Not enough memory,Installation aborted - HTC Oxygen

Hi!
I've got some problems with my HTC S310 / Oxygen.
My system info shows:
Total: 59.50MB
Storage: 15.94MB
Used: 12.37MB#Free: 3.57MB
Memory for Programms: 43.56MB
Used: 23.64MB
Free 19.91MB
I was able to install agendaone without any problems, but whenever i try to install ANY other aplication, the installation of the .cab stops shortly befor finished and the info-screens show : Installation not succesfull: not enough memory! The applications I've tried to install would need about 600kb to 1,2MB.
Any Idea?

youonly got 3bm of ram
consider that the cas use 600 kb and it uncompress file (perhaps about 1.2mb ) and try to copy it (so another 1.2mb for exemple) so you should install the cab on your SD!

Related

Change pp for WM6 ROM 6.0.0.0 using ActiveSync

no need to hard reset or install new Rom, just soft rest
please use this at your own risk, don't do it unless you know what it is
in shortcut, this will change the memory for you like this:
4mb pool.bat will make the total memory 52mb
6mb pool.bat will make the total memory 50mb I recomend it.
8mb pool.bat will make the total memory 48mb
10mb pool.bat will make the total memory 46mb thanks inteks
12mb pool.bat will make the total memory 44mb the official.
it will take only few seconds, 1 or 2 seconds
only now softreset no need to hardrest or format
there is installrapi.bat but I think we don't need it in WM6, hope some one confirm, and you can install it manualy, if needed only once.
you may backup the old byte by backup.bat and restore by restore.bat
please don't blame me if you do anything wrong
and just wish me best of luck if this works for you
copyright to me
thanks Gullum for testing always the first one and his great job here and your links
Chopin said:
no need to hard reset or install new Rom, just soft rest
please use this at your own risk, don't do it unless you know what it is
in shortcut, this will change the memory for you like this:
4mb pool.bat will make the total memory 52mb
6mb pool.bat will make the total memory 50mb I recomend it.
8mb pool.bat will make the total memory 48mb
10mb pool.bat will make the total memory 46mb thanks inteks
12mb pool.bat will make the total memory 44mb the official.
it will take only few seconds, 1 or 2 seconds
only now softreset no need to hardrest or format
there is installrapi.bat but I think we don't need it in WM6, hope some one confirm, and you can install it manualy, if needed only once.
you may backup the old byte by backup.bat and restore by restore.bat
please don't blame me if you do anything wrong
and just wish me best of luck if this works for you
copyright to me
thanks Gullum for testing always the first one and his great job here and your links
Click to expand...
Click to collapse
first....this is the great tool man...thanks
does the tool work on trinity....?
thanks chop...
please give me the link of the Room
Hey Buddy
Thanks a lot cheers
Hey Mods
Could you pls make this sticky as well, maybe you can linkup both versions (for Rom v4.0.0.0 & v6.0.0.0) in the same thread..
Storage to program!!
Thanks pal, but I need a lot of memory for my 800+ business contacts; any idea how to decrease the Storage memory in favor of programs?
I'm working in big storage for WM5 ( my ROM aku 2.2) but I can't do it tell now
when I have time, I'll work in wm6 maybe it will work I don't have time as usal these days
noob question, can u tell me the purpose of changing pp?
thanks Chopin....
please read the first post, this what you can see only as a noobie
it will change the page pool, that area will be taken from the memory to cash the modules from the ROM (read only memory) or we chall call it EPROM as it is EPROM? in this case only os.nb
this is in an easy way
hope it helped
By changing pagepool size, will there be any effect to battery drain?
no, I don't think that there is any effect
File is corrupt............
plz reupload this file in rar format
------------------------------
sorry my mistake
file is good
but i couldn't open it with winzip
no problem with winrar

Navigon MN6 & WM6

I've been trying MN6 on WM5 and WM6 and I've done several cronos (boot time) with and without overclock, the results are:
MN6 on WM5: 45 secs
MN6 on WM6 without overclock: 1:30 secs (min.)
MN6 on WM with 244mhz overclock: 1:23 (min)
Free mem on WM5: around 24mb
Free mem on Wm6: around 21-22mb
Why this difference between these times? why on WM6 MN6 get the double of time to boot?
My rom is Prophet Touch 7
it suppose to be faster in WM6 as microsoft release notes
like in PC, when jumping from Windows me to XP to vista, the PC will be slower.
the programs run slower cause the windows has more functions in the core, I'm sure it has more functions, so if the program may need some times to load the system files and run into memory,
I think the program now searchs in more memory (system files loaded in momery and ROM)
if you try 6 mb pp it will release more program memory but it will be slower to read the ROM, but 4.5 mb pp size is enough, so 6mb is great
Chopin said:
it suppose to be faster in WM6 as microsoft release notes
like in PC, when jumping from Windows me to XP to vista, the PC will be slower.
the programs run slower cause the windows has more functions in the core, I'm sure it has more functions, so if the program may need some times to load the system files and run into memory,
I think the program now searchs in more memory (system files loaded in momery and ROM)
if you try 6 mb pp it will release more program memory but it will be slower to read the ROM, but 4.5 mb pp size is enough, so 6mb is great
Click to expand...
Click to collapse
Ok, I can understand, but: why the double!! hehehe it's too much difference. I've done the try with 12mb and with 6mb of pagepool (zei v2 and touch 7) with similar results...

Transferring ROM memory to Device ???

Hello,
I am trying to install TomTom Navigator to my Himalaya. I can do it but i have just found (i'll not go into too much detail!) that in order for it to use 7 digit UK postcodes, the file full of postcodes needs to be put in the main program files memory on the device and there is no room left there !!!!. There is 45mb of ROM left, so i want to transfer about 5mb from the ROM to the device so that i can dump a 9mb file into the "program files" on the device.
Is this possible ? and if so, how ?
Best Regards,
Andrew

Prophet ROM CE OS 5.2.20924 Clean(Build 20924.1.5.0 PV )

Prophet ROM CE OS 5.2.20924 Clean(Build 20924.1.5.0 PV )
Anybody want to try?
This ROM originally cooked by Lamson (PDAVIET), cleaned by me, contain only Office (minus Onenotes) and UC ready.
Thank's to Lamson (PDAVIET) for the creative ROM production
Download link:
Mediafire
Mirror link"
Down (looking for another)
Features of this rom and Memory usage stats please?
THX DEAR legedug
rahulganatra said:
Features of this rom and Memory usage stats please?
Click to expand...
Click to collapse
Its clean my dear friend.
Only Office (minus onenote) and basic ppc soft such as calculator, networkwizard, and sim manager.
Why is this ROM consuming lot of memory then. only 23.6 mb free RAM ? Storage is quite impressive but if u get around 30 MB free then a clean rom is worth it, you can load a shell on top which on an avg will consume between 3-6MB
rahulganatra said:
Why is this ROM consuming lot of memory then. only 23.6 mb free RAM ? Storage is quite impressive but if u get around 30 MB free then a clean rom is worth it, you can load a shell on top which on an avg will consume between 3-6MB
Click to expand...
Click to collapse
Its because of the page pool and usually for the first loading time, it use RAM, consider freeing the RAM after.
Mine, after installing 12 softs on main, 8 softs on extended, and 28 soft on storage card the sorage remain 27.72MB and program 13.83MB.
another reason for small amount of ram is that lamson's roms are set to have 4mb system cache that can be change under advanced config or any registry manager
i use 1 mb cache and 4mb pp and in any rom thats is kinda clean, can get at least 30 mb free ram
HI Legedug:
Would you like to upload a link in RADPIDSHARE using free account,cz I can not connect mediafire here in PEKING china.Thanks in advance...
legedug said:
Prophet ROM CE OS 5.2.20924 Clean(Build 20924.1.5.0 PV )
Anybody want to try?
This ROM originally cooked by Lamson (PDAVIET), cleaned by me, contain only Office (minus Onenotes) and UC ready.
Thank's to Lamson (PDAVIET) for the creative ROM production
Download link:
Mediafire
Click to expand...
Click to collapse
Mirror link:
Rapidshare
Thanks,download has been well done
legedug said:
Mirror link:
Rapidshare
Click to expand...
Click to collapse
legedug said:
Mirror link:
Rapidshare
Click to expand...
Click to collapse
Hi, the following error occur while downloading from Rapidshare:
Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Hi,
Thanks for this new ROM.
How can I put (or restore?) original green Windows 6.1 theme and backgound?
For my job , I need sometimes to make screen shots and it should be as close as a supposed original ROM.
Tia
C.
legedug said:
Its because of the page pool and usually for the first loading time, it use RAM, consider freeing the RAM after.
Mine, after installing 12 softs on main, 8 softs on extended, and 28 soft on storage card the sorage remain 27.72MB and program 13.83MB.
Click to expand...
Click to collapse
oh my GOD
another very clean and very new build rom
i'm downloading it now
i was just getting used to your 20759 claen rom after 20 days with no problem
but i have one question :
how do you backup or restore all your programs on a new rom ?
do you reinstall all of them one by one ?
or you use soem software for that.
i tried spb backup but long time ago but was no good
i need somthing to only restore the installed programs and their settings in the registry.
thanks a lot
jullien said:
Hi,
Thanks for this new ROM.
How can I put (or restore?) original green Windows 6.1 theme and backgound?
For my job , I need sometimes to make screen shots and it should be as close as a supposed original ROM.
Tia
C.
Click to expand...
Click to collapse
You mean Windows mobile green theme?
Just put this file/tsk (extract before) on windows folder, then change the theme on "settings, today, theme" with that theme.
ahwaztaxi said:
oh my GOD
but i have one question :
how do you backup or restore all your programs on a new rom ?
do you reinstall all of them one by one ?
or you use soem software for that.
i tried spb backup but long time ago but was no good
i need somthing to only restore the installed programs and their settings in the registry.
thanks a lot
Click to expand...
Click to collapse
Yup, that is my problem also.
But I use one soft from this forum to install apps, its called Cabbatchinstall.
It can generate a list of softs on storage card and install one by one by its self (or skip it).
The UC only install on main memory but this soft can install on storage card or even extended_rom.
Here is the softs.
smarvest said:
Hi, the following error occur while downloading from Rapidshare:
Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Click to expand...
Click to collapse
Hemmm...
Stange behave for Rapid.
I did not do anything, but I also received the same error (even I, is the uploader).
So for momentary, use the mediafire instead. I 'll try to upload to another.
legedug said:
Yup, that is my problem also.
But I use one soft from this forum to install apps, its called Cabbatchinstall.
It can generate a list of softs on storage card and install one by one by its self (or skip it).
The UC only install on main memory but this soft can install on storage card or even extended_rom.
Here is the softs.
Click to expand...
Click to collapse
A very useful program, Bro. Thank you.
legedug said:
You mean Windows mobile green theme?
Just put this file/tsk (extract before) on windows folder, then change the theme on "settings, today, theme" with that theme.
Click to expand...
Click to collapse
Thanks! I'll try it. I've try another one, the main screen was green but other programs (for example calc) was still back.
If I rememeber well, your previous ROM had geen call win green theme was selected. In the mean time, I've found BlackDiamond theme that looks as an orginal one. It's also Ok for me.
I'm really happy with your good ROMs
C.
Does it support Asia area?
the rom was maybe lose more power?
when I sleep about 7 hours.... it lose amous 20% of power?

[Q] Back from Android Energy™ (NAND) To Energy™ WinMobile 6.5

Please, please help me!
I badly need step by step guide how to do this.
Back from Android Energy™ (NAND) To Energy™ WinMobile 6.5
enter bootloader
connect usb
flash energy winmo rom over usb
or if that doesnt work (not sure on whether a cooked rom removes magldr)
enter bootloader
flash a stock rom over usb
enter bootloader (no need to let the stock rom boot)
flash energy winmo rom over usb
I did it! Thank you my friend
Total storage - 202.39 mb
Used storage - 65.49 mb
Free storage - 136.90 mb
Total program - 453.30 mb
Used program - 176.77 mb
Free program - 276.53 mb
Is that ok for my EU HTC HD2?

Categories

Resources