Question TWRP for Narzo 30a - Realme Narzo 30A / Narzo 20 / Realme Realme 7i EU

So i just install TWRP earlier, i was able to use it earlier. Then i reboot to system. My problem is how do i go back to TWRP? When i turn off my phone and i press volume down + power, it only goes to fastboot mode. When i press volume up + power it only reboot to system...

Where did you find TWRP

khevyn74 said:
So i just install TWRP earlier, i was able to use it earlier. Then i reboot to system. My problem is how do i go back to TWRP? When i turn off my phone and i press volume down + power, it only goes to fastboot mode. When i press volume up + power it only reboot to system...
Click to expand...
Click to collapse
why don't you try " adb reboot recovery command"

Related

[Q] Flashed new ROM without emptying cache. Can't enter recovery mode. HELP

Hi all
I have used search and I can find results that pertain to other devices but not specifically Galaxy S3 (I9300).
I've been trying to flash a new ROM onto my phone.
To do this:
- I rooted the phone using Odin and installed CF Root + CWM package.
- After doing this, I did the 3 button reset to enter Recovery mode. However, the phone always entered into Download Mode (Odin Mode / "Downloading... Do not turn off target !!"). I was never able to enter Recovery mode.
- So I couldn't use the Recovery mode to install the ROM.
- Instead, I used ROM Manager to do the install (Cyanogen 9) but I did this without clearing the cache.
The result:
- Now if I leave the phone to boot, it enters Cyanogen 9 boot screen but stuck here looping.
- if I try to enter recovery mode to clear the cache, it only gives me download screen.
I've tried a few different uploads to get recovery mode (and it successfully uploads the files I send using Odin) however the phone still enters download mode after the flash.
I'm worried about doing the wrong steps if I follow advice from other sub-forums relating to other devices.
Any tips?
Many thanks.
ckkl said:
Hi all
I'm worried about doing the wrong steps if I follow advice from other sub-forums relating to other devices.
Any tips?
Many thanks.
Click to expand...
Click to collapse
The three button reset is power button + Home + Volume up to enter into recovery..
You are going to Download mode because you are pressing Power button + Home + Volume down key ...
Read this guide
Recovery mode is volume up while pressing home and then power.
Try this first and see if you can access recovery, if not then flash Philz recovery via odin and then boot into it to clear data, cache etc.
Make sure you read and understand how to use both odin and recovery before you start, otherwise you can brick your phone.
MoonBlade said:
The three button reset is power button + Home + Volume down to enter into recovery..
You are going to Download mode because you are pressing Power button + Home + Volume Up key ...
Read this guide
Click to expand...
Click to collapse
Thanks MoonBlade.
Funnily, I was pressing power + home + volume down to get download mode.
I tried pressing power + home + volume up, which successfully got me into recovery mode.
Strangely reversed.
This seems to have resolved the problem.
ckkl said:
Thanks MoonBlade.
Funnily, I was pressing power + home + volume down to get download mode.
I tried pressing power + home + volume up, which successfully got me into recovery mode.
Strangely reversed.
This seems to have resolved the problem.
Click to expand...
Click to collapse
sorry man this is the right way.. I got confused while writing my earlier post .. corrected it now

[Q][P] Can't boot into TWRP recovery mode

My phone is P, after install rom 5.0.2 ( don't know how i can boot into TWRP recovery mode to install that rom )
After that, i want to install gapps. I tried to boot into recovery mode by turn off my phone then turn it back and spam vol up but it can't go into recovery mode. Instead, my phone boot normal ( i tried the combination power vol down but it just can't )
Before, i can go into recovery mode easily which the power vol up
Thanks everyone for reading this post! Sorry if my english is bad because it not my 1st language
You spam volume down for recovery
\o/ said:
You spam volume down for recovery
Click to expand...
Click to collapse
I´ve been showing the same problem as this guy.
After install room 5.0.2 I reboot the system and can´t get in again into recovery mode to install gapps.
I tried all combinations power and vol+, power and vol -, power and vol + and - than press repeatilly. Nothing works.
Any ideas?

Device not goes to recovery/fastboot

Today i had flashed latest china dev fastboot ROM in Redmi Note 3 SD.
After succesfull flashed i had flashed TWRP 3.0.2-2
Then wiped all & flashed RR N.
Whenever i tap reboot to recovery or reboot to fastboot from power menu, Device starts normally not in recovery or fastboot.
Tried 3-4 times by flashing TWRP via fastboot mode but every time whenever i want to go recovery or fastboot i must have to press vol+ & power or vol- & power simultaniously.
Any Solution...?
Power key + volume up for recovery mode.
Power key + volume down for fastboot mode.
Edit: Sorry, I misread the question. I think it is a ROM problem.

[SOLVED] Getting into Recovery on the Mi Pad 2 [Latte]

So I've been putting custom ROMs on devices for years and I've never had this problem before.
Problem: I can't get into Recovery (TWRP) after I've flashed it but before MIUI restores stock recovery.
I've tried:
1) Holding Vol Up + Power as I hit "fastboot reboot"<Enter> in fastboot
2) Running the power down while in fastboot, giving it a little charge, and then holding Vol Up + Power
3) Locking the bootloader and trying both 1 & 2 again
Result
- Without locking the bootloader I get the "unlocked bootloader" message, have to hit Vol UP and then it boots into System
- With a locked bootloader it ignores my "Vol Up + Power" altogether and just boots into System
For the fun of it I tried Vol Down + Power (to get into fastboot) and had the same problem. Funny thing is if I flash back to stock, VOL UP + POWER gets me into recovery just fine.
Any ideas?
Flash the TWRP
udaan said:
Flash the TWRP
Click to expand...
Click to collapse
Not very helpful. Problem is not flashing TWRP but getting into it. Bu thanks.
Getting into Recovery on the Mi Pad 2 [Latte] [SOLVED]
LinuxLowell said:
So I've been putting custom ROMs on devices for years and I've never had this problem before.
Problem: I can't get into Recovery (TWRP) after I've flashed it but before MIUI restores stock recovery.
I've tried:
1) Holding Vol Up + Power as I hit "fastboot reboot"<Enter> in fastboot
2) Running the power down while in fastboot, giving it a little charge, and then holding Vol Up + Power
3) Locking the bootloader and trying both 1 & 2 again
Result
- Without locking the bootloader I get the "unlocked bootloader" message, have to hit Vol UP and then it boots into System
- With a locked bootloader it ignores my "Vol Up + Power" altogether and just boots into System
For the fun of it I tried Vol Down + Power (to get into fastboot) and had the same problem. Funny thing is if I flash back to stock, VOL UP + POWER gets me into recovery just fine.
Any ideas?
Click to expand...
Click to collapse
So I figured it.. reading a post in the MIUI forum (XDA won't let me include the link), I found the following:
Turn off your Mi Pad 2, Press power button to turn on Mipad 2, when MI LOGO appeared, immediately Hold down VOL UP and VOL DOWN until you see the yellow line DNX FASTBOOT MODE appears, release the buttons.
Click to expand...
Click to collapse
My problem was I was pressing both buttons at the same time as I do with my other devices. Solution is 1) Press power button, 2) wait for MI logo to appear in the center of the screen, 3) Press VOL UP. Voila!

How to boot directly into TWRP

I unlocked the tablet and installed successfully TWRP on my Xiaomi Mi Pad 4.
But when I reboot it with volume down and power it always goes into smartboot.
Only way to go to TWRP is from console Fastboot boot twrp.img, but it does not always work
How can i boot directly into TWRP ?
Thanks.
You press the wrong key. To access recovery, you must hold Volume up + Power.

Categories

Resources