Hi All,
I'm having a bit of an issue. I updated from KangVIP 127 to 130, however upon doing so my mobile data is disabled, I reverted back to build 127 and it's still disabled. I tried searching for others with this issue or solutions and was having trouble finding anything of worth.
Entering the mobile network settings menu, immediately boots me back out to the main settings menu. I figure Ill likely have to do a backup and hard reflash, but I was hoping someone else had ideas.
What device? What version is your stock firmware? From what I experienced, KangVIP 130 needs stock firmware B135 for Mate 10 ALP-L29.
To get back to stock, just turn on OTA updates in KangVIP, connect to wifi, then download latest full firmware from Firmware Finder that's approved for your IMEI.
EngrVan said:
What device? What version is your stock firmware? From what I experienced, KangVIP 130 needs stock firmware B135 for Mate 10 ALP-L29.
To get back to stock, just turn on OTA updates in KangVIP, connect to wifi, then download latest full firmware from Firmware Finder that's approved for your IMEI.
Click to expand...
Click to collapse
Sorry its a BLA-L29 (Mate 10 Pro), 8.0.0.126.
Will using the OTA update deroot/lock bootloader?
Cerepol said:
Sorry its a BLA-L29 (Mate 10 Pro), 8.0.0.126.
Will using the OTA update deroot/lock bootloader?
Click to expand...
Click to collapse
Using the OTA will revert you back to stock so root is gone but bootloader will stay unlocked.
Related
Hello! Has anyone updated their Mate 10 standard to firmware ALP-L29 8.0.0.126? I found it on Huawei firmware finder but it says it's not approved for installation. Was wondering if someone risked it and installed anyways. Thanks!
I am on this firmware region 636.standyby battery life is improved for me and also wifi issues are gone. I flashed it via funkyhuawei though
trd_jzx100 said:
I am on this firmware region 636.standyby battery life is improved for me and also wifi issues are gone. I flashed it via funkyhuawei though
Click to expand...
Click to collapse
Yeah. Same region here (636) but I'm still on .119 version. Hmm. No issues with camera? I might update now if it's stable. Thanks for the feedback!
Camera works fine for me
I tried rebranding to c342 from c185 and reverted back but my sim doesn't work and I presume my baseband was updated to European and didn't go back to the middle eastern one.
Could that be? Any advise how to fix it?
fabio87 said:
I tried rebranding to c342 from c185 and reverted back but my sim doesn't work and I presume my baseband was updated to European and didn't go back to the middle eastern one.
Could that be? Any advise how to fix it?
Click to expand...
Click to collapse
UPDATE: Problem fixed using HuRUpdater and flashing stock roms zips with it. HWOTA8 doesn't fully flash all partitions so I advise using this one instead.
Please close thread.
fabio87 said:
I tried rebranding to c342 from c185 and reverted back but my sim doesn't work and I presume my baseband was updated to European and didn't go back to the middle eastern one.
Could that be? Any advise how to fix it?
Click to expand...
Click to collapse
Hi, do you have a backup of your P20 lite C185? If you have please help me fix my phone, I have the same phone with same build no, it has been nearly a month my has been bricked. Thanks in advance.
Hi,
Does anyone know if the Mate 20 Pro rooting and flashing the fw guides here are still working and should still be used? I do have a code to unlock my bootloader, but it appears that the guides, and the software recommended to install/use in those guides are either outdated or no longer accessible.
I'm kind of reluctant to follow the guides to root and flash my fw, that my risk the chance of bricking my phone. Does anyone know of any guides that still work today?
I'm currently on 9.0.0.265(C636E10) that was flashed by the previous owner through FunkyHuawei. The phone was purchased from a Canadian carrier (Rogers) and the fw should be associated to the C792 region. I would like to root and re-flash my fw back to the C792 region and start receiving OTA updates, but I'm unable to find a complete and up-to-date guide to help me achieve this.
Any help from you experts is greatly appreciated.
download the full dload firmware and flash via usb/otg method.
https://easy-firmware.com/index.php?a=downloads&b=file&id=161130
https://forum.xda-developers.com/ma...-to-update-huawei-mate-20-pro-locked-t3897480
side_flip15 said:
download the full dload firmware and flash via usb/otg method.
https://easy-firmware.com/index.php?a=downloads&b=file&id=161130
https://forum.xda-developers.com/ma...-to-update-huawei-mate-20-pro-locked-t3897480
Click to expand...
Click to collapse
Thanks! I downloaded the firmware from firmware finder, will that work?
Deevusone said:
Thanks! I downloaded the firmware from firmware finder, will that work?
Click to expand...
Click to collapse
No. you need the service firmware (dload)
this... https://easy-firmware.com/index.php?a=downloads&b=file&id=161130
side_flip15 said:
No. you need the service firmware (dload)
this... https://easy-firmware.com/index.php?a=downloads&b=file&id=161130
Click to expand...
Click to collapse
What's the difference b/w the service firmware from easy-firmware vs the firmware from firmware finder?
Deevusone said:
What's the difference b/w the service firmware from easy-firmware vs the firmware from firmware finder?
Click to expand...
Click to collapse
service firmware also updates cust and preload specific to your region.
Thanks! I was able to successfully update my fw to 9.1 and back to my region by using this method.
Hi friends,
I dirty flash L09 firmware on L04 everything is very good. But i want to go back with canadian firmware EMUI 10
Can somebody upload the canadian firmware EMUI 10 or from where can i download the orignal firmware.
thanks
may2014 said:
Hi friends,
I dirty flash L09 firmware on L04 everything is very good. But i want to go back with canadian firmware EMUI 10
Can somebody upload the canadian firmware EMUI 10 or from where can i download the orignal firmware.
thanks
Click to expand...
Click to collapse
Same here been waiting for it
EMUI10 update on Rogers with vpn
Hi guys,
If you have NordVpn installed (or any vpn providers), connect to Hong Kong and check for update. My Rogers phone with a rogers sim card in it found the emu10 update and it installed without a problem.
Haven't tried other countries, but Hong Kong worked.
i dirty flashed same as you, enter erecovery and download firmware from there just finished here with bell back on my stock cust no need to backup as it does not wipe
cre4per said:
i dirty flashed same as you, enter erecovery and download firmware from there just finished here with bell back on my stock cust no need to backup as it does not wipe
Click to expand...
Click to collapse
Didn't work for me... got an error failing to retrieve package info
Joel_Bruiners said:
Didn't work for me... got an error failing to retrieve package info
Click to expand...
Click to collapse
Iv got that also untill iv seen other people on bell getting it then when I tried again it worked. I think it only works once it's out for your carrier.
Hello everyone, i'm waiting for update to emui 10 in morocco for my BLA-L29 and stiil don't receive it but k got in FF the update and wanna ask if i can use it or not. And if i can use it which version can i use?
Huawei mate 10 pro BLA-L29
No body knows ?
simuzer said:
No body knows ?
Click to expand...
Click to collapse
Check from HiCare. You can see update there.
alycann said:
Check from HiCare. You can see update there.
Click to expand...
Click to collapse
there is not for c432.
tissot73 said:
if i can use it or not
Click to expand...
Click to collapse
Not, theres no way to flash FW from Firmware finder. You can upgrade to higher EMUI version flashing Service ROM using dload method only. Afaik there's no Service ROM EMUI 10 for BLA models yet. IMO wait for OTA update.
P.S.: The best method to upgrade via Service ROM is searching for the Service ROM on https://androidhost.ru/ and doing the dload method. Process will erase all the data from your device !
(Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader. It is very important to choose your region! (C636, C432, etc.)
You have found some way to install it, since and tried in all ways and still do not know how to update it[emoji26]
Enviado desde mi RMX1931 mediante Tapatalk