How to Flash ColorOS on OnePlus 9R
Warrning!: flash at your own risk, Im not responsible for any hardware damages.
This method is for testing purposes, don't expect everything to work
Prerequisites:
OnePlus 9R (Tried on CN Unit LE2100 DDR5)
OOS 12 on both slots a/b
Unlocked bootloader
ColorOS Build from OnePlus 8T
Payload Dumber
Attached Flash_All.bat script (Big Thanks to @HELLBOY017 for it)
a brain to follow everything properly
1. If you're already running OOS 12, and updated with OTA more than once, you can skip a/b on both slots
2. If still running OOS 11, then Flash OOS 12 .21 then update to .33 so you have OOS 12 on both slots
OOS 12 .21 Here, OOS 12 .33 Here (Use attached OPLocalUpdate to flash .33)
3. Unlock bootloader and let system boot up and finish setup
4. Download ColorOS 12 for OnePlus 8T
OnePlus 8T ColorOS 12.1 C.29
Link 1, Link 2, Link 3, Link 4 (Download from one of them)
5. Dump payload.bin from ColorOS Zip with payload-dumper-go
Drag and Drop Zip into payload-dumper-go.exe and let it finish, ROM will be inside extracted_* folder
6. Copy Attached flash-all-COS-9R inside extracted_* folder
7. Reboot your 9R into bootloader
8. Run flash-all-COS-9R .bat and let it finish
9. Let device reboot when everything is finished and wait for system to boot, if device didn't boot reboot into recovery and wipe data
Final note: This guide is for advanced users, I won't spoon feed you every detail or remote into your PC to do everything
Also dont use any other tool to flash payload like fastboot enhance, it will brick your device
For Gapps, just install PlayStore and Login, you can find it Here
Screenshots attached bellow
OnePlus 8T Builds:
ColorOS 12.1 C.29
Link 1, Link 2, Link 3, Link 4
ColorOS 12 .34 Here
ColorOS 13.0.0 F.06 Here
Great. Would love to try this on my 9R
OMG that's crazy! Thank you for your work, and I also want to know when I finish installing cos, can my 9r ota or local install normally like 8t?
sdustcc said:
OMG that's crazy! Thank you for your work, and I also want to know when I finish installing cos, can my 9r ota or local install normally like 8t?
Click to expand...
Click to collapse
You shouldn't do OTA's, you have to keep downloading full firmware zips and flash them with the same method above to avoid any possible bricks!
ColorOS 12 .34 is out for 8T Here
AL_IRAQI said:
You shouldn't do OTA's, you have to keep downloading full firmware zips and flash them with the same method above to avoid any possible bricks!
Click to expand...
Click to collapse
Got it! Thx!
Tried installing, Now my OnePlus 9R stuck in bootloader.
Not Booting to OS.
Any suggestions please??
Device Details:
OnePlus 9R India Variant DDR5 RAM
Was earlier OOS 12.1
aveejnasv said:
Tried installing, Now my OnePlus 9R stuck in bootloader.
Not Booting to OS.
Any suggestions please??
Device Details:
OnePlus 9R India Variant DDR5 RAM
Was earlier OOS 12.1
Click to expand...
Click to collapse
Here is my flash log
cmd_log.txt
drive.google.com
aveejnasv said:
Tried installing, Now my OnePlus 9R stuck in bootloader.
Not Booting to OS.
Any suggestions please??
Device Details:
OnePlus 9R India Variant DDR5 RAM
Was earlier OOS 12.1
Click to expand...
Click to collapse
Did you wipe data from recovery after flashing ?
AL_IRAQI said:
Did you wipe data from recovery after flashing ?
Click to expand...
Click to collapse
Yes I did
Booted Successfully 8T F.03 but no network
Both Imie Number showing and also Sim Deducted as Vodafone In But no Signal Available Any Solution
how to fix sensor problems ? coloros 13
ypdeveloper said:
Booted Successfully 8T F.03 but no network
Both Imie Number showing and also Sim Deducted as Vodafone In But no Signal Available Any Solution
Click to expand...
Click to collapse
Got any solution?
installed but no network
on airtel sim
Sheikh Nadeem said:
Got any solution?
Click to expand...
Click to collapse
same problem
Kazuyasenpai said:
same problem
Click to expand...
Click to collapse
I switched back to oos 12
how to fix sim issue
Here Is network solution for LE2101 Indian Model
I personally tested it on Le2101 with Vi Operator also Volte is working
Steps:
1.----> After Color OS Booted restart your device into fast boot again
2.-----> Than flash below attach modem file (Extracted from c.35 Oxygen OS 12.1 Indian Variant) Using Bellow Command
fastboot flash --slot=all mdm_oem_stanvbk mdm_oem_stanvbk.img
3.------> Than reboot your device and enjoy network services
Warning: - I am not responsible if anything goes wrong, I tested it on my device, and it works
Related
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
The goal of this ROM is to experience ColorOS 6.0 on any non-oppo and non-realme phone.
For a list of treble supported devices, consult and fill https://github.com/phhusson/treble_experimentations/wiki
How to flash:
1- Flash a treble pie rom (CAF vendor recommended.)
2- Extract 7z file and flash system.img
3- If base rom isn't permissive flash permissiver.
4- Reboot
Bugs:
- Fingerprint
- Since it's oem port maybe more on your device. But common bug is Fingerprint.
Download:
system.img for A-A/B ARM64 devices
Telegram Account: MacTavishAO In case of any problem please send me logs.
Thanks to: @erfanoabdi for everything..
Reserved. You can follow me on github.
Changelog:
1.0: Initial release.
Does it include stock sounds and ringtones? Thanks
ZoiraP said:
Does it include stock sounds and ringtones? Thanks
Click to expand...
Click to collapse
yes
Nice work.
Keep it up.
After reebot after flashing system, back to recovery. Any solution? Device Nubia Z17 (NX563J)
surfer30 said:
After reebot after flashing system, back to recovery. Any solution? Device Nubia Z17 (NX563J)
Click to expand...
Click to collapse
You need pie treble vendor, permissiver.
I flashed over Lineage 16GSI (android 9). But not flashed permissiver - you sugested tryed once more?
Kanka Lenovo Z5 direk crash diag bölümüne atıyor dediklerini harfiyen yaptığım halde.
Lenovo Z5(L78011) didnt work.
Stuck on boot logo. My Vendor is CAF and flashed permissiver V2
Couldn't flash in nokia 6.1 plus
Image file size larger than target device eror in twrp ..
Plz solve my problem..:crying:
Either bootloops or doesn't get past the boot image on Note9 N960F no matter what. (Different kernels, flash on different systems etc.)
rahul387 said:
Image file size larger than target device eror in twrp ..
Plz solve my problem..:crying:
Click to expand...
Click to collapse
That isnt how it works
Some random said:
That isnt how it works
Click to expand...
Click to collapse
When i flash color os in my nokia 6.1 plus .. its showing me that the image file is bigger than target device!!
Any solution for me ..?
I have 2 questions :
1) Can I flash this ROM on Mi Max 2 with Orange Fox 10 recovery?
2) Can this be used for daily life usage?
Thank you
No boot
System partition smaller than image
rahul387 said:
When i flash color os in my nokia 6.1 plus .. its showing me that the image file is bigger than target device!!
Any solution for me ..?
Click to expand...
Click to collapse
I read that we have to resize the system partition when that error occurs. It's too advanced for me so I left it.
Kicked into fastboot
I've tried installing it exactly as described here and also how it's described for other pie GSIs for oneplus5t but I only get kicked into the fastboot mode. I really like to try out this rom on an amoled display. Any specific methods I should follow? (I used mokee phh treble vendor as that was recommended in most forums, am also decrypted..maybe i have to try by flashing noverity too) all gsi tutorials and pages for oneplus 5t are about a year old so i'm not sure I can follow that and succeed. Any help would be appreciated. Thanks.
I cant install in redmi 6a
Galaxy A3 2017? (a3y17lte)
I have discovered a thread of the project treble port, how to fix stuck on boot screen?
1. please read this very carefuly.this guide is made from my personal experience.
like some members of this forums told me and i think a little about it,there can be problem about downgrade to oreo with devices who have unlock device from operator.but i believe can be easily unlock with talk with operators,not sure,but be best to check it out by self.
firstly i am not noob,i am developer and compiler for many mtk device. sadly this is my FIRST
samsung device also snapdragon. so for me completely unknown.i want in first root and do custom roms but untill now
i dont find any device tree for this device.kernel source i have but device and vendor tree not.then i found i can
flash gsi on this device. so i do as i will explain in following text.
2. as many other of you i have update device on PIE and next days i install update i found possibility to flash gsi,
so i try. i found patched pie boot.img and try to flash gsi roms but none of them isnt boot.so i stop and again read gsi guide
for flash gsi.i read that devices shipped with some firmwares have chance to flash gsi roms.so i found oreo rom
for our device and flash it with odin.rom is boot without any problems.i set up all things as normall(google account)
and after all setup i go to device info and tap on build numbers 7-10 times and then developer settings is open,then i
checked if is there oem unlocking.(if you dont set up google account this settings will not shown(oem unlocking)).
when i see is ok and there,i power off device,go to download mode and connect with pc,and open odin,
and flash twrp(again thanks to ashyx).dont let odin to boot system(turn off auto rebbot in option),
so i reboot to recovery,go to wipe,choose format data,write yes and swipe.
after that i reboot to recovery you MUST flash oreo enforcing.zip,rmm and oreo patched boot.and go to install choose micro sd card and go to flash img. choose gsi rom you want and
flash it as system(pop up windows will ask wich partition you choose(system),then swipe to flash,after flashing you flash magisk,
and go to mount and mount system and reboot to system. firstly your device can reboot once-twice during,but dont worry
after that will go to boot and in short time,one- two minutes will boot.
3.now i must warning you.many of gsi roms work properly,but have many bugs.mtp dont works with pc in boot up,but in recovery
works without problems.for me is not problem,i can live with it.
3.1.sim card 2 is work but sim card 1 is not see it.also i can live with it.most of time i use 1 sim card,not both.
3.2.fm radio isnt show,and not work.
4.in short i give you again flash guide.
go to recovery (must be in oreo)
go to wipe-format data,write yes and swipe to format (many say to need back to recovery,i didnt do that but is your choice).
go to sd card and install oreo enforcing.zip,RMM bypass.zip and oreo patched boot.img
go to install and choose flash.img and choose gsi you want,and flash as system
go to install zip and flash magisk
then go to mount,mount system and reboot to system
device will reboot twice or more time and then after minute or two will reboot.be calm.
after device is reboot,enjoy.:good:
i will post some screenshots of booted gsi roms.oreo and pie.
list of booted gsi rom so far:
1. aex 5.7 oreo
2. aex 6.5 pie
3. aosdp pie(this rom not show network and sim cards)
4. aosp by phusson pie
5. bootlegger oreo
6. descendant 3.0 pie
7. dot os pie(dont show network and simcards)
8. havoc os pie
9. lineage 16 pie
10. RR oreo
11. RR pie
12. system DU oreo
13. xenon hd oreo
GSI with errors:
AOSDP (not shown sim cards,no network,all other stuff work,off course no fm radio)
Evolution X (dont want to boot.)
Octopus OS (dont boot)
Viper OS Official (not shown sim cards,all other stuff work except fm radio)
Dot OS (dont show sim cards,no network,no fm radio)
Liquid Remix (dont boot)
Omni rom (boot but goes constantly on reboot)
Pixel Expirience (boot but no sim cards and no network and no fm radio)
people one more notice: j4+ is ARM A ONLY device,dont flash any other gsi.
deleted
What version of RR Pie did you test? The May Release?
JDBS30 said:
What version of RR Pie did you test? The May Release?
Click to expand...
Click to collapse
all of them.
this link i used and choose one of them from your choice arm a only of course: https://get.resurrectionremix.com/?dir=gsi
I can't install Resurrection Remix
I face so much problems while installing custom roms, I tried Android Pie GSI, Pixel Experience, Resurrection Remix. But All of them crashes at boot animation. What can I do? I can't find any thread about that.
My phone is Samsung Galaxy J4+ (arm aonly).
Please help me?
elfennani said:
I face so much problems while installing custom roms, I tried Android Pie GSI, Pixel Experience, Resurrection Remix. But All of them crashes at boot animation. What can I do? I can't find any thread about that.
My phone is Samsung Galaxy J4+ (arm aonly).
Please help me?
Click to expand...
Click to collapse
my dear friend did you read my guide?. i explain wich gsi roms can flash and how.please read from start to end.it is very clear.
rudi021 said:
my dear friend did you read my guide?. i explain wich gsi roms can flash and how.please read from start to end.it is very clear.
Click to expand...
Click to collapse
Yes, I read everything, I tried Pixel Experience and Android Pie GSI before seeing this thread. So I decided to try Resurrection Remix, But it crashes while boot animation then after the phone gets restarted (bootloop)
elfennani said:
Yes, I read everything, I tried Pixel Experience and Android Pie GSI before seeing this thread. So I decided to try Resurrection Remix, But it crashes while boot animation then after the phone gets restarted (bootloop)
Click to expand...
Click to collapse
like i wrote your device must be on oreo,not on pie.thats my expirience.when i was on pie i cant boot any pie rom.after i flash oreo stock rom and flash twrp i flash and boot almost any gsi wich is aviable.you must be on oreo stock rom and then flash twrp,then flash oreo enforcing,rmm,then format data(write yes and swipe to format),then flash gsi as system,flash magisk,then go to mount and check system then reboot.thats it. maybe is my mistake i didnt write that you must do flash those thing before,but i supose people is knowing what must to do when do flash twrp. sorry.
rudi021 said:
like i wrote you must be on oreo,not on pie.thats my expirience.when i was on pie i cant boot any pie rom.after i flash oreo stock rom and flash twrp i flash and boot almost any gsi wich is aviable.you must be on oreo stock rom and then flash twrp,then flash oreo enforcing,rmm,then format data(write yes and swipe to format),then flash gsi as system,flash magisk,then go to mount and check system then reboot.thats it. maybe is my mistake i didnt write that you must do flash those thing before,but i supose people is knowing what must to do when do flash twrp. sorry.
Click to expand...
Click to collapse
How did you downgrade your firmware?
elfennani said:
How did you downgrade your firmware?
Click to expand...
Click to collapse
i found oreo firmware. if you want you can download from my google drive. here is link: https://drive.google.com/file/d/1KnqHZ8_EVTstJP5AMsMy_8Uc1QV-vMHe/view?usp=sharing
Please help
rudi021 said:
1. please read this very carefuly.this guide is made from my personal experience.
like some members of this forums told me and i think a little about it,there can be problem about downgrade to oreo with devices who have unlock device from operator.but i believe can be easily unlock with talk with operators,not sure,but be best to check it out by self.
firstly i am not noob,i am developer and compiler for many mtk device. sadly this is my FIRST
samsung device also snapdragon. so for me completely unknown.i want in first root and do custom roms but untill now
i dont find any device tree for this device.kernel source i have but device and vendor tree not.then i found i can
flash gsi on this device. so i do as i will explain in following text.
2. as many other of you i have update device on PIE and next days i install update i found possibility to flash gsi,
so i try. i found patched pie boot.img and try to flash gsi roms but none of them isnt boot.so i stop and again read gsi guide
for flash gsi.i read that devices shipped with some firmwares have chance to flash gsi roms.so i found oreo rom
for our device and flash it with odin.rom is boot without any problems.i set up all things as normall(google account)
and after all setup i go to device info and tap on build numbers 7-10 times and then developer settings is open,then i
checked if is there oem unlocking.(if you dont set up google account this settings will not shown(oem unlocking)).
when i see is ok and there,i power off device,go to download mode and connect with pc,and open odin,
and flash twrp(again thanks to ashyx).dont let odin to boot system(turn off auto rebbot in option),
so i reboot to recovery,go to wipe,choose format data,write yes and swipe.
after that i reboot to recovery you MUST flash oreo enforcing.zip,rmm and oreo patched boot.and go to install choose micro sd card and go to flash img. choose gsi rom you want and
flash it as system(pop up windows will ask wich partition you choose(system),then swipe to flash,after flashing you flash magisk,
and go to mount and mount system and reboot to system. firstly your device can reboot once-twice during,but dont worry
after that will go to boot and in short time,one- two minutes will boot.
3.now i must warning you.many of gsi roms work properly,but have many bugs.mtp dont works with pc in boot up,but in recovery
works without problems.for me is not problem,i can live with it.
3.1.sim card 2 is work but sim card 1 is not see it.also i can live with it.most of time i use 1 sim card,not both.
3.2.fm radio isnt show,and not work.
4.in short i give you again flash guide.
go to recovery (must be in oreo)
go to wipe-format data,write yes and swipe to format (many say to need back to recovery,i didnt do that but is your choice).
go to sd card and install oreo enforcing.zip,RMM bypass.zip and oreo patched boot.img
go to install and choose flash.img and choose gsi you want,and flash as system
go to install zip and flash magisk
then go to mount,mount system and reboot to system
device will reboot twice or more time and then after minute or two will reboot.be calm.
after device is reboot,enjoy.:good:
i will post some screenshots of booted gsi roms.oreo and pie.
list of booted gsi rom so far:
1. aex 5.7 oreo
2. aex 6.5 pie
3. aosdp pie(this rom not show network and sim cards)
4. aosp by phusson pie
5. bootlegger oreo
6. descendant 3.0 pie
7. dot os pie(dont show network and simcards)
8. havoc os pie
9. lineage 16 pie
10. RR oreo
11. RR pie
12. system DU oreo
13. xenon hd oreo
GSI with errors:
AOSDP (not shown sim cards,no network,all other stuff work,off course no fm radio)
Evolution X (dont want to boot.)
Octopus OS (dont boot)
Viper OS Official (not shown sim cards,all other stuff work except fm radio)
Dot OS (dont show sim cards,no network,no fm radio)
Liquid Remix (dont boot)
Omni rom (boot but goes constantly on reboot)
Pixel Expirience (boot but no sim cards and no network and no fm radio)
people one more notice: j4+ is ARM A ONLY device,dont flash any other gsi.
Click to expand...
Click to collapse
Thank you for sharing your experience. I was planning on trying to flash a GSI, but I have to wait 7 days for the OEM unlock on Stock Oreo. Of these files you listed, I do not have the "oreo patched boot." This is also necessary, and if so, where do I find it?
Thank you in advance and I count on your help.
Maxmiliano Coelho said:
Thank you for sharing your experience. I was planning on trying to flash a GSI, but I have to wait 7 days for the OEM unlock on Stock Oreo. Of these files you listed, I do not have the "oreo patched boot." This is also necessary, and if so, where do I find it?
Thank you in advance and I count on your help.
Click to expand...
Click to collapse
my dear friend just ask i will help you. this patched boot.img is made by ashyx. i will be bad member if i share his works without permissions.so i share with you his link. here is link for oreo patched boot.img https://androidfilehost.com/?fid=1395089523397921797
please follow instructions carefully. read twice and try to understand.enjoy.if you have any doubt please ask. thank you.
Thanks again. I am waiting for the 7 day period to reappear the OEM unlock option which disappeared when I returned to stock oreo. With your help, the procedure to be performed became clearer. When I do the procedure, can I continue to ask questions if any? I thank you once again.
Maxmiliano Coelho said:
Thanks again. I am waiting for the 7 day period to reappear the OEM unlock option which disappeared when I returned to stock oreo. With your help, the procedure to be performed became clearer. When I do the procedure, can I continue to ask questions if any? I thank you once again.
Click to expand...
Click to collapse
why not.i am not star just ask and if i can help i will please to do that.you can always send me personal message(PM) on xda
Maxmiliano Coelho said:
Thanks again. I am waiting for the 7 day period to reappear the OEM unlock option which disappeared when I returned to stock oreo. With your help, the procedure to be performed became clearer. When I do the procedure, can I continue to ask questions if any? I thank you once again.
Click to expand...
Click to collapse
like https://forum.xda-developers.com/member.php?u=9101376 say in reply if you have unlock before then your device is unlocked.so no need to wait another 7 days.you must just do follow tread for flash recovery.can miss first time,two but read guide and no fear.but you cant miss if you try again. once your device is unlock you can flash no metter numbers of flashing roms(stock 8 or 9)once is unlock thats it.so dont be affraid to ask help here or anywhere on our xda group.always some will help you.:good:
rudi021 said:
like https://forum.xda-developers.com/member.php?u=9101376 say in reply if you have unlock before then your device is unlocked.so no need to wait another 7 days.you must just do follow tread for flash recovery.can miss first time,two but read guide and no fear.but you cant miss if you try again. once your device is unlock you can flash no metter numbers of flashing roms(stock 8 or 9)once is unlock thats it.so dont be affraid to ask help here or anywhere on our xda group.always some will help you.:good:
Click to expand...
Click to collapse
Thank you! I followed in his footsteps and was successful in installing LineageOS 16. Working very well, but I felt a slight problem regarding the audio volume, which is extremely low.
I would like to ask one more question, which is about testing other GSI: Is there a need to install one of those files, or just the image and Magisk?
Thank you very much.
Maxmiliano Coelho said:
Thank you! I followed in his footsteps and was successful in installing LineageOS 16. Working very well, but I felt a slight problem regarding the audio volume, which is extremely low.
I would like to ask one more question, which is about testing other GSI: Is there a need to install one of those files, or just the image and Magisk?
Thank you very much.
Click to expand...
Click to collapse
once you perform flashing gsi,no need repeat every time this steps,just (at least i do like that) format data,reboot to recovery,flash gsi(as system.image) and flash magisk then mount system and reboot.about audio volume install viper fx audio apk(Magisk module),and then fix volume as your own.
kapmino269 said:
If anyone faced problems with booting some roms on
ROM LOGO NOT SAMSUNG .
use this :
https://www.androidfilehost.com/?fid=6006931924117925309
Tested on j415f
RR
AOSP
DESCENDANT ZERO .
Click to expand...
Click to collapse
sorry but this doesnt work on my side of flashing GSI.OREO base. i try on many gsi who doesnt boot but not help. i boot this PIE gsi (on oreo base): descendant 3.1.1.; Prisma os(still cant find way to get network,no sim detected);Havoc os (works perfectly);Dot os 3.0 (same no sim detect); RR 2019-04-06 very nice rom; AEX by enes sastim 2019-05-09(also very nice rom);Viper os (but is Official and dont let use it)(mean boot but no sim works);Zirconium aosp (work well but seems like android kitkat seems so simple(i dont like it);and many more with same problems,they booted but not have network work, or like omni rom booted but reboot and then all over again.have many roms but have problems with our device(mine is sm-j415fn). anyway i try do same in PIE update but cant boot any rom (gsi). why ? dont know? thats why i downgrade in oreo and can flash and boot almost all gsi on list. did they work or not is other story.thank you.
rudi021 said:
sorry but this doesnt work on my side of flashing GSI.OREO base. i try on many gsi who doesnt boot but not help. i boot this PIE gsi (on oreo base): descendant 3.1.1.; Prisma os(still cant find way to get network,no sim detected);Havoc os (works perfectly);Dot os 3.0 (same no sim detect); RR 2019-04-06 very nice rom; AEX by enes sastim 2019-05-09(also very nice rom);Viper os (but is Official and dont let use it)(mean boot but no sim works);Zirconium aosp (work well but seems like android kitkat seems so simple(i dont like it);and many more with same problems,they booted but not have network work, or like omni rom booted but reboot and then all over again.have many roms but have problems with our device(mine is sm-j415fn). anyway i try do same in PIE update but cant boot any rom (gsi). why ? dont know? thats why i downgrade in oreo and can flash and boot almost all gsi on list. did they work or not is other story.thank you.
Click to expand...
Click to collapse
me i have not a network on aex extended but on dot os i have
Envoyé de mon Phh-Treble vanilla en utilisant Tapatalk
kapmino269 said:
Guys , sorry I found error in my script and I fixed it I tested it on AEX official , I will test it in others then post it .
@rudi021
---------- Post added at 09:15 AM ---------- Previous post was at 08:29 AM ----------
v2 : https://www.androidfilehost.com/?fid=6006931924117930007
tested : work with rom logo bootloop 100%
Click to expand...
Click to collapse
thank you bro. i definetly try this on pie upgrade and inform you.thank you for your hard work. i am on vacation and when i come home i will try this.thank you and greetings from Croatia.:good:
also i stop build gsi roms for j4+ because my pc is old so i need little upgrade of same( RAM(have only 4 gb,need for pie at least 8 gb ,my motherboard can have 32 gb,), my processor is i3 but i will upgrade on i5 and after that i will continue work on it. but now i am on vacation with my wife and children and when i come hom ei will continue to work it.thank you once more.
This recovery was not made by me, i'm just sharing it in easier ways to download. The guy behind this is wzsx150, thank him for it.
After a lot of pain researching and trying to download from Baidu servers i finally managed to get this custom TWRP to get rid of force encryption on stock MIUI because this recovery can successfully decrypt with no need to do a format data.
Just installed magisk v20.4 on stock rom close avb 2.0 it work
Install Instructions
Warning: unlocked bootloader needed!
Fastboot
1. Download IMG file below
2. Rename file to recovery.img and put it into your adb path (if you don't have adb check this https://forum.xda-developers.com/showthread.php?t=2588979
3. Reboot your device into fastboot mode by holding down vol - and power button while device is off and connect to PC
4. Open cmd in your adb path and run the following command: fastboot flash recovery recovery.img
5. Run fastboot reboot, and hold down vol + key until device enters into twrp
confirm device
RMX2071 ,RMX2072,RMX2075,RMX2076 test working
Downloads
IMG {Mod edit}
Special Thanks
- TeamWin for building TWRP for a lot of devices, including this one
- wzsx150 and LR.Team for making this mod
- Firmwarex.net for providing a free Baidu account to download from their servers
Source:https://www.weibo.com/6033736159/Ig...6159_profile&wvr=6&mod=weibotime&type=comment
thanks, have you tried it? on what rmx are you?
Rmx2071-72
gege0202 said:
thanks, have you tried it? on what rmx are you?
Click to expand...
Click to collapse
I rooted my realme x50 pro eu version (rmx2075)
Evrything is working as intended even safetyNet is passing.
The only problem is the fingerprint sensor isn't working at all :/
Did you or someone got the same problem ??
magisk 20.4 with lasted OTA security patch
(RMX2075_11_A.20)
Lukylix said:
I rooted my realme x50 pro eu version (rmx2075)
Evrything is working as intended even safetyNet is passing.
The only problem is the fingerprint sensor isn't working at all :/
Did you or someone got the same problem ??
magisk 20.4 with lasted OTA security patch
(RMX2075_11_A.20)
Click to expand...
Click to collapse
Not tested !
https://forum.xda-developers.com/apps/magisk/module-fingerprint-scanner-booster-t3688637
Lukylix said:
I rooted my realme x50 pro eu version (rmx2075)
Evrything is working as intended even safetyNet is passing.
The only problem is the fingerprint sensor isn't working at all :/
Did you or someone got the same problem ??
magisk 20.4 with lasted OTA security patch
(RMX2075_11_A.20)
Click to expand...
Click to collapse
You have to calibrate it entering a secret menu
anyone tried this on RMX2076?
kinglight123 said:
Rmx2071-72
Click to expand...
Click to collapse
So works on rmx2072? (X50 Pro 5g Player Edition)
Lukylix said:
I rooted my realme x50 pro eu version (rmx2075)
Evrything is working as intended even safetyNet is passing.
The only problem is the fingerprint sensor isn't working at all :/
Did you or someone got the same problem ??
magisk 20.4 with lasted OTA security patch
(RMX2075_11_A.20)
Click to expand...
Click to collapse
UPDATE:
After some testing this bug is due to the AVB unlock methode of this TWRP
not magisk
Lukylix said:
UPDATE:
After some testing this bug is due to the AVB unlock methode of this TWRP
not magisk
Click to expand...
Click to collapse
Can we flash Magisk without breaking the Fingerprint?
hi guys i managed to run the root on rmx2075 / 2076 for twrp do you know something?
Samuel1981 said:
hi guys i managed to run the root on rmx2075 / 2076 for twrp do you know something?
Click to expand...
Click to collapse
With Magisk? Does the Fingerprint still work?
it works perfectly
after unlocked bootloader and install TWRP .
Can I flash EU Firmware (2075) For Change Rom on Device CN Version (2071) ?
kinglight123 said:
...
Source:https://www.weibo.com/6033736159/Ig...6159_profile&wvr=6&mod=weibotime&type=comment
Click to expand...
Click to collapse
@kinglight123 THREAD CLOSED! Recovery must be accompanied by its source in compliance with GPLv3 – download link removed! The provided link as source doesn't fulfill this requirement.
Please advise the moderators team when ready to provide a link to source.
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
as soon as the .eu comes out I install
Enviado desde mi Mi 9T mediante Tapatalk
Micdu70 said:
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
Click to expand...
Click to collapse
Thanks for rectification ?
HumptyPotato47 said:
If i install china beta, i will get ota updates weekly ? Updates will work normally ?
Click to expand...
Click to collapse
Not certain about this but i think they support ota, maybe wait for xiaomi.eu if you really need ota?
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
Official TWRP 3.4.0.0 or something else?
so, this means this phone will be get miui 13 and android 11 officially, right?
GabiML said:
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
Click to expand...
Click to collapse
yy i try it with 10.0.2 and i boot up without any problem, but when you need flash back a10 rom you must wipe data / system before...
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
HumptyPotato47 said:
Just download the latest official version which is 3.4.0.0
Click to expand...
Click to collapse
do i just flash the recovery because i had mauronofrio and orangefox right now
Soft Bricked
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
mzan said:
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
Click to expand...
Click to collapse
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
sidodz said:
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
Click to expand...
Click to collapse
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
mzan said:
TWRP - Latest = Yes
6) advance wipe - dalvik cache/system/data/cache
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think you should've formatted data, then after a reboot wipe.
HumptyPotato47 said:
xiaomi.eu version finally released.
https://sourceforge.net/projects/xi...iles/xiaomi.eu/MIUI-WEEKLY-RELEASES/20.10.22/
Click to expand...
Click to collapse
do you know if i need to clean install this weekly?
I just did the clean install.
so far everything ok!
mzan said:
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think unlike previous iterations, we don't wipe system partition with these Roms as long as the vendor is same. (Means, If within MIUI Roms, no need. likewise with others such as AOSP)
strokesbr said:
I just did the clean install.
so far everything ok!
Click to expand...
Click to collapse
please mention the steps as for a rookie. pls
Thank You,
mzan said:
please mention the steps as for a rookie. pls
Thank You,
Click to expand...
Click to collapse
If your boot-loader is unlocked and have twrp, just FORMAT DATA, cache & Dalvik and flash the A11 Weekly Rom. Clean installation means formatting DATA partition and setting up as new.
I'm on weekly 20.09.17 and will be flashing the latest A11 weekly end of the day after work.
Edit: When you format DATA, your internal storage too would be wiped. So Make sure you have a PC (To mount twrp and copy the file) or OTG to push the Rom file to internal storage after formatting data.
manosath said:
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
Click to expand...
Click to collapse
https://t.me/randomdavinci/33877
I have updated to ANDROID 13 in my Realme GT 5G and i have unlocked bootloader, does anyone know how to root it?
F0Xie said:
I have updated to ANDROID 13 in my Realme GT 5G and i have unlocked bootloader, does anyone know how to root it?
Click to expand...
Click to collapse
How you updated?
Please let me know how you did it.
Tanks
snorlex said:
How you updated?
Please let me know how you did it.
Tanks
Click to expand...
Click to collapse
Public Beta
For clarification, does this method not work anymore on Android 13?
How I rooted my international (EU) Realme GT 5G
I couldn't find any simple instructions for rooting so hopefully this helps someone. I'm assuming you've already unlocked your bootloader. If not, download the deep testing app (there are various apks on xda e.g. from here). Then submit the...
forum.xda-developers.com
Polo4413 said:
Public Beta
Click to expand...
Click to collapse
Hello!
Where can I download it? Can you send us a download link?
kovidancsi said:
Hello!
Where can I download it? Can you send us a download link?
Click to expand...
Click to collapse
Only for chinese rom (domestic). There's a thread on the GT forum page
I extracted the boot.img from RMX2202_11_F.02 (Android 13 global stable version) using payload dumper
You can patch it with your Magisk app (like Magisk Delta to get Magisk hide back) and then flash the patched file with fastboot :
fastboot flash boot_ab patched_boot.img
If your bootloader isn't unlocked, you need to unlock it via the deeptest apk somewhere in this forum
Also since you're in beta version, you may need to wipe to get back to stable Android 13
Altefier said:
For clarification, does this method not work anymore on Android 13?
How I rooted my international (EU) Realme GT 5G
I couldn't find any simple instructions for rooting so hopefully this helps someone. I'm assuming you've already unlocked your bootloader. If not, download the deep testing app (there are various apks on xda e.g. from here). Then submit the...
forum.xda-developers.com
Click to expand...
Click to collapse
It may not work, because the twrp provided is for Android 12, we need to wait for a TWRP Android 13
[RMX2202] Realme GT 5G (UI2.0, UI3.0 & UI4.0) - Full Package Update File
RMX2202 GDPR : UK, FR, IT, DE,ES, PL, CZ RMX2202 export : TW, TH, IN, RU RMX2202 domestic : CN How to check? Dial *#899# 👉 Software Version Realme GT 5G - Tutorial How to Convert Your ROM to Other Region using TWRP Realme UI 2.0...
forum.xda-developers.com
You can find the boot.img for your version here
boot to twrp,
then adb push Magisk-v25.2.zip /tmp
then adb shell /bin/twrp install /tmp/Magisk-v25.2.zip
and then reboot to system
callme-sy said:
It may not work, because the twrp provided is for Android 12, we need to wait for a TWRP Android 13
Click to expand...
Click to collapse
I tried it and it worked
Note that I already had Magisk root before updating to Android 13, then I simply repeated the steps like I usually do whenever there was an update for Android 12. I don't know if that makes a difference, probably not, but better to mention it I think
Hello,
I was rooted on F.02 (realui 4 - android 13). My method was to
1. go in bootloader (adb reboot bootloader)
2. boot in twrp (fastboot boot twrp.img)
3. extract boot.img (adb shell - dd if=... of=...)
4. reboot and patch the file via magisk
5. boot only with the patched boot image
6. let magisk (that in this moment has root) patch, making a backup for next otas, and root the existing installed boot image
Unfortunately from F.03, installed succesfully today via OTA, the step 4 (fastboot boot magisk_patched_boot.img) is not going anymore.
Does anyone has news for a new magisk version for android 13 (or realui4 - f.03)?
Thanks
xranix said:
Hello,
I was rooted on F.02 (realui 4 - android 13). My method was to
1. go in bootloader (adb reboot bootloader)
2. boot in twrp (fastboot boot twrp.img)
3. extract boot.img (adb shell - dd if=... of=...)
4. reboot and patch the file via magisk
5. boot only with the patched boot image
6. let magisk (that in this moment has root) patch, making a backup for next otas, and root the existing installed boot image
Unfortunately from F.03, installed succesfully today via OTA, the step 4 (fastboot boot magisk_patched_boot.img) is not going anymore.
Does anyone has news for a new magisk version for android 13 (or realui4 - f.03)?
Thanks
Click to expand...
Click to collapse
Sorry, my bad. was using wrong boot slot (boot_b instead of boot_a) for boot extrction/dump - point 3. nevermind.
bye
im on rui 4 android 14 can i open the botloader?