I like the case that comes with the phone, but as you know it doesn't protect upper front side and rear cameras. I've purchached a similar one
https://www.aliexpress.com/item/32984767841.html
but its side faces don't fully fit, it's not mine's fault, there are some reviews saying the same
Any other case like that? I've tried a transparent one and is ok, but I'd rather a transparent black one. So few cases for this phone...
Nillkin Nature Series TPU case has a transparent/gray version, which has a slightly raised edge around the camera, protecting it nicely when you put down your phone on flat surfaces. Overall, it's a great buy, as usual with this brand. Check it out, maybe it suits you.
Nate91 said:
Nillkin Nature Series TPU case has a transparent/gray version, which has a slightly raised edge around the camera, protecting it nicely when you put down your phone on flat surfaces. Overall, it's a great buy, as usual with this brand. Check it out, maybe it suits you.
Click to expand...
Click to collapse
It looks a littler thicker than the original, specially at the corners but I'll give it a try
poled said:
It looks a littler thicker than the original, specially at the corners but I'll give it a try
Click to expand...
Click to collapse
I've got this one and it's very good also together with a screen tempered glas:
https://m.nl.aliexpress.com/item/329...3da24c4dHcDjIL changed to
https://m.de.aliexpress.com/item/32...er_id=dff21a2a89574552be0deeb56bc4cf03&is_c=Y
poled said:
I like the case that comes with the phone, but as you know it doesn't protect upper front side and rear cameras. I've purchached a similar one
https://www.aliexpress.com/item/32984767841.html
but its side faces don't fully fit, it's not mine's fault, there are some reviews saying the same
Any other case like that? I've tried a transparent one and is ok, but I'd rather a transparent black one. So few cases for this phone...
Click to expand...
Click to collapse
I ordered one. Thanks for sharing.
smohanv said:
I ordered one. Thanks for sharing.
Click to expand...
Click to collapse
Did you read my post? the case doesn't fully fit on the sides...
poled said:
Did you read my post? the case doesn't fully fit on the sides...
Click to expand...
Click to collapse
OMG. I didn't read your posting fully. I clicked on the link and seems good. I will return if doesn't fit.
Thanks for the heads-up.
Nate91 said:
Nillkin Nature Series TPU case has a transparent/gray version, which has a slightly raised edge around the camera, protecting it nicely when you put down your phone on flat surfaces. Overall, it's a great buy, as usual with this brand. Check it out, maybe it suits you.
Click to expand...
Click to collapse
thanks for reccommend this one i use grey version on my Mi 9 8/128 Lavender Pink the shade colour going kinda blue from pink i love it
I can recommend that
Http://aliexpress.com/item/33003009449.html
poled said:
I like the case that comes with the phone, but as you know it doesn't protect upper front side and rear cameras. I've purchached a similar one
https://www.aliexpress.com/item/32984767841.html
but its side faces don't fully fit, it's not mine's fault, there are some reviews saying the same
Any other case like that? I've tried a transparent one and is ok, but I'd rather a transparent black one. So few cases for this phone...
Click to expand...
Click to collapse
The ones from Spigen are great
Related
Case: http://www.amazon.com/gp/product/B00JW7AYYE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I purchased this case from amazon. With the thought in-mind that I could create my own graphics for the frosted back. The materials for the case are as expected, and seem to have a nice quality and feel to them. The black rubberized area around the perimeter of the case doesn't seem to get in the way of any charging, headphones, or the ir blaster, everything seems to work well.
The frosted back has a noticeably different texture and hardness than the rubberized perimeter. Overall the case doesn't add much by way of bulk or size to the phone, and the ability to create your own graphics is wonderful. Great case, I'm immensely satisfied!
I've attached a number of photos showing some random designs I've created using some random stuff from google images, and attached a zip with the photoshop template to create your own. Enjoy!
Foxgguy2001 said:
Case: http://www.amazon.com/gp/product/B00JW7AYYE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I've attached a number of photos showing some random designs I've created using some random stuff from google images, and attached a zip with the photoshop template to create your own. Enjoy!
Click to expand...
Click to collapse
Very nice. Creative.
Definitely a solid case, although I find the hard edges of the case change the feel of the phone in my hand a bit too much for preference. Makes it more angular rather than super slim and curved. That said, I may not be able to resist slapping the Supcase back on with a custom design once in a while!
Thanks for sharing the template!
I also have this case and can confirm it is great quality and feels nice in the hand. But a bit bulky for me so will try the official Quickcicle case.
jah said:
I also have this case and can confirm it is great quality and feels nice in the hand. But a bit bulky for me so will try the official Quickcicle case.
Click to expand...
Click to collapse
Same. I mean it's a thin case, but the phone is big. I might prefer even thinner case even at the cost of don't protection. Think this case will protect well. I don't find the edges a problem.
Have my eye on oem black cover replacement case eventually
I have the supcase as well and was at first amazed by its looks and build quality but eventually let down by its ergonomics and feel in the hand. My Caseology just feels way more comfortable to use while still looking pretty good
Transmission sent from my LG G3.
what type of printer
can you tell us what type of printer you used to make those designs ? and what kind of paper ? I just ordered the case
thanks in advance:good:
I ordered the Grey/Frost Clear one from Amazon, and it looks great on my white G3. The .3mm iCarez glass screen protector fits like a glove inside the case's bumpers on the front, making the whole thing completely seamless. Once I get my wireless charging sticker (and maybe a MicroSD down the line sometime), my G3 is set to go - I am EXTREMELY pleased with this combination.
Illrigger said:
I ordered the Grey/Frost Clear one from Amazon, and it looks great on my white G3. The .3mm iCarez glass screen protector fits like a glove inside the case's bumpers on the front, making the whole thing completely seamless. Once I get my wireless charging sticker (and maybe a MicroSD down the line sometime), my G3 is set to go - I am EXTREMELY pleased with this combination.
Click to expand...
Click to collapse
Almost exact same setup, except I have the Black/Frost one. Happy too.
lexluthor said:
Almost exact same setup, except I have the Black/Frost one. Happy too.
Click to expand...
Click to collapse
I was going to get the same one, but some post here are giving me second thoughts. how are the ergonomics?
firecutter23 said:
can you tell us what type of printer you used to make those designs ? and what kind of paper ? I just ordered the case
thanks in advance:good:
Click to expand...
Click to collapse
I used a laser color printer... My inkjet just wasn't good enough quality, though, your milage may vary!
patthebaker17 said:
I was going to get the same one, but some post here are giving me second thoughts. how are the ergonomics?
Click to expand...
Click to collapse
Imagine the phone being 2mm bigger in all ways except the front, with grippy rubber sides and you have this case. The shape is pretty much identical to the phone itself; same curve to the back and all.
Awesome! I also have this case and this material is very high quality. Great idea and job, congrats, using this template for made my covers... But, i tried create one template for case Spigen Ultra Hybrid and don't have success. So, are you can help-me? Ty :fingers-crossed:
Any chance you can scan the empty case and send me a Png or jpg ?
I have don't scanner, but took some pictures using ruler. Hope that helps.
Remove the spaces from the link.
Thank you for your attention and help.
dropbox. com /sh/r7lf0j20j5me1be/AAArzoLGCA8_wDmgRls3YQ8La
mine just arrived, i bought the black/frost clear one, too.
really pleased about how it fits, how it feels, and how it looks like. the shape of the bumper sides and the lips, the micro usb and 3.5mm port cut out, everything feels great!
i'm just worried about how long the frost clear black will hold up until it went yellowish, just like any transparent materials.
How is the back holding up from scratches?
Androider4Life said:
How is the back holding up from scratches?
Click to expand...
Click to collapse
No scratches at all on mine. Looks as good as they day I got it.
http://www.amazon.com/gp/product/B00OH4HY3G/ref=od_aui_detailpages00?ie=UTF8&psc=1
Has any users here used or have this case for their nexus 6? I already paid for it and it will be here tomorrow using amazing 1 day shipping. Curious what others think.
I have it. Bought it and the ringke fusion same time. I like both, and quality seems to be identical. That being said I find I use the ringke more as it has the accent depression on the back that feels good in hand, as well as the protruding buttons are easier to distinguish.
The upside if the spigen however, is that it seems to have less of a rainbow effect on the back at certain angles.
I have this case, I love it because of the clear back, really shows off the beauty of the Nexus 6. However, as mentioned by the other poster, this case makes it very hard to distinguish the power and volume buttons. The buttons on my case also weren't very tactile, I always find myself hitting the wrong one. But, I still thoroughly enjoy this case, it protects the Nexus 6 very well.
patheticpuma said:
I have it. Bought it and the ringke fusion same time. I like both, and quality seems to be identical. That being said I find I use the ringke more as it has the accent depression on the back that feels good in hand, as well as the protruding buttons are easier to distinguish.
The upside if the spigen however, is that it seems to have less of a rainbow effect on the back at certain angles.
Click to expand...
Click to collapse
Thanks. I am putting a dbrand skin on it...blue one actually. So excited about this. Thanks I always used Spigen for all my devices. Just figured I ask. Is this a slip on type one or is it clip like the metal ones? I didnt really find anything about how it gets put on.
I just push the bottom of the phone in and snap it down in. The border is tpu, so it has some flex while offering some drop protection.
I use a black carbon fiber slickwrap on my n6, and it really does emphasize the beauty of this beast.
patheticpuma said:
I just push the bottom of the phone in and snap it down in. The border is tpu, so it has some flex while offering some drop protection.
I use a black carbon fiber slickwrap on my n6, and it really does emphasize the beauty of this beast.
Click to expand...
Click to collapse
I checked via web for a review of this (video) is there one?
I know there is one comparing the 2 cases I have, I ordered both right after watching it. I'm at work right now so I can't really track down the link.
patheticpuma said:
I know there is one comparing the 2 cases I have, I ordered both right after watching it. I'm at work right now so I can't really track down the link.
Click to expand...
Click to collapse
thats ok i already bought it. The last thing I am wonder is do u have a screen protector on it with this case or the glass screen protectors? will they work with this case?
The glass do yes, but I got rid of mine because I hate the halo. I'm using the plastic one that came with my ringke.
Nice case ..
I originally bought the Karbon, black tpu & ebony wood & I liked them alot so I was kicking my self that I didn't order the red one, so I ordered one & a otg cable. I'm glad I decided to buy the red one cause its the only case that's sold out.
Can you please show the front, too?
You literally just showed the back
I also got the same case it arrived today. Here is view of every corner.
Pros:
Not thick
Nice weight to it
Good grip.
Color is amazing with black.
Good quality.
Cons:
Doesn't protect the front very good.
The lip is very small.
I've just posted a video with this the Silicone case in it, I also do a screen test with it and the Otterbox!
niijonodhg said:
I've just posted a video with this the Silicone case in it, I also do a screen test with it and the Otterbox!
Click to expand...
Click to collapse
Thanks.
alukarulz said:
I also got the same case it arrived today. Here is view of every corner.
Pros:
Not thick
Nice weight to it
Good grip.
Color is amazing with black.
Good quality.
Cons:
Doesn't protect the front very good.
The lip is very small.
Click to expand...
Click to collapse
I think I'm gonna get this
ddaharu said:
I think I'm gonna get this
Click to expand...
Click to collapse
Best 20 bucks spent.
I have the black TPU case,
A couple of things i don't like:
- Extreme dust magnet.
- The lid on the lower part of the phone is to small, probably because of the lower part cutout. this makes it more vulnerable when it drops.
But overall the grip is great and the does not make the phone to bulky at all
alukarulz said:
I also got the same case it arrived today. Here is view of every corner.
Pros:
Not thick
Nice weight to it
Good grip.
Color is amazing with black.
Good quality.
Cons:
Doesn't protect the front very good.
The lip is very small.
Click to expand...
Click to collapse
I almost wanted to get it but this is what I don't like
I have the flip cover and it's kinda nice, so I'll keep it that way. Very good protection
Nice! Thanks for sharing! Think im going to purchase this
DarkExistence said:
Nice! Thanks for sharing! Think im going to purchase this
Click to expand...
Click to collapse
The red case is hard
Rebel7022 said:
The red case is hard
Click to expand...
Click to collapse
As in not flexible? My sister has one for her OPX, has the nice fabric inside and the soft touch on the back. Not being flexible for this type of case is a good thing tbh
DarkExistence said:
As in not flexible? My sister has one for her OPX, has the nice fabric inside and the soft touch on the back. Not being flexible for this type of case is a good thing tbh
Click to expand...
Click to collapse
No sorry. Hard means good, like " that case is hard" but the case isn't hard it's rubberish, I like it a lot
Rebel7022 said:
No sorry. Hard means good, like " that case is hard" but the case isn't hard it's rubberish, I like it a lot
Click to expand...
Click to collapse
Ah right haha. Yep definitely going to get it soon ! Thanks!
It looks nice, only wish it came in different colours.
A Guy Called Revive said:
It looks nice, only wish it came in different colours.
Click to expand...
Click to collapse
I believe it only comes in black and red . Previous devices used to have blue and white as well which were cool
DarkExistence said:
I believe it only comes in black and red . Previous devices used to have blue and white as well which were cool
Click to expand...
Click to collapse
I would like a dark blue one myself! I feel right is way to bright for me
It's definetley hard, and it's definetley a premium feeling case. I've had to stop using mine though as it just collects so much crap, I end up wiping it down every five minutes! and because of that the Red has started to fade.
I had my Red TPU since launch and have not had an issue. I haven't had the problem with it collecting dust/lint or anything. It got a bit printy while I was eating wings and on my phone, so I won't do that anymore. ...jk. It will get the occasional oily print, but that's it. I much prefer it because of the fabric backing. You always have that issue of stuff getting behind the case and scratching it up. I feel the backing will help a lot.
First time for me to use a screen protector. I've used the factory ones on my previous OP devices (6T, 6, 5T, 3). The 6T screen protector appears to be utter crap. After one month of normal usage it not only developed a few small bubbles but also a nice tear in it right over the keyboard making it a downright nuance to use. I could deal with the bubbles but the tear in it was the catalyst to get rid of it. Iit was like a zit and was rough to run your finger over while using keyboard. No bueno.
So I dug around a few threads didn't see much success. Poor fitment. Poor seller. Rainbow effects. etc. etc. etc.
Decided to make a trip to my local T-Mobile store. Bought the Puregear unit they had in stock. It's a bit pricey $39.99+tax but fits like a glove. Screen looks nice. The stock case fits over it without anything obvious protruding.
Other than cost cannot complain. Weird it's not listed on Puregear's website...
EDIT: Edited as I got a second camera to take the photos of it on the OnePlus 6T.
So is it slightly wider than the screen? Cause it looks very similar to the Nillkin which is only 10 bucks.
I think it lines up well with the screen. For some reason the last photo I put up isn't showing so I"ll throw it here.
Upon further inspection, there may be a faint rainbow effect actually on the edges.
Nosferatu. said:
I think it lines up well with the screen. For some reason the last photo I put up isn't showing so I"ll throw it here.
Upon further inspection, there may be a faint rainbow effect actually on the edges.
Click to expand...
Click to collapse
So it's the same as the Nillkin. I will stay with my 10 dollar protector.
borijess said:
So it's the same as the Nillkin. I will stay with my 10 dollar protector.
Click to expand...
Click to collapse
Here goes a similar pic.
borijess said:
So it's the same as the Nillkin. I will stay with my 10 dollar protector.
Click to expand...
Click to collapse
Which model is it ? The H or the H+Pro ?
Yeah im also interested which version are you useing from the nikilin one ?
Guirmod said:
Which model is it ? The H or the H+Pro ?
Click to expand...
Click to collapse
I am using the Nillkin H+I bought from Amazon.
borijess said:
I am using the Nillkin H+I bought from Amazon.
Click to expand...
Click to collapse
Thanks ! I bought it instantly
Guirmod said:
Thanks ! I bought it instantly
Click to expand...
Click to collapse
Go to my post 294 for some tips. Make sure you align it perfectly. There is really no room for error on the sides.
https://forum.xda-developers.com/on...-protector-getting-oneplus-6t-t3859266/page30
borijess said:
So it's the same as the Nillkin. I will stay with my 10 dollar protector.
Click to expand...
Click to collapse
The puregear doesn't do it that badly and not near the top. It's on the sides near the middle and minimal at best.
Nosferatu. said:
The puregear doesn't do it that badly and not near the top. It's on the sides near the middle and minimal at best.
Click to expand...
Click to collapse
The top and bottom of the Nillkin are perfect it's just the sides that are not forgiving it skewed to one side. If you align it as close to perfect you will be happy with it.
borijess said:
So it's the same as the Nillkin. I will stay with my 10 dollar protector.
Click to expand...
Click to collapse
borijess said:
The top and bottom of the Nillkin are perfect it's just the sides that are not forgiving it skewed to one side. If you align it as close to perfect you will be happy with it.
Click to expand...
Click to collapse
:good::good:
You win some you lose some. Opted to pay for easy return and easy testing. I use the phone enough that I didn't want to wait thanks to the stock one getting messed up badly.
Now, I need to find one for the OnePlus 6 (not the 6T). My wife wants one for her device. Any recommendations on that front?
Nosferatu. said:
:good::good:
You win some you lose some. Opted to pay for easy return and easy testing. I use the phone enough that I didn't want to wait thanks to the stock one getting messed up badly.
Now, I need to find one for the OnePlus 6 (not the 6T). My wife wants one for her device. Any recommendations on that front?
Click to expand...
Click to collapse
Don't have a 6 but Nillkin I think makes one for the 6 too.
By the way if you are happy with yours that's all that matters. I was real close on buying the Puregear. If the Nillkin did not work out I would of bought it too.
I went with the official op6t tempered glass protector. Works great perfect fit.
borijess said:
Go to my post 294 for some tips. Make sure you align it perfectly. There is really no room for error on the sides.
https://forum.xda-developers.com/on...-protector-getting-oneplus-6t-t3859266/page30
Click to expand...
Click to collapse
Thanks a lot it seems like the best choice after the PureGear one
I just picked up a Puregrear today and I have to say I'm a little disappointed. The install was fine and adheres smoothly without any bubbles. But it's slightly too narrow. It fits well on the top and bottom but on both sides there is a sliver of visible screen that is not covered by the glass. It's not all that noticeable if looking directly dead on, but if the phone is even slightly angled you see thick line across the screen and it's a little annoying.
m4570d0n said:
I just picked up a Puregrear today and I have to say I'm a little disappointed. The install was fine and adheres smoothly without any bubbles. But it's slightly too narrow. It fits well on the top and bottom but on both sides there is a sliver of visible screen that is not covered by the glass. It's not all that noticeable if looking directly dead on, but if the phone is even slightly angled you see thick line across the screen and it's a little annoying.
Click to expand...
Click to collapse
Exactly what I said. It's no different than dozens of protectors on Amazon for under $10 in that regard. Totally not worth it
Sent from my ONEPLUS A6013 using Tapatalk
m4570d0n said:
I just picked up a Puregrear today and I have to say I'm a little disappointed. The install was fine and adheres smoothly without any bubbles. But it's slightly too narrow. It fits well on the top and bottom but on both sides there is a sliver of visible screen that is not covered by the glass. It's not all that noticeable if looking directly dead on, but if the phone is even slightly angled you see thick line across the screen and it's a little annoying.
Click to expand...
Click to collapse
I also just applied a Puregear and have a small strip on the right side of the screen that isn't covered, but on the left side it lined up. I had also ordered and returned the XtremeGuard TGSP because it didn't cover the entire screen, and the Puregear does significantly better despite not quite covering everything.
Overall, I really like the look and feel of the glass compared the preapplied protector, and I don't notice the uncovered part unless I look for it. I'll keep it for now, but if I needed a new protector I'd probably try the official OP glass or whatever else is performing well for other folks here.
FWIW, I was able to use a coupon code to get a $10 discount when I ordered it from their website, so at least I didn't pay full price.
no driver said:
I also just applied a Puregear and have a small strip on the right side of the screen that isn't covered, but on the left side it lined up. I had also ordered and returned the XtremeGuard TGSP because it didn't cover the entire screen, and the Puregear does significantly better despite not quite covering everything.
Overall, I really like the look and feel of the glass compared the preapplied protector, and I don't notice the uncovered part unless I look for it. I'll keep it for now, but if I needed a new protector I'd probably try the official OP glass or whatever else is performing well for other folks here.
FWIW, I was able to use a coupon code to get a $10 discount when I ordered it from their website, so at least I didn't pay full price.
Click to expand...
Click to collapse
What coupon code?
Picked up the McClaren 5g version from T-Mobile yesterday, and I'm in love with the phone, throughout. Beautiful design, hardware, software. Everything.
I wanted a protective case however did not want to cover the beautiful back.
I figure the combo is cheap enough that I can get something else if this doesn't fit my needs.
Anyone else tried either of the two products?
Crisisx1 said:
Picked up the McClaren 5g version from T-Mobile yesterday, and I'm in love with the phone, throughout. Beautiful design, hardware, software. Everything.
I wanted a protective case however did not want to cover the beautiful back.
I figure the combo is cheap enough that I can get something else if this doesn't fit my needs.
Anyone else tried either of the two products?
Click to expand...
Click to collapse
What combo are you referring to? (No link or images provided.)
RhinoShield has the Crash Guard bumper & a clear skin for the backside (screen protector also available).
This combo definitely fits what you're looking for.
As with all of the Crash Guard bumpers, it adds quite a bit of an increase to the overall width of the phone. If that isn't a factor one way or the other, I'd say you need to look no further.
I'm sure there's some aluminum bumpers available from eBay & the like, but, they offer little to no protection & likely have an even more uncomfortable grip vs the included case or, the RhinoShield Bumper.
Sent from my OnePlus7TProNR using XDA Labs
Hmm not sure why the photos didn't post. Trying again.
Crisisx1 said:
Hmm not sure why the photos didn't post. Trying again.
Click to expand...
Click to collapse
THX for posting the pix. :good:
There's several different mfgs with this design to be found on Amazon/e-Bay/Ali Express, etc......
I like the idea of clear cases in general, but, most seem to have some nagging traits....
The rainbow effect comes to mind right off the bat, as well as being a fingerprint magnet.
Most don't wear well after a few weeks of use, with scuffs/scratches.
A matte clear case may negate most of the above, but, likely will obscure the true appearance of the decorative backside.
I've seen some all-glass cases, encasing the entire phone, front & back, might not be a bad way to go.
https://www.amazon.com/Magnetic-Samsung-Double-Sided-Tempered-Protection/dp/B07WR7DKD1
Sent from my OnePlus7TProNR using XDA Labs
KOLIOSIS said:
THX for posting the pix. :good:
There's several different mfgs with this design to be found on Amazon/e-Bay/Ali Express, etc......
I like the idea of clear cases in general, but, most seem to have some nagging traits....
The rainbow effect comes to mind right off the bat, as well as being a fingerprint magnet.
Most don't wear well after a few weeks of use, with scuffs/scratches.
A matte clear case may negate most of the above, but, likely will obscure the true appearance of the decorative backside.
I've seen some all-glass cases, encasing the entire phone, front & back, might not be a bad way to go.
https://www.amazon.com/Magnetic-Samsung-Double-Sided-Tempered-Protection/dp/B07WR7DKD1
Click to expand...
Click to collapse
I've had luck with uag clear cases, however, as you know they aren't truly 100% transparent and clear due to their honey comb pattern design.
That all glass case is a pretty interesting design, never seen it before. I wouldn't imagine it would look as good after 3,4 drops compared to a plastic /poly case.
I'm definitely not opposed to trying a different combo if this one doesn't work, as it was less than 20 dollars. I did look into the dome whitestone glass sp, however I'm opposed to applying an actual adhesive to my screen.
Any other decent glass sp that doesn't require adhesive?
Here's the case. After closely examining the edges of the phone and case, I am not sure this screen protector will be compatible as I will interfere at edges and pull up.
The screen protector and case fit perfectly. A bit different installation method then what I'm usually used to, but got it perfect on the second try. Very pleased.
Crisisx1 said:
The screen protector and case fit perfectly. A bit different installation method then what I'm usually used to, but got it perfect on the second try. Very pleased.
Click to expand...
Click to collapse
Do you have a Link? The one above didn't Work.
sh1z0 said:
Do you have a Link? The one above didn't Work.
Click to expand...
Click to collapse
Here is the screen protector
https://www.amazon.com/dp/B07QTXX694/ref=cm_sw_r_other_apa_i_JDjaEb9W5M6QK
Here is the install video
Here is pic trying to show the case edge and sp slight separation. A bit hard to see, but at $8 for 3 sp, I'm surprised by the quality of the sp.
Update.. I've been using the 7t pro mclaren case with the sp and fits flawlessly
Crisisx1 said:
Here's the case. After closely examining the edges of the phone and case, I am not sure this screen protector will be compatible as I will interfere at edges and pull up.
Click to expand...
Click to collapse
Your case isn't even compatible with the phone. You are covering the laser autofocus area on the back. The 7 Pro cases don't have the necessary cutout. You need a 7T Pro case.
I know this was already addressed in a different thread. No longer using that case. Now using the one that came with the mclaren.
LLStarks said:
Your case isn't even compatible with the phone. You are covering the laser autofocus area on the back. The 7 Pro cases don't have the necessary cutout. You need a 7T Pro case.
Click to expand...
Click to collapse
Up
Im using Supcase Unicorn Beetle case with an Alinsea Screen Protector. Everything fits perfectly.
lilaznboi5582 said:
Im using Supcase Unicorn Beetle case with an Alinsea Screen Protector. Everything fits perfectly.
Click to expand...
Click to collapse
I will get my OP7T Pro in two weeks and I'm going to buy exactly this combination. I am curious if everything fits.
Sent from my OnePlus 5T using XDA Labs
Paulikid said:
I will get my OP7T Pro in two weeks and I'm going to buy exactly this combination. I am curious if everything fits.
Sent from my OnePlus 5T using XDA Labs
Click to expand...
Click to collapse
It fits nicely like it is made for each other. it has maybe 1mm gap between the glass protector and case.