Related
Hi, everyone I just joined this forum. I have X10i with firmware 2.1. While searching the thread i came acrosss terms like root, xrecovery, flashing, MT, generic etc. Can someone help me out what these terms mean. I wanted to upgrade my phone to gingerbread. Previously I am an iphone user So i am total noob to this OS and the phone
Thanks in advance
good get away from iphone
root--same thing as jailbreak
xrecovery-- a badass tool that lets you flash roms onto your phone.
flashing-- umm... it is like installing a modified version of even the legit version on the device
generic-- A product having no brand name or registered trademark
example= for device there is branded or non branded
branded means that a company like ATT or Rogers approves that firmware or OS version. So when you turn your phone on, you will usually see something related to them. like an animation of the att world
generic--- clean install. no company restrictions. just regular
ok links for all that crap above
2.3.3 firmware (does not matter if you download x10a or x10i)
Generic-----
http://forum.xda-developers.com/showthread.php?t=936733
do yourself a favor and read
http://forum.xda-developers.com/showthread.php?t=936733 before and download the program WINDOWS only
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
angel eyes said:
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
Click to expand...
Click to collapse
Either will do.
ok thanks for the advice going for the upgrade now lets hope everything goes smoothly will post the results
Now this is the end result of upgrading my phone I used SEUS to upgrade my X10i the phone went into flash mode and the SEUS detect that new software is available soit downloads it but when it comes to installing it stopped at about 15% and said that updATE cannot continue check battary is fully charged and than again try. As far is i remember phone was fully charged when i put it for update now what should i do. The phone doesnt restarts now and when I power up my phone only th egreen led blinks and it vibrates for split second than nothing I waited for it but the phone is not responding what should i do now
HELP NEEDED
to tell you the truth i dont know what SEUS is
i think it is for drivers or something but you should use PC comapanion for drivers
ok
use flashtool in the first link i gave you and download one of the 2.3.3 files
or use a 2.3.3 rom
and flash the sucker on
it should work
Try flashtool if doesn't work let your phone on charge for 1 hour and take it off try again whit seus should be good to go
Sent from my X10i using xda premium
Thanks for the help guys now i have downlaoded flashtool 0.2.8, 2.9,3.0 i also downloaded the firmware and did all the steps according to the toturiol but that what happens it detect the phone in flash mode the flashing starts but at fato1.sin it gives as error message "error flashing abort". I also tried other firmwares but the same error.
Now guys I think I am great trouble so need help
What to do next
And I used the desktop charger to charge the battery for whole two houra but SEUS gives the same error plus pc companion gives error as well i am stuck
Go to pc application manager, close seus and pc companion. Try flashtool tool once again http://forum.xda-developers.com/showthread.php?t=928343. I hope this work for you.
Sent from my SO-01C using Tapatalk
Ok i will try that one too thanks alot lets see wat happens
ok tried that too nu luck
What should i Do now One thing more i was goignaround the threads looking for solution So in one thread it said that firmware can ber installed through flash tool 0.2.5
I tried that too and amazingly the flashing goes all the way to the end on 0.2.5 in the end i get the msg that flashing complete and remove the phone but when i remove the phone and turn it on it just vibrates and small blip of green flash led than nothing
What could be the problem
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Thanks for advice downloading it now and going to try and will let now about the results
sasukewa said:
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Click to expand...
Click to collapse
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Do you have the new flash tool?
angel eyes said:
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Click to expand...
Click to collapse
Can u do a screen shot or tell us what the error message is?
Thx.
Dark Nightmare said:
Do you have the new flash tool?
Click to expand...
Click to collapse
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
When you reboot is there anything showing on the screen? Sony logo...anything? If yes, wait it can take a long time for a new rom to install. If no, I think you need to revert back to the 2.1 rom, root and install busybox, superuser, and xrecovery. once thats done you can backup your rom and data so you don't get stuck updating or if you have trouble with a custom rom etc. Also I think your battery stats should be wiped using xrecovery, it sounds like SEUS checked this and the file said your battery was too low to continue the update. Here is a good place to start.
http://forum.xda-developers.com/showthread.php?t=928343&highlight=flashtool+for+noobs
Here is a video on youtube that may help too:http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps you, Good Luck.
angel eyes said:
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
Click to expand...
Click to collapse
Try taking the battery out and then try flashing again. Which ftf file are you flashing or selecting in the flash program. You need to use at least a 0.2.9 version of the flashtool.... if you use 0.2.5 start with the 2.1.54 ROM first.
Gentlemen, I couldn't find a section for Xperia Pro, please excuse me if this is misplaced.
I rooted my MK16i from ICS 4.0. according to a guide here on XDA forum, with no problems (from 4.1.a.435 .. i think).*
Then I installed system tuner and backed up the bloatware and what I believed was obviously named as packages that support them. Things were working great and the phone gained some performance improvements.
UNTIL, I installed Viber and Skype, and niether were working. I thought I would fix it by restoring all the backed up services and apps. Once I did that and rebooted the phone, it became useless
THe phone keeps rebooting. I get to the XPERIA loading screen and then it restarts again
I tried to connect it to the PC to flash another ROM with the Flashtool, but it is not recognized. All I get is in the computer screen a removable disk drive, that is not accessible.
Note: I didnt update the firmware after I rooted.
Can anybody help?
have you worked with flashtool before ? because there hardly could be any wrong with flashtool. use the latest version with proper drivers.
and since you have rooted phone, have you unlocked your bootloader ? if yes, then flash any custom kernel, go to CWM, then place rom zip on sdcard and stright flash rom via CWM.
flashtool should work though. you can try on different computer.
If flashing a kernel or installing custom ROM sounds a bit out-of-reach, you can always go for the repair option in PC Companion. It worked for me when I had soft-bricked my Neo V (it wouldn't go past the SONY logo). However, be advised that this repair option will erase your phone's internal memory. Also, your phone will be brought on the latest stock ROM, so you will need to root your phone again.
Good Luck!!! :good:
acemccloud1 said:
If flashing a kernel or installing custom ROM sounds a bit out-of-reach, you can always go for the repair option in PC Companion. It worked for me when I had soft-bricked my Neo V (it wouldn't go past the SONY logo). However, be advised that this repair option will erase your phone's internal memory. Good Luck!!! :good:
Click to expand...
Click to collapse
I tried to do somethingn like this but sony companion itself cannot detect the phone either.
My question is, is there a brick that cannot be fixed? I took it to a shop today and still they cannot fix it.
Have you tried to use sony update service?
How are you connecting your phone to flashtool?
Can you show us log from flashtool?
New development:
Now I tried to flash the phone with flashtool 32bit rather than 64-bit and it detected the phone! I could even flash the only firmware in Aeonworld's post Here.
Now I can see the phone connected in my computer.
However, the phone still won't boot but when I power on it gives black screen and after a short while, the led on the side becomes green.
For some reason though, I cannot continue with the rooting steps in his guide.
So anyways, after the second reboot, not the first for some reason, the phone gets detected in PC Companion, and I installed the update and now it is working again :victory:
Thank you all for your support.
moeness86 said:
New development:
Now I tried to flash the phone with flashtool 32bit rather than 64-bit and it detected the phone! I could even flash the only firmware in Aeonworld's post Here.
Now I can see the phone connected in my computer.
However, the phone still won't boot but when I power on it gives black screen and after a short while, the led on the side becomes green.
For some reason though, I cannot continue with the rooting steps in his guide.
So anyways, after the second reboot, not the first for some reason, the phone gets detected in PC Companion, and I installed the update and now it is working again :victory:
Thank you all for your support.
Click to expand...
Click to collapse
Good to hear that bro!!! R&D always makes a man better
Okay, so I waited patiently for Lollipop to drop on the Z Ultra C6833 in Singapore -- but apparently this is almost the only country which will not be getting the OTA (I can't even get them to answer on Twitter or FB whether this is true). So, I finally followed Sony's instructions to unlock the bootloader. That succeeded. But then I was presented with a language-selection screen after the subsequent boot which I wasn't expecting, and since I thought I just wanted to just go down into recovery and not set up a refresh ROM, I powered off the device without proceeding through the language selection screen.
Apparently, that was a bad call because I've been in a bootloop since then which triggers after a freeze in the swishy boot animation. I flashed the TWRP recovery image I found on these forums, but no go. The volume up/down tricks have never put me into a recovery environment, and the only thing I can succeed in doing still is putting it into fastboot. Sony PC Companion's recovery process won't complete because it detects foreign software (probably the TWRP recovery, right? -- but where do I get stock recovery, and would that even work anyway? And Emma let me in once, but subsequently refuses to respond to the supplied configuration INI file (I'll try to fully reinstall this thing later).
I love this phone. Best phone I've ever had. My plan is up and I *could* get a new phone, but I don't want to move on! I want my Z Ultra. So, someone hold my hand, please. I am even willing to pay a bounty (via PayPal) for a live chat if that is what it takes to get someone knowledgeable to help me in a timely fashion. I live in Singapore (UTC+8), and I do biphasic sleeping, so I'll also be awake between 1:30am and 4:00am my time. Thanks in advance for **any kind of help!**
Sincerely,
Hopeful and anxious expat in Singapore
Edit: I will pay $60 USD by PayPal to the individual who can provide a productive resolution (preferably write here and be available over chat so I can learn from you -- PM me for Hangouts, Skype, VSee, or Firefox Hello contact details). A "productive resolution" does not mean necessarily that we will fix my phone. It may mean that we conclude definitively that we can't. I will take this thing into the Sony Service Centre and give them my money if I have to, but I'd rather give it to one of you fine folks. I only want to give a few more hours to this. I've already been phoneless for two days.
New information in the continuing saga
Reinstalling Emma didn't help, nor did putting customization.ini in creative locations or pasting the developer mode line from that INI file into other INI files within the Emma directories. So I gave up on Emma until I can get to another computer.
After a user kindly uploaded this SIN file (http://forum.xda-developers.com/xperia-z-ultra/general/bootloader-devices-real-recovery-t3117566) to a fileshare for me, I figured out (here https://android.stackexchange.com/questions/65058/why-custom-roms-are-zip-filed-than-made-as-ftf) that "FlashTool" is not the same as Sony's "flashtool" Emma, so I installed it. It wanted me to put the phone in flashmode -- so I held volume down while plugging in the cable, which never before displayed anything different on the screen, nor a green LED which I've read elsewhere I should be seeing (e.g. http://www.theandroidsoul.com/sony-xperia-z-ultra-flash-mode-51769/). But despite the lack of visual clues, FlashTool told me it connected to flashmode and the flash succeeded. It didn't seem to help at all, though, as I still get the bootloop just as before and I still can't access a recovery mode.
That means that I can apparently get into both fastboot and flashmode, which I wanted to make special note of. Is it possible to access ADB while the phone is powered off?
just download flashtool, install driver in included in flashtool folder.
download also any FTF, generic zultra, dont care if 3g or lte.
flash it, should resolve the issue.
in flashtool, make sure you dont touch and leave the flash option as default. it will wipe your data, cache and everything.
to be safe, remove sim and sdcard.
More information...
curiouso9 said:
just download flashtool, install driver in included in flashtool folder.
download also any FTF, generic zultra, dont care if 3g or lte.
flash it, should resolve the issue.
in flashtool, make sure you dont touch and leave the flash option as default. it will wipe your data, cache and everything.
to be safe, remove sim and sdcard.
Click to expand...
Click to collapse
None of the supplied drivers match the "S1Boot Fastboot" device which comes up in my Device Manager. Also, none of the updated FlashTool Xperia Driver Pack match (http://forum.xda-developers.com/showthread.php?t=2635830), nor the drivers on SonyMobile.com, nor the drivers which come with Sony PC Companion. I didn't have this problem on my other Windows 10 machine, but just in case that is an issue, I'm downloading the Android SDK 1.2.1.1 Beta to see if I get any mileage out of that.
I attempted to flash the FTF supplied here (http://forum.xda-developers.com/showpost.php?p=60958777&postcount=3) but I got the following messages:
INFO - Opening device for R/W
INFO - Start Flashing
INFO - Checking header
ERROR - Processing of loader.sin finished with errors.
INFO - Ending flash session
ERROR -
ERROR - Error flashing. Aborted
INFO - Device connected in flash mode
Click to expand...
Click to collapse
Then I used XperiFirm to download my original .108 firmware and attempted to flash it but got the same errors as above.
Download flashtool
I assume you're on windows 8.1/8 you have to disable driver signature enforcement. Then install the drivers than flashtool will detect your phone.
Flash ftf
You will need to re-root, and you can unlock the bootloader.. After that flash away. Remember to install recovery and back up ta. I'm a noob at this and did it for the first time a few weeks ago, so I know you can do it.
Rockin' and rollin'
RealityFails said:
I assume you're on windows 8.1/8 you have to disable driver signature enforcement. Then install the drivers than flashtool will detect your phone.
Click to expand...
Click to collapse
I'm on Windows 10 -- I wasn't getting any errors, so DSE didn't even occur to me. I disabled it and was able to re-flash stock. Still, I struggled with getting a recovery installed, but after several attempts, and started from scratch a few times, one of them finally stuck. After that, I installed a custom ROM and things are running perfectly.
Thanks!
David
mypetocean said:
I'm on Windows 10 -- I wasn't getting any errors, so DSE didn't even occur to me. I disabled it and was able to re-flash stock. Still, I struggled with getting a recovery installed, but after several attempts, and started from scratch a few times, one of them finally stuck. After that, I installed a custom ROM and things are running perfectly.
Thanks!
David
Click to expand...
Click to collapse
Download rashr and it will have recoveries for you
Disappointment with the Service Center
By the way, when I decided I had been too long without an operating phone (before I got the DSE tip), I took the phone to a Sony Mobile Service Center and had them diagnose it. They concluded that there was a hardware failure rather than a software failure (which would require some 300 SGD to repair). I declined, returned to the office, saw the message about DSE, and was immediately successful in reflashing stock. I took it back to the Sony Mobile Service Center and had them confirm that there was in fact no hardware issue -- and that their diagnosis was incorrect. Thanks for the help folks!
So, I tried using flashtool for the first time today with my xperia z3v (verizon version). I wanted to update it to the fairly recently leaked lollipop rom (verizon is still on kitkat).
Anyways, I think what happened is that I forgot to turn on usb debugging before flashing the FTF. And now my phone is stuck saying: "the software update failed. Make sure that your phone is connected to the computer and try again."
I've tried reflashing multiple times to no avail. I've tried factory resetting by holding the volume down and power button but that won't work. And Sony PC companion won't pick up the device at all either. Can anyone help me get my phone working again? Maybe I should try flashing a different version? I've been googling for the last 4 hours trying to solve this so any input would be greatly appreciated!!
**EDIT: Nevermind I figured it out here is what I did when I had trouble with flashtool:
Quote:
Originally Posted by fixmewireless
I tired update Z3v with Flashtool to latest version and phone got soft bricked. I downloaded ftr file from server and flashed with flashtool. flashing process went thru, but phone shows message "software update failed".
Only error message I had during flash is ERROR - Error parsing TA file. Skipping
I noticed that flashtool does not have fsc preinstalled for D6708 (z3v). Did that cause the problem?
Can anybody upload fsc for z3v?
thanks
I actually ran into this same exact problem. After I had it soft bricked as you stated, I opened back up flash tool and when to set up the flash, and inside the flashtool I checked every box under Wipe, Also check all boxes under Exclude, EXCEPT SYSTEM. Leave SYSTEM un checked! Check everything under MiscTA Exclude too. I Then ran Flash and let it do its thing until it prompt me to plug in device into flashmode. It the ran the flash successfully and rebooted my device. I then followed the rest of the steps from page one and was able to root the device with no problems. Hope this helps!
If you hold volume down, and plug the usb into the pc, does the updating message appear?
zackdadams said:
If you hold volume down, and plug the usb into the pc, does the updating message appear?
Click to expand...
Click to collapse
Yes it does. So I am able to attempt re-flashing it at least but so far haven't gotten anywhere. Why?
actionjaxon77 said:
Yes it does. So I am able to attempt re-flashing it at least but so far haven't gotten anywhere. Why?
Click to expand...
Click to collapse
It's cusrious you are geting the error parsing TA file. You have a verizon phone so you must be bootloader locked. Were you roted before? Maybe just corrupt FTF file, try downloading it again or try to convert the SIN files to ext4 within flashtool and see if you can read everything correctly with ext4explore.
Sounds to me you soft bricked the phone, which is what I and others also experienced when attempting to flash.
I simply started up flashtool again, loaded the leaked lollipop ftf, and when asked, get back to the "updating" screen on the phone.
The phone should flash correctly.
Like mentioned above, try downloading the ftf again, or download the stock/shipped ftf.
http://forum.xda-developers.com/z3/xperia-z3v-general/guide-sony-xperia-z3v-t3100402
He mentions "1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download..."
That's the shipped version ftf.
The leaked Lollipop ftf link was down, so I used this one:
http://www.androidvillaz.com/2015/09/verizon-sony-xperia-z3v-d6708-android.html
zackdadams said:
Sounds to me you soft bricked the phone, which is what I and others also experienced when attempting to flash.
I simply started up flashtool again, loaded the leaked lollipop ftf, and when asked, get back to the "updating" screen on the phone.
The phone should flash correctly.
Like mentioned above, try downloading the ftf again, or download the stock/shipped ftf.
http://forum.xda-developers.com/z3/xperia-z3v-general/guide-sony-xperia-z3v-t3100402
He mentions "1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download..."
That's the shipped version ftf.
The leaked Lollipop ftf link was down, so I used this one:
http://www.androidvillaz.com/2015/09/verizon-sony-xperia-z3v-d6708-android.html
Click to expand...
Click to collapse
Thanks for the help, I was able to successfully flash it using the info I pasted in my edit to the original post!
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
I am curious could i perhaps flash the csc for tmobile then maybe my dev settings let me unlock bootloader like tmobile variant? I am not certain but I feel like it could possibly
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
two559 said:
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
Click to expand...
Click to collapse
Ya I am working on a few things but, honestly its going to be tough if I do happen to figure out a way for custom recovery xda forums will know first.
Helllo
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
edyrod84 said:
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
Click to expand...
Click to collapse
If I doesn't turn on at all. Then it's bricked. To make sure. Switch the battery or charge it. If it still doesn't turn on there is nothing you can do. But if you can get into Odin and download mode. There is hope and I have the files you'll need to salvage it.
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
EvilDoer360 said:
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
Click to expand...
Click to collapse
I rooted mine a while back, do you still need assistance?
i need some help, is there any custom recovery i can install for this phone?, cause i wanted to install the rom in this thread with flashify but i can't do it: http://forum.xda-developers.com/gran...285mb-t3415560
Layman instructions?
I just want to root my phone so that I can save whole apps on my sd card to free up so much space.
I'm just a layman though and have no idea what's being talked about or what the files are that you're sharing. I would really appreciate step by step layman instruction. Thank you so much if you can do that!
toxinburn said:
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
Click to expand...
Click to collapse
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
toxinburn said:
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
Click to expand...
Click to collapse
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
ya i think you messed up royally, their is no working philz or cwm for the 530AZ at all because the bootloader is locked soooo i dont see how you ever flashed it with that in the first place, but if you indeed were able to then it looks like you have a soft brick of sorts since the bootloader is locked on that model, their is firmware but you for some reason are unable to flash with odin so sadly I am not sure what else you could do other than maybe see if it is recognized on other usb ports or computer also check your device manager in windows and check and see if the usb device is listed if it shows a yellow exclamation or unknown device then manually update the driver for the unknown device as an android device
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
Since Odin won't recognize it
Give this a shot
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
[Edit]didn't realize that comment was so old xD [/Edit]
Help!!
Autolounge said:
I rooted mine a while back, do you still need assistance?
Click to expand...
Click to collapse
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
benash2010 said:
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
Click to expand...
Click to collapse
That is the exact model I have so this should work! Use KingRoot but the desktop variant. And if that doesn't work use KingRoot, again the desktop variant. Let me know how it goes!
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command.
Let me know
apk
Sorry for the file "CROM_Service.apk" for what?
Hey I need that!
Kangrito said:
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command./
Let me know
Click to expand...
Click to collapse
HEY I REALLY NEED THAT!
I don't have the actual CWM on my phone yet. I just got it today. I already have it rooted, deodexed, and debloated(somewhat).
I was able to root it using kingroot. I'm still working for a way to replace the newest kingroot(5.1.0) with SuperSU.
But my question is does it actually work? Have you flashed the tar with odin and fix the code in it with commands.
Just reading your post gives me chills honestly. I like doing things as soon as I can! I'm a phoneaholic.