Hi,
I've just purchased a Pad 6 Pro Tablet with the following claimed spec: Android 11 Inch 120Hz WQHD+ Snapdragon 870 + 10000mAh
I've installed both DevCheck and Aida64 to double check I wasn't scammed (AliExpress seller...)
They both show absolutely different specifications:
How can this be, and which one is right???!
DevCheck:
CPU: Mediatek MT6750 - MT6750V/C (and NOT snapdragon 870)
Android: 8.1.0 Oreo and NOT 11
GPU: ARM Mali-T860
Aida64:
CPU: Snapdragon 870
Android: 11
GPU: ARM Mali-T860
Maybe a fake one then. Check the files in the root - dev - proc if there is qcom or mtk texts in their names.
If it's MTK, you might be able to root it with Amazing temp root, mtk-su.
Bought a faked one years ago. Back then the faking data of these MTK devices was on the proinfo partition. Don't remember much but there was some Russian youtube video about.
check baseband. yet another app.
https://play.google.com/store/apps/details?id=ru.andr7e.deviceinfohw
krispil said:
Hi,
I've just purchased a Pad 6 Pro Tablet with the following claimed spec: Android 11 Inch 120Hz WQHD+ Snapdragon 870 + 10000mAh
I've installed both DevCheck and Aida64 to double check I wasn't scammed (AliExpress seller...)
They both show absolutely different specifications:
How can this be, and which one is right???!
DevCheck:
CPU: Mediatek MT6750 - MT6750V/C (and NOT snapdragon 870)
Android: 8.1.0 Oreo and NOT 11
GPU: ARM Mali-T860
Aida64:
CPU: Snapdragon 870
Android: 11
GPU: ARM Mali-T860
Click to expand...
Click to collapse
Its obvious fake. Snapdragon 870 ships with adreno 650 GPU. Mediatek MT6750 ships with mali graphics
Related
Hello guys,
I woult like to know how can I update to Lollipop this Tablet with Phone function?
Which firmware I must use?
>ABOUT DEVICE<
BRAND: PHILCO
MODEL: WORKTAB Q10
ANDROID: 4.2.2
KERNEL: 3.5.0-rc6 ([email protected] #281 - CST 2013 ASV[2->2])
VERSION: full-smdk4412-eng 4.2.2 JDQ39 eng.utsw1.20131030.162012
>BRAND SITE SPECS<
CPU: ARM A9 Quad-Core de 1.6 GHz
Flash Memory: 16Gb
RAM Memory: 2Gb
Screen: 10.1" capacitive
Wi-Fi: 802.11 b/g/n
3G: 850/900/1900/2100 MHz
GSM: 850/900/1800/1900 MHz
GPS: A-GPS
Bluetooth 3.0
SD Slot supports up to 32gb
Android 4.2.2 Jelly Bean
>Info by app (CPU / RAM / DEVICE Identifier)<
CPU Type:
Samsung Exynos 4412 x4 1.6GHz
Smartphone Type:
S.LSI Division, Samsung Electronics Co., Ltd. WORKTAB Q10 (SMDK4412)
Samsung-CPU based Hyundai device
More Info:
1.3Ghz in single core mode, 1.2Ghz on x4 mode
Supported frequency states: 4
NEON capable (fast videos playback)
RAM memory module: 2 Gb DDR (Usable: 1908Mb)
GPU Type:
Mali-400 MP (quad core GPU)
by ARM Holdings plc / ARM Norway
up
Somebody?
Hello All,
I am looking at building my own rom for my tablet after playing with it for a while it seems sluggish even with the quadcore CPU, would anyone be able to point me in the right direction?
I would like to know where to start I am willing to learn the rest on my own.
Here are the specs of the device:
Processor:
Processor Chipset: Rockchip RK3126
Processor: Quadcore Cortex A7 1.3 GHz
Instruction Sets: armeabi-v7a, armeabi
GPU:
GPU: ARM Mali-400MP
OpenGL Version: OpenGL ES 2.0
Audio Chip:
Audio Chipset: Rk30sdk
RAM:
RAM: 512 MB
The sensor information on the device states Android Open Source Project or AOSP on each one which suggests that a custom rom is all ready on the device, would someone be able to point me in the correct direction for the firmware binaries so that I could build a generic rom for the device?
Here is more information on the device itself from the manufacturer http://www.time2direct.com/android-...944b-9-quadcore-android-kitkat-tablet-pc.html
I've emailed them but I haven't had a response from them.
I have found these two links which I believe to be correct for the device
http://malideveloper.arm.com/resources/drivers/open-source-mali-gpus-linux-kernel-device-drivers/
http://www.arm.com/products/processors/cortex-a/cortex-a7.php
Afternoon all,
I have a Cubot X17 (MT6735) Device, now I'm seeing a lack of ROMs for this phone or information on regarding porting.
One thing I have noted with some of the guides I have found, is they require the MT device to have the same chip and GPU, I have managed to acquire the following information of my phone as speaking to the manufacture when they are releasing Marsh Mallow is like talking to a brick wall.
My CPU
Code:
SoC Model: MediaTek MT6735
Core Architecture: 4x ARM Cortex-A53 @ 1300 MHz
Manufacturing Process: 28 nm
Instruction Set: 64-bit ARMv8-A
CPU Revision: r0p3
CPU Cores: 4
CPU Clock Range: 299 - 1300 MHz
Core 1 Clock: 1300 MHz
Core 2 Clock: 1300 MHz
Core 3 Clock: 1300 MHz
Core 4 Clock: (sleeping)
CPU Utilization: 17 %
Scaling Governor: interactive
Supported ABIs: arm64-v8a, armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
Supported 64-bit ABIs: arm64-v8a
AES: Supported
NEON: Supported
SHA1: Supported
SHA2: Supported
My GPU
Code:
<< OpenCL Device - Mali-T720 >>
Device Name: Mali-T720
Device Type: GPU
Device Vendor: ARM
Device Vendor ID: 0x07201000
Device Version: OpenCL 1.1
Device Profile: Full
Driver Version: 1.1
OpenCL C Version: OpenCL C 1.1
Clock Rate: 5 MHz
Compute Units: 2
Anyone shed some light as to if I can port or not. and if not alternative methods?
Try to read around XDA (search)... Found a thread explaining porting of MTK roms..
Found anything yet?
hey mate. I have a Smart Grand sp which is exactly like yours, only the brand name and the model name are different. have you found anything yet? does the ROM need to get ported? can we just flash a ROM from some phone which has exactly the same hardware? (i.e: your phones ROM on my phone?)
Sorry for the amateurish and stupid question if it is, cuz I don't have enough info in this regard.
hope to hear your answer and thank you in advance
Hello,
I have a Xoro 9718DR tablet:
CPU: Rockchip RK3066 ARM Cortex A9 Dual-Core-SoC
GPU: ARM Mali 400
Display: 9.7'' 4:3, 2048 x 1536 pixel
Is there any possibility to get something newer than Android version 4 on this device?
Thanks
Hi friends! Tablem im buy from AliExpress, difference i have android 7, in Ali now upgraded to 9 android. Howto install android 5.1 latest twrp with root??(scatter Hardware=Hex i have) i find old post on forum, but no one of posts help me, please step by step what i need to do, thank a lot. My tablet info:
Android 7.0
Bootloader unknown
Build id BK109_20171030
Java vm ART 2.1.0
OpenGL ES 2.0
Kernel Architekture armv7l
Kernel Version 3.18.35+
Root Access No
Mediatek MT8752, by online check its (MT6580)
Cores 8
Architekture 8x ARM Cortex-A7 @ 2.00 Ghz
Revision r0p3
Gpu vendor ARM
GPU Renderer Mali - 400MP
Scaling governor interactive
Model BK109
Manufactures BMXC
screen size 10.1 inches
Resolution 800x1280
density 209dpi
hardware mt8752
total ram 3756MB (4GB)
Inernal storage 58,76GB
Click to expand...
Click to collapse