Related
Anyone else having issues with loose buttons on the side? Specifically the camera button is loose on mine, and when I shake my phone (don't do it too often ;-) you can hear a rattle. Wondering if it's worthwhile to get it replaced or if this really is a larger 'issue' and considered normal.
I contacted Nokia, but did not receive a response yet.
I'd take it straight back to the shop and get a replacement.
rob_p said:
I'd take it straight back to the shop and get a replacement.
Click to expand...
Click to collapse
Yep, I'm going back anyhow - unfortunately they have no stock right now, but I already contacted them that I'm unhappy with this. Just not sure how they will respond when I'm actually physically there. Hopefully more info on that tomorrow.
I've been searching around and there appear to be numerous posts on the web of people with the same issue - so maybe it's "normal" or "within specifications".
Use rubber case
Hi,
I thought the same thing but that was before I fitted the rubber case. this rubber case isn't optional as it seems in the beginning. If you use the case everything fits snuggly.
I hope this solves your problem.
Greets
I had the same thing, took it back for a replacement.
Mine rattle slightly I wouldn't take it back because of it though. Your replacements... They don't rattle?
Sent from my Lumia 800 using XDA Windows Phone 7 App
deffo norattle at all on mine though the power button is uber sensative and i have turned my phone off by mistake a couple of times, for some reason i see something that says slide down and i just do it without thinking lol.
FYI - I just replaced my phone for a new one, this one doesn't have the issue I described!
i have it as well...
but i won my phone in a contest, pretty strange to ask for a replacement then
And i'm used to it now so not annoyed any longer.
I don't like the rubber skin for the phone, it makes the phone look fat
Anyone else having physical problems with their Z2?
As of a few weeks ago, I've started noticing that the top right corner of the back panel of my Z2 popping up slightly (like 2mm to 3mm) several times a day and I would have to press it back down. The cover on the USB/SIM area will also mysteriously be open sometimes when I fish the phone out of my pocket even though it does still feel quite firmly closed once I put the cover back in place.
I went down to my local Sony service centre and they said that they will rectify the issues for me and might replace the "loose" flap too (also told me to avoid water since it's not waterproof with the back like that) - but it would take 7 working days and that I should call their helpline to check if there was any issue for me sending my set in as it has an unlocked BL.
Seems like the original Z had the same problem with the back cover - http://www.xperiablog.net/2013/08/0...ose-back-panels-water-resistance-compromised/ and the loose flaps issue isn't new either (but the rubber seals on mine look perfect).
Flash a stock kernel and relock your bootloader, few people actualy check these days for DRM keys however they do check rarely for your bootloader status
And your physical problems are totaly abnormal so try very hard to get a replacement
Sent from my D6503 using XDA Premium 4 mobile app
for the flap problem, easy easy fix. Get some silicone grease at your hardware store or wherever. Take a lil and moisturise the flaps' rubber, works like a charm. Seems like the seal just dries out.
hotnikkelz said:
for the flap problem, easy easy fix. Get some silicone grease at your hardware store or wherever. Take a lil and moisturise the flaps' rubber, works like a charm. Seems like the seal just dries out.
Click to expand...
Click to collapse
I just tried it and it seems to make the flap come loose more easily. Looking at the flap, it seems to pop open because of insufficient friction between the seals and the socket for the flap...
benengyj said:
I just tried it and it seems to make the flap come loose more easily. Looking at the flap, it seems to pop open because of insufficient friction between the seals and the socket for the flap...
Click to expand...
Click to collapse
You didn't cake it on I hope. You're putting a really small amount. Like really small. It worked for me. Sowwy
Sent from my D6503 using Tapatalk
OMG what a ****ty phone. I will never buy Sony again. I have only problems with this crap.
hotnikkelz said:
You didn't cake it on I hope. You're putting a really small amount. Like really small. It worked for me. Sowwy
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Is this same as CPU's thermal paste?
hotnikkelz said:
You didn't cake it on I hope. You're putting a really small amount. Like really small. It worked for me. Sowwy
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
I just applied this - http://www.wd40specialist.com/products/silicone-lubricant/) - thinly using a q-tip. No worries. Wasn't too expensive and it could be closed again once I cleaned it off. Tried a slightest touch of hair gel (I was desperate...LOL) and that didn't work too well either.
I guess I'll just try to relock the BL and feign ignorance and send it in for "hardware faults" even though the bored sounding helpdesk lady on the phone said that the warranty is voided.
misiakr said:
OMG what a ****ty phone. I will never buy Sony again. I have only problems with this crap.
Click to expand...
Click to collapse
Genuinely quite disappointed with the niggling faults that the phone has. Random freezes and self-reboots and WIFI issues on my Z2 and my dad's Z1 is making me lose confidence in Sony to deliver a solid all-round device. It's a really beautiful phone with a wonderful camera but compared to build quality and software stability my previous HTC M7 (converted to a GPE ROM) which was essentially bulletproof and could have months and months of uptime without a reboot...ugh.
benengyj said:
Anyone else having physical problems with their Z2?
The cover on the USB/SIM area will also mysteriously be open sometimes when I fish the phone out of my pocket even though it does still feel quite firmly closed once I put the cover back in place.
Click to expand...
Click to collapse
I also have the loose USB flap problem. I've ordered a new one, I hope this will fix the problem.
It seems like sonys new factory has screwed the Z2 lol
My first Z2 brand new the back plate was lose enough for it to fall out and it did a few times also has all the probs mentioned in the op post
This new one is fine ,no reboots, no blackouts,no lags, no crashss bugs no probs
Sent from my D6503 using XDA Premium 4 mobile app
Envious_Data said:
It seems like sonys new factory has screwed the Z2 lol
My first Z2 brand new the back plate was lose enough for it to fall out and it did a few times also has all the probs mentioned in the op post
This new one is fine ,no reboots, no blackouts,no lags, no crashss bugs no probs
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think that only the loose USB flap is a very recurrent problem.
nreuge said:
I think that only the loose USB flap is a very recurrent problem.
Click to expand...
Click to collapse
It seems like it too because my USB flap isnt neccisarily lose, it seems to sit deeper in the frame, it isnt flush with the rest of the frame or like my SDCard Slot
Sent from my D6503 using XDA Premium 4 mobile app
For me, the flaps are good, and the back panel on the edges doesn't seem to pop up or to be misaligned with the edge, but on a light press on a few places it feels like the back panel is loose, and you can hear a small "tactile" feedback when pressed.
Should i get it checked or is it just a little hollow on these few places? For me that's the spot a little to the left and bottom of the SONY logo on the back, in height of the volume rocker.
tomaach said:
For me, the flaps are good, and the back panel on the edges doesn't seem to pop up or to be misaligned with the edge, but on a light press on a few places it feels like the back panel is loose, and you can hear a small "tactile" feedback when pressed.
Should i get it checked or is it just a little hollow on these few places? For me that's the spot a little to the left and bottom of the SONY logo on the back, in height of the volume rocker.
Click to expand...
Click to collapse
me too... but imho it isn't a problem...
I kinda semi-fixed the loose flaps by cleaning off the accumulated dust around the edges of the seal and the covered area...doesn't seem to fall out as often now.
Envious_Data said:
It seems like it too because my USB flap isnt neccisarily lose, it seems to sit deeper in the frame, it isnt flush with the rest of the frame or like my SDCard Slot
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've received my new USB flap and the issue is fixed, the new flap is not loose. It was not due to the phone body as I feared but a premature wear of the flap...
Anyway, I don't recommend to open the flap but in exceptional circumstances. Transferring files wireless and charging phone with magnetic port should be the rule and recommended by Sony.
benengyj said:
I kinda semi-fixed the loose flaps by cleaning off the accumulated dust around the edges of the seal and the covered area...doesn't seem to fall out as often now.
Click to expand...
Click to collapse
Can you explain why you have not returned your mobile under warranty for repair or replacement?
Ryland
nreuge said:
I've received my new USB flap and the issue is fixed, the new flap is not loose. It was not due to the phone body as I feared but a premature wear of the flap...
Anyway, I don't recommend to open the flap but in exceptional circumstances. Transferring files wireless and charging phone with magnetic port should be the rule and recommended by Sony.
Click to expand...
Click to collapse
My flap has been back to normal since cleaning out the dust from around the silicone seal.
Ryland Johnson said:
Can you explain why you have not returned your mobile under warranty for repair or replacement?
Ryland
Click to expand...
Click to collapse
To be honest, it's just the hassle of having to wait a week (and having to go back to my HTC M7) or so for them to get it fixed. Plus my set might not be accepted by them as the BL is unlocked (towelroot came too late for me unfortunately )
I do intend to send it in for repairs (also dinged the flap a little, might as well get that swapped out too) some time soon as the loose back is really REALLY bugging me.
My god I have the same problem. Everytime I pull it out of my pocket the flap is out. Damn this phone was perfect . I cleaned soo ****ing well and the USB flap stays in more time but its still poping out.
Hi guys,
I have been facing a problem with the falp on the left side of my xperia z2 (white, but has no gaps nor missaligns), which is that it keeps coming off. First it was ok, nothing moved, then, after opening and closing 4 times to connect to the PC it started coming off.
Now i only take it off to plug it tot he charger. infact, i bought and adapter so that i can use the wireless charging already.
The only solution I found was on a thread where someone said to put sillicone lube on it. This worries me, since i've put some (not to gross out people) "mouth moisture", AKA spit, on the rubber and it instantly makes the flap jump out of position, so i assume a lube will only make it worse.
I have contacted sony but if i send it to repais i will be without a phone for atleast 10 working days, and that is if i'm lucky....
This is a problem, since the phone is waterproof, or i would just cut off the damn thing
Does anyone have a solution for this?
thank you very much
Ive found that the flap its self losens after time but it being closed is only problematic when there is dust in the port, cleaning it out solves my problem
Sent from my D6503 using XDA Premium 4 mobile app
i wont agree you! just keep thanking God!
Envious_Data said:
Ive found that the flap its self losens after time but it being closed is only problematic when there is dust in the port, cleaning it out solves my problem
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well, unfortunatly not mine... that was the forst thing I did when it stopped closing.
Amazingly now it is staying closed, has not self-opened for about 8 hours.
I guess it just gets posessed now and then...
I'd get that checked out, been using mine a lot since I got it a month ago and this has never happened, surely this will affect the water resistance.
Posted a thread about this previously - http://forum.xda-developers.com/showthread.php?t=2787102
Same with what Envious_Data said, cleaning out the dust from the flap and the "socket" where the silicone seal seats solved the problem for me.
benengyj said:
Posted a thread about this previously - http://forum.xda-developers.com/showthread.php?t=2787102
Same with what Envious_Data said, cleaning out the dust from the flap and the "socket" where the silicone seal seats solved the problem for me.
Click to expand...
Click to collapse
"I kinda semi-fixed the loose flaps by cleaning off the accumulated dust around the edges of the seal and the covered area...doesn't seem to fall out as often now."
This is what you answered on your post and i have seen the answer, but " doesnt seem to fall as often now" is not, imho, the ideal scenario for a 700 euro phone, now is it?
Mine has not fallen today, which is a freaking miracle. Did not do a thing to it, it just... fixed itself i hope. Not gonna put it under water though
badjoras said:
"I kinda semi-fixed the loose flaps by cleaning off the accumulated dust around the edges of the seal and the covered area...doesn't seem to fall out as often now."
This is what you answered on your post and i have seen the answer, but " doesnt seem to fall as often now" is not, imho, the ideal scenario for a 700 euro phone, now is it?
Mine has not fallen today, which is a freaking miracle. Did not do a thing to it, it just... fixed itself i hope. Not gonna put it under water though
Click to expand...
Click to collapse
Haven't have it pop open on me since then actually. However I do fully agree with you that it's totally unacceptable for a shiny new flagship device to have such flaws.
I got the damn same problem! It looks like is the dirt but it might be something else. I cleaned the flap pretty (really) well. I did it with a slightly weet (with alchol, be carefull)cotton swap. I had to do this two times to be sure its really clean.Its holding more time in its place now. I'll post if the flap pop out again by itself.
badjoras said:
I have contacted sony but if i send it to repais i will be without a phone for atleast 10 working days, and that is if i'm lucky....
Does anyone have a solution for this?
Click to expand...
Click to collapse
Sony do, either send it for repair or live with it.
Bear in mind if any home made repairs ie silicone gel worsen matters you may find Sony refuse to fix ot
Everybody must try this! Remove the flap then try to put it back in its place. Im going to buy a new one in future (just in case). Here is a video I found, it shows how to remove the flap https://www.youtube.com/watch?v=xzXmsgNP2Eg&app=desktop
Its working for me!! But im still testing (I guess im going to start to use my magnetic charger more often)
"thanks" if I helped
Enomine said:
Everybody must try this! Remove the flap then try to put it back in its place. Im going to buy a new one in future (just in case). Here is a video I found, it shows how to remove the flap https://www.youtube.com/watch?v=xzXmsgNP2Eg&app=desktop
Its working for me!! But im still testing (I guess im going to start to use my magnetic charger more often)
"thanks" if I helped
Click to expand...
Click to collapse
and just like that i love you
i think ill be adding this to the Help mega thread as XDA calls it
***Update to the problem, and SOLUTION:***
Definitely its the flap. I bought one from here (they are original) http://www.witrigs.com/sony-xperia-z2-replacement-parts and finally after more than 40 days!! it arrived and now my z2 is 100% waterprof again! Im very happy now. The flap stays in his place!
I recomend you guys to buy this to solve the problem, at least it helped me.
In case you buy, I used swiss post, it take a long time but it was secure. This was the first time I buy someting from another country (Im from Mexico, btw sorry for my english hehe)
Remember, here is how to remove the flap https://www.youtube.com/watch?v=xzXmsgNP2Eg&app=desktop
Hope this time I really helped! Good Luck!
PD: Now im going to use my magnetic charger so I dont have to move the flaps, I suggest you the same!**
Enomine said:
Everybody must try this! Remove the flap then try to put it back in its place. Im going to buy a new one in future (just in case). Here is a video I found, it shows how to remove the flap https://www.youtube.com/watch?v=xzXmsgNP2Eg&app=desktop
Its working for me!! But im still testing (I guess im going to start to use my magnetic charger more often)
"thanks" if I helped
Click to expand...
Click to collapse
Thanks, must be the flaps have been twisting too much and it was trying to twist back or something which made it push off.
Taking it off and putting back in fixed it 100% for me, just ordered a magnetic charger though. Dont wanna remove and put it back in every month.
Thanks so much for your post, I used a wall pin and de-dusted my flap and it no longer wants to keep opening.. It was quite surprising how much was actually there
Thanks again!
You could buy a new one from internet (ebay, amazon, etc) or clean it
pr0jesse said:
You could buy a new one from internet (ebay, amazon, etc) or clean it
Click to expand...
Click to collapse
Buying a replacement isn't so easy, well it is, but 99% are copies unless they have been pulled from old phones now. Most if not all the reviews condemn these replacements as poor quality and unfit for purpose. I have recently lost my micro USB cover and am waiting on delivery of a "copy" port replacement. Cost just under £5 for a pair of covers. Could of got some second user official ones for £7 but I thought I'd take the risk with the copies.
As for cleaning I just use ear buds/Q tips to collect the lint/dust.. anything sharp will only compromise the water proof nature of the seal.
I have had my Ultra Z since January. Zero problems, but this morning I removed my USB charger at work and a rubber gasket (see pic) fell out. Now the door does not close properly. I have the gasket and tried to work it back in but it would not go. There is a small tab and I cannot tell if it goes up (towards the screen) or down. I think I can get it back in with a toothpick or similar but want it to stay (and not lose it) and for it to re-seal the door properly. Not being able to close the USB door is a BIG deal to me.
I had been meaning to get a docking charger but bought some from China and they were crap. Guess I'll have to break down and get a real DK30.
The o-ring goes on the door.
Tab to back by the looks
Glue it back? What kind of glue?
Sent from my C6833 using XDA Free mobile app
mknewman said:
Glue it back? What kind of glue?
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
Try crazy glue very very small amount and please let it dry fully before putting the cap back into the phone!!!
Jammol said:
Try crazy glue very very small amount and please let it dry fully before putting the cap back into the phone!!!
Click to expand...
Click to collapse
Thanks Jammol. I'll try to figure this out. When I place it in the position it appears to belong in (now that I look closely I can see the small tab indention on the cap) but the part is so small I cannot even handle it with my big fat fingers, and don't really have a magnification station and stability setup to do it.
Big question is for the people who have had the cap break off, is there a source for the whole cap? Is it possible to install without taking the whole phone apart? Would it make sense to just throw it away and forget it was there?
mknewman said:
Thanks Jammol. I'll try to figure this out. When I place it in the position it appears to belong in (now that I look closely I can see the small tab indention on the cap) but the part is so small I cannot even handle it with my big fat fingers, and don't really have a magnification station and stability setup to do it.
Big question is for the people who have had the cap break off, is there a source for the whole cap? Is it possible to install without taking the whole phone apart? Would it make sense to just throw it away and forget it was there?
Click to expand...
Click to collapse
I don't know what part of the world you are in but you can check these out. Couple folks have bought them:
http://www.ebay.de/itm/Original-Son...zer_Ersatzteile_Werkzeuge&hash=item2339fdd95e
I say just replaced the entire cap with one of those and call it good. Mine is experiencing the same thing, tearing off little by little. I think that is where water might be getting into my phone, but I'll be replacing the phone soon anyways. Just not sure what to get yet.
I have not gotten mine wet yet other than rain in my pocket but the lines are much better with the cap on than removed, and I'd worry about the edge material getting pulled off the rest of the phone. I appreciate the ebay refrence and will try to find a US version. So is there a way to remove the old cap without breaking it off internally and having the tab rattling around inside?
I ordered a couple of the caps and a magnetic charger off thEbay US, but seller was in Spain so it will be a while. Crappy design trying to get rubber to adhere to plastic.
Does anyone know how to safely remove the old one? Just yank? slip something very thin in to try to get the tab to ride over the notch?
Thanks,
Marc
Super glue is what bonds o-rings to other materials because of the greasy slippery surface. Mine has also come loose. Contact glue, industrial glue or anything else wont bite on that thing because of its chemical resistance that the o-ring has.
try to get a hold of a bottle of Loctite 401 meanwhile if you can't wait for the parts
http://www.ebay.com/itm/LOCTITE-401...Instant-Adhesive-Super-Glue-20g-/121407567300
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Apply with a pin or paper clip I take it?
SÜPERUSER said:
Super glue is what bonds o-rings to other materials because of the greasy slippery surface. Mine has also come loose. Contact glue, industrial glue or anything else wont bite on that thing because of its chemical resistance that the o-ring has.
try to get a hold of a bottle of Loctite 401 meanwhile if you can't wait for the parts
http://www.ebay.com/itm/LOCTITE-401...Instant-Adhesive-Super-Glue-20g-/121407567300
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Click to expand...
Click to collapse
mknewman said:
Apply with a pin or paper clip I take it?
Click to expand...
Click to collapse
mmm something like that I dunno really.. I've yet have to figure this out myself lol. Use your imagination! :laugh:
At my moms work when I was young they had superglue bottles from loctite with really tiny metal pipes attached on them I wonder what loctite model that is. They could be used to do any precision work!
So it's possible to get the new one in properly once I get the old one out? From this picture it appears the new tab should slide in but I'm worried if you have to tug hard to get the old one out.
SÜPERUSER said:
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Click to expand...
Click to collapse
calm down...just pull on it. You won't break anything
edit: its no big deal to get the new one in
Great! Thanks, that's a relief. I'll let ya'll know how it goes when I get it. May buy a few extras too.
I got the replacement parts from thEbay tonight. Pulled on the old one and it came right out. Took 2-3 tries to get new one in. Tether was bunching up. Turns out if you hold it at about 45 regress it goes right in.
Thanks for the help everyone.
Sent from my C6833 using XDA Free mobile app
gutted!
I am so gutted i didn't see this thread before I sent my phone to Sony for warranty repair.
My gasket didn't fall off, it started to come unstuck so was hanging off and when closing the lid the gasket would unroll and the lid would open.
I sent it to Sony as I think this is there fault. The gasket should stay attached for the duration of the warranty.
They want to charge me £55 for repair, handling and shipping!! I have had my claim escalated and now they say 'upon further inspection the device is bent'!! They are willing to send it back free of charge should I not want to have it repaired...... But should I now expect the device they send back to me to bent when I know full well it was in near perfect condition when I sent to them?!?!
The bottom line is follow instructions from this thread. DO NOT send your phone to Sony.
Sony use 'authorised repair centres' so they don't even know what is going on with your device and the trust you put in Sony to give your device to a respected engineer is misplaced.
Yep. Kid got a hold of it before case arrived. Yes its my fault. Should have kept better eye on him. There are only two bids on YouTube. Neither one is great. I see on eBay they have LCD and digitizer and housing. From vids it looks easy. But would like to hear from anyone who has done it. Thanks
So sorry for the breakage. Here is a video that seems pretty good, https://www.youtube.com/watch?v=qm6NwBvo6T0. The process doesn't seem to hard, to me. Good luck.
kimtyson said:
So sorry for the breakage. Here is a video that seems pretty good, https://www.youtube.com/watch?v=qm6NwBvo6T0. The process doesn't seem to hard, to me. Good luck.
Click to expand...
Click to collapse
I recently replaced the LCD screen on a OnePlus One, other than the size, it was almost identical to the Mate2. couple parts in different spots but it had enough of those #%(@!)% rice grain size screws that I put them on a magnet, to make sure I didn't lose them.
Yes. That is one of the vids I was talking about. The other one was actually for a mate. Not mate 2. The thing I don't understand on this video is he never actually gets to the part of the screen replacement. So, I am presuming that with this phone as long as I purchase the LCD+digitizer+frame. Then it will just be a matter of putting all the parts including board back in to it. On eBay there are choices. You can purchase just the glass or glass and digitizer or those plus what they call the frame. While on my phone. Only the outside glass is broken. I am going to buy the kit that has all three. I would give just replacing the glass a shot if I could find a video or tutorial. I have looked everywhere. Nothing. The closest thing I could find is the vid on youtube of the guy changing just the glass on his mate. Unfortunately, he never says a word in that vid. I guess it's just to show it can be done. I'm really stressed by all this. I would prefer to just change the glass if only I could find some info. I presume it is like a Samsung where glass is glued with local to digitizer. I have fixed those type on a s3 and note 2. Was not that hard. Just be sure to heat properly and don't scratch digitizer. With no idea of how it is done on this phone. I guess I will get the kit and hope for the best as of course. It has to come from China. Waiting....Thanks for the info and I will do my best to make a vid so others can learn from my mistakes? Lol or hopefully success.
Have a hair dryer or a heat gun handy just in case. On the OnePlus, the screen is "glued" somewhat, to the plastic frame. It is a LOT easier to separate if you heat is up a
bit. Just heat one side, then you the (as I like to call it) guitar pick tool to start to pry it up, then to a little more at a time, so you don't overheat the broken screen.
After you get the screen off, make sure you scrape around the edges of the frame, to ensure you remove any sticky residue. You don't need to heat up the new screen. Once you press it down, it will stick quite well.
If it were me I would get the entire kit and be done with it. There is too much that can go wrong with the hairdryer and peeling the old, broken screen from the digitizer. With the kit, it's just all screws and dismantling then put it back together. Much easier.
I hope that is right about the kit. The thing that scares me is what will the quality of the parts be like? I know my digitizer is fine. So I'm going to try the kit first. If it fails due to bad parts. Then I will still have the option of just doing the glass. The cheapest I saw for the glass was 18.00 bucks. The kit with shipping was 58.00....Not really a huge difference. Again its the quality of the parts that scares me. Of course the vid on youtube makes it look easy. But I'm sure he is doing it on a phone that has been torn down a few times. Its always easier then. As I said. I intend to video all this. If nothing else. There will at least be more info available to poor suckers like me..lol. Will see in a couple weeks if the Chinese ship time holds true...
I'd bet the quality is the same as OEM.
Sent from my MT2L03 using XDA Free mobile app
One other thing. Just wanted to ask. You say the one plus is about the same? Are you saying that because there similar in how their made? Or do you know something about where their made. Thanks for the info on the glass. I have done it on Sammy phones. Has to be similar. Kit is already coming. So I'll go that route first try. Wish your repair had been on a ham2. Then I would feel better. I guess I get to go first. Lol
kimtyson said:
I'd bet the quality is the same as OEM.
Sent from my MT2L03 using XDA Free mobile app
Click to expand...
Click to collapse
The one I ordered for the OPO looked identical, except the routing for the lcd screen connector was just a little different, but in no way caused a problem.
I wanted to update you guys on how the repair of my screen is going. I have some info to share and trust me. It is important if you ever need to DIY on this phone. Most are aware of the video on youtube. Ive watched it several times and I always got the feeeling it looked to easy. Well, my screen and dig assy came in today. I was going through the process of tearing it down and everything was going well. Untill i got to the part where you remove the power button cable. The one that runs along the side of the phone. I SHOULD HAVE KNOWEN. In his vid. He makes it look like this cable will come off with gentle pressue. BULL****. It wont. It is glued Tight and you will just winde up tearing it. I am so pissed. I wish he would have just said to buy the cable with the kit. Its 10 bucks on ebay of course. So, now I have a torn down phone waiting for the cable. I was making a video of the repair. When the cable comes in. I will finish it and upload to youtube. The other thing he makes look easy is the removal of battery. Again, its not and you could damage it too. But I managed not to. Anyway i am really upset right now so sorry for cussing. I want to find that dude and shake his hand and smack him at same time...
pckarma112 said:
I wanted to update you guys on how the repair of my screen is going. I have some info to share and trust me. It is important if you ever need to DIY on this phone. Most are aware of the video on youtube. Ive watched it several times and I always got the feeeling it looked to easy. Well, my screen and dig assy came in today. I was going through the process of tearing it down and everything was going well. Untill i got to the part where you remove the power button cable. The one that runs along the side of the phone. I SHOULD HAVE KNOWEN. In his vid. He makes it look like this cable will come off with gentle pressue. BULL****. It wont. It is glued Tight and you will just winde up tearing it. I am so pissed. I wish he would have just said to buy the cable with the kit. Its 10 bucks on ebay of course. So, now I have a torn down phone waiting for the cable. I was making a video of the repair. When the cable comes in. I will finish it and upload to youtube. The other thing he makes look easy is the removal of battery. Again, its not and you could damage it too. But I managed not to. Anyway i am really upset right now so sorry for cussing. I want to find that dude and shake his hand and smack him at same time...
Click to expand...
Click to collapse
I have worked on several phones. None are easy really. Most all companies use some type of adhesives. Alot glue the batteries in as well. Dunno if you tried it but heat seems to help with the glue. Seen a guy do it with a hair dryer. Worked for me as well with a screen replacement. Never took one of these apart so I have no idea if they use heat activated glue or not. Good luck!
Well Thanks for reply. I too have fixed a few. As long as I have something to guide me. Im Cool. Vid or written indtructions. Yes all phones use some sort of glue. With this one on the cable. Heat would not have helped. You would just melt the cable. I was expecting some adhesive. But not like this. This was not meant to be reused. Period. Thats my point. I wish he would just have said buy the cable. No way it is coming off in one pc. The speaker is also glued down extremely tight. I think I got it. Its still in one pc. Interesting enough. There also on ebay.
I really just want people to know about the power cable. If you have to replace screen on this phone. Get one. Your gona need it. Now it may be middle of july by the time I get the cable. I went ahead and tore everything else out of phone. Tomorrow I will put all back into new assy. But i wont know if it worked till cable gets here. I forgot to record taking out the other pcs. I was just to stressed. But I do have some good vid for most of it. Gripe is now over. il be back when cable gets in...
pckarma112 said:
Well Thanks for reply. I too have fixed a few. As long as I have something to guide me. Im Cool. Vid or written indtructions. Yes all phones use some sort of glue. With this one on the cable. Heat would not have helped. You would just melt the cable. I was expecting some adhesive. But not like this. This was not meant to be reused. Period. Thats my point. I wish he would just have said buy the cable. No way it is coming off in one pc. The speaker is also glued down extremely tight. I think I got it. Its still in one pc. Interesting enough. There also on ebay.
I really just want people to know about the power cable. If you have to replace screen on this phone. Get one. Your gona need it. Now it may be middle of july by the time I get the cable. I went ahead and tore everything else out of phone. Tomorrow I will put all back into new assy. But i wont know if it worked till cable gets here. I forgot to record taking out the other pcs. I was just to stressed. But I do have some good vid for most of it. Gripe is now over. il be back when cable gets in...
Click to expand...
Click to collapse
With any luck you may save someone else a headache!
pckarma112, so sorry for your frustration. Thanks for sharing your experience.
I was going to suggest the the same thing as Moody. Heat from a hair dryer usually helps soften the glue but isn't enough to destroy anything (usually).
Just so we are all understanding, can you show a pic or provide a link of what you purchased? Was it just a screen or an assembly?
Again, sorry for your issues. Hang in there.
Parts
Yes I can. That is if I can post links. So Il try. This is the link for the power cable: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemVersion&item=291410104104&view=all&tid=1181571120019 This I just ordered yesterday. The deleivery is anywhere from middle of July to second week of August. Im keeping my fingers crossed that I got a good vender and will get a good one. They say they have already shipped it and gave me a tracking number. But the number is not showing up yet. Ive seen this before with china stuff. I will give it a couple days and check again.>... The next one is for the screen kit: http://www.ebay.com/itm/141653108269?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT > Cant say enough good things about this vendor and kit. It looks and feels outstanding and I recieved it in two weeks from china. That is pretty darn good. Now, the only thing is since I have no power cable. I do not know for sure if I got a good one. But, like I said. It feels like a quality part. The last item is a phone repair kit that really helped with this job. The metal and plastic spudger really helped with battery and other small parts like camera and vibrator. For the price I suggest you get one. Here it is: http://www.ebay.com/itm/111501320079?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
As for the screw driver. Dont do what i did. I bought a cheapo 1.69$ one. It was crap. Lucky for me. I had one from a previous kit I bought and it worked fine. Hopefully these links will show up for you guys. If not I will try with a different browser.
Just so its clear. I do have a hair dryer that I keep for samsung screens. I thought about trying it on the cable. But I have worked on these kind before. There is a really fine line between warming the glue and melting the cable. This sucker had enough glue to hold the hoover damn together. Ive seen it before and Im pretty sure you would melt cable before the glue would give away. Thanks you guys for advise and just letting me vent. I do hope that anyone who attemps a repair can learn from my mistakes....lol. Thanks again.
I've been taking stuff apart and SOMETIMES successfully getting it back together for over 40 years, sometimes with the odd screw leftover, but hey, where do our extra screws come from eh?
I replaced the screen on the OnePlus for a friend a couple months ago and WOW, they need to make these screws JUST a LITTLE smaller, don't you think? I find that keeping a small magnet on hand comes in handy to keep track of those tiny a** screws.
pckarma112- Nice job on the post of Parts. Only problem is the first link failed. Said it was too old. Again, thanks for sharing and letting us learn from your mistakes.
Thanks for the *cough* compliments. The link is bad because seller is sold out. However, you can try this one:http://www.ebay.com/itm/111501320079?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT......If that does not work then there is this:http://www.ebay.com/itm/Black-LCD-D...412?pt=LH_DefaultDomain_0&hash=item3f3f160554 This is same only black. Again, these people really treated me well. Im sure there will be new auctions when he restocks. There are also plenty of others. Price varies a little. Im really delighted that you find small screws to be a pita. Thats just awsome. lol Keeping a piece of tape on the table really helps. Just drop them on to the tape and I promise you will never lose another one. I would really like for this thread to be helpful to anyone that gets unlucky. So, I am trying to be ernest about it all. That includes honesty with no hidden attitude. When I say thanks. I really mean it.
By the time and god willing the power cable arrives. I will hit the big 60. This will not be the last phone I ever repair( I hope). But it sure has been one of the most interesting. Thanks again guys and may your screws never be loose.
Thanks
p51d007 said:
I've been taking stuff apart and SOMETIMES successfully getting it back together for over 40 years, sometimes with the odd screw leftover, but hey, where do our extra screws come from eh?
I replaced the screen on the OnePlus for a friend a couple months ago and WOW, they need to make these screws JUST a LITTLE smaller, don't you think? I find that keeping a small magnet on hand comes in handy to keep track of those tiny a** screws.
Click to expand...
Click to collapse
Thank you. You gave me a good laugh and it was much needed today. In fact. Its needed everyday in this world. The kit of screw drivers that I own are indeed magnetized. Thank God. Seriously though. If you think these are small. Try repairing a watch. Now your talking micro. I have worked on about a dozen or so with my brother. He is a master clocksman. Makes good money still and when ever he needs help. I get to learn from him and make a little too. So, Im blessed. I also lost track of where a couple screws will go on this phone. But, got it figured out. It is nice to know that none of us are perfect. Thanks again bro.