TWRP 3.0.2 for Samsung Galaxy [email protected] J5(2016)Description:
Bugs
- Brightness slider
- PC mounting MTP (but adb should work)
__________________________________________________________________________________________________
INSTALLATION(Instructions)
Code:
1. Install device usb drivers and Odin
2. Power off the device.
3. Boot to download mode (VOLUME DOWN/HOME/POWER).
4. Volume UP once.
5. Open Odin as an administrator, connect the device to a usb port,
and make sure a blue button appears and says "Added" in description on the left.
6. Select AP or PDA for older Odin and search for the downloaded tar file.
7. Uncheck auto reboot from the second tab.
8. Start flash and you should see the succeeded command.
9. Unplug the device and long press POWER until it powers off or remove the battery.
10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).
Many thanks vaibhavpandeyvpz!:good:
Tested model SM- J510H(FN)@ J5(2016) for other models not yet verified
ROOT J510 ( tested model J510H / J510FN / J510F / J510GN )
Flash zip SU
https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
___________________________________________________________________________________
Ver / TWRP 2.8.7.0 fix
http://forum.xda-developers.com/showpost.php?p=68624038&postcount=28
Nice Bro!! Thank you for your work
Btw does it works in my J5108 lollipop 5.1.1? :highfive:
Recommended Installation Flow:
Flash TWRP via ODIN
Reboot to Recovery (TWRP)
Flash latest SuperSU zip (anything > 2.46)
Deleted
Got Root !::good:
All thanks vaibhavpandeyvpz!!!:good:
That's great!
A huge step forward in the development of SM-J510
Thank you Bro! ????
Me too.
Got Root access on SM-J510GN. Thanks for the great work!
Deleted
Hi guys,
Just tried it on SM-J510GN, but flash failed:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?
andre6b said:
Hi guys,
Just tried it on SM-J510GN, but flash failed:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?
Click to expand...
Click to collapse
Bro have you enabled USB Debugging in Developer Options in Settings app? It'd be better
Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).
Sent from my SM-J510GN using XDA-Developers mobile app
Yuen.Jason22 said:
Bro have you enabled USB Debugging in Developer Options in Settings app? It'd be better
Click to expand...
Click to collapse
It was off! Well, thanks, will retry now
---------- Post added at 09:22 AM ---------- Previous post was at 09:09 AM ----------
By the way, will Samsung's updates still work after rooting?
andre6b said:
It was off! Well, thanks, will retry now
---------- Post added at 09:22 AM ---------- Previous post was at 09:09 AM ----------
By the way, will Samsung's updates still work after rooting?
Click to expand...
Click to collapse
OTA updates probably won't, I guess
If you have already flashed TWRP recovery, then KNOX counter would have been triggered and no updates and warranty from Samsung. :crying:
But you can always flash new Samsung firmwares via Odin
just go to Samsung firmwares website and search for your model number and download the new updates manually
Hi
There is some bug in this recovery,
After I install it, when I tried to make a factory reset from the settings, the phone keep booting to recovery again and agian after the wipe. even if i choose reboot>system in twrp it keep rebooting into recovery, until I flashed the stock recovery again.
Can you fix this problem please? my device is J510FN.
Thank you very much!
Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me . Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?
Huee said:
Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me . Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?
Click to expand...
Click to collapse
Once you tripped KNOX to 0x1, it would be recorded at a E-Fuse which permanently marked that you have void the warranty. Samsung customer service centres would refuse to repair your device
I tried this methid and installed recovery image sucessfully. But after flashing Superuser.zip my phone stuck on Samsung logo. My model is J510FN. What may cause the problem. Any help is apprciated.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
XtremeX said:
Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).
Click to expand...
Click to collapse
Tried it all. Stuck on Samsung Animation after flashing superuser.zip
Will this trigger the knox counter on the phone?
cilmanalo said:
Will this trigger the knox counter on the phone?
Click to expand...
Click to collapse
Of course flashing TWRP via Odin will trigger Knox 0x1 then no warranty
Yuen.Jason22 said:
Of course flashing TWRP via Odin will trigger Knox 0x1 then no warranty
Click to expand...
Click to collapse
Oh that's unfortunate. Will flash after warranty then haha
Related
*** I AM NOT RESPONSIBLE FOR YOU DAMAGING YOUR DEVICE IN ANY WAY. THIS METHOD OF ROOT IS TESTED BY ME ON THE DEVICE SM-T230/T230UN.. ***
THE SM-T230 HAS NO KNOX AND THEREFORE WONT TRIP ANYTHING
THINGS NEEDED
> TAB 4 WIFI SM-T230/T230UN WITH USB DEBUGGING ENABLED AND DRIVERS INSTALLED
> ODIN 3.09 + TWRP 2.8.0.1 BOTH WHICH CAN BE FOUND IN THIS ZIP FILE >> DOWNLOAD
THE GUIDE
1. Download and extract the above zip to an easy to access location.
2. put the device into download mode by holding power+vol down+home and connect to computer with usb cable.
3. now run odin 3.09 (as administrator) and select AP and then select the openrecovery-twrp-2.8.0.1-degas.tar file
4 .hit start in odin and as soon as odin is finished the device turns off for reboot DONT let android boot, quickly press power+vol up+home to boot into twrp recovery
5. now pres reboot > system and then slide to install root
6. when device has rebooted to android open superuser installer app and follow instructions to update then install su binary updates then reboot.
7. now download busybox and install.. (from gplay)
you now have rooted your tab 4 sm-t230/t230un
EDIT: now if you wanted to or needed to you can now add init.d support to your rooted device by following the instructions here
dont forget to use the thanks button
Does this trip Knox I have a 2 year full coverage warranty will I be able to unroot with out Samsung ever knowing???
Smt230 and t230 nu do not have Knox in them at all. Only the carrier versions do. So no it will not trip Knox.☺
Sent from my SM-T230NU using XDA Free mobile app
krakenthor said:
Smt230 and t230 nu do not have Knox in them at all. Only the carrier versions do. So no it will not trip Knox.☺
Sent from my SM-T230NU using XDA Free mobile app
Click to expand...
Click to collapse
So I can restore it without them ever knowing awesome ? you made my day thank you.
---------- Post added at 02:50 AM ---------- Previous post was at 02:22 AM ----------
Inside 4ndroid said:
Firstly i have spent the best part of 5 days searching for a root method on the sm-t230 tab 4 and got no where until about 5 mins ago and just for reference and others i am going to put this guide here..
*** I AM NOT RESPONSIBLE FOR YOU DAMAGING YOUR DEVICE IN ANY WAY. THIS METHOD OF ROOT IS TESTED BY ME ON THE DEVICE SM-T230 IF IT WORKS FOR OTHER DEVICES THEN PM ME AND I WILL MAKE A LIST OF SUPPORTED DEVICES.. ***
THINGS NEEDED
> TAB 4 WIFI SM-T230 WITH USB DEBUGGING ENABLED AND DRIVERS INSTALLED
> ADB TOOLS FOR INSTALLING SUPERSU
> ODIN 3.07 + TWRP + SUPERSU ALL WHICH CAN BE FOUND IN THIS ZIP FILE >> DOWNLOAD
THE GUIDE
1. Download and extract the above zip to an easy to access location.
2. put the device into download mode by holding power+vol down+home and connect to computer with usb cable.
3. now run odin 3.07 and select AP and then select the twrp_2.7.1.0_SM-T230.tar.md5 file
4 .hit start in odinand as soon as odin is finished the device turns off for reboot DONT let android boot quickly press power+vol up+home to boot into twrp recovery
5. now goto advanced > adb sideload
6. now open a cmd on computer and use adb to sideload the SuperSU.zip file
eg, adb sideload location/of/zip/SuperSu.zip
7. twrp will now install supersu and binarys
8. reboot as normal to android and download rootchecker form gplay and check for root also granting root access when asked..
9. now also download busybox and install..
you now have rooted your tab 4 sm-t230
EDIT: while i am currently testing i have just found that certain system app remover apps seem to see the /system as not mounted although this app does work >> System App Remover (ROOT) -gplay
i am trying to work on fixing this with possible workarounds...
dont forget to use the thanks button
Click to expand...
Click to collapse
Does this work on sm-230NU
gonzalezb said:
So I can restore it without them ever knowing awesome ? you made my day thank you.
---------- Post added at 02:50 AM ---------- Previous post was at 02:22 AM ----------
Does this work on sm-230NU
Click to expand...
Click to collapse
You are very welcome gonzaleb. None of the 7 inch tabs carry Knox. And yes the twer root from Odin works on smt230nu also
Sent from my SM-T230NU using XDA Free mobile app
Chnage recovery
Please switch to this recovery the current one in your zip broke when i tried flashing a debloated stock rom this one doesn't.
http://www.reddit.com/r/AndroidQues...hats_the_easiest_method_for_rooting_a_galaxy/
I didn't have any problems but I have added it to the OP than dude..
gonzalezb said:
Please switch to this recovery the current one in your zip broke when i tried flashing a debloated stock rom this one doesn't.
http://www.reddit.com/r/AndroidQues...hats_the_easiest_method_for_rooting_a_galaxy/
Click to expand...
Click to collapse
Could you possibly give me a link to the rom you used so i can test thanks..
Inside 4ndroid said:
Could you possibly give me a link to the rom you used so i can test thanks..
Click to expand...
Click to collapse
Its the only Stock ROM for T230UN on galaxy tab 4 development.
gonzalezb said:
Its the only Stock ROM for T230UN on galaxy tab 4 development.
Click to expand...
Click to collapse
Ok thanks.. i am currently looking into developin a rom for our device only reason i really asked thanks
Inside 4ndroid said:
Ok thanks.. i am currently looking into developin a rom for our device only reason i really asked thanks
Click to expand...
Click to collapse
Awesome cant wait for it yeah when i flashed that i could not get keyboard working at all and Bluetooth broke.
Hey!
I am getting this tab in 3 weeks, is there any "1 click root" method like vroot? If not can someone help me what to type in CMD? (i've installed cwm recovery on other my devices and custom roms too but they were way easier to root with one click methods)
You would need to use v1.0 for now. Safariking is fixing the v1.5 to make it all correct again. Have fun in the meantime folks and a good new year!
Sent from my SM-T230NU using XDA Premium 4 mobile app
Much Easier...
FYI, change step 5 to then reboot system from twrp and choose to root the rom when prompted.
after booting into the OS using TWRP prompts of "play" and "normal" installed binaries and rooted no problems. no sideload or adb necessary.
TWRP handled this all just fine for me.
I also had to use Odin 3.09. 3.07 failed for me 3 times in a row.
(win 8.1/sm-t230un) wifi
I followed the instructions, but after it updated the firmware (first stage), it rebooted and went straight back into the normal OS, no changes.
Now when I try to access the download mode it won't - just keeps rebooting to normal OS.
Anyone any ideas? The Log bit from Odin says the following:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I've attached a screenshot of the ODIN window.
Thanks,
Matt
elation said:
I followed the instructions, but after it updated the firmware (first stage), it rebooted and went straight back into the normal OS, no changes.
Now when I try to access the download mode it won't - just keeps rebooting to normal OS.
Anyone any ideas? The Log bit from Odin says the following:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I've attached a screenshot of the ODIN window.
Thanks,
Matt
Click to expand...
Click to collapse
it sounds like your problem lies with step 4 and 5 after the flashing in odin is complete DONT let it reboot to android... when odin finishes and the tablet turns off and back on press and hold press power+vol up+home until it reboots the first samsung logo at which point let go of the power button and continue to vol up+home until you see TWRP logo now when in twrp just select REBOOT and then SYSTEM after android boots proceed to step 6 and 7 and you should now have root..
Awesome thanks for the help!
You should give credit to the original post as it did from ShinySide. This guide has been around for quite sometime now.
http://forum.xda-developers.com/tab-4/general/root-galaxy-tab-4-7-t230-t2835264
Added: it's still working on the latest firmware.
Can't remember too well: I too let it reboot after odin but no problem going into TWRP (note the difference in combo buttons) and select Reboot and it will has a choice to root. No need to odin again.
Got there eventually, just need to find some decent roms for it now!!
hi, just bought this awesome tab. quick question, where can I download the driver?
I rooted my phone using odin3 then tryed to flash the sdk23 arm64 xposed framework using flashify
Now im stuck on the samsung word logo 'boot loop' and i don't know how to fix it:crying:
Also have a custom recovery [TWRP]
now i think i broke it :crying: i cant get into the recovery mode i dont why but i went to advance wipe and check all of it
also now doesnt do to the samsung word logo it stays on the samsung galaxy s6 powered by android screen
also when charging no green is seen just a empty battery with lighting bolt
plus KERNEL IS NOT SEANDROID ENFORCING in red in the top left corner.
Think i basicallly wiped everything ohno
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
es0tericcha0s said:
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
Click to expand...
Click to collapse
i am able to get to download mode (odin mode right?), now how do i reinstall the original firmware? (maybe link me some steps)
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
es0tericcha0s said:
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on the phone says
SECURE CHECK FAIL : (BOOTLOADER)
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
es0tericcha0s said:
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
Click to expand...
Click to collapse
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed
i used a file G920IDVU3EPEA_G920IXSA3EPEA_G920IDVU3EPEA_HOME.tar.md5
pretty sure its the right one, the sticker on the back of my phone says its SM-G920I
This fail doesnt have the SECURE CHECK FAIL : (BOOTLOADER) on the phone
Also 'An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software' appears on the phone screen
Never Mind i fixed it i just had to use a differnt cable, think my cable was broken.
Cant get into the recovery mode (hold down the volume up, home and power button at the same time) right?
did a factory reset in recovery mode still have a bootloop
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
xKyono said:
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
Click to expand...
Click to collapse
:good::highfive::victory:
Hi All,
I am having a real headache with my Samsung galaxy s6 been bricked, I will explain what happened and what I have done so far
I rooted my phone and installed a custom rom, upon the phone booting up it just boot looped so I tried to flash it back to stock and then the problem started.
I can get in to download mode and when I try and flash a stock rom file it fails at NAND wipe, the phone displays something about SW Rev Binary 4 phone 1, I have managed to flash the modem.bin file and can get in to recovery but that displays another message something like dm verify verification failed.
So now I am at a loss, I have even tried to flash a new pit file but just fails at NAND stage in odin.
Any help would be great.
P.S the phone it locked to o2 so I have tried o2 and the BTU stock roms.
darthlinux said:
Hi All,
I am having a real headache with my Samsung galaxy s6 been bricked, I will explain what happened and what I have done so far
I rooted my phone and installed a custom rom, upon the phone booting up it just boot looped so I tried to flash it back to stock and then the problem started.
I can get in to download mode and when I try and flash a stock rom file it fails at NAND wipe, the phone displays something about SW Rev Binary 4 phone 1, I have managed to flash the modem.bin file and can get in to recovery but that displays another message something like dm verify verification failed.
So now I am at a loss, I have even tried to flash a new pit file but just fails at NAND stage in odin.
Any help would be great.
P.S the phone it locked to o2 so I have tried o2 and the BTU stock roms.
Click to expand...
Click to collapse
Sw rev just shows up because the phone is rooted.
As for dm verity that is your imei messed up.
When flashing a custom rom you must always back up efs files which is your imei.
Its a ball ache reviving messed up imei without efs backup.
What i would suggest is boot to recovery and wipe cache partition, wipe data/ reset. Then try to flash stock again. I would flash 02 stock firmware 1st.
If no luck flash latest BTU firmware with zerolte_eur_open pit.
Post a screenshot of odin if you can
Sent from my SM-G925F using Tapatalk
which PIT file would you say would be best out of these
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
darthlinux said:
which PIT file would you say would be best out of these
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Click to expand...
Click to collapse
It depends which firmware you are flashing? Do not flash a random pit!!
Tell me the firmware and i can tell you the pit
the BTU one for united kingdom
I found the correct zip and tried the BTU firmware and got this
darthlinux said:
the BTU one for united kingdom
Click to expand...
Click to collapse
Zerolte_eur_open
callumbr1 said:
Zerolte_eur_open
Click to expand...
Click to collapse
I have tried this and got this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
darthlinux said:
the BTU one for united kingdom
Click to expand...
Click to collapse
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
darthlinux said:
I have tried this and got this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What firmware are you flashing? G925fxxxxxx?
Try this
http://www.sammobile.com/firmwares/download/90724/G925FXXU4DPGW_G925FBTU4DPH1_BTU/
With this PIT
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Ok thank you I managed to flash this but it stuck in a bootloop again and I have wipe the cache and did a factory reset
Ok scrap that turns out the phone had no charge, so I have charged it up for alittle while and its booted up fine and is working again, thank you so much my S6 is back to normal
darthlinux said:
Hi All,
I am having a real headache with my Samsung galaxy s6 been bricked, I will explain what happened and what I have done so far
I rooted my phone and installed a custom rom, upon the phone booting up it just boot looped so I tried to flash it back to stock and then the problem started.
I can get in to download mode and when I try and flash a stock rom file it fails at NAND wipe, the phone displays something about SW Rev Binary 4 phone 1, I have managed to flash the modem.bin file and can get in to recovery but that displays another message something like dm verify verification failed.
So now I am at a loss, I have even tried to flash a new pit file but just fails at NAND stage in odin.
Any help would be great.
P.S the phone it locked to o2 so I have tried o2 and the BTU stock roms.
Click to expand...
Click to collapse
Did you already managed to fix your S6 edge Sir? Because it's happening to my S6 edge right now. I don't have any Idea what to do
darthlinux said:
Ok scrap that turns out the phone had no charge, so I have charged it up for alittle while and its booted up fine and is working again, thank you so much my S6 is back to normal
Click to expand...
Click to collapse
No problem leave a thanks on my post mate
---------- Post added at 06:34 AM ---------- Previous post was at 06:34 AM ----------
vadess020514 said:
Did you already managed to fix your S6 edge Sir? Because it's happening to my S6 edge right now. I don't have any Idea what to do
Click to expand...
Click to collapse
Read up a few posts.
Whats the issue?
callumbr1 said:
No problem leave a thanks on my post mate
---------- Post added at 06:34 AM ---------- Previous post was at 06:34 AM ----------
Read up a few posts.
Whats the issue?
Click to expand...
Click to collapse
I think I bricked my phone. I tried various steps on how to fixed it but didn't work out! What's bodering me about is I coudn't boot it in recovery mode no matter how hard I tried. I also did flash a twrp but didn't work also. Plsss help me
vadess020514 said:
I think I bricked my phone. I tried various steps on how to fixed it but didn't work out! What's bodering me about is I coudn't boot it in recovery mode no matter how hard I tried. I also did flash a twrp but didn't work also. Plsss help me
Click to expand...
Click to collapse
Can you get into download mode?
callumbr1 said:
Can you get into download mode?
Click to expand...
Click to collapse
Yes sir. I used udin to flash a twrp. But still I can't boot to recovery mode.
vadess020514 said:
Yes sir. I used udin to flash a twrp. But still I can't boot to recovery mode.
Click to expand...
Click to collapse
What firmware was you on before?
What android version?
What region?
What was you doing before it all went wrong?
callumbr1 said:
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
What firmware are you flashing? G925fxxxxxx?
Try this
http://www.sammobile.com/firmwares/download/90724/G925FXXU4DPGW_G925FBTU4DPH1_BTU/
With this PIT
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Click to expand...
Click to collapse
Thank you so much! This worked perfectly! After hours of me searching and worrying I'd have to sell my phone I followed this and it's working! Thank you so much!
BeastmodeHDD said:
Thank you so much! This worked perfectly! After hours of me searching and worrying I'd have to sell my phone I followed this and it's working! Thank you so much!
Click to expand...
Click to collapse
Glad it helped mate
Help
callumbr1 said:
It depends which firmware you are flashing? Do not flash a random pit!!
Tell me the firmware and i can tell you the pit
Click to expand...
Click to collapse
Please help me which pit should i use I have s6 edge and i was flashing stock rom and it failed at hidden.img. I am using this firmware.
Country/Carrier Version PDA CSC
Pakistan (PAK) 7.0 G925FXXS5ERB6 G925FOJV5EQL1
Hello,
Recently I bought a second hand Samsung Galaxy SIII 9300 with Android 4.3. Because of privacy reasons I’d like to install cm 13.0 on the phone. I already had CM on my former phone, the Nexus 4. This was very easy to install, but I have some difficties with the Samsung Galaxy S3. These are the things I already tried:
I tried to install TWRP 2.8.4 and CWM via Odin 3.1203 in Windows 8. You can see here the log:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I enabled USB debugging
I unchecked Auto-reboot in Odin.
After I installed TWRP I removed the battery.
Can you help me with my problem?
According to Odin, TWRP succeeded. Can you boot into TWRP? You flashed the correct version of TWRP?
Hello
I cannot boot into TWRP. I am sorry to put it in my question, but that is my question. I tried to flash TWRP 3.0.2.2
Open Odin, only check f reset time, flash, when you see the "reset" in the Odin status window, remove USB cable from phone, remove battery, replace battery, use buttons to get into TWRP.
Root then flash. Flash Chainfire autoroot then flash your recovery, then flash your rom.
Beamed in by telepathy.
I worked!!!! I has to root the phone and than flash TWRL. Thankt you very much!!!
Jan10000 said:
I worked!!!! I has to root the phone and than flash TWRL. Thankt you very much!!!
Click to expand...
Click to collapse
You're welcome. Further advice is to make a backup of your phone once it is set up as you like it. That way, if anything goes tits up you have half of the job already done.
With twrp it's only a matter of time before it (twrp) goes mental and you'll have to resetyour device amd start over. I found the last official clockworkmod recovery the most reliable and have had 2 solid years from it. Also, get a copy of your stock rom from somewhere. You'll need that one day too!.
Beamed in by telepathy.
audit13 said:
Open Odin, only check f reset time, flash, when you see the "reset" in the Odin status window, remove USB cable from phone, remove battery, replace battery, use buttons to get into TWRP.
Click to expand...
Click to collapse
Hi, thanks. This worked for my GT-i9305.
I had previously done the flash for GT-i9300 years ago and was stuck on the same issue as the op.
TWRP 3.3.1-0
twrp-3.3.1-0-i9300.img
twrp-3.3.1-0-i9300.tar
source: https://github.com/ripee/android_device_samsung_i9300
TWRP 3.2.3 for Galaxy Grand 2 SM-G7102 (updated)
How to Install :-
*Download img file & copy to sd card
*go to recovery
*Select install
*Select img file
*Flash
*Reboot
All credit goes to twrp builder team
Hit the thanks button if u like this work
Updated recovery
V - 3.2.3
https://www.androidfilehost.com/?fid=1395089523397913506
V - 3.2.2
https://www.androidfilehost.com/?fid=1395089523397913502
V-3.2.1
img file
https://www.androidfilehost.com/?fid=1395089523397913543
Flashable zip file
https://www.androidfilehost.com/?fid=1395089523397913492
Here is odin flashable .tar file
https://www.androidfilehost.com/?fid=1395089523397913487
Alternate link -
https://drive.google.com/file/d/1ByVthZxLOQz37CTAubEglL855RmsVHLz/view?usp=sharing
No bugs??? I mean if any problem exist in TWRP 3.2.1.0?
Dharmik Jain said:
No bugs??? I mean if any problem exist in TWRP 3.2.1.0?
Click to expand...
Click to collapse
Nope its fully stable without any bugs
Sachinbansal said:
Nope its fully stable without any bugs
Click to expand...
Click to collapse
Thanks man. You guys gave grand 2 a new life again. Thanks for the latest twrp recovery for grand 2.
Nice
Is there an ODIN flashable version?
.tar
SavageDamage said:
Is there an ODIN flashable version?
.tar
Click to expand...
Click to collapse
Flash this one via odin then update the twrp
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Sachinbansal said:
Flash this one via odin then update the twrp
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Click to expand...
Click to collapse
i cant install with Odin . Error
This is Odin Log :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> twrp 3.2.1.0.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
alirezahoooy said:
i cant install with Odin . Error
This is Odin Log :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> twrp 3.2.1.0.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Flash this one first and then update it in twrp by zip or img file
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Maybe you can make same TWRP for G7105-ms01lte, would be very nice.
fantomel said:
Maybe you can make same TWRP for G7105-ms01lte, would be very nice.
Click to expand...
Click to collapse
Sorry man i cant but i can tell u someone who can help u so pm me
Man!! Links are not working.. Plz update ur links...
I really need twrp for my g7102.. I'm trying to download twrp for my phone from 1 year.
Plz send a valid link.
Thank you.
Nadeemex said:
Man!! Links are not working.. Plz update ur links...
I really need twrp for my g7102.. I'm trying to download twrp for my phone from 1 year.
Plz send a valid link.
Thank you.
Click to expand...
Click to collapse
Bro links are working
No prob in the link
Big problem
Himan111999 said:
Bro links are working
No prob in the link
Click to expand...
Click to collapse
I got stuck in a big problem!!
Firstly after downloading the file.
I turned off the phone and pressed volume up +power+home key
I got a warning(u might know what is it) ⚠ screen
Then i clicked volume up so that i can flash the recovery img file but the screen showed
Downloading!!!!
I waited for 5 mins but nothg happened i just restrrted the phone and flash img file with OFFICIAL TWRP APP
And rebooted to recovery mode.. At top left corner of the screen i got showing BOOTING TO RRCOVERY
But i didn't get in twrp the phone just got restarted!!!
Now i cant even go to stock recovery. Phone gets restarted every time!!!
SUGGEST ME A WAY TO FLASH IMG THROUGH MY PHONE ITSELF WITHOUT PC
THANKS!!
:crying:
Try to flash twrp using flashify app
Deleted
Contact
Sachinbansal said:
Try to flash twrp using flashify app
Click to expand...
Click to collapse
Thanks! For concern
Nadeemex said:
Bhai!
+7731065308 mera whatsapp no. Hai. ek baar msg kardo mai aap ko sabkuch clearly samjhadunga
Ya aap apna no. Do!
Thanks! For concern
Click to expand...
Click to collapse
Msg me here on telegram
https://t.me/acharya21
acharya21 said:
Nope its fully stable without any bugs
Click to expand...
Click to collapse
Can you add a password option? Everyone can run twrp holding 3 buttons and get full access to filesystem Everyone can even brick device wiping system. It's a huge security hole, isn't it?
lek2018 said:
Can you add a password option? Everyone can run twrp holding 3 buttons and get full access to filesystem Everyone can even brick device wiping system. It's a huge security hole, isn't it?
Click to expand...
Click to collapse
I dont think that can be done in twrp for that we need red wolf recovery