Hi Folks, any info if the US edition of the Xperia 1V supports eSIM ?
hnt20 said:
Hi Folks, any info if the US edition of the Xperia 1V supports eSIM ?
Click to expand...
Click to collapse
when I had mine I never saw one and even it was Dual sim, which the sim tray has 2 spots for your sim card, so it does not have ESIM.
it should. And it has nothing to do with a slot. Just go to network and internet and next to SIMs there is a + sign, from there you can add eSIM.
well from Sony info and they instructions says the XQ-CT54 only supports ESIM:
Inserting a SIM card and memory cardYour device supports nano SIM cards.
The XQ-CT54 supports the use of one nano SIM card and a memory card. You can use the device as a dual SIM device by inserting a nano SIM card and configuring an eSIM.
The XQ-CT62/XQ-CT72 supports the use of either two nano SIM cards or a nano SIM card and a memory card.
Note
Even if you use two SIMs that support 5G, you can only use 5G on the SIM set for data traffic. You cannot use 5G on two SIMs at the same time.
XQ-CT54: You do not need to insert a nano SIM card if you will only use an eSIM.
Unmount the memory card before removing it to prevent loss of data. To remove the memory card safely, find and tap [Settings] > [Storage], tap [This device] to select [SD card], and then tap
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(More icon) > [Eject].
confirmed, thank you. only XQ-CT54 supports eSIM. US model XQ-QT62 does not support eSIM, instead, it has physical dual slots
Hi, I have the XQ-CT54 , would using a dual sim tray from XQ-QT62 work on the XQ-CT54? Meaning would it take two physical nano on the XQ-CT54 which is actually 1nano and esim version?
i think not. Guess they would not bother with different trays and eSIM only for 54 if simple swapping would work. Maybe HW is identical but SONY likes to play dumb in so many occasions with their products and services that are available in one country but not in the one next to it.
Now we have situation where apple is eSIM only in USA and SONY does not support it at all. Dumb and dumber.
I see, I can't find any dual sim trays available online for Sony Xperia 1 iv.
Related
Has anyone tried this on Moto Z?
muntaha_v3 said:
Has anyone tried this on Moto Z?
Click to expand...
Click to collapse
Nope I have not but it looks very interesting......
Thanks for sharing.!
Wouldn't the Moto Z need the SIM connectors opposite the SIM/microsd tray for this to work? I think it works on the S7 because it has those connectors because you can do both with the second tray
muntaha_v3 said:
Has anyone tried this on Moto Z?
Click to expand...
Click to collapse
It would be very nice. I´ve seen a tutorial for another moto phone (no remember wich one) so I think it is possible to get the "Sd -sim" mode, I goona try as soon as I can get a micro sim that I can dissemble.:good:
There is russian speaking community forum called 4pda.
And there is one guy who made a hybrid mod with no issues.
Photos : http://4pda.ru/forum/index.php?showtopic=783065&view=findpost&p=58407371
dolar4ik said:
There is russian speaking community forum called 4pda.
And there is one guy who made a hybrid mod with no issues.
Photos : http://4pda.ru/forum/index.php?showtopic=783065&view=findpost&p=58407371
Click to expand...
Click to collapse
Thanks
I was using it on my Note 7 and S7
Was worried about trying it on Moto Z.
Will do it tomorrow and report here how it goes
Does the xt1650 even have phone contacts for a second SIM?
I'm pretty sure you need to make sure your phone is dual sim compatible for this to even work... So don't try this unless you actually have a dual sim variant.
Any one get the video tutorial for this???
I just tested this on my XT1650-03, running NPL25.86-15. It works!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Used this tutorial:
https://www.youtube.com/watch?v=6kAeF3BdHlw
NOTE1: You need to verify the correct placement and orientation of the SIM chip. It is different from the tutorial vid. Check it before you remove the SIM chip from the plastic card.
NOTE2: Insert the tray into the phone GENTLY! The MicroSD+SIM is slightly thicker than the Moto Z is designed for, so it took me a bit of wiggling before it would slide in.
Confirmed working
Second that, with unlocking the second SIM on a EU 1650-03 single SIM
Hello,
I'm trying to change the sim card for mobile data but it is blurred out. What could be the problem?
i,imgur,com/ysEfKVP,jpg
Which model you have and which ROM is on board?
Same issue.
I have the same issue with my x829 on the stock EUI 5.0.16S.
I've looked for all the settings and can't seem to make the option appear selectable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same issue too, cannot switch mobile data on sim 2
Like Tiago,
My le max 2 x829 on eui 5.8.16s
Please help.
Only SIM 1 supports data. SIM 2s functions are very limited.
Immortal68 said:
Only SIM 1 supports data. SIM 2s functions are very limited.
Click to expand...
Click to collapse
"This is obvious not true. I have x522 S3. If I use the chinese newest rom: EUI Version: 5.9.026S, I can connect to 4GLTE by switching between two sims. If I use the newest US ROM: 5.8.021S, the mobile data option is grey, and cannot be changed. It looks to me that it is a software problem.
However, I can only use wifi calling (Tmobile) using 5.8.021S. The wifi calling function on 5.9.026S gives me error 99.
It is a shame that le eco cannot update the US version to 5.9."
In US ROM: 5.8.21S, root the phone, then use buildprop editor to change the value:
persist.le.fixDataSimForNA=true
to
persist.le.fixDataSimForNA=false
Now you can switch data between two sims.
hubh98 said:
"This is obvious not true. I have x522 S3. If I use the chinese newest rom: EUI Version: 5.9.026S, I can connect to 4GLTE by switching between two sims. If I use the newest US ROM: 5.8.021S, the mobile data option is grey, and cannot be changed. It looks to me that it is a software problem.
However, I can only use wifi calling (Tmobile) using 5.8.021S. The wifi calling function on 5.9.026S gives me error 99.
It is a shame that le eco cannot update the US version to 5.9."
In US ROM: 5.8.21S, root the phone, then use buildprop editor to change the value:
persist.le.fixDataSimForNA=true
to
persist.le.fixDataSimForNA=false
Now you can switch data between two sims.
Click to expand...
Click to collapse
This could very well be a software issue, but the x522 S3 is a different device altogether. Not sure where you take the confidence to say that it's definitely not a hardware issue, since we're talking about the Le Max 2, not the S3.
I had a virtually unused Note 8, on the shelf for a longer time. Just working let's say more than a year ago, nothing to worry about. Until this summer I decided to give it to my mother. Her antique Telfort ( Dutch former provider) SIM did not work when inserted, so it took a while until we requested a new SIM from KPN ( the provider that bought Telfort). The device is completely 'up to date', with the latest updates with security patch from January '21.
Device is now also simply on PHN / PHN / PHN. The SIM is recognized (several SIMs have been tried, also other network-operators). Entering the PIN code is also fine, but there is always that 'mobile network not available' with also the icon on the screen in the statusbar.
What have I already done:
Factory reset, wipe cache, also for all system apps such as SIM toolkit and SIM card management & the Phone app data and cache deleted, forced stopped,
flashed again via ODIN the original latest ROM,
SIM cards from different providers on the different slots .... etc. etc. ..... It is a Dual-SIM, SIM cards are recognized on both slots.
What I am still thinking about, but I do not immediately see the connection, is that I once got call recording working with a Thai SIM in this device. This has not caused any problems in all my other devices of this generation (S7, S8, S9, S10). I have checked Imei number and there shouldn't be a problem with it. Wonder if anyone has any suggestions ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
amazinged said:
I had a virtually unused Note 8, on the shelf for a longer time. Just working let's say more than a year ago, nothing to worry about. Until this summer I decided to give it to my mother. Her antique Telfort ( Dutch former provider) SIM did not work when inserted, so it took a while until we requested a new SIM from KPN ( the provider that bought Telfort). The device is completely 'up to date', with the latest updates with security patch from January '21.
Device is now also simply on PHN / PHN / PHN. The SIM is recognized (several SIMs have been tried, also other network-operators). Entering the PIN code is also fine, but there is always that 'mobile network not available' with also the icon on the screen in the statusbar.
What have I already done:
Factory reset, wipe cache, also for all system apps such as SIM toolkit and SIM card management & the Phone app data and cache deleted, forced stopped,
flashed again via ODIN the original latest ROM,
SIM cards from different providers on the different slots .... etc. etc. ..... It is a Dual-SIM, SIM cards are recognized on both slots.
What I am still thinking about, but I do not immediately see the connection, is that I once got call recording working with a Thai SIM in this device. This has not caused any problems in all my other devices of this generation (S7, S8, S9, S10). I have checked Imei number and there shouldn't be a problem with it. Wonder if anyone has any suggestions ?
View attachment 5193615
Click to expand...
Click to collapse
You sure the phone is unlocked to the network? Tried checking the APN settings? It's all I can think of. I change my csc to get native call recording and have never faced an issue so I doubt it is that.
I have purchased several A7 lite devices that all boot to to the screen shown here. I have tried to up install the proper firmware with no change to the opening screen. When I click "Start" it asks for a SIM card to connect to the network. Any suggestions to getting these tablets back to the correct O/S?
Thanks, Tom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
schweg said:
I have purchased several A7 lite devices that all boot to to the screen shown here. I have tried to up install the proper firmware with no change to the opening screen. When I click "Start" it asks for a SIM card to connect to the network. Any suggestions to getting these tablets back to the correct O/S?
Thanks, TomView attachment 5676745
Click to expand...
Click to collapse
Hello friend, were you able to find a solution to this problem, I have the same problem as you, I need help! please.
I'm sorry but what is wrong with this screen? If it's a carrier locked T-Mobile a7 Lite it may need a sim to work.
the_Victorian said:
I'm sorry but what is wrong with this screen? If it's a carrier locked T-Mobile a7 Lite it may need a sim to work.
Click to expand...
Click to collapse
I will tell you what happened to me, I bought a device on ebay, the model is sm-t227u from t mobile, the same as the image above, when I bought it it said that it was sold and it was unlocked, I was not at home when the package arrived, It took a long time to arrive and the return time passed, my surprise when I arrived and installed the chip is that it is blocked and does not let me pass. It only allows me to configure it by QR code for an organization.
My question is if I can pass the startup configuration without having to install the sim card, this is because I'm not in the USA right now.
harrisonMiguel said:
I will tell you what happened to me, I bought a device on ebay, the model is sm-t227u from t mobile, the same as the image above, when I bought it it said that it was sold and it was unlocked, I was not at home when the package arrived, It took a long time to arrive and the return time passed, my surprise when I arrived and installed the chip is that it is blocked and does not let me pass. It only allows me to configure it by QR code for an organization.
My question is if I can pass the startup configuration without having to install the sim card, this is because I'm not in the USA right now.
Click to expand...
Click to collapse
The problem with configuring by QR code is that it has many limitations and it doesn't let me do almost anything, or delete anything, the apps that I install are deleted in a certain period of time.
Please if you can help me I would really appreciate it!
I purchased a T-Mobile Connect $!0.00 prepaid sim card inserted it and then went on line to T-Mobile to unlock the tablet. You have to be a customer for them to unlock it. They unlocked 4 tablets and I switched to Mint Mobile. The total price per device to T-Mobile was $10.00 plus tax for the plan (one month) and $10.00 charge for the sim. That was reasonable considering I got the 4 tablets for $52.00 each brand new.
So I bought an Australian model of the S23 Ultra, model S918B with a single SIM tray, eSIM and two distinct IMEIs. Dual sim dual standby works normally with a SIM and eSIM. In 'About phone', the IMEIs are listed as 'IMEI' and 'IMEI (eSIM)', not 'IMEI (slot 1)' and 'IMEI (slot 2)'.
But I prefer a dual physical SIM setup, so I got a dual SIM tray from aliexpress, which fits both SIMs perfectly. But the device will not recognize the second SIM no matter what CSC I changed to, including INS, XXV, THL, where dual physical SIMs S918B/DS are sold. The model number does change to S918B/DS, but IMEIs are still 'IMEI' and 'IMEI (eSIM)'.
There are some strange things that I observed. When I change CSC to a market with dual physical SIMs and factory reset, the second SIM will work normally during the setup wizard, until I finish setting up, when it immediately got disabled. Also, if I change CSC to WWD (demo CSC), second SIM slot will work, BUT there is no SIM manager, eSIM nor OTA updates, which is undesirable.
Currently I am on the April update, with system shell exploit working. April is the last version that the system shell exploit can work. https://github.com/wr3cckl3ss1/system_shell_2
Do you guys have an idea on how to do enable the second physcial SIM using the exploit, without tripping Knox and breaking other features? Considering that the device already has 2 IMEIs, IMEI duplication is not required like some older devices (such as S9, S10 Exynos with single SIM). Thanks very much for your help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try EUX CSC, But maybe is your country sim dont let you have 2 fisical sim's , with config your phone wil recognise your region sim...
Nmc_alves® said:
Try EUX CSC, But maybe is your country sim dont let you have 2 fisical sim's , with config your phone wil recognise your region sim...
Click to expand...
Click to collapse
Tried that, still the same.
I guess it might be related to the phone's original CSC, which is XSA (Australia - the last CSC in software provider version). It is not changed when changing CSC, only the first 3 values.