Related
SuperSU doesn't seem to be working the way it always has on my other devices in the past. After successfully flashing TWRP 2.8.7.0 [6.0] EN (by Sminki *xda* repack) on my Honor 7 with multi-tool and then installing SuperSU via TWRP and gaining root access, I rebooted my phone and immediately Google Play wanted me to update the SuperSU app. I updated the SuperSU app and also installed SuperSU Pro that I had purchased previously on another device. I then installed terminal emulator so I could confirm that I had root access by running the su command. However after running the terminal emulator and attempting to use the su command nothing happened. I didn't get an error that I would expect if root wasn't present such as su not found, it just seems to sit there waiting. It then occurred to me that I hadn't received the usual popup from SuperSU asking me whether I wanted to grant root permission.
From what I have been able to work out I do have root access but for whatever reason SuperSU is not displaying its message asking me to grant or deny access. I have managed to establish that I do have root by going into the SuperSU settings and setting the default access as grant rather than prompt after which terminal emulator is able to use the su command.
Does anyone know how I can get the prompt to work? I would rather have SuperSU prompt me when an app requests root access for security reasons since giving any app that requests root unfettered access probably isn't the best idea.
If your problem has anything to do with SSU Pro then I dont say nothing cause dont use it.
Anyway going the same procedure as you I had, after GPlay update, the problem when trying to open SSU with message "SSU binary cant be found" or sth like this. However my SSU has been working (at least it did look alike) giving prompts.
The solution was SSU cleanup, copying and installing SSU once again. If you check some threads here you will find some kinds of initial problems with SSU are quite common.
It looks like it is H7 speciality ;p. You need to flash B330 twice for 100% and you need to install SSU twice ;p
ps. Also "Draw over other apps" on but it was automatic - at least for me
adxuser said:
If your problem has anything to do with SSU Pro then I dont say nothing cause dont use it.
Anyway going the same procedure as you I had, after GPlay update, the problem when trying to open SSU with message "SSU binary cant be found" or sth like this. However my SSU has been working (at least it did look alike) giving prompts.
The solution was SSU cleanup, copying and installing SSU once again. If you check some threads here you will find some kinds of initial problems with SSU are quite common.
It looks like it is H7 speciality ;p. You need to flash B330 twice for 100% and you need to install SSU twice ;p
ps. Also "Draw over other apps" on but it was automatic - at least for me
Click to expand...
Click to collapse
Thanks. Seems to be working now. Also disabling doze altogether on marshmallow seems to have solved a lot of other issues I was having since the marshmallow update and subsequent custom recovery and root install.
Squall88uk said:
disabling doze altogether on marshmallow
Click to expand...
Click to collapse
By "Doze" you mean those switches to kill apps after screen lock or not?
adxuser said:
By "Doze" you mean those switches to kill apps after screen lock or not?
Click to expand...
Click to collapse
No I mean Marshmallows built in doze feature. I have the switches you're talking about set to let the app keep running for important apps like SuperSU anyway but they only affect EMUIs own power manager. Doze and EMUIs power manager seem to fight each other anyway and I don't like how doze stops my notifications coming through with some apps and interferes with other apps that I like to leave running all the time like AcDisplay.
I completely disabled doze altogether using "dumpsys deviceidle disable" in terminal emulator or using adb shell. The only problem is that it will be re-enabled after a reboot so I used the universal init.d app to run an init.d script on every boot to disable it again since the honor 7 kernel doesn't natively support init.d. I have all the apps that I had on lollipop (plus some more that I didn't have on lollipop, since I didn't have root when I used lollipop) set up exactly the way they were then and let EMUI handle the power management. I get about the same battery life that I had in lollipop which is fine for me since I charge it fully every night anyway.
I am just in process of developing opinion on that. For sure made one mistake prefering Google Clock over Huawei (and uninstalling the latter) but now even with adequate settings (for example it should have auto-start set by PM Plus add-on for Phone Manager) I am not so sure of my alarms ; ) I have been accustomed to Vanilla Android till now.
Ok. I had to do my lecture on MM Doze & App Standby functions. Also I am newbie on EMUI.
It looks like that many important things (background GPS runnings apps, notifications, alarms) can be double complicated on MM Huawei :/ (not to mention other EMUI problems e.g. with lock screen)
We have clean MM Android with its problems even for Nexus owners, then we have EMUI with its own background / notifications problems.
So 'Ignore optimisations' switch is by Google. You do not use it but maybe know which Google / Huawei apps should have optimizations off? (I have there Android System WebView - why? Google product should have it invisible, Fused Locations - the same, HiSuite ?, HwAps ?)
Anyway people report that it does not help for GPS tracking apps shutdown problems, but it is rather related to EMUI I think.
PS. 1. I do not think Huawei / Google power managers fight in any way. Huawei power manager stricly speaking these are drivers for hardware needed + basic user power handling setup.
What they did on higher level is this "keeps running after screen off" switch but I would not be so sure if this, set one or the other way (and Huawei soft in general), works properly with GCM messages and other wakeups. One should keep in mind that Huawei sells a lot without Google apps at all.
PS.1.b. Some apps need some changes to work properly with Doze. They are not allowed now to do what they like and when they like. And if they have to say sth they must use GCM message , if they have sth important to say they must use GCM high priority message. Android 5.1 API level 22 alarms do not fire now, there are 2 new methods from what I read. And Google could block spamming "high priority messages". So idea & direction is good I think. For not MM updated apps put them in Ignored.
PS2. In my opinion also you should not confuse B330 power handling issues with Doze.
It could be just Huawei optimizing things: taking away fast charging switch because it is on default now, making changes to power handling etc. or not making changes needed so now it could be the problem with Android. People claiming worse battery life for B330 claim mostly best on B320.
adxuser said:
For sure made one mistake prefering Google Clock over Huawei (and uninstalling the latter) but now even with adequate settings (for example it should have auto-start set by PM Plus add-on for Phone Manager) I am not so sure of my alarms ; ) I have been accustomed to Vanilla Android till now.
Click to expand...
Click to collapse
What's wrong with the Google clock? And what problems did you have after uninstalling the Huawei clock? I use the Google clock as my main clock app and have had no issues with it on either lollipop or marshmallow even after uninstalling the Huawei clock.
adxuser said:
Ok. I had to do my lecture on MM Doze & App Standby functions. Also I am newbie on EMUI.
It looks like that many important things (background GPS runnings apps, notifications, alarms) can be double complicated on MM Huawei :/ (not to mention other EMUI problems e.g. with lock screen)
We have clean MM Android with its problems even for Nexus owners, then we have EMUI with its own background / notifications problems.
Click to expand...
Click to collapse
Agreed. While EMUI does have some of its own features that can be useful a lot of things are twice as complicated as they need to be. I have generally found that just allowing all apps that have notifications you want to receive e.g. twitter set to be allowed to autostart and run in the background as much as they like seems to reduce issues with notifications (still not worked out if it completely stopped any issues), and even then if I want notifications to display correctly on the lockscreen, not only do I need to allow them for each particular app on the lockscreen through the notification manager I still have to use a lockscreen replacement which in my case is AcDisplay. To be honest I have every app set to run on autostart and in the background and I still haven't found that it has much impact on battery life and this seems to solves a lot of these kinds of issues for me. My previous phone (Samsung Galaxy A3) used touchwiz and never had any of these options so I've always assumed that touchwiz/android allowed apps to run when they wanted and access what they wanted within the scope of their permissions and everything always worked fine, admittedly battery life was an issue on that phone but it had a much smaller battery capacity than the Honor 7 and it still lasted me most of a day.
adxuser said:
So 'Ignore optimisations' switch is by Google. You do not use it but maybe know which Google / Huawei apps should have optimizations off? (I have there Android System WebView - why? Google product should have it invisible, Fused Locations - the same, HiSuite ?, HwAps ?)
Anyway people report that it does not help for GPS tracking apps shutdown problems, but it is rather related to EMUI I think.
Click to expand...
Click to collapse
I tried messing with the Ignore optimisations switch when I first upgraded to Marshmallow and it didn't seem to make any difference apps were still being afflicted with issues. I asked honor uk exactly what it did and whether it was for doze or not and they didn't know. I'm sure if I spoke Chinese and asked the Chinese customer service they would be able to tell me straight away but I never managed to find out. Even with doze disabled completely on my device I still have it set to ignore optimisations for all apps in case its something to do with EMUI.
adxuser said:
PS. 1. I do not think Huawei / Google power managers fight in any way. Huawei power manager stricly speaking these are drivers for hardware needed + basic user power handling setup.
What they did on higher level is this "keeps running after screen off" switch but I would not be so sure if this, set one or the other way (and Huawei soft in general), works properly with GCM messages and other wakeups. One should keep in mind that Huawei sells a lot without Google apps at all.
Click to expand...
Click to collapse
What I meant by fight is that the 2 have their own settings rather than these being integrated with each other. So for example when specify that I want an app to be able to run in the background while the screen is off in an ideal world this would also tell Google's doze that I do not want it to doze that app. otherwise I have to effectively set the same thing twice even though it may be called different things.
adxuser said:
PS.1.b. Some apps need some changes to work properly with Doze. They are not allowed now to do what they like and when they like. And if they have to say sth they must use GCM message , if they have sth important to say they must use GCM high priority message. Android 5.1 API level 22 alarms do not fire now, there are 2 new methods from what I read. And Google could block spamming "high priority messages". So idea & direction is good I think. For not MM updated apps put them in Ignored.
Click to expand...
Click to collapse
I like the idea of doze in general and I'm generally a fan of most things that google do with android. If i was running a nexus or an AOSP rom I would definitely leave doze activated and only disable its optimization for apps that either coded with doze in mind or apps which I personally consider to be high priority regardless of whether google agrees such as twitter. I lie to get twitter notification that I have enabled as soon as the tweet they link to is tweeted not at the intervals that doze allows apps to update at. But that's a personal thing rather than an issue with the idea. So for YouTube notifications for example I would be quite happy for doze to run the show.
adxuser said:
PS2. In my opinion also you should not confuse B330 power handling issues with Doze.
It could be just Huawei optimizing things: taking away fast charging switch because it is on default now, making changes to power handling etc. or not making changes needed so now it could be the problem with Android. People claiming worse battery life for B330 claim mostly best on B320.
Click to expand...
Click to collapse
My intention has never been to confuse EMUI's power handling with Doze. I have just been trying to simplify the issue for me. as I have already said I generally allow any apps to do what they want both in EMUI's settings and by disabling doze as its simpler that way for me. Battery has never been an issue for me with either lollipop (B180) or marshmallow (B330) for me personally but i'm sure for some people it can be.
Squall88uk said:
What's wrong with the Google clock? And what problems did you have after uninstalling the Huawei clock? I use the Google clock as my main clock app and have had no issues with it on either lollipop or marshmallow even after uninstalling the Huawei clock.
Click to expand...
Click to collapse
nothing wrong, in fact I've chosen it deliberately.
Basically prefer Google apps cause they can be updated and whats more new features are added from time to time, with let's say B330 stock you are left with B330 stock unless and if Huawei pushes sth new.
Just for some producers ROM's there are sometimes apps good enough and also interconnected on some levels with launcher / lock screen / power management that it is better to leave them & even make use of them.
Squall88uk said:
Even with doze disabled completely on my device I still have it set to ignore optimisations for all apps in case its something to do with EMUI.
Click to expand...
Click to collapse
Rather strange for me what you're doing.
Squall88uk said:
What I meant by fight is that the 2 have their own settings rather than these being integrated with each other. So for example when specify that I want an app to be able to run in the background while the screen is off in an ideal world this would also tell Google's doze that I do not want it to doze that app. otherwise I have to effectively set the same thing twice even though it may be called different things.
Click to expand...
Click to collapse
It cant be integrated, it is Google licensed system. Doze & App standby these are powerfull, long-term features.
This EMUI function is just easy switch to kill sth after screen off. Not sure of it
Also not sure of this auto-start PM Plus utility It is not only auto-start on system start but also start on events. Powerfull mess with many apps without granular controls.
However I use both ;p
edit. ok, it looks you're right about Doze. I.e. Huawei Doze problem. Here for Mate 8:
http://forum.xda-developers.com/showpost.php?p=64827731&postcount=15
Not solved as I see (but no time to read everything)
So Paul @paulobrien solution is with his ROM, your solution is to shut down Doze, I would prefer Doze properly working on (rooted) stock solution
adxuser said:
The solution was SSU cleanup, copying and installing SSU once again. If you check some threads here you will find some kinds of initial problems with SSU are quite common.
Click to expand...
Click to collapse
I have the same problem on my tablet Huawei MediaPad T1 8.0 Pro.
Please explain exactly what supposed to mean is "SSU cleanup, copying and installing SSU once again".
If one makes SSU cleanup then root access will flee for good and installing SSU again encounter the stark barrier, right?
If of course by "cleanup" you mean SuperSU's SETTINGS -> CLEANUP -> Reinstall (?)
@ioy
Do you have EMUI 4.0 on your tablet?
Some tips & tricks work between some Huawei models but for sure not each on everyone...
Anyway I made (in SSU) cleanup for full unroot (if I remember correctly :/) and by "copying & installing" I mean H7 procedure to copy and install via TWRP.
So full unroot and full root once again and in my case it solved my problem.
@adxuser, and what is EMUI 4.0 and how to check if it is on the tablet?
Where to learn about these tip & tricks?
I do not have TWRP because I wanted to have warranty still intact so not unlocked bootloader, and that's why I have unrooted with KingRooot and afterwards switched to SuperSU with SuperSume.
Please, respond...
How to use cleanup options in SuperSu, there're several ones intended for switching to another su application - all of them work the way they need TWRP or maybe it is possible to switchin the system (booted)?
@ioy
what is EMUI 4.0 and how to check if it is on the tablet?
Where to learn about these tip & tricks?
I do not have TWRP because I wanted to have warranty still intact so not unlocked bootloader, and that's why I have unrooted with KingRooot and afterwards switched to SuperSU with SuperSume.
Click to expand...
Click to collapse
Emotion^^ User Interfece - Huawei visual & control overlay over Android.
For your http://www.gsmarena.com/huawei_mediapad_t1_8_0-6705.php 4.3 not upgradeble Android it is probably 2.0? (settings > about).
Tips & tricks those are some common to EMUI solutions - working on many Huawei models. They are nowhere together to be found, you have to search in all Huawei models if you are looking for sth. special. Anyway as you probably understand from JellyBean EMUI no.x to MM EMUI no.4.0 (or 4.1) that is a long way (some common things could even work however).
And also I am not a root specialist but if you have a locked bootloader SSU will never work so make a full cleanup and do not try again
Maybe this KingRoot will work but search for info on that.
ps. in most "normal" countries unlocked bootloader hasn't got anything to warranty.
Yes, KingRoot worked normally, prompt popup windows worked neatly.
However, Huawei itself warns if you unlock the bootloader then they will not help you anymore in case of trouble. And as you maybe know already, Huawei official assistance is needed in doing unlocking bootloader, it is done through their site and first this terrible warning is displayed... (presumably they register phone's IMEI, serial number and these data is then spread to warranty service outposts worldwide)
Yes, they can track and they probably track a lot more easily
Regarding warranty it may and it vary from continent/country to continent/country but local (e.g. european) regulations take effect on that matter.
So Huawei China can even track what I did with the phone yesterday at 6pm but when I am able to relock the phone (even with status relocked) and it could be seen that it is malfunctioning because of hardware failure then I am talking to Huawei in Europe and I am totally not interested what Huawei China has to say.
So sometimes there are some commom myths and you should check (in a proper way ) what are the possibilities.
And you have cited wrong model, this one is Huawei MediaPad T1 PRO LTE:
http://www.gsmchoice.com/en/catalogue/huawei/mediapadt18.0lte/Huawei-MediaPad-T1-8.0-LTE.html
It has 4.4.4 Android version, and Emotion UI version 2.3, so what are these tips & tricks for this?
Please try to provide any clue, about those tips& tricks in respect of popup windows, as as I can see usual popups for any application are not present in this Huawei model... Apparently something must block them in a regular manner...
ioy said:
And you have cited wrong model, this one is Huawei MediaPad T1 PRO LTE:
http://www.gsmchoice.com/en/catalogue/huawei/mediapadt18.0lte/Huawei-MediaPad-T1-8.0-LTE.html
Click to expand...
Click to collapse
Quite possibly. Just a quick look.
As you probably understand we are on H7 subforum and I am not interested in other devices with its variants.
ioy said:
It has 4.4.4 Android version, and Emotion UI version 2.3, so what are these tips & tricks for this?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=66946525&postcount=12
Allright, how is it possible to switch off / disable this EMUI? What to freeze without bricking the phone? Presumably indeed this blocks popup windows itself and at all it seems providing no gain, plain Android is better and there are many apps on PlayStore with genius functions and full user's control, so please which system or internal memory apks are responsible for this EMUI and one normally can freeze them thus freeing the 'core' Android system from this dubious attraction?
First off, T-Mobile version H932 rooted with bootloader unlocked and TWRP installed.
I was a long time user of Cyanogenmod/Lineage on other platforms in the past and overall prefer AOSP based ROMS that are close to stock. So, I have tried PixelExperience, Lineage, and LiquidRemix on my V30. I like them all but overall I like LiquidRemix the best mostly due to some of the LiquidLounge options.
However, I have 3 things I miss. I could probably do without them but I think my overall usefulness of the phone is better when I have them.
1. WiFi Calling - I have poor coverage in my office until TMO deploys Band 12 or Band 71 in my area. Not on schedule for almost a year yet.
2. OK Google support. I have tried numerous things to get this working on all 3 of the custom roms but it simply does not. Sounds like a MIC volume issue currently in all AOSP based ROMS on the V30. I use Android Auto (with a headunit) and not having this is kind of a pain.
3. Google Pay NFC support. I installed Magisk on all 3 custom ROMS but never could get it to fully pass all the safetynet checks.
As for running Stock. I know it would fix 1&2 above, but if I kept the device rooted and bootloader unlocked I am not sure #3 would be fixed. However, I can deal with that. What I hate about LG Stock overall is the interface, all their crap, and especially their dialer. I previously was side loading APK version of Google Dialer but it is missing the SPAM features and such unless you can flash it. I also sideloaded a pixel launcher and GCAM. But the dialer thing was always a pain.
I am going to try the debloated/magisk 20p STOCK. Anyone using this and have suggestions on how to get it working with Google Pay, Google Dialer, etc?
Next phone, I will probably spend the money on a pixel
Havoc is pretty awesome
TheCoryGuy said:
Havoc is pretty awesome
Click to expand...
Click to collapse
Yes, I'm sure it is. The guys doing custom ROMs do great work. But... Does I'm sure none of the 3 things I listed work on it.
Some day we'll get Wi-Fi calling in a custom ROM. One would think this would be more a standard method built into Android itself
I've got a H931 (basically daily driver with us998 20g) and a ls998 that I've used to test various roms and am now experimenting with serious debloating us998 20g on it.
I'm also accustom to Lineage, but as you know, there are not official builds for all devices. While the available roms are good, they are still a bit away from supporting all the basics.
In the meantime (and possibly for longer), just got through debloating the ls998. Now only 27 apps installed. Everything I need is working, very well actually. Looking at debloating even further. Watching to see if there are any ill effects.
It's difficult to determine what is the best, most productive way to go. At this point for me though I think it's debloating a stock rom. Time consuming but I hope worth it.
Good luck with your choice, Cheers
So I am on de-bloated stock with a few mods (google dialer, gcam, pixel launcher. Only thing not working at all is Google Pay. Magisk hide not working to fool it. Not a big deal.
thebitjockey said:
So I am on de-bloated stock with a few mods (google dialer, gcam, pixel launcher. Only thing not working at all is Google Pay. Magisk hide not working to fool it. Not a big deal.
Click to expand...
Click to collapse
That's easily fixed. Go to set->apps->google.services and delete cache and data. Make sure to hide magisk and any apps u don't want to see it first, reboot. Worked for me.
Cheers
AsItLies said:
That's easily fixed. Go to set->apps->google.services and delete cache and data. Make sure to hide magisk and any apps u don't want to see it first, reboot. Worked for me.
Cheers
Click to expand...
Click to collapse
Can you be more specific? I did what I think you mentioned:
Setup Magisk-Hide to hide from GPay, Google Play Store, and Google.
Cleared data and cache for Google Play Services (I assume that's what you meant?)
Rebooted, checked GPay, and it still says I can't use it because my device is rooted/altered.
Running Magisk 18.1, manager 7.1.1. Safetynet passes (both green checkmarks). What am I missing?
schwinn8 said:
Can you be more specific? I did what I think you mentioned:
Setup Magisk-Hide to hide from GPay, Google Play Store, and Google.
Cleared data and cache for Google Play Services (I assume that's what you meant?)
Rebooted, checked GPay, and it still says I can't use it because my device is rooted/altered.
Running Magisk 18.1, manager 7.1.1. Safetynet passes (both green checkmarks). What am I missing?
Click to expand...
Click to collapse
You're not running any Xposed modules, are you?
ChazzMatt said:
You're not running any Xposed modules, are you?
Click to expand...
Click to collapse
Nope, no Xposed at all, never installed it. Only one Masgisk module (Google dialer). VS996 20i otherwise (installed via TWRP... so stock rooted overall).
I thought I read that we need Magisk Canary now, as 18.1 isn't enough by itself. Another tip was to manually Magisk-Hide Google Play Services? I didn't want to dig in that deeply, if others are able to get by without these tricks...
schwinn8 said:
Nope, no Xposed at all, never installed it. Only one Masgisk module (Google dialer). VS996 20i otherwise (installed via TWRP... so stock rooted overall).
I thought I read that we need Magisk Canary now, as both 18.1 isn't enough by itself. Another tip was to manually Magisk-Hide Google Play Services? I didn't want to dig in that deeply, if others are able to get by without these tricks...
Click to expand...
Click to collapse
I don't know. Mine was hiding from Google Pay very well on18.0 and then 18.1 -- until I decided I cared more how my status bar icons looked than Google Pay.
So had to go Xposed route even though I know that can't be invisible from Safety Net. I made the choice on purpose.
ChazzMatt said:
I don't know. Mine was hiding from Google Pay very well on 18.1 until I decided I cared more how my status bar icons looked than Google Pay.
So had to go Xposed even though I know that can't be invisible from Safety Net.
Click to expand...
Click to collapse
Stock rooted US998.
* Battery circle with percentage number inside, instead of TWO stock LG battery icons (wasted space and looks ugly). How complete the circle is also indicates percentage.
* Actual LTE symbol, not silly"4GLTE".
* H for HSPA, not "4G".
* Gradient distinction for both carrier and Wi-Fi strength.
Some are build prop edits, but I'm also running two Xposed modules.
Sent via open market LG US998 V30/V30+
schwinn8 said:
Can you be more specific? I did what I think you mentioned:
Setup Magisk-Hide to hide from GPay, Google Play Store, and Google.
Cleared data and cache for Google Play Services (I assume that's what you meant?)
Rebooted, checked GPay, and it still says I can't use it because my device is rooted/altered.
Running Magisk 18.1, manager 7.1.1. Safetynet passes (both green checkmarks). What am I missing?
Click to expand...
Click to collapse
Funny, in that I just tried my procedure on my 2nd device and it didn't work - but still working / worked on the H931...
My guess is that on one, Titanium bkup wasn't installed (installed after enable gpay), on the other, already installed?
will post back if I figure it out.
Try magisk hide props module
Bupreno said:
Try magisk hide props module
Click to expand...
Click to collapse
What is "props module"?
schwinn8 said:
Can you be more specific? I did what I think you mentioned:
Setup Magisk-Hide to hide from GPay, Google Play Store, and Google.
Cleared data and cache for Google Play Services (I assume that's what you meant?)
Rebooted, checked GPay, and it still says I can't use it because my device is rooted/altered.
Running Magisk 18.1, manager 7.1.1. Safetynet passes (both green checkmarks). What am I missing?
Click to expand...
Click to collapse
Go to Magisk forum. It has detail instructions how to pass Google pay.
You have to install old version of Google service frame work in order to make it.
It's working fine on my phone.
So when I have multiple apps open, like for example. Youtube, Notes and Firefox then every time I switch app, the apps left in the background refreshes and lose whatever progress I'm doing in them. It's like they have trouble running in the background. didn't have this problem back in LGV20 so this is odd. I made sure to exclude these apps in the battery optimization and it does not seem to help
noddledizzy said:
So when I have multiple apps open, like for example. Youtube, Notes and Firefox then every time I switch app, the apps left in the background refreshes and lose whatever progress I'm doing in them. It's like they have trouble running in the background. didn't have this problem back in LGV20 so this is odd. I made sure to exclude these apps in the battery optimization and it does not seem to help
Click to expand...
Click to collapse
Are you on stock firmware or custom ROM? What version of either?
Do you have some task killer app installed?
ChazzMatt said:
Are you on stock firmware or custom ROM? What version of either?
Do you have some task killer app installed?
Click to expand...
Click to collapse
I have tested this on both stock oreo(US998) and AOSP PIE rom(H918) and the problem persists on both.
No, I do not have any task killers of some sort.
noddledizzy said:
I have tested this on both stock oreo(US998) and AOSP PIE rom(H918) and the problem persists on both.
No, I do not have any task killers of some sort.
Click to expand...
Click to collapse
No cleaners, optimizers, etc?
I'm just asking because I had installed paid CC cleaner app upon a good review on technical website. But after running for a few days I noticed it was killing tasks in the background, like Waze when I would look at an incoming email. Waze was running just fine until it temporarily became a background task. Then it got killed, even though I was still using it!
Also my phone started running hot and had become sluggish in spite of the fact this app was supposed to be "optimizing" my phone. So I uninstalled it.
I'm just curious if there's some app you've have for a while that you forgotten about, that is doing something like that... That would also explain why you see it on stock as well as custom ROMs, because it would be an app you installed yourself.
Least likely is you have the nuclear setting in Developer Options to limit how many apps can run at one time. Most people don't even know about that.
Otherwise I have no other answers.
Thanks for the insight. But the thing is, 90% of apps I have in both my US998 and H918 are open-source from F-droid. None of them really messes up with my battery. The only proprietary apps I have are first party apps from Google like Youtube, Google maps and Play services and some stock LG apps. Yeah, I never touch the app background limit in the developer options. Anyway, I appreciate you trying to help me and you already helped me a lot before.
Has anyone here uses package disabler pro or adb to remove bloatware and/or system apps? If so which apps did you disable/remove? Did it affect performance and/or battery life at all?
I used the ADB method. That said, some of the software (mostly pre-installed games) can be uninstalled normally, which is nice.
For the rest, I used ADB commands in Fastboot to remove them.
I was working mostly blind, since I hadn't seen anyone with a list, but I think I wound up nuking somewhere between two and three dozen system apps.
Sadly, I didn't write out a list. I tried to err on the side of caution and not nuke anything that sounded important.
Crap like the Game of Thrones game, CNN app and other news apps, radio apps, LG versions of stuff I was using Google apps of (most LG software, actually).
I left things like LG Home and LG Dual Screen installed. Obviously didn't touch System UI or anything that seemed critical.
I also removed some AT&T garbage I don't want or need.
I just Googled up generic instructions and winged it after that.
I did all this on my first day with the phone (early April) so I really don't have any way to compare performance or battery life before and after.
But I haven't had a single performance issue with this phone in over a month of use, and battery has been absolutely beastly.
(I think you've seen a comprehensive post I made in another thread of yours that shows my software environment and how I replaced pretty much everything (launcher, navigation gesture, live wallpaper, etc.) with third-party software that I prefer).
Mejilan said:
I used the ADB method. That said, some of the software (mostly pre-installed games) can be uninstalled normally, which is nice.
For the rest, I used ADB commands in Fastboot to remove them.
I was working mostly blind, since I hadn't seen anyone with a list, but I think I wound up nuking somewhere between two and three dozen system apps.
Sadly, I didn't write out a list. I tried to err on the side of caution and not nuke anything that sounded important.
Crap like the Game of Thrones game, CNN app and other news apps, radio apps, LG versions of stuff I was using Google apps of (most LG software, actually).
I left things like LG Home and LG Dual Screen installed. Obviously didn't touch System UI or anything that seemed critical.
I also removed some AT&T garbage I don't want or need.
I just Googled up generic instructions and winged it after that.
Click to expand...
Click to collapse
What's the benefits to disabling all of this stuff? I've spent years debloating my devices and never actually noticed any benefit to it. It's a genuine question, as I'm deciding whether or not to do it myself as well
Mejilan said:
I used the ADB method. That said, some of the software (mostly pre-installed games) can be uninstalled normally, which is nice.
For the rest, I used ADB commands in Fastboot to remove them.
I was working mostly blind, since I hadn't seen anyone with a list, but I think I wound up nuking somewhere between two and three dozen system apps.
Sadly, I didn't write out a list. I tried to err on the side of caution and not nuke anything that sounded important.
Crap like the Game of Thrones game, CNN app and other news apps, radio apps, LG versions of stuff I was using Google apps of (most LG software, actually).
I left things like LG Home and LG Dual Screen installed. Obviously didn't touch System UI or anything that seemed critical.
I also removed some AT&T garbage I don't want or need.
I just Googled up generic instructions and winged it after that.
Click to expand...
Click to collapse
Do you have the commands? I need to dump chrome as it keeps re-enabling itself and I absolutely HATE chrome. Keeps giving itself permissions I've denied it as well. This has been happening several times a day for about 4 days now
Ryano89 said:
What's the benefits to disabling all of this stuff? I've spent years debloating my devices and never actually noticed any benefit to it. It's a genuine question, as I'm deciding whether or not to do it myself as well
Click to expand...
Click to collapse
For one, it just gets rid of apps and icons for crap I never wanted to begin with. I know that most third-party launchers have options to hide apps, but I wanted a solution that was a tad more permanent (though without root, this isn't a 100% wiping of these apps. It's just the best we can manage without root). Since I tend to use Google's main suite of apps for most things, and replace things like my launcher, navigation gestures, and other critical parts of the software environment with third-party solutions, I don't really want a lot of overlapping apps that I'm never going to use. So nuking things like OEM or Carrier versions of Google apps is usually one of my first priorities. Also bull**** like Device Wellness apps, Carrier promotional apps and games, duplicate contacts, gallery, keyboard, dialer, email, contacts, calendar, messaging and browser apps. All that stuff goes. I have no use for two or three different versions of all these apps on my device. I love Chrome, Google Photos, the Google Dialer, Google Contacts, Google Calendar, Google's RCS-enabled Messaging app, etc.
So for me, it's to de-clutter and to make sure I don't have duplicate functionality potentially running in the background eating up system resources, RAM, or mobile data. As long as you don't accidentally nuke something critical to the system, there's no real harm in de-bloating, even if on modern flaghsips with beastly hardware and tons of RAM, there's little performance or battery life to be gained by doing so. If nothing else, I try to keep the number of installed apps in the low 100s, and this helps on that count.
pre4speed said:
Do you have the commands? I need to dump chrome as it keeps re-enabling itself and I absolutely HATE chrome. Keeps giving itself permissions I've denied it as well. This has been happening several times a day for about 4 days now
Click to expand...
Click to collapse
I used the following guide:
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/amp/
I believe I had the LG Mobile Drivers and Minimalist ADB & Fastboot already installed from my V30 days, so I skipped the first few steps, IIRC.
Or maybe I downloaded new versions and installed those. I don't remember anymore.
Mejilan said:
For one, it just gets rid of apps and icons for crap I never wanted to begin with. I know that most third-party launchers have options to hide apps, but I wanted a solution that was a tad more permanent (though without root, this isn't a 100% wiping of these apps. It's just the best we can manage without root). Since I tend to use Google's main suite of apps for most things, and replace things like my launcher, navigation gestures, and other critical parts of the software environment with third-party solutions, I don't really want a lot of overlapping apps that I'm never going to use. So nuking things like OEM or Carrier versions of Google apps is usually one of my first priorities. Also bull**** like Device Wellness apps, Carrier promotional apps and games, duplicate contacts, gallery, keyboard, dialer, email, contacts, calendar, messaging and browser apps. All that stuff goes. I have no use for two or three different versions of all these apps on my device. I love Chrome, Google Photos, the Google Dialer, Google Contacts, Google Calendar, Google's RCS-enabled Messaging app, etc.
So for me, it's to de-clutter and to make sure I don't have duplicate functionality potentially running in the background eating up system resources, RAM, or mobile data. As long as you don't accidentally nuke something critical to the system, there's no real harm in de-bloating, even if on modern flaghsips with beastly hardware and tons of RAM, there's little performance or battery life to be gained by doing so. If nothing else, I try to keep the number of installed apps in the low 100s, and this helps on that count.
I used the following guide:
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/amp/
I believe I had the LG Mobile Drivers and Minimalist ADB & Fastboot already installed from my V30 days, so I skipped the first few steps, IIRC.
Or maybe I downloaded new versions and installed those. I don't remember anymore.
Click to expand...
Click to collapse
Back in my V20 days there was an app on the store for this. I'm assuming that's no longer the case? I have been using a rooted OnePlus for a couple of years so I'm out of the loop on this ?
Ryano89 said:
Back in my V20 days there was an app on the store for this. I'm assuming that's no longer the case? I have been using a rooted OnePlus for a couple of years so I'm out of the loop on this
Click to expand...
Click to collapse
LG Package Disabler, or some such? I think it's still around.
I've heard of it, though I've never actually used it.
Nor do I know if it's been updated to support the V60.
Edit - I think this is it. And there's one review that suggests that it works on the V60.
https://play.google.com/store/apps/details?id=com.pdmdm.dmplay
Mejilan said:
LG Package Disabler, or some such? I think it's still around.
I've heard of it, though I've never actually used it.
Nor do I know if it's been updated to support the V60.
Edit - I think this is it. And there's one review that suggests that it works on the V60.
https://play.google.com/store/apps/details?id=com.pdmdm.dmplay
Click to expand...
Click to collapse
It does.. curiously look at the apps it shows disabled when I downloaded it. I disabled Android Auto and YouTube... But what the hell are this other apps? I didn't touch them
Ryano89 said:
It does.. curiously look at the apps it shows disabled when I downloaded it. I disabled Android Auto and YouTube... But what the hell are this other apps? I didn't touch them
Click to expand...
Click to collapse
I think some of those, like the Android Device Wizard and LG Device Wizard are basically one-time apps that run whenever a phone is factory reset.
Basically, the new phone set-up screens and activations you went through when you first powered your device on after purchasing and receiving it.
They may be automatically flagged to disable themselves after that first-time run so that they don't continue to run anytime you reboot the device.
Honestly, that's just a guess, because I don't know.
I don't know about the rest of them, but you can probably Google them.
Mejilan said:
I think some of those, like the Android Device Wizard and LG Device Wizard are basically one-time apps that run whenever a phone is factory reset.
Basically, the new phone set-up screens and activations you went through when you first powered your device on after purchasing and receiving it.
They may be automatically flagged to disable themselves after that first-time run so that they don't continue to run anytime you reboot the device.
Honestly, that's just a guess, because I don't know.
I don't know about the rest of them, but you can probably Google them.
Click to expand...
Click to collapse
I tried, there was no real useful information. I was just curious anyway
Ryano89 said:
I tried, there was no real useful information. I was just curious anyway
Click to expand...
Click to collapse
I did some quick research:
com.lge.gdec.client seems to be related to the LG G-DEC portal.
https://gdec.lge.com/memLogin.do?req_lang=en
I don't have a log-in, nor do I know how to procure one, but I highly suspect that this is NOT a consumer-level feature or portal.
Perhaps it's for LG developers or existing LG employees. But if it's not consumer-level, then it's not surprising that the service is disabled by default.
LG GCUV (com.lge.gcuv) seems to be related to yet another LG sign-in portal called, appropriately enough, GCUV.
http://india.gcuv.lge.com/
This one seems to be specific to LG users (or developers or sales reps) in India, and it makes sense that it would be disabled on devices not intended for Indian markets.
Like G-DEC, I don't have a log-in for this, nor the means to procure one. I suspect this is another service that is not intended for everyday consumers.
I cannot find any information on Enabler Customizer (com.lge.smartenabler). Just questions about what it is here on XDA and on Reddit, with no one apparently knowing the answer.
So you might be asking yourself why system apps for services and log-ins not intended for consumers (or intended only for specific regions/markets) are doing on our phones?
The simple answer, most likely, is that they probably want to maintain and update as few system images as possible and thus, try to make them as homogenous as possible, disabling things not intended for this market or that market, as needed. Considering how slow LG typically are in releasing new updates for even their newest phones (let alone their older ones that have not yet technically seen support hit end-of-life), I'm OK with them trying to keep down the number of system images they need to work on. Especially if they pre-disable stuff not relevant to us without us needing to do it ourselves.
Mejilan said:
I did some quick research:
com.lge.gdec.client seems to be related to the LG G-DEC portal.
https://gdec.lge.com/memLogin.do?req_lang=en
I don't have a log-in, nor do I know how to procure one, but I highly suspect that this is NOT a consumer-level feature or portal.
Perhaps it's for LG developers or existing LG employees. But if it's not consumer-level, then it's not surprising that the service is disabled by default.
LG GCUV (com.lge.gcuv) seems to be related to yet another LG sign-in portal called, appropriately enough GCUV.
http://india.gcuv.lge.com/
This one seems to be specific to LG users (or developers or sales reps) in India, and it makes sense that it would be disabled on devices not intended for Indian markets.
Like G-DEC, I don't have a log-in for this, nor the means to procure one. I suspect this is another service that is not intended for everyday consumers.
I cannot find any information on Enabler Customizer (com.lge.smartenabler). Just questions about what it is here on XDA and on Reddit, with no one apparently knowing the answer.
So you might be asking yourself why system apps for services and log-ins not intended for consumers (or intended only for specific regions/markets) are doing on our phones?
The simple answer, most likely, is that they probably want to maintain and update as few system images as possible and thus, try to make them as homogenous as possible, disabling things not intended for this market or that market, as needed. Considering how slow LG typically are in releasing new updates for even their newest phones (let alone their older ones that have not yet technically seen support hit end-of-life), I'm OK with them trying to keep down the number of system images they need to work on. Especially if they pre-disable stuff not relevant to us without us needing to do it ourselves.
Click to expand...
Click to collapse
Yeah I found those links but didn't really know what I was reading. I completely understand why they would be on all devices for ease of update and production. I just didn't know what they were
Ryano89 said:
Yeah I found those links but didn't really know what I was reading. I completely understand why they would be on all devices for ease of update and production. I just didn't know what they were
Click to expand...
Click to collapse
Now I kind of want to know what they are as well.
If I had to take a guess, I'd say that they're intended for either LG developers, sales reps, or repair technicians, and that these disabled services facilitate the servicing of devices when needed.
Mejilan said:
LG Package Disabler, or some such? I think it's still around.
I've heard of it, though I've never actually used it.
Nor do I know if it's been updated to support the V60.
Edit - I think this is it. And there's one review that suggests that it works on the V60.
https://play.google.com/store/apps/details?id=com.pdmdm.dmplay
Click to expand...
Click to collapse
That app basically does the same as disabling the apps. It won't stop Chrome from re-enabling every day. I'll try your adb commands next. So tired of that crap app doing this
pre4speed said:
That app basically does the same as disabling the apps. It won't stop Chrome from re-enabling every day. I'll try your adb commands next. So tired of that crap app doing this
Click to expand...
Click to collapse
I imagine the ADB commands will work. I don't plan on disabling Chrome, because I use it every day.
But when you zap a package using Fastboot, the app will still actually show up in your Apps listing under Settings, but it'll have a "not installed" next to it.
If you do a factory reset, they'll all revert and you'd need to use the Fastboot ADB commands to nuke them again.
So they're kind of half-gone.
It's not quite as comprehensive as using root to completely delete them from the system partition.
But it's the best we've got outside of root.
I can confirm this package disabler works to disable any app on the V60 which is literally the only thing I typically do when rooting now that I have adguard and youtube vanced... so I dont need root access anymore thanks to that package disabler app. The phone is also fast enough for me to not need access to any type of speed tweaking of the cpu or anything. This is the first phone I can use without root thanks to that dev.
I have significantly improved my charging speed issues and battery drain issues seem to finally drain at a normal rate rather than unexplainably quick. Everything I use still works, im experienced at minimal services tho from every device ive ever owned, pc and phone. Yes it does make a significant difference to not be running so many unnecessary processes.
lendawg said:
Has anyone here uses package disabler pro or adb to remove bloatware and/or system apps? If so which apps did you disable/remove? Did it affect performance and/or battery life at all?
Click to expand...
Click to collapse
cqqx2 said:
I can confirm this package disabler works to disable any app on the V60 which is literally the only thing I typically do when rooting now that I have adguard and youtube vanced... so I dont need root access anymore thanks to that package disabler app. The phone is also fast enough for me to not need access to any type of speed tweaking of the cpu or anything. This is the first phone I can use without root thanks to that dev.
I have significantly improved my charging speed issues and battery drain issues seem to finally drain at a normal rate rather than unexplainably quick. Everything I use still works, im experienced at minimal services tho from every device ive ever owned, pc and phone. Yes it does make a significant difference to not be running so many unnecessary processes.
Click to expand...
Click to collapse
Do you have a list of what you disabled?
I have the tmobile varient... This is the xml contents of the things I disabled for a stock experience. Note: I dont use google voice assistant or any pen input, nfc, or always on display... I also use youtube vanced for youtube and poweramp for music. Those are notable things I disabled imo, everything else is just added bloat to stock Android 10. Dont disable any LG Home apps as they power the navigation and also dual screens, this is safe you wont get any device bricking errors, you can always go back and toggle things on and off to your liking but this is the xml export of apps I disabled. You could copy and paste this and save as xml to import into the service disabler.
Code:
<h>
<a class="java.util.ArrayList">
<string>com.android.LGSetupWizard</string>
<string>com.google.android.youtube</string>
<string>com.lge.sizechangable.weather.platform</string>
<string>com.android.dynsystem</string>
<string>com.google.android.googlequicksearchbox</string>
<string>com.lge.lgbroadcastradioservice</string>
<string>com.lge.wfcprovider</string>
<string>com.google.android.onetimeinitializer</string>
<string>com.lge.appbox.client</string>
<string>com.lge.quicktools</string>
<string>com.lge.mirrorlink</string>
<string>com.tmobile.m1</string>
<string>com.qualcomm.uimremoteclient</string>
<string>com.lge.sui.widget</string>
<string>com.qualcomm.qti.qms.service.connectionsecurity</string>
<string>com.lge.wfcconnectivity</string>
<string>com.quicinc.voice.activation</string>
<string>com.qualcomm.qti.telephonyservice</string>
<string>com.lge.gnsstest</string>
<string>com.tmobile.pr.mytmobile</string>
<string>com.lge.lifetracker</string>
<string>com.lge.smartshare.provider</string>
<string>com.qualcomm.uimremoteserver</string>
<string>com.google.ar.core</string>
<string>com.google.ar.lens</string>
<string>com.lge.myplace.engine</string>
<string>com.lge.pickme</string>
<string>com.ipsec.service</string>
<string>com.lge.diag.echolocate</string>
<string>com.android.carrierconfig</string>
<string>com.google.android.marvin.talkback</string>
<string>com.lge.launcher2.theme.optimus</string>
<string>com.google.android.apps.work.oobconfig</string>
<string>com.android.hotwordenrollment.xgoogle</string>
<string>com.lge.smartshare</string>
<string>com.lge.icecontacts</string>
<string>com.android.egg</string>
<string>com.android.nfc</string>
<string>com.android.backupconfirm</string>
<string>com.lge.iftttmanager</string>
<string>com.lge.exchange</string>
<string>com.lge.wapservice</string>
<string>com.google.android.gm</string>
<string>com.google.android.apps.tachyon</string>
<string>com.lge.nfwlocationattribution</string>
<string>com.lge.gnsslogsetting</string>
<string>com.lge.ia.task.smartsetting</string>
<string>com.lge.lgmapui</string>
<string>com.lge.lgworld</string>
<string>com.google.android.setupwizard</string>
<string>com.lge.gamelauncher</string>
<string>com.qualcomm.qcrilmsgtunnel</string>
<string>com.facebook.services</string>
<string>com.android.printspooler</string>
<string>com.android.hotwordenrollment.okgoogle</string>
<string>com.android.dreams.basic</string>
<string>com.lge.gnsspostest</string>
<string>com.google.android.apps.wellbeing</string>
<string>com.tmobile.pr.adapt</string>
<string>com.lge.abba</string>
<string>com.lge.cmas</string>
<string>com.lge.eula</string>
<string>com.lge.gcuv</string>
<string>com.lge.laot</string>
<string>com.lge.lms2</string>
<string>com.lge.jansky.service</string>
<string>com.lge.sizechangable.weather.theme.optimus</string>
<string>com.lge.entitlementcheckservice</string>
<string>com.lge.gestureanswering</string>
<string>com.google.android.syncadapters.contacts</string>
<string>com.android.chrome</string>
<string>com.google.android.tag</string>
<string>com.lge.gnss.airtest</string>
<string>com.lge.signboard.settings</string>
<string>com.google.android.apps.walletnfcrel</string>
<string>com.lge.wifi.p2p</string>
<string>com.android.calllogbackup</string>
<string>com.google.android.partnersetup</string>
<string>com.lge.gallery.aodimagewidget</string>
<string>com.android.carrierdefaultapp</string>
<string>com.lge.gdec.client</string>
<string>com.qualcomm.qti.remoteSimlockAuth</string>
<string>com.lge.wfcsettings</string>
<string>com.google.android.feedback</string>
<string>com.google.android.printservice.recommendation</string>
<string>com.android.managedprovisioning</string>
<string>com.lge.smartsharepush</string>
<string>com.lge.lgcontentsetting</string>
<string>com.lge.themeservice</string>
<string>com.tmobile.rsuadapter.qualcomm</string>
<string>com.ipsec.vpnclient</string>
<string>com.android.providers.partnerbookmarks</string>
<string>com.lge.qhelp.application</string>
<string>com.android.wallpaper.livepicker</string>
<string>com.facebook.system</string>
<string>com.ipsec.profile</string>
<string>com.lge.myplace</string>
<string>com.lge.hotspotprovision</string>
<string>com.lge.provider.signboard</string>
<string>com.lge.lgfota.permission</string>
<string>com.lge.lgaccount</string>
<string>com.lge.sizechangable.weather</string>
<string>com.google.android.projection.gearhead</string>
<string>com.lge.lgwallet</string>
<string>com.lge.eulaprovider</string>
<string>com.lge.bnr</string>
<string>com.lge.phonemanagement</string>
<string>com.qualcomm.qti.services.secureui</string>
<string>com.lge.smartdoctor.webview</string>
<string>com.lge.smartenabler</string>
<string>com.lge.cic.eden.service</string>
<string>com.google.android.gms.location.history</string>
<string>com.facebook.appmanager</string>
<string>com.lge.leccp</string>
<string>com.lge.music</string>
<string>com.lge.qhelp</string>
<string>com.android.traceur</string>
<string>com.qualcomm.qti.qms.service.trustzoneaccess</string>
<string>com.tmobile.rsuapp</string>
<string>com.tmobile.rsusrv</string>
<string>com.lge.gametuner</string>
<string>com.lge.signboard</string>
<string>com.lge.animal.resource</string>
<string>com.lge.snappage</string>
<string>com.lge.livemessage</string>
<string>com.lge.penprime</string>
<string>com.lge.wfcservice</string>
<string>com.google.android.inputmethod.latin</string>
<string>com.lge.sdencryption</string>
<string>com.lge.qmemoplus</string>
</a>
</h>
Again, all core phone features definately work like internet, messaging, phone calls, fingerprint, location, cameras, all of it as normal. There are a couple debatable apps like
com.lge.ia.task.smartsetting where I debate their impact on LGs battery management because I do believe it is possible for them to have added a particular app that improved on android 10s battery but for me im good with running with just things I know come with stock + dont break the system ui or dual screen functionality.
I just feel like companies with 1000s of employees force develop apps just to say they did something each week (+brag about in ads), and to act as if Google hasnt done a good enough job... usually companys have a couple solid apps but mostly bulky junk they think just because a phones specs are able to run a lot of things at once, its okay to toss in all kinds of extra code for the phone to have to deal with.
lendawg said:
Do you have a list of what you disabled?
Click to expand...
Click to collapse
cqqx2 said:
I have the tmobile varient... This is the xml contents of the things I disabled for a stock experience. Note: I dont use google voice assistant or any pen input, nfc, or always on display... I also use youtube vanced for youtube and poweramp for music. Those are notable things I disabled imo, everything else is just added bloat to stock Android 10. Dont disable any LG Home apps as they power the navigation and also dual screens, this is safe you wont get any device bricking errors, you can always go back and toggle things on and off to your liking but this is the xml export of apps I disabled. You could copy and paste this and save as xml to import into the service disabler.
Again, all core phone features definately work like internet, messaging, phone calls, fingerprint, location, cameras, all of it as normal. There are a couple debatable apps like
com.lge.ia.task.smartsetting where I debate their impact on LGs battery management because I do believe it is possible for them to have added a particular app that improved on android 10s battery but for me im good with running with just things I know come with stock + dont break the system ui or dual screen functionality.
I just feel like companies with 1000s of employees force develop apps just to say they did something each week (+brag about in ads), and to act as if Google hasnt done a good enough job... usually companys have a couple solid apps but mostly bulky junk they think just because a phones specs are able to run a lot of things at once, its okay to toss in all kinds of extra code for the phone to have to deal with.
Click to expand...
Click to collapse
Awesome thanks man!
No problem, I will update this later on this week. Whats funny is that was my stable backup but not my very latest tweaking, when I went to export my very latest list, the app has a button to enable all disabled apps and I accidentally pressed it, so I lost those settings but am working on making sure the very best options are enabled and disabled. I will be testing and tweaking to update this base list this werk to find the cleanest, performance and battery life... (by trying out before and after of certain debatable services)
If you use this list and find a feature is disabled you use and you dont know which app it was let me know (ex google assistant) I will let you know which apps you need to reenable.
Off the top of my head, device health services and qualcomms devicestatisticservice (id suggest disabling this one) and lgs smartcare are some apps that are debatable on whether or not they are best to enable or disable..
I play a lot of fortnite (I know I know) but its literally the most battery draining thing you can do especially when combined with a bluetooth controller at full brightness, so battery performance is easy for me to monitor.. Also I was having an absolute misreable time with this device before I came here and saw that nonroot package disabler program was a thing.
lendawg said:
Awesome thanks man!
Click to expand...
Click to collapse
Is anyone aware of a method of doing only spoofing and nothing else for this phone?
There are a few mods available for spoofing. They seem to assume that you're using a non-pixel device though, as they also "Pixelify" the phone with many additional pixel goodies that Pixel phones already have. I'm concerned that it might cause issues as it seems unhealthy to double up on features.
I've used pixelify, so far no issues and works with full size photos, the only kinda annoying thing is you need to turn it off every time you want to use magic eraser otherwise it doesn't show up as an option, as well if the app updates while the module is on you lose the eraser completely until deleting the data storage of the app and updating again without the module on, easy fix tho is just turn off auto update for google photos and update with the module off
GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
Magisk module to enables pixel exclusive features and ui - GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
github.com
Google unlimited backup is not working for me after root; the Google Photo app says it's not taking space, but the 'storage used' on the webpage actually increases. I tried using zygisk / shamiko / pixelify /lsposed module and those doesn't seem to work..
trojblue said:
Google unlimited backup is not working for me after root; the Google Photo app says it's not taking space, but the 'storage used' on the webpage actually increases. I tried using zygisk / shamiko / pixelify /lsposed module and those doesn't seem to work..
Click to expand...
Click to collapse
I've checked out those other solutions that I mentioned in the OP and it seems like Google has started using a protection method that constantly checks the validity of certain services and dynamically re-enforces them to function as originally intended. So even if you get a mod like Pixelify to work it will stop working within hours.
The devs behind these mods are aware of this protection and have yet to figure out a way to crack it. For now we can't cheat Google Photos.
RobbyRobbb said:
I've checked out those other solutions that I mentioned in the OP and it seems like Google has started using a protection method that constantly checks the validity of certain services and dynamically re-enforces them to function as originally intended. So even if you get a mod like Pixelify to work it will stop working within hours.
The devs behind these mods are aware of this protection and have yet to figure out a way to crack it. For now we can't cheat Google Photos.
Click to expand...
Click to collapse
I got it working yesterday on an old android 8 phone (htc10).
I factory reset, did not login Google account, applied zygisk/universal safetynet fix/pixel features, test that safetynet passes, then did the Google login. Google photos is saying that I can upload unlimited photos at 'storage saver' quality, but when I choose original quality it doesn't take up any space.
So yeah, it might have something to do with the newer protection methods, but for now I'm fine with copying photos to my old phone just for the backup.
trojblue said:
I got it working yesterday on an old android 8 phone (htc10).
I factory reset, did not login Google account, applied zygisk/universal safetynet fix/pixel features, test that safetynet passes, then did the Google login. Google photos is saying that I can upload unlimited photos at 'storage saver' quality, but when I choose original quality it doesn't take up any space.
So yeah, it might have something to do with the newer protection methods, but for now I'm fine with copying photos to my old phone just for the backup.
Click to expand...
Click to collapse
Can you try restarting the phone and see if it still works when uploading a larger video? I also thought that it worked on some other phones until i restarted and the settings for the Google Play service resets in Zygisk, breaking the hack. Photos still said that uploads are unlimited, but they still actually took up space in the could.
RobbyRobbb said:
Can you try restarting the phone and see if it still works when uploading a larger video? I also thought that it worked on some other phones until i restarted and the settings for Google Play service resets in Zygisk, breaking the back. Photos still said that uploads are unlimited, but they still actually took up space in the coul
Click to expand...
Click to collapse
That kind of scares me from restarting xd
I've uploaded ~50G of photo/videos with no problems, but haven't restarted for once yet. I'll try out restarting once I got all my old photos uploaded.
RobbyRobbb said:
I've checked out those other solutions that I mentioned in the OP and it seems like Google has started using a protection method that constantly checks the validity of certain services and dynamically re-enforces them to function as originally intended. So even if you get a mod like Pixelify to work it will stop working within hours.
The devs behind these mods are aware of this protection and have yet to figure out a way to crack it. For now we can't cheat Google Photos.
Click to expand...
Click to collapse
Well of course why wouldn't they figure it out when people post and create so many videos of this spoof/exploit. Dont you think they would investigate then patch the issue lol wow
The OG Pixel gets unlimited original quality storage forever, so any device with the OG Pixel fingerprint would presumably be able to back up photos in Original Quality without counting towards storage.
The Pixel 2 through 5a all get unlimited Storage Saver (1080p) forever.
If I flash the pixelify module,will it work? or will all the other "pixel features" get in the way of my stock android 12?
squidbutt said:
If I flash the pixelify module,will it work? or will all the other "pixel features" get in the way of my stock android 12?
Click to expand...
Click to collapse
You can use pixelify but unselect all features except unlimited google photos