Related
HI evryone,
I am just a beginner using android for few months... My device is Xperia X10 Mini pro U20i..
I tried to upgrade to MIniCM9 3.0.1 from CM7 (CM7 was working wel, i just wanted to upgrade)..
I downloaded MiniCM9-3.0.1 [5/5/12]ICS 4.0.4/CM9 from http://forum.xda-developers.com/showthread.php?t=1636501
I wiped cache, user data and dalvik cache n tried to install CM9 rom.. It installed successfully, but I received a warning message. 'Should have kernel flashed to atleast ics-nAa 01' like dat...
But when i rebooted, it didnt go beyond d Sony Ericsson logo.. I went back to stock 2.1 using SEUS..
Then I rooted mobile using SuperOneClick 1.6.5 n rooted successfully. But wen i flashed the kernel 'U20_nAa-ics_01_2.6.29.6-nAa-ics-01.ftf' or 'U20_nAa-ics_01_2.6.29.6-nAa-ics-02.ftf' from http://forum.xda-developers.com/showthread.php?t=1636504, it couldnt flash.. I get an error ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"..
I tried flashing with flashtool 0.2.9.1 and with flashtool 0.7.1.0 but i couldnt get it done..
Can anyone help me with dis? Why do i receive dat error message? How can I upgrade to CM9??
While upgrading to CM7, I never flashed my device. I just rooted it, installed xrecovery n cleared factory data, disk cache, dalvik cache n installed d rom... So, is there any similar way to install CM9 also without using flashtool?
Thanks..
You need a custom kernel for MiniCM9, and the reason you can not flash this kernel is because your bootloader is locked. In the kernel thread there is a link to the tutorial on unlocking your bootloader, but please be careful, it doesn't work for everyone
Thanks for dat...
Is there a way we can install CM9 on U20i without unlocking bootloader?
Also, plz tell, does SEUS work after unlocking bootloader?
No you can't install MiniCM9 on anything other than the nAa-ICS kernel, and for that you need an unlocked bootloader
Yes, seus or pc companion will still work with an unlocked bootloader. the worst that can happen when unlocking the bootloader is that you will lose the ability to use your phone as a phone (disabled radio-capabilities). Check if it still works before flashing a kernel and custom rom, if it doesn't relock the bootloader and stay on stock kernel.
How to relock Bootloader? Link for U20i Stock Kernel..
Oh. Thanks a lot..
How to relock bootloader? I saw in a forum somewhere that there s no way to relock bootloader..
Also I tried to download the stock kernel for U20i from this page: http://forum.xda-developers.com/showthread.php?t=1254225... They have given the link for downloading the stock kernel as http://db.tt/ukt80PBn
But the link doesnt work. I have searched many times but could neither open it nor find alternative link.. Can u plz tell any alternative link for it?
Thanks so much for ur responses..
First of all, you can relock your bootloader using S1Tool (by pressing the restore button), but if it is succesfully unlocked there is no need to relock it at all, unless you need to take it back to the shop for repairs under warranty.
(I can't remember where i got the latest version of S1tool from, i'll search for it later if you need it)
as far as the stock kernel is concerned, just do a repair with pc companion or maybe seus, i usually use pc companion. it won't relock your bootloader but will install a fresh stock kernel and rom. After that you can root, install recovery or cwm whatever you used and restore the backup you hopefully made of your MiniCM7 rom.
Mind you: At this moment Minicm9 is not an upgrade yet in the sense that it will make your phone work better or easier, it's still very early in development and not that easy to get working well, if you need your phone on a day-to-day basis, stick with MiniCM7 for now.
Thanks a lot for that info..
I hav no complaints wid CM7. I just wanted to upgrade to ICS since it is out there.
I'll try unlocking bootloader n cm9. I'll go back to cm7 if it doesnt work or if it isnt suited for day-to-day operations..
Thanks so mch for ur help.. I ve understood a lot.. Thanx again.. :-D
If u find d link for S1tool, kindly post it..
Sent from my U20i using XDA
S1Tool with Restore button
Good luck, i hope everything works fine for you
I unlocked d bootloader, flashed n installed d MiniCM9 rom...
It works fine.. ICS is awesome..
Thank u 4 all ur help
Happy days then Have fun...
x10 mini pro 2.1 to Gingerbread (MiniCM7)
sjoedanny said:
I unlocked d bootloader, flashed n installed d MiniCM9 rom...
It works fine.. ICS is awesome..
Thank u 4 all ur help
Click to expand...
Click to collapse
hi
I was checking xda forum for upgrading my x10 mini pro to gingerbread version and I am really confused with the whole process. At present I rooted my phone with superone click and confused with next steps. do i need to unlock bootloader ? do i need to flash with Naa kernel ? Some guides instructing to install minicm7 without unlock bootloader and kernel flash.which correct or good ? I dont know what to do and I dont want to brick my phone too. Please help me and thank you very much for ur time
shane64 said:
hi
I was checking xda forum for upgrading my x10 mini pro to gingerbread version and I am really confused with the whole process. At present I rooted my phone with superone click and confused with next steps. do i need to unlock bootloader ? do i need to flash with Naa kernel ? Some guides instructing to install minicm7 without unlock bootloader and kernel flash.which correct or good ? I dont know what to do and I dont want to brick my phone too. Please help me and thank you very much for ur time
Click to expand...
Click to collapse
If you want to run MiniCM7, by nAa, you need to unlock your bootloader and flash the nAa GB kernel (currently at version 13).
If you want to run MiniCM7Pro, you can run it without a custom kernel and without unlocking your bootloader.
They are two different ROMS with almost the same name, i can understand why that can be a bit confusing
MiniCM7Pro
Thank you very much SmG67, for your fast and valuable reply. Am a newbie here and I am trying to learn the things.Your information is really cleared my fear about bricking. I have few doubts to share with you sir,
What is the main difference between minicm7 and minicm7pro ?
If I opt minicm7pro now, then Can I upgrade or install minicm9 later ?
Minicm7pro by Bpaul is not giving any instruction for how to install it. So where can I get the instructions
SmG67 said:
If you want to run MiniCM7, by nAa, you need to unlock your bootloader and flash the nAa GB kernel (currently at version 13).
If you want to run MiniCM7Pro, you can run it without a custom kernel and without unlocking your bootloader.
They are two different ROMS with almost the same name, i can understand why that can be a bit confusing
Click to expand...
Click to collapse
shane64 said:
Thank you very much SmG67, for your fast and valuable reply. Am a newbie here and I am trying to learn the things.Your information is really cleared my fear about bricking. I have few doubts to share with you sir,
What is the main difference between minicm7 and minicm7pro ?
If I opt minicm7pro now, then Can I upgrade or install minicm9 later ?
Minicm7pro by Bpaul is giving any instruction for how to install it. So where can I get the instructions
Click to expand...
Click to collapse
Minicm7Pro was a port to the x10mini-pro from early MiniCM7 for the x10-mini, but it got updated to the latest Gingerbread, while still working with the stock kernel, minicm7 was released later and moved to the nAa-custom kernel, which gave it some performance benefits.
If you can unlock your bootloader, you can flash any kernel and rom you like that is available for your phone, but MiniCM7Pro or ArcMini Nxt (which runs on just about any kernel) are good places to start anyway.
for installing MiniCM7Pro you need:
2.1.1.A.0.6 firmware with *4015 baseband (check Settings - About Phone, the baseband should end in 4015)
Rooted phone
ClockWorkMod Recovery
Copy the MiniCM7Pro zip to your sd-card
Boot into CWM (press back-button on the kernel-logo)
Do a backup
Install the ROM
Wipe factory-data/reset
Wipe Cache
Wipe Dalvik-Cache (in CWM advanced)
Wipe Batttery Stats (in CWM advanced)
Reboot and enjoy
MiniCM7Pro
Thank you very much, and I am now looking into how to install it on my device.Because minicm7pro thread is not giving any step by step instruction to install it. I am really appreciating your help. Good day
@ SmG67
Thank you very much for your advice's and I upgraded my x10 mini pro to android 2.3.7 ( cm7 pro) . I really appreciating your help on this regard. I was out of station for a while,and that's the reason for this late reply.My phone is working without any problem except wifi hotspot, It will show turning on and continue that status without actually turning it on when I am trying to enable it.Although its not a big headache or function for me.so its okay.Once agin thanks.Good day
MiniCM 7 pro to ICS
@ SmG67
hi... My x10 mini pro running on Minicm7 pro by paul and stock kernel.I installed it according to your advice and I appreciating your helping words. Now I would like to move to ICS rom and nAa kernel. I have few doubts regarding installation.
1. Do I need to go back to old 2.1 factory ROM before flashing ics and ics nAa kernel ?
2. If yes, How can I install old SE rom ?
3. Can I install MiniCm9 over JB nAa kernel ? because it will reduce my job when am moving to ics to JB rom
Thx
shane64 said:
@ SmG67
Thank you very much for your advice's and I upgraded my x10 mini pro to android 2.3.7 ( cm7 pro) . I really appreciating your help on this regard. I was out of station for a while,and that's the reason for this late reply.My phone is working without any problem except wifi hotspot, It will show turning on and continue that status without actually turning it on when I am trying to enable it.Although its not a big headache or function for me.so its okay.Once agin thanks.Good day
Click to expand...
Click to collapse
shane64 said:
@ SmG67
hi... My x10 mini pro running on Minicm7 pro by paul and stock kernel.I installed it according to your advice and I appreciating your helping words. Now I would like to move to ICS rom and nAa kernel. I have few doubts regarding installation.
1. Do I need to go back to old 2.1 factory ROM before flashing ics and ics nAa kernel ?
2. If yes, How can I install old SE rom ?
3. Can I install MiniCm9 over JB nAa kernel ? because it will reduce my job when am moving to ics to JB rom
Thx
Click to expand...
Click to collapse
1. No
2. 1 was a no, so no need for that
3. No, it won't work.
For 2011 devices line, be sure you are not in MTP mode
Thank you SmG67....I checked my device with s1tool and found " SEMC SIMLOCK CERTFICATE " then forwarded to flash tool. But I faced an issue and my flashing halted. When I am connecting my phone it will detect and showing INFO : For 2011 devices line, be sure you are not in MTP mode ....then going to charging mode....Dont know whats the reason ? :crying:
For your info : I installed all x10,x8,x10 mini pro ADB drivers, fastboot drivers, Flashmode drivers etc. USB debugging is ON, unknown sources is enable......my flashtool version was 0.6.8.0 .
SmG67 said:
1. No
2. 1 was a no, so no need for that
3. No, it won't work.
Click to expand...
Click to collapse
shane64 said:
Thank you SmG67....I checked my device with s1tool and found " SEMC SIMLOCK CERTFICATE " then forwarded to flash tool. But I faced an issue and my flashing halted. When I am connecting my phone it will detect and showing INFO : For 2011 devices line, be sure you are not in MTP mode ....then going to charging mode....Dont know whats the reason ? :crying:
For your info : I installed all x10,x8,x10 mini pro ADB drivers, fastboot drivers, Flashmode drivers etc. USB debugging is ON, unknown sources is enable......my flashtool version was 0.6.8.0 .
Click to expand...
Click to collapse
Our phone is 2010 device so don't worry about the mtp mode thingy
Your lfashing halted because you didn't unlock your bootloader yet.
Connect your phone to flashtool
Choose Únlock bootloader' in the plugins menu
Follow Instructions
Flash the kernel
You should be fine
I have SE stock rom 2.1 update 1 with stock kernel on my x10i mini. I have rooted my device and I want to know if I can enable multitouch on my phone. Please someone help me .
Thanks in advance...
I didnt try only kernel,but I try custom MINICM7-2.2.0 based on GB 2.3.7 and it is like new phone reBORN, fast&stable.
Sort off, yes
Check this
For stock kernel
The links are dead.. Downloading of x8gesture.ko not working.
SmG67 said:
Sort off, yes
Check this
For stock kernel
Click to expand...
Click to collapse
downloading not working of x8gesture.ko
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
SmG67 said:
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
Click to expand...
Click to collapse
Do they require unlocking of bootloader .Actually I am afraid of this purpose.Is there any GB rom that can be flashed without unlocking bootloader on stock kernel 2.6.29 Thanks for Help.
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
SmG67 said:
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
Click to expand...
Click to collapse
Yeah !! in the output It shows SEMC something with capital R . Actually date is 10w29. Flashtool is big file and I have a slow connection... Smthng else for unlocking bootloader
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
SmG67 said:
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
Click to expand...
Click to collapse
Ok I am starting... Given 30 minutes to my wintage phone,
Thanks for paying attantion..
yupp its done ..XDA rocks B-)
You're welcome
Array. I've unlocked the bootloader and I have xrecovery on my phone. I also have put GB miniCM rom as update.zip on SD card
Now the problem is on GB thread it said that I should have naA kernel on my phone and on naA kernel thread it said that I should have GB custom rom. I have only unlocked the bootloader and still on stock rom and stock kernel.,
once again its ur turn to sort me out of this problem...
:-D
First you flash the nAa kernel using flashtool
Then flash the rom through cwm
Sent from my E10i using xda premium
Bro I have gone one step ahead and have installed cloclwordmod .. now I am flashing the naA kernel... But what after flashing the kernel if I start my phone do I have to first enter in CWM and flash new minicm7 rom or I can use this kernel on my stock rom 2.1
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
SmG67 said:
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
Click to expand...
Click to collapse
Done ;-)
hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks
Wrong thread buddy
Sent from my X10i using xda premium
elmanortega said:
hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks
Click to expand...
Click to collapse
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?
That rom is a 2.3 rom and you need to have and unlocked bootloader. You need to have 2.3 on your device first which would you would find in my signature below. So skip through the tread and find 2.3 Download it and flash it and try the rom again.
Sent from my X10i
Dude u r in 2.1 now. It has a baseband of .49 or .54. GB needs a baseband of .71. So the only option is first u download a pre-rooted firmware image and flash it via flashtool. U will boot into GB. Then unlock bootloader using Laser's method and install custom kernel like DoomKernel.
Follow this method
[RECOVERY image] {v2} X10 GB 3.0.1.G.0.75 [Prerooted + Fixed xRecovery] to insatll the prerooted firmware using flashtool.
Unlock bootloader using this steps from
[HOW-TO]UNLOCK bootloader for X10
Then flash DoomKernel from this link
[KERNEL][X10] DooMKernel [UNLOCKED BOOTLOADERS]{Rel:v06}[Dt:10/Jan][FW3.0.1.G.0.75] and boot up into stock rom or the previous GB rom u r using.
For Stock based roms, DoomKernel is simply the best.
For CM7 based roms, use FXP 130 kernel provided here FXP 130 and
For CM9 based roms, use FXP 132 kernel for better performance which u can download in FXP CM9 Thread.
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
kingstonxl said:
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?
Click to expand...
Click to collapse
He hasnt even updated to GB.. Still in stock 2.1.
Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i
brenty108 said:
Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i
Click to expand...
Click to collapse
Sry i didn kw ur post.. Let him do the way he think is best
thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?
elmanortega said:
thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?
Click to expand...
Click to collapse
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided
a2441918 said:
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided
Click to expand...
Click to collapse
thanks
Originally Posted by Androxyde
X10i Generic
Generic version 2.3.3 build 3.0.1.G.0.75 (MD5: 36F52BAA3556CDD7E56383614C01E5D6)
this one is no longer available
Thread Moved
You should Know better, your post count indicates you have been active, so should be fully aware of the rules
after i connect in flash mode
it stays for a few secs and reboots into the sse screen
is there a way to install the oem rom
in xrecovery?
or a 2.1 rom in recovery?
if i install a 2.1 custom rom
will that help??
im connected to flashtool in flash mode but nothing no options
what do i do now?
ok i finally go it to
where it was suppose to be to install formware
and this is where i am
Did you click fastboot? Click flashmode as x10 doesn't fastboot lol
Sent from my Xperia X10 using xda premium
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
If that rom is in ftf format
Open with 7zip or winrar
Look for kernel.sin
And place it in a folder
In flashtool create kernel
Point it to the folder containing kernel.sin
You should then be able to place your created kernel into firmware folder and flash it
I haven't had much experience with those roms so it's just a suggestion
Sent from my Xperia X10 using xda premium
elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
You need to install a kernel called fxp132 from team fxp for ICS ROM to work... see my other posts in Q&A.. I have uploaded it somewhere.. you should be able to access through my profile->-> posts.
Sent from my Transformer TF101 using xda app-developers app
elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
hey friend, you have downloaded the xperia s ics by vassishta but you dont know what kernel to be used?, dont be so lazy reading all the stuff in that thread (i mean xperia s ics), fxp 132 kernel is included there and instructions on how to flash the rom, hope i helped you, please press thanks button for me, pressing it is just an easy thing.. cheers.. :good:
hello all, i have rooted and install cwm on my ray and after these i installed a custom rom (4.0.4...) whatever i want to install MIUI rom . can you please tell me how to do this ? i have downloaded the rom from here http://forum.xda-developers.com/showthread.php?t=1825892 and tried to flash the rom via cwm ...cwm said 'successfully installed' but my device hang on "SONY" logo....can anybody tell me whats wrong ? ( i wiped all data )
my 2nd question : how flash kernel ? i tried via flashtools and flashtools said me that my device not rooted but this device is rooted
thanks in advance
shemulweb said:
hello all, i have rooted and install cwm on my ray and after these i installed a custom rom (4.0.4...) whatever i want to install MIUI rom . can you please tell me how to do this ? i have downloaded the rom from here http://forum.xda-developers.com/showthread.php?t=1841208 and tried to flash the rom via cwm ...cwm said 'successfully installed' but my device hang on "SONY" logo....can anybody tell me whats wrong ? ( i wiped all data )
my 2nd question : how flash kernel ? i tried via flashtools and flashtools said me that my device not rooted but this device is rooted
thanks in advance
Click to expand...
Click to collapse
dude, you have wrong miui version! the link you posted is for nexus 7.
no wonder if your phone not booting up.
install only miui for xperia ray, you can searh in this forum.
i am really sorry for my mistaken i have replaced the correct link ..please help me
shemulweb said:
i am really sorry for my mistaken i have replaced the correct link ..please help me
Click to expand...
Click to collapse
hey
were u able to install the MIUI rom on your ray. Even i am facing the same problem. Please guide if you have installed it
shemulweb said:
my 2nd question : how flash kernel ? i tried via flashtools and flashtools said me that my device not rooted but this device is rooted
thanks in advance
Click to expand...
Click to collapse
Have you unlocked your bootloader? I suspect not. This is what flashtools is referencing.
Custom roms and mods that work on stock kernels can be installed on rooted devices.
Some mods/roms make such significant changes to Sony's builds that a new kernel is required (MIUI, CM, AOKP). To install a custom kernel you need to unlock your bootloader.
You may read the instructions provided by the author of the rom., to flash kernels, you need to unlock your bootloader. Seek and you'll see.
Is that right? lol
Sent from my ST18i using xda app-developers app
Thanks friends
Thank you all. the problem was unlocking bootloader . after unlocked bootloader i have install the rom successfully. can anybody tell me which MIUI rom is much fast and smooth ?
shemulweb said:
Thank you all. the problem was unlocking bootloader . after unlocked bootloader i have install the rom successfully. can anybody tell me which MIUI rom is much fast and smooth ?
Click to expand...
Click to collapse
Now you’ve flashed one ROM on the Ray I can’t see you stopping
It doesn’t matter what WE recommend because your experience of which is the best ROM may be different to ours.
Try them all – I usually change mine once a month. But in my humble opinion, the most cutting edge, fully featured, experimental yet suitable for daily use ROM is PAC. My little Ray runs smoother than my wife’s Galaxy S2 and has so much more swagger – to borrow from AOKP.
so you recommend PAC rom ? actullay i want to stay with my stock based smooth (ASOP) ROM. if you know something then pls recommend me
guys im about to flash feralab jaf rom for my x10
i made a backup in xrec ,. if i dont like jaf rom or mess up in installation (i hva locked bootloader. and installing jaf rom for locked rom ), can i restore my current stock 2.3.3 rom from xrecovery ? please reply
theMoiz94 said:
guys im about to flash feralab jaf rom for my x10
i made a backup in xrec ,. if i dont like jaf rom or mess up in installation (i hva locked bootloader. and installing jaf rom for locked rom ), can i restore my current stock 2.3.3 rom from xrecovery ? please reply
Click to expand...
Click to collapse
Yes, sure You can. That's why the "backup" option is there