Hello guys, and today i'll be sharing a great post with you guys that how can you use Google Pixel 2's Portrait effect on Your Snapdragon 400 Series Powered android devices, (as of now i have tested on Redmi 5A) and it working super fine, like i am able to capture Front Cam Bokeh shots, and rear cam portrait images, so in this post i'll show you how to enable or use Google Pixel 2's Modded Camera on Your Redmi 5A
so first of all i would like to thanks Senior XDA developers @Arnova8G2 and @miniuser123 for improving these kind of port.
Disclaimer:
guys the process requires Root Access to enable Camera2API, so it will void your warranty, and also if you dont follow the steps correctly you can brick your device, do it at your own risk, AndroWide is not responsible for any issues caused to your phone after rooting or during the process.
Known Bugs :
After enabling Camera2API on Redmi 5A MIUI camera does't work (you can disable the Camera2API at any time to use stock camera),
Video Recording is not working on GCMode Camera as of now on Redmi 5A.
Now let me tell you that what you will have to do to achieve this camera port on you device.
Steps :
Unlock Your Bootloader
Download Magisk.zip file and LazyFlasher.zip files and put it on your Redmi 5A's Internal Storage and also download the GCMode camera apk and put put it on your device
Download and install ADB & Fastboot Drivers on Your Laptop/PC
Download latest adb folder (extract it to desktop)
Download the official TWRP for Redmi 5A and ( copy twrp-3.2.1-0-riva.img to the adb folder)
Now boot you device into fastboot mode (simply press and hold volume down + power key for upto 5 seconds)
now connect your device with the pc and open the adb folder,
now press & hold shift key and press right click on the screen to open command window AKA powershell window (just open the command window)
now type command:
fastboot devices
now it will show you some random string (that means you device has been detected)
now run the following command :
fastboot flash recovery twrp-3.2.1-0-riva.img
now type the following command :
fastboot boot twrp-3.2.1-0-riva.img
now your device will boot into recovery mode just swipe right,
now click on install and select the LazyFlasher.zip file, after flashing done, just reboot your device,
now again boot into twrp recovery by pressing and holding volume Up+power key at the same time for upto 6 seconds
now again click on install and this time select magisk.zip file and wait until it shows done, now just reboot your device
and download the magisk manager app and install it, now download build prop editor from play store and edit the build.prop file (make sure to make a backup of your stock build.prop file)
now add the following line in build.prop file
persist.camera.HAL3.enabled=1 save the file and reboot your device.
now install the GCMod Camera which you have downloaded in the step one and make the following settings.
go to GCMod Settings, Click on Config camera HDR+ and select Nexux 5X, and click on model and select Nexus 5X, now scroll down and go to advanced and Enable HDR+ Control,
Now Just force close the GCMod Camera and now you can capture great portrait images with the front cam as well as rear cam.
:good::good::good:
how it is working on Redmi A5
is there big difrence to stock camera ?
Amazing work bro.. works great.
Hi.please help
So I have the redmi note 5 pro rooted and running a custom rom on Android 8.1 Oreo. I have enabled the camera2api enabler module in magisk manager.but still the manual camera compatibility app shows everything red and the camera apk I installed keeps crashing.
Please reply asap
How to fix video record
thank you, but when i want to send the image to facebook messenger, line, facebook app, the image doesn't appear, but when i open galery the image is there
Hi sir great work , but after enabling CAMERA2API my stock camera of Redmi 5a not working ,
I have followed the procedure step by step.
Please help sir
---------- Post added at 07:45 AM ---------- Previous post was at 07:42 AM ----------
Great work sir , Sir But I'm facing a problem that After enabling CAMERA2API my stock camera of Redmi 5a not working.
I have followed the procedure step by step.
Please help
have gcam for samsung j8 SD 450 ???
tiestodemoni said:
have gcam for samsung j8 SD 450 ???
Click to expand...
Click to collapse
It doesn't have camera 2api enabled
You have to enable it
m.ayaz1148 said:
It doesn't have camera 2api enabled
You have to enable it
Click to expand...
Click to collapse
if i'm enable, i'm can use the apk?
tiestodemoni said:
if i'm enable, i'm can use the apk?
Click to expand...
Click to collapse
Yes i m using gcam with night sight mode
faizalpathan said:
Yes i m using gcam with night sight mode
Click to expand...
Click to collapse
What Gcam are you using with nightsight mode ?
Related
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
All About Redmi 3 Family
If you are satisfied with my work please make a donation
Bitcoin : 169cZB6dmrbFZBwJpS4gjawUQdhhxZpWNz
U can ROOT them and U can flash XPOSED !
Roms For Redmi 3/Pro and Redmi 3S/3X(MIUI 7&8)[Official/Unofficial Global ROM]
For both Locked and Unlocked bootloaders
Please report the bugs For Redmi 3/Pro HERE
Please report the bugs For Redmi 3S HERE
Please report the bugs For Redmi 3X HERE
I am not responsible for any damage you may cause So
Do it at your own RISK
Code:
[SIZE="3"][CENTER][B][COLOR="red"]***If you dont wanna unlock your bootloader but need Root and TWRP Please flash SpaceX ROM***
**Remember by flashing SpaceX U cant Unlock your bootloader(it will stop at 50%) till you reflash Stock China Dev ROM**
*I recommend U Flash the least China Dev ROM and Unlock your Bootloader first
and flash xiaomi.eu ROMs (anyway as you wish!)
[If You are running SpaceX ROM and wanna unlock your bootloader check section "How to Unlock bootloader" ]
[/COLOR][/B][/CENTER][/SIZE]
Xiaomi Redmi 3 Pro - Bend test, Scratch test, Burn test - Durability video : Be Proud of your phone
Its better than Mi5 !!!!
Video Link
Download ROMs :
Redmi 3/Pro
Redmi 3/Pro Locked Bootloader: [SpaceX][MIUI7][Stable][6.5.12] Link
Redmi 3/Pro Locked Bootloader: [SpaceX][MIUI8][Weekly][6.7.7] Link
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI7][6.5.25] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI7.5][Stable] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI8][Stable] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI8][Weekly] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [Thunder ROM][MIUI8][Weekly] Link
Redmi 3S/3X
Redmi 3S/3X Locked Bootloader : [SpaceX][MIUI8][Weekly]
Redmi 3S/3X Locked Bootloader : [Stock][MIUI7.5][Stable][Global] Link
Redmi 3S/3X Unlocked Bootloader: [xiaomi.eu][MIUI8][Weekly] Link [Please Download HM3SHM3X]
Redmi 3S/3X Unlocked Bootloader: [xiaomi.eu][MIUI 7.5][Stable] Link [Please Download HM3SHM3X]
How to Update SpaceX ROM with Locked Bootloader [Redmi3/Pro]?
As far as U know its not possible to update the Space X via OTA so I bring u a way to update your ROM to least version of MIUI8 even with LockedBootloader(Do it at your OWN RISK)
According to reports :
Anybody Who flashed SpaceX 6.7.7 with Locked Bootloader can update to least MIUI 8 !
For safety matters (for example: Quadroot Vulnerability) and more features its logical to do it !
Description and Download Link : LINK1 &LINK2
Please tell me about it
Push Thanks If You liked it :good::good:
How to Unlock the Bootloader?
1. (Important) Backup your data and store them out of the phone
2. (Very Important) Download and flash the least China Dev ROM Here >>> Flashing Guide
*( before downloading , think about the way you wanna flash it ! )
3. And read this (*ignore note 3 ! its the same method for Redmi3)
*** If You are running SpaceX and Try to Unlock the bootloader it will stop at 50% but I solve it > here we go:
1. Download the least FASTBOOT China Dev ROM here
File name : Redmi 3 Latest China Developer Version Fastboot File Download
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) link
3. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
4. Reboot the PC
5. at Phone :Go to Developer options and Enable "Enable OEM unlock" , "USB debugging" and "Fastboot mode"
6.at Windows : Extract the FASTBOOT China Dev ROM in a newfolder and extract the contained file with 7-zip app
in the extraction area u got to see some files and a folder named : "image(s)"
7. Run Miphone and select extraction area folder (not images folder)
8. Turnoff the phone and hold vol- and press power button till u see the FASTBOOT logo
9. Plug USB cable to the phone and let windows detect the phone after that refresh the Miphone and it has to detect your device make sure that are address the folder correctly
and select "Flash all" in MiFlash then press flash and sit tight [ never ever disconnect the phone during flashing or you may lose it for ever better to use a laptop for power disconnection matters ]
when flashing is done the phone reboots itself and takes around 10 minute to boot up
after that login to your Mi account and do this (*ignore note 3 ! its the same method for Redmi3)
How to Flash Recovery [Redmi 3/Pro] ( TWRP )?
You need to unlock the bootloader first (see section "How to Unlock the Bootloader")
[f you are running China Dev ROM skip this part](Very Important) Download and flash the least China Dev ROM Here >>> Flashing Guide
*( before downloading , think about the way you wanna flash it ! )
.
.
***Check the Bootloader status ***
Code:
fastboot oem device-info
If its relocked dont worry Just Unlock it with the Miflash Unlock tool !
.
.
1. Download the least Version of TWRP here
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) link
3. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
4. Reboot the PC
5. In order not to end up with bootloop you got to active China Dev ROM root @ Security app > Permissions > Root (you need internet connection for that) Phone phone reboots and takes 10 minute to bootup
6. Go to Developer options and Enable "Enable OEM unlock" , "USB debugging" and "Fastboot mode"
7. Connect your phone to the PC with USB cable and Run CMD (as administrator) (serach CMD in windows 7 Start)
8.At CMD type
Code:
adb root
and wait a while
then type
Code:
adb disable-verity
almost done !
9. Turn off the phone and turn it on while you are holding both POWER and VOL(-)[down] together it has go to FASTBOOT
10. Rename the downloaded recovery to "twrp.img" and Create a new folder in desktop and move the twrp.img in to it
11. At the new folder Hold SHIFT button of keyboard and press Right key of mouse (a menu pops out) select "Open command window here"
12. at the command window type
Code:
fastboot devices
13. if you see any registered device(if not do step 2&3 again or try on another windows)go for final step type
Code:
fastboot flash recovery twrp.img
wait a while then type
Code:
fastboot boot twrp.img
after that u will find yourself at TWRP!
U can do what ever u want now!
14. It's DONE !!! U got 2 options to go to the recovery
First > (Setting>About phone> System updates > upper right 3-dots menu > "Reboot to Recovery mode")
Second > (Hold Power and vol+ together while the phone is off)
:good::good:Press thanks if it was awesome! :good::good:
How to Flash Recovery [Redmi 3S/3X] ( TWRP )?
1. Unlock your bootloader ( see section"How to Unlock the Bootloader" )
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) link
3. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
4. Reboot the PC
5. Install TWRP Recovery with TWRP Installer Tool: Here
6. Phone will automatically boot into recovery mode.
Swipe to allow modifications.
Browse to Advanced setting and Disable dm-verity. (If You dont do that the phone ends up with bootloop)
How to Unbrick Redmi 3 ?
for all of possible conditions you need these stuffs so bring them up before you start unbricking the phone
1. Download Adb/Fastboot and install it on Windows 7 (64bit recommended )
2. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
3. Reboot the PC
We have a different scenarios:
a) The phone boots up and stock in MI logo (softbrick)
a2) The phone boots up and stock in MI logo and android animation (softbrick)
a3) The phone boots up and reboot itself (softbrick)
a4) The phone does not boot up but it respond while plugging charger (softbrick or hardbrick)
b) The phone does not boot up and its not respond while plugging charger (hardbrick)
For Scenario( a & a2 & a3 & a4 )
*** If you have unlocked bootloader try to flash TWRP and reflash a stable rom (like xiaomi.eu)
*** For lockedbootloader :
Hold power button till phone restarts as quick as possible hold vo(+) so that phone can go to bootloader Try to reflash the ROM in download mode
Watch the video
What you need :
1. ROM Download
2. MiFlash
3. Do what exactly the Video says
For Scenario B (Hard Brick! ):
first of all make sure your battery has enough charge
1. Download the least FASTBOOT China Dev ROM here
File name : Redmi 3 Latest China Developer Version Fastboot File Download
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) Link
3. Download MiFlash ( MiPhone20151028.exe) Download and install it on the Windows 7 (Allow all the Drivers instillation)
4. Download and install THIS1 & THIS2 then Reboot the PC
5.at Windows : Extract the FASTBOOT China Dev ROM in a newfolder and extract the contained file with 7-zip app
in the extraction area u got to see some files and a folder named : "image(s)"
Now be ready for the phone...
Keep press vol(+) and vol(-) together (make sure U do it !! press harder dont worry!!!! ) (dont leave them ! )and then press power button till U see a blank page,The phone is on ... U can see the background LED lights (THE PHONE IS IN THE FACTORY PROGRAMMABLE MODE)
now
7.Run MiPhone (or MIflash) Plug USB cable to the phone and let windows detect the phone after that refresh the Miphone and it has to detect your device (U see the phone is detected ... if not do part 3 and 4 another time or try on another win7 64bit) and select extraction area folder and select (images folder)
and select "Flash all" in MiFlash then press flash and sit tight [ never ever disconnect the phone during flashing or you may lose it for ever better to use a laptop for power disconnection matters ]
If u got an error (TELL ME ABOUT THE ERROR)dont worry
8.Run Miphone and select extraction area folder (not the images folder this time select the root folder! )
and select "Flash all" in MiFlash then press flash and sit tight [ never ever disconnect the phone during flashing or you may lose it for ever better to use a laptop for power disconnection matters ]
It takes around 300-400 s to flash
When its done press power key for seconds and it resets
U are ok now ! ( wait around 20 min to see the least MIUI8 )
Please Keep me Update!
How to use semi-QuickCharge ?
Caution :
Redmi 3/Pro stock kernel do not support QC but it can use maximum 1.6 A of 2.0 A .
but why is that ?
according to battery safety policy it cant be so warm during charging so PMU will decrease the current in order to make the battery cooler. it s kinda related to PMU parameters ( some kernels can modify that unfortunately Redmi 3/pro stock kernel do not support PMU modification )
so how could I reach 1.6A ? ( in normal operation you may reach to 0.8 A)
***flash the least version of MIUI 8 first***
1. Install ampere app
2.Turn on Airplane mode
3.Force stop all background app
4.Run Ampere and plug the charger
5.Use the stock adapter (5V @2A) and stock cable
6.Try to cool it down while its charging ! ( I used Ice pack for that) (dont cool it so much keep it around 20 Celsius degree or you may damage the battery )
7.Then you reach 1.6A current (in the optimum situation)
*** Simply ! Try to keep the phone cool while its charging ! ***According to sciences You cant charge the phone [0 to 100] less than 160 Minutes!
So dont blame the phone!
Try to create a new kernel !
Dont Forget to Thanks :good::good::good:
Root:
*First of all You need to Unlock your bootloader and flash TWRP
(See section "How to Unlock bootloader" and "How to Flash Recovery")
1. Download Stable or the least Super su "link"
2.Store the downloaded zip file into phone
3.Reboot to recovery (Setting>About phone> System updates > upper right 3-dots menu > "Reboot to Recovery mode")
@ Recovery :
1. Allow system modification
2. Install Supersu zip
3. Reboot
4. Now You have access to Super su features
Xposed For MIUI 8 (SDK22) Arm64[Both Locked and unlocked BL] :
***First Flash the least version of Supersu with TWRP *** "[Link]"
1.Download XposedInstaller_3.0-alpha4 and install it [Link]
2.Download Xposed For MIUI 8 (SDK22) Arm64 and move it to SD [Link]
2*.Download Xposed Uninstaller and move it to SD [Link]
3.Reboot to recovery (Setting>About phone> System updates > upper right 3-dots menu > "Reboot to Recovery mode")
then Flash Xposed For MIUI 8 with TWRP
4.Reboot (may takes time to boot up)
5.If anything goes wrong Flash Xposed Uninstaller and reboot
Screenshots:
COMING SOON ...
Tweaks (More Battery and Performance) :
I've Started New Project (BT4A)
Check it out LINK [UPDATED] [/B]
Bugs:
- No LTE for some users NOT FIXED YET!
- Brightness changes to its default value by cleaning the recent apps
Temp FIX: Turn on reader mode and choose "Selected apps" . but don't select any app in it ... DONE !
How to Flash the ROM ?
(you may lose your data storing on internal storage after flashing so back up your data first and keep them out of phone !)
Locked Bootloader:
Watch the video
What you need :
1. ROM ( You got from Download section)
2. MiFlash (Download MiPhone20151028.exe) Link
3. Do what exactly the Video says
Unlock bootloader:
1.Move the Downloaded ROM to SD
2.Do a factory reset
3.Do a clean Flash of the Downloaded file with TWRP Recovery
Remember First Boot takes time please be patient
Don't Forget to
push Thanks bottom
:good: :good: :good: :good:
XDA:DevDB Information
ROMs For Redmi3/Pro/S/X, ROM for the Xiaomi Redmi 3
Contributors
adblocker
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Stable
Current Stable Version: 8.0.2
Stable Release Date: 2016-09-01
Current Beta Version: 6.10.27
Beta Release Date: 2016-10-28
Created 2016-06-28
Last Updated 2016-10-28
thanks dude for ur work. i wanna ask u something, what is the difffrent about your rom with xiaomi.eu build. look like its have same feature? correct me if im wrong. thanks in advice
sorry for my bad english
So far this is the cleanest rom I've used, liking it.:good:
tpetran said:
So far this is the cleanest rom I've used, liking it.:good:
Click to expand...
Click to collapse
what about fingerprint?
Mahut said:
what about fingerprint?
Click to expand...
Click to collapse
don't know, I have plain Redmi 3
Mahut said:
what about fingerprint?
Click to expand...
Click to collapse
Working
check the bug section
iModStyle said:
thanks dude for ur work. i wanna ask u something, what is the difffrent about your rom with xiaomi.eu build. look like its have same feature? correct me if im wrong. thanks in advice
sorry for my bad english
Click to expand...
Click to collapse
Please check the feature section
thanks for providing this rom since i got bootstuck after flashing twrp. it saved my phone
btw how to activate lte on this rom? i already changed through *#*#4636#*#* lte only but no changes, still stuck at wcdma preferred.
any help would be appreciated
thanks
I'll use this rom if lte issues solved.. Thx
28/06/2016
23:05: Flashing ...
23:25: Flashed, booted, configured - now testing
00:30: Everything looks so far so good. I am currently not using any SIM Card. Wifi is stable, translations are good, ROM is fast and responsible. FM Radio is working great.
00:35: I compared the Stock ROM NON-HLOS.bin with the NON-HLOS.bin of this build. They are identical. I hope to get a Indian NON-HLOS.bin to compare with my stock rom version to figure out how to enable LTE Band 20, which is very important for germany. Any hint is very welcome!
08:00: Flashed SuperSU latest build with TWRP, working great here.
Conclusion so far:
- ROM is very stable (out of the box), no crashes so far
- ROM is very fast. Booting is a lot faster than any other ROM before and feels very smooth. Congrats!
GoodSoul said:
28/06/2016
23:05: Flashing ...
23:25: Flashed, booted, configured - now testing
- Looking great so far.
Question(s):
- When I boot to recovery and allow "modifications", is my system then broken (bcs. I am on a unlocked bootloader)?
Click to expand...
Click to collapse
i think not cz before installing this rom my stock dev rom is broken then i flash this rom and it works great for me unless the lte
papazz23 said:
i think not cz before installing this rom my stock dev rom is broken then i flash this rom and it works great for me unless the lte
Click to expand...
Click to collapse
Did you have LTE before flashing this ROM? Bcs. NON-HLOS.bin is the same as on the Stock ROM.
adblocker said:
Please check the feature section
Click to expand...
Click to collapse
ok may i was wrong, but when i check link for unlock it show build from xiaomi.eu sir. sorry if im wrong (again) i wanna taste ur rom and report the result here hehe. thanks for answering.
iModStyle said:
ok may i was wrong, but when i check link for unlock it show build from xiaomi.eu sir. sorry if im wrong (again) i wanna taste ur rom and report the result here hehe. thanks for answering.
Click to expand...
Click to collapse
The unlocked bootloader is the same as .eu
New Bug (maybe) :
Have U guys notice any thing wrong about Auto Brightness ?
Sometimes it freezes on 20 % till u lock and reopen the phone !
Please tell me about Any weird thing in the Rom
GoodSoul said:
28/06/2016
23:05: Flashing ...
23:25: Flashed, booted, configured - now testing
Question(s):
- When I boot to recovery and allow "modifications", is my system then broken (bcs. I am on a unlocked bootloader)?
Click to expand...
Click to collapse
When I boot to recovery and allow "modifications", is my system then broken (bcs. I am on a unlocked bootloader)?
No , Its functional
Flash Super su with that (link in description)
adblocker said:
No , Its functional
Flash Super su with that (link in description)
Click to expand...
Click to collapse
It is working, thnx. But for Xposed I still needed a unlocked BL, correct?
adblocker said:
New Bug (maybe) :
Have U guys notice any thing wrong about Auto Brightness ?
Sometimes it freezes on 20 % till u lock and reopen the phone !
Please tell me about Any weird thing in the Rom
Click to expand...
Click to collapse
i thin it's from the miui 8 itself cz i used to face it when in stock dev miui 8. if you can fix it would be awesome
GoodSoul said:
Did you have LTE before flashing this ROM? Bcs. NON-HLOS.bin is the same as on the Stock ROM.
Click to expand...
Click to collapse
lte on the previous stock dev rom works well. it's weird that i can't lock it to lte, but the others are good 'wcdma only' and 'gsm only'.
adblocker said:
The unlocked bootloader is the same as .eu
Click to expand...
Click to collapse
oh i see, thanks sir for ur answer
iModStyle said:
thanks dude for ur work. i wanna ask u something, what is the difffrent about your rom with xiaomi.eu build. look like its have same feature? correct me if im wrong. thanks in advice sorry for my bad english
Click to expand...
Click to collapse
The made by ManhIT does not require you to unlock your bootloader, has no Chinese apps, etc. Check this post and the whole thread.
tpetran said:
So far this is the cleanest rom I've used, liking it.:good:
Click to expand...
Click to collapse
True that, if you probably exclude CM, because this one still holds MI account and other few similar things (which I never user for instance).
iModStyle said:
ok may i was wrong, but when i check link for unlock it show build from xiaomi.eu sir. sorry if im wrong (again) i wanna taste ur rom and report the result here hehe. thanks for answering.
Click to expand...
Click to collapse
You should go for the ManhIT build for sure. It is build after the xiaomi.eu but it is tweked a bit.
adblocker said:
The unlocked bootloader is the same as .eu
Click to expand...
Click to collapse
Not sure what you mean but I can confirm that my bootloader is locked even with the ManhIT version, which is not an official build like the one found at xiaomi.eu
BTW the OP for the SpaceX by ManhIT is http://choimobile.vn/threads/locked...-6-23-khong-can-unlock-booloader-26-06.66360/
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
Is there any way around to root redmi note 3 on android 7.1 by santosh m without breaking sensors
Have u tried phh's superuser?
Rishabh1x said:
Have u tried phh's superuser?
Click to expand...
Click to collapse
Please pm me link
devabhi said:
Is there any way around to root redmi note 3 on android 7.1 by santosh m without breaking sensors
Click to expand...
Click to collapse
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
[https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
[/COLOR]Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://forum.xda-developers.com/red...mod-14-0-xiaomi-redmi-note-3-t3459382/page330
Is it possible to root using phone itself?
pls can this be used on redmi note 3 pro with global stable rom on android 5.1.1 ...
ThX
ive read conflicting reports.. some saying that its physically impossible on snapdragon 625 devices, and others stating that its possible on unsupported devices with specific roms. Anyone care to shed some light for me?
aptX is a proprietary codec; inclusion to a device requires the vendor to pay licensing fees to Qualcomm. So, if vendor doesn't do that, we shouldn't do it either.
Sent from my Redmi Note 4 using XDA Labs
Yes,it is possible. I had aptX working on nougat but it just refuses to work on oreo for some reason.
If you re on nougat just look up for aptx.zip somewhere on xda ..oneplus 3 forums if I remember corectly.
ok understood!
ive just built a nice new high end soundsystem, and included an apt-x bluetooth receiver.. would be a crying shame if my phone didnt support it. I ordered this phone 2 days ago, assuming casually that all modern bluetooth devices would support aptx.
Nope,they actually don't. There are many new/old phones(even flagships) that don't support APTX
I've got aptx working on oreo as well. You just have to flash a custom rom and then flash aptx from here : https://forum.xda-developers.com/on...-aptx-aptxhd-oreo-beta-25-16-op-3-3t-t3690363
Thanks everyone. seems positive.
one thing i dont understand. if its just a codec, which needs licensing, why do qualcomm specify it as only being supported by certain cpus?
see here under "audio technology" :
https://www.qualcomm.com/products/snapdragon/processors/comparison
snapdragon 625 notably doesnt list aptx
Robert- said:
Yes,it is possible. I had aptX working on nougat but it just refuses to work on oreo for some reason.
If you re on nougat just look up for aptx.zip somewhere on xda ..oneplus 3 forums if I remember corectly.
Click to expand...
Click to collapse
On miui or lineage?
jimger said:
On miui or lineage?
Click to expand...
Click to collapse
It works on both. There's a Magisk module for that
I have tried one on miui nougat and doesn't seem to work
Noter2017 said:
It works on both. There's a Magisk module for that
Click to expand...
Click to collapse
Sent from my Redmi Note 4 using Tapatalk
aptx working solution on Redmi Note 4 (india) snapdragon
robinlawrie said:
ive read conflicting reports.. some saying that its physically impossible on snapdragon 625 devices, and others stating that its possible on unsupported devices with specific roms. Anyone care to shed some light for me?
Click to expand...
Click to collapse
[Aptx was already working on my Redmi 2, 8GB ROM, 1GB RAM (Model HM 2014811) after installing CM 14.1 & Aptx through TWRP, (but it was not working on MIUI 6, CM11)]
In case of Redmi Note 4 the following method is successful.
Existing conditions:
Phone: Redmi Note 4 (India, i.e. Snapdragon), MIUI 10 from mido_global_images_8.7.26_20180726.0000.00_7.0_global_9529295baa.tgz
Fresh installed without setting any screen lock, password, finger print , google account Mi account (this is suspected to lead to data corruption, if it happens we have to flash above MIUI10 full fastboot ROM again, hence all files better to be saved on external SD Card)
Windows : Windows 10 v1707, 64 bit , Pda net installed.
Apps / programs required : may be googled and downloaded
Major Activities Involved
A. Unlocking of boot loader
B. (i) Installation of TWRP v3.2.2.0-mido.img (recovery suitable to Redmi Note 4 SnapDragon)
(ii) Installation of [Mido][Material][Twrp-Treble][3.2.1-10].zip (recovery suitable to Redmi Note 4 SnapDragon by Jairus980)
C. (i) Installation of lineage-15.1-20180807-nightly-mido-signed.zip (ROM suitable to Redmi Note 4 SnapDragon)
(ii) Installation of open_gapps-arm64-8.1-nano-20180812.zip (gapps suitable to arm64)
(iii) Installation of Magisk-v16.7_Bundle.zip (both magisk & magisk manager for getting rooted)
(iv) Installation of REVOLT.EAS-R13-20180722-2040.zip (kernel after 20.07.2018)
(v) Installation of aptX-oreo.zip
(vi) Installation of Apt-X_HD_Port_by_androidexpert35.zip
(vii) Installation of aptX-HD_OreoEnabler.zip
(viii) Installation of lazyflasher-no-verity-opt-encrypt.zip (for no-verity-opt-encrypt)
A. Unlocked boot loader
Official method (The process is simplified and the permission is granted automatically. You don't have to fill in any application form or wait for the SMS anymore)-successful on my Redmi Note 4 SD.
1. Settings---> About phone---> MIUI Version (Keep tapping it to enable developer option).
2. Settings---> Additional settings---> Developer option and bind your approved Mi account under Mi Unlock Status.
3. Go to https://en.miui.com/unlock/ and click on unlock now , change english , log in to mi your account (on pc_) , Download mi unlock to pc, unzip it , open mi unlock (on PC) log into the Mi account which has acquired unlocking permission on your device.
4. When you logged into the Mi Unlock Tool, tap on the top right gear icon to check the update for both USB driver and Mi Unlock Tool. Make sure you're running the latest version.
5. Turn off your device, press the Power button and Volume - button at the same time to enter bootloader mode
6. Log into the unlocking tool on PC with the same Mi account. Connect the device to the PC using USB cable
7. Press 'Unlock'. Press Unlock anyway, The unlocking process will complete in about 10 seconds (sr no 4, 5, 6 & 7 repeated twice, as unlocking hanged at 99% )
B. (i) Installation of TWRP (img file)
1. Install minimal_adb_fastboot_v1.4_setup.exe on PC and note down the installed directory.
2. Copy twrp v3.2.2.0-mido.img (recovery suitable to Redmi Note 4 SnapDragon) to above directory and rename it to recovery.img (all small letters without any spaces in between) or any other name for the sake of easiness.
3. Bring the Phone to fastboot (i.e. bootloader) mode (method: while the phone is in switched off condition press volume down and power button simultaneously still the phone is entered into fastboot mode [Bunny picture appears])
4. Launch Minimal ADB and Fastboot on PC execute command
fastboot flash recovery recovery.img
5. Press and hold volume up and power button simultaneously but release only power button after 8 to 15 seconds of restart and appearance mi logo and release volume button after TWRP appears.
(ii) Installation of TWRP by Jairus980
1. Install [Mido][Material][Twrp-Treble][3.2.1-10].zip (recovery suitable to Redmi Note 4 SnapDragon by Jairus980) and wipe catche
2. Press and hold volume up and power button simultaneously but release only power button after 8 to 15 seconds of restart and appearance mi logo and release volume button after TWRP Recovery Project (i.e. TWRP by Jairus980) appears.
C. (i) wipe>advanced>select all except internal storage>wipe
(ii) Install “ lineage-15.1-20180807-nightly-mido-signed.zip” (ROM suitable to Redmi Note 4 SnapDragon) and wipe catche
(iii) Install “open_gapps-arm64-8.1-nano-20180812.zip” (gapps suitable to arm64) and wipe catche
(iii) Install “Magisk-v16.7_Bundle.zip” (both magisk & magisk manager for getting rooted) and wipe catche
(iv) Install (only after installation magisk) “REVOLT.EAS-R13-20180722-2040.zip” (kernel after 20.07.2018) and wipe catche
(v) Install (only after installation magisk) “aptX-oreo.zip” and wipe catche
(vi) Install (only after installation magisk) “AptX_HD_Port_by_ androidexpert 35.zip” and wipe catche
(vii) Install (only after installation magisk) “aptX-HD_OreoEnabler.zip” and wipe catche
(viii) Install at last but very important “lazyflasher-no-verity-opt-encrypt.zip” (for no-verity-opt-encrypt to be installed at last to avoid any over writing) and wipe catche
Reboot system
It will restart once, if taking more time switch off and switch on once
After the phone is on, click 7 times on build number to enable Developer options (settings>about phone> build number)
Redmi Note 4 SD Oreo 8.1 connected to Avantree Oasis (restart phone if any Bluetooth connection problem happens) in AptX mode can be seen picture
Not yet checked, but expect it will function even if unrooted.
Final success APTX Working with MIUI itself
knreddy said:
[Aptx was already working on my Redmi 2, 8GB ROM, 1GB RAM (Model HM 2014811) after installing CM 14.1 & Aptx through TWRP, (but it was not working on MIUI 6, CM11)]
In case of Redmi Note 4 the following method is successful.
Existing conditions:
Phone: Redmi Note 4 (India, i.e. Snapdragon), MIUI 10 from mido_global_images_8.7.26_20180726.0000.00_7.0_global_9529295baa.tgz
Fresh installed without setting any screen lock, password, finger print , google account Mi account (this is suspected to lead to data corruption, if it happens we have to flash above MIUI10 full fastboot ROM again, hence all files better to be saved on external SD Card)
Windows : Windows 10 v1707, 64 bit , Pda net installed.
Apps / programs required : may be googled and downloaded
Major Activities Involved
A. Unlocking of boot loader
B. (i) Installation of TWRP v3.2.2.0-mido.img (recovery suitable to Redmi Note 4 SnapDragon)
(ii) Installation of [Mido][Material][Twrp-Treble][3.2.1-10].zip (recovery suitable to Redmi Note 4 SnapDragon by Jairus980)
C. (i) Installation of lineage-15.1-20180807-nightly-mido-signed.zip (ROM suitable to Redmi Note 4 SnapDragon)
(ii) Installation of open_gapps-arm64-8.1-nano-20180812.zip (gapps suitable to arm64)
(iii) Installation of Magisk-v16.7_Bundle.zip (both magisk & magisk manager for getting rooted)
(iv) Installation of REVOLT.EAS-R13-20180722-2040.zip (kernel after 20.07.2018)
(v) Installation of aptX-oreo.zip
(vi) Installation of Apt-X_HD_Port_by_androidexpert35.zip
(vii) Installation of aptX-HD_OreoEnabler.zip
(viii) Installation of lazyflasher-no-verity-opt-encrypt.zip (for no-verity-opt-encrypt)
A. Unlocked boot loader
Official method (The process is simplified and the permission is granted automatically. You don't have to fill in any application form or wait for the SMS anymore)-successful on my Redmi Note 4 SD.
1. Settings---> About phone---> MIUI Version (Keep tapping it to enable developer option).
2. Settings---> Additional settings---> Developer option and bind your approved Mi account under Mi Unlock Status.
3. Go to https://en.miui.com/unlock/ and click on unlock now , change english , log in to mi your account (on pc_) , Download mi unlock to pc, unzip it , open mi unlock (on PC) log into the Mi account which has acquired unlocking permission on your device.
4. When you logged into the Mi Unlock Tool, tap on the top right gear icon to check the update for both USB driver and Mi Unlock Tool. Make sure you're running the latest version.
5. Turn off your device, press the Power button and Volume - button at the same time to enter bootloader mode
6. Log into the unlocking tool on PC with the same Mi account. Connect the device to the PC using USB cable
7. Press 'Unlock'. Press Unlock anyway, The unlocking process will complete in about 10 seconds (sr no 4, 5, 6 & 7 repeated twice, as unlocking hanged at 99% )
B. (i) Installation of TWRP (img file)
1. Install minimal_adb_fastboot_v1.4_setup.exe on PC and note down the installed directory.
2. Copy twrp v3.2.2.0-mido.img (recovery suitable to Redmi Note 4 SnapDragon) to above directory and rename it to recovery.img (all small letters without any spaces in between) or any other name for the sake of easiness.
3. Bring the Phone to fastboot (i.e. bootloader) mode (method: while the phone is in switched off condition press volume down and power button simultaneously still the phone is entered into fastboot mode [Bunny picture appears])
4. Launch Minimal ADB and Fastboot on PC execute command
fastboot flash recovery recovery.img
5. Press and hold volume up and power button simultaneously but release only power button after 8 to 15 seconds of restart and appearance mi logo and release volume button after TWRP appears.
(ii) Installation of TWRP by Jairus980
1. Install [Mido][Material][Twrp-Treble][3.2.1-10].zip (recovery suitable to Redmi Note 4 SnapDragon by Jairus980) and wipe catche
2. Press and hold volume up and power button simultaneously but release only power button after 8 to 15 seconds of restart and appearance mi logo and release volume button after TWRP Recovery Project (i.e. TWRP by Jairus980) appears.
C. (i) wipe>advanced>select all except internal storage>wipe
(ii) Install “ lineage-15.1-20180807-nightly-mido-signed.zip” (ROM suitable to Redmi Note 4 SnapDragon) and wipe catche
(iii) Install “open_gapps-arm64-8.1-nano-20180812.zip” (gapps suitable to arm64) and wipe catche
(iii) Install “Magisk-v16.7_Bundle.zip” (both magisk & magisk manager for getting rooted) and wipe catche
(iv) Install (only after installation magisk) “REVOLT.EAS-R13-20180722-2040.zip” (kernel after 20.07.2018) and wipe catche
(v) Install (only after installation magisk) “aptX-oreo.zip” and wipe catche
(vi) Install (only after installation magisk) “AptX_HD_Port_by_ androidexpert 35.zip” and wipe catche
(vii) Install (only after installation magisk) “aptX-HD_OreoEnabler.zip” and wipe catche
(viii) Install at last but very important “lazyflasher-no-verity-opt-encrypt.zip” (for no-verity-opt-encrypt to be installed at last to avoid any over writing) and wipe catche
Reboot system
It will restart once, if taking more time switch off and switch on once
After the phone is on, click 7 times on build number to enable Developer options (settings>about phone> build number)
Redmi Note 4 SD Oreo 8.1 connected to Avantree Oasis (restart phone if any Bluetooth connection problem happens) in AptX mode can be seen picture
Not yet checked, but expect it will function even if unrooted.
Click to expand...
Click to collapse
Mobile OS: MIUI 10 Global 8.7.26 Beta or MIUI 9 V9.0.5.0.NCFMIEI_20171113.0000.00_7.0
Android 7.0
Phone Model : Redmi Note 4 (India) Snapdragon, 4GB RAM, 64GB ROM = Redmi Note 4X
PC Windows 10 64 bit
1) MIUI 10 Global 8.7.26 Beta Fastboot ROM was flashed after boot unlocked in fastboot mode
{there was trouble in unlocking the bootloader after mainboard replacement due to weak IR blater, with MIUI 9 can't verify account and in MIUI 10 error 20091 etc but solved by installing MIUI 8 (mido_global_images_V8.2.4.0.MCFMIDL_20170407.0000.00_6.0) immediately account was bound and after 72 hours it was possible to unlock , during this period flashing was done on test point mehod as deep flash also locked and it cannot boot with MIUI 7}
2) twrp-3.2.2-0-mido flashed in fastboot mode & immediately entered into Recovery mode (twrp) (Do not boot to android otherwise MIUI will replace twrp recovery with original recovery)
3) installed Magisk-v16.7_Bundle.zip at TWRP
4) Installed APTX-enabler-twrp.zip at TWRP
5) Installed lazyflasher-no-verity-opt-encrypt.zip (to avoid boot loop or replacement twrp with original recovery file)
Now Phone is booted to system , first time android starting took time
6) magisk app opened and Magisk16-Nougat-AptX.zip installed with Add Module section
Rebooted Android
NOW APTX STARTED WORKING ON REDMI NOTE 4 MIUI 10 or MIUI 9
most of the credit goes to participants at 4PDA
knreddy said:
Mobile OS: MIUI 10 Global 8.7.26 Beta or MIUI 9 V9.0.5.0.NCFMIEI_20171113.0000.00_7.0
Android 7.0
Phone Model : Redmi Note 4 (India) Snapdragon, 4GB RAM, 64GB ROM = Redmi Note 4X
PC Windows 10 64 bit
1) MIUI 10 Global 8.7.26 Beta Fastboot ROM was flashed after boot unlocked in fastboot mode
{there was trouble in unlocking the bootloader after mainboard replacement due to weak IR blater, with MIUI 9 can't verify account and in MIUI 10 error 20091 etc but solved by installing MIUI 8 (mido_global_images_V8.2.4.0.MCFMIDL_20170407.0000.00_6.0) immediately account was bound and after 72 hours it was possible to unlock , during this period flashing was done on test point mehod as deep flash also locked and it cannot boot with MIUI 7}
2) twrp-3.2.2-0-mido flashed in fastboot mode & immediately entered into Recovery mode (twrp) (Do not boot to android otherwise MIUI will replace twrp recovery with original recovery)
3) installed Magisk-v16.7_Bundle.zip at TWRP
4) Installed APTX-enabler-twrp.zip at TWRP
5) Installed lazyflasher-no-verity-opt-encrypt.zip (to avoid boot loop or replacement twrp with original recovery file)
Now Phone is booted to system , first time android starting took time
6) magisk app opened and Magisk16-Nougat-AptX.zip installed with Add Module section
Rebooted Android
NOW APTX STARTED WORKING ON REDMI NOTE 4 MIUI 10 or MIUI 9
most of the credit goes to participants at 4PDA
Click to expand...
Click to collapse
if i use magisk v18, may it work?
BadassBancho said:
if i use magisk v18, may it work?
Click to expand...
Click to collapse
Make sure you have an aptX compatible device too.
OverLord2901 said:
Make sure you have an aptX compatible device too.
Click to expand...
Click to collapse
My phone is redmi note 4x, but i was already installed magisk v18