is there any way to revive my phone thank you so much
TTvPH said:
is there any way to revive my phone thank you so much
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/reflash-poco-f2-pro-with-qfil-through-edl.4386869/
TTvPH said:
is there any way to revive my phone thank you so much
Click to expand...
Click to collapse
Flash whith spflashtool + mtk bypass tool
strike.strong said:
Flash whith spflashtool + mtk bypass tool
Click to expand...
Click to collapse
there's still chance to restore your phone. i can send you links on how to
Download All Links here:
SP Flash Tool: https://mega.nz/file/G4VnxTKa#_uq8YdL3VS-ilO_cVIDv2zb4RRiVwCgnLlK_xS4uJo8
MTK META Utility: https://mega.nz/file/u4cwzRgL#n15IAtntMiPz_W2wB1Yb6j8yXvb86V2dzLesT6nOnnY
POCO X3 GT Original Firmware + Tutorial: https://romprovider.com/poco-x3-gt-firmware-support/
(MEGA Links are mine for easy download and no corruption)
Download the firmware first before the tools
After downloading all the files above, do this
1. Extract the firmware into your desktop
2. Extract SP Flash Tool into your desktop
3. Run SP Flash Tool and MTK META UTILITY
4. On SP Flash Tool, Locate for Scatter Loading file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Press Choose
5. Locate the scatter file in your extracted firmware
SP Flash Tool will Look like this
6. Run MTK META Utility
7. Press "Disable Auth
8. Long press VOL Up And connect to pc (Check Device Manager Until you see Mediatek USB Port (COMx). If you didn't see it, Download the Mediatek Drivers: https://androidfilehost.com/?w=files&flid=216849 )
If it detected, It will say this on logs:
9. Press Download (NOTE: Just select DOWNLOAD ONLY. DO NOT SELECT "FORMAT-DOWNLOAD" or your IMEI and MAC ADDRESS WILL BE GONE FOREVER!!!)
have some coffee while flashing
If it succeeded, the OK Window will POPUP
Long press power button to reboot until the poco logo shows up. It will reboot to FASTBOOT (aka. Bootloader)
While you're at it and if you have platform_tools,
10. Copy contents in platform tools and transfer to the firmware folder (or copy the insides of the firmware folder and paste it in platform_tools folder)
it will look like this
(don't mind the gms.apk cause i accidentally added there but there's no gms.apk on yours)
11. Run flash_all.bat and wait until the phone reboots.
if it rebooted, it should've reboot to miui.
that's how i restored my phone.
pls reply if it works to you too...
edcyrey said:
Download All Links here:
SP Flash Tool: https://mega.nz/file/G4VnxTKa#_uq8YdL3VS-ilO_cVIDv2zb4RRiVwCgnLlK_xS4uJo8
MTK META Utility: https://mega.nz/file/u4cwzRgL#n15IAtntMiPz_W2wB1Yb6j8yXvb86V2dzLesT6nOnnY
POCO X3 GT Original Firmware + Tutorial: https://romprovider.com/poco-x3-gt-firmware-support/
(MEGA Links are mine for easy download and no corruption)
Download the firmware first before the tools
After downloading all the files above, do this
1. Extract the firmware into your desktop
2. Extract SP Flash Tool into your desktop
3. Run SP Flash Tool and MTK META UTILITY
4. On SP Flash Tool, Locate for Scatter Loading file
View attachment 5632675
Press Choose
5. Locate the scatter file in your extracted firmware
View attachment 5632677
SP Flash Tool will Look like this
View attachment 5632681
6. Run MTK META UtilityView attachment 5632683
7. Press "Disable Auth
View attachment 5632685
8. Long press VOL Up And connect to pc (Check Device Manager Until you see Mediatek USB Port (COMx). If you didn't see it, Download the Mediatek Drivers: https://androidfilehost.com/?w=files&flid=216849 )
If it detected, It will say this on logs:
View attachment 5632687
9. Press Download (NOTE: Just select DOWNLOAD ONLY. DO NOT SELECT "FORMAT-DOWNLOAD" or your IMEI and MAC ADDRESS WILL BE GONE FOREVER!!!)
View attachment 5632689
have some coffee while flashing
If it succeeded, the OK Window will POPUP
View attachment 5632691
Long press power button to reboot until the poco logo shows up. It will reboot to FASTBOOT (aka. Bootloader)
While you're at it and if you have platform_tools,
10. Copy contents in platform tools and transfer to the firmware folder (or copy the insides of the firmware folder and paste it in platform_tools folder)
it will look like this
View attachment 5632693
(don't mind the gms.apk cause i accidentally added there but there's no gms.apk on yours)
11. Run flash_all.bat and wait until the phone reboots.
if it rebooted, it should've reboot to miui.
that's how i restored my phone.
pls reply if it works to you too...
Click to expand...
Click to collapse
its me posting this problem i forgot my old account but anyways ill try later i hope its fixed my phone and i let you know thank you so much
JEB ALEGROSO said:
its me posting this problem i forgot my old account but anyways ill try later i hope its fixed my phone and i let you know thank you so much
Click to expand...
Click to collapse
let me know if it works <3
edcyrey said:
let me know if it works <3
Click to expand...
Click to collapse
how to fixed this
edcyrey said:
Download All Links here:
SP Flash Tool: https://mega.nz/file/G4VnxTKa#_uq8YdL3VS-ilO_cVIDv2zb4RRiVwCgnLlK_xS4uJo8
MTK META Utility: https://mega.nz/file/u4cwzRgL#n15IAtntMiPz_W2wB1Yb6j8yXvb86V2dzLesT6nOnnY
POCO X3 GT Original Firmware + Tutorial: https://romprovider.com/poco-x3-gt-firmware-support/
(MEGA Links are mine for easy download and no corruption)
Download the firmware first before the tools
After downloading all the files above, do this
1. Extract the firmware into your desktop
2. Extract SP Flash Tool into your desktop
3. Run SP Flash Tool and MTK META UTILITY
4. On SP Flash Tool, Locate for Scatter Loading file
View attachment 5632675
Press Choose
5. Locate the scatter file in your extracted firmware
View attachment 5632677
SP Flash Tool will Look like this
View attachment 5632681
6. Run MTK META UtilityView attachment 5632683
7. Press "Disable Auth
View attachment 5632685
8. Long press VOL Up And connect to pc (Check Device Manager Until you see Mediatek USB Port (COMx). If you didn't see it, Download the Mediatek Drivers: https://androidfilehost.com/?w=files&flid=216849 )
If it detected, It will say this on logs:
View attachment 5632687
9. Press Download (NOTE: Just select DOWNLOAD ONLY. DO NOT SELECT "FORMAT-DOWNLOAD" or your IMEI and MAC ADDRESS WILL BE GONE FOREVER!!!)
View attachment 5632689
have some coffee while flashing
If it succeeded, the OK Window will POPUP
View attachment 5632691
Long press power button to reboot until the poco logo shows up. It will reboot to FASTBOOT (aka. Bootloader)
While you're at it and if you have platform_tools,
10. Copy contents in platform tools and transfer to the firmware folder (or copy the insides of the firmware folder and paste it in platform_tools folder)
it will look like this
View attachment 5632693
(don't mind the gms.apk cause i accidentally added there but there's no gms.apk on yours)
11. Run flash_all.bat and wait until the phone reboots.
if it rebooted, it should've reboot to miui.
that's how i restored my phone.
pls reply if it works to you too...
Click to expand...
Click to collapse
Thankyou so much. it works on my poco x3 gt i unbricked it heheh
JEB ALEGROSO said:
View attachment 5705983
como consertar isso
Click to expand...
Click to collapse
conseguiu resolver? Eu tenho o mesmo problema
Mod translation: managed to solve? I have the same problem
pode atualizar os links? meu driver fica ligando e desligando como resolver?
Mod translation: can you update the links? my driver keeps turning on and off how to solve?
gnavas13 said:
Mod translation: can you update
Click to expand...
Click to collapse
Greetings. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
-Regards: Badger50
Related
MOD EDIT: Thread closed for failure to give proper credits and using download hosts we don't accept. For more info, see our forum rules.
OP, please contact me when you can if you'd like this thread reopened.
Users may also want to see this thread, by the MTK Droid Tools author.
We often try new stuffs on our Android device...But sometimes we may get into material which is not meant for our device and it may result in BRICKING of your phone...So here is the process which would help you get rid of any such problem as after doing this process you would have a backup saved of your ROM and can flash it anytime even if you had bricked your device...
This process will show you how to make CWM recovery of your android phone and also how to backup you Stock/Custom Rom so that even if you brick your mobile you have a backup ready to pump in life again into it...
Before starting..
1. Make sure you have the drivers installed for your Android Device..This whole process depends on it!!
You will need below softwares on your windows to start with this process.
1. SP FLASH TOOL V 3.1224 MOD EDIT: Link removed (download host requires registration).
2. MTKDroid Tools V2.4.8 MOD EDIT: Link removed (download host requires registration).
STEP 1
>>Enable USB DEBUGGING on your devise.
>>Connect to computer via USB cable
>>Open MTK DROID root tools.exe and it will show your device settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 2
>> Click on "Blocks Map" which should show something like below;
STEP 3
>> Click "Create Scatter File" and save it. Do not change name or anything. By default, the MTK droid Tools will go to save inside the extracted MTKdroid folder. Thats fine.
STEP 4
>>Open SP flasher
>> Click "scatter-loading" and select the scatter file you saved in step 3
After selecting....
STEP 5
>> click "Read Back" tab on SP Flasher
STEP 6
>>click "Add" button
A new entry will appear (see below)
STEP 7
>>Double Click "N/A" entry
This will save the your current ROM file. Choose a location to save...
TIP: "ROM_" should be in start of the name.. Eg: ROM_myrom"
After you click save, below box will open. choose"Hex" as below..and keep the window open
STEP 8
>> Open the Scatter file you created in STEP 3. You can use any text editor. Search for the term "CACHE" in the document; which will have a numbering to it like 0x227e800. Copy this number from your scatter file (In some case it shows linear & Physical...Copy linear number)
PASTE the number into the window for "Length" entry and click OK.
STEP 9
>> Disconnect your device from the computer
>> Switch the device off.
>> Click "Read Back" on the SP flasher window (see below)
>> Quickly connect the switched off device to computer via USB cable NOW!
TIP: This will start reading your ROM and might take some time. So be patient. When process is complete, remove your phone from the computer and turn it on with USB debugging enabled. All the while, keep SP Flasher Window open as it was (DO NOT CLOSE).
STEP 10
>> Open MTK Droid Root & tools app and choose "root, Backup, recovery" TAB as below
>> Click on "To process file ROM_from flash tool" button and it will open your directory..
>> Choose the "ROM_......" file you saved in STEP 7 >> Click open.
This will start processing the ROM file for installing clockworkMOD. A notice will flash asking to make CWM recovery.. Click Yes!
You will see messages popping up in the right side pannel of MTK Droid Root & tools app. The process will take around 5 minutes to finish. Wait until finish. Keep as it is.
IMPORTANT: This will save the "Scatter-Loading" & Custom recovery File you will need in STEP 12 & 14 It will be in Droid Root & Tools folder/Backup.
STEP 11
>> GO back to SP Flasher window
>> Click "Download" TAB
STEP 12
>> Click "Scatter-Loading" and select the Scatter file created by MTK Droid Root & Tools in Step 10. (should be in Droid Root & Tools/Backup folder) Do not use the scatter file made in Step 1)
STEP 13
>> Deselect ALL checkboxes, except for the RECOVERY one, double click the RECOVERY entry
STEP 14
>> Select the recovery image
>> Click "open".
Note: This is the file saved from Step 10.
Now everything is set up for flashing...
STEP 15
>> Disconnect devise from Computer
>> Switch off device
>> Click on "Download" TAB in SP flasher. (this will start searching for device to flash)
>> Connect your devise switched off!
Warning like below will be seen. But you are flashing only the recovery... (good thing is you also got a back up of your rom!!)
ENJOY!
Please DONATE or HIT THANKS if you liked my post..
Feel free to post your querries...
MTK droid tools 2.5.3
http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip
hemal7980 said:
We often try new stuffs on our Android device...But sometimes we may get into material which is not meant for our device and it may result in BRICKING of your phone...So here is the process which would help you get rid of any such problem as after doing this process you would have a backup saved of your ROM and can flash it anytime even if you had bricked your device...
ENJOY!
Please DONATE or HIT THANKS if you liked my post..
Feel free to post your querries...
Click to expand...
Click to collapse
It is common practice here on XDA that when you post someone else's work you should give them proper credit, Rua1 is the dev that made MTK Droid Tools. Instead of linking to his (now dead) direct download link you could have just linked to his thread. Also - this exact same info has already been posted a few years back by Rua1 himself:
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Do we really need another?
Failed To Open COM Port
I don't respond for What-So-Ever done any damage to your Phone, You must accept this risk with yourself.
Hi all,
I'm proud to present my useful tools. SRK Tool ,it's a tools for noob and advance user.This tool is connecting between LG G3 and computer that is a reason you must Enable USB Debugging mode befor use SRKTool
Download link SRKtool_1.0.5_droidth.zip:
SRKtool_1.0.5_droidth.zip
Download link SRKtool_1.0.4_droidth.zip:
SRKtool_1.0.4_droidth.zip
Download link SRKtool_1.0.3_droidth.zip:
SRKtool_1.0.3_droidth.zip
Download link SRKtool_1.0.2_droidth.zip:
SRKtool_1.0.2_droidth.zip
Change logs:
1.0.5
ROOT
- ROOT+TWRP For F320S/L/K
BACKUP
- Backup Sensor
- Backup Cust
- Backup All importance partition
Utility
- Nuke Download Mode - (When No Recovery,Can't Boot)
- Fix Recovery Mode - via fastboot mode (When No Recovery,Can't Boot) (ALL Variant)
Other
- Change 7z to 7-Zip Extra (Highest compression ratio/Fast compression) Support 32bit/64bit Windows
1.0.4
- Send Command (Spacial Mode for fix device)- NEED DOWNLOAD MODE.
- New Bump Kernel (30e) for D802
- Fix bug and improving program Make it's stable
- Redegin UI Program
1.0.3
- Adding Fix fastboot mode started
- How to Flash KDZ/TOT/Extract KDZ
- Check current firmware
- Link to firmware KDZ warehouse
1.0.2
- Adding feature ROOT+TWRP for LGG3 F400S
- Adding ADB Sideload for install ROM
- VDO Recording screen
- Screen Capture
- Reboot Device
- Update adb to the newest version
1.0.1
- Adding feature ROOT+TWRP for LGG3 D855
1.0
- initial version
Click to expand...
Click to collapse
How to use
1. Download the Unzip
SRKtool_1.0_droidth
2. Enable Debugging mode
3. Plug g3 into Computer
4. Run srktool.exe
5. Enjoy
If you got "MSVCR100.dll is missing" error, install Visual C++ Redistributable.
Download: 32 bit / 64 bit.
64 bit users, install both 32 and 64.
What is SRKTool can do ?
1. In picture as below it's a basic function that you can use very easy. All function I have tested .It is work very well.
- ROOT KitKat/Lollipop Stock Firmware.
- ROOT AND TWRP Lollipop Stock Firmware (LGG2-D802/801,LGG3-D855).
- Enter to Download Mode.
- Leave Downloadmode.
- Enter to Recovery Mode.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. For Advance User [Not For NOOB]
- Nuke Download Mode (Advance User REQUIRE)
- Fix Download Mode - From Nuke Download Mode (Advance User REQUIRE)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Nuke Download Mode make your g3 can't enter to Download Mode But you can enter fastboot mode instead. In fastboot Mode you can fix or use fastboot command to flash all partition of LG g3 Maybe you have to you in spacial.
Before a program nuke Download Mode it will be backup your Download Mode in file backup-laf\backup_droidth-laf.img.You can fix Download Mode from menu Fix Download Mode - From Nuke Download Mode (Advance User REQUIRE)
3. You can make BUMP Kernel for developer
- Make BUMP Kernel (ROOT REQUIRE)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
After unzip SRKtool_1.0.1_droidth find folder
droidth_bump\bump\boot_original
Click to expand...
Click to collapse
Put boot.bin (stock kernel) in that folder then run program after program process complete bump kernel will be stay at
droidth_bump\bump\boot_original\boot_bump
Click to expand...
Click to collapse
4. For Backup and Create your flash-able zip from your current ROM
Backup Fota Partition (ROOT REQUIRE)
Backup BaseBand (ROOT REQUIRE)
Backup EFS Partition (IMEI) (ROOT REQUIRE)
Backup BOOTLOADER (ROOT REQUIRE)
Create your flash-able zip from your current ROM (ROOT REQUIRE)
Click to expand...
Click to collapse
After run program .img file that is a output from other process will be stay at
droidth_input\baseband
droidth_input\bootloader
droidth_input\efs
droidth_input\rom
droidth_input\fota
Click to expand...
Click to collapse
and flashable file which you can get it to flash via Custom Recovery it will be stay at
droidth_output
Click to expand...
Click to collapse
5. Another folder DO NOT TOUCH IT
Thank you,
ขอบคุณครับ (In Thai language)
Credit:
1. @Unjustified Dev for send_command
2. @avicohh One Root Script
3. @Skin1980on line bump
4. @jac10000 partition name LG G3
For. any question that want to ask me in private Please Leave a question in facebook group
https://www.facebook.com/groups/1420724551528661/
......... DON'T INBOX TO ME .........
@somboons your tool is awesome ! Very good work, very useful.
Thank you
@somboons: Please change extention of srktool101 to *.bat to modified for F400 variants? Thank anyway!
looks very usefull and great to have
thx alot
Reserved
Στάλθηκε από το MI 2S μου χρησιμοποιώντας Tapatalk
Any chance of getting support for the f460 (G3 Cat6) series? What files would you need (or that i could swap out) to make it happen?
@somboons : you're tool seems to be awesome, but I got one issue; it doesn't detect my phone; it stays on "waiting for device". But when I launch for example "adb devices" in a command prompt, it detects my phone. I got all drivers installed, adb, my phone is rooted, has usb debugging enable. Do you know issue's source?
somboons said:
I don't respond for What-So-Ever done any damage to your Phone, You Accept this risk.
Hi all,
I'm proud to present my useful tools. SRK Tool ,it's a tools for noob and advance user.This tool is connecting between LG G3 and computer that is a reason you must Enable USB Debugging mode befor use SRKTool
Download link SRKtool_1.0.1_droidth.zip:
http://bit.ly/1D8EBI0
How to use
1. Download the Unzip
SRKtool_1.0_droidth
2. Enable Debugging mode
3. Plug g3 into Computer
4. Run srktool.exe
5. Enjoy
What is SRKTool can do ?
1. In picture as below it's a basic function that you can use very easy. All function I have tested .It is work very well.
2. For Advance User [Not For NOOB]
Nuke Download Mode make your g3 can't enter to Download Mode But you can enter fastboot mode instead. In fastboot Mode you can fix or use fastboot command to flash all partition of LG g3 Maybe you have to you in spacial.
Before a program nuke Download Mode it will be backup your Download Mode in file backup-laf\backup_droidth-laf.img.You can fix Download Mode from menu Fix Download Mode - From Nuke Download Mode (Advance User REQUIRE)
3. You can make BUMP Kernel for developer
After unzip SRKtool_1.0.1_droidth find folder
Put boot.bin (stock kernel) in that folder then run program after program process complete bump kernel will be stay at
4. For Backup and Create your flash-able zip from your current ROM
After run program .img file that is a output from other process will be stay at
and flashable file which you can get it to flash via Custom Recovery it will be stay at
5. Another folder DO NOT TOUCH IT
Thank you,
ขอบคุณครับ (In Thai language)
Credit:
1. @Unjustified Dev for send_command
2. @avicohh One Root Script
3. @Skin1980on line bump
4. @jac10000 partition name LG G3
For. any question that want to ask me in private Please Leave a question in facebook group
https://www.facebook.com/groups/1420724551528661/
......... DON'T INBOX TO ME .........
Click to expand...
Click to collapse
Post^^
Thank you. This worked on my LG G3 D855 running Lollipop 5.0
casual_kikoo said:
@somboons : you're tool seems to be awesome, but I got one issue; it doesn't detect my phone; it stays on "waiting for device". But when I launch for example "adb devices" in a command prompt, it detects my phone. I got all drivers installed, adb, my phone is rooted, has usb debugging enable. Do you know issue's source?
Click to expand...
Click to collapse
Try to manual enter to download mode. then capture screen of device manager to me just like this
somboons said:
Try to manual enter to download mode. then capture screen of device manager to me just like this
Click to expand...
Click to collapse
Here the capture screen:
Edit: When I manually enter in Download Mode, your app detects my phone, but when I ask to your app to enter my phone in Download Mode, same issue: not detected
casual_kikoo said:
Here the capture screen:
Edit: When I manually enter in Download Mode, your app detects my phone, but when I ask to your app to enter my phone in Download Mode, same issue: not detected
Click to expand...
Click to collapse
Make sure u plug phone only in usb port. Remove all device that plug in usb port. Can you show Ports in device manager ?
somboons said:
Make sure u plug phone only in usb port. Remove all device that plug in usb port. Can you show Ports in device manager ?
Click to expand...
Click to collapse
My device manager, sorry I upload wrong picture...
casual_kikoo said:
My device manager, sorry I upload wrong picture...
Click to expand...
Click to collapse
it doesn't detect your phone,re-install driver again.
Revert backup to 1.0.1 it can't ROOT+TWRP on F400L/K.
This tool is working for F400S on Lollipop rom.
Works perfect with D855 16GB T-Mobile Germany...
Rooted + TWRP on V20H...i can´t believe it :laugh::laugh::laugh:
Thank you for this great Toolkit :good::good::good:
thanks sooooooo much for Easy method @somboons
Thank you
TWRP, installed on D855 stock lollipop.
casual_kikoo said:
Here the capture screen:
Edit: When I manually enter in Download Mode, your app detects my phone, but when I ask to your app to enter my phone in Download Mode, same issue: not detected
Click to expand...
Click to collapse
In my case , my computer don't have msvcr100.dll , after install it , everything working.
good work!!
I am trying to Flash my OPPO A5S CPH1909 To Downgrade ColorOS. The new ColorOS security patch removed my ROOT and now I'm troubling to root my phone again. I am trying to FLASH ROM to downgrade My ColorOS.
1ST I was download Lower Version ColorOS then try to Install it using recovery mode but phone says you are trying to install older version.
THEN
I was download ROM(FLASH FILE) and MSM DOWNLOAD TOOL v4 but this flashing tool not detect any ports - I'm stuck here now
I'm Using :-
Windows 10 Enterprise LTSC
MSI Gaming Pro Motherboard
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
theRiyazSaifi said:
I am trying to Flash my OPPO A5S CPH1909 To Downgrade ColorOS. The new ColorOS security patch removed my ROOT and now I'm troubling to root my phone again. I am trying to FLASH ROM to downgrade My ColorOS.
1ST I was download Lower Version ColorOS then try to Install it using recovery mode but phone says you are trying to install older version.
THEN
I was download ROM(FLASH FILE) and MSM DOWNLOAD TOOL v4 but this flashing tool not detect any ports - I'm stuck here now
I'm Using :-
Windows 10 Enterprise LTSC
MSI Gaming Pro Motherboard
Click to expand...
Click to collapse
I've faced a similar problem an this is how i solved it .DOWNGARDED FROM A.41 FIRMWARE TO A.34
download:
1) sp flash tool
2)oppo A5S firmware (should be software flashable not OTA ZIP)
3) oppo opf file extractor
4) oppo DAA&SLA BYPASS TOOL
5)MEDIATEK DRIVERS
6)oppo a5s da file
7)python
Battery should be sufficiently charged .
in the downloaded firmware extract the big file with the .opf extension using oppo opf extractor, make sure you select your phone type as mtk to get firmware with scatter file.
install python and run the bat file in the oppo DAA&SLA BYPASS TOOL folder this will diasble security allowing you to use custom DA.Assuming you have installed mediatek device drivers the python program will connect to your phone but you have to switch it off first.
Press both volume butttons at the same time and connect it to pc
once the program has ran succsessfully close the window. DO NOT DISSCONECT THE PHONE FROM PC
OPEN sp flashtool and the device manager loader the scatter file from the firmware you extracted and the custom da. use DOWNLOAD OPTION untick the FOLLOWING file to prevent errors while flashing "opporeserve2".
check in device manager the comport to which the phone is connected in the options tab of the sp flash tool open and click on connection adjust the comport N.O to the one of the phone
press start to begin flashing and wait for the process to finish
NB: FIRMWARE CAN BE FOUND VIA GOOLE
DAA&SLA BYPASS TOOL
-https://romprovider.com/bypass-daa-sla-protection-oppo/
oppo opf file extractor
-https://www.martview-forum.com/threads/ofp-file-extractor-without-any-device.39292/(FILE requires registration its free also turn off antivirus)
sp flashtool and da file
-https://mega.nz/file/otAiUL6I#47l3iSgfWhMv-Iq1SygVsPZhDdbRPaeMHCobCqV2gXg
tutorial for reference
A)how to flash the phone
-https://www.youtube.com/watch?v=PMZYmszOcN0
-https://www.youtube.com/watch?v=cnqDxfvEnaA
B)how to extract firmware
-https://www.youtube.com/watch?v=qoK-K4XwlVM&t=0s
DISCLAIMER:you do this at your own risk AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE.
open the above links and understand every thing and watch all videos closely FOR BEST RESULTS
GOODLUCK
sammy_craig35 said:
I've faced a similar problem an this is how i solved it .DOWNGARDED FROM A.41 FIRMWARE TO A.34
download:
1) sp flash tool
2)oppo A5S firmware (should be software flashable not OTA ZIP)
3) oppo opf file extractor
4) oppo DAA&SLA BYPASS TOOL
5)MEDIATEK DRIVERS
6)oppo a5s da file
7)python
Battery should be sufficiently charged .
in the downloaded firmware extract the big file with the .opf extension using oppo opf extractor, make sure you select your phone type as mtk to get firmware with scatter file.
install python and run the bat file in the oppo DAA&SLA BYPASS TOOL folder this will diasble security allowing you to use custom DA.Assuming you have installed mediatek device drivers the python program will connect to your phone but you have to switch it off first.
Press both volume butttons at the same time and connect it to pc
once the program has ran succsessfully close the window. DO NOT DISSCONECT THE PHONE FROM PC
OPEN sp flashtool and the device manager loader the scatter file from the firmware you extracted and the custom da. use DOWNLOAD OPTION untick the FOLLOWING file to prevent errors while flashing "opporeserve2".
check in device manager the comport to which the phone is connected in the options tab of the sp flash tool open and click on connection adjust the comport N.O to the one of the phone
press start to begin flashing and wait for the process to finish
NB: FIRMWARE CAN BE FOUND VIA GOOLE
DAA&SLA BYPASS TOOL
-https://romprovider.com/bypass-daa-sla-protection-oppo/
oppo opf file extractor
-https://www.martview-forum.com/threads/ofp-file-extractor-without-any-device.39292/(FILE requires registration its free also turn off antivirus)
sp flashtool and da file
-https://mega.nz/file/otAiUL6I#47l3iSgfWhMv-Iq1SygVsPZhDdbRPaeMHCobCqV2gXg
tutorial for reference
A)how to flash the phone
-https://www.youtube.com/watch?v=PMZYmszOcN0
-https://www.youtube.com/watch?v=cnqDxfvEnaA
B)how to extract firmware
-https://www.youtube.com/watch?v=qoK-K4XwlVM&t=0s
DISCLAIMER:you do this at your own risk AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE.
open the above links and understand every thing and watch all videos closely FOR BEST RESULTS
GOODLUCK
Click to expand...
Click to collapse
Do you have any ideas to unlock bootloader of this phone
Thago said:
Do you have any ideas to unlock bootloader of this phone
Click to expand...
Click to collapse
I posted and tagged you in the other thread on how to unlock the phone
Do you have any idea on how to patch the boot image with magisk?
theRiyazSaifi said:
Încerc să-mi flash OPPO A5S CPH1909 pentru a downgrade ColorOS. Noul patch de securitate ColorOS mi-a eliminat ROOT și acum îmi fac probleme să-mi rootez telefonul din nou. Încerc să FLASH ROM-ul pentru a downgrade My ColorOS.
În primul rând, am descărcat versiunea inferioară ColorOS, apoi am încercat să o instalez folosind modul de recuperare, dar telefonul spune că încercați să instalați o versiune mai veche.
APOI
Am descărcat ROM(FLASH FILE) și MSM DOWNLOAD TOOL v4, dar acest instrument intermitent nu detectează niciun port - am rămas blocat aici acum
Eu folosesc :-
Windows 10 Enterprise LTSC
Placa de baza MSI Gaming Pro
Click to expand...
Click to collapse
Hi, where did you get the login and password from msm tools?
sammy_craig35 said:
I've faced a similar problem an this is how i solved it .DOWNGARDED FROM A.41 FIRMWARE TO A.34
download:
1) sp flash tool
2)oppo A5S firmware (should be software flashable not OTA ZIP)
3) oppo opf file extractor
4) oppo DAA&SLA BYPASS TOOL
5)MEDIATEK DRIVERS
6)oppo a5s da file
7)python
Battery should be sufficiently charged .
in the downloaded firmware extract the big file with the .opf extension using oppo opf extractor, make sure you select your phone type as mtk to get firmware with scatter file.
install python and run the bat file in the oppo DAA&SLA BYPASS TOOL folder this will diasble security allowing you to use custom DA.Assuming you have installed mediatek device drivers the python program will connect to your phone but you have to switch it off first.
Press both volume butttons at the same time and connect it to pc
once the program has ran succsessfully close the window. DO NOT DISSCONECT THE PHONE FROM PC
OPEN sp flashtool and the device manager loader the scatter file from the firmware you extracted and the custom da. use DOWNLOAD OPTION untick the FOLLOWING file to prevent errors while flashing "opporeserve2".
check in device manager the comport to which the phone is connected in the options tab of the sp flash tool open and click on connection adjust the comport N.O to the one of the phone
press start to begin flashing and wait for the process to finish
NB: FIRMWARE CAN BE FOUND VIA GOOLE
DAA&SLA BYPASS TOOL
-https://romprovider.com/bypass-daa-sla-protection-oppo/
oppo opf file extractor
-https://www.martview-forum.com/threads/ofp-file-extractor-without-any-device.39292/(FILE requires registration its free also turn off antivirus)
sp flashtool and da file
-https://mega.nz/file/otAiUL6I#47l3iSgfWhMv-Iq1SygVsPZhDdbRPaeMHCobCqV2gXg
tutorial for reference
A)how to flash the phone
-https://www.youtube.com/watch?v=PMZYmszOcN0
-https://www.youtube.com/watch?v=cnqDxfvEnaA
B)how to extract firmware
-https://www.youtube.com/watch?v=qoK-K4XwlVM&t=0s
DISCLAIMER:you do this at your own risk AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE.
open the above links and understand every thing and watch all videos closely FOR BEST RESULTS
GOODLUCK
Click to expand...
Click to collapse
The link that I've downloaded the rom ( oppostockrom.com) tells me to untick the preloaded.bin before flashing and then flash it without the other files , but some guys ( like you ) says not to flash opporeserve2
WHAT SHOULD I DOOOOOOO
Fredo2 said:
Hi, where did you get the login and password from msm tools?
Click to expand...
Click to collapse
Pass : te123
Disclaimer: Im new and i'm not that good at english,im not responsible for bricked devices.
So for the past month i've been through a journey of tryng to break through huawei's draconian security and i can proudly say that i finally did it, i installed a custom rom on my FIG-LX1
I've read a lot of sources and it all seems to be all over the place so i'm going to try and make this as easy as i can for you.
1.First of all ,if you want a custom rom go to OpenKirin ( https://openkirin.net/devices/) and choose your rom and see if you need to upgrade/downgrade your emui and also if your device is supported.
2.For the bootloader you have two options
a) The paid one, use sigma key or dc unlocker
b) The free and geeky one. Attention you'll need to open up your phone, which is honestly not that hard and you can pay a pro to do this for you for like 5 bucks .This method is pretty straight forward:\
1.Go to Potato NV (https://github.com/mashed-potatoes/PotatoNV) , see if your device is supported and download the software
2. Now comes the hard part, you need to take off the back cover of your device. Shut down your phone, then take your phone cover off, then you need to search google for your test point. For example for me it was Fig lx1 test point (device model+ test point)
3. When you located the test point youll need to short it with the motherboard shield. In their tutorial they said that youll need to solder it ,but it can be done easier. You need just a very small piece of wire and someone to plug the device
Here's how the process looks:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.Open potato nv software. Now you need another person to help you. Hold the phone , touch the test point and the motherboard shield and keep them shorted while the other person plugs the usb cable from pc to phone. U should hear the connection sound from windows and the CHARGING LOGO SHOULDN'T APPEAR.
5. Now you can stop shorting the test point and the shield, but keep the phone connected to PC.
6. In potato Nv choose your cpu and unlock bootloader
7.Now your bootloader is unlocked ,if any problems you still have the bootloader unlock code
Back to roms and twrp .
Now you should see this messagge appear:
This menu is very important for changing the rom ,cause every rom needs emui 9 or 8 to be installed and from here you can reinstall the stock emui after flashing custom rom but we'll talk about it later.
Now for flashing twrp.
Boot the device into bootloader mode(shut down ,then hold power+ volume down until huawei appears on screen or Better and easier and useful for later download android platform tools from SDK Platform Tools release notes | Android Developers (developer.android.com/studio/releases/platform-tools).Plug the device into pc,enable usb debugging . Open a cmd and open the folder location .Example
Code:
cd C:\Users\USerName\Desktop\platform-tools
and type
Code:
adb reboot bootloader
. You should see that your bootloader is unlocked
Download android platform tools (developer.android.com/studio/releases/platform-tools)
Now find your twrp img for your phone , rename it to recovery.img and put it in in the platform-tools folder
Now in terminal open cmd in platform tools folder and type
Code:
fastboot flash recovery_ramdisk recovery.img
Now you have twrp installed
Note that you wont use it neither for rooting with magisk neither with installing custom rom.
Installing custom rom:
Open kirin has a very good user guide and i suggest you to follow it: OpenKirin (openkirin.net/user_guide/openkirin-rom-installation-instructions/)
Btw their rom works with twrp
But it doesn't say how to switch your rom or go back to stock for switching you need to be on stock)
1.Go to Android File Host - Free file hosting for Android developers ( androidfilehost.com) and search for your build number (eg: FIG-LX1) and download a firmware emui 8 or 9.
2.Open the zip ,go to software and from here youll see a folder called dload, extract it somewhere
3.Now youll need a sdcard in your phone,plug your phone into pc and put the dload folder on your sdcard (it should bee on the root directory ,basically dont put it in another folder in sdcard)
3.You should've noticed already that every time you restart your phone there is a warning message sayng that your phone is unlocked( image above)
4.Press volume up for 3 seconds and it should take you to huawei recovery ,from here press wipe data and factory reset to kinda reinstall huawei recovery which youll use for dload
5.After wipe restart your phone ,press vol up + vol down + power until huawei logo to enter force update
6.Now wait for it to do its job and install emui.
*If it doesnt do anything , take the sd card out ,put it in another device ,open dload folder,find update.zip and put it on the sdcard instead of dload folder
7. To switch the rom repeat the steps from open kirin,note that if u had twrp youll need to install it again
Now the hardest part ,rooting...NOte that i tested root only on stock so your process can be diffrent but im not sure ,you cand try for other rom this process
For stock and no twrp:
1.Force update emui with dload method , needed for a recovery img.
2.On pc open dload folder ,open update.zip and extract UPDATE.APP
3.Now download huawei app extractor from here [TOOL] Huawei Update Extractor [UPDATED: v0.9.9.5] | OPEN-SOURCE LIBRARY | XDA Developers Forums (xda-developers.com) (forum.xda-developers.com/t/tool-huawei-update-extractor-updated-v0-9-9-5-open-source-library.2433454/)
4.Open the app and go to settings and untick every box you see
5.Now go to extract and extract the UPDATE.APP file
6.Now you should see a lot of nonsense,find recovery_ramdis.img ,left click it once, then right click for options and select extract selected
7. Now u should have a recovery_ramdis.img file.Move this file on your phone and install magisk manager.
8.Open magisk and press install in the tab with the mask(the first install button) tick the box with recovery mode, then select patch a file and select the recovery_ramdis.img file .Now it patches it. Then move the patched file to the pc again, to the platform tools folder
9.Enable usb debugging on the device and plug device to pc
10.Open cmd on pc and type
Code:
adb reboot bootloader
, or simply reboot to bootloader(shut down phone,then hold power + vol down until huawei logo appears)
11. In cmd type
Code:
fastboot flash recovery_ramdisk magisk_patched_yourfile.img
Dont forget to change the yourfile into your file name mine had something like this : jhfdU
12.Reboot your phone and voila u have root, if doesn't work go back to magisk press again install,tick recovery mode, but this time select direct install and this should resolve problems
Magisk official guide(kinda hard to understand) : Installation | Magisk (topjohnwu.github.io) (topjohnwu.github.io/Magisk/install.html#huawei)
Note that by this you'll remove your custom recovery .
IF U WANT TWRP i assume that you patch the twrp img file with magisk and flash i,t you can try it out and post your results or u can try to just flash twrp as is.
Hope i helped you !!
Since there's no Legion Y70 section, I'm posting this here in hopes of helping those who may have bricked their device (like I did).
Requirements:
1. Stock rom. I used L71091_CN_SECURE_USER_Q00041.0_S_ZUI_14.0.697_ST_221216_QPST.zip but any version will work.
2. QPST, QFIL, and Qualcomm drivers installed. I installed them from here: https://qpsttool.com/qpst-tool-v2-7-496
Steps:
1. Extract the stock rom zip to a folder with no spaces. For example I used C:\Stock\
2. Open QFIL, click on Configuration->Firehose configuration
3. Set the configuration settings as shown in attached file config.png (reset state machine should be checked, device type UFS)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Back in the main QFIL window, select:
Build type : Meta build
Programmer Path: Select the xbl_s_devprg_ns.melf file from where you extracted your stock rom .zip
Content XML: select contents.xml
Storage types: ufs (in the middle and in the bottom right corner too!)
RawProgram and Patch: Select all available files in the rom directory.
For RawProgram, there should be 9 files: rawprogram_unsparsed0, retain_userdata, unsparsed4, and rawprogram 0 to 5
For patch, there should be 6 files: patch0 to 5
5. With the phone off and unplugged, hold volume up + volume down at the same time
6. Plug the phone into a USB slot on your computer while still holding the volume up+down buttons. Wait for Qualcomm HS-USB QDLoader 9008 (COMx) to appear on top of the QFIL screen. You can now release the volume buttons.
7. Click Download Content.
Voila!
My phone was bricked/bootlooping giving me a QUALCOMM CRASHDUMP error on boot up for several days now after trying to load a custom rom and I kept getting SAHARA FAIL error in QFIL while trying to reflash stock in EDL mode. Finally the above settings worked!
sso003 said:
Since there's no Legion Y70 section, I'm posting this here in hopes of helping those who may have bricked their device (like I did).
Requirements:
1. Stock rom. I used L71091_CN_SECURE_USER_Q00041.0_S_ZUI_14.0.697_ST_221216_QPST.zip but any version will work.
2. QPST, QFIL, and Qualcomm drivers installed. I installed them from here: https://qpsttool.com/qpst-tool-v2-7-496
Steps:
1. Extract the stock rom zip to a folder with no spaces. For example I used C:\Stock\
2. Open QFIL, click on Configuration->Firehose configuration
3. Set the configuration settings as shown in attached file config.png (reset state machine should be checked, device type UFS)
View attachment 5866435
4. Back in the main QFIL window, select:
Build type : Meta build
Programmer Path: Select the xbl_s_devprg_ns.melf file from where you extracted your stock rom .zip
Content XML: select contents.xml
Storage types: ufs (in the middle and in the bottom right corner too!)
RawProgram and Patch: Select all available files in the rom directory.
For RawProgram, there should be 9 files: rawprogram_unsparsed0, retain_userdata, unsparsed4, and rawprogram 0 to 5
For patch, there should be 6 files: patch0 to 5
View attachment 5866437
5. With the phone off and unplugged, hold volume up + volume down at the same time
6. Plug the phone into a USB slot on your computer while still holding the volume up+down buttons. Wait for Qualcomm HS-USB QDLoader 9008 (COMx) to appear on top of the QFIL screen. You can now release the volume buttons.
7. Click Download Content.
Voila!
My phone was bricked/bootlooping giving me a QUALCOMM CRASHDUMP error on boot up for several days now after trying to load a custom rom and I kept getting SAHARA FAIL error in QFIL while trying to reflash stock in EDL mode. Finally the above settings worked!
Click to expand...
Click to collapse
(Solved)i keep getting SAHARA FAil error too in QFIL.. Can u tell me how did you solve this problem? and where did you find stock rom? i have only zui14 220914 rom and this rom has a SAHARA error
—— i chose the wrong stock rom. It is not working on QFIL
.
.
.
wjswnsgk0204 said:
(Solved)i keep getting SAHARA FAil error too in QFIL.. Can u tell me how did you solve this problem? and where did you find stock rom? i have only zui14 220914 rom and this rom has a SAHARA error
—— i chose the wrong stock rom. It is not working on QFIL
Click to expand...
Click to collapse
Hello, maybe it's late but for those who need it, I had the same problem as you, that always came up until I came across some advice on why it usually happens, in my case it was that the connection was made before time, We must configure everything long before placing and connecting the mobile in EDL mode, be careful it must be a 100% original USB cable of any brand for the data transmission to be successful... I hope it works for you...
credits: https://www.getdroidtips.com/sahara-fail-error-in-qfil/
where can we find the stock rom
kalid191 said:
donde podemos encontrar la stock rom
Click to expand...
Click to collapse
Hello, this link is https://drive.google.com/file/d/1bRKqkWb7RDcrnXZEnS701T87nfgHxUrk/view?usp=share_link
GustavoRj98 said:
Hello, this link is https://drive.google.com/file/d/1bRKqkWb7RDcrnXZEnS701T87nfgHxUrk/view?usp=share_link
Click to expand...
Click to collapse
thank you so much,
another file i want to ask for is vbmeta.img do you know where can i find it
kalid191 said:
thank you so much,
another file i want to ask for is vbmeta.img do you know where can i find it
Click to expand...
Click to collapse
Here we go
(Credits for the people on 4pda)
This is super helpful! I've linked your guide in my discord server (for Y70 owners) if you don't mind. If anyone is interested in joining, here is the invite: https://discord.gg/r5VMszTGVr
Please feel free to share the link around or invite others. There are help and support channels, and a resources one too. I'm hoping we can attract more people there and have more things shared amongst each other.
jimbi87 said:
Here we go
(Credits for the people on 4pda)
Click to expand...
Click to collapse
What is this??
A alguno le funciona las aplicaciones de streaming como Netflix, HBO, Crunchyroll, etc después de flashear???
Where can I find stock ROM for Legion Y70?
Something is wrong with the display. There is a bar in the middle of the screen that is displayed in a different shade. I have a factory protective film on my screen.
hello , why Programmer Path not work for me , cant click ?
G14R said:
A alguno le funciona las aplicaciones de streaming como Netflix, HBO, Crunchyroll, etc después de flashear???
Click to expand...
Click to collapse
I have the same doubt. You managed to find out.
Discord users have stated that it works using Magisk