Related
Hi, I am from Serbia, can I download some 7.0 for other country and flash my phone with odin? Tnx
Nobody to answer me? Omg... This forum, I dont belive.
Yes u can, što da ne?
Sent from my Nexus 6P using XDA-Developers Legacy app
Sure you can
milosrdni94 said:
Hi, I am from Serbia, can I download some 7.0 for other country and flash my phone with odin? Tnx
Click to expand...
Click to collapse
Yes you can, im from serbia , i flashed with UK Ireland firmware
Do you lose OTA updates once you flash this UK ireland firmware for example? Do you need to factory reset/root/install twrp or Odin is enough?
RelaxDA said:
Do you lose OTA updates once you flash this UK ireland firmware for example? Do you need to factory reset/root/install twrp or Odin is enough?
Click to expand...
Click to collapse
Odin is your friend, no need for root or twrp. OTA will work. I live in the Netherlands and dirty flashed the unbranded UK/Irish version on my son's G925F, which had a Nordic Marshmallow version installed. Worked fine. The Vodafone branded version for the Netherlands did not work, but maybe I should have removed the SIM card first, since this was no Vodafone SIM. You can change the language into any language you prefer.
Hi I have Android 7 for a week now. And I have a problem with power sawing mode... Looks like it doesn't work?
Anybody else have that problem or is there any solution?
Tnx
puchaa said:
Yes you can, im from serbia , i flashed with UK Ireland firmware
Click to expand...
Click to collapse
I am using N about 4 days, and i do factory reset after instalation, but I see in battery usage, at the 1st plase is ''device idle''?! this is not normal, I think... Do you some know what is a problem, and how to fix it? Thanks
Odin help
M1chiel said:
Odin is your friend, no need for root or twrp. OTA will work. I live in the Netherlands and dirty flashed the unbranded UK/Irish version on my son's G925F, which had a Nordic Marshmallow version installed. Worked fine. The Vodafone branded version for the Netherlands did not work, but maybe I should have removed the SIM card first, since this was no Vodafone SIM. You can change the language into any language you prefer.
Click to expand...
Click to collapse
I bought mine in Denmark, so Nordic version as well I guess, but I never tried using Odin, can you provide some more info? Do I need to factory reset or it keeps all my data, I am also on Marshmallow (G925FXXU5DPL5 baseband), It's Unlocked, any sim works in it.
RelaxDA said:
I bought mine in Denmark, so Nordic version as well I guess, but I never tried using Odin, can you provide some more info? Do I need to factory reset or it keeps all my data, I am also on Marshmallow (G925FXXU5DPL5 baseband), It's Unlocked, any sim works in it.
Click to expand...
Click to collapse
If you go to the firmware page of sammobile you will find the instructions for installing and using Odin. It's not complicated. I did a dirty flash and that went well. All apps and data were unaffected.
M1chiel said:
If you go to the firmware page of sammobile you will find the instructions for installing and using Odin. It's not complicated. I did a dirty flash and that went well. All apps and data were unaffected.
Click to expand...
Click to collapse
The download of firmware is painfully slow with free account, any way around it?
Knox s6 edge
Hi
I am installed android 7
My Knox 0*1
How to Rest Knox to 0*0
Nazari.76 said:
Hi
I am installed android 7
My Knox 0*1
How to Rest Knox to 0*0
Click to expand...
Click to collapse
No way to set back knox to 0x0
Hi All,
I'm having a bit of an issue. I updated from KangVIP 127 to 130, however upon doing so my mobile data is disabled, I reverted back to build 127 and it's still disabled. I tried searching for others with this issue or solutions and was having trouble finding anything of worth.
Entering the mobile network settings menu, immediately boots me back out to the main settings menu. I figure Ill likely have to do a backup and hard reflash, but I was hoping someone else had ideas.
What device? What version is your stock firmware? From what I experienced, KangVIP 130 needs stock firmware B135 for Mate 10 ALP-L29.
To get back to stock, just turn on OTA updates in KangVIP, connect to wifi, then download latest full firmware from Firmware Finder that's approved for your IMEI.
EngrVan said:
What device? What version is your stock firmware? From what I experienced, KangVIP 130 needs stock firmware B135 for Mate 10 ALP-L29.
To get back to stock, just turn on OTA updates in KangVIP, connect to wifi, then download latest full firmware from Firmware Finder that's approved for your IMEI.
Click to expand...
Click to collapse
Sorry its a BLA-L29 (Mate 10 Pro), 8.0.0.126.
Will using the OTA update deroot/lock bootloader?
Cerepol said:
Sorry its a BLA-L29 (Mate 10 Pro), 8.0.0.126.
Will using the OTA update deroot/lock bootloader?
Click to expand...
Click to collapse
Using the OTA will revert you back to stock so root is gone but bootloader will stay unlocked.
Hi to all
A Spanish mate, who has a BKL-AL00 flashed a wrong firmware, a firmware for other variant, now he has lost both IMEI. Service center said that the only solution for this is changing the motherboard.
I've read in other Honor subforum, I don't remember which, someone bring a solution flash a previous firmware and wait for the OTA.
Anyone has boot, ramdisk and system for BKL-AL00 to flash it?
Or know any other solution to this?
Santi_SAZ said:
Hi to all
A Spanish mate, who has a BKL-AL00 flashed a wrong firmware, a firmware for other variant, now he has lost both IMEI. Service center said that the only solution for this is changing the motherboard.
I've read in other Honor subforum, I don't remember which, someone bring a solution flash a previous firmware and wait for the OTA.
Anyone has boot, ramdisk and system for BKL-AL00 to flash it?
Or know any other solution to this?
Click to expand...
Click to collapse
Boot to erecocery and try to connect to wifi and see if it is able to download the patch, i had same issue and fixed this way. Being AL10 it should be able to download the firmware
shashank1320 said:
Boot to erecocery and try to connect to wifi and see if it is able to download the patch, i had same issue and fixed this way. Being AL10 it should be able to download the firmware
Click to expand...
Click to collapse
Which patch? Do you mean an OTA?
Many thanks
Santi_SAZ said:
Which patch? Do you mean an OTA?
Many thanks
Click to expand...
Click to collapse
It will be full firmware similar to - BKL-L09C675BXYZ- Full.
If by any chance that appears on the screen, you can proceed with 100% guarantee it will solve the imei issue
shashank1320 said:
It will be full firmware similar to - BKL-L09C675BXYZ- Full.
If by any chance that appears on the screen, you can proceed with 100% guarantee it will solve the imei issue
Click to expand...
Click to collapse
I'll tell to him to do this
Thanks
Hi, i have a mate 20 pro model c212 (at&t mexico), i want to install a new firmware for example c62 or c432, i can? or not? Pleas help me!
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
oslo83 said:
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
Click to expand...
Click to collapse
I am currently in version 9.1.320 of att mexico (212), but the Telcel version (C69) is updated faster, what I fear is that EMUI 10 does not arrive because of the att issue
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
oslo83 said:
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
Click to expand...
Click to collapse
And you know how to install an update if my operator does not?
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Shaolin36 said:
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Click to expand...
Click to collapse
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
oslo83 said:
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
Click to expand...
Click to collapse
Hm, when I used FH a while back it switched me to C636 - and every OTA I received was C636 - I couldn't return to C432 via any method until I tried dload and it worked for me. It may be because my device is natively C432.
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
oslo83 said:
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
Click to expand...
Click to collapse
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Prounder15 said:
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Click to expand...
Click to collapse
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
I though he was speaking about how to softrebrand with FunkyHuawei...
oslo83 said:
I though he was speaking about how to softrebrand with FunkyHuawei...
Click to expand...
Click to collapse
Well if he was speaking about that then there's no guidance I can provide him. It's a paid service and doesn't really require a 'guide' as it's simple. He can check out their website, but regardless - if he wishes to try the dload method then there's there guide.
Shaolin36 said:
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
Click to expand...
Click to collapse
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Prounder15 said:
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Click to expand...
Click to collapse
Search on androidhost.ru
Shaolin36 said:
Search on androidhost.ru
Click to expand...
Click to collapse
My model is LYA-09 is there any problem if I install some firmware for the LYA-L29?
In My model i only found:
Huawei Mate 20 Pro LYA-L09 hw eu Laya-L09C 9.0.0.266(C432E10R1P16) Firmware 9.0.0 r3 EMUI9.0.0 05015LBD [androidhost.ru].zip
In LYA-L29:
Huawei Mate 20 Pro LYA-L29 hw eu Laya-L29C 9.1.0.310(C432E10R1P16).DLOAD.zip
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Limeybastard said:
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
Deevusone said:
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Click to expand...
Click to collapse
Yes, it should work. I'd be happy to help you if you add me on Telegram. @Shaolin36
Hi friends,
I dirty flash L09 firmware on L04 everything is very good. But i want to go back with canadian firmware EMUI 10
Can somebody upload the canadian firmware EMUI 10 or from where can i download the orignal firmware.
thanks
may2014 said:
Hi friends,
I dirty flash L09 firmware on L04 everything is very good. But i want to go back with canadian firmware EMUI 10
Can somebody upload the canadian firmware EMUI 10 or from where can i download the orignal firmware.
thanks
Click to expand...
Click to collapse
Same here been waiting for it
EMUI10 update on Rogers with vpn
Hi guys,
If you have NordVpn installed (or any vpn providers), connect to Hong Kong and check for update. My Rogers phone with a rogers sim card in it found the emu10 update and it installed without a problem.
Haven't tried other countries, but Hong Kong worked.
i dirty flashed same as you, enter erecovery and download firmware from there just finished here with bell back on my stock cust no need to backup as it does not wipe
cre4per said:
i dirty flashed same as you, enter erecovery and download firmware from there just finished here with bell back on my stock cust no need to backup as it does not wipe
Click to expand...
Click to collapse
Didn't work for me... got an error failing to retrieve package info
Joel_Bruiners said:
Didn't work for me... got an error failing to retrieve package info
Click to expand...
Click to collapse
Iv got that also untill iv seen other people on bell getting it then when I tried again it worked. I think it only works once it's out for your carrier.