Hi
XDAmanipulator does not find the PDA attached to the PC. With Hyperterm it can connect. As Portmon does also not indicate any activity on COM 2 (where the PDA is attached to), I guess that the COM auto find does not work correctly on my machine. Is there a way to tell XDAmani to use only COM 2 ??
COM problem
Just tried it on a other PC, there it works. On my main PC it does not show the screen "searching COM", it also does not say anything about found, it shows only reading from the phone, for hours
Re: COM problem
me said:
Just tried it on a other PC, there it works. On my main PC it does not show the screen "searching COM", it also does not say anything about found, it shows only reading from the phone, for hours
Click to expand...
Click to collapse
That's weird: it only says reading from the phone when it has found the XDA. So that's not your problem, apparently.
Well, if you say so :?
For your information: It is not a virtual COM like on a USB-RS232 adaptor. Just direct COM on the Board. But I do have some virtual COM in the system used by the Widecom BT Soft and ISDN CAPI (Fritz by AVM). I still think that XDAmani did not find the right device as Portmon (from sysintern) does not report any activity on COM2. If XDAmani thinks, that it found a XDA on a other port, will it go on searching ? I would suggest therefor a option like: Automatic COM selection or choosing a Port by yourself.
But it is any way a very, very nice Tool, Thanks !
Related
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
sometimes i just unplug and try again over and over, sometimes it takes up to five times, sometimes i even reboot my pc.... try that y arriba mexico ca.....nijos
i tried that and nothing happends =(
when i go to bootloader mode my computer recognize it as an unknow usb divice.
on settings>connection> USB TO PC i tried endable and disable the advance network functionality and nothing happend.
also i tried to relock the phone and put my custom rom (alltel) and also nothing happend..
do i need to change something on the phone?
Please help me ! =)!
Thx.
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
kdj67f said:
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
Click to expand...
Click to collapse
Yes, i tried on dmrouter and nothing happend, i have the drivers.
Yes, i have data adn phone, evreything works fine.
Iusacell support aGPS im 100% sure of that.
Do you have any recomendations on how can my computer will recognize my phone?
thx
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
kdj67f said:
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
Click to expand...
Click to collapse
I found it here
http://www.darkclockers.com/foros/showthread.php?t=7493
sorry but its in spanish, hope it works for you.
anyone can help me with my problem?? thx!!
One trick is to use a different USB port on the computer you are using. Also make sure that the computer has not added it in the Device Manager as an Unknown Device and placed a Yellow Exclamation point besides it. If so delete the item and then reboot.
Also, Im not so sure you really have the drivers installed.
You need to install microsoft activesync in order for your computer to have the right modem drivers.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
the computer dont recognize my phone, only on bootloader mode.=(
Have you tried to turn off Enable advanced network functionality? When I had issues with my computer seeing the phone, I unchecked this box and active sync would see the phone as well as I now could teather via USB.
Here is where to find Enable advanced network functionality:
Start/Settings/Connections/USB to PC/
Good luck
Re: QPST connection issue
shimele said:
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
Click to expand...
Click to collapse
Hi Shimele, give this a try. Go to device manager if using XP, should be same for Vista. Look for ports, expand it and you should see something new for your phone. Open up properties for it and then click on Advanced. You should see Port Settings and Advanced at the bottom. By default it may be a high port like com port 9, set it to com port 1 or com port 2. Then run QPST configuration and make sure it's listed in there. You may need to reseat your USB cable after making this change. Hope this helps you
thx all for you answares...
I think phone usb its broke, thats the only logical explanation.
I made my GPS lock in lees than 10 sec. so the usb its not a problem anymore.
I got GPS so fast because i change the radio to: 3.37.75
Thx!
Hola shimele.
I'm also in Mexico (DF) and using the exact config you're using (both laptop and Mogul in Iusacell). I've tried several DCD, Nue and generic roms and they sync with no problems for me.
So, let's start at the begining: you're using Vista, so make sure you've installed the Windows Mobile Device Center patch for Widows mobile. This replaces ActiveSync for Vista computers and can be downloaded here: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Follow the instructions and you should be fine.
If you want us to follow this offline, I'm available, just PM me or send me an e-mail, OK?
Saludos.
Hi.
Firstly, sorry about my English.
I am using HTC HD2 about 6 months. I was able to connect my phone with my pc by USB. But nowadays, i can't do it.
My PC is using Windows 7 64-bit.
Now, my problem is:
When i connect USB cable, there is no notification or sound in my PC. (like "a device connected to PC" or "a new hardware found" etc.)
Phone can be charged via USB connection with PC but I can't use activesync.
Otherwise, when i connect PC and phone by Bluetooth, i can use WMDC.
I controlled "USB to PC" module in my phone. I tried "enable faster data synchronization" checked and unchecked. And i checked "Ask me first..." But there is no effect
And also, i tried it in another PC (which is Vista) and another USB Cable.
And when i shut down the device, and i open it while pressing volume down button, bootloader opened but in bootloader screen there wasn't a text like "USB". There is a text "Serial".
I make hard reset but it doesn't effect too.
What do you think about my problem? May it be about USB input of my phone?
I used to make HSPL in my phone and he has custom rom now.
If the problem is a hardware problem, is it out of warranty? :S
Please help me.
Thanks.
buraakk said:
Hi.
Firstly, sorry about my English.
I am using HTC HD2 about 6 months. I was able to connect my phone with my pc by USB. But nowadays, i can't do it.
My PC is using Windows 7 64-bit.
Now, my problem is:
When i connect USB cable, there is no notification or sound in my PC. (like "a device connected to PC" or "a new hardware found" etc.)
Phone can be charged via USB connection with PC but I can't use activesync.
Otherwise, when i connect PC and phone by Bluetooth, i can use WMDC.
I controlled "USB to PC" module in my phone. I tried "enable faster data synchronization" checked and unchecked. And i checked "Ask me first..." But there is no effect
And also, i tried it in another PC (which is Vista) and another USB Cable.
And when i shut down the device, and i open it while pressing volume down button, bootloader opened but in bootloader screen there wasn't a text like "USB". There is a text "Serial".
I make hard reset but it doesn't effect too.
What do you think about my problem? May it be about USB input of my phone?
I used to make HSPL in my phone and he has custom rom now.
If the problem is a hardware problem, is it out of warranty? :S
Please help me.
Thanks.
Click to expand...
Click to collapse
It maybe because you are using Win 7 64 bit. Try installing 32 bit as well and see if it cures your problem.
Also see http://support.microsoft.com/kb/946765
Russ
Hi.
Thank you for your attention.
Unfortunately, i tried it, too. In another PC, whose OS is Vista 32-bit. There is no sound or notification at PC
Actually, i've searched so many topics in this forum.
And i am almost sure that my problem is a hardware problem.
Because i tried so many things in settings of PC and Phone but there is no change.
I just wanna ask you, guys, if i send my phone to service, is there any problem about my phone's HSPL and Custom ROM situtation??
So the problem is hardware problem and most probably my USP Port is damaged.
Do you think they tell me that "your phone is out of warranty bec. of HSPL!" ?
Thanks.
faulty cable or faulty usb port. search out the "stuck in car kit mode" thread and compare the symptoms.
I own an amazfit pace smartwatch,bought 2 weeks ago.When i connect it with my PC and laptop(windows 10 & 7) via usb cable they don't recognize it as hard disk in order to see watch folders and import some music following the correct instructions.I hear the characteristc sound when i connect usb.When i browse to device manager i notice that in windows 10 there is no problem with drivers but in windows 7 there are drivers missing.I try to use the download online function but with no result.I feel that is a very simple problem but i am very frustrated because i can't find any solution.Also i am really impressed that it isn't reported such a problem in your great forum,or i didn't notice it browsing the threads.Thank you in advance for your help!!!
Did you tried with restarting watch? Or maybe hard reset of watch? Try also another USB cable.
have same problem, try every pc, new and old windows .. one of the solution i clean the contact point behind the watch, is blocked with our dead skin
I face the same problem, I uninstall the driver from the device manager and re-plug again, now it can detect now.
i used new usb cable--> problem remains
i restarted watch-->problem remains
i cleaned the contact point-->problem remains
i uninstalled the driver(windows 10) and reinstalled it-->problem remains
i uninstalled the driver(windows 7) and reinstalled it-->PROBLEM SOLVED
But my main PC runs windows 10.There must be a simple solution...
the last solution so far is the hard reset.I will inform you when i try it..
I solved my problem. When you connect amazfit it will appear in devices and printers. When you right click it and open properties (somewhere there) you can change the driver from google nexus adb interface to USB composite device. Then It will appear as disk in my computer.
onisimos said:
i used new usb cable--> problem remains
i restarted watch-->problem remains
i cleaned the contact point-->problem remains
i uninstalled the driver(windows 10) and reinstalled it-->problem remains
i uninstalled the driver(windows 7) and reinstalled it-->PROBLEM SOLVED
But my main PC runs windows 10.There must be a simple solution...
the last solution so far is the hard reset.I will inform you when i try it..
Click to expand...
Click to collapse
Mine working on Windows 10, detected as MTP device. I do have ADB universal drivers installed but it also works on my Win 8 laptop with no additional drivers installed.
I'm suffering the same problem after many changes of rom and music uploading in the last months. Now the watch is not recognized (unknown device error 43) under 3 w10 PCs, different cables and usb ports. Cleaned contatcs and charging properly but no way to connect with the PC. Desperated...
Any help or piece of advice are welcome
onisimos said:
i used new usb cable--> problem remains
i restarted watch-->problem remains
i cleaned the contact point-->problem remains
i uninstalled the driver(windows 10) and reinstalled it-->problem remains
i uninstalled the driver(windows 7) and reinstalled it-->PROBLEM SOLVED
But my main PC runs windows 10.There must be a simple solution...
the last solution so far is the hard reset.I will inform you when i try it..
Click to expand...
Click to collapse
Could you please share the driver link by any chance? .....I couldn't find one ...as I saw from internet I need something like MTP driver...tho all the things are done manually .. so complicated..im using win10 64bit as well, a surface pro4 and my amazfit rom is 1.3.4f thank you!
Windows 10 comes with the MTP driver, so that is not the problem.
I have seen it numerous times that the watch charges but it doesn't get a pc connection.
It is always connected to a bad contact on the back.
Either you have to clean the contacts better or your dock is not working reliable.
A co worker of mine had that and he tried my dock and it worked, so he ordered a cheap one ( not that "bridge" thing ) from ali.
Working since then.
Problem solved
I had same issue but manage to resolve. Go to device manager - USB controllers - right click on the device not found - Update driver s/w - Browse my computer for driver s/w - Let me pick from a list - Untick "show compatible hardware" - Choose Manufacture: standard USB host Controller & Model: USB Composite Device - click next.
I don't know what happened to my Pace. I could connect to it with no problems until now (last PaceFIED I installed was rel 30). Back then (two weeks ago) everything went smoothly, but now when I connect my Pace, "adb devices" can't find the watch. Adb drivers are installed (minimal_adb_fastboot_v1.4_setup.exe). I have changed NOTHING on my computer since the last time I connected the watch, but now it can't find it.
I have cleaned the contacts, restarted the Pace... Nothing is helping. Anyone have any idea?
EDIT: Never mind. The post right above helped
quick fix
I had installed adb correctly so what I do ?
For me worked to clean pins in smartwatch gently with toothpick and after that connect it again to the docking station/charger.
I don't have your luck guys. Watch is new so clean (but I still tried to clean the pins), I have no "device not found" and not a single sound when connecting the watch on 3 different computers.
The charge indicators is showing tho... so the watch receive power from computer usb ports...
any idea ?
Has anyone tried changing the USB port settings to control power? It's in the device manager for the USB ports (properties). That worked for me (found it on the net with a similar issue)
I solved my problem with the most stupid change I could do...
I read somewhere (can't even find it) that some people have had problems with the original usb cable... After 5 hours of adb drivers installations, factory reset and whatever, I just remembered that sentence and changed my usb cable. Now it's working perfectly.
While it's so simple that you can think "how couldn't he think of that before?"
Answer is : the watch is charging so no reason to be suspicious...
That could help someone would just bought it...
I resolved this problem, just connected USB cable on other port.
zelitrex36 said:
I don't have your luck guys. Watch is new so clean (but I still tried to clean the pins), I have no "device not found" and not a single sound when connecting the watch on 3 different computers.
The charge indicators is showing tho... so the watch receive power from computer usb ports...
any idea ?
Click to expand...
Click to collapse
I have the same problem
greg_h_w said:
I have the same problem
Click to expand...
Click to collapse
As stated in my previous message, I'd solved my problem by plugging another USB cable. Did you try a wire of yours?
zelitrex36 said:
As stated in my previous message, I'd solved my problem by plugging another USB cable. Did you try a wire of yours?
Click to expand...
Click to collapse
Yeah, I already try to change the cable with another one, but still no luck. This is weird to me because before that I can use that cable to connect it with my PC and now it doesn't detect at all, only work for charging. And if I use that cable to connect phone it work normally
Hello everyone,
I read many useful information’s about this watch here on forum, however didn’t find solution for my case. I got a Xiaomi Amazfit. The watch is not charging or turning on. It is possible to connect it via USB cable to a Windows machine, the device stays as "unrecognized". My theory is that the ROM is hardly broken.
Here is my question: Is there a method to flash the watch via flashtool (or similar). All tutorials require the watch to be able to go to fastboot, and this can’t be done in this case. I can’t connect this as adb device also. I have done several times a flash procedure on phones that could not be turned on. Hope You can help me
Best regards Daniel
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
silver-alx said:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
Click to expand...
Click to collapse
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
jcyaoo said:
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
Click to expand...
Click to collapse
I already tried this. As i sead. I get the device detected on windows (unknown device). I presume someone tried to flash it on the past. I look for a way to copy software to it. Its not turning on (blackacrean).
Any ideas?
kantor_d said:
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
Click to expand...
Click to collapse
Look at the end of the thread
I disasembled the base Nd found lut thats 2 Pina where demaged. Its nowy functional but like i told you- its not turning on. Justyna this USB dvice in Windows is showing up (unknown device...)
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
kantor_d said:
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
Click to expand...
Click to collapse
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
kantor_d said:
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
silver-alx said:
kantor_d said:
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
Fix?
Did you fix it? And how?
kantor_d said:
silver-alx said:
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
I am with the same problem, only that my nor as unknown device it appears, simply connect in the pc and it does not change anything, it was after a flash that it erased and it did not return more
Click to expand...
Click to collapse
As I had had the same problem, I'll share my mysterious experiences. After I used pace for 1 month it become dead but while keep pushing power button, the white flash appear and then off. I changed the wall adaptor and then the watch revived.
For several days ago the watch gone dead and no white flash on when pushed power on 2 secs. anymore. I tried to change adaptor but nothing happen. I tried to clean the contact of both watch and ring, but it still dead.
Finally I switched the power cord from samsung mobile wire to Blackberry cord, it resurrected.
So I suggest you all to try changing the charging system may solve this problem.
Found a password locked device : VIVO Y69. MTK6750. i tried to unlock it using Tools such as MRT, Miracle box and others but was Unsuccessful. the problem is that , my PC/Laptop was unable to detect it.... yes, i have already installed all the necessary MTK drivers, such as DA USB, Vcom , Preloader and so on .....
well, when i connect the device to the USB ports, it shows the "Charged only" sign to the battery icon on the device without making a sound or detecting it , not in the Device Manager.
i think the owner puts the device to "Charged only option"...
Any idea to make it detect, i mean like the Test Point or something.
Thank you all..
K4bini.
As long as Android's USB service isn't configured as ADB and/or MTP phone won't get detected.
0
jwoegerbauer said:
As long as Android's USB service isn't configured as ADB and/or MTP phone won't get detected.
Click to expand...
Click to collapse
Wow, i see..... so any idea to go around to configured to ADB/MTP? ..... no right?.. ok....
Seppppx said:
You found that phone?
If it's not yours you should find the owner instead of trying to unlock the phone.
Just imagine if this happened to you.
If you are doing the right thing, try to see if the owner put some of his information to the emergency information of the device.
When the phone is on the lockscreen
1. Swipe up.
2. Click "EMERGENCY" on the bottom.
3. Double tap "EMERGENCY INFORMATION"
And you should see if the owner put anything in there.
This processes might be different depending on the custom OEM skin.
Click to expand...
Click to collapse
there's no emergency information on the device, and yes , the process of accessing emergency information varies on devices... besides, i search and research the internet, and no one have experienced what i had. i will try and figured out myself and post a story on xda once successful.