[Q] My HTC EVO 3D after i installed RUU Rom my device keeps restarting on HTC logo - HTC EVO 3D

Hello!
I installed this ruu
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28 .707.1_Radio_11.77.3504.00U_11.25.3504.0 6_M_release_264110_signed
I changed my cid to HTC__044
After it installed It stocks on HTC logo and keep restarting
What the solution
Sorry for my poor english
Thank you!

Abdosh192 said:
Hello!
I installed this ruu
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28 .707.1_Radio_11.77.3504.00U_11.25.3504.0 6_M_release_264110_signed
I changed my cid to HTC__044
After it installed It stocks on HTC logo and keep restarting
What the solution
Sorry for my poor english
Thank you!
Click to expand...
Click to collapse
The Only Thing I Can Think Of Is Rung The 2.17 RUU And Seeing What Happens. You Can Also Try To Re-Run The ICS RUU Un-Modified. Hope That Helps

NexusS4gFreak said:
The Only Thing I Can Think Of Is Rung The 2.17 RUU And Seeing What Happens. You Can Also Try To Re-Run The ICS RUU Un-Modified. Hope That Helps
Click to expand...
Click to collapse
I tried Re-Run the RUU
but it still the same problem

Any solution

What should i do!

I tried re-install it many times

try this
try downloading the PG86DIAG.ZIP file specific for your phone and then paste it on your sdcard, then boot up the phone into bootloader by turning on the phone while holding the volume down button and it should automatically flash.

swiftfraser said:
try downloading the PG86DIAG.ZIP file specific for your phone and then paste it on your sdcard, then boot up the phone into bootloader by turning on the phone while holding the volume down button and it should automatically flash.
Click to expand...
Click to collapse
THX DUDE :laugh:
---------- Post added at 03:41 AM ---------- Previous post was at 03:28 AM ----------
Abdosh192 said:
I tried re-install it many times
Click to expand...
Click to collapse
So Do I

Related

Restore evo 3d to latest stock RUU on hboot 1.5

OK, so the other night I was trying to restore to stock but I found the RUU giving me errors. I figured it out after hours of tedious work and here it is:
1. Download the latest RUU.
2. Uninstall HTC sync.
3. This is important: go into fastboot mode and using command prompt at the folder where fastboot.exe is stored, type in 'fastboot oem lock' without quotes into the window and press enter.
4. Run the RUU and follow instructions (while still in fastboot usb on phone).
tl;dr for more advanced users: you need to relock the bootloader to get the RUU to work
Hope this helps, peoples.
note: this only applies for hboot 1.5 htc unlocked people
Yup...
10char
THANK YOU!!
is ther anyway i can put the HTC sense back in?? i took it to metropcs store to flash the phone (f**ed it up top to bottom)..lolz but anyways he removed the sense n he made secondary my one n only theme...now its pain in the a$$ to get anything to work..lolz thankx if u can help
Stonko9 said:
is ther anyway i can put the HTC sense back in?? i took it to metropcs store to flash the phone (f**ed it up top to bottom)..lolz but anyways he removed the sense n he made secondary my one n only theme...now its pain in the a$$ to get anything to work..lolz thankx if u can help
Click to expand...
Click to collapse
So are you saying that you have tried to run an ruu and it did not restore the phone....?
an Ruu should definitely work.
Sent from my PG86100 using XDA App
i will definitely try this..................
i have hboot 1.5 and i tried to flash my phone to boost, since i missed something i need to reinstall RUU and do every process again.
and yes i tried to just reinstall RUU it does not work! (tried fastboot usb too!failed)
Now i will try your suggestion jdeoxys
btw will "locking" it makes it unlockable after too????
jdeoxys said:
OK, so the other night I was trying to restore to stock but I found the RUU giving me errors. I figured it out after hours of tedious work and here it is:
1. Download the latest RUU.
2. Uninstall HTC sync.
3. This is important: go into fastboot mode and using command prompt at the folder where fastboot.exe is stored, type in 'fastboot oem lock' without quotes into the window and press enter.
4. Run the RUU and follow instructions (while still in fastboot usb on phone).
tl;dr for more advanced users: you need to relock the bootloader to get the RUU to work
Hope this helps, peoples.
note: this only applies for hboot 1.5 htc unlocked people
Click to expand...
Click to collapse
This is good info! I didint know this. But thank god I dont have to deal with S-ON.
-Scott
Just want to bump this. Need to do this before I send my phone back in.
usb broken
My usb is not working i can only charge so i can not get into fast boot is there anything else i can do before i waste 100$o on insurance claim i will paypal donate 20$ to anyone who can help
i need direct link to latest ruu help pls.
aiua said:
i need direct link to latest ruu help pls.
Click to expand...
Click to collapse
Bump. Looking for RUU as well. Not the pg86img file but the ruu. I got this from ppc geeks http://forum.ppcgeeks.com/2154352-post28.html but the ruu is not available to free users.
Download the ruu. Find it in your phone and rename it pg86img. Now reboot into your hboot and wah lah. Your phone is back to stock
Sent from my blazing fast 3d using xda premium
Danger Dan said:
Download the ruu. Find it in your phone and rename it pg86img. Now reboot into your hboot and wah lah. Your phone is back to stock
Sent from my blazing fast 3d using xda premium
Click to expand...
Click to collapse
Download it from.......
I'm looking for the RUU the exe file you run on your computer not the zip file for sd flash.
Oh sorry. You can find it on Google if you search hard.
Sent from my blazing fast 3d using xda premium
I thought on hboot 1.5 the pgm.zip file or whatever its called won't work. I am trying to go back to stock. i relocked boot loader but cannot for the life of me figure out how to run the ruu.zip.. that's all i keep reading ... can someone explain exactly HOW to run a zip file? i'm on hboot 1.5, evo 3d, relocked.
Lady1178 said:
I thought on hboot 1.5 the pgm.zip file or whatever its called won't work. I am trying to go back to stock. i relocked boot loader but cannot for the life of me figure out how to run the ruu.zip.. that's all i keep reading ... can someone explain exactly HOW to run a zip file? i'm on hboot 1.5, evo 3d, relocked.
Click to expand...
Click to collapse
If you have already downloaded the exe to your pc then just plug your phone into your pc. If you phone is powered on just choose charge only from your pull down screen or when the usb window pops up. Then locate the .exe-ruu you downloaded to your pc and double click on it to run it and follow the instructions and you should be good. If you phone is powered off plug it into your pc. Then hold the volume up button and press power and and the fasboot menu should appear and it should state "fastboot usb" at the top. Then once again repeat the steps above once you located the .exe-ruu on you pc. Also make sure you have the correct ruu. Hope this helps.
Locked & Loaded
""shooter on Deck""
First thank you for your quick response... so i downloaded the RUU.ZIP file, do i need to download RUU.EXE instead? This is whats confusing me because i'm searching and cannot find ruu.exe file. Thanks!
---------- Post added at 01:15 AM ---------- Previous post was at 01:11 AM ----------
nevermind i think i may have found one.
Lady1178 said:
First thank you for your quick response... so i downloaded the RUU.ZIP file, do i need to download RUU.EXE instead? This is whats confusing me because i'm searching and cannot find ruu.exe file. Thanks!
---------- Post added at 01:15 AM ---------- Previous post was at 01:11 AM ----------
nevermind i think i may have found one.
Click to expand...
Click to collapse
Lol I'm glad you found one. Also yes you should be looking for an .exe.ruu which means that you have to run it from your pc. The zip file is for flashing the ruu threw fastboot. Hope all works out. Pm me if you need any assistance. Good luck.
Locked & Loaded
""shooter on Deck""
Asked and answered.
Lady1178 said:
First thank you for your quick response... so i downloaded the RUU.ZIP file, do i need to download RUU.EXE instead? This is whats confusing me because i'm searching and cannot find ruu.exe file. Thanks!
---------- Post added at 01:15 AM ---------- Previous post was at 01:11 AM ----------
nevermind i think i may have found one.
Click to expand...
Click to collapse
Do you know what RUU means? Obviously not, because you wouldn't be asking this question.
Odoslané z môjho HTC EVO 3D X515m cez Tapatalk

[Q] SOME one PLEASE HELP....Evo 3d Stuck in boot loop ? soft brick

Really need some help...I was flashing my evo to boost using CDMA and phone just rebooted...now stuck in boot loop. have tried a couple of ruu's but none of them worked. not sure what im doing wrong im using 4xt touch recovery. phone is rooted and boot loader unlocked. tried flashing new rom. restart phone gets to htc screen and then reboots.Ive tried to flash new boot img with no luck. when the phone boots into bootloader its missing a buch of files pg86.img not found??? and a bunch of other files with same file name but different extension please help....i love this phone...
ceslove said:
Really need some help...I was flashing my evo to boost using CDMA and phone just rebooted...now stuck in boot loop. have tried a couple of ruu's but none of them worked. not sure what im doing wrong im using 4xt touch recovery. phone is rooted and boot loader unlocked. tried flashing new rom. restart phone gets to htc screen and then reboots.Ive tried to flash new boot img with no luck. when the phone boots into bootloader its missing a buch of files pg86.img not found??? and a bunch of other files with same file name but different extension please help....i love this phone...
Click to expand...
Click to collapse
All the files not being found with different extensions is normal
It always searches for all of these files every time you load the bootloader, and unless you put a pg86.img on your sd card,than it's okay that it's not there.
If a ruu doesn't help, then I don't know, Does the RUU give an error??
If so what does the error say.
ceslove said:
Really need some help...I was flashing my evo to boost using CDMA and phone just rebooted...now stuck in boot loop. have tried a couple of ruu's but none of them worked. not sure what im doing wrong im using 4xt touch recovery. phone is rooted and boot loader unlocked. tried flashing new rom. restart phone gets to htc screen and then reboots.Ive tried to flash new boot img with no luck. when the phone boots into bootloader its missing a buch of files pg86.img not found??? and a bunch of other files with same file name but different extension please help....i love this phone...
Click to expand...
Click to collapse
first off what hboot are you using AND what RUU are you using....if you have hboot 1.58 and are trying to use RUU 2.17 then it will bootloop like that....if you have hboot 1.58 say so and we can direct you to the correct RUU to use bc 2.17 is totally wrong
thanks!!!
wloftus said:
first off what hboot are you using AND what RUU are you using....if you have hboot 1.58 and are trying to use RUU 2.17 then it will bootloop like that....if you have hboot 1.58 say so and we can direct you to the correct RUU to use bc 2.17 is totally wrong
Click to expand...
Click to collapse
SHOOTER XC SHIP S_ON RL
HBOOT_1.58
eMMC-boot
my hboot is 1.58
thanks i really appreciate the help
ceslove said:
SHOOTER XC SHIP S_ON RL
HBOOT_1.58
eMMC-boot
my hboot is 1.58
thanks i really appreciate the help
Click to expand...
Click to collapse
RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1 .09.00.0706_signed.exe
Search for that on google
ceslove said:
SHOOTER XC SHIP S_ON RL
HBOOT_1.58
eMMC-boot
my hboot is 1.58
thanks i really appreciate the help
Click to expand...
Click to collapse
use this RUU and you should be good to go
http://goo.im/stock/shooter/ruu
thanks!!!
ok first i want to say thanks for the help....
so how do i load these now???
whats the difference between the two programs RUU???
ceslove said:
ok first i want to say thanks for the help....
so how do i load these now???
whats the difference between the two programs RUU???
Click to expand...
Click to collapse
You put your phone in fastboot usb, Google it. And double click the ruu on your pc, It's a program its self with an explanitory UI, That is all.
And remember to spam our thanks button. Not just say it.
ceslove said:
ok first i want to say thanks for the help....
so how do i load these now???
whats the difference between the two programs RUU???
Click to expand...
Click to collapse
to use tis file you have to take your phone and go into your hboot and select fastboot
next plug your phone up to the computer via the usb cable
the ruu i gave you the link for double click that on the computer and let it run .....this iis something that must be done on a windows computer not a linux
the difference is that one is a zip file and it contains the gingerbread version of android which functions mainly with hboot 1.4,1.5 or 1.04 eng
the zip file can be installed by renaming it to pg86img.zip and going to hboot
the file you are supposed to down load contains the file for ice cream sandwhich which runs on hboot 1.58.... so since youre s-on you have to use this file and run it then you can go about customizing it
tried one ruu???
so i tried ruu RUU_Shooter_ICS_35_S_Sprint_WWE_VM_1.13.652.2_Radio_1.06.00.0426_NV_1.53_144_release_262287_signed.exe, and got an error code 131 customer error???
what can i do???
ok one worked but....
so i ran this ruu RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed, it worked but when i reboot it gets to the htc brillant screen and reboots ???
what am i doing wrong??? and what can i do???
ceslove said:
so i tried ruu RUU_Shooter_ICS_35_S_Sprint_WWE_VM_1.13.652.2_Radio_1.06.00.0426_NV_1.53_144_release_262287_signed.exe, and got an error code 131 customer error???
what can i do???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1849716
try that
or http://www.wiki-errors.com/err.php?wiki=131
please help???
so i tried this RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed ... it loaded fine but when i rebooted its now just going to the htc brilliant screen and rebooting??? what can i do???
ceslove said:
so i ran this ruu RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed, it worked but when i reboot it gets to the htc brillant screen and reboots ???
what am i doing wrong??? and what can i do???
Click to expand...
Click to collapse
ceslove said:
so i tried this RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed ... it loaded fine but when i rebooted its now just going to the htc brilliant screen and rebooting??? what can i do???
Click to expand...
Click to collapse
That's an interesting way to bump a thread.
If you successfully flashed the RUU and the phone won't boot you probably need to get it replaced.
ramjet73
sooo....
is there nothing else that i can do....so i fried my phone???
im assuming you mean get the phone replaced???
do i need to update the boot.img??? any other ruu's that i can use??? i loaded RUU sugested but they didnt work??? i may need a step by step....
ceslove said:
do i need to update the boot.img??? any other ruu's that i can use??? i loaded RUU sugested but they didnt work??? i may need a step by step....
Click to expand...
Click to collapse
try flashing the boot.img file manually through fast boot ... make sure your bootloader is unloacked
wloftus said:
try flashing the boot.img file manually through fast boot ... make sure your bootloader is unloacked
Click to expand...
Click to collapse
He said he flashed the RUU successfully and the phone still wouldn't boot. I have no way to confirm that's true but if it is I don't think flashing anything else is going to help him at this point and he should at least get someone at Sprint to look at the phone since presumably it's been reset back to stock.
ramjet73
ramjet73 said:
He said he flashed the RUU successfully and the phone still wouldn't boot. I have no way to confirm that's true but if it is I don't think flashing anything else is going to help him at this point and he should at least get someone at Sprint to look at the phone since presumably it's been reset back to stock.
ramjet73
Click to expand...
Click to collapse
i figure its worth a shot if it doent work its not like it is going to break it...right? but if it doesnt work then id agree with you and say take it in

Desire X won't boot after update

i've got a stock Desire X and after update to 4.1.1 it won't boot. it's stuck on HTC Logo.. please help me.. is my bootloader dead, motherboard dead or i can revive it like i did with my desire with a jtag.
cabasse_tronic said:
i've got a stock Desire X and after update to 4.1.1 it won't boot. it's stuck on HTC Logo.. please help me.. is my bootloader dead, motherboard dead or i can revive it like i did with my desire with a jtag.
Click to expand...
Click to collapse
What is your Hboot?
Sounds like the update was incomplete. Take a look into JB nandroid section to find a nand of your cid and be sure to flash the right kernel via fastboot, which you should be able to access.
---------- Post added at 02:17 PM ---------- Previous post was at 02:16 PM ----------
And yeah. double check hboot version (1.25 and higher is JB...)
Have you tried running a RUU?
where can I download RUU for this model, I got a phone is turned off and is not included, only that he makes this when connected to a PC lights up "orange light" and is defined as what the unknown device.
found file RUU . tried to restore but nothing came out. tell me the topic where I will tell what to do with my phone.
lastniik said:
found file RUU . tried to restore but nothing came out. tell me the topic where I will tell what to do with my phone.
Click to expand...
Click to collapse
What is your Hboot and cid?
GtrCraft said:
What is your Hboot and cid?
Click to expand...
Click to collapse
I got the phone is already in such a state, and not know him CID and version HBOOT .
want to recover it, I like this model
Soory for my English (translator online)
lastniik said:
I got the phone is already in such a state, and not know him CID and version HBOOT .
want to recover it, I like this model
Soory for my English (translator online)
Click to expand...
Click to collapse
You can't go into bootloader?
GtrCraft said:
You can't go into bootloader?
Click to expand...
Click to collapse
no, telephone does not react to pressing the power button, just connect your phone to the PC orange light comes on in the task Manager is defined as the processor.
lastniik said:
no, telephone does not react to pressing the power button, just connect your phone to the PC orange light comes on in the task Manager is defined as the processor.
Click to expand...
Click to collapse
Then send it to an HTC service center or to the shop where you bought it.
It's dead and you can't revive it yourself
but he is still determined by the Manager, is there any program to restore this device? restore on it HBOOT and go into Recovery. well and so on.
lastniik said:
but he is still determined by the Manager, is there any program to restore this device? restore on it HBOOT and go into Recovery. well and so on.
Click to expand...
Click to collapse
You can't do anything if you can't go into bootloader or fastboot
understand, thank you very much for your help.

PLZ help me instal rom on my EVO

Hello im newb here but i know about root and stuff
so...
Hboot 1.53
ICS KingCobra 3d
and.... i try install CM11LiquidSmooth http://forum.xda-developers.com/showthread.php?t=2638534
i do everything they sayd....
_format all
_instal rom
_instal GAAPS
and i get stuck on 1st boot at HTC screen...
what should i do to get CM11 installed normaly.... ?
Magar90 said:
Hello im newb here but i know about root and stuff
so...
Hboot 1.53
ICS KingCobra 3d
and.... i try install CM11LiquidSmooth http://forum.xda-developers.com/showthread.php?t=2638534
i do everything they sayd....
_format all
_instal rom
_instal GAAPS
and i get stuck on 1st boot at HTC screen...
what should i do to get CM11 installed normaly.... ?
Click to expand...
Click to collapse
Phone must be on hboot 1.49.xxxx and S-Off
SiljoCRO said:
Phone must be on hboot 1.49.xxxx and S-Off
Click to expand...
Click to collapse
It is S off
1.49 ? how i can downgrade it? (easy way plz)
I see i can easly use zip file via bootloader but when i do it nothing happen...
EDIT 2
I have cid Htc_032
i tryied in bootloader but after "pushing zip." nothing happens... i realy dunno what to do
Magar90 said:
It is S off
1.49 ? how i can downgrade it? (easy way plz)
I see i can easly use zip file via bootloader but when i do it nothing happen...
EDIT 2
I have cid Htc_032
i tryied in bootloader but after "pushing zip." nothing happens... i realy dunno what to do
Click to expand...
Click to collapse
Rename your h-boot zip to PG86IMG and put it on root of your SD card. Then just reboot to bootloader and when prompted press vol up button. When it's done you need to delete that zip from your SD or rename it
donkeykong1 said:
Rename your h-boot zip to PG86IMG and put it on root of your SD card. Then just reboot to bootloader and when prompted press vol up button. When it's done you need to delete that zip from your SD or rename it
Click to expand...
Click to collapse
w8 w8... tell me how... like for total retard...
i have renamed zip i have it on SD i press fastboot there are green commands and "pushing file *zip name*" and nothing more... its take about 8sec and nothing is maded or downgraded
Magar90 said:
w8 w8... tell me how... like for total retard...
i have renamed zip i have it on SD i press fastboot there are green commands and "pushing file *zip name*" and nothing more... its take about 8sec and nothing is maded or downgraded
Click to expand...
Click to collapse
You don't need a computer or fastboot. You just take out your battery, put it back, and press power and vol down to get into bootloader. When bootloader comes up, it will scan your SD card and when it finds PG86IMG it wil ask you if you want to update. Press vol up ( that means "yes") and wait till it's done
donkeykong1 said:
You don't need a computer or fastboot. You just take out your battery, put it back, and press power and vol down to get into bootloader. When bootloader comes up, it will scan your SD card and when it finds PG86IMG it wil ask you if you want to update. Press vol up ( that means "yes") and wait till it's done
Click to expand...
Click to collapse
nope... i done that and its scan SD and ask me nothing.... why ?
Magar90 said:
nope... i done that and its scan SD and ask me nothing.... why ?
Click to expand...
Click to collapse
Sorry, it should be PG86IMG.zip
I hate that captcha....
So i renamed it to PG86IMG.zip no its do nothing again... i realy dunno....
green status commands pops and nothing more
donkeykong1 said:
Sorry, it should be PG86IMG.zip
Click to expand...
Click to collapse
any help ?
" hate that captcha....
So i renamed it to PG86IMG.zip no its do nothing again... i realy dunno....
green status commands pops and nothing more
TODAY 04:02 PM"
EDIT posted secong post for quote (its send reminder to email helping ppl to see if some1 post = faster answer)
Magar90 said:
any help ?
" hate that captcha....
So i renamed it to PG86IMG.zip no its do nothing again... i realy dunno....
green status commands pops and nothing more
TODAY 04:02 PM"
EDIT posted secong post for quote (its send reminder to email helping ppl to see if some1 post = faster answer)
Click to expand...
Click to collapse
Did you place zip in root of your card?
donkeykong1 said:
Did you place zip in root of your card?
Click to expand...
Click to collapse
what do u mean ? There is note "paste to ur sd card" so i do it "pasted on sd main folder not any sub folder|"
Magar90 said:
what do u mean ? There is note "paste to ur sd card" so i do it "pasted on sd main folder not any sub folder|"
Click to expand...
Click to collapse
That's it. It should work. I'll send you the zip file that worked for me
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
https://www.dropbox.com/s/z4l4i6b4wvi9mdv/PG86IMG.zip
Here you go. Delete yours, and try with this one
donkeykong1 said:
That's it. It should work. I'll send you the zip file that worked for me
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
https://www.dropbox.com/s/z4l4i6b4wvi9mdv/PG86IMG.zip
Here you go. Delete yours, and try with this one
Click to expand...
Click to collapse
same thing... get lots of green commands
than 1 Pushing zip file and its back to menu....
i have s off "unlocked" bootloader and dunno realy feel dumb -.-
EDIT i have
-unlocket bootloader
-s on (my bad i say s off)
so there is my problem i thing
Magar90 said:
same thing... get lots of green commands
than 1 Pushing zip file and its back to menu....
i have s off "unlocked" bootloader and dunno realy feel dumb -.-
Click to expand...
Click to collapse
I really don't know why it won't work, sorry
donkeykong1 said:
I really don't know why it won't work, sorry
Click to expand...
Click to collapse
i need s off to downgrade hboot?
Magar90 said:
i need s off to downgrade hboot?
Click to expand...
Click to collapse
Yes. If you're S-on, it won't work. You got me worried there [emoji29]
donkeykong1 said:
Yes. If you're S-on, it won't work. You got me worried there [emoji29]
Click to expand...
Click to collapse
not only u ;p But i get root and s off i tough so...
so can u help me s off? without wire trick... i have cid 032
Magar90 said:
not only u ;p But i get root and s off i tough so...
so can u help me s off? without wire trick... i have cid 032
Click to expand...
Click to collapse
With your h-boot version wire trick is the only way to get s-off. CID is not important
donkeykong1 said:
With your h-boot version wire trick is the only way to get s-off. CID is not important
Click to expand...
Click to collapse
this wont work ?http://forum.xda-developers.com/showthread.php?t=1795934
its feel more easy than wire trick
damn its countain wire... can u tell me tehre is any CM 11 or andy 4.2.x rom for this htc 1.53 hboot?
i want kitkat but i dont want making wire....

Stock KitKat 4.4 T6UL International backup

This is for all the people messaging me for my backups for the international version T6UL
My dropbop has been maxed out, so i've created a torrent to share my kitkat backup.
You need TWRP 2.7.0.0 to restore
Totally Stock never been rooted. took this backup as soon as i got the ota.
Backup you current device rom (this is what everyone should have done themselves before messing with new roms)
download torrent, https://www.dropbox.com/s/a5sjuu5ozidngzn/kitkat_stock_clean_TWRP.rar.torrent
unrar the comtents to your external sdcard.
before you restore from my backup, wipe your system! that will remove all root so backup restores clean. ota will then work with stock recovery.
Reboot and you should now be totally stock
i tried this before with my backup but it keep freezing in htc boot screen for hour
rowihel2012 said:
i tried this before with my backup but it keep freezing in htc boot screen for hour
Click to expand...
Click to collapse
i've never uploaded this before. this i tested before i posted.
if your freezing on boot screen then your hboot is incompatible
japodude said:
i've never uploaded this before. this i tested before i posted.
if your freezing on boot screen then your hboot is incompatible
Click to expand...
Click to collapse
what's your hboot version?
mine is 2.47 , can i use your backup?
blue8 said:
what's your hboot version?
mine is 2.47 , can i use your backup?
Click to expand...
Click to collapse
my hboot is 2.49.0000. as far as i know you need hboot 2.49 for kitkat.stock
so no i'm sorry. unless you update hboot
HOW WILL YOU UPDATE HBOOT 2.47 to 2.49
I have t6ul htc one max CID J15
Reboot the phone into the bootloader by either:
Powering off your phone completely, then hold Volume-Down and Power until the phone boots into the bootloader
If you have the android sdk set up, type 'adb reboot-bootloader'
Connect your phone to the computer (if it isn't already) and issue the fastboot command
Code:
fastboot oem rebootRUU
To flash the zip, issue the fastboot command
Code:
fastboot flash zip <YourZipName>.zip
The device's progress bar may not be complete, but when the fastboot command says it's complete, issue the fastboot command
Code:
fastboot reboot
sir this is incloud arabic lang or not
thx
amralkareem said:
sir this is incloud arabic lang or not
thx
Click to expand...
Click to collapse
i have no idea
How to unpack torrent
So I tried to unpack your torrent. I renamed it and used the RarZilla Free Unrar program. refused to unpack. What am I doing wrong? I hope I am posting this OK, I'm a noob.
View attachment 2731815
[email protected] said:
So I tried to unpack your torrent. I renamed it and used the RarZilla Free Unrar program. refused to unpack. What am I doing wrong? I hope I am posting this OK, I'm a noob.
View attachment 2731815
Click to expand...
Click to collapse
its compressed with winrar
mumtaz0786 said:
I have t6ul htc one max CID J15
Click to expand...
Click to collapse
Check in here mate. This one would work on your CID for sure.
http://forum.xda-developers.com/showthread.php?p=2
Sent from my HTC One max using XDA Premium 4 mobile app
---------- Post added at 09:05 AM ---------- Previous post was at 09:04 AM ----------
amralkareem said:
sir this is incloud arabic lang or not
thx
Click to expand...
Click to collapse
If your CID is HTC__J15 then check this one out. Thisone has Arabic language
http://forum.xda-developers.com/showthread.php?p=2
Sent from my HTC One max using XDA Premium 4 mobile app
is this odexed???
Is Ithis odexed?
Guys there's nobody seeding, please help me I really need this...:crying:
Thank you
I have t6ul htc one max CID_044???
japodude said:
its compressed with winrar
Click to expand...
Click to collapse
Do u have direct link?
I can't download that

Categories

Resources