Related
CAn help me Anybody?? with:
HTC Legend USB BRICK Without Root, Any SOlution??
Im sure someone found out a solution. Keep searching the xda forums. You may have to go beyond the Legend community
But Im dead sure I have read it...bit complicated but it worked for the poster.
genzalo said:
CAn help me Anybody?? with:
HTC Legend USB BRICK Without Root, Any SOlution??
Click to expand...
Click to collapse
If you still have warranty - claim it.
If not - u can try this http://forum.xda-developers.com/showpost.php?p=9889284&postcount=60
genzalo said:
CAn help me Anybody?? with:
HTC Legend USB BRICK Without Root, Any SOlution??
Click to expand...
Click to collapse
Do it all from here [HOWTO] USB Unbrick.
Only one thing you need more to do.
After
Code:
fastboot oem boot
your phone will start normally.
Download and install -- VISIONary, then starts and select 'temproot now', then you can continue with the instructions from point 2, 3, and etc.
Sorry for my bad English
HpX said:
If you still have warranty - claim it.
If not - u can try this http://forum.xda-developers.com/showpost.php?p=9889284&postcount=60
Click to expand...
Click to collapse
Doesn't work, my pc reconoigze the phone like an unknown device, and sdk still is waiting device, any other solution??
genzalo said:
Doesn't work, my pc reconoigze the phone like an unknown device, and sdk still is waiting device, any other solution??
Click to expand...
Click to collapse
Il look into it, and come back to u..
Btw: do use Windows, OsX or Linux?
Ps, can a mod move this thread to general..
I send you a private message with instructions.
Io4 gave you a good answer to solve the issue in the post 4.
Greetings.
HpX said:
Il look into it, and come back to u..
Btw: do use Windows, OsX or Linux?
Ps, can a mod move this thread to general..
Click to expand...
Click to collapse
I use WIn7 32bits or WinXP 32bits. I probe in 3 pcs
Hey....
I had the same problem.....
What i did is:
I removed the cable
Booted into bootloader
went to fastboot
and connected the usb
After that, my pc detected some device...not the the mom card or phone...
Again after that, i booted into bootloader, connected the usb, and went to recovery...it went to the screen with the phone and the exclamation, and the pc made 4 or 5 connected and disconnected sounds...
I then powered the device on, and lo and behold! It recognized my phone and everything was back to normal...
This is just something that worked for me, as i was in a USB brick...prior to this, i was not able to connect to the pc, and the charger was not fluently or continuously charging the phone.
Hope this helps someone....
Cheers
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Sorry forgot to mention this was a verizon branded note 2
achiquitachaser said:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Click to expand...
Click to collapse
I guess no one has an idea of where to go with this now?
achiquitachaser said:
I guess no one has an idea of where to go with this now?
Click to expand...
Click to collapse
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
sangalaxy said:
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
Click to expand...
Click to collapse
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
achiquitachaser said:
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
Click to expand...
Click to collapse
yea sometimes it will not recognize anything and will not show on screen but will work silently
did you tried connecting it to pc without battery as I said and go to download mode by pressing buttons may be odin will recognize
if not you don't have any choice but go to samsung
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
achiquitachaser said:
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
Click to expand...
Click to collapse
ok friend hope it gets fixed
First off,i would like to apologize for being such an amateur.This is my first post on this forum,so don't get angry on me for breaking some rules (forgive me im new ,idk if i should post this here or somewhere else,don't worry i will be polite ).Anyway as the title says,im having a bit of a problem,or to be more precise a huge one.
So lately i was trying to root my phone,Huawei U8500 which was so buggy,so i decided to root it,install cwm and flash a new ROM.But the problem is i can't get it rooted.I've tried many methods from XDA but none of them worked.Z4 root loads until it displayed acquiring root access,and then the app crashes (closes itself).I've tried Framaroot,but it didn't work either.It said 'try another exploit',but the thing is it displayed me only one.I also tried poot.apk,but it also failed.Telling me '(-) can't get a handle on it:-1 Permission denied'.
(note that all the time my USB Debugging was enabled ! ) All of the apps are at latest version!
So after so many failed attempts with pc-less methods i've decided to try a PC one.The first method i used was Superoneclick,which didn't work.I thought that was because the phones model was not supported.All until a friend of mine told me that he rooted his phone using the same program (he has as well huawei u8500).Every time i try to root with superoneclick it is stuck at the second step(as in screenshot).Then i started googleing and google-ing,until i found a thread with a program called SRSroot,thinking it will safe me from this nightmare that is haunting me for days.But it failed again.The program told me 'ADB Device not found',which made me think about checking the drivers.I've installed the google usb drivers and SDK Manager with all drivers.But still the same happens.So i decided to see if my computer(later many others) recognize my device.After i typed in ADB 'adb devices' it showed me blank.Later i tried to do the same with my other phone and it displayed the device.Another thing i've noticed lately is my computer sees my device as a cd device in windows device manager.It happened with all computers i tried. I've tried it also at my friends(plural,which means more computers).I've tried it on Win7,win XP,and WIN8 and it is still displayed as cd drive.(which is not the case with other phones i've tested!)
I hope someone will read this and help me.I would also like to add, this is not my first time rooting,so i knew what i was doing.
Im so confused,idk what to do,developers pls HELP ME!!!
I will also post screenshots from all the things mentioned above.Hope this helps you figure out the problem
On the adb devices, are you sure it is setup correct, because it needs a set of rules basically. I don't have time right now. But if you search 'adb' in the xda portal (not forum) you will find a windows universal adb installer. That should fix the adb issue. But apart from that I don't know what else you can do.
Sent from my ST18i
tried
Guynan said:
On the adb devices, are you sure it is setup correct, because it needs a set of rules basically. I don't have time right now. But if you search 'adb' in the xda portal (not forum) you will find a windows universal adb installer. That should fix the adb issue. But apart from that I don't know what else you can do.
Sent from my ST18i
Click to expand...
Click to collapse
I did what you said,but the problem is the same.The rest of my phones get recognized as androids,but only this unique Huawei is recongized as CD-Drive,pls anyone help?
Here i took a screenshot after trying to update "cd drive''
Beatit123456 said:
I did what you said,but the problem is the same.The rest of my phones get recognized as androids,but only this unique Huawei is recongized as CD-Drive,pls anyone help?
Here i took a screenshot after trying to update "cd drive''
Click to expand...
Click to collapse
Gosh that is so confusing. Could you reset your phone or do you have data you want to keep? Because you could perform an ADB backup and try a factory reset and hope that all is righted.
I did factory reset,i also did hard reset,but still nothing works
Guynan said:
Gosh that is so confusing. Could you reset your phone or do you have data you want to keep? Because you could perform an ADB backup and try a factory reset and hope that all is righted.
Click to expand...
Click to collapse
Already did it,still the problem persists.Anyone here have any idea?
Beatit123456 said:
Already did it,still the problem persists.Anyone here have any idea?
Click to expand...
Click to collapse
Short of a new phone, I got nothing. Unless you could get into a recovery, try format the system, causing a brick, flash a 2.3 ftf and then a 4.04 after that, clearing data each time.
pls read my question thoroughly
Guynan said:
Short of a new phone, I got nothing. Unless you could get into a recovery, try format the system, causing a brick, flash a 2.3 ftf and then a 4.04 after that, clearing data each time.
Click to expand...
Click to collapse
Since im unable to root my phone,i can't flash a custom ROM.I'm trying to root but no success,pls some1 help????
Dear all,
I need your help .. My new hTC One max died on me last night when i was trying to play with its partition ..something may have gone wrong and when i tried to boot it dang!! NOTHING !! its like the phone is completely lifeless !!
I have tried all the tricks that are mentioned here in this forum :
1) I have already tried the Bright light trick
2) have tried all the button combos like power button plus volume down or volume up or all three at the same time .
3)Even tried to put into freezer for couple of minutes but nothing !!
When i connect to my computer , my pc recognises itwith a sound ..and in the device manager i can see the listing by the name of Qualcomm ....
It has no warranty as i purchased it from a friend who lives abroad ..
Please help guys as i stay in a remote area where there is no access to service centres ..and its my first smartphone guys ..
Does it recognize it in adb?
Wired0980 said:
Does it recognize it in adb?
Click to expand...
Click to collapse
No sir .. I have tried with adb ..but it said no device found !
shaan202 said:
Dear all,
I need your help .. My new hTC One max died on me last night when i was trying to play with its partition ..something may have gone wrong and when i tried to boot it dang!! NOTHING !! its like the phone is completely lifeless !!
I have tried all the tricks that are mentioned here in this forum :
1) I have already tried the Bright light trick
2) have tried all the button combos like power button plus volume down or volume up or all three at the same time .
3)Even tried to put into freezer for couple of minutes but nothing !!
When i connect to my computer , my pc recognises itwith a sound ..and in the device manager i can see the listing by the name of Qualcomm ....
It has no warranty as i purchased it from a friend who lives abroad ..
Please help guys as i stay in a remote area where there is no access to service centres ..and its my first smartphone guys ..
Click to expand...
Click to collapse
can you please define "i was trying to play with its partition"? What did you do exactly? Can you post a screenshot of windows device manager when your phone is connected to your pc?
alray said:
can you please define "i was trying to play with its partition"? What did you do exactly? Can you post a screenshot of windows device manager when your phone is connected to your pc?
Click to expand...
Click to collapse
Sir , I was only trying to create a second partition using some app from play store .. i was then asked to reboot to recovery by that app and then from there when i tried to reboot it went dead!!
I have attached a screen shot of the same ..please have a look
So when you hold the volume up and power button for like 3 minutes your home and back button don't flash?
When you plug it in to wall charger does the charging indicator led light up?
You could try this idk
http://forum.xda-developers.com/showthread.php?t=1627882
shaan202 said:
Sir , I was only trying to create a second partition using some app from play store
Click to expand...
Click to collapse
Why? Dont mess with the partitions!
I have attached a screen shot of the same ..please have a look
Click to expand...
Click to collapse
Your phone is in qhsusb dload mode which mean its bricked. I dont know for the one max, but there is a fix for the one M7 (similar to the other one posted above). This is your only hope.
http://forum.xda-developers.com/showthread.php?t=2770684
alray said:
Why? Dont mess with the partitions!
Your phone is in qhsusb dload mode which mean its bricked. I dont know for the one max, but there is a fix for the one M7 (similar to the other one posted above). This is your only hope.
http://forum.xda-developers.com/showthread.php?t=2770684
Click to expand...
Click to collapse
I am stuck ..one of the command says ' command not found ''
I have booted into linux and followed every steps ..and then now i am stuck in the command where it says command not found - ' sudo./revive '
pls help.
Pls help!
I'm not thinking it will run "revive.sh" if the script is not in the same directory
shaan202 said:
I am stuck ..one of the command says ' command not found ''
I have booted into linux and followed every steps ..and then now i am stuck in the command where it says command not found - ' sudo./revive '
pls help.
Pls help!
Click to expand...
Click to collapse
I don't think the script will work anyway. It is not designed for your phone variant. You might want to ask dexter93 in his thread, if he can help you with that.
It would need edited to support this phone and the correct firmware zip and mount points modified but I don't see why it would not work. I have looked at this script and how Emmc recover works.
Hello Everyone,
I have a questions and hopefully some one can help me out here. My son has bricked my phone and I believe it is a soft brick... could be wrong. However, I need to find away too unbrick it.
I can get into hard reset with out issues. however with everything I do, I can't get into recovery what's so ever. The phone just hangs at the loading screen. I have talked to my son in order to find out what he did and this is exactly what he told me
He installed king root and attempted to replace-kinguser-with-supersu. However when he installed the application, it asked to reboot the phone. Well he rebooted the phone and now it is stuck at the loading screen and wont go any further than that. He also told me that he did not remove kingroot prior too the reboot. Please help! as I need my phone for work.
I am out of options on what too do. I would post the guide he used but I am limited due too the spamming regulations of the board.
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Lunarman01 said:
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Click to expand...
Click to collapse
According to the good people here on this thread http://forum.xda-developers.com/general/general/qa-metro-pcs-lg-k7-lgms330-t3331678 there is only a paid solution at the moment.
http://lg-firmware-rom.com/download...330-dll-for-lg-up-unbrick-lg-k330-with-lg-up/
if it is a lg k7 k330 (tmo) i followed this guide http://www.repairshopusa.com/phone/lg-k7-k330-unbrick-method/
Thank you for the information. However the lgup application does not recognize my phone. Indicates that the model is "Unknown"
Guess i am out of luck lol
Not uncommon. Sometimes you need to unplug and replug the device back in or close and reopen the program.
Thank you for the information. Does the USB debugging option need to be enabled because if it does, I don't think it is as the my computer does not recognize my device at all. Under computer, it shows as k7. However when I got into the device manager it indicated "LGE Android MTP device".
No. USB Debugging only works while booted into the system or recovery. You must be in Download Mode for the LG Up tool.
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Lunarman01 said:
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Click to expand...
Click to collapse
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
es0tericcha0s said:
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
Click to expand...
Click to collapse
Yes you are correct. However the file that I have downloaded from the link below doesn't actually provide you with a kdz file. The file provided you the files that have been extracted from the kdz file, which are the (LGK330.dz) file
Ah, weird. Never worked on an LG that didn't use .tot, .kdz, or .bin files. I guess just search for *.dz and it should load according to the link the other guy put up.
peteypete206 said:
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Lunarman01 said:
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Click to expand...
Click to collapse
i'm having same problem in device manager , LGE android mtp device (yellow triangle with exclamation) & LGUP says device unknown.
The phone is able to go in download mode. any help will be appreciated.
I have a hard bricked k7 (k330) CHIPSET MSM8909 qdload 9008 with no partition, the solution I found here was for LG G2 & G3 because the diag program has those chipsets, please I need help with this
peteypete206 said:
Message me I can fix your phone
Click to expand...
Click to collapse
How's it going man, I need your help I have a ms330 stuck in 9008 mode with an unlocked bootloader. Everything I've tried has failed and I'm stuck. I only owned this phone for 6hrs before I screwed it up any help will be appreciated!!