I just upgraded my Realme 7 Pro firmware which was the initial RMX2170_11_C.28 (Android 11 Rui2.0) to RMX2170_11_F.21 (Android 12 Rui3.0). Before being upgraded by Realme 7 Pro, I was rooted and used TWRP version 3.5.0 and normal.
When I upgraded to Android 12 Rui3.0, all my Root Realme 7 Pro disappeared along with TWRP.
Then I tried to install TWRP version 3.5.2, I could enter TWRP but when Booting TWRP disappeared again and entered the factory recovery.
Please help senior for my problem ....
You need to use a recovery for android 12
for some reason with this phone the version of the recovery must match the android version
This orangefox works with android 12 and stock firmware
Also, you can install magsik and get root directly from the recovery itself
[RECOVERY][RMX2061][RMX2170][Unofficial]OrangeFox Recovery Project [R11.X]
OrangeFox Recovery Project /* * Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
Related
Hi,i have tried to update my ALP-L29 to 9.0 with flashy_0.2 .It failed after %80.Then i have flashed TWRP to install 8.0 again but it did not boot to TWRP.Now i can only boot to fastboot Phone Unlocked FRP locked.I tried to flash stok recovery again but it gives FAILED (remote: Command not allowed).How can i get to 8.0 agian?Pls help.
aydink1979 said:
Hi,i have tried to update my ALP-L29 to 9.0 with flashy_0.2 .It failed after %80.Then i have flashed TWRP to install 8.0 again but it did not boot to TWRP.Now i can only boot to fastboot Phone Unlocked FRP locked.I tried to flash stok recovery again but it gives FAILED (remote: Command not allowed).How can i get to 8.0 agian?Pls help.
Click to expand...
Click to collapse
Searching in Google downgrade pie 9
Enviado desde mi ALP-L09 mediante Tapatalk
I bricked my Huawei Mate 10 too
Removed to avoid spamming
Carnage! said:
Mine is kind of different though, update to Android 9.0 was successful but the problem started after trying to downgrade my device.
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
No with hwota is another programa
Enviado desde mi ALP-L09 mediante Tapatalk
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
Carnage! said:
Mine is kind of different though, update to Android 9.0 was successful but the problem started after trying to downgrade my device.
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
http://www.mediafire.com/file/...zb/BLA_beta-downy_0.4.zip/file
Enviado desde mi ALP-L09 mediante Tapatalk
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Flash Rom works
- F2FS support
- Fastboot boot command support
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash (system-vendor-product)
Download:
TWRP 3.4.0-12 Unofficial by mauronofrio
TWRP 3.4.0-11 Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial by mauronofrio
To Flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/Teamwin/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_curtana
Precompiled stock kernel
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
- Thanks to @bigbiff and @Captain_Throwback for the hard work on this android 10 TWRP
Thanks to all testers on the Telegram Group
Created 2020-06-30
TWRP 3.4.0-11 for Xiaomi Redmi Note 9S/9 Pro/9 Pro Max/Poco M2 Pro (curtana-joyeuse-gram-excalibur):
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash
TWRP 3.4.0-11 Unofficial by mauronofrio
mauronofrio said:
TWRP 3.4.0-11 for Xiaomi Redmi Note 9S/9 Pro/9 Pro Max/Poco M2 Pro (curtana-joyeuse-gram-excalibur):
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash
TWRP 3.4.0-11 Unofficial by mauronofrio
Click to expand...
Click to collapse
Nice work kudos to your work by the way what's F2fs support means?
mauronofrio said:
TWRP 3.4.0-11 for Xiaomi Redmi Note 9S/9 Pro/9 Pro Max/Poco M2 Pro (curtana-joyeuse-gram-excalibur):
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash
TWRP 3.4.0-11 Unofficial by mauronofrio
Click to expand...
Click to collapse
thanks for the recovery
Encountered bugs on gram
Can't flash magisk or any zip after flashing a10 rom needs ti restart recovery after flashing rom.
A11 rom can't be flashed using this recovery.
More than one migrate zip can't be flashed at once.
bhanu saini said:
Nice work kudos to your work by the way what's F2fs support means?
Click to expand...
Click to collapse
Its filesystem format ,it a bit faster than ext4 format which default
Thanks for new ver TWRP 3.4.0-12...
can I flash both a10 and a11 roms with this ver?
is there any magisk flash issue in this ver?
I've followed every step mentioned by you but still, I'm facing multiple issues here:
Screen goes all black after this command 'Fastboot boot twrp.img'.
However, instead if I press volume up+key to reboot into TWRP
Strange folder names are showing can't flash any Zip.
And last,
Stock recovery replaces TWRP every time I get back to the system
Also I forgot to mention,
.) When I first time boot into TWRP, it asks me to enter password even though I haven't set any password in my device.
i flashed the wrong file in htis order firmware update,oneplus7pro oxegen os ,since i saw it as fail i formated it then clicked reboot to recovery then i got stuck in fastboot even my twrp is gone. I tried every ROM but it is not working.. I have unlocked bootloader so I tried flashing miui stock ROM with mi flash. Its gives success message but the phone. Boots into fatsboot mode only.. but I tried to flash miui 10 Oreo 8.os1 ROM.. The phone is booting.. If I flash any other ROM other than miui Oreo 8.1 phone boot into fastoot mode. And when I flash twrp I gets successfully flashed. But when I try to boot into twrp. it is failing giving message.. FAILED TO LOAD /AUTHENTICATE BOOT IMAGE BOOT IMAGE 0000005.. Please help me
HELP ME WITH MY PROBLEM
Mobile data is not connecting properly after changing motherboard in MI Service Center
Mi changed my phones mother board under warranty after that my mobile`s mobile data 4g connectivity is low. when i asked them they say its because your using Airtel Sim try using JIO. i came home and tried Jio Sim but problem continued. then i...
forum.xda-developers.com
Hello,
I had similar problem with TWRP. I solved it like that I shut down phone. Than in fastoobt mode (follow some instruction via YouTube) install TWRP, and than insert appropriate rom. After that installation pass just fine.
dbnscz said:
Hello,
I had similar problem with TWRP. I solved it like that I shut down phone. Than in fastoobt mode (follow some instruction via YouTube) install TWRP, and than insert appropriate rom. After that installation pass just fine.
Click to expand...
Click to collapse
Which video
I followed this one:
Google it, find one that is easy for you. There are plenty guides and tutorials
I have seen many people facing this issue where they flashed a OxygenOS rom of different phone ( Due to a idiot youtuber said it can be flashed on all devices )
I recently recieved a POCO F1, with same condition where i cannot update MIUI over Oreo firmware.
So, this guide is for those people who cannot boot any new MIUI other than Oreo OTA
* First make sure you are on Oreo MIUI and your device is working fine.
* Download Latest MIUI A10 OTA and extract it.
* From the above latest OTA pick system, vendor and boot images and place them in any folder.
* Flash system, vendor and boot through fastboot mode using following commands:
fastboot flash system path_to_the_files\system.img
fastboot flash vendor path_to_the_files\vendor.img
fastboot flash boot path_to_the_files\boot.img
* Now Flash lastest recovery for Poco F1 (OOFGang TWRP Suggested ).
* Boot into twrp and flash this fiirmware only (also attached below).
* Format Data and reboot.
* You have A10 MIUI installed.
Notes:
* Dont do anything other than mentioned step else can hardbrick device.
* Dont flash any OTA directly on the device either from fastboot or recovery.
* Dont flash new firmware else you can hardbrick device.
* After insatlling MIUI A10 you can install any rom without any probllem just make sure they dont include any firmware.
DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
hello
i have the same problem , can somebody help me out??
my poco phone f1 stuck in fastoot mode and i cant even flash stock rom it will boot back to fastboot.
thanks
My poco f1 fastboot was not connecting to anything and this video worked well for the problem.
need to run this in PC then go to fastboot and it worked very well.
tomatking1234567 said:
i flashed the wrong file in htis order firmware update,oneplus7pro oxegen os ,since i saw it as fail i formated it then clicked reboot to recovery then i got stuck in fastboot even my twrp is gone. I tried every ROM but it is not working.. I have unlocked bootloader so I tried flashing miui stock ROM with mi flash. Its gives success message but the phone. Boots into fatsboot mode only.. but I tried to flash miui 10 Oreo 8.os1 ROM.. The phone is booting.. If I flash any other ROM other than miui Oreo 8.1 phone boot into fastoot mode. And when I flash twrp I gets successfully flashed. But when I try to boot into twrp. it is failing giving message.. FAILED TO LOAD /AUTHENTICATE BOOT IMAGE BOOT IMAGE 0000005.. Please help me
Click to expand...
Click to collapse
the same things happen with me . is there any solution
Rastvo said:
hello
i have the same problem , can somebody help me out??
my poco phone f1 stuck in fastoot mode and i cant even flash stock rom it will boot back to fastboot.
thanks
Click to expand...
Click to collapse
did you solve your problem
chef.hira said:
I have seen many people facing this issue where they flashed a OxygenOS rom of different phone ( Due to a idiot youtuber said it can be flashed on all devices )
I recently recieved a POCO F1, with same condition where i cannot update MIUI over Oreo firmware.
So, this guide is for those people who cannot boot any new MIUI other than Oreo OTA
* First make sure you are on Oreo MIUI and your device is working fine.
* Download Latest MIUI A10 OTA and extract it.
* From the above latest OTA pick system, vendor and boot images and place them in any folder.
* Flash system, vendor and boot through fastboot mode using following commands:
fastboot flash system path_to_the_files\system.img
fastboot flash vendor path_to_the_files\vendor.img
fastboot flash boot path_to_the_files\boot.img
* Now Flash lastest recovery for Poco F1 (OOFGang TWRP Suggested ).
* Boot into twrp and flash this fiirmware only (also attached below).
* Format Data and reboot.
* You have A10 MIUI installed.
Notes:
* Dont do anything other than mentioned step else can hardbrick device.
* Dont flash any OTA directly on the device either from fastboot or recovery.
* Dont flash new firmware else you can hardbrick device.
* After insatlling MIUI A10 you can install any rom without any probllem just make sure they dont include any firmware.
DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
Click to expand...
Click to collapse
all thanks to you buddy i revived my poco f1 again.
but still i can't flash any other rom on a10
so here i revived my poco throgh this
al thanks to developers
POCO F1 stuck on Oreo FIX
This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours. Step 1 : Root your Oreo rom using magisk...
forum.xda-developers.com
I’m looking for OS file for a Samsung Galaxy Tab4 SM-T530. I’m trying to use TWRP to install it as well. I have tried looking and I’m not having any luck. Any file I find and I try and install it. It said It can’t find the Google Binary. And help would be appreciated.
If you have twrp installed wipe first and install this
LightningFastRom-17.1 (Q/10)
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now...
forum.xda-developers.com
If you can't flash TWRP try disable auto reboot in Odin options, force reboot , and immediately boot into twrp.
hi all
my phone Xiaomi Mi8 pro Equuleus was flashed custom Oxygen os and bricked my phone.
Now i cannot install android 9 and 10 miui stock firmware.
Everytime i install Mi8pro fastboot firmware android 9 , android 10,
get stuck into Bootloader.I tried <Wipe /format > in recovery ,but did not boot to system.
always loop into fastboot mode.
Only android 8.1 rom boot to system successfully.
I cannot upgrade to pie and Q rom.
help me .
sorry for my english.