Development [ROM][UNOFFICIAL][pdx215][13] CherishOS 4.7 - Sony Xperia 1 III

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CherishOS is an AOSP based rom focusing on Unique and Smooth UI with handy features. CherishOS is a reborn of pie based Dot-ExtendedOS.
Unofficial CherishOS​
Code:
/* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Notes​1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)​2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher​3. 120Hz & HS (Renamed to Pause Charging) can be enabled from the QS Panel​Support group available on Telegram!​
What works?​• Wi-Fi
• Wi-Fi 6e
• Mobile Data
• Bluetooth
• SDCard
• Cameras
• GPS
• LED
• Flashlight
• Fingerprint Sensor
• Battery Health Statistics
• Pause Charging
• Battery Care
• Sound
• Vibration
• Creator Mode
• HDR10+
• 120Hz
• 240Hz Touch Sampling
What's broken?​• LDAC
• Lock Icon is placed under charging stats on the lock screen (Visual Bug, 4.6.1)
• Bad Wake Up delay (4.7)
• Stuck on Setup Screen (4.7)
• Smart Pixels
• You tell me
Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the link below)​Clean Flash:​
Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery
Factory Reset > Format data/factory reset
Click to expand...
Click to collapse
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
BUT If you want to flash Magisk go to
Advanced > Reboot to bootloader
Click to expand...
Click to collapse
Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot
Updating from a older build (Dirty Flash):​
Code:
adb reboot bootloader
fastboot reboot recovery
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk
Download:
Folder Download
Sources:
CherishOS Source
Device Tree
Kernel Source
Build Author | Maintainer
Saku
Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
Android Version: 13
Kernel Version: 5.4.233
Version Information
Status: Stable
CherishOS Version: 4.7
SELinux Status: Enforcing
Release Date: 11/04/2023
Last Updated: 13/04/2023

UPDATE 1
- Updated to CherishOS 4.7
- Kernel upstreamed to 5.4.233
- Kernel Updated Krispy-v1.2 -> Krispy-v1.2.1
- Switch from QCom HIDL USB HAL to Pixel AIDL USB HAL
- Do NOT flash 4.7 it's very buggy (can't even get past setup screen) please keep using 4.6.1 for now... This release was just to list the new features/improvements.

This ROM makes me want to unlock bootloader again. Thanks bro!
UPDATE:
Just installed this ROM and it runs so smooth. I'm not rooted and everything is working just fine.

Any initial thoughts on battery life?

The_Maze said:
Any initial thoughts on battery life?
Click to expand...
Click to collapse
Should be vastly improved since I've updated kernel ^^

Sakuu said:
Should be vastly improved since I've updated kernel ^^
Click to expand...
Click to collapse
OK, you got me hooked. Will test it over the weekend.
Thank you for the hard work that you put in!

Nice one Saku! I ran CherishOS on other devices, along with Spark it is the most balanced ROM - enough but not too many features, pretty stable, have been in active development for years. Hopefully no branding kerfuffle is going to happen like with Ricedroid. Will you build dirty-flashable updates for Cherish in the future?

k3lwin said:
Nice one Saku! I ran CherishOS on other devices, along with Spark it is the most balanced ROM - enough but not too many features, pretty stable, have been in active development for years. Hopefully no branding kerfuffle is going to happen like with Ricedroid. Will you build dirty-flashable updates for Cherish in the future?
Click to expand...
Click to collapse
Depends on what's updated in that specific build of course... But yeah most of the time you should be able to dirty flash any of my ROMs.

Sakuu said:
Depends on what's updated in that specific build of course... But yeah most of the time you should be able to dirty flash any of my ROMs.
Click to expand...
Click to collapse
It's more about whether you are going to keep building it when it gets updated. I'd prefer not having to do clean installs every couple of months to get latest security updates. Also, 4.7 was announced literally hours after you published 4.6.1

k3lwin said:
It's more about whether you are going to keep building it when it gets updated. I'd prefer not having to do clean installs every couple of months to get latest security updates. Also, 4.7 was announced literally hours after you published 4.6.1
Click to expand...
Click to collapse
I've already built it, I just need someone to test it ( and another secret rom )

Nice build, defo gonna try it. Does surround sound works? I also saw that the battery should be better than on stock, which is a plus

Johnnycazh said:
Nice build, defo gonna try it. Does surround sound works? I also saw that the battery should be better than on stock, which is a plus
Click to expand...
Click to collapse
Well we don't have the exact audio features stock has but we have a replacement for now which has surround sound and other stuff

@Sakuu eh, that's good. What about the camera? Do we have google camera, or? And also, does cherish offer Google Photos patch without root needed?(now i use pixelify, but i'd like to keep my phone unrooted

Johnnycazh said:
@Sakuu eh, that's good. What about the camera? Do we have google camera, or? And also, does cherish offer Google Photos patch without root needed?(now i use pixelify, but i'd like to keep my phone unrooted
Click to expand...
Click to collapse
It has all camera apps from stock preinstalled you can install gram if you want ofc, and yeah unlimited backup should work without root afaik.

@Sakuu cool cool. And, one last question... Do you guys have ota updates for this? or have to flash a zip everytime from my laptop

Johnnycazh said:
and, one last question... Do you guys have ota updates for this? or i have to flash a zip everytime from my laptop
Click to expand...
Click to collapse
No OTA is for official only, if someone wants to do that then yeah you could get OTA but for now every update you reboot into recovery and you sideload the new zip (and install magisk if you want)

Sakuu said:
No OTA is for official only, if someone wants to do that then yeah you could get OTA but for now every update you reboot into recovery and you sideload the new zip (and install magisk if you want)
Click to expand...
Click to collapse
(( but i dont lose anything when i update via twrp, right? Sorry for all these (stupid maybe) questions

Johnnycazh said:
(( but i dont lose anything when i update via twrp, right? Sorry for all these (stupid maybe) questions
Click to expand...
Click to collapse
As I said above, depends on what's actually being updated if it's a major upgrade like 13 > 14 clean flash is required or if hardware repo is updated (the stuff that lets you enable creator mode and mess with battery care) then you need to clean flash since XperiaParts will get all messed up...

Sakuu said:
As I said above, depends on what's actually being updated if it's a major upgrade like 13 > 14 clean flash is required or if hardware repo is updated (the stuff that lets you enable creator mode and mess with battery care) then you need to clean flash since XperiaParts will get all messed up...
Click to expand...
Click to collapse
eh, good. Now i understood. Thanks a lot gonna flash it, cuz i want better battery and performance

@Sakuu what about the resolution? is it still 4K, or i can change it(w/out root)?

Related

[ROM][8.1][OpenKirin's AOSP - Treble - Oreo MR1 for Honor View 10][Updated 24/02/18]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team OpenKirin presents AOSP Oreo 8.1 for Honor View 10.
It is based upon android-8.1_r14 branch and comes preshipped with a barebones GApps setup.
Current issues:
2G/3G network only show full strength
Wifi Display
QuickCharge/SuperCharge UI indicators missing
Installation
unlock bootloader & extract downloaded zip
flash system.img via fastboot
Code:
[I]command:[/I]
fastboot flash system system.img
do a factory reset via stock recovery and enjoy
Download
https://mega.nz/#!L85zXIbD!xFvraCLhmppx4st0EIjvI5WCaMlKjxO9caGrC3v2CWI
Credits
* @phhusson
* @LuK1337
* @OldDroid
* @surdu_petru
* @XePeleato
Special Thanks
* @svetius
XDA:DevDB Information
Treble AOSP Oreo MR1, ROM for the Honor View 10
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin-Treble
ROM OS Version: 8.x Oreo
Version Information
Status: Testing
Created 2018-02-23
Last Updated 2018-02-22
Reserved
Changelog
* v1 - initial version
* v2 - the cam update
added stock huawei camera
fixed apps not beeing able to read from external storage
add a security patch ui indicator for the oem base under system -> about phone in settings
Good to see lot of ROMS coming...
All these seems to have same bugs for now.
Is this camera same as stock app? If not, are all the features like portrait mode, pro mode works?
venreddy said:
Good to see lot of ROMS coming...
All these seems to have same bugs for now.
Is this camera same as stock app? If not, are all the features like portrait mode, pro mode works?
Click to expand...
Click to collapse
initial release doesn't have the stock cam, yet - thats comming in the next update.
Magisk 16.0 works just fine on this rom, safetynet passes and even my banking apps are working without detecting root
Regards
OldDroid said:
initial release doesn't have the stock cam, yet - thats comming in the next update.
Magisk 16.0 works just fine on this rom, safetynet passes and even my banking apps are working without detecting root
Regards
Click to expand...
Click to collapse
Good thanks.
Thanks Guys....I am using lineage ...was waiting for AOSP 8.1..going to flash it soon.:good:
Good job again.
Thanks for the rom. Just curious why the IMG size is almost double of AOSP rom ?
OldDroid said:
Magisk 16.0 works just fine on this rom, safetynet passes and even my banking apps are working without detecting root
Click to expand...
Click to collapse
I don't get safetynet pass. That's how I tried:
1. Wipe data/factory reset
2. Wipe cache
3. fastboot flash system system.img (this ROM here)
4. fastboot flash ramdisk BKL-L09_ramdisk.img
5. Boot Android
6. fastboot flash ramdisk patched_boot.img
7. Boot Android
8. Install Magisk Manager 5.6.1 -> safetynet fails, Banking apps refuse to start
Any idea?
Nexus lover said:
Apparently I'm not smart enough to get safetynet pass, with or without root.
That's how I tried:
1. Wipe data/factory reset
2. Wipe cache
3. fastboot flash system system.img (this ROM here)
4. Boot Android
5. flash ramdisk patched_boot.img
6. Boot Android
7. Install Magisk Manager 5.6.1 -> safetynet fails, Banking apps refuse to start
Any idea?
Click to expand...
Click to collapse
After you finish flashing the rom
1.Put the Magisk manager and ramdisk boot.img onto the storage of the phone .
2. Install the Magisk Manager.
3. Magisk Manager will prompt you to install the latest Magisk apk which is version 16.
4. Click install and patch boot image.
5. The manager will bring you to the file manager , and you search for the original ramdisk boot IMG. And click on it once.
6 .Wait for the manager to do the patching of boot.img and eventually a patched boot.img is formed .
7. Transfer the patched boot IMG to you ADB file on your computer.
8. Put your phone in fastboot mode and flash it.
9. Reboot and your phone is rooted.
Does the IR blaster now work on the Mate 10 (Pro) ? Apparently there were some issues reported in the previous version.
chen8894 said:
1...
9. Reboot and your phone is rooted.
Click to expand...
Click to collapse
Nobody said it's not rooted. The problem is it doesn't pass safetynet.
New update is up!
Changelog:
* added stock huawei camera
* fixed apps not beeing able to read from external storage
* add a security patch ui indicator for the oem base under system -> about phone in settings
Check OP for download link.
Regards
OldDroid said:
New update is up!
Changelog:
* added stock huawei camera
* fixed apps not beeing able to read from external storage
* add a security patch ui indicator for the oem base under system -> about phone in settings
Check OP for download link.
Regards
Click to expand...
Click to collapse
Great!!!!! Does all features of stock camera works?
Volte working or is Volte a generally problem of all Aosp Rom?
tasar said:
Volte working or is Volte a generally problem of all Aosp Rom?
Click to expand...
Click to collapse
If you need VoLTE you should use stock EMUI for moment. And yes, all custom ROMs have this issue ... no need to ask on each thread the same question !
When the issue will be fixed, it will be clearly stated in OP - so you don't need to ask every day if VoLTE was fixed or not
surdu_petru said:
If you need VoLTE you should use stock EMUI for moment. And yes, all custom ROMs have this issue ... no need to ask on each thread the same question !
When the issue will be fixed, it will be clearly stated in OP - so you don't need to ask every day if VoLTE was fixed or not
Click to expand...
Click to collapse
I don't see VoLTE issue has been mentioned in OP known issues section.
Also please let me know any other issues in this rom?
IR, fingerprint, face unlock, front/rear portrait mode, nfc, huawei share... Working or not?
Do you think desktop mode can be ported over for the mate 10/pro?
hands0m3 said:
Do you think desktop mode can be ported over for the mate 10/pro?
Click to expand...
Click to collapse
It definitely can be, but probably won't happen or at least not right now. We need to port EMUI framework and that requires a lot of work and I think that there are definitely other priorities first
OldDroid said:
New update is up!
Changelog:
* added stock huawei camera
* fixed apps not beeing able to read from external storage
* add a security patch ui indicator for the oem base under system -> about phone in settings
Check OP for download link.
Regards
Click to expand...
Click to collapse
Plz update for honor 8 pro too .. , is this v10 emui stock camera in this rom any difference from that u put in your honor 8 pro's rom stock camera ?

Development [ROM] [13] [UNOFFICIAL] [Creator Mode, Battery Care, HS] Spark OS 13.4

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SparkOS is an AOSP based ROM, packed with many features without sacrificing stability and performance.
In short a fully functional operating system as stable and customizable as it should be.
UNOFFICIAL Spark OS​
Code:
/* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Note: FLASH WITH A12 FW ONLY! DO NOT FLASH WITH A13 FW!​Credits to loipuru for the build.​​Notes​1. This ROM is, mainly for testing purposes only and may or may not contain unexpected bugs​2. You need to flash Stock Android 12 before flashing this ROM (61.1.X.X.XXX)​3. If you came from a SODP based ROM, you need to go back to official Android 12 firmware, and boot until you get to the Xperia Launcher​4. 120Hz & HS (renamed to Pause Charging) can be enabled from the QS Panel​5. Device may feel a little sluggish due to kernel still being WIP​6. SELinux is Enforcing​​What works?​• Wi-Fi
• Mobile Data (not on US Model)
• Bluetooth (BT Audio is dead, will be fixed in future builds)
• GPS
• LED (only while charging)
• Flashlight
• Fingerprint Sensor
• Sound
• Vibration
• 120Hz
• Battery Care
• HS Power Control
• Cameras
What's broken?​• Camera addons like Panorama for example, can't be installed by default, but you can install them if you flash the module provided below (Libs will be added by default in future builds so that the module won't be needed)
• Regular 120FPS doesn't work in Cinema Pro, only SlowMo 120FPS does
• SDCard may or may not work (e.g it asks you to format it)
• SIM isn't detected on xx62 model (US Variant)
• Bluetooth Audio is dead for now (Also will be fixed in newer builds, for now only Speaker/3.5mm works)
• Proximity sensor makes the device freeze, (e.g putting the phone to your ear in a call) this can be fixed by adding the "Sensors Off" QS Tile and then enabling it during a call
Settings > System > Developer options > Quick settings developer tiles > Sensors Off
Click to expand...
Click to collapse
Support group available on Telegram!
Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the links below)​Clean Flash:​
Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery
Factory Reset > Format data/factory reset
Click to expand...
Click to collapse
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
BUT If you want to flash Magisk go to
Advanced > Reboot to bootloader
Click to expand...
Click to collapse
Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot
Updating from a older build (Dirty Flash):​
Code:
adb reboot bootloader
fastboot reboot recovery
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk
Main Downloads:
ROM Download
Boot Download
Magisk Boot Download
Recovery Download (vendor_boot)
Extra Downloads:
Camera Apps & Addons Download
Module for Camera Addons Download
Sources:
ROM Source
Device Trees
Kernel Source
Build Author | Maintainers
loipuru
Sakuu
Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
Android Version: 13
Kernel Version: 5.4.219
Version Information
Status: Beta
SparkOS Version: 13.4
SELinux Status: Enforcing
Release Date: 29/01/2023
Last Updated: 14/02/2023
Screenshots:
Support group available on Telegram!
I faced this issue
How can I fix to install your ROM?
Thank you :">
season 8 said:
I faced this issue
How can I fix to install your ROM?
Thank you :">
Click to expand...
Click to collapse
You need to use the recovery provided by me for the ROM https://drive.google.com/file/d/1un0rpLZRxgRP9BeFJqRb9EdlwGbNJJOx/view?usp=sharing
Sakuu said:
You need to use the recovery provided by me for the ROM https://drive.google.com/file/d/1un0rpLZRxgRP9BeFJqRb9EdlwGbNJJOx/view?usp=sharing
Click to expand...
Click to collapse
Wait!!! I've used your recovery to flash ROM already
season 8 said:
Wait!!! I've used your recovery to flash ROM already
Click to expand...
Click to collapse
Then what are you trying to do with TWRP?
I try to flash your rom via adb sideload but I think I have a mistake somewhere @@
Hello, does this rom have "select" feature of pixel phones?
500vnd said:
Hello, does this rom have "select" feature of pixel phones?View attachment 5822755
Click to expand...
Click to collapse
You can install a Pixel launcher magisk module for that & the pixel launcher
Hello, does this ROM have Bluetooth HID support? Meaning I can use the phone as a keyboard/mouse or BT devices can control the music on the phone?
Thanks.
unicastbg said:
Hello, does this ROM have Bluetooth HID support? Meaning I can use the phone as a keyboard/mouse or BT devices can control the music on the phone?
Thanks.
Click to expand...
Click to collapse
Not sure about controllers but HID devices should work. (working on implementing controller support and better HID support by default)
Nice Work! Hope this project can continue to be maintained.
Thank you for your great work!
A few feedbacks after 1 week of using your ROM
Most features work very smoothly, can use Photo Pro, Cinema Pro, RAM uses less than Stock ROM
Bugs in my device
LED light only works when charging, not when there are missed notifications or missed calls
Bluetooth Audio does not work (a Bluetooth headset device can be connected to the phone but no sound, like the Sony SP800N)
Recommended for daily use? Yes, if you are not using a bluetooth headset

Development [ROM][UNOFFICIAL][pdx215][13] RisingOS Android Project v1.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RisingOS is An OpenSource Aftermarket Android Operating System that aims to deliver unique and refreshing android experience.
Unofficial RisingOS​
Code:
/* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Notes​
1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)
2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher
3. To fix the Globe with a Strikethrough issue go to info of the app which has the issue, go to​
Mobile data & Wi-Fi > Allow network access​
Click to expand...
Click to collapse
Support group available on Telegram!​
What works?​• Wi-Fi
• Wi-Fi 6e
• Mobile Data
• Bluetooth
• SDCard
• Cameras
• GPS
• LED
• Flashlight
• Fingerprint Sensor
• Battery Health Statistics
• Pause Charging
• Battery Care
• Sound
• Vibration
• Dolby Atmos
• 360 Reality Audio Lite
• Creator Mode
• HDR10+
• 120Hz
• 240Hz Touch Sampling
What's broken?​• LDAC
• Not all apps are installed by default, read Post-Install Instructions for more context
• You tell me
Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the links below)​Clean Flash:​
Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery
Factory Reset > Format data/factory reset
Click to expand...
Click to collapse
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
BUT If you want to flash Magisk go to
Advanced > Reboot to bootloader
Click to expand...
Click to collapse
Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot
Updating from a older build (Dirty Flash):​
Code:
adb reboot bootloader
fastboot reboot recovery
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk
Post-Install: (DO NOT SKIP THIS STEP OTHERWISE YOU WILL BE MISSING ESSENTIAL APPS FOR THE CAMERA & XPERIAPARTS)​
Due to some weird ROM bug not all apps are installed by default, head over to the Download folder and go to the Post-Install folder and download all the APKs then install them manually, this step is HIGHLY recommended.
For the Camera button I suggest Installing Key Mapper and then configuring it as in this and this picture. (Screen off button detection is only available for rooted users)
Downloads:
Folder Download
Sources:
RisingOS Source
Device Tree
Kernel Source
Build Author | Maintainer
Saku
Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
Android Version: 13
Kernel Version: 5.4.233
Version Information
Status: Stable
RisingOS Version: 1.1
SELinux Status: Enforcing
Release Date: 24/02/2023
Last Updated: 15/05/2023
Changelog 1 | RiceDroid 10.2 | CORE | COMMUNITY
• Initial Release
Click to expand...
Click to collapse
Changelog 2 | RiceDroid 10.2 | CORE | COMMUNITY
CLEAN FLASH REQUIRED!
• Fixed Pause Charging and Battery Care
• Improved general smoothness of the device
Click to expand...
Click to collapse
Changelog 3 | RisingOS 1.1 | CORE | COMMUNITY
CLEAN FLASH REQUIRED!
• Source updated RiceDroid 10.2 (Feburary 2023 Security Patch) -> RisingOS 1.1 (May 2023 Security Patch)
• Kernel upstreamed to 5.4.233
• Kernel Updated Krispy-v1.1 -> Krispy-v1.2.2
• Overall power consumption MASSIVELY reduced
• Jitter, RT and Total Duration have been massively improved as well
• Fixed high framerate recording (120FPS) in Cinema/Videography Pro
• Fixed side fingerprint sensor location (while unlocking/AOD)
• Add another refresh rate switch to display settings
• "Processor" string in About Device now displays correct SOC name
• Unlock Animation Smoothness Improved
• Enable 6GHz (Wi-Fi 6E) Support
• Fixed High Brightness on AOD
• Fixed some LED-related bugs
• Added XperiaParts Menu, which contains alot of Xperia goodies (Settings > System > XperiaParts)
• Add support for HDR10+
• Added Dolby Atmos
• Added 360RA Lite & Some other Stock Goodies (View Post-Install Section)
Click to expand...
Click to collapse
Changelog 4 | RisingOS 1.1 | CORE | COMMUNITY
CLEAN FLASH OPTIONAL!
• Fixed Assistant Key Remapping
• Disabled some useless logging on userdebug builds
• Tweaked some props for better performance
• Updated all apps to latest 1 V APKs (YOU MIGHT NEED TO CLEAR DATA OF THE APPS ON A DIRTY FLASH!)
• Added Portrait Mode in Videography & Photo Pro
• Fixed HDR [email protected] on Videography Pro
• Use the Correct Battery Capacity (4500mAh, as per SODP)
Click to expand...
Click to collapse
DOWNLOAD LINK IN THE ORIGINAL POST
Exciting!Can't wait to experience
BTW,Spark os still aliving?
RiverDogs said:
BTW,Spark os still aliving?
Click to expand...
Click to collapse
Not being updated for now, plus sparkOS is based on 12 trees so it would be better to use riceDroid or LineageOS
Any screenshots?
Sakuma_Eitarou said:
Any screenshots?
Click to expand...
Click to collapse
I'll add some later tonight, working on fixing some bugs at the moment
I will send screenshots when I get home, was busy at work and forgot to sign Into telegram before leaving for work....sorry Saku...
Sakuma_Eitarou said:
Any screenshots?
Click to expand...
Click to collapse
Yeah just uploaded them alongside a new build that should be daily drivable!
Sakuu said:
Yeah just uploaded them alongside a new build that should be daily drivable!
Click to expand...
Click to collapse
what about bt sound and camera?
Sakuma_Eitarou said:
what about bt sound and camera?
Click to expand...
Click to collapse
BT Audio works and cameras can be installed using the magisk module provided (same as LineageOS)
is it possible to use the ricedroid source with no google apps?
Amusing3-Bolster-Stitch said:
is it possible to use the ricedroid source with no google apps?
Click to expand...
Click to collapse
I mean yeah if you do a build without GApps, sure but my builds will always have GApps since I will enable EROFS support somewhere down the line and GApps packages won't be able to be flashed anymore at that point
Sakuu said:
I mean yeah if you do a build without GApps, sure but my builds will always have GApps since I will enable EROFS support somewhere down the line and GApps packages won't be able to be flashed anymore at that point
Click to expand...
Click to collapse
sure, that's fair. well otherwise, it's a great build, thanks for making it. i will just debloat the few google pieces and see if i can replace with microg
Sakuu said:
View attachment 5845871
RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
Unofficial riceDroid​
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Notes​1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)​2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher​3. 120Hz & HS (Renamed to Pause Charging) can be enabled from the QS Panel​4. FYI Using the "Show refresh rate" option in the Developer Settings while playing a 4K60FPS HDR video will cause the phone to become extremely buggy so do NOT do this! (A reboot will solve this but still DON'T do it)
5. Camera addons can't be installed by default, but you can install them if you flash the module provided at the bottom of the post​Support group available on Telegram!​
What works?​• Wi-Fi
• Mobile Data
• Bluetooth
• SDCard
• Cameras
• GPS
• LED
• Flashlight
• Fingerprint Sensor
• 4K Resolution Switch
• Battery Health Statistics
• Pause Charging
• Battery Care
• Sound
• Vibration
• 120Hz
• 240Hz Touch Sampling
What's broken?​• Smooth Display (Just turn it off as soon as you boot into the OS since functionally, it does nothing)
• 120Hz Recording on Cinema/Video Pro (Fixed DT-side needs new build to be pushed)
• You tell me
Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the links below)​Clean Flash:​
Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery
Code:
adb sideload <rom.zip>
BUT If you want to flash Magisk go to
Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot
Updating from a older build (Dirty Flash):​
Code:
adb reboot bootloader
fastboot reboot recovery
Code:
adb sideload <rom.zip>
If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk
Main Downloads:
ROM Download
Boot Download
Magisk Boot Download
Recovery Download (vendor_boot)
Extra Downloads:
Camera Apps & Addons Download
Module for Camera Addons Download
Sources:
riceDroid Source
Device Trees
Kernel Source
Build Author | Maintainer
Saku
Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
ROM OS Version: 13
Kernel Version: 5.4.219
Version Information
Status: Stable
riceDroid Version: 10.2
SELinux Status: Enforcing
Release Date: 24/02/2023
Last Updated: 28/02/2023
Screenshots:
Click to expand...
Click to collapse
Could you please provide more information on how to install the camera. Thanks.
[email protected] said:
Could you please provide more information on how to install the camera. Thanks.
Click to expand...
Click to collapse
You'll need to flash magisk, then you install the module 2nd link from extra downloads, reboot and then you install the photo and video apps from the 1st zip downloaded from extra downloads.
Hi Sakuu, nice ROM. Something I was waiting for.
Sadly it seems like I have no phone number, but I do have LTE.
I did have some issues with not being able to connect if the modem blobs were invalid, but I've yet to see this problem. Any ideas?
Edit: I flashed stock A13 back and I still have no phone number. I don't think this ROM is at fault.
Edit2: Well this is embarrassing. I put in my work SIM and that one worked immediately. I think my SIM card just offed itself, very unfortunate timing.
UsernameNotRecognized said:
Hi Sakuu, nice ROM. Something I was waiting for.
Sadly it seems like I have no phone number, but I do have LTE.
I did have some issues with not being able to connect if the modem blobs were invalid, but I've yet to see this problem. Any ideas?
Edit: I flashed stock A13 back and I still have no phone number. I don't think this ROM is at fault.
Edit2: Well this is embarrassing. I put in my work SIM and that one worked immediately. I think my SIM card just offed itself, very unfortunate timing.
Click to expand...
Click to collapse
I had some issues with the SIM card too but just changing the APN fixed it, also with the phone number I think it pulls it from your Google account or something? But you shouldn't have any issues calling or stuff like that. It just doesn't show up in that specific page, that's all. I've also had my SIM die too it was very old and scratched so yeah at that point they need to be replaced.
Sakuu said:
I had some issues with the SIM card too but just changing the APN fixed it, also with the phone number I think it pulls it from your Google account or something? But you shouldn't have any issues calling or stuff like that. It just doesn't show up in that specific page, that's all.
Click to expand...
Click to collapse
Well, that's the problem. Calling and getting called was fine, but SMS was broken. Bit of an issue with 2FA and setting up whatsapp. It randomly "fixed" itself some time later but it still says unknown number.
Experience so far is a bit all over the place.
The great things:
The amount of customizability is amazing, so many things I can change to what I want without having to resort to lsposed and magisk modules. Especially button control was an absolute pain in the ass to setup on the stock rom.
Having magisk boot images makes life a lot easier.
Finally a toggle between "sane" and native res.
Extensive power menu is nice
Did I mention it looks great?
Very clean ROM! But I think leaving out a browser is maybe a bit too clean :>
But some things are not great...
Lots of slowdowns in the ui. It is very clear that the phone is not outputting 120fps at times.
Very poor battery life compared to A12 stock (with root and some mods, but nothing power related)
Missing fingerprint rejection. Trust me, if I lock the phone with the button I do not want to unlock the phone with 1 microsecond.
Device is a bit too trigger-happy waking up. I have the device laying next to my on my desk on the wireless charger and it seems to trigger for no reason.
I'll be using it a bit more and share some of my experiences, but so far it looks very serviceable, a lot better than some GSI roms definitely.
Regarding power, not the first time on new boot battery life was poor. I'll be doing some testing and tweaking the settings to see if it improves with some settings (or by itself).
UsernameNotRecognized said:
Well, that's the problem. Calling and getting called was fine, but SMS was broken. Bit of an issue with 2FA and setting up whatsapp. It randomly "fixed" itself some time later but it still says unknown number.
Experience so far is a bit all over the place.
The great things:
The amount of customizability is amazing, so many things I can change to what I want without having to resort to lsposed and magisk modules. Especially button control was an absolute pain in the ass to setup on the stock rom.
Having magisk boot images makes life a lot easier.
Finally a toggle between "sane" and native res.
Extensive power menu is nice
Did I mention it looks great?
Very clean ROM! But I think leaving out a browser is maybe a bit too clean :>
But some things are not great...
Lots of slowdowns in the ui. It is very clear that the phone is not outputting 120fps at times.
Very poor battery life compared to A12 stock (with root and some mods, but nothing power related)
Missing fingerprint rejection. Trust me, if I lock the phone with the button I do not want to unlock the phone with 1 microsecond.
Device is a bit too trigger-happy waking up. I have the device laying next to my on my desk on the wireless charger and it seems to trigger for no reason.
I'll be using it a bit more and share some of my experiences, but so far it looks very serviceable, a lot better than some GSI roms definitely.
Regarding power, not the first time on new boot battery life was poor. I'll be doing some testing and tweaking the settings to see if it improves with some settings (or by itself).
Click to expand...
Click to collapse
Regarding the browser, Play Store and GMS are installed by default so the user can install whichever browser he/she wants without forcibly installing Chrome as a system app and then having to disable it if they don't want it. Also about the fingerprint vibration and the device waking up, in case of the fingerprint I think there's a option in either AOSP mods or somewhere in the settings to disable it while the screen is off and for the screen waking up randomly, you can just disable waking the display when it's plugged in under the "Display" option.
Performance and battery life is a bit hit or miss right now, yes the kernel needs some work but I'd need pretty active testers to test new kernel images for me, kinda like how Freak07 does it. And after that battery life should be massively improved and the heat reduced too. And ofc that kernel will all the changes will ship with this/future ROMs going forward.

Development [ROM][UNOFFICIAL][pdx215][13] BananaDroid

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BananaDroid is an AOSP based ROM, with smooth fluidity,performance and customization
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Unofficial BananaDroid​
Code:
/* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​Notes​1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)​2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher​Support group available on Telegram!​
What works?​• Wi-Fi
• Wi-Fi 6e
• Mobile Data
• Bluetooth
• SDCard
• Cameras
• GPS
• LED
• Flashlight
• Fingerprint Sensor
• Battery Health Statistics
• Pause Charging
• Battery Care
• Sound
• Vibration
• Dolby Atmos
• 360 Reality Audio Lite
• 4K Resolution Switch
• Creator Mode
• HDR10+
• 120Hz
• 240Hz Touch Sampling
What's broken?​• LDAC
• You tell me
Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the link below)​Clean Flash:​
Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery
Factory Reset > Format data/factory reset
Click to expand...
Click to collapse
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
BUT If you want to flash Magisk go to
Advanced > Reboot to bootloader
Click to expand...
Click to collapse
Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot
Updating from a older build (Dirty Flash):​
Code:
adb reboot bootloader
fastboot reboot recovery
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk
Download:
Folder Download
Sources:
BananaDroid Source
Device Tree
Kernel Source
Build Author | Maintainer
Saku
Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
Android Version: 13
Kernel Version: 5.4.233
Version Information
Status: Stable
BananaDroid Version: Tanduk
SELinux Status: Enforcing
Release Date: 17/04/2023
Last Updated: 25/04/2023
Update 1
• Dropped Dolby AC4 Codec (Fixes TIDAL loading infinitely on Dolby Atmos songs)
• Smoothness has been improved on the 25.04.2023 build compared to the 17.04.2023 build
• Switched to AOSP SurfaceFlinger
DOWNLOAD LINK IN THE ORIGINAL POST
So many roms to test, so little time.
Anyway, thank you very much for the effort!
Awesome work! Looks more finished.
One moment. As riceDroid if you wanted to work best app to record video mcpro24fps you should change model in /product/etc/build.prop to "ro.product.product.model=XQ-BC72"
DIVAIDEX said:
Awesome work! Looks more finished.
One moment. As riceDroid if you wanted to work best app to record video mcpro24fps you should change model in /product/etc/build.prop to "ro.product.product.model=XQ-BC72"
Click to expand...
Click to collapse
Nah cherishOS and BananaDroid already have video,cinema and photo pro also changing the model will mess alot of stuff up, and I just forced ota assert for all models if you're coming from stock or another custom rom
How's the audio now, Sakuu? Any other improvements?
Johnnycazh said:
How's the audio now, Sakuu? Any other improvements?
Click to expand...
Click to collapse
I mean, Dolby? Otherwise nah
imma try it now, and tell if i find any bugs
Johnnycazh said:
imma try it now, and tell if i find any bugs
Click to expand...
Click to collapse
Also have a build of another rom with a Dolby bug fixes (which made tidal and apple music keep loading forever with it) but need someone to test it...
Sakuu said:
Also have a build of another rom with a Dolby bug fixes (which made tidal and apple music keep loading forever with it) but need someone to test it...
Click to expand...
Click to collapse
what rom? Cherish with audio fix? I could try it, but idk what to test, maybe you could tell me
Johnnycazh said:
what rom? Cherish with audio fix? I could try it, but idk what to test, maybe you could tell me
Click to expand...
Click to collapse
Nope risingOS clean build too, Banana is dirty so this should have wayy better performance
Sakuu said:
Nope risingOS clean build too, Banana is dirty so this should have wayy better performance
Click to expand...
Click to collapse
eh, i understand
The audio on this one is purely amazing! Highly recommend it, even if it's a bit buggy. Great job, Sakuu!
Sakuu said:
You created quite good ROM but what the reason to chnge the model? mcpro24fps more flexible to record video, you can even switch modules on fly, change birate, and so on... And most usefull option is disable noise suppression, is the best thing to improve quality.
Click to expand...
Click to collapse
You created quite good ROM but what the reason to change the model? mcpro24fps more flexible to record video, you can even switch modules on fly, change birate, and so on... And most usefull option is disable noise suppression, is the best thing to improve quality.
Also Freeform (floating app) is not working((( plz fix it!
When im tryng to connect to another phone to internet through Bluetooth in tile in status the phone completely stuck.
Flashed this rom on my xperia, so far so good, i appreciate the effort and work you've done, keep p the great work mate.
Johnnycazh said:
The audio on this one is purely amazing! Highly recommend it, even if it's a bit buggy. Great job, Sakuu!
Click to expand...
Click to collapse
Is this Headphones or Bluetooth?
DrDrag0n said:
Is this Headphones or Bluetooth?
Click to expand...
Click to collapse
headphones, bt and speakers. It really is almost as on stock. Very good, and u have kind of an equalizer in the dolby app. Nice
Johnnycazh said:
headphones, bt and speakers. It really is almost as on stock. Very good, and u have kind of an equalizer in the dolby app. Nice
Click to expand...
Click to collapse
Thanks for the reply.
what bugs have you noticed so far and do the stock camera/video apps work fine?
DrDrag0n said:
Thanks for the reply.
what bugs have you noticed so far and do the stock camera/video apps work fine?
Click to expand...
Click to collapse
None or they're too small to be noticed and all camera apps are preinstalled by default like on stock.
DrDrag0n said:
Thanks for the reply.
what bugs have you noticed so far and do the stock camera/video apps work fine?
Click to expand...
Click to collapse
yep, everything works fine. Sometimes, prolly bc of my high usage, when i pass the screen lock, it goes back to lock screen, so you basically have to introduce the pin/face id two times. But this happens rarely

Development [ROM][UNOFFICIAL][pdx215][13] AlphaDroid 1.5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AlphaDroid is a custom ROM based on crDroid, with a new look and some extra features and optimizations.
Unofficial AlphaDroid​
Code:
/* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​Notes​1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)​2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher​Support group available on Telegram!​
What works?​• Wi-Fi
• Wi-Fi 6e
• Mobile Data
• Bluetooth
• SDCard
• Cameras
• GPS
• LED (Only works for Notifications)
• Flashlight
• Fingerprint Sensor
• Battery Health Statistics
• Pause Charging
• Battery Care
• Sound
• Vibration
• Dolby Atmos
• 360 Reality Audio Lite
• Creator Mode
• HDR10+
• 120Hz
• 240Hz Touch Sampling
What's broken?​• LDAC
• You tell me
Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the link below)​Clean Flash:​
Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery
Factory Reset > Format data/factory reset
Click to expand...
Click to collapse
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
BUT If you want to flash Magisk go to
Advanced > Reboot to bootloader
Click to expand...
Click to collapse
Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot
Updating from a older build (Dirty Flash):​
Code:
adb reboot bootloader
fastboot reboot recovery
Apply update > Apply update from ADB
Click to expand...
Click to collapse
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
Click to expand...
Click to collapse
If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk
Post-Install:​Install KeyMapper (from the Download Folder) and then map the Shutter button and make sure to add the Constraint that Photography Pro is NOT in the foreground
If the animations are too fast for your liking go to
Settings > System > Developer Options and set the all Animation Scale options to 1.0
Click to expand...
Click to collapse
Download:
Folder Download
Sources:
AlphaDroid Source
Device Tree
Kernel Source
Build Author | Maintainer
Saku
Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
Android Version: 13
Kernel Version: 5.4.233
Version Information
Status: Stable
AlphaDroid Version: 1.5
SELinux Status: Enforcing
Release Date: 29/04/2023
Last Updated: 02/05/2023
UPDATE 1
- Updated to AlphaDroid 1.5
- Kernel Updated Krispy-v1.2.1 -> Krispy-v1.2.2
- Overall power consumption reduced
- Jitter,RT and Total Duration have been massively improved
Update is Dirty-Flashable
how does this ROM differ from bananadroid?
Sakuma_Eitarou said:
how does this ROM differ from bananadroid?
Click to expand...
Click to collapse
smoother and has the newest commits (which fixes stuff like AOD being at 120hz prior to locking the screen)
Does this rom have dynamic vibration ?
Any screenshots hoe it looks and what we can get ?
Pandemic said:
Any screenshots hoe it looks and what we can get ?
Click to expand...
Click to collapse
Some pretty in-depth customization, also battery life is greatly improved and the device barely heats up compared to stock
Sakuu said:
Some pretty in-depth customization, also battery life is greatly improved and the device barely heats up compared to stock
Click to expand...
Click to collapse
Actual improvements in battery life? Gotta try this to believe it! Battery life sucks on stock, and I've underclocked the GPU to 540mhz and it's still super hot in the hand
Edit: ROM is so smooth, highly recommend
Edit2: only issue I have is keyboard is much closer to the bottom of the screen now which is slightly less comfortable to use than stock
edit3: server class wifi works on this ROM which is a massive plus for my educational facility
4g and 5g reception have both been boosted for me as well in my workplace where i would not have 5g or 4g, only gprs
Sakuu said:
Some pretty in-depth customization, also battery life is greatly improved and the device barely heats up compared to stock
Click to expand...
Click to collapse
Looks good, but i don't see assistant button settings, an how works camera button?
Sakuma_Eitarou said:
Looks good, but i don't see assistant button settings, an how works camera button?
Click to expand...
Click to collapse
You have to use the key mapper app in the same download folder
Sakuma_Eitarou said:
Looks good, but i don't see assistant button settings, an how works camera button?
Click to expand...
Click to collapse
G assistant button works. Buuut, Ok Google doesnt work, at least not for me. The button works perfectly, but not the hands-free function. Rom side, ig
Johnnycazh said:
G assistant button works. Buuut, Ok Google doesnt work, at least not for me. The button works perfectly, but not the hands-free function. Rom side, ig
Click to expand...
Click to collapse
G assistant is unusable button, I map on this button screenshot and torchlight
Sakuma_Eitarou said:
G assistant is unusable button, I map on this button screenshot and torchlight
Click to expand...
Click to collapse
what? when i press the g assistant button, i get the google assistant. If u dont have google then maybe it wont work. But for me it works
Johnnycazh said:
what? when i press the g assistant button, i get the google assistant. If u dont have google then maybe it wont work. But for me it works
Click to expand...
Click to collapse
I use this
Sakuma_Eitarou said:
G assistant is unusable button, I map on this button screenshot and torchlight
Click to expand...
Click to collapse
Install the google app and change the default assistant to "Google" then it becomes available.
Sakuu said:
Install the google app and change the default assistant to "Google" then it becomes available.
Click to expand...
Click to collapse
No, I don't want. For me enough say "Ok, Google". I prefer another functions on this button. In stock this button is s**t
ROM is so smooth and good battery life. But Android Auto protocol is missing, how can I fix that? Thanks!
If anyone has issue with android auto , uninstall android auto if you have it installed as a user app(android auto wont work unless is a system app) and flash this in recovery NikGapps-Addon-13-AndroidAuto-20230418-signed.zip , this is because the gapps in the rom are "core" ones, these have the bare minimum gapps framework for gms to work.
rafyvitto said:
If anyone has issue with android auto , uninstall android auto if you have it installed as a user app(android auto wont work unless is a system app) and flash this in recovery NikGapps-Addon-13-AndroidAuto-20230418-signed.zip , this is because the gapps in the rom are "core" ones, these have the bare minimum gapps framework for gms to work.
Click to expand...
Click to collapse
Thanks! But the addon cannot be flashed with this ROM's recovery. The link to TWRP for 1 III is removed, so, is there any way to flash this?
Does the Sony stock camera app work? And/or GCam?
Plans to keep this ROM updated and probably becoming official?
I really like the customization screenshots, I'm almost hooked

Categories

Resources