements on top. The intention is to have a minimal light-weight kernel that is very fine tuned for the device.
FEATURES
Minimal Kernel with a stripped defconfig base to be more streamlined and have less memory footprint
User space display color calibration (KCAL) with screen calibrated against iPhone 8 Plus, also helps reducing screen retention
Schedutil governor making use of EAS features with updates from Linux 4.4 and 4.12
Up to date with LineageOS sources for maximum compatibility and security bugfixes
Memory and cache subsystem optimizations, you will feel it
Adaptive LMK enabled by default
Transparent Hugepages are enabled
ZRAM/Swap partition is disabled by default
BFQ IO scheduler set by default to avoid slow-downs on task intensive scenarios
No overclocking was chosen to avoid unnecessary heat, optimizations were focused on other different areas
Kernel Samepage Sharing enabled with deferred timer by default to gain some memory usage optimizations, the process sleeps on regular basis and I've profiled it so that there's no battery drains due to it
Simple temperature controls for msm_thermals exposed
Compiled with GCC 6.x optimized toolchain and -O3 plus other hardware specific flags
Undervolted the Adreno 530 GPU voltage rail to keep things cooler
CAF Rebase on major portions of the Kernel has helped lower the memory footprint a lot
ES9218 Quad DAC automatic toggling working inside the kernel for headphone HIFI playback, please read here for details
DOWNLOADS
AnyKernel: Click Here (Or check top of the post, download tab)
(Recommended) Stock Tasha XML Audio Mixer FIles : Click Here
(Recommended) Stock Thermal Engine with Tweaked Values Flashable : Click Here
SOURCE
V20-Kernel-Gamma GitHub Source
NOTES
Here is a GeekbenchV4 result example : http://browser.geekbench.com/v4/cpu/10667886
KNOWN BUGS
Two second delay between plugging charger and detecting it.
I would also like to thanks to various people who contribute tremendously such as:
@x86cpu
@EvilHowl
@USA-RedDragon
@savoca
@albinoman887
@emdroidle
@Rashed97
@joshuous
@RenderBroken
and many others!
<< If you like my work here is my hat, please donate! >>

XDA:DevDB Information
Gamma Kernel, Kernel for the LG V20
Contributors
Omar-Avelar
Source Code: https://github.com/oxavelar/V20-Kernel-Gamma
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: 9.0.0
Stable Release Date: 2019-09-21
Created 2019-06-16
Last Updated 2019-09-21

CHANGELOG
9.0.0 - Increased responsiveness by adjusting input boost and stune values. Updated the thermal mod values again, revert LA.UM.6.5.r1-11700-8x96.0 to fix green tint crashes and updated to AnyKernel3.
8.0.0 - Merging LA.UM.6.5.r1-11700-8x96.0.
7.0.0 - Update SDCARDFS driver. And updated the thermal mod values to account for GPU undervolt.
5.0.1 - Re-enabled -O3 optimizations and increased little cores boost.
5.0.0 - Compiled with Linaro GCC 8.3.
3.2.0 - Biased a little towards better performance and keeping power consumption almost intact.
3.0.0 - Working camera with Lineage OS 16.0, and extended screen with notch enabled.

Damn we missed u omar! Thanks for this!

Second screen!?

Omar-Avelar said:
CHANGELOG
3.0.0 - Working camera with Lineage OS 16.0, and extended screen with notch enabled.
Click to expand...
Click to collapse
H918: installed all 3 recommended zip files. Definitely a great improvement. Much cooler phone. Been waiting for this one Omar. Thank you.

Thank you for your amazing work @Omar-Avelar keep up the good work!A suggestion tho,wouldn't be better to switch on a newer GCC version i think it would be a help to you work as 9.1 which is the latest one has many improvements over the previews versions.

All is well.

VS995 Bugs
Thank you so much for this awesome kernel, makes the V20 usable ? Only bugs I'm seeing are no flashlight and camera.
Update: They both work now! Not sure what I did but I'm glad I did it lol

any way to use this on an F800L V20?
It's running the US996DS version of LOS16 perfectly, but Gamma Kernel cannot be installed as-is
did do.devicecheck=0, worked

How is everyone getting the camera to work? Nothings detecting it on my US996-DS...
Edit: [NVM I'm retarded]

Unfortunately, it made my phone even laggier, scrolling was laggier and everything felt worse, I even did a clean install of LOS 16 and it was the same, I don't know if I installed it wrong, I installed the ROM, then gapps, then the kernel and the add ons, and finally magisk. Is there anything I can do to fix this issue?

Nachitoo said:
Unfortunately, it made my phone even laggier, scrolling was laggier and everything felt worse, I even did a clean install of LOS 16 and it was the same, I don't know if I installed it wrong, I installed the ROM, then gapps, then the kernel and the add ons, and finally magisk. Is there anything I can do to fix this issue?
Click to expand...
Click to collapse
No offense but you should try go to nougat stock and do the dirty santa process all over again.

karkand said:
No offense but you should try go to nougat stock and do the dirty santa process all over again.
Click to expand...
Click to collapse
I have a H918 a T-Mobile variant though.
---------- Post added at 06:21 AM ---------- Previous post was at 06:21 AM ----------
karkand said:
No offense but you should try go to nougat stock and do the dirty santa process all over again.
Click to expand...
Click to collapse
I went back to Lineage 15.1, and it was faster again.

The phone touch becomes unresponsive at times many users have reported that on LOS 16 i thought posting it here as possibly is kernel related as with stock lineage never had this issue even on the latest build.Again thanks for your work!

Will any kernel work correctly on V20 F800L?

So I just flashed the most recent version onto my 710 running rr and now my display extends up into my second display except theres a notch where the camera is. Is this supposed to be a feature or have I done something wrong? Am I missing something?
---------- Post added at 08:54 PM ---------- Previous post was at 08:50 PM ----------
Also those who said their camera and flashlight weren't working, what did you do to fix?
Figured it out. I was flashing gamma for the wrong Los version. It's hard to tell when you're on a rom that doesn't state who their base version is. My bad guys

There are v3.2 and v4.0 in download, what's different?

ryo2456 said:
There are v3.2 and v4.0 in download, what's different?
Click to expand...
Click to collapse
same question here.
Exists a changelog?

avilav said:
same question here.
Exists a changelog?
Click to expand...
Click to collapse
He will add tho he must have done the builds in a hurry and released them for us I'm on v4 what I see is that phone doesn't become unresponsive anymore

Running lineage-16.0-20190625-X86CPU-h910.zip with the latest OpenGApps and v4 plus all the recommendeds from the OP.
I have Bluetooth connection issues with my car stereo/hands free.
What can I provide to help troubleshoot?
* I will be reflashing with the same config minus the v4 kernel just to be sure that's the issue.
Sent from my LG-h910 using Tapatalk

Better Mobile App

welcome